Pipe–soil interaction and pipeline performance under strike–slip fault movements

The performance of pipelines subjected to permanent strike–slip fault movement is investigated by combining detailed numerical simulations and closed-form solutions. First a closed-form solution for the force–displacement relationship of a buried pipeline subjected to tension is presented for pipelines of finite and infinite lengths. Subsequently the solution is used in the form of nonlinear springs at the two ends of the pipeline in a refined finite element model, allowing an efficient nonlinear analysis of the pipe–soil system at large strike–slip fault movements. The analysis accounts for large strains, inelastic material behavior of the pipeline and the surrounding soil, as well as contact and friction conditions on the soil–pipe interface. The numerical models consider infinite and finite length of the pipeline corresponding to various angles β between the pipeline axis and the normal to the fault plane. Using the proposed closed-form nonlinear force–displacement relationship for buried pipelines of finite and infinite length, axial strains are in excellent agreement with results obtained from detailed finite element models that employ beam elements and distributed springs along the pipeline length. Appropriate performance criteria of the steel pipeline are adopted and monitored throughout the analysis. It is shown that the end conditions of the pipeline have a significant influence on pipeline performance. For a strike–slip fault normal to the pipeline axis, local buckling occurs at relatively small fault displacements. As the angle between the fault normal and the pipeline axis increases, local buckling can be avoided due to longitudinal stretching, but the pipeline may fail due to excessive axial tensile strains or cross sectional flattening. Finally a simplified analytical model introduced elsewhere, is enhanced to account for end effects and illustrates the formation of local buckling for relative small values of crossing angle.     

Mechanical behavior of buried steel pipes crossing active strike-slip faults

The present paper addresses the mechanical behavior of buried steel pipes crossing active strike-slip tectonic faults. The pipeline is assumed to cross the vertical fault plane at angles ranging between zero and 45 degrees. The fault moves in the horizontal direction, causing significant plastic deformation in the pipeline. The investigation is based on numerical simulation of the nonlinear response of the soil–pipeline system through finite elements, accounting for large strains and displacements, inelastic material behavior of the pipeline and the surrounding soil, as well as contact and friction on the soil–pipe interface. Steel pipes with D/t ratio and material grade typical for oil and gas pipelines are considered. The analysis is conducted through an incremental application of fault displacement. Appropriate performance criteria of the steel pipeline are defined and monitored throughout the analysis. The effects of various soil and line pipe parameters on the mechanical response of the pipeline are examined. The numerical results determine the fault displacement at which the specified performance criteria are reached, and are presented in diagram form, with respect to the crossing angle. The effects of internal pressure on pipeline performance are also investigated. In an attempt to explain the structural behavior of the pipeline with respect to local buckling, a simplified analytical model is also developed that illustrates the counteracting effects of pipeline bending and axial stretching for different crossing angles. The results from the present study can be used for the development of performance-based design methodologies for buried steel pipelines.     

A refined seismic analysis and design of buried pipeline for fault movement

Some lifelines, such as gas and oil transmission lines and water and sewer pipelines, have been damaged in recent earthquakes. The damages of these lifelines may cause major, catastrophic disruption of essential services for human needs. Large abrupt differential ground movements that result from an active fault present one of the most severe effects of an earthquake on a buried pipeline system. Although simplified analysis procedures for buried pipelines across strike-slip fault zones that cause tensile failure of the pipeline have been proposed, the results are not accurate enough because of several assumptions involved, such as the omission of flexural rigidity of the pipe, simplification of soil resistant characteristics, etc. Note that the omission of flexural rigidity cannot satisfy equilibrium conditions for pipelines across a ‘reverse’ strike-slip fault that causes compressions in the pipeline. This paper presents a refined analysis procedure for buried pipelines that is applicable to both strike-slip and reverse strikeslip faults after modifying some of the assumptions used previously. Based on the analytical results, this paper also discusses the design criteria for buried pipelines which are subjected to various fault movements. Parametric responses of buried pipeline for various fault movements, angles of crossing, buried depths and pipe diameters are presented.     

地震断层作用下的埋地管道等效分析模型

地震作用下,活动断层附近的埋地管道易发生强度屈服、局部屈曲或整体失稳等形式的破坏,建立准确、高效的埋地管道在断层作用下的计算模型,对管道的抗震设计和震后安全状态评估具有重要的实用价值。本文采用非线性弹簧模拟远离断层处埋地管道的反应,基于管土之间小变形段管道处于强化阶段,提出一种改进的管土等效分析模型,进一步减小了管土之间大变形段的分析长度,从而提高了有限元分析效率。该模型采用ALA推荐的方法计算管土间的滑动摩擦力,可以考虑土体种类的影响;用Kennedy方法确定管道的计算长度。通过与精确模型比较,验证了管土等效模型的合理性和有效性。     

沉陷区域埋地管线数值模拟分析

场地的不均匀沉陷是导致埋地管线破坏的重要原因之一。本文考虑了材料非线性、几何非线性以及管土接触非线性,将管线计算分析模型模拟为四节点薄壳单元结构,周围填覆土体采用八节点六面体单元划分。管土相互作用模拟为三维刚性与柔性的面面接触单元结构,并采用线性位移加载来模拟土体的沉陷作用,对三维薄壳有限元模型进行数值计算分析。通过比较不同参数,如沉陷长度、沉陷深度、埋深、管径、径厚比、土特性等对管线的反应影响,得出管线在沉陷情况下的应力和应变的关系,通过算例分析,说明了该方法能更好地模拟管线的破坏过程,该方法将为沉陷区域埋地管线数值模拟提供理论分析依据。     

跨断层隔震管道管端与土体相互作用分析

断层错动是造成埋地管道破坏的重要因素之一,因此,跨断层埋地管道在断层错动下的破坏机制、模型设计与参数分析和管道抗断层措施一直是生命线工程的前沿问题。对跨断层管道内力分析取得的成果较多,比较经典的是Newm ark-Hall方法、Kennedy方法和王汝梁方法,后来又出现基于壳模型的有限元分析方法。现有的管道抗断层措施具有其优点的同时亦有其不足。本文基于壳模型的有限元动力数值模拟,对一种管道跨断层隔震措施进一步研究,考虑管端与土体相互作用计算隔震管段的断层错动响应。计算结果表明拉应变容易在土中的管段传递,相比较而言,压应变不容易在土中的管段传递;最大拉应变降低比较多,最大压应变降低比较少。根据分析结果,对跨断层隔震管段边界条件的选取提出建议。     

Centrifuge modeling of buried continuous pipelines subjected to normal faulting

Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated.     

A simplified analysis model for determining the seismic response of buried steel pipes at strike-slip fault crossings

The seismic response analysis of buried pipelines at fault crossings is a complex problem requiring nonlinear 3D soil-structure and large deformation analyses. Such analyses are computationally expensive and the results are hard to evaluate. Therefore, a simple numerical model is needed for engineering and design offices to determine the seismic demand of steel pipes at fault crossings. This paper presents a simplified numerical model for buried steel pipes crossing strike-slip faults and oriented perpendicular to the fault. Two pipes with different diameter to thickness (D/t) ratios and steel grades are used in the study. The proposed model permits plastic hinge formations in the pipe due to incrementally applied fault movements, allows determination of the critical length of the pipeline and measure strains developed on the tension and compression sides in the pipe. The model also considers the effect of bending as well as axial strains due to stretching.     

Non-linear dynamic earth dam–foundation interaction using a BE–FE method

A general, rigorous, coupled Boundary Element–Finite Element (BE–FE) formulation is presented for non-linear seismic soil–structure interaction in two dimensions. The BE–FE method is applied to investigate the inelastic response of earth dams to transient SV waves. The dam body, consisting of heterogeneous materials modelled with a simple non-linear hysteretic model, is discretized with finite elements, whereas the elastic half-space is discretized with boundary elements. The study focuses on the combined effects of the material non-linearity and foundation flexibility. The results show the significant effect of the foundation flexibility in reducing the response through radiation of energy. For excitations with peak ground accelerations from 0·2gto 0·6g, the crest acceleration amplification ranges from 2·5 to 1·4 and seems to be comparable with field observations and results from other studies. Deamplification increasing with strain is reported at the lower part of the dam. The method is computationally powerful and can be used for efficient non-linear analysis of complex soil–structure systems. The efficiency of the BE–FE method allows further improvements with incorporation of a more advanced constitutive model and consideration of the generation and dissipation of pore-water pressures during the earthquake. © 1998 John Wiley & Sons, Ltd.     

The application of CFRP to strengthen buried steel pipelines against subsurface explosion

Multiple explosions in the route of oil and gas transmission pipelines during recent years demonstrate that terrorist attacks and sabotages have unfortunately increased. The present investigation is carried out numerically in order to minimize the amount of damages imposed on steel pipelines under close-in explosions. This research presents a novel concept, using CFRP (Carbon Fiber Reinforced Polymer) to strengthen the wall of steel pipelines against these incidents. For this purpose, a full coupled 3D finite element model developed using a combined Eulerian-Lagrangian method. The simplified Johnson-Cook material model, the JWL equation of state, and the ideal gas equation of state were employed for modeling the pipe material behavior, charge detonation, and air, respectively. Mechanical behavior of the composite wrap was simulated using an anisotropic material model and the damage initiation criteria were based on Hashin's theory. In addition, soil mass behavior was modeled applying a Drucker-Prager strength criterion with piecewise hardening and hydro tensile limit accompanied by Mie-Grüneisen equation of state. Several comparisons carried out between the results from present investigation and those from field and empirical studies and good agreements were observed. The results show that using a proper thickness of CFRP wrap for every particular circumstance can significantly improve the performance of steel pipelines under blast loads. For instance, in the current example, maximum equivalent strains developed in the most of the studied pipelines decreased by over 30% (up to 64%) with the application of 4-mm-thickness CFRP wrap. The present study contributes to protective design of steel pipelines.     

校园地下管线抗震评估初步探讨

对前人有关直埋地下管线的震害及其影响因素进行了简单总结,整理分析了前人关于管线震害评估的有关标准.结合某学院实际管网的资料,进行了各种管线的震害率计算,并对其进行了基于郭恩栋方法的震害等级评定及影响因素分析,得出:(1)设防烈度下管网系统在应急上能基本满足要求,但在使用功能上需进行修复;(2)对于断层影响,管道与断层应呈60°交角并采取抗震构造措施;(3)管网设计中应选用韧性、大口径、大曲率弯头的管材.     

Seismic damage analysis of the outlet piers of arch dams using the finite element sub-model method

This study aims to analyze seismic damage of reinforced outlet piers of arch dams by the nonlinear finite element(FE) sub-model method. First, the dam–foundation system is modeled and analyzed, in which the effects of infinite foundation, contraction joints, and nonlinear concrete are taken into account. The detailed structures of the outlet pier are then simulated with a refined FE model in the sub-model analysis. In this way the damage mechanism of the plain(unreinforced) outlet pier is analyzed, and the effects of two reinforcement measures(i.e., post-tensioned anchor cables and reinforcing bar) on the dynamic damage to the outlet pier are investigated comprehensively. Results show that the plain pier is damaged severely by strong earthquakes while implementation of post-tensioned anchor cables strengthens the pier effectively. In addition, radiation damping strongly alleviates seismic damage to the piers.     

Seismic response evaluation of the impact of corrosion on buried pipelines based on the Markov process

Water distribution and gas supply systems are among the infrastructure systems that have many buried steel pipelines. Corrosion gradually appears inside and outside of the pipe walls over the service life of these pipelines, the corrosion is primarily caused by the surrounding soil and the materials that flow through the pipelines. However, due to the uncertainty of the characteristics of the soil and materials, the size of the corrosion region is a stochastic variable. In this paper, using a homogeneous Markov process, a model is presented to simulate the occurrence of corrosion. Then, in combinations with a linear corrosion development model, the probability density function of the pipeline area corrosion percentage is derived. Based on the corrosion model, the pipeline seismic displacements and stresses are predicted. Furthermore, using the random perturbation approach, the mean and variance of the pipeline seismic response are given. To illustrate the validity of the proposed approach, a 200-meter long pipeline is numerically investigated and its random seismic response is obtained.     

Dynamic soil–structure interaction analysis of a telescope at the Javalambre Astrophysical Observatory

This paper presents the dynamic soil–structure analysis of the main telescope T250 of the Observatorio Astrofísico de Javalambre (OAJ, Javalambre Astrophysical Observatory) on the Pico del Buitre. Vibration control has been of prime concern in the design, since astrophysical observations may be hindered by mechanical vibration of optical equipment due to wind loading. The telescope manufacturer therefore has imposed a minimal natural frequency of 10 Hz for the supporting telescope pier. Dynamic soil–structure interaction may significantly influence the lowest natural frequency of a massive construction as a telescope pier. The structure clamped at its base has a resonance frequency of 14.3 Hz. A coupled finite element–boundary element (FE–BE) model of the telescope pier that accounts for the dynamic interaction of the piled foundation and the soil predicts a resonance frequency of 11.2 Hz, demonstrating the significant effect of dynamic soil–structure interaction. It is further investigated to what extent the coupled FE–BE model can be simplified in order to reduce computation time. The assumption of a rigid pile cap allows us to account for dynamic soil–structure interaction in a simplified way. A coupled FE–BE analysis with a rigid pile cap predicts a resonance frequency of 11.7 Hz, demonstrating a minor effect of the pile cap flexibility on the resonance frequency of the telescope pier. The use of an analytical model for the pile group results in an overestimation of the dynamic soil stiffness. This error is due to the large difference between the actual geometry and the square pile cap model for which the parameters have been tuned.     

Pipe–soil interaction for segmented buried pipelines subjected to dip faults

This paper describes an investigation of pipe–soil interaction equations suggested by currently used pipeline seismic design codes and the applicability of these equations to segmented pipelines. The results of computer‐aided analyses were compared to results obtained in full‐scale experiments on a segmented ductile iron pipeline 93 mm in diameter and 15 m in length. The pipeline was installed 600 mm below the ground surface in a sandy soil compacted to two different subgrade reaction values. The type of fault considered was a reverse fault with an intersection angle of 60° with the pipeline, and the fault movement was a total of 350 mm in three same steps in the fault trace direction. The findings of this study demonstrate the necessity of considering the nature of soil behavior in pipe–soil interaction equations and the effects of connection joints on the integrated response of pipelines to fault‐induced ground deformations. A new combination of equations constituting a direction‐wise selection from among the equations proposed by currently used guidelines is introduced as a new series to describe pipe–soil interaction for segmented pipelines and is verified using the results of full‐scale experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

Dynamic response of a porous seabed around pipeline under three-dimensional wave loading

The evaluation of the wave-induced pore pressure around a buried pipeline is particularly important for pipeline engineers involved in the design of offshore pipelines. Most previous investigations of the wave-induced dynamic response around an offshore pipeline have limited to two-dimensional cases. In this paper, a three-dimensional model including buried pipeline is established, based on the existing DYNE3WAC models. Based on the proposed numerical model and poro-elastic soil material assumption, the effects of wave and soil characteristics, such as wave period, water depth, shear modulus and permeability, and configuration of pipelines, such as pipeline radius and pipeline buried depth, on the wave-induced excess pore pressure will be examined. Numerical results indicated that the normalized excess pore pressures versus z/h near the pipeline increase as the obliquity angle, wave period and water depth increase, and they decrease as the burial depth and radius of pipeline increase above the pipeline. Soil permeability has obvious influence on the wave-induced normalized excess pore pressure, and different soil material will result in distinct computation results.     

Finite element analysis of buried steel pipelines under strike-slip fault displacements

The present paper investigates the mechanical behavior of buried steel pipelines, crossing an active strike-slip tectonic fault. The fault is normal to the pipeline direction and moves in the horizontal direction, causing stress and deformation in the pipeline. The interacting soil–pipeline system is modelled rigorously through finite elements, which account for large strains and displacements, nonlinear material behavior and special conditions of contact and friction on the soil–pipe interface. Considering steel pipelines of various diameter-to-thickness ratios, and typical steel material for pipeline applications (API 5L grades X65 and X80), the paper focuses on the effects of various soil and pipeline parameters on the structural response of the pipe, with particular emphasis on identifying pipeline failure (pipe wall wrinkling/local buckling or rupture). The effects of shear soil strength, soil stiffness, horizontal fault displacement, width of the fault slip zone are investigated. Furthermore, the influence of internal pressure on the structural response is examined. The results from the present investigation are aimed at determining the fault displacement at which the pipeline fails and can be used for pipeline design purposes. The results are presented in diagram form, which depicts the critical fault displacement, and the corresponding critical strain versus the pipe diameter-to-thickness ratio. A simplified analytical model is also developed to illustrate the counteracting effects of bending and axial stretching. The numerical results for the critical strain are also compared with the recent provisions of EN 1998-4 and ASCE MOP 119.     

Probabilistic permanent fault displacement hazard via Monte Carlo simulation and its consideration for the probabilistic risk assessment of buried continuous steel pipelines

Permanent fault displacements (PFDs) because of fault ruptures emerging at the surface are critical for seismic design and risk assessment of continuous pipelines. They impose significant compressive and tensile strains to the pipe cross‐section at pipe‐fault crossings. The complexity of fault rupture, inaccurate mapping of fault location and uncertainties in fault‐pipe crossing geometries require probabilistic approaches for assessing the PFD hazard and mitigating pipeline failure risk against PFD. However, the probabilistic approaches are currently waived in seismic design of pipelines. Bearing on these facts, this paper first assesses the probabilistic PFD hazard by using Monte Carlo‐based stochastic simulations whose theory and implementation are given in detail. The computed hazard is then used in the probabilistic risk assessment approach to calculate the failure probability of continuous pipelines under different PFD levels as well as pipe cross‐section properties. Our probabilistic pipeline risk computations consider uncertainties arising from complex fault rupture and geomorphology that result in inaccurate mapping of fault location and fault‐pipe crossings. The results presented in this paper suggest the re‐evaluation of design provisions in current pipeline design guidelines to reduce the seismic risk of these geographically distributed structural systems. Copyright © 2016 John Wiley & Sons, Ltd.     

供水管道震害预测模型及其在GIS环境下的实现

供水管道的震害主要原因是强烈的地面运动或场地失效以及管材、管径尺度等因素的影响。因此,将管道细分为单元,并分别考虑主要因素是强烈的地面运动或场地失效对单元的震害影响,建立相应的震害预测模型;单元综合震害以及由单元组成的管道体系的震害,则采用综合概率法进行预测。用GIS空间分析技术,依据用户指定的单元划分原则进行多因素单元自动划分,将有助于提高震害预测的自动化水平和预测效率。另外主要介绍了供水管道的单元震害预测模型和综合概率预测模型;叙述了在GIS环境下管道数据管理与查询、地图显示、预测单元自动划分、预测结果的显示输出等功能设计。     

砂土液化引起大位移对地下管道影响的非线性分析

地下管线是生命线工程的主要部分,已经成为现代工农业生产和城镇生活的大动脉。已有震害调查表明,饱和砂土液化引起的地基大变形(侧向变形和沉降)是导致强震区生命线工程震害的主要原因。采用三维非线性有限差分分析方法来研究砂土液化引起的大位移对地下管道的破坏特征,分析砂土液化的斜坡变形特征、孔隙水的演化过程。结果表明,砂土液化引起的大位移对地下管道有破坏作用,导致管道变形规律与其斜坡的位移规律相同,地下管线的变形随着振动频率和幅值的增加其非线性增大。