The simulation of heat and water exchange in the boreal spruce forest by the land-surface model SWAP

All previous versions of a physically based land-surface model SWAP have assumed for simplicity that vegetation is fully covered by snow during the cold season. Such assumption is reasonable only for the regions dominated by short vegetation or for warm climates where snow processes are absent. The major goals of this paper are (i) modification of the latest version of SWAP by incorporation of tall vegetation into the cold-season parameterizations to make the model applicable for simulating heat and water transfer within a boreal forest biome and (ii) validation of the modified version using the data from a forested catchment located in the boreal zone. Modification of SWAP required to parameterize radiative and turbulent exchange between the forest crown and forest floor, partitioning snowfall between interception by the canopy (in doing so, snow interception differs from rain interception) and falling to the ground, formation of snow cover on the forest crown and forest floor including snow accumulation (both in solid and liquid fractions), snow evaporation, and snowmelt. The advanced model was validated using a set of hydrometeorological data measured during 18 years (1966–1983) at the Tayozhniy catchment (covered by boreal spruce forest), Valdai, Russia. Simulations of annual and monthly snow/rain interception, daily runoff at the catchment outlet, snow density, snow depth, snow water equivalent, soil water storage in three layers (0–20, 0–50 and 0–100 cm), and monthly evapotranspiration from the catchment were compared with observations. Analysis of the results of validation shows that the new version of the model SWAP reproduces the heat and water exchange processes occurring in mid-latitude boreal forest quite reasonable.     

Reducing monitoring gaps at the aquifer–river interface by modelling groundwater–surface water exchange flow patterns

This study investigates spatial patterns and temporal dynamics of aquifer–river exchange flow at a reach of the River Leith, UK. Observations of sub‐channel vertical hydraulic gradients at the field site indicate the dominance of groundwater up‐welling into the river and the absence of groundwater recharge from surface water. However, observed hydraulic heads do not provide information on potential surface water infiltration into the top 0–15 cm of the streambed as these depths are not covered by the existing experimental infrastructure. In order to evaluate whether surface water infiltration is likely to occur outside the ‘window of detection’, i.e. the shallow streambed, a numerical groundwater model is used to simulate hydrological exchanges between the aquifer and the river. Transient simulations of the successfully validated model (Nash and Sutcliff efficiency of 0·91) suggest that surface water infiltration is marginal and that the possibility of significant volumes of surface water infiltrating into non‐monitored shallow streambed sediments can be excluded for the simulation period. Furthermore, the simulation results show that with increasing head differences between river and aquifer towards the end of the simulation period, the impact of streambed topography and hydraulic conductivity on spatial patterns of exchange flow rates decreases. A set of peak flow scenarios with altered groundwater‐surface water head gradients is simulated in order to quantify the potential for surface water infiltration during characteristic winter flow conditions following the observation period. The results indicate that, particularly at the beginning of peak flow conditions, head gradients are likely to cause substantial increase in surface water infiltration into the streambed. The study highlights the potential for the improvement of process understanding of hyporheic exchange flow patterns at the stream reach scale by simulating aquifer‐river exchange fluxes with a standard numerical groundwater model and a simple but robust model structure and parameterization. Copyright © 2011 John Wiley & Sons, Ltd.     

湖-气热传输模型及参数敏感性研究

在一维涡扩散模型的基础上,发展了考虑冬天结冰和夏天蒸发等水体相变问题及对流混合过程的湖-气热传输模型.模型采用焓代替温度作为预报变量,这也更加方便处理水的相变问题.模型的计算结果与以色列Kinneret湖的观测资料进行对比,验证了模型的合理性,说明了加入对流混合过程是符合湖-气热传输的实际物理机制的.对风速和湖面摩擦速度作了敏感性实验,证明他们对湖面温度和蒸发潜热有着重要的影响.     

Effects of frozen soil and snow cover on cold‐season soil water dynamics in Tokachi,Japan

Despite the potential impact of winter soil water movements in cold regions, relatively few field studies have investigated cold‐season hydrological processes that occur before spring‐onset of snowmelt infiltration. The contribution of soil water fluxes in winter to the annual water balance was evaluated over 5 years of field observations at an agricultural field in Tokachi, Hokkaido, Japan. In two of the winters, soil frost reached a maximum depth of 0·2 m (‘frozen’ winters), whereas soil frost was mostly absent during the remaining three winters (‘unfrozen’ winters). Significant infiltration of winter snowmelt water, to a depth exceeding 1·0 m, occurred during both frozen and unfrozen winters. Such infiltration ranged between 126 and 255 mm, representing 28–51% of total annual soil water fluxes. During frozen winters, a substantial quantity of water (ca 40 mm) was drawn from deeper layers into the 0–0·2 m topsoil layer when this froze. Under such conditions, the progression and regression of the freezing front, regulated by the thickness of snow cover, controlled the quantity of soil water flux below the frozen layer. During unfrozen winters, 13–62 mm of water infiltrated to a depth of 0·2 m, before the spring snowmelt. These results indicate the importance of correctly evaluating winter soil water movement in cold regions. Copyright © 2010 John Wiley & Sons, Ltd.     

Coupled groundwater flow and heat transport simulation for estimating transient aquifer–stream exchange at the lowland River Spree (Germany)

Subsurface flow and heat transport near Freienbrink, NE Germany, was simulated in order to study groundwater–surface water exchange between a floodplains aquifer and a section of the lowland River Spree and an adjacent oxbow. Groundwater exfiltration was the dominant process, and only fast surface water level rises resulted in temporary infiltration into the aquifer. The main groundwater flow paths are identified based on a 3D groundwater flow model. To estimate mass fluxes across the aquifer–surface water interfaces, a 2D flow and heat transport modelling approach along a transect of 12 piezometers was performed. Results of steady‐state and transient water level simulations show an overall high accuracy with a Spearman coefficient ρ = 0.9996 and root mean square error (RMSE) = 0.008 m. Based on small groundwater flow velocities of about 10^?7 to 10^?6 ms^?1, mean groundwater exfiltration rates of 233 l m^?2 d^?1 are calculated. Short periods of surface water infiltration into the aquifer do not exceed 10 days, and the infiltration rates are in the same range. The heat transport was modelled with slightly less accuracy (ρ = 0.8359 and RMSE = 0.34 °C). In contrast to the predominant groundwater exfiltration, surface water temperatures determine the calculated temperatures in the upper aquifer below both surface water bodies down to 10 m during the whole simulation period. These findings emphasize prevailing of heat conduction over advection in the upper aquifer zones, which seems to be typical for lowland streams with sandy aquifer materials and low hydraulic gradients. Moreover, this study shows the potential of coupled numerical flow and heat transport modelling to understand groundwater–surface water exchange processes in detail. Copyright © 2013 John Wiley & Sons, Ltd.     

A large weighing lysimeter for evapotranspiration and soil‐water–groundwater exchange studies

A large weighing lysimeter was installed at Yucheng Comprehensive Experimental Station, north China, for evapotranspiration and soil‐water–groundwater exchange studies. Features of the lysimeter include the following: (i) mass resolution equivalent to 0·016 mm of water to accurately and simultaneously determine hourly evapotranspiration, surface evaporation and groundwater recharge; (ii) a surface area of 3·14 m² and a soil profile depth of 5·0 m to permit normal plant development, soil‐water extraction, soil‐water–groundwater exchanges, and fluctuations of groundwater level; (iii) a special supply–drainage system to simulate field conditions of groundwater within the lysimeter; (iv) a soil mass of about 30 Mg, including both unsaturated and saturated loam. The soil consists mainly of mealy sand and light loam. Monitoring the vegetated lysimeter during the growing period of winter wheat, from October 1998 through to June 1999, indicated that during the period groundwater evaporation contributed 16·6% of total evapotranspiration for a water‐table depth from 1·6 m to 2·4 m below ground surface. Too much irrigation reduced the amount of upward water flow from the groundwater table, and caused deep percolation to the groundwater. Data from neutron probe and tensiometers suggest that soil‐water‐content profiles and soil‐water‐potential profiles were strongly affected by shallow groundwater. Copyright © 2000 John Wiley & Sons, Ltd.     

Influence of grass soil cover on water runoff and soil detachment under rainfall simulation in a sub‐humid South African degraded rangeland

In most regions of the world overgrazing plays a major role in land degradation and thus creates a major threat to natural ecosystems. Several feedbacks exist between overgrazing, vegetation, soil infiltration by water and soil erosion that need to be better understood. In this study of a sub‐humid overgrazed rangeland in South Africa, the main objective was to evaluate the impact of grass cover on soil infiltration by water and soil detachment. Artificial rains of 30 and 60 mm h^?1 were applied for 30 min on 1 m² micro‐plots showing similar sandy‐loam Acrisols with different proportions of soil surface coverage by grass (Class A: 75–100%; B: 75–50%; C: 50–25%; D: 25–5%; E: 5–0% with an outcropping A horizon; F: 0% with an outcropping B horizon) to evaluate pre‐runoff rainfall (Pr), steady state water infiltration (I), sediment concentration (SC) and soil losses (SL). Whatever the class of vegetal cover and the rainfall intensity, with the exception of two plots probably affected by biological activity, I decreased regularly to a steady rate <2 mm h^?1 after 15 min rain. There was no significant correlation between I and Pr with vegetal cover. The average SC computed from the two rains increased from 0·16 g L^?1 (class A) to 48·5 g L^?1 (class F) while SL was varied between 4 g m^?2 h^?1 for A and 1883 g m^?2 h^?1 for F. SL increased significantly with decreasing vegetal cover with an exponential increase while the removal of the A horizon increased SC and SL by a factor of 4. The results support the belief that soil vegetation cover and overgrazing plays a major role in soil infiltration by water but also suggest that the interrill erosion process is self‐increasing. Abandoned cultivated lands and animal preferred pathways are more vulnerable to erosive processes than simply overgrazed rangelands. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of soil‐surface types on the overall runoff of the Tabernas badlands (south‐east Spain): field data and model approaches

The Tabernas desert, an extensive badlands area in Almeria province (south‐east Spain), is characterized by a high variability in soil surface cover and soil properties along with important topographical contrasts giving rise to a wide range of hydrological behaviour. A double approach through field monitoring and modelling has been used to ascertain the influence of soil‐surface variability on the overall hydrological response. Small plots were monitored for 3 years to assess runoff from the different surface types. Data provided by the long‐term monitoring of three small catchments formed by different soil surfaces were used to find out the specific contribution of each soil surface to the catchment runoff. A simple spatially distributed model was built to predict runoff generation based on the infiltration rate of each soil‐surface type (defined as terrain units with the same cover, the same soil type and on the same landform). Plot results prove that the soil surface units within the study area behave differently in terms of hydrological response to natural rainfall. These responses are explained by the types of cover, topographical characteristics and soil properties. When runoff events are simple (with one or two runoff peaks), the modelled hydrographs reproduce the hydrographs observed reasonably well, but in complex events (with several runoff peaks) the adjustment is not as good. The model also shows the influence of the spatial distribution of soil surfaces on the overall runoff, aiding exploration of the spatial hydrological relationships among different landscape units. Copyright © 2002 John Wiley & Sons, Ltd.     

Effect of temporal resolution of water level and temperature inputs on numerical simulation of groundwater–surface water flux exchange in a heavily modified urban river

Groundwater interacts with surface water features nearly in all types of landscapes. Understanding these interactions has practical consequences on the quantity and quality of water in either system, because the depletion or contamination of one of the systems will eventually affect the other one. Many studies have shown that the use of heat as natural tracer in conjunction with water level measurements is an effective method for estimating water flow (fluxes) between groundwater and surface water. A number of studies have explored the effects of spatial and temporal variability of groundwater–surface water flux exchanges using temperature and water level measurements; however, the effect of temporal resolution of water level and temperature data on estimating flux remains unexplored. Therefore, this study investigated the effect of temporal resolution of input data on temporal variation of groundwater–surface water flux exchanges. To this end, we calibrated a variably saturated two‐dimensional groundwater flow and heat transport model (VS2DH) at hourly and daily time scales using temperatures measured at multiple depths below the riverbed of the Zenne River, located at a well‐known Belgian brownfield site. Results of the study showed that the computed water flux through the streambed ranged between ?32 mm/day and +25 mm/day using the hourly model and from ?10 mm/day to ?37 mm/day using the daily model. The hourly model resulted in detecting reversal of flow direction inducing short‐term surface water flow into the streambed. However, such events were not captured if daily temperature and water level measurements were used as input. These findings have important implications for understanding contaminant mass flux and their attenuation in the mixing zone of groundwater and surface water. Copyright © 2012 John Wiley & Sons, Ltd.     

Improvement of the Noah land surface model for warm season processes: evaluation of water and energy flux simulation

The Noah model is a land surface model of the National Centers for Environmental Prediction. It has been widely used in regional coupled weather and climate models (i.e. Weather Research and Forecasting Model, Eta Mesoscale Model) and global coupled weather and climate models (i.e. National Centers for Environmental Prediction Global Forecast System, Climate Forecast System). Therefore, its continued improvement and development are keys to enhancing our weather and climate forecast ability and water and energy flux simulation accuracy. North American Land Data Assimilation System phase 1 (NLDAS‐1) experiments indicated that the Noah model exhibited substantial bias in latent heat flux, total runoff and land skin temperature during the warm season, and such bias can significantly affect coupled weather and climate models. This paper presents a study to improve the Noah model by adding model parameterization processes such as including seasonal factor on leaf area index and root distribution and selecting optimal model parameters. We compared simulated latent heat flux, mean annual runoff and land skin temperature from the Noah control and test versions with measured latent heat flux, land surface skin temperature, mean annual runoff and satellite‐retrieved land surface skin temperature. The results show that the test version significantly reduces biases in latent heat, total runoff and land skin temperature simulation. The test version has been used for the NLDAS phase 2 (NLDAS‐2) to produce 30‐year water flux, energy flux and state variable products to support the US drought monitor of National Integrated Drought Information System. Copyright © 2012 John Wiley & Sons, Ltd.     

Improved simulation of river water and groundwater exchange in an alluvial plain using the SWAT model

Hydrological interaction between surface and subsurface water systems has a significant impact on water quality, ecosystems and biogeochemistry cycling of both systems. Distributed models have been developed to simulate this function, but they require detailed spatial inputs and extensive computation time. The soil and water assessment tool (SWAT) model is a semi‐distributed model that has been successfully applied around the world. However, it has not been able to simulate the two‐way exchanges between surface water and groundwater. In this study, the SWAT‐landscape unit (LU) model – based on a catena method that routes flow across three LUs (the divide, the hillslope and the valley) – was modified and applied in the floodplain of the Garonne River. The modified model was called SWAT‐LUD. Darcy's equation was applied to simulate groundwater flow. The algorithm for surface water‐level simulation during flooding periods was modified, and the influence of flooding on groundwater levels was added to the model. Chloride was chosen as a conservative tracer to test simulated water exchanges. The simulated water exchange quantity from SWAT‐LUD was compared with the output of a two‐dimensional distributed model, surface–subsurface water exchange model. The results showed that simulated groundwater levels in the LU adjoining the river matched the observed data very well. Additionally, SWAT‐LUD model was able to reflect the actual water exchange between the river and the aquifer. It showed that river water discharge has a significant influence on the surface–groundwater exchanges. The main water flow direction in the river/groundwater interface was from groundwater to river; water that flowed in this direction accounted for 65% of the total exchanged water volume. The water mixing occurs mainly during high hydraulic periods. Flooded water was important for the surface–subsurface water exchange process; it accounted for 69% of total water that flowed from the river to the aquifer. The new module also provides the option of simulating pollution transfer occurring at the river/groundwater interface at the catchment scale. Copyright © 2015 John Wiley & Sons, Ltd.     

Observed and simulated water and energy budget components at SCAN sites in the lower Mississippi Basin

Land surface models are typically constrained by one or a few observed variables, while assuming that the internal water and energy partitioning is sensitive to those observed variables and realistic enough to simulate unobserved variables. To verify these assumptions, in situ soil climate analysis network (SCAN) observations in the Lower Mississippi Basin (2002–2008) are analysed to quantify water and energy budget components and they are compared to Community Land Model (CLM3·5) simulations. The local soil texture is identified as a major indicator for water storage characteristics and the Normalized Difference Vegetation Index shows potential as a drought indicator in summer months. Both observations and simulations indicate a regime where, except in some summer months, evapotranspiration controls soil moisture. CLM simulations with different soil texture assignments show discharge sensitivity to soil moisture, but almost no impact on evapotranspiration and other energy balance components. The observed and simulated water budgets show a similar partitioning. However, the SCAN observed water balance does not close because of precipitation measurement errors, unobserved irrigation, lack of specific storage change measurements and errors in the computed actual evapotranspiration. The simulated heat flux partitioning differs from that ‘observed’, with a larger (resp. smaller) fraction of net radiation being used by latent (resp. sensible) heat flux, and unobserved freeze and thaw events. The comparison between observations and model simulations suggests that a consistent observation collection for multiple variables would be needed to constrain and improve the full set of land surface variable estimates. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of the universal and simplified soil model coupling heat and water transport

It is very important to develop a universal soil model with higher simplicity and more accuracy, which can be widely applied to very general cases such as wet or dry soil, frozen or unfrozen soil and homogeneous or heterogeneous soil. Firstly in this study, based on analysis of both magnitude order and the numerical simulation results, the universal and simplified soil model (USSM) coupling heat and mass transport processes is developed. Secondly, in order to avoid the greater uncertainty caused by the phase change term in numerical iteration process for the model solution obtaining, new version of the universal simplified soil model (NUSSM) is further derived through variables transformation, and accordingly a more efficient numerical scheme for the new version is designed well. The simulation results from the NUSSM agree with the results from more complicated and accurate soil model very well, also reasonably reproduce the observed data under widely real conditions. The new version model, because of its simplicity, will match for the development of land surface model.     

First‐order exchange coefficient coupling for simulating surface water–groundwater interactions: parameter sensitivity and consistency with a physics‐based approach

Distributed hydrologic models capable of simulating fully‐coupled surface water and groundwater flow are increasingly used to examine problems in the hydrologic sciences. Several techniques are currently available to couple the surface and subsurface; the two most frequently employed approaches are first‐order exchange coefficients (a.k.a., the surface conductance method) and enforced continuity of pressure and flux at the surface‐subsurface boundary condition. The effort reported here examines the parameter sensitivity of simulated hydrologic response for the first‐order exchange coefficients at a well‐characterized field site using the fully coupled Integrated Hydrology Model (InHM). This investigation demonstrates that the first‐order exchange coefficients can be selected such that the simulated hydrologic response is insensitive to the parameter choice, while simulation time is considerably reduced. Alternatively, the ability to choose a first‐order exchange coefficient that intentionally decouples the surface and subsurface facilitates concept‐development simulations to examine real‐world situations where the surface‐subsurface exchange is impaired. While the parameters comprising the first‐order exchange coefficient cannot be directly estimated or measured, the insensitivity of the simulated flow system to these parameters (when chosen appropriately) combined with the ability to mimic actual physical processes suggests that the first‐order exchange coefficient approach can be consistent with a physics‐based framework. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluating the potential of a blended passive microwave‐interactive multi‐sensor product for improved mapping of snow cover and estimations of snow water equivalent

The retrieval of Snow Water Equivalent (SWE) from remote sensing satellites continues to be a very challenging problem. In this paper, we evaluate the accuracy of a new SWE product derived from the blending of a passive microwave SWE product based on the Advanced Microwave Sounding Unit (AMSU) with a multi‐sensor snow cover extent product based on the Interactive Multi‐sensor Snow and Ice Mapping System (IMS). The microwave measurements have the ability to penetrate the snow pack, and thus, the retrieval of SWE is best accomplished using the AMSU. On the other hand, the IMS maps snow cover more reliably due to the use of multiple satellite and ground observations. The evolution of global snow cover from the blended, the AMSU and the IMS products was examined during the 2006 snow season. Despite the overall good inter‐product agreement, it was shown that the retrievals of snow cover extent in the blended product are improved when using IMS, with implications for improved microwave retrievals of SWE. In a separate investigation, the skill of the microwave SWE product was also examined for its ability to correctly estimate SWE globally and regionally. Qualitative evaluation of global SWE retrievals suggested dependence on land surface temperature: the lower the temperature, the higher the SWE retrieved. This temperature bias was attributed in part to temperature effects on those snow properties that impact microwave response. Therefore, algorithm modifications are needed with more dynamical adjustments to account for changing snow cover. Quantitative evaluation over Slovakia in central Europe, for a limited period in 2006, showed reasonably good performance for SWE less than 100 mm. Sensitivity to deeper snow decreased significantly. Copyright © 2007 John Wiley & Sons, Ltd.     

Sensitivity of streamflow simulation in the Delaware River Basin to forecasted land‐cover change for 2030 and 2060

In order to simulate the potential effect of forecasted land‐cover change on streamflow and water availability, there has to be confidence that the hydrologic model used is sensitive to small changes in land cover (<10%) and that this land‐cover change exceeds the inherent uncertainty in forecasted conditions. To investigate this, a 26‐year streamflow record was simulated for 33 basins (54–928 km²) in the Delaware River Basin using three dates of land cover: the 2011 National Land‐Cover Dataset (Homer, Fry, & Barnes, 2012 ), 2030 land‐cover conditions representing median values from 101 equally‐likely forecasts, and 2060 land‐cover conditions corresponding to the same iterations used to represent 2030. Streamflow was simulated using a process‐based hydrologic model that includes both pervious and impervious methods as parameterized by three land‐cover‐based hydrologic response units (HRUs)—forested, agricultural, and developed land. Small, but significant differences in streamflow magnitude, variability, and seasonality were seen among the three time periods—2011, 2030, and 2060. Temporal differences were discernible from the range of conditions simulated with 101 equally likely forecasts for 2030. Development was co‐located with the most frequent landscape components, as characterized by topographic wetness index, resulting in a change in hydrology for each HRU, highlighting that knowing the location of disturbance is key to understanding potential streamflow changes. These results show that streamflow simulation using regional calibration that incorporates land‐cover‐based HRUs can be sensitive to relatively small changes in land‐cover and that temporal trends resulting from land‐cover change can be isolated in order to evaluate other changes that might affect water resources.     

Assessment of surface water resources and evapotranspiration in the Haihe River basin of China using SWAT model

Quantitative assessment of surface water resources (SWRs) and evapotranspiration (ET) is essential and significant for reasonably planning and managing water resources in the Haihe River basin which is facing severe water shortage. In this study, a distributed hydrological model of the Haihe River basin was constructed using the Soil and Water Assessment Tool, well considering the reservoirs and agricultural management practices for reasonable simulation. The crop parameters were independently calibrated with the observed crop data at six experimental stations. Then, sensitivity ranks of hydrological parameters were analysed, which suggested the important parameters used for calibration. The model was successfully calibrated using the monthly observed data of discharge in around 1970–1991 and actual ET (ET_a) in 2002–2004 for the mountainous area and Haihe plain, respectively. Meanwhile, good agreements between the simulated and statistical crop yields in 1985–2005 further verified the model's appropriateness. Finally, the calibrated model was used to assess SWRs and ET_a in time and space during 1961–2005. Results showed that the average annual natural SWRs and the ET_a were about 17.5 billion cubic metre and 542 mm, respectively, both with a slight downward trend. The spatial distributions of both SWRs and ET_a were significantly impacted by variations of precipitation and land use. Moreover, the reservoir in operation was the main factor for the noticeable decline of actual SWRs. In the Haihe plain, the ET_a with irrigation was increased by 46% compared with that under rainfed conditions. In addition, this study identified the regions with potential to improve the irrigation effects on water use. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparison of stormflow responses of surface‐mined and forested watersheds in the Appalachian Mountains,USA

The results of a hydrological analysis that was conducted as part of a larger, multifaceted, collaborative effort to quantify ecosystem functions in watersheds subjected to land‐use and land‐cover change are presented. The primary goal of the study was to determine whether a small watershed in the Appalachian region (USA) that was recently subjected to surface mining and reclamation practices produces stormflow responses to rain events that are different from those produced by a nearby reference watershed covered by young, second‐growth forest. Water balances indicated that runoff yields did not vary significantly between the two watersheds on an annual basis. Statistically significant differences (p?0·05) in runoff responses were observed on an event basis, however, with the mined/reclaimed watershed producing, on average (a) higher storm runoff coefficients (2·5×), (b) greater total storm runoff (3×), and (c) higher peak hourly runoff rates (2×) when compared with the reference watershed. Results of a unit hydrograph analysis also showed, unexpectedly, that the modelled unit responses of the two watersheds to effective rainfall pulses were similar, despite the noted differences in land cover. Differences in stormflow responses were thus largely explained by dramatic reductions in cumulative rates of rainfall abstraction (measured using infiltrometers) attributable to soil compaction during land reclamation. Additional field hydrological measurements on other mined watersheds will be needed to generalize our results, as well as to understand and predict the cumulative hydrological impacts of widespread surface mining in larger watersheds and river basins. Copyright © 2006 John Wiley & Sons, Ltd.     

太湖小时尺度水面蒸发特征及3种模型模拟效果对比

小时尺度水面蒸发可影响水面大气边界层热力和动力结构,分析湖泊小时尺度水面蒸发主要影响因素,选取准确模拟其特征的蒸发模型,将有助于改善流域天气预报和空气质量预报.基于太湖避风港站2012—2013年通量、辐射和气象观测数据,分析太湖小时尺度水面蒸发主要影响因子和3个模型(传统质量传输模型、Granger and Hedstrom经验模型、DYRESM模型)的模拟效果.结果表明:影响太湖小时尺度水面蒸发的主要因子为水气界面水汽压差和风速的乘积,而非净辐射.传统质量传输模型、Granger and Hedstrom经验模型、DYRESM模型模拟值与全年实测值的一致性系数分别为0.92、0.87和0.89,均方根误差分别为28.35、41.58和38.26 W/m~2.传统质量传输模型对太湖小时尺度水面蒸发的日变化和季节动态模拟效果最佳,其夜间模拟相对误差小于3%,除秋季外,其他季节的模拟绝对误差均小于4 W/m~2.Granger and Hedstrom经验模型系统性地高估太湖潜热通量,在大气较为稳定的午后(高估22~32 W/m~2)和冬季(高估72%)高估最为明显,模拟效果最差.DYRESM模型也系统地高估太湖潜热通量,模拟效果居中.考虑水汽交换系数随风速的变化特征将有助于改善传统质量传输模型和DYRESM模型对太湖小时尺度水面蒸发的模拟精度.