Arctic rockwall retreat rates estimated using laboratory‐calibrated ERT measurements of talus cones in Longyeardalen,Svalbard

Holocene rockwall retreat rates quantify integral values of rock slope erosion and talus cone evolution. Here we investigate Holocene rockwall retreat of exposed arctic sandstone cliffs in Longyeardalen, central Svalbard and apply laboratory‐calibrated electrical resistivity tomography (ERT) to determine talus sediment thickness. Temperature–resistivity functions of two sandstone samples are measured in the laboratory and compared with borehole temperatures from the talus slope. The resistivity of the higher and lower‐porosity sandstone at relevant borehole permafrost temperatures defines a threshold range that accounts for the lithological variability of the dominant bedrock and debris material. This helps to estimate the depth of the transition from higher resistivities of ice‐rich debris to lower resistivities of frozen bedrock in the six ERT transects. The depth of the debris–bedrock transition in ERT profiles is confirmed by a pronounced apparent resistivity gradient in the raw data plotted versus depth of investigation. High‐resolution LiDAR‐scanning and ERT subsurface information were collated in a GIS to interpolate the bedrock surface and to calculate the sediment volume of the talus cones. The resulting volumes were referenced to source areas to calculate rockwall retreat rates. The rock mass strength was estimated for the source areas. The integral rockwall retreat rates range from 0.33 to 1.96 mm yr^–1, and are among the highest rockwall retreat rates measured in arctic environments, presumably modulated by harsh environmental forcing on a porous sandstone rock cliff with a comparatively low rock mass strength. Here, we show the potential of laboratory‐calibrated ERT to provide accurate estimates of rockwall retreat rates even in ice‐rich permafrost talus slopes. Copyright © 2012 John Wiley & Sons, Ltd.     

10Be‐derived assessment of accelerated erosion in a glacially conditioned inner gorge,Entlebuch, Central Alps of Switzerland

Inner gorges often result from the propagation of erosional waves related to glacial/interglacial climate shifts. However, only few studies have quantified the modern erosional response to this glacial conditioning. Here, we report in situ ¹⁰Be data from the 64 km² Entlen catchment (Swiss Alps). This basin hosts a 7 km long central inner gorge with two tributaries that are >100 m‐deeply incised into thick glacial till and bedrock. The ¹⁰Be concentrations measured at the downstream end of the gorge yield a catchment‐wide erosion rate of 0.42 ± 0.04 mm yr^‐1, while erosion rates are consistently lower upstream of the inner gorge, ranging from 0.14 ± 0.01 mm yr^‐1 to 0.23 ± 0.02 mm yr^‐1. However, ¹⁰Be‐based sediment budget calculations yield rates of ~1.3 mm yr^‐1 for the inner gorge of the trunk stream. Likewise, in the two incised tributary reaches, erosion rates are ~2.0 mm yr^‐1 and ~1.9 mm yr^‐1. Moreover, at the erosional front of the gorge, we measured bedrock incision rates ranging from ~2.5 mm yr^‐1 to ~3.8 mm yr^‐1. These rates, however, are too low to infer a post‐glacial age (15–20 ka) for the gorge initiation. This would require erosion rates that are between 2 and 6 times higher than present‐day estimates. However, the downcutting into unconsolidated glacial till favored high erosion rates through knickzone propagation immediately after the retreat of the LGM glaciers, and subsequent hillslope relaxation led to a progressive decrease in erosion rates. This hypothesis of a two‐ to sixfold decrease in erosion rates does not conflict with the ¹⁰Be‐based erosion rate budgets, because the modern erosional time scale recorded by ¹⁰Be cover the past 2–3 ka only. These results point to the acceleration of Holocene erosion in response to the glacial overprint of the landscape. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of basin physical characteristics on solute fluxes in nine alpine/subalpine basins,Colorado, USA

Alpine/subalpine basins may exhibit substantial variability in solute fluxes despite many apparent similarities in basin characteristics. An evaluation of controls on spatial patterns in solute fluxes may allow development of predictive tools for assessing basin sensitivity to outside perturbations such as climate change or deposition of atmospheric pollutants. Relationships between basin physical characteristics, determined from geographical information system (GIS) tools, and solute fluxes and mineral weathering rates were explored for nine alpine/subalpine basins in Rocky Mountain National Park, Colorado, using correlation analyses for 1993 and 1994 data. Stream‐water nitrate fluxes were correlated positively with basin characteristics associated with the talus environment; i.e., the fractional amounts of steep slopes (≥ 30°), unvegetated terrain and young debris (primarily Holocene till) in the basins, and were correlated negatively with fractional amounts of subalpine meadow terrain. Correlations with nitrate indicate the importance of the talus environment in promoting nitrate flux and the mitigating effect of areas with established vegetation, such as subalpine meadows. Total mineral weathering rates for the basins ranged from about 300 to 600 mol ha^?1 year^?1. Oligoclase weathering accounted for 30 to 73% of the total mineral weathering flux, and was positively correlated with the amount of old debris (primarily Pleistocene glacial till) in the basins. Although calcite is found in trace amounts in bedrock, calcite weathering accounted for up to 44% of the total mineral weathering flux. Calcite was strongly correlated with steep slope, unvegetated terrain, and young debris—probably because physical weathering in steep‐gradient areas exposes fresh mineral surfaces that contain calcite for chemical weathering. Oligoclase and calcite weathering are the dominant sources of alkalinity in the basins. However, atmospherically deposited acids consume much of the alkalinity generated by weathering of calcite and other minerals in the talus environment. Published in 2001 by John Wiley & Sons, Ltd.     

Subglacial abrasion rates at Goldbergkees,Hohe Tauern,Austria, determined from cosmogenic 10Be and 36Cl concentrations

We report concentrations of cosmogenic ¹⁰Be and ³⁶Cl used to determine erosion depths in the recently deglaciated bedrock at Goldbergkees in the Eastern Alps. The glacier covered the sampling sites during the Little Ice Age (LIA) until c. 1940. The youngest ages calculated from these concentrations match the known exposure time after the post‐LIA exposure of <100 years. The apparent age (no cover, no erosion) of most samples, however, is significantly older. We show that the measured nuclide concentrations represent subglacial erosion depths, rather than exposure times. In particular, erosion depths calculated using ¹⁰Be and ³⁶Cl concentrations of individual samples match well, whereas apparent ³⁶Cl ages are consistently older than ¹⁰Be ages. The bedrock at the ‘youngest’ surfaces was deeply eroded (≥ 297 cm) by the Goldbergkees during the late Holocene. In contrast, bedrock at the margin of the LIA ice extent was eroded ≤35 cm. These values convert to subglacial erosion rates on the order of 0.1 mm/a to >5 mm/a. While modeled erosion rates depend on the duration of glacial cover and erosion intrinsic to the different exposure scenarios used for calculation (700–3300 years), modeled total erosion depths are insensitive (5–20% change). Analysis of erosion depths on the transverse valley profile shows a general trend of greatest erosion part way up the valley side and less erosion under thin ice at the lateral margin. A second profile along the valley axis indicates depth of erosion is greatest where the ice abuts the foot of the investigated bedrock riegel and at its lee side just beyond the crest. Copyright © 2016 John Wiley & Sons, Ltd.     

The structure and sedimentology of relict talus,Trotternish, northern Skye,Scotland

Sections up to 3·5 m deep cut through the upper rectilinear segment of relict, vegetated talus slopes at the foot of the Trotternish escarpment reveal stacked debris-flow deposits intercalated with occasional slopewash horizons and buried organic soils. Radiocarbon dating of buried soil horizons indicates that reworking of sediment by debris flows predates 5·9–5·6 Cal ka BP , and has been intermittently active throughout the late Holocene. Particle size analyses of 18 bulk samples from these units indicates that c. 27–30 per cent of the talus deposit is composed of fine (<2 mm) sediment. Sedimentological comparison with tills excludes a glacigenic origin for the talus debris, and the angularity of constituent clasts suggests that in situ weathering has been insignificant in generating fine material. We conclude that the fine sediment within the talus is derived primarily by granular weathering of the rockwall, with syndepositional accumulation of both fine and coarse debris, implying that c. 27–30 per cent of rockwall retreat since deglaciation reflects granular weathering rather than rockfall. The abundance of fines within the talus deposits is inferred to have been of critical importance in facilitating build-up of porewater pressures during rainstorms, leading to episodic failure and flow of debris on the upper parts of the slope. A wider implication of these findings is that the mechanical properties of talus slopes cannot be regarded as those of free-draining accumulations of coarse clasts, and that models that treat talus slopes as such have limited value in explaining their form and evolution. Our findings lend support to models that envisage the upper straight slope on talus accumulations as the product of mass-transport as well as rockfall, and indicate that episodic debris flow has been the primary agent of mass-transport at this site. © 1998 John Wiley & Sons, Ltd.     

Holocene Rockwall Retreat in Svalbard: A Triple-Rate Evolution

Volumetric calculations of slope deposits, direct measurements of rockwall retreat and chronological control based on lichenometry provide a wide range of rockwall retreat rates in Svalbard (0–1580 mm ka⁻¹) that appears consistent with previous evaluations from other Arctic areas. In northwest and central Spitsbergen (79°N), a triple-rate rockwall retreat is suggested for the last two millennia: very slow biogenic flaking (2 mm ka⁻¹), moderate retreat due to frost shattering (100 ka⁻¹) and rapid retreat associated with post-glacial stress relaxation (c. 1000 mm ka⁻¹). Examination of the distribution of various processes indicates that the Holocene retreat of most rockwalls has not exceeded one or two metres. Bedrock conditions appear to be the main control on retreat rates. The massiveness of igneous and metamorphic outcrops, widespread in Arctic shield areas, largely accounts for the slowness of rockwall retreat, which on these lithologies is primarily due to chemical and biological processes. More rapid rates are usually associated with stress relaxation following glacial surges or with local frost susceptibility of bedrock, often where faulting has induced high joint density. At such sites, rockwall retreat rates are of the same order of magnitude as those reported from Alpine areas (1000–3000 mm ka⁻¹) where both bedrock weakening due to tectonic stresses and the greater height of steep rockwalls account for the more rapid rockwall retreat rate. © 1997 by John Wiley & Sons, Ltd.     

Erosion in northwest Tibet from in‐situ‐produced cosmogenic 10Be and 26Al in bedrock

Concentrations of in‐situ‐produced cosmogenic nuclides ¹⁰Be and ²⁶Al in quartz were measured by accelerator mass spectrometry for bedrock basalts and sandstones located in northwest Tibet. The effective exposure ages range between 23 and 134 ka (¹⁰Be) and erosion rates between 4·0 and 24 mm ka^?1. The erosion rates are significantly higher than those in similarly arid Antarctica and Australia, ranging between 0·1 and 1 mm ka^?1, suggesting that precipitation is not the major control of erosion of landforms. Comparison of erosion rates in arid regions with contrasting tectonic activities suggests that tectonic activity plays a more important role in controlling long‐term erosion rates. The obtained erosion rates are, however, significantly lower than the denudation rate of 3000–6000 mm ka^?1 beginning at c. 5‐3 Ma in the nearby Godwin Austen (K2) determined by apatite fission‐track thermochronology. It appears that the difference in erosion rates within different time intervals is indicative of increased tectonic activity at c. 5–3 Ma in northwest Tibet. We explain the low erosion rates determined in this study as reflecting reduced tectonic activity in the last million years. A model of localized thinning of the mantle beneath northwest Tibet may account for the sudden increased tectonic activity at c. 5–3 Ma and the later decrease. Copyright © 2006 John Wiley & Sons, Ltd.     

Process–form relationships in Southern Italian badlands: erosion rates and implications for landform evolution

Characteristic badlands are incised into Plio‐Pleistocene clays in Basilicata, southern Italy, creating steep, scarp slopes with knife‐edge ridges (calanchi) and small dome‐shaped forms (biancane). Erosion pin data for the period 1997–2003 give mean annual erosion rates for dome‐shaped biancane in the range 9–19 mm a^?1, while rates for the calanchi scarps are lower, at 7–10 mm a^?1. The erosion pin data also show a non‐linear relationship with slope angle. Maximum erosion rates coincide with a slope angle of 35°, within an envelope defined by combining the theoretical effects of both rainsplash and surface weathering. Monitoring of surface changes and erosion rates for two 0·5 m² cleared swathes on biancane forms reveals a complex relationship between weathering and erosion. Characteristic forms can develop from large blocks of intact clay bedrock over a time period of less than 30 a. The implications of the measured erosion rates for the landform association of mountain front/pediment/domed inselberg are explored. Copyright © 2005 John Wiley & Sons, Ltd.     

Sediment storage and transport in Pancho Rico Valley during and after the Pleistocene‐Holocene transition,Coast Ranges of central California (Monterey County)

Factors influencing sediment transport and storage within the 156·6 km² drainage basin of Pancho Rico Creek (PRC), and sediment transport from the PRC drainage basin to its c. 11 000 km² mainstem drainage (Salinas River) are investigated. Numeric age estimates are determined by optically stimulated luminescence (OSL) dating on quartz grains from three sediment samples collected from a ‘quaternary terrace a (Qta)’ PRC terrace/PRC‐tributary fan sequence, which consists dominantly of debris flow deposits overlying fluvial sediments. OSL dating results, morphometric analyses of topography, and field results indicate that the stormy climate of the Pleistocene‐Holocene transition caused intense debris‐flow erosion of PRC‐tributary valleys. However, during that time, the PRC channel was backfilled by Qta sediment, which indicates that there was insufficient discharge in PRC to transport the sediment load produced by tributary‐valley denudation. Locally, Salinas Valley alluvial stratigraphy lacks any record of hillslope erosion occurring during the Pleistocene‐Holocene transition, in that the alluvial fan formed where PRC enters the Salinas Valley lacks lobes correlative to Qta. This indicates that sediment stripped from PRC tributaries was mostly trapped in Pancho Rico Valley despite the relatively moist climate of the Pleistocene‐Holocene transition. Incision into Qta did not occur until PRC enlarged its drainage basin by c. 50% through capture of the upper part of San Lorenzo Creek, which occurred some time after the Pleistocene‐Holocene transition. During the relatively dry Holocene, PRC incision through Qta and into bedrock, as well as delivery of sediment to the San Ardo Fan, were facilitated by the discharge increase associated with stream‐capture. The influence of multiple mechanisms on sediment storage and transport in the Pancho Rico Valley‐Salinas Valley system exemplifies the complexity that (in some instances) must be recognized in order to correctly interpret terrestrial sedimentary sequences in tectonically active areas. Copyright © 2009 John Wiley & Sons, Ltd.     

Natural recovery from accelerated forest ditch and stream bank erosion five years after harvesting of plantation forest on Plynlimon,mid‐Wales

Erosion rates surveyed using 230 erosion pins on 24 occasions over eight years (1994–2001) on forested stream banks, tributaries and forest ditches in the 0·89 km² Nant Tanllwyth catchment, part of the Hafren Forest on Plynlimon, mid‐Wales, showed statistically significant increases of up to 40 mm a^?1 in mean erosion rates during the two‐year period in which environmentally sensitive plot‐scale timber harvesting operations took place (1996–97). In the four years following timber harvesting mean erosion rates at all sites recovered to levels that were lower than before the harvesting operations began. This is attributed to increased light levels, following canopy removal, allowing vegetation to colonize exposed banks. There was a statistically significant relationship (p < 0·05) between mean erosion rate in 2000–01 (four years after harvesting) and percentage vegetation cover at erosion monitoring sites in the clearfelled (south tributaries) area though the same relationship did not hold for sites on the mainstream banks or for sites on the north (mature forest) ditch sites. The implications of natural vegetation colonization for management of such streams are discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

A conceptual model of supra‐glacial lake formation on debris‐covered glaciers based on GPR facies analysis

Supra‐glacial lakes and ponds can create hotspots of mass loss on debris‐covered glaciers. While much research has been directed at understanding lateral lake expansion, little is known about the rates or processes governing lake deepening. To a large degree, this knowledge gap persists due to sparse observations of lake beds. Here we report on the novel use of ground penetrating radar (GPR) surveys to simultaneously collect supra‐glacial lake bathymetry and bottom composition data from Spillway Lake (surface area of 2.4 × 10⁵ m²; volume of 9.5 × 10⁴ m³), which is located in the terminus region of the Ngozumpa Glacier in the Khumbu region of the Nepal Himalaya. We identified two GPR bottom signals corresponding to two sedimentary facies of (1) sub‐horizontal layered fine sediment drape and (2) coarse blocky diamict. We provide an understanding of the changes in subaqueous debris distribution that occur through stages of lake expansion by combining the GPR results with in situ observations of shoreline deposits matching the interpreted facies. From this, we present an updated conceptual model of supra‐glacial lake evolution, with the addition of data on the evolving debris environment, showing how dominant depositional processes can change as lakes evolve from perched lakes to multi‐basin base‐level lakes and finally onto large moraine‐dammed lakes. Throughout lake evolution, processes such as shoreline steepening, lakebed collapse into voids and conduit interception, subaerial and subaqueous calving and rapid areal expansion alter the spatial distribution and makeup of lakebed debris and sediments forcing a number of positive and negative feedbacks on lake expansion. Copyright © 2016 John Wiley & Sons, Ltd.     

Stratigraphic records of tsunamis along the Japan Sea,southwest Hokkaido,northern Japan

The stratigraphy of tsunami deposits along the Japan Sea, southwest Hokkaido, northern Japan, reveals tsunami recurrences in this particular area. Sandy tsunami deposits are preserved in small valley plains, whereas gravelly deposits of possible tsunami origin are identified in surficial soils covering a Holocene marine terrace and a slope talus. At least five horizons of tsunami events can be defined in the Okushiri Island, the youngest of which immediately overlies the Ko‐d tephra layer (1640 AD) and was likely formed by the historical Oshima‐Ohshima tsunami in 1741 AD. The four older tsunami deposits, dated using accelerator mass spectrometry ¹⁴C, were formed at around the 12th century, 1.5–1.6, 2.4–2.6, and 2.8–3.1 ka, respectively. Tsunami sand beds of the 1741 AD and circa 12th century events are recognized in the Hiyama District of Hokkaido Island, but the older tsunami deposits are missing. The deposits of these two tsunamis are found together at the same sites and distributed in regions where wave heights of the 1993 tsunami (Hokkaido Nansei‐oki earthquake, Mw = 7.7) were less than 3 m. Thus, the 12th century tsunami waves were possibly generated near the south of Okushiri Island, whereas the 1993 tsunami was generated towards the north of the island. The estimated recurrence intervals of paleotsunamis, 200–1100 years with an average of 500 years, likely represents the recurrence interval of large earthquakes which would have occurred along several active faults offshore of southwest Hokkaido.     

Strong variation in weathering of layered rock maintains hillslope‐scale strength under high precipitation

The evolution of volcanic landscapes and their landslide potential are both dependent upon the weathering of layered volcanic rock sequences. We characterize critical zone structure using shallow seismic V_p and V_s profiles and vertical exposures of rock across a basaltic climosequence on Kohala peninsula, Hawai’i, and exploit the dramatic gradient in mean annual precipitation (MAP) across the peninsula as a proxy for weathering intensity. Seismic velocity increases rapidly with depth and the velocity–depth gradient is uniform across three sites with 500–600 mm/yr MAP, where the transition to unaltered bedrock occurs at a depth of 4 to 10 m. In contrast, velocity increases with depth less rapidly at wetter sites, but this gradient remains constant across increasing MAP from 1000 to 3000 mm/yr and the transition to unaltered bedrock is near the maximum depth of investigation (15–25 m). In detail, the profiles of seismic velocity and of weathering at wet sites are nowhere monotonic functions of depth. The uniform average velocity gradient and the greater depths of low velocities may be explained by the averaging of velocities over intercalated highly weathered sites with less weathered layers at sites where MAP > 1000 mm/yr. Hence, the main effect of climate is not the progressive deepening of a near‐surface altered layer, but rather the rapid weathering of high permeability zones within rock subjected to precipitation greater than ~1000 mm/yr. Although weathering suggests mechanical weakening, the nearly horizontal orientation of alternating weathered and unweathered horizons with respect to topography also plays a role in the slope stability of these heterogeneous rock masses. We speculate that where steep, rapidly evolving hillslopes exist, the sub‐horizontal orientation of weak/strong horizons allows such sites to remain nearly as strong as their less weathered counterparts at drier sites, as is exemplified by the 50°–60° slopes maintained in the amphitheater canyons on the northwest flank of the island. Copyright © 2017 John Wiley & Sons, Ltd.     

Cosmogenic nuclide‐derived rates of diffusive and episodic erosion in the glacially sculpted upper Rhone Valley,Swiss Alps

Denudation rates of small tributary valleys in the upper Rhone valley of the Swiss Central Alps vary by more than an order of magnitude within a very small distance (tens of kilometers). Morphometric data indicate two distinct erosion processes operate in these steep mountain valleys. We determined the rates of these processes using cosmogenic beryllium‐10 (¹⁰Be) in pooled soil and stream sediment samples. Denudation in deep, glacially scoured valleys is characterized by rapid, non‐uniform processes, such as debris flows and rock falls. In these steep valleys denudation rates are 760–2100 mm kyr^?1. In those basins which show minimal previous glacial modification denudation rates are low with 60–560 mm kyr^?1. The denudation rate in each basin represents a binary mixture between the rapid, non‐uniform processes, and soil creep. The soil production rate measured with cosmogenic ¹⁰Be in soil samples averages at 60 mm kyr^?1. Mixing calculations suggest that the debris flows and rock falls are occurring at rates up to 3000–7000 mm kyr^?1. These very high rates occur in the absence of baselevel lowering, since the tributaries drain into the Rhone trunk stream up‐stream of a knickzone. The flux‐weighted spatial average of denudation rates for the upper Rhone valley is 1400 mm kyr^?1, which is similar to rock uplift rates determined in this area from leveling. The pace and location of erosion processes are determined by the oscillation between a glacial and a non‐glacial state, preventing the landscape from reaching equilibrium. Copyright © 2010 John Wiley & Sons, Ltd.     

Supra‐glacial deposition and flux of catastrophic rock–slope failure debris,south‐central Alaska

The ongoing debate over the effects of global environmental change on Earth's cryosphere calls for detailed knowledge about process rates and their variability in cold environments. In this context, appraisals of the coupling between glacier dynamics and para‐glacial erosion rates in tectonically active mountains remain rare. We contribute to filling this knowledge gap and present an unprecedented regional‐scale inventory of supra‐glacial sediment flux and hillslope erosion rates inferred from an analysis of 123 large (> 0·1 km²) catastrophic bedrock landslides that fell onto glaciers in the Chugach Mountains, Alaska, as documented by satellite images obtained between 1972 to 2008. Assuming these supra‐glacial landslide deposits to be passive strain markers we infer minimum decadal‐scale sediment yields of 190 to 7400 t km^–2 yr^–1 for a given glacier‐surface cross‐section impacted by episodic rock–slope failure. These rates compare to reported fluvial sediment yields in many mountain rivers, but are an order of magnitude below the extreme sediment yields measured at the snouts of Alaskan glaciers, indicating that the bulk of debris discharged derives from en‐glacial, sub‐glacial or ice‐proximal sources. We estimate an average minimum para‐glacial erosion rate by large, episodic rock–slope failures at 0·5–0·7 mm yr^–1 in the Chugach Mountains over a 50‐yr period, with earthquakes likely being responsible for up to 73% of this rate. Though ranking amongst the highest decadal landslide erosion rates for this size of study area worldwide, our inferred rates of hillslope erosion in the Chugach Mountains remain an order of magnitude below the pace of extremely rapid glacial sediment export and glacio‐isostatic surface uplift previously reported from the region. Copyright © 2012 John Wiley & Sons, Ltd.     

Persistence of road runoff generation in a logged catchment in Peninsular Malaysia

Measurements of saturated hydraulic conductivity (K_s) and diagnostic model simulations show that all types of logging road/trail in the 14·4 ha Bukit Tarek Experimental Catchment 3 (BTEC3) generate substantial Horton overland flow (HOF) during most storms, regardless of design and level of trafficking. Near‐surface K_s(0–0·05 m) on the main logging road, skid trails and newly constructed logging terraces was less than 1, 2 and 34 mm h^?1, respectively. Near‐surface K_s on an abandoned skid trail in an adjacent basin was higher (62 mm h^?1), owing to the development of a thin organic‐rich layer on the running surface over the past 40 years. Saturated hydraulic conductivity measured at 0·25 m below the surface of all roads was not different (all <6 mm h^?1) and corresponded to the K_s of the adjacent hillslope subsoil, as most roads were excavated into the regolith more than 0·5–1 m. After 40 years, only limited recovery in near‐surface K_s occurred on the abandoned skid trail. This road generated HOF after the storage capacity of the upper near‐surface layer was exceeded during events larger than about 20 mm. Thus, excavation into low‐K_s substrate had a greater influence on the persistence of surface runoff production than did surface compaction by machinery during construction and subsequent use during logging operations. Overland flow on BTEC3 roads was also augmented by the interception of shallow subsurface flow traveling along the soil–saprolite/bedrock interface and return flow emerging from the cutbank through shallow biogenic pipes. The most feasible strategy for reducing long‐term road‐related impacts in BTEC3 is limiting the depth of excavation and designing a more efficient road network, including minimizing the length and connectivity of roads and skid trails. Copyright © 2007 John Wiley & Sons, Ltd.     

Holocene flood histories in south‐western USA

River basins in south‐western USA are some of the most extensively studied arid land fluvial systems in the world. Since the early 1960s their hydro‐climatic histories have been reconstructed from the analysis of alluvial cut‐and‐fill cycles, while from the late 1970s there have been investigations of slackwater deposits and palaeostage indicators for large floods in stable‐boundary bedrock reaches. However, no studies have regionally integrated Holocene fluvial histories from these two different types of fluvial environments. The current study combines the alluvial archive with flood records from bedrock reaches to generate a probability‐based 12,000 year record of flooding in south‐western USA. Using more than 700 ¹⁴C‐dated fluvial units, the analysis produces a high resolution (centennial) flood record. Seven episodes of increased flooding occurred at 11,250–10,400, 8800–8350, 8230–7600, 6700–5700, 5600–4820, 4550–3320 and 2000–0 cal. BP. Bedrock reaches are found to record more frequent floods during the middle to late Holocene, while in alluvial rivers more flood units are dated to the early and middle Holocene. These differences are primarily the result of selective preservation with alluvial reaches tending to erode during periods characterised by very large floods. Episodes of major Holocene flooding recorded in slackwater deposits within bedrock systems correspond with periods of increased precipitation in the region and lower temperatures. In contrast, within alluvial rivers above‐average flooding probabilities, as well as regionally extensive channel entrenchment episodes, match with reduced annual precipitation and lower temperatures. The results of this study clearly demonstrate the value of the Holocene fluvial archive for reconstructing regional, short‐term hydro‐climatic change in south‐western USA. Copyright © 2010 John Wiley & Sons, Ltd.     

Role of bedrock groundwater in the rainfall–runoff process in a small headwater catchment underlain by volcanic rock

The role of bedrock groundwater in rainfall–runoff processes is poorly understood. Hydrometric, tracer and subsurface water potential observations were conducted to study the role of bedrock groundwater and subsurface flow in the rainfall–runoff process in a small headwater catchment in Shiranui, Kumamoto prefecture, south‐west Japan. The catchment bedrock consists of a strongly weathered, fractured andesite layer and a relatively fresh continuous layer. Major chemical constituents and stable isotopic ratios of δ¹⁸O and δD were analysed for spring water, rainwater, soil water and bedrock groundwater. Temporal and spatial variation in SiO₂ showed that stream flow under the base flow condition was maintained by bedrock groundwater. Time series of three components of the rainstorm hydrograph (rainwater, soil water and bedrock groundwater) separated by end member mixing analysis showed that each component fluctuated during rainstorm, and their patterns and magnitudes differed between events. During a typical mid‐magnitude storm event, a delayed secondary runoff peak with 1·0 l s⁻¹ was caused by increase in the bedrock groundwater component, whereas during a large rainstorm event the bedrock groundwater component increased to ≈ 2·5 l s⁻¹. This research shows that the contribution of bedrock groundwater and soil water depends strongly on the location of the groundwater table, i.e. whether or not it rises above the soil–bedrock interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Erosion history of the Tibetan Plateau since the last interglacial: constraints from the first studies of cosmogenic 10Be from Tibetan bedrock

The cosmogenic ¹⁰Be exposure histories of in situ bedrock surfaces from the Tibetan Plateau indicate low erosion rates of <30 mm/ka in southern and central Tibet during the last interglacial–glacial cycle that contrast strongly with unusually rapid erosion rates (60–2000 mm/ka) for Kunlun in northern Tibet during the Holocene, comparable with published values from the Himalaya. By comparing apatite fission-track ages with cosmogenic data, erosion rates in southern Tibet appear to be decelerating since the Miocene, whereas in the Kunlun, erosion rates have accelerated over the same timescale. Such secular changes suggest that the southern and central regions of the plateau had formed their present flat relief by the Pleistocene. Unusually high erosion rates along the northern margin of the plateau may reflect intense tectonic activity during the Holocene. These findings indicate that over much of the high plateau erosion rates are exceptionally low, and therefore the sources of detritus carried by the great Asian rivers that rise in Tibet lie overwhelmingly in bedrocks at lower altitudes. This study illustrates the potential of cosmogenic studies for unraveling the most recent phase of the erosion/exhumation history of orogenic belts that cannot be resolved by either Ar-isotope or fission-track thermochronometers.     

A 13‐year record of erosion on badland sites in the Karoo,South Africa

Land degradation in South Africa has been of concern for more than 100 years with both climate change and inappropriate land management (overgrazing) being proposed as primary drivers. However, there are few quantitative studies of degradation and, in particular, few of erosion by water. Badlands, taken here to be the landform which results from extreme erosion, have been notably neglected. We report on 13 consecutive years of erosion pin measurements of badland erosion on 10 study sites in the Sneeuberg uplands of the eastern Karoo in South Africa. The study sites are on Holocene colluvium which mantles footslopes. They have been subject to overgrazing for at least 100 years, c. 1850–1950. Currently they are lightly grazed by sheep. The area receives about 500 mm rainfall per year. The sites are remote, with only informal, farmer‐operated, daily raingauges nearby. The nearest sub‐daily raingauge is c. 55 km distant. Also we report on an analysis of the erosion pin data which focuses on establishing the origins and context of the badlands, including the relationship between study sites and adjacent valley‐bottom gully systems; compare erosion rates on our study sites with rates determined by erosion pins on other badland sites; and discuss the implications of these erosion rates for landscape development and off‐site impacts. Net erosion rates on the study sites are relatively high compared with global badland rates and range from 3.1 to 8.5 mm yr^‐1 which may be extrapolated to 53 to 145 t ha yr^‐1 (using a measured bulk density of 1.7 g cm^‐3). However, comparisons with badland sites elsewhere are difficult because of different measuring methodologies, lithologies, climate and dominant processes. Erosion rates on the study sites are strongly influenced by rainfall amounts and, in particular, by daily rainfall events which exceed ~10 mm: this is the threshold intensity at which runoff has been observed to commence on badlands. Of significance, but of lesser influence, is weathering, mainly by wetting and drying: this prepares bare surfaces for erosion. However, questions remain regarding the role of site characteristics, and of processes at each site, in determining between‐site differences in erosion rate. Crude extrapolation of current rates of erosion, in conjunction with depths of incision into the badlands, suggests that badland development started around 200 years ago, probably as a response to the introduction of European‐style stock farming which resulted in overgrazing. We assume, but cannot quantify, the additional influence of periods of drought and burning in the erosional history of the area. Intermittent connection of these badlands to valley‐bottom gullies and therefore to small farm dams and ultimately to large water storage reservoirs increases their impact on local water resources. Copyright © 2015 John Wiley & Sons, Ltd.