Identification of structural parameters of multistorey shear buildings from modal data

A procedure has been presented in this paper to identify the structural parameters, viz. mass and stiffness matrices, from modal test data for multistorey shear buildings. The first two orders of modal data have been used by other researchers to estimate the global matrices where they depend only on measurable points which are less than the total number of structural degrees of freedom. The above method has been refined here by using Holzer criteria along with other numerical methods to estimate the global mass and stiffness matrices of the structure. This shows the methodology to be more efficient and accurate. The reliability of the procedure has been shown by examples of multistorey buildings. Copyright © 2004 John Wiley & Sons, Ltd.     

Dynamic responses of two buildings connected by viscoelastic dampers under bidirectional earthquake excitations

In this study,dynamic responses of two buildings connected by viscoelastic dampers under bidirectional excitations are extensively investigated.The two buildings are a 10-story building and a 16-story building,with the shorter building on the left.Viscoelastic dampers are installed at all fl oors of the shorter building.Equations of motion are formulated using a fractional derivative model to represent the viscoelastic dampers.Three cases are considered with mass eccentricities at 0,10% and-10% with respect to the dimensions of the buildings.The responses of the buildings are numerically predicted at different damper properties.The simulation results indicated that the maximum horizontal responses of the buildings without eccentricities are signifi cantly mitigated.However,torsional effects are adversely increased.For asymmetric buildings,the effectiveness of the connecting dampers is affected by building eccentricities.As a result,mass eccentricities must be taken into account in damper selection.When compared with vibrations induced by unidirectional excitations,bidirectional excitations can increase the responses of coupled asymmetric buildings.In addition,installing dampers only at the top fl oor of the shorter building may cause a sudden change in lateral stiffness of the taller building.Consequently,the story shear envelopes of the taller building are changed.     

Identification of modal parameters of non‐classically damped linear structures under multi‐component earthquake loading

A method for parametric system identification of classically damped linear system in frequency domain is adopted and extended for non‐classically damped linear systems subjected up to six components of earthquake ground motions. This method is able to work in multi‐input/multi‐output (MIMO) case. The response of a two‐degree‐of‐freedom model with non‐classical damping, excited by one‐component earthquake ground motion, is simulated and used to verify the proposed system identification method in the single‐input/multi‐output case. Also, the records of a 10 storey real building during the Northridge earthquake is used to verify the proposed system identification method in the MIMO case. In this case, at first, a single‐input/multi‐output assumption is considered for the system and modal parameters are identified, then other components of earthquake ground motions are added, respectively, and the modal parameters are identified again. This procedure is repeated until all four components of earthquake ground motions which are measured at the base level of the building are included in the identification process. The results of identification of real building show that consideration of non‐classical damping and inclusion of the multi‐components effect of earthquake ground motions can improve the least‐squares match between the finite Fourier transforms of recorded and calculated acceleration responses. Copyright © 2006 John Wiley & Sons, Ltd.     

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.     

Amplitude dependence of equivalent modal parameters in monitored buildings during earthquake swarms

This paper investigates the dynamic response of three sample buildings belonging to the Seismic Observatory for Structures, the Italian network for the permanent seismic monitoring of strategic structures, managed by the Italian Department of Civil Protection. The case studies cover different building types that could loosely represent the Italian building stock, with a special emphasis on cultural heritage and masonry structures. Observed under a low‐intensity seismic swarm comprising about 30 aftershocks after a main event, the three buildings are analysed through an input–output, model‐driven linear dynamic identification procedure, depicting the relation between the shaking level at the site and the variation of the equivalent structural modal parameters, while keeping into account the effects of soil–structure interaction. Finite element models will be used to investigate one of the case studies and to compare the law of variation of the structural modal parameters with respect to simplified models proposed by technical standards. Copyright © 2017 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

多层隔震结构的竖向地震作用研究

国外对隔震结构竖向地震反应的观测结果和对隔震结构竖向地震作用计算的规定,都与我国抗震规范有较大差别。本文通过反应谱和时程分析,讨论了多层隔震结构的竖向地震作用取值及竖向地震作用效应,对我国抗震规范的有关规定作了探讨,认为除位于近断层附近的隔震建筑外,其它隔震结构的竖向地震作用可取与不隔震结构相同;对于多层隔震建筑,多遇地震下可不考虑竖向地震作用,在罕遇地震下,应对所有隔震结构验算支座是否受拉或失稳,并且组合时应计入竖向地震作用效应。     

基于有限测点模态信息的结构物理参数识别

研究了测试信息不完备情况下的结构参数识别问题,针对稀疏模态的结构系统,提出了基于有限测点模态信息的优化识别算法。该算法通过有限测点上的模态参数构造关于结构物理参数的目标函数,然后采用遗传算法进行参数识别。最后一数值算例说明了该算法的可行性。     

基础隔震结构随机地震响应分析的复模态法

本文对多自由度基础隔震结构的随机地震响应问题进行了系统研究，首先建立了运动方程，然后用第一振型将上部结构展开，针对所得方程为非经典阻尼、非对称质量和非对称刚度情况，用复模态法解耦，获得了以第一振型表示的结构地震响应的解析解，对单自由度体系，此解即为结构响应的精确解，从而建立了两自由度体系在任意非经典阻尼与非对称质量和刚度情况下随机地震响应解析解分析的一般方法。本文方法也可用于带TMD减震结构、无损伤“加层减震”加固结构的随机地震响应分析与优化设计。     

A refined Frequency Domain Decomposition tool for structural modal monitoring in earthquake engineering

Output-only structural identification is developed by a refined Frequency Domain Decomposition(rFDD) approach, towards assessing current modal properties of heavy-damped buildings(in terms of identification challenge), under strong ground motions. Structural responses from earthquake excitations are taken as input signals for the identification algorithm. A new dedicated computational procedure, based on coupled Chebyshev Type Ⅱ bandpass filters, is outlined for the effective estimation of natural frequencies, mode shapes and modal damping ratios. The identification technique is also coupled with a Gabor Wavelet Transform, resulting in an effective and self-contained time-frequency analysis framework. Simulated response signals generated by shear-type frames(with variable structural features) are used as a necessary validation condition. In this context use is made of a complete set of seismic records taken from the FEMA P695 database, i.e. all 44 "Far-Field"(22 NS, 22 WE) earthquake signals. The modal estimates are statistically compared to their target values, proving the accuracy of the developed algorithm in providing prompt and accurate estimates of all current strong ground motion modal parameters. At this stage, such analysis tool may be employed for convenient application in the realm of Earthquake Engineering, towards potential Structural Health Monitoring and damage detection purposes.     

建筑结构地震反应观测系统

建筑结构上获取的地震反应记录有助于促进建筑抗震设计规范的改进,从而减轻地震引起的生命财产损失．本文对建筑结构地震反应观测系统布设的目的进行了简要论述,并就观测系统的构成及测点布设原则作了详细介绍．此外,以防灾楼结构地震反应观测系统作为典型实例进行了介绍．     

Frequency domain modal analysis of earthquake input energy to highly damped passive control structures

A new complex modal analysis‐based method is developed in the frequency domain for efficient computation of the earthquake input energy to a highly damped linear elastic passive control structure. The input energy to the structure during an earthquake is an important measure of seismic demand. Because of generality and applicability to non‐linear structures, the earthquake input energy has usually been computed in the time domain. It is shown here that the formulation of the earthquake input energy in the frequency domain is essential for deriving a bound on the earthquake input energy for a class of ground motions and for understanding the robustness of passively controlled structures to disturbances with various frequency contents. From the viewpoint of computational efficiency, a modal analysis‐based method is developed. The importance of overdamped modes in the energy computation of specific non‐proportionally damped models is demonstrated by comparing the energy transfer functions and the displacement transfer functions. Through numerical examinations for four recorded ground motions, it is shown that the modal analysis‐based method in the frequency domain is very efficient in the computation of the earthquake input energy. Copyright © 2004 John Wiley & Sons, Ltd.     

Identification of damage in reinforced concrete structures from earthquake records- optimal location of sensors

A method for the localization of structural damage in seismically excited reinforced concrete (RC) structures using a measured acceleration response time series is presented. From the measured response of some or all storeys, the two lowest smoothed eigenfrequencies and mode shape coordinates are estimated. These estimated values are used as an input to a developed substructure iteration method where local storey damages are estimated in such a way that these smoothed values are reproduced. The local damage indicator of a substructure is defined as the average reduction of the stiffness matrix of the initial undamaged substructure. The method is applied to simulated data of a six-storey, two-bay test frame (scale 1:5) that is to be tested at the Structural Laboratory of Aalborg University, Denmark. The simulations are performed using the non-linear finite element program SARCOF. Special emphasis is put on the investigation of the optimal location of measurement sensors, i.e. at which locations along the structure is the most information about the damage distribution gained. In all cases it is assumed that measurements are performed at top storey and ground surface, and the investigations are concentrated on putting one or two more measurement points in between. The two cases where the structure is excited in the first and second mode are investigated, and it is found that in general the sensors should be placed in the lower part of the structure. Furthermore, it is found that the method provides good results even when only the measurements at top storey and ground surface are used.     

Site responses based on ambient vibrations and earthquake data: a case study from the meizoseismal area of the 2001 Bhuj earthquake

The 2001 Mw 7.6 earthquake sourced in the Kachchh rift of northwest India led to extensive damage in the city of Bhuj, located ~70 km southwest of its epicenter. The building stock of this densely populated city was a mix of modern, single, and multistoried structures as well as traditional and non-engineered abodes, most of which were not designed to withstand severe shaking effects. Although there was extensive liquefaction and ground failure in the meizoseismal area, they were not observed in Bhuj, but the damage was severe here. In this study, we apply horizontal to vertical spectral ratio method to ambient vibrations (HVSR-AV) to obtain fundamental resonance frequency (f0) and H/V peak amplitude (A0) to examine if site response had any significant role in the observed damage. The patterns of H/V curves as well as spatial distributions of f0 (0.6–1.4 Hz) and A0 (1.5–4.4) suggest absence of any strong impedance contrast within the subsurface. Similar results obtained for ambient vibrations and earthquake signals suggest the efficacy of the HVSR-AV method as most useful for regions of low-level seismicity. The weathered sandstone that is generally exposed in the city represents the resonating layer whose thickness is approximately estimated as ~66–155 m, based on 1D assumption. The current set of available data precludes any quantitative modeling, but our preliminary inference is that site effects were not significant during the 2001 earthquake damage observed in Bhuj.     

Evolution of modal characteristics of a mid-rise cold-formed steel building during construction and earthquake testing

Vibration-based structural identification is an essential technique for assessing structural conditions by inferring information from the dynamic characteristics of structures. However, the robustness of such techniques in monitoring the progressive damage of real structures has been validated with only a handful of research efforts, largely due to the paucity of monitoring data recorded from damaged structures. In a recent experimental program, a mid-rise cold-formed steel building was constructed at full scale atop a large shake table and subsequently subjected to a unique multi-hazard scenario including earthquake, post-earthquake fire, and finally post-fire earthquake loading. Complementing the simulated hazard events, low-amplitude vibration tests, including ambient vibrations and white noise base excitation tests, were conducted throughout the construction and the test phases. Using the vibration data collected during the multi-hazard test program, this paper focuses on understanding the modal characteristics of the cold-formed steel building in correlation with the construction and the structural damage progressively induced by the simulated hazard events. The modal parameters of the building (i.e., natural frequencies, damping ratios, and mode shapes) are estimated using two input–output and two output-only time-domain system identification techniques. Agreement between the evolution of modal parameters and the observations of the progression of physical damage demonstrates the effectiveness of the vibration-based system identification techniques for structural condition monitoring and damage assessment.     

Approximating peak responses in seismically isolated buildings using generalized modal analysis

Although the ability to simulate accurately the detailed behavior of nonlinear isolation bearings and the effects of this nonlinearity on dynamic response of the isolated building is desirable, such detailed analyses are not feasible during initial design stages when bearing properties are being selected. However, it would be very beneficial to be able to estimate accurately key engineering demand parameters at the early stages of design to understand the dynamic response characteristics of the isolated structure and to balance and optimize the bearing and structural characteristics to achieve the performance goals set for the building. Unfortunately, classical modal response spectrum analysis methods do not provide accurate results for problems with large, nonclassical damping, as is characteristic of isolated buildings. To find a method capable of predicting peak building responses even with large nonclassical damping, generalized modal response spectrum analysis is implemented. The responses of several buildings having different heights and isolated by linear viscous as well as triple friction pendulum and single friction pendulum isolation systems are investigated. Generalized modal response spectrum analysis methods were found to give significantly better predictions for all systems compared with classical methods. The behavior of buildings isolated with single friction pendulum systems exhibiting sudden changes in stiffness could not be well predicted by either general or classical modal response spectrum analysis when effective damping was increased. Copyright © 2013 John Wiley & Sons, Ltd.     

Identification of soil–structure interaction effect in base-isolated bridges from earthquake records

Identification of system parameters with the help of records made on base-isolated bridge during earthquakes provides an excellent opportunity to study the performance of the various components of such bridge systems. Using a two-stage system identification methodology for non-classically damped systems, modal and structural parameters of four base-isolated bridges are reliably identified using acceleration data recorded during 18 earthquakes. Physical stiffness of reinforced concrete columns, dynamic properties of soil and foundation impedance are found by available theoretical models in conjunction with pertinent information from the recorded accelerographs. Soil–structure interaction (SSI) effect in these bridges is examined by comparing the identified and physical stiffness of the sub-structure components. It is found that SSI is relatively pronounced in bridges founded in weaker soils and is more strongly related to the ratio of pier flexural stiffness and horizontal foundation stiffness than soil shear modulus, G_s, alone. However, substantial reduction in G_s is observed for moderate seismic excitation and this effect should be taken into account while computing foundation impedance.