Molecular and isotopic compositions of bitumens in Silurian tar sands from the Tarim Basin,NW China: Characterizing biodegradation and hydrocarbon charging in an old composite basin

Biodegradation and oil mixing in Silurian sandstone reservoirs of the Tarim Basin, one of the largest composite basins in China, were investigated by analyzing the molecular characteristics and stable carbon isotopic signatures of low-molecular-weight (LMW) saturated hydrocarbons and high-molecular-weight (HMW) asphaltenes. Detection of 25-norhopanes and 17-nortricyclic terpanes in most Silurian tar sands from the Tabei Uplift in the Tarim Basin suggests a much greater degree of biodegradation here than in the Tazhong Uplift. This explains the relatively more abundant tricyclic terpanes, gammacerane, pregnane and diasteranes in tar sands from the Tabei Uplift than in those from the Tazhong Uplift. Hence, care must be taken when assigning oil source correlations using biomarkers in tar sands because of the biodegradation and mixing of oils derived from multiple sources in such an old composite basin. Asphaltenes in the tar sands seem to be part of the oil charge before biodegradation, depending on the relative anti-biodegradation characteristics of asphaltenes, the similarity in carbon isotopic signatures for asphaltenes and their pyrolysates, and the consistent product distribution for flash pyrolysis and for regular steranes in asphaltene pyrolysates, regardless of whether the tar sands were charged with fresh oil. According to the relative distributions of regular steranes and the relatively abundant 1,2,3,4-tetramethylbenzene significantly enriched in ¹³C, the oil sources for asphaltenes in the tar sands might be related to lower Paleozoic marine source rocks formed in euxinic conditions. Nevertheless, the relatively low abundance of gammacerane and C₂₈ regular steranes observed in asphaltene pyrolysates and residual hydrocarbons, within limited samples investigated in this work, made a direct correlation of oils originally charged into Silurian tar sands with those Cambrian source rocks, reported so far, seem not to be possible. Comparison of carbon isotopic signatures of n-alkanes in asphaltene pyrolysates with those of LMW saturated hydrocarbons is helpful in determining if the abundant n-alkanes in tar sands are derived from fresh oil charges after biodegradation. The limited carbon isotopic data for n-alkanes in LMW saturated hydrocarbons from the tar sands can be used to classify oils charged after biodegradation in the composite basin into four distinct groups.     

Hydrocarbon migration and accumulation of the Suqiao buried-hill zone in Wen'an Slope,Jizhong Subbasin,Bohai Bay Basin,China

The hydrocarbon migration and accumulation of the Suqiao deep buried-hill zone, in the Jizhong Subbasin, the Bohai Bay Basin, eastern China, was investigated from the perspective of paleo-fluid evidence by using fluid inclusions, quantitative fluorescence techniques (QGF), total scanning fluorescence method (TSF) and organic geochemical analysis. Results show that the current condensate oil-gas reservoirs in the study area once were paleo-oil reservoirs. In addition, the reservoirs have experienced at least two stages of hydrocarbon charge from different sources and/or maturities. During the deposition of the Oligocene Dongying Formation (Ed), the deep Ordovician reservoirs were first charged by mature oils sourced from the lacustrine shale source rocks in the fourth member of Shahejie and Kongdian Formations (Es₄+Ek), and then adjusted at the end of Ed period subsequently by virtue of the tectonic movement. Since the deposition of the Neogene Minghuazhen Formation (Nm), the reservoirs were mainly charged by the gas that consisted of moderate to high-maturity condensate and wet gas sourced from the Es₄+Ek lacustrine shale source rocks and mature coal-derived gas sourced from the Carboniferous-Permian (C-P) coal-bearing source rocks. Meanwhile, the early charged oil was subjected to gas flushing and deasphalting by the late intrusion of gas. The widely distributed hydrocarbon inclusions, the higher QGF Index, and FOI (the frequency of oil inclusions) values in both gas-oil and water zone, are indicative of early oil charge. In addition, combined with the homogenization temperatures of the fluid inclusions (<160 °C) and the existence of solid-bitumen bearing inclusions, significant loss of the n-alkanes with low carbon numbers, enrichments of heavier components in crude oils, and the precipitation of asphaltene in the residual pores suggest that gas flushing may have played an important role in the reservoir formation.     

Identification of polycyclic sulfides hexahydrodibenzothiophenes and their implications for heavy oil accumulation in ultra-deep strata in Tarim Basin

Heavy oil accumulation in deep Ordovician carbonate stratum was discovered at present burial depths greater than 6600 m in the northern Tarim Basin, NW China. Density of the unusual ultra-deep heavy oils is greater than 0.92 g/cm³ at 20 °C. Crude oil produced from 6598 to 6710 m interval of the Ha9 well was selected for the thiophenic and sulfidic compounds characterization in order to understand the mechanism of heavy oil accumulation in the ultra-deep strata. In addition to the common thiophenic compounds, four homologues of novel polycyclic sulfides named as 1,1,4a,6-tetramethyl-9-alkyl-1,2,3,4,4a,9b-hexahydrodibenzothiophenes (H₆DBTs, 9-alkyl = H, methyl, ethyl, and propyl, respectively) were identified in Ha9 well crude oil, and it is the first time these biomarkers were detected in natural occurrence. H₆DBTs were generated from isoprenoid-related precursors reacted with reduced-state sulfur in early diagenesis stage by bacterial sulfate reduction. The occurrence of H₆DBTs further indicated biodegradation of the reservoir oil at a relatively mild temperature (60–65 °C), a favorable condition for microorganism survival. According to the history of reservoir forming, oil and gas accumulation occurred in reservoirs during the Late Permian period and then being uplifted, suffering biodegradation. Oil quality was significantly altered as a result of strong biodegradation since the Triassic. Heavy oil reservoir was buried deeper around. 5 Ma, leading to a rapid increase in reservoir temperature up to 150 °C at a burial depth of 6600 m. The quick burial and elevated temperature of the reservoir were favorable to the preservation of H₆DBTs.     

Petrological and geochemical constraints on diagenesis and deep burial dissolution of the Ordovician carbonate reservoirs in the Tazhong area,Tarim Basin,NW China

Deeply buried (4500–7000 m) Ordovician carbonate reservoirs in the Tazhong area, Tarim Basin, NW China show obvious heterogeneity with porosity from null in limestones and sweet dolostones to 27.8% in sour dolostones, from which economically important oils, sour gas and condensates are currently being produced. Petrographic features, C, O, Sr isotopes were determined, and fluid inclusions were analyzed on diagenetic calcite, dolomite and barite from Ordovician reservoirs to understand controls on the porosity distribution. Ordovician carbonate reservoirs in the Tazhong area are controlled mainly by initial sedimentary environments and eo-genetic and near-surface diagenetic processes. However, vugs and pores generated from eogenetic and telogenetic meteoric dissolution were observed to have partially been destroyed due to subsequent compaction, filling and cementation. In some locations or wells (especially ZG5-ZG7 Oilfield nearby ZG5 Fault), burial diagenesis (e.g. thermochemical sulfate reduction, TSR) probably played an important role in quality improvement towards high-quality reservoirs. C2 calcite and dolomite cements and barite have fluid inclusions homogenization temperatures (Ths) from 86 to 113 °C, from 96 to 128 °C and from 128 to 151 °C, respectively. We observed petrographically corroded edges of these high-temperature minerals with oil inclusions, indicating the dissolution must have occurred under deep-burial conditions. The occurrence of TSR within Ordovician carbonate reservoirs is supported by C3 calcite replacement of barite, and the association of sulfur species including pyrite, anhydrite or barite and elemental sulfur with hydrocarbon and ¹²C-rich (as low as −7.2‰ V-PDB) C3 calcite with elevated Ths (135–153 °C). The TSR may have induced burial dissolution of dolomite and thus probably improved porosity of the sour dolostones reservoirs at least in some locations. In contrast, no significant burial dissolution occurred in limestone reservoirs and non-TSR dolostone reservoirs. The deeply buried sour dolostone reservoirs may therefore be potential exploration targets in Tarim Basin or elsewhere in the world.     

轮南地区压力场演化及其成藏意义

选择轮南主体区剖面七条和临近凹陷剖面两条,利用压力数值模拟手段,对轮南地区的压力场演化进行了恢复和模拟。结合实测压力资料和钻井资料,发现部分地区石炭系和上奥陶统中存在弱超压、寒武系在凹陷内存在超压。通过分析,石炭系超压在轮南主体区主要是水热增压作用和泥岩转换作用造成的,在凹陷内则可能主要由于欠压实引起。上奥陶统内部的超压和石炭系在形成时间、特征和发育机理上相似,不过轮南地区上奥陶统覆盖区域较少。寒武系超压和三个成藏期相对应,在凹陷内形成明显的三期超压现象,以喜山期超压幅度最大。整体上看,石炭系和上奥陶统弱超压,对成藏动力方面贡献不大,但是超压的形成增强了该层的封闭性,对喜山期天然气成藏有重要影响。寒武系超压为油气初次运移提供了动力,但是超压幅度有限,推测其在油气二次运移过程中贡献不大。     

Charging of oil fields surrounding the Shaleitian uplift from multiple source rock intervals and generative kitchens,Bohai Bay basin,China

This paper discusses origin and charging directions of oil fields on the Shaleitian Uplift, Bohai Bay basin. The Shaleitian Uplift is a footwall uplift surrounded by three sags containing mature source rocks. The origins of the four oil fields on the Shaleitian Uplift, both in terms of source rock intervals and in terms of generative kitchens, were studied using biomarker distributions for 61 source rock samples and 27 oil samples. Hierarchical cluster analysis using 12 parameters known to be effective indicators of organic matter input and/or depositional conditions allowed the identification of six oil types or classes. These six oil classes could then be linked to three distinct source rock intervals ranging in age from 43.0 Ma to 30.3 Ma. The third member (43.0–38.0 Ma in age) and first member (35.8–32.8 Ma) of the Eocene Shahejie Formation, and the third member of the Oligocene Dongying Formation (32.8–30.3 Ma) each sourced one class of oil. The other three classes represent mixtures of oil generated from multiple source rock intervals. Traps on the Shaleitian Uplift were charged in the east by oil generated from the Eocene Shahejie Formation in the Bozhong Sag, in the southeast by oil generated from the Eocene Shahejie and then Oligocene Dongying formations in the southwestern part of the Bozhong Sag and/or in the eastern part of the Shanan Sag, and in the southwest by oil generated from the Eocene Shahejie Formation in the western part of the Shanan Sag. The estimated migration distances range from less than 5 km to about 20 km. The compositional heterogeneity within fields and multiple-parameter comparisons between oils from nearby wells in different fields have proven to be a powerful tool to determine the in-filling histories of oil fields in cases where multiple source rock intervals and multiple generative kitchens exist.     

Geochemistry and charge history of oils from the Yuqi area of Tarim Basin,NW China

The geochemistry, origin and charge history of oils from the Yuqi area of Tarim Basin have been investigated, through GC, GC-MS and fluid inclusion microthermometry analysis. The Yuqi oils accumulated mainly in three intervals: (1) in the Lower-Middle Ordovician Yingshan Formation (O_1-2y) carbonate reservoirs; (2) in the overlying Upper Triassic Halahatang Formation (T₃h); and (3) in the Lower Cretaceous Yageliemu Formation (K₁y) sandstones. Oils from different reservoirs have distinct physical properties, varying from extra-heavy (O_1-2y), heavy (T₃h), to light oils (T₃h and K₁y). However, their geochemical compositions show a high degree of similarity, which indicates that they derive from the same source rock. Abundant tricyclic terpanes, gammacerane, dibenzothiophene and C₂₁C₂₂steranes, together with a low level of diasteranes, indicate an anoxic marine source rock for oils in the Yuqi area. Oil-oil correlation shows that Yuqi oils derive from the same source bed as Tahe oils. The co-occurrence of intact n-alkanes and 25-norhopanes in all the samples supports the proposition that there is a mixture of an early filled severely biodegraded oil and a late filled fresh oil.In this study, charge history is examined on the basis of integration of fluid inclusion homogenization temperature data with 1D burial-thermal history models. Two episodes of oil charging are identified in the O_1-2y reservoir (well YQX1-1) at around 436-420 Ma (Middle-Late Silurian) and 10-3 Ma (Miocene to Pliocene), respectively. For the samples from the T₃h and K₁y intervals, only one episode of oil charge is indicated by the homogenization temperatures of coexisting aqueous inclusions with an inferred timing around 10-3 Ma. The T₃h heavy oil reservoir is assumed to be a secondary hydrocarbon pool, which accumulated by re-migration and re-distribution of hydrocarbons from O_1-2y hydrocarbon pools. The few early biodegraded oils in the K₁y light oils were probably picked up along the migration pathway during the late fresh oil charging.     

Oil-oil and oil-source rock correlations in the Alpine Foreland Basin of Austria: Insights from biomarker and stable carbon isotope studies

The Alpine Foreland Basin is a minor oil and moderate gas province in central Europe. In the Austrian part of the Alpine Foreland Basin, oil and minor thermal gas are thought to be predominantly sourced from Lower Oligocene horizons (Schöneck and Eggerding formations). The source rocks are immature where the oil fields are located and enter the oil window at ca. 4 km depth beneath the Alpine nappes indicating long-distance lateral migration. Most important reservoirs are Upper Cretaceous and Eocene basal sandstones.Stable carbon isotope and biomarker ratios of oils from different reservoirs indicate compositional trends in W-E direction which reflect differences in source, depositional environment (facies), and maturity of potential source rocks. Thermal maturity parameters from oils of different fields are only in the western part consistent with northward displacement of immature oils by subsequently generated oils. In the eastern part of the basin different migration pathways must be assumed. The trend in S/(S + R) isomerisation of ααα-C₂₉ steranes versus the αββ (20R)/ααα (20R) C₂₉ steranes ratio from oil samples can be explained by differences in thermal maturation without involving long-distance migration. The results argue for hydrocarbon migration through highly permeable carrier beds or open faults rather than relatively short migration distances from the source. The lateral distance of oil fields to the position of mature source rocks beneath the Alpine nappes in the south suggests minimum migration distances between less than 20 km and more than 50 km.Biomarker compositions of the oils suggest Oligocene shaly to marly successions (i.e. Schoeneck, Dynow, and Eggerding formations) as potential source rocks, taking into account their immature character. Best matches are obtained between the oils and units a/b (marly shale) and c (black shale) of the “normal” Schöneck Formation, as well as with the so-called “Oberhofen Facies”. Results from open system pyrolysis-gas chromatography of potential source rocks indicate slightly higher sulphur content of the resulting pyrolysate from unit b. The enhanced dibenzothiophene/phenanthrene ratios of oils from the western part of the basin would be consistent with a higher contribution of unit b to hydrocarbon expulsion in this area. Differences in the relative contribution of sedimentary units to oil generation are inherited from thickness variations of respective units in the overthrusted sediments. The observed trend towards lighter δ¹³C values of hydrocarbon fractions from oil fields in a W-E direction are consistent with lower δ¹³C values of organic matter in unit c.     

Timing and mechanism of reservoir forming in the Upper Triassic Halahatang Formation,Yuqi block,Tarim Basin,northwestern China

The Yuqi block is an important area for oil and gas exploration in the northern Akekule uplift, Tarim Basin, northwestern China. The Upper Triassic Halahatang Formation (T₃h) within the Yuqi block can be subdivided into a lowstand system tract (LST), a transgressive system tract (TST), and a highstand system tract (HST), based on a study of initial and maximum flood surfaces. Oil in the lowstand system tract of the Halahatang Formation is characterized by medium to lightweight (0.8075 g/cm³–0.9258 g/cm³), low sulfur content (0.41%–1.4%), and high paraffin content (9.65%–10.25%). The distribution of oil and gas is principally controlled by low-amplitude anticlines and faults. Based on studies of fluorescence thin sections and homogenization temperatures of fluid inclusions, reservoirs in the T₃h were formed in at least two stages of hydrocarbon charge and accumulation. During the first stage (Jurassic–Cretaceous) both the structural traps and hydrocarbon reservoirs were initiated; during the second stage (Cenozoic) the structural traps were finally formed and the reservoirs were structurally modified. The reservoir-forming mechanism involved external hydrocarbon sources (i.e. younger reservoirs with oil and gas sourced from old rocks), two directions (vertical and lateral) of expulsion, and multi-stage accumulation. This model provides a theoretical fundament for future oil and gas exploration in the Tarim Basin and other similar basins in northwestern China.     

Source rock characteristics and hydrocarbon generation modelling of Upper Cretaceous Mukalla Formation in the Jiza-Qamar Basin,Eastern Yemen

The Upper Cretaceous Mukalla coals and other organic-rich sediments which are widely exposed in the Jiza-Qamar Basin and believed to be a major source rocks, were analysed using organic geochemistry and petrology. The total organic carbon (TOC) contents of the Mukalla source rocks range from 0.72 to 79.90% with an average TOC value of 21.50%. The coals and coaly shale sediments are relatively higher in organic richness, consistent with source rocks generative potential. The samples analysed have vitrinite reflectance in the range of 0.84–1.10 %Ro and pyrolysis T_max in the range of 432–454 °C indicate that the Mukalla source rocks contain mature to late mature organic matter. Good oil-generating potential is anticipated from the coals and coaly shale sediments with high hydrogen indices (250–449 mg HC/g TOC). This is supported by their significant amounts of oil-liptinite macerals are present in these coals and coaly shale sediments and Py-GC (S₂) pyrograms with n-alkane/alkene doublets extending beyond nC₃₀. The shales are dominated by Type III kerogen (HI < 200 mg HC/g TOC), and are thus considered to be gas-prone.One-dimensional basin modelling was performed to analysis the hydrocarbon generation and expulsion history of the Mukalla source rocks in the Jiza-Qamar Basin based on the reconstruction of the burial/thermal maturity histories in order to improve our understanding of the of hydrocarbon generation potential of the Mukalla source rocks. Calibration of the model with measured vitrinite reflectance (Ro) and borehole temperature data indicates that the present-day heat flow in the Jiza-Qamar Basin varies from 45.0 mW/m² to 70.0 mW/m² and the paleo-heat flow increased from 80 Ma to 25 Ma, reached a peak heat-flow values of approximately 70.0 mW/m² at 25 Ma and then decreased exponentially from 25 Ma to present-day. The peak paleo-heat flow is explained by the Gulf of Aden and Red Sea Tertiary rifting during Oligocene-Middle Miocene, which has a considerable influence on the thermal maturity of the Mukalla source rocks. The source rocks of the Mukalla Formation are presently in a stage of oil and condensate generation with maturity from 0.50% to 1.10% Ro. Oil generation (0.5% Ro) in the Mukalla source rocks began from about 61 Ma to 54 Ma and the peak hydrocarbon generation (1.0% Ro) occurred approximately from 25 Ma to 20 Ma. The modelled hydrocarbon expulsion evolution suggested that the timing of hydrocarbon expulsion from the Mukalla source rocks began from 15 Ma to present-day.     

Petroleum accumulation in the deeply buried reservoirs in the northern Dongying Depression,Bohai Bay Basin,China: New insights from fluid inclusions,natural gas geochemistry,and 1-D basin modeling

The deeply buried reservoirs (DBRs) from the Lijin, Shengtuo and Minfeng areas in the northern Dongying Depression of the Bohai Bay Basin, China exhibit various petroleum types (black oil-gas condensates) and pressure systems (normal pressure-overpressure) with high reservoir temperatures (154–185 °C). The pressure-volume-temperature-composition (PVTX) evolution of petroleum and the processes of petroleum accumulation were reconstructed using integrated data from fluid inclusions, stable carbon isotope data of natural gas and one-dimensional basin modeling to trace the petroleum accumulation histories.The results suggest that (1) the gas condensates in the Lijin area originated from the thermal cracking of highly mature kerogen in deeper formations. Two episodes of gas condensate charging, which were evidenced by the trapping of non-fluorescent gas condensate inclusions, occurred between 29-25.5 Ma and 8.6–5.0 Ma with strong overpressure (pressure coefficient, P_c = 1.68–1.70), resulting in the greatest contribution to the present-day gas condensate accumulation; (2) the early yellow fluorescent oil charge was responsible for the present-day black oil accumulation in well T764, while the late blue-white oil charge together with the latest kerogen cracked gas injection resulted in the present-day volatile oil accumulation in well T765; and (3) the various fluorescent colors (yellow, blue-white and blue) and the degree of bubble filling (F_v) (2.3–72.5%) of the oil inclusions in the Minfeng area show a wide range of thermal maturity (API gravity ranges from 30 to 50°), representing the charging of black oil to gas condensates. The presence of abundant blue-white fluorescent oil inclusions with high Grain-obtaining Oil Inclusion (GOI) values (35.8%, usually >5% in oil reservoirs) indicate that a paleo-oil accumulation with an approximate API gravity of 39–40° could have occurred before 25 Ma, and gas from oil cracking in deeper formations was injected into the paleo-oil reservoir from 2.8 Ma to 0 Ma, resulting in the present-day gas condensate oil accumulation. This oil and gas accumulation model results in three oil and gas distribution zones: 1) normal oil reservoirs at relatively shallow depth; 2) gas condensate reservoirs that originated from the mixture of oil cracking gas with a paleo-oil reservoir at intermediate depth; and 3) oil-cracked gas reservoirs at deeper depth.The retardation of organic matter maturation and oil cracking by high overpressure could have played an important role in the distribution of different origins of gas condensate accumulations in the Lijin and Minfeng areas. The application of oil and gas accumulation models in this study is not limited to the Dongying Depression and can be applied to other overpressured rift basins.     

Organic geochemistry of the Silurian Tanezzuft Formation and crude oils,NC115 Concession,Murzuq Basin,southwest Libya

Thirty-six Silurian core and cuttings samples and 10 crude oil samples from Ordovician reservoirs in the NC115 Concession, Murzuq Basin, southwest Libya were studied by organic geochemical methods to determine source rock organic facies, conditions of deposition, thermal maturity and genetic relationships. The Lower Silurian Hot Shale at the base of the Tanezzuft Formation is a high-quality oil/gas-prone source rock that is currently within the early oil maturity window. The overall average TOC content of the Hot Shale is 7.2 wt% with a maximum recorded value of 20.9 wt%. By contrast, the overlying deposits of the Tanezzuft Formation have an average TOC of 0.6 wt% and a maximum value of 1.1 wt%. The organic matter in the Hot Shale consists predominantly of mixed algal and terrigenous Type-II/III kerogen, whereas the rest of the formation is dominated by terrigenous Type-III organic matter with some Type II/III kerogen. Oils from the A-, B- and H-oil fields in the NC115 Concession were almost certainly derived from marine shale source rocks that contained mixed algal and terrigenous organic input reflecting deposition under suboxic to anoxic conditions. The oils are light and sweet, and despite being similar, were almost certainly derived from different facies and maturation levels within mature source rocks. The B-oils were generated from slightly less mature source rocks than the others. Based on hierarchical cluster analysis (HCA), principal component analysis (PCA), selected source-related biomarkers and stable carbon isotope ratios, the NC115 oils can be divided into two genetic families: Family-I oils from Ordovician Mamuniyat reservoirs were probably derived from older Palaeozoic source rocks, whereas Family-II oils from Ordovician Mamuniyat–Hawaz reservoirs were probably charged from a younger Palaeozoic source of relatively high maturity. A third family appears to be a mixture of the two, but is most similar to Family-II oils. These oil families were derived from one proven mature source rock, the Early Silurian, Rhuddanian Hot Shale. There is a good correlation between the Family-II and -III oils and the Hot Shale based on carbon isotope compositions. Saturated and aromatic maturity parameters indicate that these oils were generated from a source rock of considerably higher maturity than the examined rock samples. The results imply that the oils originated from more mature source rocks outside the NC115 Concession and migrated to their current positions after generation.     

Hydrocarbon charging and accumulation history in the Niudong Buried Hill Field in the Baxian Depression,eastern China

The Niudong Buried Hill Field, which lies in the Baxian Depression of the Bohai Bay Basin, is the deepest oil/gas accumulation in eastern China. Its Precambrian dolomite reservoir occurs at burial depths of 5860 m–6027 m. This paper attempts to document the hydrocarbon charging and accumulation history in this field, which could greatly enhance the understanding of the mechanisms for the formation of deep hydrocarbon accumulations. Our previous study of oil trapped in fluid inclusions has demonstrated that the ratio parameters of the fluorescence spectral intensities at 425 nm and 433 nm (Q_425/433 ratio), and at 419 nm and 429 nm (Q_419/429 ratio) can be more effective for revealing hydrocarbon charging history than the previously-used fluorescence parameters such as Lambda max and red/green quotient as well as fluorescence colors. The hydrocarbon charging and accumulation history in the Niudong Buried Hill Field was studied with an integrated approach involving the application of these two spectral parameters of petroleum inclusion fluorescence as well as utilization of other data including homogenization temperatures of aqueous inclusions coeval with petroleum inclusions, and cross-cutting relationships of cements and “oil veins” in pores and fractures. The results indicate that the dolomite reservoir in the Niudong Buried Hill Field experienced three episodes of hydrocarbon charging. In the first two episodes (between 38.5Ma and 25Ma), the low mature and mature oils, which were derived from source rocks in the Sha-4 Member of the Eocene Shahejie Formation, migrated into the reservoir, but part of them leaked out due to normal faulting at the updip margin of the buried hill. These early-charged oils were preserved mainly in small pores in micritic dolomites by oil-wettability and capillary pressure. In the Neogene, the basin subsided as a whole and local faults at the updip margin became inactive and played a sealing role. By approximately 13Ma, the source rocks became highly mature and the generated hydrocarbons then migrated into the reservoir and accumulated. Therefore, the last charging is the most important for hydrocarbon accumulation in the Niudong Buried Hill Field.     

Variation of Icelandic and Hawaiian magmatism: evidence for co-pulsation of mantle plumes?

Based on published estimates of areal extent, thickness and dating of igneous rocks related to formation of the North Atlantic Volcanic Province, we calculate the magmatic production since the first reported magmatism at 70 Ma until present. We relate the magmatism to the Icelandic Plume and estimate the total volumetric production to 22.1 × 10⁶ km³. The magmatic production varied significantly with time, with a clear maximum of 55.5 m³/s around continental break-up at ca. 54 Ma. The lowest production is estimated at 4 m³/s, increasing to 7 m³/s at ca. 23 Ma. Two other pulses with increased activity are found around 40 Ma and in the late Miocene (10–5 Ma). The variations in productivity are consistent with a plume pulsing with a periodicity of ca. 15 million years. The same periodicity and relative timing is found for the Hawaiian Plume. If confirmed, these observations suggest that both plumes originate within the thin boundary layer near the Core-Mantle Boundary. This hypothesis may imply periodic heating of the earth’s core with subsequent heat-release to the mantle and increased global plume activity.     

Oil migration through preferential petroleum migration pathway (PPMP) and polycyclic faults: A case study from the Shijiutuo Uplift,Bohai Bay basin,China

The Shijiutuo uplift is an oil enriched uplift in the offshore Bohai Bay Basin. Petroleum migration is a key factor for oil enrichment in Neogene reservoirs far away from the hydrocarbon kitchen. In this article, an integration of geological, geophysical and geochemical analyses are employed to investigate the petroleum migration and accumulation on the Shijiutuo uplift. Hydrocarbons in the QHD32-6 and QHD33 oilfields are mainly originated from the third (E₂s₃) and first (E₂s₁) member of the Shahejie Formation. The shallow traps have significant contributions of late-stage E₂s₁-derived oil. Lateral petroleum migration is a major mechanism forming large oilfields on the Shijiutuo uplift. The large oilfields have multiple hydrocarbon kitchens, multiple source rocks, and numerous preferential petroleum migration pathways (PPMPs). Once petroleum arrives at the structural highs on the Shijiutuo uplift through the Guantao Formation (N₁g) carrier-beds, neotectonic faults cutting through Guantao (N₁g) and Minghuazhen (N₁m^L) formations could serve as effective conduits for vertical petroleum migration. Neotectonic faults have experienced polycyclic fault activities. Fluid inclusions indicate episodic hydrocarbon charging. Crude oils display duplex properties of biodegradation and non-biodegradation, which is strong evidence for multiple and episodic oil charging on the Shijiutuo uplift. Finally, episodic petroleum charging along polycyclic neotectonic faults causes the late-stage E₂s₁-derived oils to occur in the shallow reservoirs.     

Petroleum generation and charge history of the northern Dongying Depression,Bohai Bay Basin,China: Insight from integrated fluid inclusion analysis and basin modelling

The petroleum generation and charge history of the northern Dongying Depression, Bohai Bay Basin was investigated using an integrated fluid inclusion analysis workflow and geohistory modelling. One and two-dimensional basin modelling was performed to unravel the oil generation history of the Eocene Shahejie Formation (Es3 and Es4) source rocks based on the reconstruction of the burial, thermal and maturity history. Calibration of the model with thermal maturity and borehole temperature data using a rift basin heat flow model indicates that the upper interval of the Es4 source rocks began to generate oil at around 35 Ma, reached a maturity level of 0.7% R_o at 31–30 Ma and a peak hydrocarbon generation at 24–23 Ma. The lower interval of the Es3 source rocks began to generate oil at around 33–32 Ma and reached a maturity of 0.7% R_o at about 27–26 Ma. Oil generation from the lower Es3 and upper Es4 source rocks occurred in three phases with the first phase from approximately 30–20 Ma; the second phase from approximately 20–5 Ma; and the third phase from 5 Ma to the present day. The first and third phases were the two predominant phases of intense oil generation.Samples from the Es3 and Es4 reservoir intervals in 12 wells at depth intervals between 2677.7 m and 4323.0 m were investigated using an integrated fluid inclusion workflow including petrography, fluorescence spectroscopy and microthermometry to determine the petroleum charge history in the northern Dongying Depression. Abundant oil inclusions with a range of fluorescence colours from near yellow to near blue were observed and were interpreted to represent two episodes of hydrocarbon charge based on the fluid inclusion petrography, fluorescence spectroscopy and microthermometry data. Two episodes of oil charge were determined at 24–20 Ma and 4–3 Ma, respectively with the second episode being the predominant period for the oil accumulation in the northern Dongying Depression. The oil charge occurred during or immediately after the modelled intense oil generation and coincided with a regional uplift and a rapid subsidence, suggesting that the hydrocarbon migration from the already overpressured source rocks may have been triggered by the regional uplift and rapid subsidence. The expelled oil was then charged to the already established traps in the northern Dongying Depression. The proximal locations of the reservoirs to the generative kitchens and the short oil migration distance facilitate the intimate relationship between oil generation, migration and accumulation.     

A comparative study between present and palaeo-heat flow in the Qiangtang Basin,northern Tibet,China

The Qiangtang Basin is a significant prospective area for hydrocarbon and gas hydrate resources in the Tibetan Plateau, China. However, relatively little work has been performed to characterise heat flow in this basin, which has restricted petroleum and gas hydrate exploration. In this study, we compare present and palaeo-heat flow in the Qiangtang Basin to provide information on geothermal regime, hydrocarbon generation and permafrost that is necessary for further petroleum and gas hydrate exploration. We base our study on temperature data from a thermometer well, thermal conductivity tests, vitrinite reflectance data, homogenisation temperature data from fluid inclusions, stratigraphic information and a time-independent modelling approach. Our results indicate that in the central Qiangtang Basin, the present thermal gradient is approximately 15.5 °C/km, and heat flow is approximately 46.69 mW/m². Heat flow in the Qiangtang Basin is not relatively stable since the Early Jurassic, as previous research has suggested, and it is generally decreasing with time. Additionally, there is a clear difference between the hottest thermal regime of the southern and northern Qiangtang Depressions during Cretaceous to Pleistocene time. In the southern Qiangtang Depression, the palaeogeothermal gradient is approximately 32.0 °C/km, and palaeo-heat flow is approximately 70 mW/m². However, in the northern Qiangtang Depression, the palaeogeothermal gradient exceeds 81.8 °C/km, and palaeo-heat flow is greater than 172.09 mW/m². The high thermal regime in the northern Qiangtang Depression is driven mainly by hydrothermal convection. Gas reservoirs are possible targets for hydrocarbon exploration in this depression. Currently, the northwestern part of the northern Qiangtang Depression is the most favourable area for gas hydrate exploration in the Qiangtang Basin.     

Geochemistry,origin and accumulation of natural gases in the deepwater area of the Qiongdongnan Basin,South China Sea

The Qiongdongnan Basin, South China Sea has received huge thickness (>12 km) of Tertiary-Quaternary sediments in the deepwater area to which great attention has been paid due to the recent discoveries of the SS22-1 and the SS17-2 commercial gas fields in the Pliocene-Upper Miocene submarine canyon system with water depth over 1300 m. In this study, the geochemistry, origin and accumulation models of these gases were investigated. The results reveal that the gases are predominated by hydrocarbon gases (98%–99% by volume), with the ratio of C₁/C_1-5 ranging from 0.92 to 0.94, and they are characterized by relatively heavy δ¹³C₁ (−36.8‰ to −39.4‰) and δD_CH4 values (−144‰ to −147‰), similar to the thermogenic gases discovered in the shallow water area of the basin. The C_5-7 light hydrocarbons associated with these gases are dominated by isoparaffins (35%–65%), implying an origin from higher plants. For the associated condensates, carbon isotopic compositions and high abundance of oleanane and presence of bicadinanes show close affinity with those from the YC13-1 gas field in the shallow water area. All these geochemical characteristics correlate well with those found in the shales of the Oligocene Yacheng Formation in the Qiongdongnan Basin. The Yacheng Formation in the deepwater area has TOC values in the range of 0.4–21% and contains type II_b–III gas-prone kerogens, indicating an excellent gas source rock. The kinetic modeling results show that the δ¹³C₁ values of the gas generated from the Yacheng source rock since 3 or 4 Ma are well matched with those of the reservoir gases, indicating that the gas pool is young and likely formed after 4 Ma. The geologic and geochemical data show that the mud diapirs and faults provide the main pathways for the upward migration of gases from the deep gas kitchen into the shallow, normally pressured reservoirs, and that the deep overpressure is the key driving force for the vertical and lateral migration of gas. This gas migration pattern implies that the South Low Uplift and the No.2 Fault zone near the deepwater area are also favorable for gas accumulation because they are located in the pathway of gas migration, and therefore more attention should be paid to them in the future.     

Hydrocarbon generation and expulsion characteristics of Eocene source rocks in the Huilu area,northern Pearl River Mouth basin,South China Sea: Implications for tight oil potential

In recent years, new oil reservoirs have been discovered in the Eocene tight sandstone of the Huilu area, northern part of the Pearl River Mouth basin, South China Sea, indicating good prospects for tight oil exploration in the area. Exploration has shown that the Huilu area contains two main sets of source rocks: the Eocene Wenchang (E₂w) and Enping (E₂e) formations. To satisfy the requirements for further exploration in the Huilu area, particularly for tight oil in Eocene sand reservoirs, it is necessary to re-examine and analyze the hydrocarbon generation and expulsion characteristics. Based on mass balance, this study investigated the hydrocarbon generation and expulsion characteristics as well as the tight oil resource potential using geological and geochemical data and a modified conceptual model for generation and expulsion. The results show that the threshold and peak expulsion of the E₂w source rocks are at 0.6% vitrinite reflectance and 0.9% vitrinite reflectance, respectively. There were five hydrocarbon expulsion centers, located in the western, eastern, and northern Huizhou Sag and the southern and northern Lufeng Sag. The hydrocarbon yields attributed to E₂w source rocks are 2.4 × 10¹¹ tons and 1.6 × 10¹¹ tons, respectively, with an expulsion efficiency of 65%. The E₂e source rock threshold and peak expulsion are at 0.65% vitrinite reflectance and 0.93% vitrinite reflectance, respectively, with hydrocarbon expulsion centers located in the centers of the Huizhou and Lufeng sags. The yields attributed to E₂e source rocks are 1.1 × 10¹¹ tons and 0.2 × 10¹¹ tons, respectively, with an expulsion efficiency of 20%. Using an accumulation coefficient of 7%–13%, the Eocene tight reservoirs could contain approximately 1.3 × 10¹⁰ tons to 2.3 × 10¹⁰ tons, with an average of 1.8 × 10¹⁰ tons, of in-place tight oil resources (highest recoverable coefficient can reach 17–18%), indicating that there is significant tight oil potential in the Eocene strata of the Huilu area.     

南海西北部琼东南盆地深水沉积环境演化及其油气勘探意义

Over the past several years, a number of hydrocarbon reservoirs have been discovered in the deepwater area of Qiongdongnan Basin, northwestern South China Sea. These oil/gas fields demonstrate that the...