埕岛海区水下岸坡沉积物不稳定运动的区域差异性

埕岛海区水下岸坡是海底不稳定活动的频发地带,存在着海底差异冲蚀、残留岗丘、沉积物块体运动等灾害地质,对海上工程设施造成极大威胁。通过对海区多波束、声呐、浅剖等声学调查资料的分析,结合前人研究成果,对水下岸坡沉积物块体运动的区域差异性进行了研究。认为埕岛水下岸坡区沉积物块体运动极为发育,受海区波浪诱发因素的控制,岸坡上部水深3~6 m的区域中,海底沉积物块体运动沿坡向深水方向水平运动的趋势明显,对海洋工程设施影响较大;岸坡下部,沉积物块体运动主要表现为向深部地层的扰动和区域性的失水塌陷压实作用。     

埕岛油田海域海底沉积特征与工程地质特性

详细阐述了埕岛油田海域海底沉积和冲淤特征,介绍了沉积物的成分、类型和分布特征,并综合描述了埕岛海域海底地貌形态和海底沉积物的物理力学特性,上述研究对埕岛油田的进一步研究和开发有指导意义。     

黄河水下三角洲沉积物输运及海底冲淤研究

根据黄河水下三角洲的特点,建立了一个垂直平均二维沉积物输运数学模型,结合潮流和沉积物资料,模拟研究了沉积物输运机制和海底冲淤演变过程。模拟结果表明,垂直河口射流的潮流决定了本区沉积物净输运的总体格局,风应力对悬浮泥沙和推移质泥沙运动也起到重要作用。潮流底应力和活动层厚度分布表明,黄河口门和埕岛油田附近海域是潮流底应力和活动层厚度高值区,为沉积物活跃区,海底稳定性弱,易于侵蚀再搬运。冲淤计算表明,埕岛油田附近海域为冲刷中心区;现在河口水下三角洲在断流时为冲刷区,正常行河时则转为淤积区。     

埕岛油田海域波—底相互作用

基于1976，1993年埕岛油田海域测深资料，应用HISWA浅水海浪数值计算模式，研究风暴浪入侵该海域导致的波-底相互作用后果。数值计算结果表明，海区固定点海底冲刷导致波场强化；波参数增量与冲刷深度有关；海底水质点轨道流速峰值，底摩擦耗散峰值及临界波高值相对水深分布均表明，该海域深水区海底冲刷将减弱，浅水区海底冲刷将加强。     

埕岛海域水深地形特征及冲淤规律探讨

介绍了埕岛海域水深及地形特征,简述了埕岛海域经历的快速冲刷、缓慢冲刷及冲淤调整的３个阶段,探讨了位于局部高部位、平坦海底及过渡地带３种井场的冲淤规律。     

埕岛海域水深地形特征及冲淤规律探讨

介绍了埕岛海域水深及地形特征,简述了埕岛海域经历的快速冲刷、缓慢冲刷及冲淤调整的3个阶段,探讨了位于局部高部位、平坦海底及过渡地带3种井场的冲淤规律.     

黄河三角洲埕岛海域底质特征与泥沙净输运研究

本文通过对黄河三角洲埕岛海域146个表层样的粒度分析,表明该区有5种沉积物类型,以砂质粉砂为主体,呈斑块状分布,极细砂与粗粉砂是沉积物的主要粒级,普遍分选差。运用"粒径趋势"分析的方法,分析探讨了埕岛海域表层沉积物净输运趋势。研究区的沉积物的净输运趋势大致以12 m水深为界,深水区沉积物的净输运趋势向岸,12 m以浅海域的沉积物具有离岸的净输运趋势,说明深水区沉积物受冬季风浪作用向岸运移作用显著,12 m以浅海域的沉积物受夏季风浪作用离岸运移作用显著,沉积物运移的季节变化已成为研究区海域沉积物净运移的主要控制因素。     

黄河三角洲埕岛海域底质特征与泥沙净输运研究

本文通过对黄河三角洲埕岛海域146个表层样的粒度分析,表明该区有5种沉积物类型,以砂质粉砂为主体,呈斑块状分布,极细砂与粗粉砂是沉积物的主要粒级,普遍分选差.运用"粒径趋势"分析的方法,分析探讨了埕岛海域表层沉积物净输运趋势.研究区的沉积物的净输运趋势大致以12 m水深为界.深水区沉积物的净输运趋势向岸,12 m以浅海域的沉积物具有离岸的净输运趋势,说明深水区沉积物受冬季风浪作用向岸运移作用显著,12 m以浅海域的沉积物受夏季风浪作用离岸运移作用显著,沉积物运移的季节变化已成为研究区海域沉积物净运移的主要控制因素.     

胜利埕岛海域海底松软沉积物声学探测方法探讨

胜利埕岛海域位于复杂的黄河三角洲沉积体系中．由于黄河的断流,在风浪和海流作用下原三角洲体系受到侵蚀．在部分海底具有松散沉积物沉积。采用侧扫声纳、双频测深仪及浅地层剖面仪3种海上物探方法,对埕岛海域海底松软沉积物进行声学探测,确定了浮泥、软土层顶、海底界面及浮泥和软土层和海底界面及浮泥和软土层的厚度,研究了埕岛海域海底松软沉积物的基本分布变化规律,为今后海洋工程地质勘察海底松软沉积物奠定了基础。     

淤泥质粉砂海底典型平台桩基冲刷

通过黄河三角洲埕岛海域2个典型平台桩柱周围实测水深及海流、波浪资料,研究了淤泥质粉砂海底桩柱周围局部冲刷坑的特征及其发展演化情况,并结合水动力条件对其形成机制进行分析。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.