The 1984 Abruzzo earthquake (Italy): an example of seismogenic process controlled by interaction between differently oriented synkinematic faults

The evolution of the seismogenic process associated with the M_s 5.8 Sangro Valley earthquake of May 1984 (Abruzzo, central Italy) is closely controlled by the Quaternary extensional tectonic pattern of the area. This pattern is characterised by normal faults mainly NNW striking, whose length is controlled by pre-existing Mio–Pliocene N100±10° left-lateral strike-slip fault zones. These are partly re-activated as right-lateral normal-oblique faults under the Quaternary extensional regime and behave as transfer faults.Integration of re-located aftershocks, focal mechanisms and structural features are used to explain the divergence between the alignment of aftershocks (WSW–ENE) and the direction of seismogenic fault planes defined by the focal mechanisms (NNW–SSE) of the main shock and of the largest aftershock (M_s=5.3).The faults that appear to be involved in the seismogenic process are the NNW–SSE Barrea fault and the E–W M. Greco fault. There is field evidence of finite Quaternary deformation indicating that the normal Barrea fault re-activates the M. Greco fault as right-lateral transfer fault. No surface faulting was observed during the seismic sequence. The apparently incongruent divergence between aftershocks and nodal planes may be explained by interpreting the M. Greco fault as a barrier to the propagation of earthquake rupturing. The rupture would have nucleated on the Barrea fault, migrating along-strike towards NNW. The sharp variation in direction from the Barrea to the M. Greco fault segments would have represented a structural complexity sufficient to halt the rupture and subsequent concentration of post-seismic deformation as aftershocks around the line of intersection between the two fault planes.Fault complexities, similar to those observed in the Sangro Valley, are common features of the seismic zone of the Apennines. We suggest that the zones of interaction between NW–SE and NNW–SSE Plio-Quaternary faults and nearly E–W transfer faults, extending for several kilometres in the same way as M. Greco does, might act as barriers to the along-strike propagation of rupture processes during normal faulting earthquakes. This might have strong implications on seismic hazard, especially for the extent of the maximum magnitude expected on active faults during single rupture episodes.     

Mesozoic transtensional basin history of the Eastern Cordillera, Colombian Andes: Inferences from tectonic models

Backstripping analysis and forward modeling of 162 stratigraphic columns and wells of the Eastern Cordillera (EC), Llanos, and Magdalena Valley shows the Mesozoic Colombian Basin is marked by five lithosphere stretching pulses. Three stretching events are suggested during the Triassic–Jurassic, but additional biostratigraphical data are needed to identify them precisely. The spatial distribution of lithosphere stretching values suggests that small, narrow (<150 km), asymmetric graben basins were located on opposite sides of the paleo-Magdalena–La Salina fault system, which probably was active as a master transtensional or strike-slip fault system. Paleomagnetic data suggesting a significant (at least 10°) northward translation of terranes west of the Bucaramanga fault during the Early Jurassic, and the similarity between the early Mesozoic stratigraphy and tectonic setting of the Payandé terrane with the Late Permian transtensional rift of the Eastern Cordillera of Peru and Bolivia indicate that the areas were adjacent in early Mesozoic times. New geochronological, petrological, stratigraphic, and structural research is necessary to test this hypothesis, including additional paleomagnetic investigations to determine the paleolatitudinal position of the Central Cordillera and adjacent tectonic terranes during the Triassic–Jurassic. Two stretching events are suggested for the Cretaceous: Berriasian–Hauterivian (144–127 Ma) and Aptian–Albian (121–102 Ma). During the Early Cretaceous, marine facies accumulated on an extensional basin system. Shallow-marine sedimentation ended at the end of the Cretaceous due to the accretion of oceanic terranes of the Western Cordillera. In Berriasian–Hauterivian subsidence curves, isopach maps and paleomagnetic data imply a (>180 km) wide, asymmetrical, transtensional half-rift basin existed, divided by the Santander Floresta horst or high. The location of small mafic intrusions coincides with areas of thin crust (crustal stretching factors >1.4) and maximum stretching of the subcrustal lithosphere. During the Aptian–early Albian, the basin extended toward the south in the Upper Magdalena Valley. Differences between crustal and subcrustal stretching values suggest some lowermost crustal decoupling between the crust and subcrustal lithosphere or that increased thermal thinning affected the mantle lithosphere. Late Cretaceous subsidence was mainly driven by lithospheric cooling, water loading, and horizontal compressional stresses generated by collision of oceanic terranes in western Colombia. Triassic transtensional basins were narrow and increased in width during the Triassic and Jurassic. Cretaceous transtensional basins were wider than Triassic–Jurassic basins. During the Mesozoic, the strike-slip component gradually decreased at the expense of the increase of the extensional component, as suggested by paleomagnetic data and lithosphere stretching values. During the Berriasian–Hauterivian, the eastern side of the extensional basin may have developed by reactivation of an older Paleozoic rift system associated with the Guaicáramo fault system. The western side probably developed through reactivation of an earlier normal fault system developed during Triassic–Jurassic transtension. Alternatively, the eastern and western margins of the graben may have developed along older strike-slip faults, which were the boundaries of the accretion of terranes west of the Guaicáramo fault during the Late Triassic and Jurassic. The increasing width of the graben system likely was the result of progressive tensional reactivation of preexisting upper crustal weakness zones. Lateral changes in Mesozoic sediment thickness suggest the reverse or thrust faults that now define the eastern and western borders of the EC were originally normal faults with a strike-slip component that inverted during the Cenozoic Andean orogeny. Thus, the Guaicáramo, La Salina, Bitúima, Magdalena, and Boyacá originally were transtensional faults. Their oblique orientation relative to the Mesozoic magmatic arc of the Central Cordillera may be the result of oblique slip extension during the Cretaceous or inherited from the pre-Mesozoic structural grains. However, not all Mesozoic transtensional faults were inverted.     

The Role of Pre-existing Structures in the Origin, Propagation and Architecture of Faults in the Main Ethiopian Rift

Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).     

The February 11, 2004 Dead Sea earthquake ML = 5.2 in Jordan and its tectonic implication

A moderate-sized (M_w  5.3) earthquake occurred in the Dead Sea basin on February 11, 2004. A rigorous seismological analysis of the main shock and numerous aftershocks suggests that seismogenic structure was a secondary, antithetic fault within the Dead Sea fault system. The main shock is well located using all available regional seismic stations, and 43 aftershocks were precisely located relative to the main shock using a double difference algorithm. The first motion, focal mechanism for this earthquake demonstrates NNW–SSE and ENE–WSW striking nodal planes, and the aftershocks distribution is consistent with the latter — indicating a right-lateral sense of displacement. This orientation and sense of shear are consistent with similarly oriented geological faults around the Dead Sea basin — these structures are likely antithetic faults within the transform system. Although moderate in size, earthquakes that occur very close to the large Dead Sea fault system warrant consideration in the earthquake hazard assessment of the region: For example, owing to the proximity to the main fault, moderate earthquakes such as this may produce static changes in Coulomb stress along the main fault.     

Salt redistribution during extension and inversion inferred from 3D backstripping

A 3D backstripping approach considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step is used to reconstruct the subsidence history in the Northeast German Basin. The method allows to determine basin subsidence and the salt-related deformation during Late Cretaceous–Early Cenozoic inversion and during Late Triassic–Jurassic extension. In the Northeast German Basin, the deformation is thin-skinned in the basinal part, but thick-skinned at the basin margins. The salt cover is deformed due to Late Triassic–Jurassic extension and Late Cretaceous–Early Cenozoic inversion whereas the salt basement remained largely stable in the basin area. In contrast, the basin margins suffered strong deformation especially during Late Cretaceous–Early Cenozoic inversion. As a main question, we address the role of salt during the thin-skinned extension and inversion of the basin. In our modelling approach, we assume that the salt behaves like a viscous fluid on the geological time-scale, that salt and overburden are in hydrostatical near-equilibrium at all times, and that the volume of salt is constant. Because the basement of the salt is not deformed due to decoupling in the basin area, we consider the base of the salt as a reference surface, where the load pressure must be equilibrated. Our results indicate that major salt movements took place during Late Triassic to Jurassic E–W directed extension and during Late Cretaceous–Early Cenozoic NNE–SSW directed compression. Moreover, the study outcome suggests that horizontal strain propagation in the salt cover could have triggered passive salt movements which balanced the cover deformation by viscous flow. In the Late Triassic, strain transfer from the large graben systems in West Central Europe to the east could have caused the subsidence of the Rheinsberg Trough above the salt layer. In this context, the effective regional stress did not exceed the yield strength of the basement below the Rheinsberg Trough, but was high enough to provoke deformation of the viscous salt layer and its cover. During the Late Cretaceous–Early Cenozoic phase of inversion, horizontal strain propagation from the southern basin margin into the basin can explain the intensive thin-skinned compressive deformation of the salt cover in the basin. The thick-skinned compressive deformation along the southern basin margin may have propagated into the salt cover of the basin where the resulting folding again was balanced by viscous salt flow into the anticlines of folds. The huge vertical offset of the pre-Zechstein basement along the southern basin margin and the amount of shortening in the folded salt cover of the basin indicate that the tectonic forces responsible for this inversion event have been of a considerable magnitude.     

Active faults, seismicity and stresses in an internal boundary of a tectonic arc (Campo de Dalías and Níjar, southeastern Betic Cordilleras, Spain)

The Betic-Rif Cordilleras, formed by the interaction of NW–SE convergence between the Eurasian and African plates and the westward motion of their Internal Zones, provide a good example of an active tectonic arc. The Campo de Dalías and Campo de Níjar constitute outcropping sectors of Neogene and Quaternary rocks located in the southeastern border of the Betic Cordilleras and allow us to study the recent deformations developed in the internal border of this tectonic arc.The main active faults with related seismicity, representing a moderate seismic hazard, associated to the southeastern Betic Cordilleras boundary, include high-angle NW–SE-oriented normal faults that affect, at least, the upper part of the crust, a main detachment located at 10 km depth, and probably another detachment at 20 km as well. Seismite structures, recent fault scarps with associated colluvial wedges that deform the drainage network and the alignment of the coastline, indicate that the high-angle faults have been active at least since the Quaternary.Paleostresses determined from microfault analysis in Quaternary deposits generally show an ENE–WSW trend of extension. Present-day earthquake focal mechanisms include normal, strike-slip and reverse faulting. Normal and strike-slip focal mechanisms generally indicate ENE–WSW extension, and strike-slip and reverse focal mechanisms are related to NNW–SSE compression.The maximum horizontal compression has a consistently NNW–SSE trend. The deep activity of detachments and reverse faults determines the NNW–SSE crustal shortening related to the Eurasian–African plate convergence. At surface, however, the predominance of normal faults is probably produced by the increase in the relative weight of the vertical stress axis, which in turn may be related to relief uplift and subsequent horizontal spreading. The internal mountain front boundary of the Betic Cordilleras developed through the activity of a set of structures that is more complex than a typical external mountain front, probably as a consequence of a vertical variable stress field that acted on previously deformed rocks belonging to the Internal Zone of the cordilleras.     

Fossil fuel energy resources of Ethiopia: Coal deposits

The gravity of Ethiopian energy problem has initiated studies to explore various energy resources in Ethiopia, one among this is the exploration for coal resources. Studies confirmed the presence of coal deposits in the country. The coal-bearing sediments are distributed in the Inter-Trappean and Pre-Trap volcanic geological settings, and deposited in fluvio-lacustrine and paludal environments in grabens and half-grabens formed by a NNE–SSW and NNW–SSE fault systems. Most significant coal deposits are found in the Inter-Trappean geological setting. The coal and coal-bearing sediments reach a maximum thickness of 4 m and 300 m, respectively. The best coal deposits were hosted in sandstone–coal–shale and mudstone–coal–shale facies. The coal formations of Ethiopia are quite unique in that they are neither comparable to the coal measures of the Permo-Carboniferous Karroo Formation nor to the Late Devonian–Carboniferous of North America or Northwestern Europe. Proximate analysis and calorific value data indicated that the Ethiopian coals fall under lignite to high volatile bituminous coal, and genetically are classified under humic, sapropelic and mixed coal. Vitrinite reflectance studies confirmed 0.3–0.64% Ro values for the studied coals. Palynology studies confirmed that the Ethiopian coal-bearing sediments range in age from Eocene to Miocene. A total of about 297 Mt of coal reserve registered in the country. The coal reserve of the country can be considered as an important alternative source of energy.     

Paleostress analysis of the Cretaceous rocks in the eastern margin of the Dead Sea transform, Jordan

This paper presents the first paleostress results from fault-slip data on Cretaceous limestone at the eastern rim of the Dead Sea transform (DST) in Jordan. Stress inversion of fault-slip data is performed using an improved right dieder method, followed by rotational optimization (Delvaux, TENSOR Program). The orientation of the principal stress axes (σ₁, σ₂ and σ₃) and the ratio of the principal stress differences ( ) show two main paleostress fields marking two main stress regimes, strike-slip and extensional. The first is characterized by NNW–SSE compression and ENE–WSW extension and related to Middle Miocene-Recent sinistral movement along the Dead Sea transform and the opening of the Red Sea. The second paleostress field is a WNW–ESE compression and NNE–SSW extension restricted to the northern part of the investigated area. This stress field could be associated with the development of the Syrian Arc fold belt which started during the Turonian, or it may be due to an anticlockwise rotation of the first stress field.     

Large-scale distributed deformation controlled topography along the western Africa–Eurasia limit: Tectonic constraints

In the interior of the Iberian Peninsula, the main geomorphic features, mountain ranges and basins, seems to be arranged in several directions whose origin can be related to the N–S plate convergence which occurred along the Cantabro–Pyrenean border during the Eocene–Lower Miocene time span. The Iberian Variscan basement accommodated part of this plate convergence in three E–W trending crustal folds as well as in the reactivation of two left-lateral NNE–SSW strike-slip belts. The rest of the convergence was assumed through the inversion of the Iberian Mesozoic Rift to form the Iberian Chain. This inversion gave rise to a process of oblique crustal shortening involving the development of two right lateral NW–SE shear zones. Crustal folds, strike-slip corridors and one inverted rift compose a tectonic mechanism of pure shear in which the shortening is solved vertically by the development of mountain ranges and related sedimentary basins. This model can be expanded to NW Africa, up to the Atlasic System, where N–S plate convergence seems also to be accommodated in several basement uplifts, Anti-Atlas and Meseta, and through the inversion of two Mesozoic rifts, High and Middle Atlas. In this tectonic situation, the microcontinent Iberia used to be firmly attached to Africa during most part of the Tertiary, in such a way that N–S compressive stresses could be transmitted from the collision of the Pyrenean boundary. This tectonic scenario implies that most part of the Tertiary Eurasia–Africa convergence was not accommodated along the Iberia–Africa interface, but in the Pyrenean plateboundary. A broad zone of distributed deformation resulted from the transmission of compressive stresses from the collision at the Pyrenean border. This distributed, intraplate deformation, can be easily related to the topographic pattern of the Africa–Eurasia interface at the longitude of the Iberian Peninsula.Shortening in the Rif–Betics external zones – and their related topographic features – must be conversely related to more “local” driven mechanisms, the westward displacement of the “exotic” Alboran domain, other than N–S convergence. The remaining NNW–SSE to NW–SE, latest Miocene up to Present convergence is also being accommodated in this zone straddling Iberia and Morocco, at the same time as a new ill-defined plate boundary that is being developed between Europe and Africa.     

Magnetic fabric study of the SE Rhenohercynian Zone (Bohemian Massif): Implications for dynamics of the Paleozoic accretionary wedge

The progressive deformation recorded in the magnetic fabric of sedimentary rocks was studied in the SE Rhenohercynian Zone (RHZ), eastern margin of the Bohemian Massif, Czech Republic. Almost 800 oriented samples of the Lower Carboniferous mudstones and graywackes were collected from the SSE part of the Czech RHZ, so-called the Drahany Upland. The anisotropy of magnetic susceptibility (AMS) is predominantly controlled by the preferred orientation of paramagnetic phyllosilicates, mainly iron-bearing chlorites. A regional distribution of the magnetic fabric within the Drahany Upland revealed an increasing deformation from the SSE to the NNW. In the SE, the magnetic fabric is bedding-parallel with magnetic lineation scattered in the bedding plane or trending N–S to NNE–SSW. Further to the NW, the magnetic foliation rotates from the bedding-parallel orientation to the orientation parallel to the evolving cleavage. This rotation is accompanied by a decrease of the anisotropy degree and the prolate nature of the anisotropy ellipsoids. The magnetic lineation is parallel to the strike of the bedding, bedding/cleavage intersection, pencil structure or the fold axes on a regional scale. In the NW part of the Drahany Upland, the magnetic foliation becomes parallel to the cleavage accompanied by an increase of the anisotropy degree and the oblate nature of the anisotropy ellipsoids. The increasing trend of deformation corresponds to the SSE–NNW increase in the degree of anchimetamorphism; both trends being oblique to the main lithostratigraphic formations as typically observed in the sedimentary rocks of the accretionary wedges. The SSE–NNW increase in deformation and anchimetamorphism continues to the Nízký Jeseník Mts., representing the northern part of the same accretionary wedge. The kinematics of deformation could not be unambiguously assessed. The observed magnetic fabric may reflect either lateral shortening or horizontal simple shear or a combination of both mechanisms. Regarding the subduction process, it seems that the sedimentary sequences of the Drahany Upland were subducted, partly offscraped and accreted frontally or partly underplated as opposed to the Nízký Jeseník Mts. where some return flow must have occurred.     

Internal structure of a collapsed terrain: The Lújar syncline and its significance for the fold- and sheet-structure of the Alborán Domain (Betic Cordilleras, Spain)

Detailed structural analysis of the Sierra de Lújar in the western Alpujarras region (Betic Cordilleras, S Spain), a very representative area of the terrain known as the Alborán Domain, has revealed the existence of a very large N-vergent recumbent syncline which involves the whole mountain massif and neighbouring areas. The Lújar syncline and, probably, the associated recumbent anticline which crops out southeast of Sierra de Lújar show a great variation in the orientation of the hinge line. Although having a curved shape, the hinge line is contained in a plane whose attitude coincides with the main attitude of the axial-plane crenulation foliation (Sc), suggesting that it is a sheath fold.The strongly deformed overturned limb of the syncline is cut by two low-angle normal faults displacing towards the north. Similarity in the kinematics between the faults and the fold, and the association between the faults and the high-strain zone in the overturned limb of the fold, suggest that they are related. Regional constraints on the age of the crenulation cleavage and the low-angle normal faults indicate that they formed during the early Miocene late-orogenic extensional event in the Alborán Domain.We propose an alternate explanation for the structure of the Alpujarras region in which the Lújar syncline forms part of a recumbent syncline–anticline pair that extends along much of the Alpujarride outcrop in the southern Betic Cordillera. In several places, the fold is disrupted by low-angle normal faults, and it is overlain by an upper Alpujárride extensional sheet mainly composed of medium- to high-grade metamorphic rocks. We suggest that all these structures arose from the extensional deformation under decreasing temperature conditions of a previously thickened and metamorphosed orogenic crust.     

A new case of reservoir triggered seismicity: Govind Ballav Pant reservoir (Rihand dam), central India

We report here that seismicity near Govind Ballav Pant reservoir is strongly influenced by the reservoir operations. It is the second largest reservoir in India, which is built on Rihand river in the failed rift region of central India. Most of the earthquakes occurred during the high water stand in the reservoir with a time lag of about 1 month. We use the concept of coulomb stress change and use Green's function based approach to estimate stresses and pore pressure due to the reservoir load. We find that the reservoir increases coulomb stress on the nearby faults of the region that are favourably oriented for failure in predominantly reverse slip manner under the NNE–SSW compression and thus promotes failure. The above two factors make it an obvious, yet so far unreported case of reservoir triggered seismicity.     

Himalayan transverse faults and folds and their parallelism with subsurface structures of North Indian plains

A large number of fractures, faults and folds trending normal and oblique to the Himalayan tectonic trend have been recognized in recent years. The tear faults of Kumaun and Nepal have caused predominant right-lateral shear movements. There are eloquent indications of tectonic and seismic activities along some of these faults. In Kumaun, some of the NNW—SSE oriented tear faults coincide with the great thrusts that have brought older Precambrian crystallines over the sedimentary rock. This phenomenon has led many workers to interpret the thrusts as high-angled faults. Significantly, these transverse and oblique faults and fractures are parallel to the great faults discovered in the basement of the Ganga Basin and in the South Indian block, implying a certain genetic connection between the two sets.Likewise, the transverse folds of mesoscopic and macroscopic dimensions superposed on earlier folds of normal Himalayan trend are parallel to the great hidden ridges in the base ment of the Ganga Basin, representing undersurface extension of the Peninsular orogenic trends such as the Satpura, Bundelkhand and Aravali.The presence in the Lesser Himalaya of transverse structures having striking parallelism with those of Peninsular India, coupled with the strong lithostratigraphic similarities between the Purana (Riphean) sedimentary formations of the Lesser Himalaya and the greater Vindhyan Basin and the occurrence in many parts of the Himalaya of coalbearing continental Gondwana and marine Permian formations, reminiscent of similar horizons of the Bihar-Madhya Pradesh borders, is a pointer to the tectonic unity of the two provinces and suggests involvement of Peninsular India in the tectonic framework of the Himalaya.     

Source parameters of March 10 and September 13, 2007, United Arab Emirates earthquakes

On March 10 and September 13, 2007 two earthquakes with moment magnitudes 3.66 and 3.94, respectively, occurred in the eastern part of the United Arab Emirates (UAE). The two events were widely felt in the northern Emirates and Oman and were accompanied by a few aftershocks. Ground motions from these events were well recorded by the broadband stations of Dubai (UAE) and Oman seismological networks and provide an excellent opportunity to study the tectonic process and present day stress field acting in this area. In this study, we report the focal mechanisms of the two main shocks by two methods: first motion polarities and regional waveform moment tensor inversion. Our results indicate nearly pure normal faulting mechanisms with a slight strike slip component. We associated the fault plane trending NNE–SSW with a suggested fault along the extension of the faults bounded Bani Hamid area. The seismicity distribution between two earthquake sequences reveals a noticeable gap that may be a site of a future event. The source parameters (seismic moment, moment magnitude, fault radius, stress drop and displacement across the fault) were also estimated from displacement spectra. The moment magnitudes were very consistent with waveform inversion. The recent deployment of seismic networks in Dubai and Oman reveals tectonic activity in the northern Oman Mountains that was previously unknown. Continued observation and analysis will allow for characterization of seismicity and assessment of seismic hazard in the region.     

Late Permian–Middle Jurassic lithospheric thinning in Peru and Bolivia, and its bearing on Andean-age tectonics

Integrated studies and revisions of sedimentary basins and associated magmatism in Peru and Bolivia (8–22°S) show that this part of western Gondwana underwent rifting during the Late Permian–Middle Jurassic interval. Rifting started in central Peru in the Late Permian and propagated southwards into Bolivia until the Liassic/Dogger, along an axis that coincides with the present Eastern Cordillera. Southwest of this region, lithospheric thinning developed in the Early Jurassic and culminated in the Middle Jurassic, producing considerable subsidence in the Arequipa basin of southern Peru. This 110-Ma-long interval of lithospheric thinning ended 160 Ma with the onset of Malm–earliest Cretaceous partial rift inversion in the Eastern Cordillera area.The lithospheric heterogeneities inherited from these processes are likely to have largely influenced the distribution and features of younger compressional and/or transpressional deformations. In particular, the Altiplano plateau corresponds to a paleotectonic domain of “normal” lithospheric thickness that was bounded by two elongated areas underlain by thinned lithosphere. The high Eastern Cordillera of Peru and Bolivia results from Late Oligocene–Neogene intense inversion of the easternmost thinned area.     

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.     

Geometry and kinematics of the Andean thick-skinned thrust systems: Insights from the Chilean Frontal Cordillera (28°–28.5°S), Central Andes

The structure of the Chilean Frontal Cordillera, located over the Central Andes flat-slab subduction segment (27°–28.5°S), is characterized by a thick-skinned deformation, affecting both the pre-rift basement and the Mesozoic and Cenozoic infill of the NNE-SSW Lautaro and Lagunillas Basins, which were developed during the Pangea-Gondwana break-up. The compressive deformation show a complex interaction between Mesozoic rift structures and thrust systems, affecting a suite of Permo-Triassic (258–245 Ma) granitic blocks. We used a combination of geological mapping, new structural data, balanced and restored cross sections and geochronological data to investigate the geometry and kinematics of the Andean thick-skinned thrust systems of the region. The thrust systems include double-vergent thick-skinned thrust faults, basement-cored anticlines and minor thin-skinned thrusts and folds. The presence of Triassic and Jurassic syn-rift successions along the hanging wall and footwall of the basement thrust faults are keys to suggest that the current structural framework of the region should be associated with the shortening of previous Mesozoic half grabens. Based on this interpretation, we propose a deformation mechanism characterized by the tectonic inversion of rift-related faults and the propagation of basement ramps that fold and cut both, the early normal faults and the basement highs. New U–Pb ages obtained from synorogenic deposits (Quebrada Seca and Doña Ana formations) indicate at least three important compressive pulses. A first pulse at ∼80 Ma (Late Cretaceous), a second pulse related to the K-T phase of Andean deformation and, finally, a third pulse that occurred during the lower Miocene.     

Spatial variations in the similarity of earthquake populations: The case of the 1997 Colfiorito–Sellano (northern Apennines, Italy) seismic sequence

The spatial properties of events in the 1997 Colfiorito–Sellano seismic sequence (Northern Apennines, Italy) were investigated using coherence, a parameter derived from seismic moment tensors that quantifies the kinematic similarity between focal mechanisms. The 1997 Colfiorito–Sellano seismic sequence predominantly consists of normal faulting earthquakes, with a few strike-slip and reverse faulting episodes. This kinematic heterogeneity is possibly related to the contemporaneous activity of two different sets of faults: NW–SE normal faults and NNE–SSW sub-vertical faults, the latter inherited from the previous Miocene compressional phase. The study used two independently-derived data sets of the same seismic sequence characterized by a different number of events and by different precision of spatial localisation. Their statistical significances, assessed through a reshuffling procedure, reveal that data sets with at least some hundreds of events and good positional precision are required to obtain significant results through coherence analysis. Results from the better quality data set indicate that this seismic sequence is characterized by a rapid decrease in the kinematic similarity between earthquake pairs within 2 km of separation, particularly along directions sub-perpendicular to the normal fault strike. The decrease rate seems to be controlled by the geometric characteristics of the normal faults, given that the mean along-dip distance between fault segments is 2 km. In proximity to pre-existing tectonic lineaments the relative abundance of strike-slip and reverse faults tends to decrease the kinematic similarity between events but does not influence the coherence decrease rate. The presence of mixed focal mechanisms (normal, reverse and strike-slip) in a single seismic phase implies that mixed fault types are not restricted to polyphase tectonic histories: such heterogeneous kinematics during a single phase may be induced by the presence of inherited discontinuities.     

Basin inversion by distributed deformation: the southern margin of the Bristol Channel Basin, England

Several models of basin inversion described in the literature are tested in a study of Triassic and Early Jurassic strata exposed along the southern margin of the Bristol Channel Basin in Somerset, England that has been exhumed by <3 km. Two key features of the superbly exposed normal faults are that they formed at several times during basin evolution—not during Triassic to Early Jurassic growth, but during Late Jurassic rifting, and during and after inversion; and that >95% of them are still in net extension, despite widespread kinematic evidence for reverse reactivation. When coupled with the general absence of thin-skinned thrusts and the widespread occurrence of regional contractional folds, it appears that none of three main inversion models—the fault-reactivation model, the thin-skinned model and the buttress model—are by themselves applicable. We erect a new model of basin inversion, the distributed deformation model, which consists of three stages of basin inversion. Stage one involved early partial reactivation of large-displacement steep normal faults. Stage two was dominated by folding, wherein fault blocks underwent oblique (non-coaxial) shortening by map scale folding, accompanied by formation of outer arc normal faults, minor cleavage and neoformed thrusts. Stage three involved reverse reactivation of outer arc normal faults and activation of oblique and strike-slip faults that partitioned deformation into compartments.