闽—粤东南沿海大陆边缘韧性剪切带的基本特征

东南沿海大陆边缘剪切带是西太平洋活动大陆边缘构造带的组成部分,它是一条具有多次活动的左旋韧性平移剪切带。在本剪切带中可以观察到3种类型的构造:（1）规模巨大的呈北北东—北东向展布的糜棱岩带以及山拉伸线理组成的线状构造带。它们在平面上有明显的从断目两侧向中心递进变形特征;（2）呈北东走向陡倾角的糜棱叶理（Sa）、应变滑劈理或破劈理（Sb）、小型剪切带（Sc）;（3）由西到东断层作用样式和断层岩具有明显的递进变化特点。西部（浅部）断层作用以脆性剪切滑动为主,其断层岩则由假玄武玻璃及镜面糜棱岩组成;中部断层作用以跪—韧性剪切为主,为断层泥—碎裂岩—超碎裂岩;东部(深部,以韧性剪切作用为主,其断层岩为暖棱岩—花岗糜桂片麻岩—眼球状糜棱岩系列。以上特点表明在本剪切带内透入性和非透入性变形之间有着密切的关系,反映出在变形过程中具有由韧性变形逐渐向脆性变形的发展趋势。     

A Large Ductile Sinistral Strike-Slip Shear Zone and Its Movement Timing in the South Qilian Mountains, Western China

There is a large ductile shear zone, 2 km wide and more than 3SO km long, in the South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareous mylonites. The microstructures of the ductile shear zone show nearly E-W extending subvertical foliation, horizontal and oblique stretching lineations, shearing sense from sinis-tral to oblique sinistral strike-slip from east to west, "A" type folds and abundant granitic veins. Measured lattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the granitic mylonite in the west segment suggest a strong LPO characterized by the dominant slip systems {1010} formed at high temperature (>650℃). K-feldspar of the mylonite shows an 39Ar/40Ar high-temperature plateau age of 243.3±1.3 Ma, and biotite, 250.5±0.5 Ma, which represent the formation age of the ductile shear zone. The 39Ar/40Ar plateau ages of 169.7±0.3 Ma and 160.6±0.1 Ma and the 39Ar/40Ar isochron ages of 166.99±2.37 Ma and 160.6±0.1 Ma of biot     

Structures,kinematic analysis,rheological parameters and temperature-pressure estimate of the Mesozoic Xingcheng-Taili ductile shear zone in the North China Craton

The NE to ENE trending Mesozoic Xingcheng-Taili ductile shear zone of the northeastern North China Craton was shaped by three phases of deformation. Deformation phase D₁ is characterized by a steep, generally E–W striking gneissosity. It was then overprinted by deformation phase D₂ with NE-sinistral shear with K-feldspar porphyroclasts forming a subhorizontal low-angle stretching lineation on a steep foliation. During deformation phase D₃, lateral motion accommodated by ENE sinistral strike-slip shear zones dominated. Associated fabrics developed at upper greenschist metamorphic facies conditions and show the deformation characteristics of middle- to shallow crustal levels. In some parts, the older structures have been in turn overprinted by late-stage sinistral D₃ shearing. Finite strain and kinematic vorticity in all deformed granitic rocks indicate a prolate ellipsoid (L-S tectonites) near plane strain. Simple shear-dominated general shear during D₃ deformation is probably of general significance. The quartz c-axis textures indicate prism-gliding with a dominant rhomb <a> slip and basal <a> slip system formed mainly at low-middle temperatures. Mineral deformation behavior, quartz c-axis textures, quartz grain size and the Kruhl thermometer demonstrate that the ductile shear zone developed under greenschist facies metamorphic conditions at deformation temperatures ranging from 400 to 500 °C. Dislocation creep is the main deformation mechanism at a shallow crustal level. Fractal analysis showed that the boundaries of recrystallized quartz grains had statistically self-similarities. Differential stresses deduced from dynamically recrystallized quartz grain size are at around 20–39 MPa, and strain rates in the order of 10⁻¹² to 10⁻¹⁴ s⁻¹. This indicates deformation of granitic rocks in the Xingcheng-Taili ductile shear zone at low strain rates, which is consistent with most other ductile shear zones. Hornblende-plagioclase thermometer and white mica barometer indicate metamorphic conditions of medium pressures at around ca. 3–5 kbar and temperatures of 400–500 °C within greenschist facies conditions. The main D₃ deformation of the ENE-trending sinistral strike-slip ductile shearing is related to the roll-back of the subducting Pacific plate beneath the North China Craton.     

桂北四堡韧性剪切带的发现及其构造意义

通过野外观察、室内显微构造分析和磁组构测量方法,在桂北四堡地区浅变质地层中厘定出一条NE30°走向,南东倾,倾角约40°的大型左旋斜冲韧性剪切带——四堡韧性剪切带;该韧性剪切带内发育糜棱岩系列、糜棱面理、拉伸线理、A型褶皱、S-C组构、亚颗粒、显微分层及石英条带等宏观和微观构造特征;磁各向异性度测量结果显示四堡韧性剪切带由一宽约4 km的强应变带及边缘弱带组成,全带宽达10 km,长度超30 km;在对韧性剪切带运动学、构造年代学研究的基础上,结合区域地质资料,认为四堡韧性剪切带是华南加里东晚期华夏地块由南东向北西作低角度斜冲到扬子地块的产物。这一发现揭示了扬子地块与华夏地块碰撞拼合的方式,为深化华南构造演化提供了新资料。     

Mid-crustal shear zone evolution in a syn-tectonic late Hercynian granitoid (Sila Massif,Calabria, southern Italy)

By means of petrogrological, meso- and microstructural analyses, the fabric of a syn-tectonic late Hercynian K-feldspar megacryst-bearing granodiorite is described in this paper. The granodiorite was emplaced at 293 Ma within migmatitic paragneisses which had reached the regional peak metamorphic conditions at 304–300 Ma. The granodiorite and the migmatitic paragneisses are both affected by the same ductile shear zone. In the core of the shear zone, mylonites show a clear grain-size reduction and microstructures related to deformation at high to medium temperature conditions. Migmatitic paragneisses, foliated granodiorites and mylonites mostly show concordant lineation and foliation orientations. In addition, the preferred orientation of euhedral feldspars in granodiorites indicates that the fabric anisotropy started to develop in the magmatic state. These features strongly suggest that shear deformation was active during crystallisation of granitoids and continued under subsolidus conditions. In wall rocks and mylonites, kinematic indicators such as - and -type porphyroclasts, S/C fabrics, shear bands and quartz (c) axis orientations suggest a top-to-the-W sense of shear. This is similar to the magma flow direction indicated by the tiling of euhedral feldspar megacrysts in granodiorites. Shear deformation developed, preferentially, by partitioning of strain in the granodioritic crystal mush. Geobarometry indicates that deformation took place at middle crustal levels (P=400–500 MPa). Whole rock-white mica Rb/Sr geochronological analysis of an undeformed pegmatite, crosscutting the mylonitic foliation, provided an age of 265 Ma. Timing of deformation is therefore bracketed between 293 Ma and 265 Ma.     

越城岭花岗岩体西侧滑脱型韧性剪切带的发现及其形成的构造体制

越城岭花岗岩体西侧片麻状花岗岩带主体是一条由韧性剪切作用形成的复合糜棱岩带,包括早期高绿片岩相条件下形成的糜棱片麻岩和晚期低绿片岩相条件下形成的糜棱岩。高绿片岩相韧性剪切带和低绿片岩相韧性剪切带具有基本一致的运动学性质,为滑脱型韧性剪切带,总体为在向NWW缓倾的糜棱面理上向SW方向滑动,并在平面上表现为左旋效应。根据构造对比研究,认为越城岭西侧滑脱型韧性剪切带形成于后造山阶段的伸展构造体制。     

Strain, Kinematic Vorticity and Ductile Thinning along the Detachment Zone of the Yunmeng Shan Metamorphic Core Complex, Beijing, China

The Yunmeng Shan metamorphic core complex (MCC) is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone (mylonite zone), chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks (Es=0.66–0.72) to protomylonites (Es=0.66–0.83), and to mylonites (Es=0.71–1.2). The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite (0.47相似文献   

松辽盆地西缘断裂带中花岗质糜棱岩的锆石SHRIMP和云母氩-氩年龄及其构造意义

松辽盆地西缘发育大型的北北东走向韧性断裂带,该韧性断裂带的性质、活动时限一直存在争议,制约了对松辽盆地构造成因的认识以及松辽盆地西缘油气勘探开发的进展。腾克、金星及嘎拉山地区是松辽盆地西缘韧性断裂带的代表性出露区,主体岩石组合为条带状花岗质糜棱岩、眼球状花岗质糜棱岩等。腾克、金星及嘎拉山地区发育一组糜棱面理和线理,其中面理为110°~135°∠45°~65°、线理为倾伏向10°~25°,倾伏角10°~35°;其运动性质均显示左行走滑特征。确定韧性断裂带活动时限的样品采自构造带内花岗质糜棱岩的锆石和同变形云母,其中锆石SHRIMP谐和年龄为296.9~299.4 Ma;黑云母⁴⁰Ar-³⁹Ar年龄为(123.0±0.7)Ma,白云母的⁴⁰Ar-³⁹Ar年龄为(124.4±0.9)Ma。松辽盆地西缘韧性断裂带应该属于嫩江断裂带的北段。年龄结果表明该韧性断裂带中花岗岩侵位于晚石炭世,大型北北东向韧性构造变形发生于早白垩世。腾克金星嘎拉山剪切带控制松辽盆地西缘,同时表明松辽盆地在早白垩世经历了走滑挤压盆地演化阶段,这种大型北北东向韧性断裂带的形成可能与当时西太平洋伊泽纳崎板块向欧亚大陆俯冲发生转向有关。     

Shear localization,velocity weakening behavior,and development of cataclastic foliation in experimental granite gouge

Microstructural aspects of room-temperature deformation in experimental Westerly granite gouge were studied by a set of velocity stepping rotary-shear experiments at 25 MPa normal stress. The experiments were terminated at: (a) 44 mm, (b) 79 mm, and (c) 387 mm of sliding, all involving variable-amplitude fluctuations in friction. Microstructural attributes of the gouge were studied using scanning (SEM) and scanning transmission electron microscopy (STEM), image processing, and energy dispersive X-ray (EDX) analyses. The gouge was velocity weakening at sliding distances >10 mm as a core of cataclasites along a through-going shear zone developed within a mantle of less deformed gouge in all experiments. Unlike in experiment (a), the cataclasites in experiments (b) and (c) progressively developed a foliation defined by stacks of shear bands. The individual bands showed an asymmetric particle-size grading normal to shearing direction. These microstructures were subsequently disrupted and reworked by high-angle Riedel shears. While the microstructural evolution affected the effective thickness and frictional strength of the gouge, it did not affect its overall velocity dependence behavior. We suggest that the foliation resulted from competing shear localization and frictional slip hardening and that the velocity dependence of natural fault gouge depends upon compositional as well as microstructural evolution of the gouge.     

康古尔韧性剪切带变形特征及控矿作用

康古尔韧性剪切带具明显的遥感影像特征和区域重、磁异常变化特征。韧性剪切引起的变质作用表现为强应力下的岩石变质、变形，变质相序从绿片岩相到角闪岩相，变质岩石类型为千枚岩、片岩、变粒岩、糜棱岩及糜校岩化的岩石。韧性剪切变形和塑性流动形成的面理、线理、招皱、韧性断裂等构造形迹十分明显，构成一条东百长1000多千米，南北宽20～30km的狭长线形构造带（强应变带）；它经历了多期次、多种构造作用交替叠加的变化过程，按性质分类属大型平移断裂系统。康古尔韧性剪切带控制着重要的金矿、铜镍矿床及稀有金属等矿产，是新疆东部有重要找矿意义的成矿带。     

Vorticity analysis in calcite tectonites: An example from the Attico-Cycladic massif (Attica,Greece)

Although calcite tectonites are widespread in nature their use to quantify flow vorticity is limited. We use new (micro-)structural, petrofabric and vorticity data to analyse the kinematics of flow in outcrop-scale calcite mylonite zones. These zones are genetically related to a crustal-scale NE-directed ductile thrust (Basal Thrust) that emplaced the Blueschist over the Basal unit during the exhumation of the Attico-Cycladic Massif. Calcite microstructures reveal that the last stage of deformation occurred at temperatures 200–300 °C achieved by mild heating, which is possibly related with the reburial of the Basal Thrust's footwall. Vorticity analyses were based on the degree of asymmetry of calcite c-axis fabrics as well as on the assumption that the orientation of the long axes of calcite neoblasts within an oblique foliation delineates the direction of instantaneous stretching axis. Both methodological approaches provide consistent estimates with a simple shear component between 55% and 82% (W_n = 0.76–0.96). The use of the stress axis (σ₁) orientation recorded by twin-c-axis-pairs to quantify vorticity generally gives significantly lower simple shear component. Comparison of our vorticity estimates with previous estimates inferred from quartz fabrics and rigid porphyroclasts reveals that exhumation-related deformation in the nappe pile was steady state.     

Propagation of seismic slip from brittle to ductile crust: Evidence from pseudotachylyte of the Woodroffe thrust, central Australia

The Woodroffe thrust, central Australia, is a > 1.5-km-wide mylonitized shear zone marked by large volumes of mm- to cm-scale pseudotachylyte veins. The pseudotachylytes display typical melt-origin features, including rounded and embayed clasts, spherulitic and dentritic microlites, and flow structures within a fine-grained matrix. Three types of pseudotachylyte are identified on the basis of deformation texture, vein morphology, and host-rock lithology: cataclasite-related (C-Pt), mylonite-related (M-Pt), and ultramylonite-related (Um-Pt). The M-Pt and Um-Pt veins intrude into mylonite and ultramylonite and are themselves overprinted by subsequent mylonitization. These pseudotachylytes contain an internal foliation defined by flattened porphyroclasts and layering of the fine-grained vein matrix, and the foliation is generally oriented parallel to foliation in the surrounding mylonite and ultramylonite. These observations constrain the timing and environment of M-Pt and Um-Pt pseudotachylyte formation to a protracted period of deformation and mylonitization within the ductile regime of the crust. The M-Pt and Um-Pt veins, as well as the host mylonite, are overprinted by cataclasis and multiple generations of late-stage C-Pt veins that were generated in the brittle-dominated regime of the upper crust during uplift and exhumation of the shear zone.The coexistence of multiple generations of voluminous C-Pt, M-Pt, and Um-Pt veins indicates that the pseudotachylyte veins represent a large number of large earthquakes and accompanying seismic slip over an extended period of seismicity on the Woodroffe thrust. The timing and distribution of pseudotachylyte indicate that the earthquakes nucleated at the base of the brittle-dominated seismogenic zone and propagated down through the brittle–ductile transition into the ductile-dominated regime of the crust.     

Deformation of footwall rock of Phulad Shear Zone,Rajasthan: Evidence of transpressional shear zone

Phulad Shear Zone (PSZ) of Delhi Fold Belt in Rajasthan is a northeasterly striking ductile shear zone with a well developed mylonitic foliation (035/70E) and a downdip stretching lineation. The deformation in the PSZ has developed in a transpressional regime with thrusting sense of movement. The northeastern unit, i.e., the hanging wall contains a variety of rocks namely calc-silicates, pelites and amphibolites and the southwestern unit, i.e., the footwall unit contains only granitic rocks. Systematic investigation of the granites of the southwestern unit indicate a gradual change in the intensity of deformation from a distance of about 1 km west of the shear zone to the shear zone proper. The granite changes from weakly deformed granite to a mylonite/ultramylonite as we proceed towards the PSZ. The weakly deformed granite shows a crude foliation with the same attitude of mylonitic foliation of the PSZ. Microscopic study reveals the incipient development of C and S fabric with angle between C and S varying from 15 ^° to 24 ^°. The small angle between the C and S fabric in the least deformed granite variety indicates that the deformation has strong pure shear component. At a distance of about 1 m away from the PSZ, there is abrupt change in the intensity of deformation. The granite becomes intensely foliated with a strong downdip lineation and the rock becomes a true mylonite. In mesoscopic scale, the granite shows stretched porphyroclasts in both XZ and YZ sections indicating a flattening type of deformation. The angle between the C and S fabric is further reduced and finally becomes nearly parallel. In most places, S fabric is gradually replaced by C fabric. Calculation of sectional kinematic vorticity number ( W_n) from the protomylonitic and mylonite/ultramylonite granites varies from 0.3 ± 0.03 to 0.55 ± 0.04 indicating a strong component of pure shear. The similarity of the geometry of structures in the PSZ and the granites demonstrates that the deformation of the two units is broadly synchronous and the deformation in both the units is transpressional.     

Ductile Shearing in Attur Shear Zone and its Relation with Moyar Shear Zone, South India

In the eastern part of southern Peninsular India, the charnockitic hills of the Madras block are cut across by the E-W trending Attur shear zone (ASZ) which is characterised by a thick (1 to 1.5 km) phyllonite zone, showing intense mylonitisation due to ductile shearing. Steeply plunging (70°–80°) stretching lineation on steeply dipping mylonitic foliation within this zone indicates a relative vertical upliftment of the adjacent blocks. A dextral shearing event from west to east is envisaged from the kinematic analysis of shear sense indicators such as S-C fabric, asymmetric folds, asymmetric augens and asymmetric porphyroclasts. Simultaneous development of these features, related to vertical and horizontal movements may be explained by the mechanism of transpressional deformation. The Attur shear zone may be correlated with the Moyar shear zone based on distinct lithological and structural similarities.     

新疆萨尔托海石英菱镁岩中发育的韧性剪切带及其对金矿的控制

萨尔托海金矿产在达拉布特蛇绿混杂岩带中。本文首次在该金矿区厘定出韧性剪切带,糜棱岩或者糜棱岩化石英菱镁岩中构成糜棱面理的矿物(铬云母、石英)形成于韧性剪切变形过程中,而切割糜棱面理的方解石-石英-黄铜矿-白云母脉代表脆性变形阶段的流体活动。根据矿物组合相互切割关系,识别出三期构造变形:早期NE向韧性变形(形成铬云母-石英组合)之后,发生了应力方向显著不同的破裂,形成NNW向分布的方解石-石英-黄铜矿-白云母脉;再晚期,应力方向又恢复到NE向,发育了浅层次的脆性构造破坏,形成了白云母-石英细脉。韧性剪切变形向脆性变形转换期间形成了石英-碳酸盐脉,其中往往含硫化物和自然金,此阶段是萨尔托海金矿的主要成矿时期。韧性剪切带控制着萨尔托海地区的金矿分布,成矿作用主要受沿剪切带迁移流体的控制,穿切糜棱面理的方解石-石英-黄铜矿-白云母脉是主要的找矿标志。韧性剪切带对金矿的显著控制表明,韧脆性转换期间形成的含硫化物石英碳酸盐脉以及相伴生的热液蚀变使金富集成矿,矿体一般赋存在断裂构造复杂的膨胀部位。萨尔托海金矿的成因与蛇绿岩的形成和演化没有关系。对韧性剪切带的系统研究是在该地区取得找矿勘探突破的关键。     

总体非共轴持续变形产生的构造及其运动学意义——以金州韧性剪切带为例*

构造解析证实,金州韧性剪切带是以右行走滑为主的大型缓倾斜剪切带,带内发育的糜棱面理-小型褶皱-香肠构造及肿缩构造-S?C组构的系列,以及广泛分布的拉伸线理,是总体非共轴持续变形条件下,带内共轴与非共轴线路相结合的结果,并且后者占主要地位。糜棱面理是最早生成的透入性构造,对其他构造的形成有重要作用。剪应变量(γ)大小与糜棱岩化程度有直接关系。鞘褶皱多发育于γ≥10地段。微构造发育机制的变化是：γ 由低到高,石英变形从低温晶体-塑性转向塑性变形与重结晶作用; 而云母矿物从外形定向转向粘性颗粒-边界滑动。     

Microstructures of mylonites along the Karakoram Shear Zone,Tangste Valley,Pangong Mountains,Karakoram

The Karakoram Shear Zone is a northwest-southeast trending dextral ductile shear zone, which has affected the granitic and granodioritic bodies of the southern Asian Plate margin in three distinct episodes. The ductile shearing of the granitic bodies at Tangste and Darbuk has resulted in the development of mylonites with mylonitic foliation and stretching lineation. More intense deformation is noted in the Tangste granite grading up to orthomylonite, as compared to the Darbuk granite. Kinematic indicators include S-C foliation, synthetic C′ and C″ antithetic shear bands, Type A s-mantled porphyroclasts, oblique quartz foliation, micro-shears with bookshelf gliding, mineral fishes including Group 2 mica fishes, and Type 1 and 2a pull-apart microstructures, and exhibit strong dextral sense of ductile shearing towards southeast. The textural features of the minerals, especially that of quartz and feldspar, indicate temperature of mylonitisation ranging between 300 and 500°C in the upper greenschist facies, and appear to have been evolved during exhumation as a consequence of oblique strike-slip movements along the Karakoram shear zone.     

Cordierite from a high-temperature low-pressure shear zone of the south-western Bohemian Massif (Moldanubian terrain,Austria)

A medium-scale shear zone exposed in the gneiss rocks of the South-western Bohemian Massif (Moldanubian Zone) contains cordierite, whose Na p.f.u. is subject to a significant increase from the centre to the edge of the deformation area, whilst other elements only show negligible variations. Coexisting mineral phases of cordierite include garnet, biotite, and sillimanite. According to the results obtained from the garnet-cordierite Fe²⁺/Mg²⁺-exchange thermometer a decrease of peak temperature from 639 °C in the central mylonite to 593 °C in the marginal mylonite can be observed, which indicates significant shear heating. Lithological pressures were estimated by considering the position of cordierite-forming reactions in the P-T field and the stability of coexisting sillimanite. They are subject to a reduction from 0.35 GPa in the highest deformed mylonite to 0.31 GPa at the margin of the shear zone. According to the results of comprehensive petrographic and mineralogical studies the investigated shear zone underwent a Variscan HT-LP metamorphic event implying the formation of cordierite and an Alpine MT-LP event entailing the rotation and decomposition of the cordierite phase.     

辽西兴城—台里韧性剪切带北段变形特征

辽西兴城—台里地区发育系列花岗质岩石,强烈构造变形特征均显示其具有韧性剪切带的特点。对剪切带北段进行详细宏微观构造解析,结合岩石变形强度差异性分析、有限应变测量、石英C轴EBSD测试以及古差异应力值估算等研究,结果表明剪切带内花岗质片麻岩和眼球状花岗质片麻岩具有NEE向左行剪切变形特征,变形岩石为S-L构造岩,应变类型属于平面应变,古差异应力值介于30~40 MPa之间。长石-石英矿物温度计以及石英C轴EBSD组构指示剪切带以中低温变形为主,温度在400℃~500℃,属绿片岩相变质,具中-低温韧性剪切带特征。韧性剪切带内普遍存在变形分解现象,弱变形带内岩石残斑含量较高,眼球状构造和S-C组构较为发育;强变形带岩石残斑含量较低,剪切面理较为发育,糜棱面理发育较弱或者不发育。