基于Pasternak地基模型和Adomian分解方法的扩底桩水平动力响应分析

工程上广泛采用基于Winkler模型的层状地基反力系数法对桩土水平动力响应进行分析,该方法忽略了地基土剪切作用的影响,与工程实际有一定偏差。另外,对桩土的非线性相互作用和如扩底桩、楔形桩等变截面桩问题常用的传递矩阵法或中心差分法,计算过程较为繁琐。基于Pasternak地基模型和Adomian分解方法,提出一种考虑地基土剪切作用的桩土水平动力相互作用近似计算方法,该方法计算简便且结果精度较高,对变截面桩问题有很好的适用性;并基于该方法,对扩底桩水平动力响应问题和影响因素进行分析。结果指出,扩底半径和上部桩周土弹性模量对扩底桩水平动力响应影响较大,随着扩底半径的增加和桩周土弹性模量的增大,扩底桩水平振动位移幅值逐渐减小。另外,在较低频率的荷载激励下,应考虑土层对桩的剪切作用。     

多年冻土区桥梁桩基础地震响应的模型振动试验研究

以青藏铁路高温不稳定多年冻土区"以桥代路"工程——清水河特大桥的桩基础为研究目标,在负温条件下对该桥梁桩基础结构的缩尺模型进行了地震荷载作用的模型振动试验,研究了地震荷载作用下桩-冻土相互作用,分析了结构的地震响应特征,明确了桩体动荷响应对桩周冻土地温和应变的影响规律,最后对地震荷载作用下高温不稳定多年冻土区桥梁桩基础的稳定性作出了评价.     

Effect of a forced harmonic vibration pile to its adjacent pile in layered elastic soil with double-shear model

A new model named double-shear model based on Pasternak foundation and Timoshenko beam theory is developed to evaluate the effect of a forced harmonic vibration pile to its adjacent pile in multilayered soil medium. The double-shear model takes into account the shear deformation and the rotational inertia of piles as well as the shear deformation of soil. The piles are simulated as Timoshenko beams, which are embedded in a layered Pasternak foundation. The differential equation of transverse vibration for a pile is solved by the initial parameter method. The dynamic interaction factors for the layered soil medium are obtained by the transfer matrix method. The formulation and the implementation have been verified by means of several examples. The individual shear effects of soil and piles on the interaction factors are evaluated through a parametric study. Compared to Winkler model with Euler beam, the present model gives much better results for the dynamic interaction of piles embedded in stiff soil with small slenderness ratios. Finally, the effect of a forced long pile to a short pile embedded in multilayered soil medium is studied in detail.     

Dynamic characteristics of lateral load-deflection relationships of flexible piles

Most offshore platforms are supported on long and large-diameter piles with variable wall-thickness along the length, and soil properties varying with depth. The design and analyses of these piles are made by modelling the soil-pile system with a beam-on-Winkler foundation. Therefore, evaluation of appropriate soil-pile springs for use in such analyses is a matter of concern. Fundamental characteristics of dynamic lateral load-deflection relationships for piles were studied analytically considering the soil-pile-structure interaction under seismic loading conditions. The soil layer was assumed homogeneous, linearly elastic with hysteretic type material damping, and overlying a rigid base. A superstructure with multi-degrees of freedom was supported by a single vertical pile hinged at the rigid base. Parametric studies were carried out to identify the influence of the system parameters on the behaviour of the dynamic lateral load-deflection relationships of piles. The lateral load-deflection relationships vary considerably with depth and are influenced not only by the dynamic properties of soil but also by the structural properties of a pile and loading conditions. These lateral load-deflection relationships can be used to define the soil-pile springs for the seismic response analysis of a soil-pile-structure system, and the results can be extended to problems with soil profiles with layering and non-linearity.     

多桩型复合地基作用机理与动力特性研究

对由碎石桩和CFG桩构成的多桩型复合地基的作用机理进行分析,通过数值模拟,对多桩型复合地基的动力特性进行研究,探讨桩型配比、桩径、桩长、CFG桩桩体刚度和碎石桩桩体渗透性等设计参数对多桩型复合地基动力特性的影响。研究结果表明:相同条件下地震期多桩型复合地基的动变形小于碎石桩复合地基而大于CFG桩复合地基,震后沉降量相对较小,在工程设计时碎石桩与CFG桩的桩型配比宜为4∶5;随桩体长度、桩体直径和CFG桩刚度的增加,多桩型复合地基地震期的竖向动变形逐渐减小;随碎石桩桩体渗透性的增加,多桩型复合地基中的超动孔隙水压力减小,震后沉降量降低。     

Dynamic stiffness of deep foundations with inclined piles

The influence of inclined piles on the dynamic response of deep foundations and superstructures is still not well understood and needs further research. For this reason, impedance functions of deep foundations with inclined piles, obtained numerically from a boundary element–finite element coupling model, are provided in this paper. More precisely, vertical, horizontal, rocking and horizontal–rocking crossed dynamic stiffness and damping functions of single inclined piles and 2 × 2 and 3 × 3 pile groups with battered elements are presented in a set of plots. The soil is assumed to be a homogeneous viscoelastic isotropic half‐space and the piles are modeled as elastic compressible Euler–Bernoulli beams. The results for different pile group configurations, pile–soil stiffness ratios and rake angles are presented. Copyright © 2010 John Wiley & Sons, Ltd.     

Nonlinear lateral interaction in pile dynamics

A model for pile lateral response to transient dynamic loading and to harmonic loading is presented allowing for nonlinear soil behaviour, discontinuity conditions at the pile-soil interface and energy dissipation through different types of damping. The approach is used to establish equivalent linear stiffness and damping parameters of single piles as well as dynamic interaction factors for approximate nonlinear analysis of pile groups. The applicability of these parameters to the pile-group analysis was examined, and a reasonable agreement with the direct analysis was found. The superposition technique may be used to analyze the response of small pile groups. Also, the dynamic stiffness of pile groups is greatly affected by both the nonlinear behavior of the soil and the slippage and gapping between the pile and soil. For a basic range of soil and pile parameters, equivalent linear stiffness and damping parameters of single piles and interaction factors for approximate nonlinear analysis are provided.     

考虑挤土效应时楔形桩纵向振动阻抗研究

基于复刚度传递多圈层平面应变模型,研究考虑桩周土挤土效应时成层地基中楔形桩的纵向振动问题。首先根据桩周土体的纵向成层情况并考虑楔形桩的变截面特性,将桩土系统沿纵向划分为有限个微元段,对每个微元段的桩周土体建立复刚度传递多圈层平面应变模型,并通过剪切复刚度递推方法求得桩周土作用在桩身的剪切复刚度;然后将求得的剪切复刚度代入桩身纵向振动控制方程,运用Laplace变换技术和阻抗函数递推方法,推导得到考虑桩周土挤土效应时成层地基中楔形桩纵向振动时桩顶复阻抗的解析解;最后,采用参数研究方法在低频范围内分析挤土效应对桩顶复阻抗的影响及其规律。     

3-D Simulation Study on Seismic Response of Bridge Piles in Landslide

The anti-slide support structure is widely used in the anti-seismic reinforcement of bridge foundations, but related experimental research was processing slowly. Based on the prototype of the Jiuzhaigou bridge at the Chengdu-Lanzhou Railway, a 3-D simulation model was established on the basis of the shaking table model test, and the rationality of the dynamic analysis model was verified by indicators such as the bending moment of the bridge piles, peak soil pressure, and PGA amplification factors. The results show that the inertia force of the bridge pier has an important influence on the deformation of the pile foundation. The bending moment and shearing force are larger in lateral bridge piles, and the maximum value is near the pile top. The PGA amplification factor is stronger in the back of the rear anti-slide piles and so is it in front of the bridge pier, and the soil is prone to slip and damage. The bedrock is rigid and the dynamic response is maintained at a low level. The anti-slide piles in the rear row play a major role in the anti-seismic reinforcement design, and the anti-slide piles in the front row can be used as an auxiliary support structure.     

Dynamic behaviour of pile foundations in homogeneous and non-homogeneous media

A three-dimensional formulation based on Green's functions of cylindrical loads in layered semi-infinite media is employed to investigate the dynamic behaviour of piles in homogeneous and non-homogeneous half spaces. The pile-soil-pile interaction taking place in pile groups is incorporated in the model. The results presented in this paper include the dynamic stiffnesses and dampings of single piles as well as those of representative 2 × 2 and 4 × 4 square pile groups in the soil media considered in this study. In addition, the distribution of forces applied on the pile cap among the individual piles in a group is investigated.     

Experimental study of near-shore pile-to-pile interaction

This paper presents the results of lateral impact load field tests carried out on a system of three steel pipe piles vibro-driven into soft clay in a near-shore marine environment, with the aim of evaluating the pile–soil–pile dynamic interaction. Piles are arranged in an “L” shaped horizontal layout and are instrumented with accelerometers at their free heads. The obtained results show the complex dynamic behaviour at very small strain of the vibrating soil–water–piles system. The role of different type of waves in the pile to pile interaction is investigated by analyzing the results in the time and frequency domains and by means of a time–frequency analysis. The effects of the pile spacing and input direction on these interaction mechanisms are also presented. Finally, important dynamic parameters of the soil, such as the velocities of the shear waves and surface waves (Scholte waves) of the upper soil are directly estimated from the time delays between signals recorded at the pile heads.     

A numerical and experimental study of hollow steel pile in layered soil subjected to vertical dynamic loading

This paper presents an investigation of the nonlinear behaviour of single piles subjected to varying levels of vertical dynamic load. A good number of tests are performed for the understanding of the dynamic behaviour of single hollow steel piles embedded in layered soil. Experimental results are validated with results obtained from a nonlinear numerical analysis using commercially available Finite Element Method (FEM) based software. The results of numerical analysis and experimental investigations showed that the length of pile has significant influence on resonant frequency and amplitude of the pile foundation. It has also been found that the slippage of pile from the surrounding soil considerably affects the resonance frequency and amplitude of the soil–pile foundation system.     

Nonlinear analysis for dynamic lateral pile response

An analysis of pile lateral response to transient dynamic loading and to harmonic loading is presented allowing for nonlinear soil behavior, discontinuity conditions at the pile-soil interface and energy dissipation through different types of damping. Furthermore, the effect of neighbouring piles is taken into account for piles in a group. The validity of the approach was examined and a reasonable agreement with field tests and more rigorous solutions was found. Equivalent linear stiffness and damping parameters of single piles and interaction factors for approximate nonlinear analysis are presented.     

Pile–soil–pile interaction in pile groups with batter piles under dynamic loads

A simple analytical solution is developed for computing the dynamic interaction tensor for floating pile groups with batter piles. For this purpose, the governing differential equations are derived for an unloaded batter floating pile closely spaced to another loaded pile with the same properties. The reaction of soil against pile deformation is modeled by the springs and dashpots along the length of the pile. The soil is assumed linear viscous elastic and the pile behavior is linear elastic. The closed form solutions of governing equations are obtained using appropriate boundary conditions. The results are verified and compared with rigorous and approximate analytical solutions for vertical piles. The proposed method can be readily applied by engineers in the design of pile groups with batter piles.     

地震作用下液化场地变截面桩与等截面桩的动力响应对比分析

为研究液化场地变截面桩的动力响应,依托翔安大桥实体工程,采用有限元软件,建立变截面桩－土和等截面桩－土相互作用模型,模拟液化场地变截面桩及等截面桩在地震作用下的振动反应,分析在地震作用下变截面位置不同的变截面桩及等截面桩的动力响应特征。结果表明:地震作用下,液化土层不同深度处的孔压比变化规律基本相同,均从0逐渐增大最后趋于稳定;变截面桩的桩身加速度和桩身位移均大于等截面桩,且桩顶加速度峰值出现的时刻均滞后于桩底;在饱和砂土层处,桩身位移变化趋势均较陡;变截面桩的桩身弯矩峰值和桩身剪力峰值均大于等截面桩,且其峰值出现的位置较等截面桩深;地震作用下,变截面桩及等截面桩的弯矩与剪力均在安全范围之内;液化场地变截面梁桥桩基础抗震设计时,应着重分析液化土层与非液化土层分界面以下的抗弯能力设计及液化土层中抗剪能力设计。     

Kinematic bending moments in pile foundations

In this paper the kinematic seismic interaction of single piles embedded in soil deposits is evaluated by focusing the attention on the bending moments induced by the transient motion. The analysis is performed by modeling the pile like an Euler–Bernoulli beam embedded in a layered Winkler-type medium. The excitation motion is obtained by means of a one-D propagation analysis. A comprehensive parametric analysis is carried out by varying the main parameters governing the dynamic response of piles like the soil properties, the bedrock location, the diameter and embedment in the bedrock of piles. On the basis of the parametric analysis, a new design formula for predicting the kinematic bending moments for both the cross-sections at the deposit–bedrock interface and at the pile head is proposed.     

Efficient analysis of pile-group effect on seismic stiffness and strength design of buildings

A new efficient method is developed for the analysis of pile-group effects on the seismic stiffness and strength design of buildings with pile foundations. An efficient continuum model consisting of a dynamic Winkler-type soil element and a pile is used to express the dynamic behavior of the structure-pile-soil system with only a small numerical error. The pile-group effect is taken into account through the influence coefficients among piles which are defined for interstory drifts and pile-head bending moments. It is shown that, while the pile-group effect reduces the interstory drift of buildings in general, it may increase the bending moment of piles at the head. This means that the treatment without the pile-group effect results in the conservative design for super-structures and requires a revised member design for piles.     

Winkler model for dynamic response of composite caisson–piles foundations: Seismic response

A simplified method with a dynamic Winkler model to study the seismic response of composite caisson–piles foundations (CCPF¹) is developed. Firstly, with the dynamic Winkler model, the kinematic response of the CCPF subjected to vertically propagating seismic S-wave is analyzed by coupling the responses of caisson part and pile part. Secondly, a simplified model for the foundation–structure system is created with the structure simplified as a lumped mass connected to the foundation with an elastic column, and through the Fast Fourier Transformation (FFT) this model is enabled to solve transient seismic problems. Thirdly, the proposed method for the seismic response of CCPF-structure systems is verified by comparison against 3D dynamic finite element simulation, in which the Domain Reduction Method (DRM²) is utilized. Lastly, the mechanism and significance of adding piles in improving the earthquake resistance of the foundation and structure is analyzed through an example with different soil conditions. Discovered in this study is that adding piles under the caisson is an efficient way to increase seismic resistant capability of the soil–foundation–structure system, and the main mechanism of that is the elimination of the pseudo-resonance.     

A numerical model for the dynamic analysis of inclined pile groups

The paper presents a numerical model for the dynamic analysis of pile groups with inclined piles in horizontally layered soil deposits. Piles are modelled with Euler–Bernoulli beams, while the soil is supposed to be constituted by independent infinite viscoelastic horizontal layers. The pile–soil–pile interaction as well as the hysteretic and geometric damping is taken into account by means of two‐dimensional elastodynamic Green's functions. Piles cap is considered by introducing a rigid constraint; the condensation of the problem permits a consistent derivation of both the dynamic impedance matrix of the soil–foundation system and the foundation input motion. These quantities are those used to perform inertial soil–structure interaction analyses in the framework of the substructure approach. Furthermore, the model allows evaluating the kinematic stress resultants in piles resulting from waves propagating in the soil deposit, taking into account the pile–soil–pile interactions. The model validation is carried out by performing accuracy analyses and comparing results in terms of dynamic impedance functions, kinematic response parameters and pile stress resultants, with those furnished by 3D refined finite element models. To this purpose, classical elastodynamic solutions are adopted to define the soil–pile interaction problem. The model results in low computational demands without significant loss of precision, compared with more rigorous approaches or refined finite element models. Copyright © 2015 John Wiley & Sons, Ltd.     

Dynamic analysis of piles and pile groups embedded in homogeneous soils

A boundary element formulation for the dynamic analysis of axially and laterally loaded single piles and pile groups is presented. The piles are represented by compressible beam-column elements and the soil as a hysteretic elastic half-space. The governing equations of motion for the pile domain have been solved exactly for distributed periodic loading intensities. These solutions are then coupled with a numerical solution for the motion of the soil domain by satisfying equilibrium and compatibility at the pile-soil interface. The results obtained from the analysis compare favourably with those from alternative analyses, e.g. finite element, but at greatly reduced computational costs.