中国云南哀牢山含海蓝宝石伟晶岩的起源和成岩模拟实验研究

The Ailaoshan aquamarine-bearing pegmatites are associated with Proterozoic metamorphic rocks in the southern portion of the Ailaoshan fault-folded complex.The gem-bearing pegmatite mineralization zones of the region occur in areas generally consistent with the regional tectonic trend.The pegmatites are found in metamorphic rocks,migmatites and in the inner/outer contact zones of gneissoid granites. The Rb-Sr isochron drawn for the pegmatites is 26～31 Ma,(i.e.in Himalayan).The homogenization temperatures of melt and liquid inclusions in minerals vary from 185 to 920℃,which are comparable to the inclusions observed in banded migmatites and ptygmatic quartz veins in the surrounding metamorphic rocks. The mineralization fluids of the pegmatite were rich in HCO_3 and CO_2,and their compositional assemblages are comparable to metamorphic fluids.Results of H,O,C,Si etc.isotopic analyses and REE,and Be analyses indicates that the sources of mineralization components that formed the pegmatites are closely associated with metamorphic fluids and the enclosing metamorphic rocks. A pegmatite structure simulation experiment was conducted at high temperature and pressure(840℃and 1,500×105Pa.),with various metamorphic rock samples in a water-rich and volatile-rich environment.When the liquidus was reached,the temperature was gradually decreased at the rate of 5～10℃/day over a time period of three months.SEM energy-dispersive spectrum analyses were performed on the experimental products.A series of pegmatoid textures were observed including zonal texture,megacryst texture,drusy cavities,crystal druses,and vesicular texture along with more than ten types of minerals including plagioclase,microcline,quartz and biotite.Different metamorphic rock melts generated different mineral assemblages.Experiment results revealed that the partial melting of metamorphic rocks could form melts similar to pegmatite magmas. Based upon the geological characteristics,geochemistry,and pegmatite texture simulation experimental results,it is concluded that the mineralization components of Ailaoshan aquamarine-bearing pegmatites came from metamorphic rocks.The petrogenetic model for the origin of pegmatites is related to ultrametamorphism and metamorphic anatexis.     

Pb-Zn-Ag-bearing M anganoan Skarns of China

Manganoan skarns consist of special Mn (Ca, Mg, Fe, Al) silicate metasomatic minerals and are usually associated with Pb-Zn(Ag) mineralization. They occur chiefly along the lithologic contacts or faults and fractures of carbonate wall rocks distal from the intrusive contact zone, and are combined with Fe, Cu, W, Sn and Cu-bearing calcic or magnesian skarns occurring in the contact zones to constitute certain metasomatic zoning. Manganoan skarns are formed later than calcic or magnesian skarns. Their rock-forming temperatures are lower than those of calcic or magnesian skarns. The mineral assemblages of manganoan skarns occurring in different carbonate rocks (limestone or dolomite) are notably different.     

青藏高原新生代火山岩矿物化学及其岩石学意义

This paper deals with the features of mineral chemistry about olivine, pyroxene, feldspar, sanidine megacryst and garnet megacryst from Cenozoic volcanic rocks, Qinghai-Tibet plateau. The forming condition including temperature and pressure of the volcanic rock series is also studied. The results show that olivine belongs to forsterite (Fo=81—85) and clinopyroxene is rich in TiO₂ (1.06%—1.74%). Especially the sanidine megacryst is optical homogeneous. There are not zonal texture, exsolution texture and twin crystal. It is low in ordering degree and belongs to K-sanidine. The garnet megacryst mainly consists of Alm and Pyr, which crystallization depth resembles the depth of middle crust. The mineral chemistry, major element and isotopic features indicate that of the Cenozoic volcanic rocks in the north part of the Qinghai-Tibet plateau mainly consists of shoshonite series formed in the intracontinental orogenic belt, which primary magma originated from a particular enrichment upmantle and accreted crust-mantle mixed belt.     

The Evolution of Alpine Ultramafic Rocks and Partial Melting of the Upper Mantle

Ultramafic rocks of Tibet and Xinjiang are the products of partial melting of the upper mantle. The evolution of their mineral composition is marked by two parallel evolutionary series: one is the progressive increase of the 100 Mg/(Mg+Fe~(2+) ratio of silicate minerals in order of lherzolite→harzburgite→dunite, i.e. the increase in magnesium; the other is the increase of the 100 Cr/(Cr+Al) ratio of accessory chrome spinel in the same order, i. e. the increase in Chromium. The above-mentioned evolutionary trends are contrary to that of magmatic differentiation. The evolution of fabrics of ultramafic rocks is characterized by progressive variation in order of protogranular texture→melted residual texture, symplectic texture and clastophyritic texture→equigranular mosaic texture and tabular mosaic texture. Experiments of partial melting of lherzolite have convincingly shown that the evolution of Alpine ultramafic rocks resulted from the partial melting of pyrolite. Various subtypes of them represent different degrees of partial melting. The vertical zoning marked by more basic rocks in the upper part and more acid rocks in the lower actually belongs to the fusion zoning of pyrolite.     

Geochemical Features and Formation of the Auriferous Cherts in the Mojiang Gold Deposit,Yunnan

Auriferous cherts in the Middle Carboniferous Jinchang Formation are the dominant host rocks of auriferous quartz veins and mixed orebodies comprised of gold-bearing quartz veins and cherts in the Mojiang gold deposit.The rocks exhibit sedimentary texture and structure and are composed of hot-water deposited minerals.The FeO,Fe2O3,Au and Ag contents of the auriferous cherts are high;the Cr,Ni and Co contents are also high but significantly variable;MnO/TiO2 and TFe/TiO2 ratios are relatively higy.As viewed from a few diagrams that distinguish different chert formations,the auriferous cherts are in or near the range of hot-water deposited cherts.Because the correlation coefficients between Au contents and those of Cr, Ni of the rocks are negative,a great Au amount in the cherts might not be brought about by later hydrothermal alterations.The rare-earth elements,O and Si isotopic compositions of the auriferous cherts demonstrate that the cherts belong to hot-water deposited rocks.The later hydrothermal alterations made the petrochemical compositions of the cherts deviate from the characteristics of hot-water deposition.In general,the geological and geochemical features of the auriferous cherts demonstrate that the rocks were formed by hot water deposition.     

福建省新生代火山岩岩石化学特征及与构造地质关系的讨论

Cenozoic volcanic rocks in Fujian are of Pliocene and Pleistocene ages and can be divided into three zones: the east volcanic rock zone consists mainly of tholeiite,file west zone is limburgite and the intermediate zone is transitional in character between the former two zones with a little prevalance of olivine basalt. Two rock types can be distinguished, i.e., the limburgites containing no feldspars and the basalts including olivine basalt and .tholeiitic basalt In terms of petrochemistry, the volcanic rocks can be classified as strong alkaline, alkaline and sub-alkaline suites.Most of the strong alkaline rocks are distributed in the west zone, while the alkaline is in the intermediate zone and the subalkaline occurs predominantly in the east zone.With increasing distance from the coastline, the rocks become progressively alkaline and the potassium content and K/Si ratio increase. Significant amount of mantle material, including garnet lherzolite xenoliths and pyrope xenocrysts, has been noticed in the above-mentioned volcanic rocks. The garnet lherzolite bears strong resemblance to “mantle rocks”, especially with respect to the high values of Mg and Fe. Garnets in these rocks are Cr-bearing pyrope, with pyrope component in excess of 60 percent.It is suggested that the original basaltic melt might have been resulted from partial melting of garnet lherzolite in the upper mantle and then extruded onto the surface along the ultra-deep fault in the Pacific plate.     

Types of Enclaves and Their Features and Origins in Intermediate-Acid Intrusive Rocks from the Tongling District, Anhui Province, China

Enclaves in intermediate-acid plutons from Tongling can be divided into three types: xenoliths, relics and magmatogenic enclaves. The magmatogenic enclaves consist of cumulates, micrograined dioritite mixtite and dioritic chilled border enclaves. Petrologically, relics with eyed and meta-poikilitic texture are characterized by high content of biotite (>80%) and low content of cordierite and grossular. The cumulates with accumulate texture consist of a great amount of pyroxene, hornblende and minor spinel and phlogopite. The micrograined dioritic mixtite is composed of more hornblendes and feldspar and less needle apatites and an ellipsoid basic core included in plagio-clase. The chilled border enclaves have the same mineral association, but more dark minerals than the host rocks consisting of plagioclase, quartz, alkaline feldspar, hornblende and biotite. Geochemically, the relics exhibit high REE content (455.8×10-6) and high ratio of LREE/HREE, more obvious Eu negative anomaly and are rich in Cr and     

Sources and Evolution of the Ore-forming Materials in the Anqing Cu-Fe Deposit in Anhui Province-Geological and S,C, O Isotopic ConstraintsEI北大核心CSCD

The Anqing Cu-Fe deposit is one of the representative large Cu-Fe deposits along the Yangtze River in Anhui province, with controversial metallogenic mechanism. Based on the ore-forming geological characteristics, this paper focus on the sulfur, carbon and oxygen isotopic compositions of the ores and surrounding rocks, and discuss the sources and evolution processes of the ore-forming materials. The Cu-Fe deposit occurs in the contact zone between the early Yanshanian Yueshan diorite and Triassic marble, with clear horizontal zonings in the skarns and ore bodies. The garnet skarn and thick massive magnetite ore body commonly occur within the external contact zone, which have clear boundaries with the surrounding rocks; whereas the diopside skarns with disseminated copper sulfide commonly occur within the internal contact zone and show gradual and transitional relations with the diorite. The δ34S values of the ores range from -6.5‰ to 10.6‰, and show a V-shaped trend from the diorite to the outer marble. This compositional variation indicates that most of the sulfur may come from magma, with involvement of some pre-Triassic clastic strata sulfur and Triassic marine sulfates in the later stage. The δ13C values of the gangue minerals range from -5.5‰ to 2.0‰, which decrease from the external contact zone to internal contact zone, indicating that the carbons of the ore-forming fluids may be mainly derived from magma, with some Triassic carbonate stratigraphic carbon involved. The marbles nearby the orebody show δ18O values lower than those of the Triassic strata, indicating that they have been remolded by the low δ18O magmatic hydrothermal fluids. The magnetite have some magma filling geological features and extremely low δ18O value, may be the result from the filling of the high temperature iron-rich fluids along the contact zone and fault. This study shows that the ore-magma filling type and hydrothermal-metasomatic type ore bodies coexist in the Anqing Fe-Cu deposit. The immiscibility between iron oxide and silicate melt occurred in magma chamber, which resulted in the formation of iron-rich fluid. The fluid migrated upward and eventually precipitated in a favorable tectonic area or contact zone, and the magnetite ore bodies were formed in the outer contact zone. By the later fluid mixing, filling metasomasis, and water-rock reaction between the differentiated hydrothermal solutions and diorite, the copper ore bodies and the copper-bearing altered diorite were formed in the internal contact zone. © 2018, Science Press. All right reserved.     

Discrimination Study on Fluid—Rock Interaction Between Metallogenic and Non—Metallogenic Sections in a Shear Zone

Discriminations in a local chemical,fluidal,mechanical and thermal processes in a shear zone will lead to metallogenic differentiation in a local section.This paper,based on the general geological setting of the Shibangou gold deposit in Xixia,Henan,deals with petrological and petrochemical samples of altered rocks in the metallogenic section and of mylonites in the non-metallogenic section of a selected shear zone.The discriminations in fluid-rock interaction and petrological mass balance between altered rocks near the orebody and mylonites in the shear zone are discussed as well.The results show that the petrological volume of altered rocks in the metallogenic section of the shear zone is almost always dilatant and the mylonite volume in the non-metallogenic section is almost always lost.Major elements in altered rocks from the metallogenic section and in mylonites from the non-metallogenic section always show a tendency of being enriched and depleted,respectively.Fluid-rock ratios in the mylonites(Nu=93.68-468.40)are larger than those of the altered rocks(NC(Ⅳ）^s=36.11-216.67).The gain and loss of major and trace elements from the altered rocks and mylonites in the shear zone are a composite process to be imported and exported by percolating fluids as well as of the loss and dilatancy of rock volume.     

The Geological Significance of the Deformation and Geochronology of the Xiaotian–Mozitan Shear Zone in the Dabie Orogenic Belt (East-Central China)

The Xiaotian–Mozitan Shear Zone(XMSZ) is the boundary of the Dabie High-grade Metamorphic Complex(DHMC) and the North Huaiyang Tectonic Belt. It was deformed in ductile conditions with a top-to-NW/WNW movement.Geothermometers applied to mineral parageneses in mylonites of the shear zone give a temperature range of 623–691°C for the predeformation and 515–568°C for the syndeformation, respectively, which indicates a retrograde process of evolution.A few groups of zircon U-Pb ages were obtained from undeformed granitic veins and different types of deformed rocks in the zone. Zircons from the felsic ultramylonites are all magmatic, producing a weighted mean 206 Pb/238 U age of 754 ± 8.1 Ma, which indicates the time of magmatic activities caused by rifting in the Neoproterozoic. Zircons from the granitic veins, cutting into the mylonites, are also of magmatic origin, producing a weighted mean 206 Pb/238 U age of 130 ± 2.5 Ma,which represents the time of regional magmatic activity in the Cretaceous. Zircons from the mylonitic gneisses are of anatectic-metamorphic origins and are characterized by a core-mantle interior texture, which yielded several populations of ages including the Neoproterozoic ages with a weighted mean 206 Pb/238 U age of 762 ± 18 Ma, similar to that of the felsic ultramylonites and the Early Cretaceous ages with a weighted mean 206 Pb/238 U age of 143 ± 1.8 Ma, indicating the anatectic metamorphism in the Dabie Orogenic Belt(DOB). Based on integrated analysis of the structure, thermal conditions of ductile deformation and the contact relations of the dated rocks, the activation time of the Xiaotian–Mozitan Shear Zone is constrained between ～143 Ma and 130 Ma, during which the DOB was undergoing a transition in tectonic regime from compression to extension. Therefore, the deformation and evolution of this shear zone plays an instrumental role in fully understanding this process. This research also inclines us to the interpretation of it as an extensional detachment, with regard to the tectonic properties of the shear zone. It may also be part of a continental scale extension in the background of the North China Block's cratonic destruction, dominated by the subduction and roll-back of the Paleo-Pacific plate, but more detailed work is needed in order to unravel its complicated development.     

Low-Pressure Metamorphism of Granulite Facies in an Early Proterozoic Orogenic Event in Central Inner Mongolia

According to the kinds of feldspar and rock associations in the Ai-rich gneisses, the low-pressure metamorphic crust of the Early Proterozoic granulite facies in central Inner Mongolia can be divided into southern and northern belts which are composed of six rock associations. They represent the relevant rock sequences of the layered metamorphic rock series formed under specific metamorphic temperature and pressure conditions as well as tectonic environments. Mineral inclusions and reaction texture have recorded that the medium-temperature high-pressure mineral assemblages are replaced by the high-temperature low-pressure mineral assemblages, thus, giving rise to: garnet+quartz→ hypersthene+plagioclase; kyanite→sillimanite and garnet+kyanite/sillimanite+quartz→cordierite. The deformation fabrics of the rocks, the change of mineral assemblages and the PTt path of metamorphism indicate that the contempranceous high-temperature normal-slip ductile shearing is the main cause of the formation of the low-pressure metamorphic crust of granulite facies. In the orogenic event, the co-action of thrusting and extension resulted in the change of a medium-temperature high-pressure metamorphic environment into the high-temperature low-pressure metamorphic conditions.     

南岭诸广山花岗岩体的多次侵入活动和某些地球化学特征

The eleven successive magmatic activities of the southern mass of the Zhuguangshan granitic batholith can be divided into four intrusive episodes: Calidonian, Late Hercynian, Yenshanian and one of younger age, based on intrusive contact observations in the field, isotope ages and petrological-geochemical evidences, Genetically, rocks of each of the four episodes have their own features. The Yenshanian granites are characterized by a strong tendency toward differenciation. Variation in oxygen fugacity and in lithofacil character of the rocks indicates that the two earlier phases of the Yenshanian granites are emplaced in greater depth in a tectonick stable environment,while the later two phases are of relatively hypobyssal character under more active geological conditions.     

STRESS-METAMORPHISM AND ISOTOPIC AGE OF SHEAR ZONE GRANITOID TECTONITES OF IRTYSH SHEAR ZONE (ALTAI REGION)

The Irtysh shear zone (ISZ) of Altai region is the lineament structure of the collision-suture type, where granites of Kalba complex and granodiorites of Zmeinogorsk complex are exposed to regional gneiss-formation and stress-metamorphic alterations. This study is based on detailed structural observations at special grounds using optical and electron microscopy, and on the behavior analysis of isotopic systems from altered granitoids.Within the ISZ area we have established the continuous rows of granitoid stress-metamorphism from initial recrystallization of protolite, its cataclasis and mechanical flaring up to complete recrystallization with alteration of mineral composition and formation of the streaky complexes of granite tectonites of blastomylonite and blastocataclasite types. The directed alteration of rocks has several impulse and is expressed by a change in morphology of mineral grains and their relations, magnification of deformation component in the rock structure, and formation of new mineral phases on the basis of initial ones without surface fluidization. At transformation of isotopic systems from granitoid, their feldspars,biotite and hornblende, we can observe “rejuvenation“ of the rock substrate from 270- 290 Ma for Kalba granitoids to 220-235 Ma for their tectonites, and for Rudny Altai granodiorites, their ages changes from 285-317 Ma to 232-257 Ma for their tectonites.     

http://www.sciencedirect.com/science/article/pii/S1674987113000315

The Panzhihua gabbroic intrusion,part of the plumbing system of the Emeishan large igneous province, intruded late-Proterozoic dolomites and marls about～263 Ma ago.The dolomites in the contact aureole were converted to brucite marbles and a diverse suite of forsterite,diopside and garnet skarns.The variation in mineralogy is explained in part by differences in the composition of the protolith,particularly the proportion of silica minerals and clay,and in part by transfer of elements from intruding magmas.The trace element compositions of most marbles and skarns are very similar to those of unmetamorphosed dolomites and marls,but some contain high Si,Ti,and Fe contents that are interpreted to have come from a magmatic source.Three brucite marbles sampled～10 m from the contact of the intrusion and named "enriched brucite marble" have trace element compositions very different from their dolomitic protolith:their rare earth elements are strongly enriched whereas levels of Nb-Ta,Zr-Hf and Ti are very low.These characteristics resemble those of carbonate liquid in equilibrium with silicate liquid or more probably with silicate minerals in the case of Panzhihua,a similarity we take to indicate that the sample underwent partial melting.Samples taken up to 300 m from the contact contain brucite indicating that high temperatures persisted well into the country rocks.However,other samples collected only tens of metres from the contact are only slightly recrystallized indicating that conditions in the aureole were highly variable.We suggest that temperatures within the aureole were controlled by conduction of heat from the main intrusion and by supply of additional heat from abundant small dykes within the aureole.Circulation of fluids derived from deeper levels in the aureole flushed the carbon dioxide from the dolomite,lowering temperature needed to partially melt carbonate to the temperatures attained near the intrusion.Irregular but extensive heating destabilized the carbonates of the aureole and decarbonation reactions associated with carbonate breakdown and melting emitted a large volume of CO₂,with potential impact on global climate.     

STRESS-METAMORPHISM AND ISOTOPIC AGE OF SHEAR ZONE GRANITOID TECTONITES OF IRTYSH SHEAR ZONE (ALTAI REGION)

The Irtysh shear zone (ISZ) of Altai region is the lineament structure of the collision-suture type, where granites of Kalba complex and granodiorites of Zmeinogorsk complex are exposed to regional gneiss-formation and stress-metamorphic alterations. This study is based on detailed structural observations at special grounds using optical and electron microscopy, and on the behavior analysis of isotopic systems from altered granitoids.Within the ISZ area we have established the continuous rows of granitoid stress-metamorphism from initial recrystallization of protolite, its cataclasis and mechanical flaring up to complete recrystallization with alteration of mineral composition and formation of the streaky complexes of granite tectonites of blastomylonite and blastocataclasite types. The directed alteration of rocks has several impulse and is expressed by a change in morphology of mineral grains and their relations, magnification of deformation component in the rock structure, and formation of new mineral phases on the basis of initial ones without surface fluidization. At transformation of isotopic systems from granitoid, their feldspars,biotite and hornblende, we can observe “rejuvenation“ of the rock substrate from 270- 290 Ma for Kalba granitoids to 220-235 Ma for their tectonites, and for Rudny Altai granodiorites, their ages changes from 285-317 Ma to 232-257 Ma for their tectonites.     

Trace Elements of Multi-stage Minerals and Titanite U-Pb Dating for the Gneisses from Liansan Island, Sulu UHPM Belt

Gneisses with anatectic characteristics from the Liansan island in the Sulu UHPM (ultra-high pressure metamorphic) belt were studied for petrography, titanite U-Pb dating and mineral geochemistry. Three origins of garnets are distinguished: metamorphic garnet, peritectic garnet and anatectic garnet, which are formed in the stages of peak metamorphism, retrograde anatexis and melt crystallization, respectively. The euhedral titanite has a high content of REE and high Th/U ratios, which is interpreted as indicating that it was newly-formed from an anatectic melt. The LA-ICP-MS titanite U-Pb dating yields 214–217 Ma ages for the titanite (melt) crystallization. The distribution of trace elements varies in response to the different host minerals at different stages. At the peak metamorphic stage, Y and HREE are mainly hosted by garnet, Ba and Rb by phengite, Sr, Nb, Ta, Pb, Th, U and LREE by allanite and Y, U and HREE by zircon. During partial melting, Y, Pb, Th, U and REE are released into the melt, which causes a dramatic decline of these element contents in the retrograde minerals. Finally, titanite absorbs most of the Nb, U, LREE and HREE from the melt. Therefore, the different stages of metamorphism have different mineral assemblages, which host different trace elements.     

Cenozoic Volcanism and Intraplate Subduction at the Northern Margin of the Tibetan Plateau

Developed in the Mt.Kunlun orogenic belt at the northern margin of the Tibetan Plateau is an active Cenozoic volcanic zone which is more than 1000km in length and some ten to hundred kilometers in width.It extends east-westwards and is roughly parallet to the strike of Mt.Kunlun.The Cenozoic volcanic rocks are divided into the northern(N-)and southern(S-)subzones.Eruptions of volcanic lavas in the S-subzone are related to an initial rift zone within the north Qiangtang terrane,but the volcanic rocks in the N-subzone are relatively close to the contact zone between the Mt.Kunlun and the Tarim terrane.The space-time distribution,petrological and geochemical features can be explained by a model of southward intraplate subduction of the Tarim terrane.     

The Liaonan Metamorphic Core Complex： Constitution, Structure and Evolution

The Liaonan metamorphic core complex (mcc) has a three-layer structure and is constituted by five parts, i.e. a detachment fault zone, an allochthonous upper plate and an supradetachment basin above the fault zone, and highly metamorphosed rocks and intrusive rocks in the lower plate. The allochthonous upper plate is mainly of Neoproterozoic and Paleozoic rocks weakly deformed and metamorphosed in pre-Indosinan stage. Above these rocks is a small-scale supradetachment basin of Cretaceous sedimentary and volcanic rocks. The lower plate is dominated by Archean TTG gneisses with minor amount of supracrustal rocks. The Archean rocks are intruded by late Mesozoic synkinematic monzogranitic and granitic plutons. Different types of fault rocks, providing clues to the evolution of the detachment fault zone, are well-preserved in the fault zone, e.g. mylonitic gneiss, mylonites, brecciated mylonites, microbreccias and pseudotachylites. Lineations in lower plate granitic intrusions have consistent orientation that indicate uniform top-to-NW shearing along the main detachment fault zone. This also provides evidence for the synkinematic characteristics of the granitic plutons in the lower plate. Structural analysis of the different parts in the mcc and isotopic dating of plutonic rocks from the lower plate and mylonitic rocks from detachment fault zone suggest that exhumation of the mcc started with regional crustal extension due to crustal block rotation and tangential shearing. The extension triggered magma formation, upwelling and emplacement. This event ended with appearance of pseudotachylite and fault gauges formed at the uppermost crustal level. U-Pb dating of single zircon grains from granitic rocks in the lower plate gives an age of 130±5 Ma, and biotite grains from the mam detachment fault zone have 40Ar-39Ar ages of 108-119 Ma. Several aspects may provide constraints for the exhumation of the Liaonan mcc. These include regional extensional setting, cover/basement contact, temporal and spatial coupling of extension and magmatism, basin development and evolution of fault tectonites along detachment fault zone. We propose that the exhumation of the Liaonan mcc resulted from regional extension and thinning of crust or lithosphere in eastern North China, and accompanied with synkinematic intrusion of granitic plutons, formation of detachment fault zone, uplifting and exhumation of lower-plate rocks, and appearance of supradetachment basin.     

P-T-t Path of Mafic Granulite Metamorphism in Northern Tibet and Its Geodynamical Implications

Mafic granulites have been found as structural lenses within the huge thrust system outcropping about 10 km west of Nam Co of the northern Lhasa Terrane, Tibetan Plateau. Petrological evidence from these rocks indicates four distinct metamorphic assemblages. The early metamorphic assemblage (M1) is preserved only in the granulites and represented by plagioclase+hornblende inclusions within the cores of garnet porphyroblasts. The peak assemblage (M2) consists of garnet+clinopyroxene+hornblende+plagioclase in the mafic granulites. The peak metamorphism was followed by near-isothermal decompression (M3), which resulted in the development of hornblende+plagioclase symplectites surrounding embayed garnet porphyroblasts, and decompression-cooling (M4) is represented by minerals of hornblende+plagioclase recrystallized during mylonization. The peak (M2) P-T conditions of garnet+ clinopyroxene+plagioclase+hornblende were estimated at 769-905℃ and 0.86-1.02 GPa based on the geothermometers and geobarometers. The     

Petrology and phase equilibrium modeling of sapphirine ＋ quartz assemblage from the Napier Complex,East Antarctica： Diagnostic evidence for Neoarchean ultrahigh-temperature metamorphism

A synthesis of the petrological characters of granulite facies rocks that contain equilibrium sapphirine ＋ quartz assemblage from two localities （Tonagh Island （TI） and Priestley Peak （PP）） in the Napier Complex,East Antarctica,provides unequivocal evidence for extreme crustal metamorphism possibly associated with the collisional orogeny during Neoarchean.The reaction microstructures associated with sapphirine ＋ quartz vary among the samples,probably suggesting different tectonic conditions during the metamorphic evolution.Sapphirine and quartz in TI sample were probably in equilibrium at the peak stage,but now separated by corona of Grt ＋ Sil ＋ Opx suggesting near isobaric cooling after the peak metamorphism,whereas the Spr ＋ Qtz ＋ Sil ＋ Crd ＋ Spl assemblage replaces garnet in PP sample suggesting post-peak decompression.The application of mineral equilibrium modeling in NCKFMASHTO system demonstrated that Spr ＋ Qtz stability is lowered down to 930 ℃ due to small Fe3＋ contents in the rocks （mole Fe2O3/（FeO ＋ Fe2O3） =0.02）.The TI sample yields a peak p-T range of 950-1100 ℃ and 7.5-11 kbar,followed by cooling toward a retrograde stage of 800-950 ℃ and 8-10 kbar,possibly along a counterclockwise p-T path.In contrast,the peak condition of the PP sample shows 1000-1050 ℃ and ＞12 kbar,which was followed by the formation ofSpr ＋ Qtz corona around garnet at 930-970 ℃ and 6.7-7.7 kbar,suggesting decompression possibly along a clockwise p-T trajectory.Such contrasting p-T paths are consistent with a recent model on the structural framework of the Napier Complex that correlates the two areas to different crustal blocks.The different p-T paths obtained from the two localities might reflect the difference in the tectonic framework of these rocks within a complex Neoarchean subduction/collision belt.