Volcanism in the earliest stage of back-arc rifting in the Izu-Bonin arc revealed by laser-heating Ar/Ar dating

The back-arc region of the Izu-Bonin arc has complex bathymetric and structural features, which, due to repeated back-arc rifting and resumption of arc volcanism, have prevented us from understanding the volcano-tectonic history of the arc after 15 Ma. The laser-heating ⁴⁰Ar/³⁹Ar dating technique combined with high density sampling of volcanic rocks from the back-arc region of this arc successfully revealed the detailed temporal variation of volcanism related to the back-arc rifting. Based on the new ⁴⁰Ar/³⁹Ar dating results: (1) Back-arc rifting initiated at around 2.8 Ma in the middle part of the Izu-Bonin arc (30°30′N–32°30′N). Volcanism at the earliest stage of rifting is characterized by the basaltic volcanism from north–south-trending fissures and/or lines of vents. (2) Following this earliest stage of volcanism, at ca. 2.5 Ma, compositionally bimodal volcanism occurred and formed small cones in the wide area. This volcanism and rifting continued until about 1 Ma in the region west of the currently active rift zone. (3) After 1 Ma, active volcanism ceased in the area west of the currently active rift zone, and volcanism and rifting were confined to the currently active rift zone. The volcano-tectonic history of the back-arc region of the Izu-Bonin arc is an example of the earliest stage of back-arc rifting in the oceanic island arc. Age data on volcanics clearly indicate that volcanism changed its mode of activity, composition and locus along with a progress of rifting.     

Possible Miocene rifting of the Izu–Ogasawara (Bonin) arc deduced from magnetic anomalies

A magnetic anomaly map of the northern part of the Philippine Sea plate shows two conspicuous north–south rows of long-wavelength anomalies over the Izu–Ogasawara (Bonin) arc, which are slightly oblique to the present volcanic front. These anomalies are enhanced on reduced-to-pole and upward-continued anomaly maps. The east row is associated with frontal arc highs (the Shinkurose Ridge), and the west row is accompanied by the Nishi-Shichito Ridge. Another belt of long-wavelength anomalies very similar to the former two occurs over the Kyushu–Palau Ridge. To explain the similarity of the magnetic anomalies, it is proposed that after the spreading of the Shikoku Basin separated the Izu–Ogasawara arc from the Kyushu–Palau Ridge, another rifting event occurred in the Miocene, which divided the Izu–Ogasawara arc into the Nishi-Shichito and Shinkurose ridges. The occurrence of Miocene rifting has also been suggested from the geology of the collision zone of the Izu–Ogasawara arc against the Southwest Japan arc: the Misaka terrain yields peculiar volcanic rocks suggesting back-arc rifting at ～ 15 Ma. The magnetic anomaly belts over the Izu–Ogasawara arc do not extend south beyond the Sofugan Tectonic Line, suggesting a difference in tectonic history between the northern and southern parts of the Izu–Ogasawara arc. It is estimated that the Miocene extension was directed northeast–southwest, utilizing normal faults originally formed during Oligocene rifting. The direction is close to the final stage of the Shikoku Basin spreading. On a gravity anomaly relief map, northeast–southwest lineaments can be recognized in the Shikoku Basin as well as over the Nishi-Shichito Ridge. We thus consider that lines of structural weakness connected transform faults of the Shikoku Basin spreading system and the transfer faults of the Miocene Izu–Ogasawara arc rifting. Volcanism on the Nishi-Shichito Ridge has continued along the lines of weakness, which could have caused the en echelon arrangement of the volcanoes.     

Spatial and temporal evolution of arc volcanism in the northeast Honshu and Izu‐Bonin Arcs: Evidence of small‐scale convection under the island arc?

Abstract   Arc volcanism of the past 10 my in the northeast Honshu and Izu-Bonin Arcs shows several notable features. In the northeast Honshu Arc, the spatial distribution of volcanism exhibits several clusters elongated nearly perpendicular to the arc and the possible migration of volcanism from the back-arc side to the volcanic front side, at least, during the past 5 my. The pattern of clusters seems to have flip-flopped around 5 Ma. In the Izu-Bonin Arc, there are a series of across-arc seamount chains, in which volcanic activity occurred from ca 17 Ma to ca 3 Ma, similar to the clusters of the northeast Honshu Arc, although the recent active rifting occurs almost parallel to the arc. On the basis of studies of numerical modeling, these features might be explained, at least qualitatively, by the small-scale convection under the island arc. Several inferences can be made from our modeling results for the tectonics of the Izu-Bonin Arc. The angle of dip of subducting plate in the Izu-Bonin Arc might have increased. This can explain the disappearance of volcanism along the seamount chains and the recent along-arc volcanism with narrow rifting. The trend of seamount chains, which is oblique to the arc, might not be their intrinsic feature but rather a result of the lateral movement of the back-arc region after their formation. These inferences can be tested by the future detailed morphological and chronological studies of the Izu-Bonin Arc.     

The composition of back-arc basin lower crust and upper mantle in the Mariana Trough: A first report

Abstract The Mariana Trough is an active back-arc basin, with the rift propagating northward ahead of spreading. The northern part of the Trough is now rifting, with extension accommodated by combined stretching and igneous intrusion. Deep structural graben are found in a region of low heat flow, and we interpret these to manifest a low-angle normal fault system that defines the extension axis between 19°45' and 21°10'N. A single dredge haul from the deepest (∼5.5 km deep) of these graben recovered a heterogeneous suite of volcanic and plutonic crustal rocks and upper mantle peridotites, providing the first report of the deeper levels of back-arc basin lithosphere. Several lines of evidence indicate that these rocks are similar to typical back-arc basin lithosphere and are not fragments of rifted older arc lithosphere. Hornblende yielded an ⁴⁰Ar/³⁹Ar age of 1.8 ± 0.6 Ma, which is interpreted to approximate the time of crust formation. Harzburgite spinels have moderate Cr# (<40) and coexisting compositions of clinopyroxene (CPX) and plagioclase (PLAB) fall in the field of mid-ocean ridge basalt (MORB) gabbros. Crustal rocks include felsic rocks (70-80% SiO₂) and plutonic rocks that are rich in amphibole. Chemical compositions of crustal rocks show little evidence for a 'subduction component', and radiogenic isotopic compositions correspond to that expected for back-arc basin crust of the Mariana Trough. These data indicate that mechanical extension in this part of the Mariana Trough involves lithosphere that originally formed magmatically. These unique exposures of back-arc basin lithosphere call for careful study using ROVs and manned submersibles, and consideration as an ocean drilling program (ODP) drilling site.     

Silicic arc volcanism in Central Luzon, the Philippines: Characterization of its space, time and geochemical relationship

Abstract   The silicic volcanic rocks in Central Luzon show a temporal and spatial relationship with its geochemistry. Volcanic centers dated to approximately 5 Ma are silicic in geochemical composition whereas those between <5–1 Ma expose basaltic to andesitic rocks. Volcanic centers dated <1 Ma are characterized by a wide range of geochemistry encompassing basaltic through andesitic to dacitic signatures. Aside from changes in geochemistry through time, the areas (i.e. fore-arc to back-arc region) where the volcanic centers are formed also vary. The shift in the location of the volcanic centers in Central Luzon is attributed to changes in the dip of subduction of the South China Sea crust along the Manila Trench. Flat subduction resulted from the subduction of the Scarborough Seamount Chain, an oceanic bathymetric high along the Manila Trench west of northern Luzon. However, collision of Luzon with Taiwan in the north and Palawan in the south resulted in steepening of the subduction angle. The silicic volcanic centers in the forearc (Ce/Yb = 20–140) and back-arc (Ce/Yb = 20–60) regions are generally characterized by higher Ce/Yb compared to the basaltic-andesitic volcanic rocks in the main volcanic arc (Ce/Yb = 20) and back-arc (Ce/Yb = 20–30) regions. This across-arc geochemical variation highlights the contributions from the slab, mantle and crust coupled with the effects of geochemical processes that include partial melting, fractionation, magma mixing and mantle–melt interaction.     

K–Ar ages of the basaltic rocks from Far East Russia: Constraints on the tectono-magmatism associated with the Japan Sea opening

K–Ar ages of the Cenozoic basaltic rocks from the Far East region of Russia (comprising Sikhote-Alin and Sakhalin) are determined to obtain constraints on the tectono-magmatic evolution of the Eurasian margin by comparison with the Japanese Islands, Northeast China, and the formation of the back-arc basin. In the early Tertiary stage (54–26 Ma), the northwestward subduction of the Pacific Plate produced the active continental margin volcanism of Sikhote-Alin and Sakhalin, whereas the rift-type volcanism of Northeast China, inland part of the continent began to develop under a northeast–southwest-trending deep fault system. In the early Neogene (24–17 Ma), a large number of subduction-related volcanic rocks were erupted in connection with the Japan Sea opening. After an inactive interval of the volcanism ∼ 20–13 Ma ago, the late Neogene (12–5 Ma) volcanism of Sikhote-Alin and Sakhalin became distinct from those of the preceding stages and indicated within-plate geochemical features similar to those of Northeast China, in contrast to the Japan Arc which produces island arc volcanism. During the Japan Sea opening, the northeastern Eurasian margin detached and became a continental island arc system, and an integral part of continental eastern Asia comprising Sikhote-Alin, Sakhalin and Northeast China, and the Japan Arc with a back-arc basin. The convergence between the Eurasian Plate, the Pacific Plate and the Indian Plate may have contributed to the Cenozoic tectono-magmatism of the northeastern Eurasian continent.     

Early history of the Izu–Bonin – Mariana arc system: Evidence from Belau and the Palau Trench

Volcanic rocks of the Kyushu–Palau Ridge (KPR) from Deep Sea Drilling Project (DSDP) site 448 and from Belau comprise a low-to-medium-K arc tholeiitic series. Belau rocks include (probable) Mid-Eocene low-Ca type-3 boninite and pre-Early Oligocene–Early Miocene low-K arc tholeiitic basalt, basaltic andesite, andesite and dacite. Palau Trench samples include sparsely phyric high-Mg, -Cr and -Ni rocks which resemble the Belau boninite and Izu–Bonin – Mariana (IBM) system boninites. The high-Mg Palau Trench samples also resemble other primitive arc lavas (e.g. arc picrites). Their chemistry suggests an origin involving steep thermal gradients in multiply depleted mantle. Subduction of hot, young lithosphere under a young hot upper plate is postulated to explain this occurrence. The KPR is inferred to be the source of Eocene boninite and arc tholeiitic terranes presently in forearc regions of the IBM system. A model is presented here showing how many IBM boninites may have originated in a small area near Belau. These have migrated eastward by episodic back-arc opening accompanying eastward migration of arcs and trenches. Oldest known KPR rocks ( ca 47.5 Ma at DSDP site 296), and presumed KPR-derived exotic terranes of Guam ( ca 43.8 Ma), presage the postulated Eocene ( ca 42–43 Ma) change in Pacific plate motion invoked as the cause of subduction initiation at the KPR. The KPR has been rotated more than 40° clockwise since the Eocene, thus the age mismatch may indicate a different tectonic style, for example transtension or transpression, in earliest KPR history.     

Submarine hydrothermal manganese deposits in the Izu–Bonin – Mariana arc: An overview

Submarine hydrothermal manganese deposits are relatively common along the Izu–Bonin – Mariana (IBM) arc but hydrothermal iron crusts are much less so. The hydrothermal manganese deposits show characteristics typical of submarine hydrothermal manganese deposits found worldwide. Recent hydrothermal manganese deposits associated with active hydrothermal systems occur on seamounts or rifts located ∼ 5–40 km behind the volcanic front on the Shichito-Iwojima Ridge, IBM. Fossil hydrothermal manganese deposits associated with older hydrothermal systems occur on inactive seamounts located on ridges running parallel to the volcanic front in both forearc and back-arc settings. These fossil hydrothermal manganese deposits are generally overlain by younger hydrogenetic manganese crusts. Differences in minor element composition and in the rare earth element pattern of hydrothermal manganese deposits from the forearc and back-arc settings may reflect differences in the nature of substrate rocks or temperature of the hydrothermal fluids at these locations.     

Back-arc rifting in the Izu-Bonin Island Arc: Structural evolution of Hachijo and Aoga Shima Rifts

Abstract Multi- and single-channel seismic profiles are used to investigate the structural evolution of back-arc rifting in the intra-oceanic Izu-Bonin Arc. Hachijo and Aoga Shima Rifts, located west of the Izu-Bonin frontal arc, are bounded along-strike by structural and volcanic highs west of Kurose Hole, North Aoga Shima Caldera and Myojin Sho arc volcanoes. Zig-zag and curvilinear faults subdivide the rifts longitudinally into an arc margin (AM), inner rift, outer rift and proto-remnant arc margin (PRA). Hachijo Rift is 65 km long and 20–40 km wide. Aoga Shima Rift is 70 km long and up to 45 km wide. Large-offset border fault zones, with convex and concave dip slopes and uplifted rift flanks, occur along the east (AM) side of the Hachijo Rift and along the west (PRA) side of the Aoga Shima Rift. No cross-rift structures are observed at the transfer zone between these two regions; differential strain may be accommodated by interdigitating rift-parallel faults rather than by strike- or oblique-slip faults. In the Aoga Shima Rift, a 12 km long flank uplift, facing the flank uplift of the PRA, extends northeast from beneath the Myojin Knoll Caldera. Fore-arc sedimentary sequences onlap this uplift creating an unconformity that constrains rift onset to ～1-2Ma. Estimates of extension (～3km) and inferred age suggest that these rifts are in the early syn-rift stage of back-arc formation. A two-stage evolution of early back-arc structural evolution is proposed: initially, half-graben form with synthetically faulted, structural rollovers (ramping side of the half-graben) dipping towards zig-zagging large-offset border fault zones. The half-graben asymmetry alternates sides along-strike. The present ‘full-graben’ stage is dominated by rift-parallel hanging wall collapse and by antithetic faulting that concentrates subsidence in an inner rift. Structurally controlled back-arc magmatism occurs within the rift and PRA during both stages. Significant complications to this simple model occur in the Aoga Shima Rift where the east-dipping half-graben dips away from the flank uplift along the PRA. A linear zone of weakness caused by the greater temperatures and crustal thickness along the arc volcanic line controls the initial locus of rifting. Rifts are better developed between the arc edifices; intrusions may be accommodating extensional strain adjacent to the arc volcanoes. Pre-existing structures have little influence on rift evolution; the rifts cut across large structural and volcanic highs west of the North Aoga Shima Caldera and Aoga Shima. Large, rift-elongate volcanic ridges, usually extruded within the most extended inner rift between arc volcanoes, may be the precursors of sea floor spreading. As extension continues, the fissure ridges may become spreading cells and propagate toward the ends of the rifts (adjacent to the arc volcanoes), eventually coalescing with those in adjacent rift basins to form a continuous spreading centre. Analysis of the rift fault patterns suggests an extension direction of N80°E ± 10° that is orthogonal to the trend of the active volcanic arc (N10°W). The zig-zag pattern of border faults may indicate orthorhombic fault formation in response to this extension. Elongation of arc volcanic constructs may also be developed along one set of the possible orthorhombic orientations. Border fault formation may modify the regional stress field locally within the rift basin resulting in the formation of rift-parallel faults and emplacement of rift-parallel volcanic ridges. The border faults dip 45–55° near the surface and the majority of the basin subsidence is accommodated by only a few of these faults. Distinct border fault reflections decreases dips to only 30° at 2.5 km below the sea floor (possibly flattening to near horizontal at 2.8 km although the overlying rollover geometry shows a deeper detachment) suggesting that these rifting structures may be detached at extremely shallow crustal levels.     

Across-arc variation of lava chemistry in the Izu-Bonin Arc: identification of subduction components

In order to understand the role of the subducted lithosphere in producing the geochemical characteristics of arc magmas, major- and trace-element along with Sr- and Nd-isotope compositions have been determined for Quaternary volcanic rocks from the Izu-Bonin intra-oceanic arc. ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios decrease away from the volcanic front of this arc and lie on mixing lines between the assumed isotopic compositions of fluid phases mainly derived from the basalt layer of the subducted lithosphere and upper-mantle materials in the sub-arc wedge. This across-arc variation can be explained through a simple sequence of processes involving initial release of fluid phases from the subducted oceanic crust to produce hydrous peridotite at the base of the mantle wedge. This hydrous peridotite is dragged downward with the slab and releases a second-stage metasomatizing fluid beneath the volcanic arc. The higher concentrations of both Sr and Nd in the fluid beneath the volcanic front than those beneath the back-arc side may be a possible cause of the observed across-arc variation in Sr-Nd isotopic ratios. The difference in compositions of fluid phases is attributed to the different hydrous phases which decompose in the hydrous peridotite layer; amphibole beneath the volcanic front and phlogopite beneath the back-arc side of the volcanic arc. The mineralogically controlled fluid addition may also be responsible for the across-arc variation in Rb/K and Rb/Zr ratios, increasing away from the volcanic front.     

Fukutoku-oka-no-ba Volcano: A new perspective on the Alkalic Volcano Province in the Izu–Bonin – Mariana arc

Pumice samples from Fukutoku-oka-no-ba in the Izu–Bonin – Mariana (IBM) arc were analysed for 40 trace elements and Sr, Nd, and Pb isotopic compositions. These samples are shoshonites (59.4–61.8 wt% SiO₂), characterized by high contents of K₂O (3.74–4.64 wt%), Ba (1274–1540 p.p.m.), Rb (91–105 p.p.m.), and light rare earth elements. The characteristics of alkali-element enrichment are similar to those of other parts of the Alkalic Volcano Province (AVP) in the northern Mariana and southernmost Volcano arcs. Sr (⁸⁷Sr/⁸⁶Sr = 0.7036–0.7038) and Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 19.08–19.11, ²⁰⁷Pb/²⁰⁴Pb = 15.62–15.63, ²⁰⁸Pb/²⁰⁴Pb = 38.85–38.91) of Fukutoku-oka-no-ba pumice are relatively radiogenic, whereas Nd is unradiogenic (¹⁴³Nd/¹⁴⁴Nd = 0.51283–0.51286). Fukutoku-oka-no-ba is isotopically distinct from Iwo Jima and is similar to the Hiyoshi Volcanic Complex, suggesting that Fukutoku-oka-no-ba might have a magma source similar to that of the Hiyoshi volcanic complex. Plots of Pb and Nd isotopes for AVP lavas trend toward the fields of ocean island basalt (OIB) source and pelagic sediments, which are possible sources of AVP enrichments.     

Implications from the seismic crustal structure of the northern Izu–Bonin arc

The results of a controlled source seismic reflection–refraction experiment carried out in 1992 reveal the following characteristics of the northern Izu–Bonin (Ogasawara) oceanic island arc–trench system. (1) The crust rapidly thickens from the Shikoku back-arc basin to the arc, is thickest beneath the active rifts, and then gradually thins to the forearc. The thickness of the crust beneath the arc rift zone and the back-arc basin are ∼ 20 km and 8 km, respectively. (2) The Moho vanishes beneath the forearc. Velocities rapidly decrease eastwards beneath the inner trench wall. (3) The velocity of the lower crust of the arc and the back-arc basin is 7.1–7.3 km/s. This velocity is higher than the typical oceanic lower crust whose velocity is ∼ 6.7 km/s. (4) The velocity of the middle crust of the arc is ∼ 6 km/s. This layer does not exist beneath the back-arc basin. (5) A slight difference in the velocity gradient of the middle crust exists between the arc rift zone and the forearc. Based on these findings and previous studies, it is inferred that: (i) the middle crust is probably granitic rock and formed in more than two episodes; (ii) the lower crust formed by igneous underplating which may also have affected part of the back-arc basin; and (iii) the root of the serpentinite diapir on the inner trench wall is a low-velocity mantle wedge that was probably caused by large amounts of water released from the subducting Pacific plate at depths shallower than 30 km.     

Late Cenozoic volcanic activity in the Chugoku area, southwest Japan arc during back-arc basin opening and reinitiation of subduction

Abstract Temporal–spatial variations in Late Cenozoic volcanic activity in the Chugoku area, southwest Japan, have been examined based on 108 newly obtained K–Ar ages. Lava samples were collected from eight Quaternary volcanic provinces (Daisen, Hiruzen, Yokota, Daikonjima, Sambe, Ooe–Takayama, Abu and Oki) and a Tertiary volcanic cluster (Kibi Province) to cover almost all geological units in the province. Including published age data, a total of 442 Cenozoic radiometric ages are now available. Across‐arc volcanic activity in an area approximately 500 km long and 150 km wide can be examined over 26 million years. The period corresponds to syn‐ and post‐back‐arc basin opening stages of the island arc. Volcanic activity began in the central part of the rear‐arc ca 26 Ma. This was followed by arc‐wide expansion at 20 Ma by eruption at two rear‐arc centers located at the eastern and western ends. Expansion to the fore‐arc occurred between 20 and 12 Ma. This Tertiary volcanic arc was maintained until 4 Ma with predominant alkali basalt centers. The foremost‐arc zone activity ceased at 4 Ma, followed by quiescence over the whole arc between 4 and 3 Ma. Volcanic activity resumed at 3 Ma, covering the entire rear‐arc area, and continued until the present to form a Quaternary volcanic arc. Adakitic dacite first occurred at 1.7 Ma in the middle of the arc, and spread out in the center part of the Quaternary volcanic arc. Alkali basalt activities ceased in the area where adakite volcanism occurred. Fore‐arc expansion of the volcanic arc could be related to the upwelling and expansion of the asthenosphere, which caused opening of the Japan Sea. Narrowing of the volcanic zone could have been caused by progressive Philippine Sea Plate subduction. Deeper penetration could have caused melting of the slab and resulted in adakites. Volcanic history in the Late Cenozoic was probably controlled by the history of evolution of the upper mantle structure, coinciding with back‐arc basin opening and subsequent reinitiation of subduction.     

The earliest stage of Izu rear‐arc volcanism revealed by drilling at Site U1437, International Ocean Discovery Program Expedition 350

The International Ocean Discovery Program Expedition 350 drilled between two Izu rear‐arc seamount chains at Site U1437 and recovered the first complete succession of rear‐arc rocks. The drilling reached 1806.5 m below seafloor. In situ hyaloclastites, which had erupted before the rear‐arc seamounts came into existence at this site, were recovered in the deepest part of the hole (～15–16 Ma). Here it is found that the composition of the oldest rocks recovered does not have rear‐arc seamount chain geochemical signatures, but instead shows affinities with volcanic front or some of the extensional zone basalts between the present volcanic front and the rear‐arc seamount chains. It is suggested that following the opening of the Shikoku back‐arc Basin, Site U1437 was a volcanic front or a rifting zone just behind the volcanic front, and was followed at ~ 9 Ma by the start of rear‐arc seamount chains volcanism. This geochemical change records variations in the subduction components with time, which might have followed eastward moving of hot fingers in the mantle wedge and deepening of the subducting slab below Site U1437 after the cessation of Shikoku back‐arc Basin opening.     

Fault configuration produced by initial arc rifting in the Parece Vela Basin as deduced from seismic reflection data

Abstract   The Parece Vela Basin (PVB), which is a currently inactive back-arc basin of the Philippine Sea Plate, was formed by separation between the Izu-Ogasawara Arc (IOA) and the Kyushu-Palau Ridge (KPR). Elucidating the marks of the past back-arc opening and rifting is important for investigation of its crustal structure. To image its fault configurations and crustal deformation, pre-stack depth migration to multichannel seismic reflection was applied and data obtained by the Japan Agency for Marine-Earth Science and Technology and Metal Mining Agency of Japan and Japan National Oil Corporation (Japan Oil, Gas and Metals National Corporation). Salient results for the pre-stack depth-migrated sections are: (i) deep reflectors exist around the eastern margin of KPR and at the western margin of IOA down to 8 km depth; and (ii) normal fault zones distributed at the eastern margin of the KPR (Fault zone A) and the western margin of the IOA (Fault zone B) have a total displacement of greater than 500 m associated with synrift sediments. Additional normal faults (Fault zone C) exist 20 km east of the Fault zone B. They are covered with sediment, which indicates deposition of recent volcanic products in the IOA. According to those results: (i) the fault displacement of more than 500 m with respect to initial rifting was approximately asymmetric at 25 Ma based on PSDM profiles; and (ii) the faults had reactivated after 23 Ma, based on the age of deformed sediments obtained from past ocean drillings. The age of the base sediments corresponds to those of spreading and rotation after rifting in the PVB. Fault zone C is covered with thick and not deformed volcanogenic sediments from the IOA, which suggests that the fault is inactive.     

Origin of the Kunlun Mountains by arc-arc and arc-continent collisions

Abstract The Kunlun Mountains were formed by early Mesozoic arc-arc and arc-continent collisions. The Middle Kunlun Are was the outer volcanic arc of the Paleozoic Asiatic continent, and the arc-related magmatic activities from the Proterozoic to Mesozoic are recorded by numerous volcanic and plutonic rocks of the area. Several back-arc basins and relic arcs exist north of the arc and the north Kunlun arc is one of these. The Kudi mélange of Kunlun was formed in a south-dipping subduction zone when the basin between the north and middle Kunlun arcs was consumed by the process of back-arc basin collapse, and the ophiolite mélange marked the suture zone where the two arcs collided. The Mazar mélange was formed in the north-dipping subduction zone under the middle Kunlun arc, and the mélange marks the main Paleotethys suture where the Qogir-Karamilan rocks of the Qangtang block (a fragment of Gondwanaland) is sutured on to Laurentia. The geology of Kunlun emphasizes the importance of arc-arc and arc-continent collisions in mountain-building processes.     

Mantle diapir-induced arc volcanism: The Ueno Basalts, Nomugi-Toge and Hida volcanic suites, central Japan

Stratigraphic and geochronological data show that the late Cenozoic Ueno Basalts and related Nomugi-Toge and Hida volcanic suites of the Norikura Volcanic Chain, Japan, were active for ~ 1 million years. Temporal and spatial variations of the volcanic activity and chemistry of the volcanic products suggest that it was induced by a common mantle diapir. The Ueno Basalts are small monogenetic volcanoes scattered over an area 50 km in diameter, and comprise a small volcanic province. The Ueno Basalts are almost all subalkalic basalt to basaltic andesite, erupted through the late Pliocene to the earliest Pleistocene (2.7–1.5 Ma). Andesite to dacite of the Nomugi-Toge volcanic rocks were concurrently active in the back arc side, and two eruption stages (2.6–2.2 and 2.1–1.7 Ma) are recognizable. Two voluminous dacite and rhyolite ignimbrites, the Hida Volcanic Rocks, were erupted deeper in the back-arc region, at ca 1.75 and 1.7 Ma. Both the Nomugi-Toge and Hida suites are also subalkalic, except for the last ignimbrite. In the Ueno Basalts, alkali olivine basalt was erupted in the earliest stage, and was followed by subalkalic basalt, showing that the magma segregation depth ascended with time. This coincided with uplift of the volcanic province and with quasi-concentric expansion of the eruption centers, suggesting that an upwelling mantle diapir was the cause of the volcanism. The Nomugi-Toge andesite–dacite lavas and the Hida dacite and rhyolite ignimbrites are considered to have originated from the same mantle diapir, because of their close proximity to the Ueno Basalts and their near-contemporaneous activity. Mantle diapirs have a significant role in the origin of subalkalic volcanic rocks in the island arcs.     

Petrogenesis of the Tanzawa plutonic complex, central Japan: Exposed felsic middle crust of the Izu–Bonin – Mariana arc

The Miocene Tanzawa plutonic complex, consisting mainly of tonalite intrusions, is exposed at the northern end of the Izu–Bonin – Mariana (IBM) arc system as a consequence of collision with the Honshu Arc. The Tanzawa plutonic rocks belong to the calc-alkaline series and exhibit a wide range of chemical variation, from 43 to 75 wt% SiO₂. They are characterized by relatively high Ba/Rb and Ce/Nb ratios, and low abundances of K₂O, LIL elements, and rare earth elements (REE). Their petrographic and geochemical features indicate derivation from an intermediate parental magma through crystal fractionation and accumulation processes, involving hornblende, plagioclase, and magnetite. The Tanzawa plutonic complex is interpreted to be the exposed middle crust of the IBM arc, which was uplifted during the collision. The mass balance calculations, combining data from melting experiments of hydrous basaltic compositions at lower-to-middle crustal levels, suggest that parental magma and ultramafic restite were generated by dehydration partial melting (∼ 45% melting) of amphibolite chemically similar to low-K tholeiitic basalt. Partial melting of hydrated mafic lower crust might play an important role in felsic middle-crust formation in the IBM arc.     

Melting experiments on hydrous low-K tholeiite: Implications for the genesis of tonalitic crust in the Izu–Bonin – Mariana arc

A series of water-deficient partial melting experiments on a low-K tholeiite were carried out under lower crustal P–T–H₂O conditions (900–1200 °C, 0.7–1.5 GPa, 2 and 5 wt% H₂O added) using a piston-cylinder apparatus. With increasing temperature at 1.0 GPa, supersolidus mineral assemblages vary from amphibolitic to pyroxenitic. Garnet crystallizes in the higher pressure runs (> 1.2 GPa). Melt compositions show low-K calc-alkalic trends, and are classified as metaluminous or peraluminous tonalite. These features are similar to the felsic rocks in the Izu–Bonin – Mariana (IBM) arc, for example Tanzawa plutonic rocks. The anatectic origin of Tanzawa tonalites is consistent with geochemical modeling, which demonstrates that the rare earth element (REE) characteristics of Tanzawa plutonic rocks (which represent the middle crust of the IBM arc) can be generated by partial melting of amphibolite in the lower crust (∼ 50% melting at 1050 °C and below 1.2 GPa). Estimated densities of pyroxenitic restites (∼ 3.9 g/cm³) after extraction of andesitic melts are higher than that of mantle peridotite beneath the island arc (3.3 g/cm³). The high density of the restite could cause delamination of the IBM arc lower crust. Rhyolitic magmas in the IBM arc (e.g. Niijima) could be formed by low degrees of partial melting of the amphibolitic crust at a temperature just above the solidus (10% melting at or below 900 °C).     

Temporal evolution of the Mariana arc during rifting of the Mariana Trough traced through the volcaniclastic record

The sedimentary sequences that accumulate around volcanic arcs may be used to reconstruct the history of volcanism provided the degree of along-margin sediment transport is modest, and that reworking of old sedimentary or volcanic sequences does not contribute substantially to the sediment record. In the Mariana arc, the rare earth and trace element compositions of ash layers sampled by Deep Sea Drilling Project (DSDP) site 451 on the West Mariana Ridge, and sites 458 and 459 on the Mariana Forearc, were used to reconstruct the evolution of the arc volcanic front during rifting of the Mariana Trough. Ion microprobe analysis of individual glass shards from the sediments shows that the glasses have slightly light rare earth element (LREE)-enriched compositions, and trace element compositions typical of arc tholeiites. The B/Be ratio is a measure of the involvement of subducted sediment in petrogenesis, and is unaffected by fractional crystallization. This ratio is variable over the period of rifting, increasing up-section at site 451 and reaching a maximum in sediments dated at 3–4 Ma, ∼ 3–4 million years after rifting began. This may reflect increased sediment subduction during early rifting and roll-back of the Pacific lithosphere. Parallel trends are not seen in the enrichment of incompatible high field strength (HFSE), large ion lithophile (LILE) or rare earth elements (REE), suggesting that flux from the subducting slab alone does not control the degree of melting. Re-establishment of arc volcanism on the trench side of the basin at ca 3 Ma resulted in volcanism with relative enrichment in incompatible REE, HFSE and LILE, although these became more depleted with time, possibly due to melt extraction from the mantle source as it passed under the developing back-arc spreading axis, prior to melting under the volcanic front.