Multiple calcrete profiles in the Tabernas Basin,southeast Spain: their origins and geomorphic implications

The paper describes a sequence of Pliocene(? ) to Quaternary age calcretes developed within alluvial fan and fluvial gravels in the Tabernas Basin, Almería Province, southeast Spain. Calcrete profiles are described from sites adjacent to major tributaries of the Rambla de Tabernas. Six distinct calcrete units are identified within the basin. These have variable distributions but have developed in an identifiable evolutionary sequence. Two pairs of calcrete units are widely present across the basin preserving two former land surfaces. Each of the former land surfaces has been planated and subsequently buried by alluvial fan or fluvial gravels. A massive calcrete unit is present at the base of each gravel sequence, immediately in contact with the underlying bedrock, with a less well developed calcrete unit situated at the top of the gravel sequence. The lowest two calcrete units within the basin are more spatially restricted and are confined to the floors and flanks of incised drainage lines. The geochemistry, macro- and micromorphological properties and geomorphological positions of the calcrete units are outlined and, on the basis of this information, their mode of origin identified. Two main modes of calcrete genesis appear to be present: massive calcretes situated in direct contact with bedrock are suggested to have formed by groundwater processes, whilst calcretes situated at the top of gravel sequences are likely to have developed by pedogenic processes. Calcrete genesis is subsequently considered in the context of the reconstruction of the early phases of landscape development, and is suggested to have been controlled by phases of uplift and stability within the Tabernas Basin. © 1998 John Wiley & Sons, Ltd.     

River behaviour and Holocene alluviation: The River Severn at Welshpool,mid-Wales,U.K.

A combination of archaeological evidence, ¹⁴C dates, terrace mapping, heavy metal analysis, grain size analysis and historical maps is used in a detailed analysis of the alluvial history of the River Severn floodplain around Welshpool in mid-Wales, U.K. ‘Welshpool Gravels’ underlie a higher terrace surface up to 6–7 m above the present channel. They form a sequence of gravels at least 30 m in thickness. The upper surface is characterized by a series of braided palaeochannel patterns. These sediments were probably deposited at the end of the last glaciation as outwash, and are contemporaneous with other high, gravelly terrace deposits found in the Severn and other mid-Wales basins. Overlying the Welshpool Gravels on the contemporary floodplain are a variable thickness of finer sediments, the ‘Leighton Silts’. Morphological mapping and dating of two cut-offs to 2850 ± 60 a BP and 1190 ± 70 a BP indicates that a channel pattern similar to the present planform had formed by the mid to late Holocene. From this period, floodplain development has been dominated by a single-thread meandering channel with fine vertical sedimentation and limited lateral gravel accretion. Abandonment of extended lengths of channel formed by an avulsion mechanism is apparent. A combination of historical map data, ¹⁴C dates and the analysis for heavy metals in fine sediments, which were washed into the river system during mining, indicates that there has been at least 4 m of sedimentation since the early 17th century, but only in a central belt of varying width. Metal-rich waste, identified in the fine sediments of this zone of ‘Trehelig Silts’, indicates those areas which were most heavily sedimented during the peak of metalliferous mining in the 18th and 19th centuries. Although the near-channel margins appear to be superficially similar to the older floodplain, the spatial and vertical pattern of historic sedimentation is complex, and is not reflected in marked elevation differences. The division of sedimentation periods into these three broad time-spans (Late Quaternary Terraces, Late Holocene alluviation and avulsion, and the historical metal-mining period) shows that an apparently simple planar floodplain is in reality underlain by complex sedimentation units. Floodplain construction has involved the development of inset units, in cut-offs and adjacent to migrating channels, as well as the expected contrasts between in-channel and overbank environments. This has implications both for alluvial sedimentation modelling and for the identification of high-pollution zones on the floodplain. These cannot be predicted on the basis of simple ‘in-channel’ and ‘overbank’ environments given the historically complex evolution.     

Casabianca formation: a Colombian example of volcanism-induced aggradation in a fluvial basin

The Upper Pliocene to Pleistocene Casabianca Formation is an assemblage of coarse-grained volcanogenic sediments derived from the Ruiz-Cerro Bravo volcanic axis, which were deposited on the west and east flanks of the middle Colombian Central Cordillera (5°–5°30′ N Lat.; 74°30′–76° W Long.).Facies assemblages, paleocurrent data, and geomorphic expression define four depositional settings: (1) an alluvial fan with debris-flow lobes represented by the Manizales fan in the western sector and the Fresno fan in the eastern sector, characterized by the facies assemblage of Gms, Gp and Gt; (2) valley fill deposits represented by the Arauca section at the west sector, characterized by the facies assemblage of Gms and Gi; (3) deposits produced by the diversion of the debris-flow and hyperconcentrated flood-flow deposits from the main channels into narrow effluent channels; represented by the Delgaditas and Manzanares-Marquetalia sections, in the eastern sector and characterized by the facies assemblage Gms and Gm(a); and (4) lateral accretion in gravelly, medium to high-sinuosity rivers, represented by the Casabianca-Villa Hermosa, Palo Cabildo-Falan, Lagunillas and Guali sections of the eastern sector, characterized by the facies assemblage Gms, Gp and Gt.Casabianca Formation deposition records the response of a semi-arid to tropical fluvial system to large, volcanism-induced sediment loads.     

Holocene alluvial fan and terrace formation in the Bowland Fells,Northwest England

In the Bowland Fells, Lancashire, northwest England, in the headwater valleys of the Hodder river system, is a suite of Holocene fluvial landforms. Debris cones and alluvial fans at tributary junctions, and river terraces along the main valleys post-date late Pleistocene forms and pre-date the modern valley floor alluvial forms. Eight ¹⁴C dates from wood samples incorporated within the terrace and fan deposits have allowed two main phases of Holocene erosion to be identified with debris cone/fan deposition taking place after c. 5400 BP but before c. 1900 BP and again at c. 900 BP. Some of the fans and cones are complex with deposits attributable to both phases; others are simple and attributable only to the later phase. In the headwaters an upper terrace at c. 5400 BP pre-dates the cones and a lower terrace is contemporaneous with the first debris cone phase. Lower downvalley the youngest of three terraces date from c. 5000 BP or earlier indicating that the sequence is less complex downstream.     

Facies characteristics and magma–water interaction of the White Trachytic Tuffs (Roccamonfina Volcano, southern Italy)

 The Quaternary White Trachytic Tuffs Formation from Roccamonfina Volcano (southern Italy) comprises four non-welded, trachytic, pyroclastic sequences bounded by paleosols, each of which corresponds to small- to intermediate-volume explosive eruptions from central vents. From oldest to youngest they are: White Trachytic Tuff (WTT) Cupa, WTT Aulpi, WTT S. Clemente, and WTT Galluccio. The WTT Galluccio eruption was the largest and emplaced ∼ 4 km³ of magma. The internal stratigraphy of all four WTT eruptive units is a complex association of fallout, surge, and pyroclastic flow deposits. Each eruptive unit is organized into two facies associations, Facies Association A below Facies Association B. The emplacement of the two facies associations may have been separated by short time breaks allowing for limited reworking and erosion. Facies Association A consists of interbedded fallout deposits, surge deposits, and subordinate ignimbrites. This facies association involved the eruption of the most evolved trachytic magma, and pumice clasts are white and well vesiculated. The grain size coarsens upward in Facies Association A, with upward increases of dune bedform wavelengths and a decrease in the proportion of fine ash. These trends could reflect an increase in eruption column height from the onset of the eruption and possibly also in mass eruption rate. Facies Association B comprises massive ignimbrites that are progressively richer in lithic clast content. This association involved the eruption of more mafic magma, and pumice clasts are gray and poorly vesiculated. Facies Association B is interpreted to record the climax of the eruption. Phreatomagmatic deposits occur at different stratigraphic levels in the four WTT and have different facies characteristics. The deposits reflect the style and degree of magma–water interaction and the local hydrogeology. Very fine-grained, lithic-poor phreatomagmatic surge deposits found at the base of WTT Cupa and WTT Galluccio could record the interaction of the erupting magma with a lake that occupied the Roccamonfina summit depression. Renewed magma–water interaction later in the WTT Galluccio eruption is indicated by fine grained, lithic-bearing phreatomagmatic fall and surge deposits occurring at the top of Facies Association A. They could be interpreted to reflect shifts of the magma fragmentation level to highly transmissive, regional aquifers located beneath the Roccamonfina edifice, possibly heralding a caldera collapse event. Received: 26 August 1996 / Accepted: 27 February 1998     

The age of alluvial fan deposition at a site in the southern uplands of scotland

The age of a large alluvial fan debouching onto the valley floor of the River Tweed, in southern Scotland, and the sequence of events relating to this, are investigated using geomorphological, sedimentological, palynological, archaeological and radiocarbon dating evidence. Prior to fan deposition, the Tweed valley floor seems to have been covered by a wooded peat at a time of low fluvial activity. The fan commenced deposition in the 11th century AD, and appears to have been a local event, the Tweed showing no response to this accelerated sedimentation. Later, perhaps 200 years later, the Tweed commenced overbank deposition of the only Flandrian terrace preserved. Local proxy data are examined in order to define the causes of these events, but difficulties in temporal correlation, despite the good resolution of the radiocarbon chronology, mean that the causes of these events remain unknown.     

南黄海Heuksan盆地的地震地层学研究

南黄海中的南HEUKSAN盆地是一个介于矩形到菱形之间、大小大致为32 km×13 km的盆地.这个盆地有两个最厚的沉积中心;一个在盆地西部中央,地震双程到时2.2 s的部位;另一个在盆地东部中央位置.二者之间以中央隆起相隔.盆地的地震剖面可以进一步划分为古生代到三叠纪时期的前地堑相沉积,新生代的地堑充填沉积及中新世到上新世时期的的内凹沉积.地堑充填时期的沉积可以分为两个地震层序A和B.层序A和B又可以进一步划分为3到4个亚层序.在南HEUKSAN盆地利用地震层序学的方法对上始新统地震剖面进行了较为详细的分析.认为古水流大部分是从盆地的西部流入的.因此推断其沉积物源主要来自西北部地区,其次来自于盆地的北部.顶积层为三角洲相.根据反射地震剖面的连续性、振幅和反射频率等在上始新统的地震剖面上划分出4个地震相带.地震相A区主要位于两大沉积中心部位.为三角洲前缘泥砂.相带B位于沉积区的西北边缘为平坦三角洲的沙砾.相带C2沿着南部的盆地边缘断裂带分布,为冲积扇.结论认为:始新统的地震解释剖面表明当时主要为三角洲沉积.主要沉积物来自西北的陆源区和南HEUKSAN盆地的西北部.在盆地的南部边缘,沿着盆地的边界断层发育有冲积扇的沉积环境.     

The holocenic evolution of a stretch of an eastern italian alpine valley

The morphological evolution of a stretch of an alpine valley located in the Eastern Italian Alps is described. This has been conditioned by a great alluvial fan that was formed as a consequence of interconnected events, deriving from large rockfalls which occurred in the late glacial period at the head of the Missiaga–Bordina valley, on the left side of the Agordo basin. The aggradation of the alluvial fan blocked the Cordevole valley south of the Agordo basin and produced a lake that is documented by lacustrine sediments. Age determination by ¹⁴C techniques on wood remnants found in these sediments fixes the life of the lake at between approximately 5880 and 5300 years BP . This represents, indirectly, the age of the main phase of the development of the fan. After the building up of the alluvial fan, an erosional phase began, leading to the formation of the present landscape. A series of illustrations depicts the sequence of the fan's development.     

Stratigraphy and sedimentology of a dry to wet eolian depositional system, Burns formation, Meridiani Planum, Mars

Outcrop exposures of sedimentary rocks at the Opportunity landing site (Meridiani Planum) form a set of genetically related strata defined here informally as the Burns formation. This formation can be subdivided into lower, middle, and upper units which, respectively, represent eolian dune, eolian sand sheet, and mixed eolian sand sheet and interdune facies associations. Collectively, these three units are at least 7 m thick and define a “wetting-upward” succession which records a progressive increase in the influence of groundwater and, ultimately, surface water in controlling primary depositional processes.The Burns lower unit is interpreted as a dry dune field (though grain composition indicates an evaporitic source), whose preserved record of large-scale cross-bedded sandstones indicates either superimposed bedforms of variable size or reactivation of lee-side slip faces by episodic (possibly seasonal) changes in wind direction. The boundary between the lower and middle units is a significant eolian deflation surface. This surface is interpreted to record eolian erosion down to the capillary fringe of the water table, where increased resistance to wind-induced erosion was promoted by increased sediment cohesiveness in the capillary fringe. The overlying Burns middle unit is characterized by fine-scale planar-laminated to low-angle-stratified sandstones. These sandstones accumulated during lateral migration of eolian impact ripples over the flat to gently undulating sand sheet surface. In terrestrial settings, sand sheets may form an intermediate environment between dune fields and interdune or playa surfaces. The contact between the middle and upper units of the Burns formation is interpreted as a diagenetic front, where recrystallization in the phreatic or capillary zones may have occurred. The upper unit of the Burns formation contains a mixture of sand sheet facies and interdune facies. Interdune facies include wavy bedding, irregular lamination with convolute bedding and possible small tepee or salt-ridge structures, and cm-scale festoon cross-lamination indicative of shallow subaqueous flows marked by current velocities of a few tens of cm/s. Most likely, these currents were gravity-driven, possibly unchannelized flows resulting from the flooding of interdune/playa surfaces. However, evidence for lacustrine sedimentation, including mudstones or in situ bottom-growth evaporites, has not been observed so far at Eagle and Endurance craters.Mineralogical and elemental data indicate that the eolian sandstones of the lower and middle units, as well as the subaqueous and eolian deposits of the Burns upper unit, were derived from an evaporitic source. This indirectly points to a temporally equivalent playa where lacustrine evaporites or ground-water-generated efflorescent crusts were deflated to provide a source of sand-sized particles that were entrained to form eolian dunes and sand sheets. This process is responsible for the development of sulfate eolianites at White Sands, New Mexico, and could have provided a prolific flux of sulfate sediment at Meridiani. Though evidence for surface water in the Burns formation is mostly limited to the upper unit, the associated sulfate eolianites provide strong evidence for the critical role of groundwater in controlling sediment production and stratigraphic architecture throughout the formation.     

Holocene profile changes along a California coastal stream

Walker Creek in Marin County, California is a coastal stream draining to Tomales Bay, which lies in the San Andreas Rift Zone. Its valley contains an alluvial fill with a basal gravel dated at 5000 years BP. In upstream parts of the watershed, channels are incised arroyo-like in the fill leaving the valley floor standing as a high terrace averaging 5·5 m (18 ft) high. Below this terrace is an inner terrace of historic age that stands 2·4 m (8 ft) above the streambed. The stratigraphy and morphology of this valley are seen in others nearby, and indicate that in the last half of Holocene time in this region a single episode of valley alluviation was followed by two episodes of valley cutting. The second episode of valley cutting is occurring in the present time. During the last 60 years the flow has become seasonal, the stream has incised 1·5 m (5 ft) below the inner terrace in upstream reaches, aggraded 1·2 m (4 ft) in downstream reaches, and extended its estuary. Incision upstream has begun to re-expose the bedrock valley floor and is associated with aggradation downstream that has caused the flood plain to overtop both terraces. This has decreased the stream's gradient. Using a stream that is currently effecting major changes in its valley and channel morphology, two aspects of hydraulic adjustment in fluvial systems are examined. The changes in the average slope of the longitudinal profile are small but measureable. Profile concavity has not changed measurably. The various profiles that have existed in Holocene time show that stream gradient can be, but is not necessarily, slightly adjusted during valley filling and cutting. Flow measurements at a high discharge show that the channel has begun to assume the hydraulic geometry of an ephemeral channel. Adjustments of depth, velocity, and roughness appear to be hydraulic adjustments in response to changing watershed conditions.     

Late Holocene channel and floodplain development in a wandering gravel‐bed river: the River South Tyne at Lambley,northern England

Geomorphological analyses of the morphology, lithostratigraphy and chronology of Holocene alluvial fills in a 2·75 km long piedmont reach of the wandering gravel‐bed River South Tyne at Lambley in Northumberland, northern England, have identified spatial and temporal patterns of late Holocene channel and floodplain development and elucidated the relationship between reach‐ and subreach‐scale channel transformation and terrace formation. Five terraced alluvial fills have been dated to periods sometime between c. 1400 BC –AD 1100, AD 1100–1300, AD 1300–1700, AD 1700–1850 and from AD 1850 to the present. Palaeochannel morphology and lithofacies architecture of alluvial deposits indicate that the past 3000 years has been characterized by episodic channel and floodplain change associated with development and subsequent recovery of subreach‐scale zones of instability which have been fixed in neither time nor space. Cartographic and photographic evidence spanning the past 130 years suggests channel transformation can be accomplished in as little as 50 years. The localized and episodic nature of fluvial adjustment at Lambley points to the operation of subreach‐scale controls of coarse sediment transfers. These include downstream propagation of sediment waves, as well as internal controls imposed by differing valley floor morphology, gradient and boundary materials. However, the preservation of correlated terrace levels indicates that major phases of floodplain construction and entrenchment have been superimposed over locally complex patterns of sediment transfer. Reach‐scale lateral and vertical channel adjustments at Lambley appear to be closely related to climatically driven changes in flood frequency and magnitude, with clusters of extreme floods being particularly important for accomplishing entrenchment and reconfiguring the pattern of localized instability zones. Confinement of flood flows by valley entrenchment, and contamination of catchment river courses by metal‐rich fine sediments following recent historic mining operations, have combined to render the South Tyne at Lambley increasingly sensitive to changes in flood regimes over the past 1000 years. Copyright © 2000 John Wiley & Sons, Ltd.     

Revisiting Triassic stratigraphy of the Yanshan belt

Age determinations of the Triassic lithostratigraphic units of the Yanshan belt were previously based on plant fossils and regional correlations of lithologies. The Liujiagou and Heshanggou Formations were assigned as the Lower Triassic, and the Ermaying Formation was regarded as the Middle Triassic. We carried out a geochronologic study of detrital zircon grains from the Triassic sandstone in the Xiabancheng and Yingzi basins in northern Hebei where the Triassic strata are exceptionally well preserved. The results show that the Liujiagou, Heshanggou, and Ermaying Formations are all Late Triassic in age. The ages of detrital zircons also revealed that the upper part of the Shihezi Formation and the overlying Sunjiagou Formation, both of which were thought to be the Middle-Late Permian units, are actually late Early to Middle Triassic deposits. This study combines the upper Shihezi and Sunjiagou Formations into a single unit termed as the Yingzi Formation. We also substitute the widely-used Liujiagou, Heshanggou, and Ermaying Formations with the Dingjiagou, Xiabancheng, and Huzhangzi Formations, respectively. Field observations and facies analysis show that the top of the Shihezi Formation is an erosive surface, marking a parallel unconformity between the Middle Permian and Lower Triassic. The Yingzi Formation is composed mainly of meandering river deposits, indicative of tectonic quiescence and low-relief landform in the Early to Middle Triassic. In contrast, the Dingjiagou, Xiabancheng, and Huzhangzi Formations are interpreted as the deposits of sandy/gravelly braided rivers, alluvial fans, fan deltas, and deep lakes in association with volcanism, thus indicating an intense rifting setting. A new Triassic lithostratigraphic division is proposed according to age constraints and facies analysis, and the results are of significance for understanding the early Mesozoic tectonic evolution of the Yanshan belt.     

Luminescence dating of an Upper Pleistocene alluvial fan and aeolian sandsheet complex: The Senne in the Münsterland Embayment,NW Germany

An up to 15 m thick alluvial fan and aeolian sandsheet complex is exposed in the upper Senne area, on the southern slope of the Teutoburger Wald Mountains (NW Germany). The origin and age of these deposits have been controversially discussed for many years, ranging from Saalian glaciofluvial to periglacial Weichselian deposits. In order to provide a high-resolution chronological framework for the deposits, we conducted luminescence dating of 12 samples from two localities (Oerlinghausen and Augustdorf pits). Both coarse-grain potassium-rich feldspar and quartz minerals were used for luminescence dating. Feldspar was measured using an elevated temperature post-IR infrared stimulated luminescence (IRSL). Quartz was measured using optically stimulated luminescence (OSL) with a conventional single aliquot regenerative dose (SAR) protocol. Feldspar results tend to overestimate quartz ages for the lower part of the sections (alluvial plain and alluvial fan facies) but are consistent with quartz ages for the upper part of the sections (aeolian facies). Quartz ages from both central and minimum age models suggest deposition during the Late Pleistocene Pleniglacial to Late Glacial.     

Hydrodynamics of floodplain wetlands in a chalk catchment: The River Lambourn, UK

Variations in floodplain channel water levels and valley floor groundwater levels (measured in piezometers and boreholes) are examined at selected points along the course of the River Lambourn, a chalk river in southern England. A local alluvial gravel aquifer in the valley bottom is associated with numerous small wetlands that extend over much of the river's perennial profile. Variations in hydraulic gradient between local borehole levels and/or floodplain channel water levels are described for three sites in the seasonal section of the channel at Bockhampton, East Garston and West Shefford. The results indicate that observed groundwater levels are closely associated with flows from discrete springs at the margins of the channel and floodplain. However, as the floodplain widens and the alluvial gravel aquifer increases in size, the gravel aquifer accounts for a substantial down-valley component of groundwater flow with a diffuse vertical water flux. In the lower catchment, the exchange of flows between the gravel aquifer and the river enables some attenuation of floodplain water-table variability, providing a stable hydrological regime for valley-bottom wetlands. Catchment controls upon the local, valley-bottom, wetland regime are demonstrated with the application of a simple groundwater model developed using MODFLOW. The model is used to simulate groundwater discharge to the river in the upper and lower catchment, in addition to the water level regime at selected points in the valley bottom in the lower catchment. The results demonstrate the importance of taking catchment-scale water flow into account when managing isolated wetlands in a permeable catchment.     

Distinguishing between debris flows and hyperconcentrated flows: an example from the eastern Swiss Alps

Much research has been done on water‐rich mass flows, but the distinction between hyperconcentrated flows and debris flows, and whether the two are indeed different processes, continue to be debated. Here, we contribute to the ongoing discussion of these phenomena by describing and interpreting the deposit of a large landslide‐induced mass flow in the eastern Swiss Alps. About 9400 years ago, 10‐12 km³ of limestone detached from the wall of the Vorderrhein River valley and rapidly fragmented while sliding towards the valley bottom. The rock mass struck the valley floor with enormous force and liquefied at least 1 km³ of valley‐fill sediments. A slurry of liquefied sediment – the ‘Bonaduz gravel’ – traveled tens of kilometres down the Vorderrhein valley from the impact site, carrying huge fragments of rockslide debris that became stranded on the valley floor, forming hills termed ‘tomas’. Part of the flow was deflected by a cross‐valley barrier and traveled 14 km up a tributary of the Vorderrhein valley. The Bonaduz gravel is >65 m thick and fines upward from massive sandy cobble gravel at its base to silty sand at its top. Sedimentologic and geomorphic evidence indicates that Bonaduz gravel was transported as a hyperconcentated flow, likely above a basal carpet of coarse diamictic sediment that behaved as a debris flow. The large amount of water involved in the flow indicates that at least part of the Flims rockslide entered a lake. The Bonaduz deposit shares many properties with sediments left by hyperconcentrated flows generated in flumes, including normal grading and elutriation pipes produced by the rapid escape of fluids when the flow comes to rest. These properties are characteristic of non‐Newtonian laminar flows with high sediment concentrations. Our study reinforces laboratory and theoretical studies showing that debris flows and hyperconcentrated flows are different processes. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

济阳坳陷第三系隐蔽藏储层预测配套技术

利用沉积学、层序地层学理论分析和研究沉积相特征,得出探区内发育的储层主要有冲积扇、河流、三角洲、浊积扇和滩坝五大沉积体系,提出了上第三系”水流控砂”、下第三系”坡槽控砂”的沉积模式,得到储层按构造带分布的规律.隐蔽性油气藏以”断导”模式成藏,与储层发育相匹配形成四个大的隐蔽性油气藏群.研究地震储层描述方法的适应性和敏感性,利用正、反演类比方法研究地震反射特征,实现了地震相和沉积相的转换.剖析典型的油气藏类型,分析成功的经验,总结失败的教训,得到了针对河流、冲积扇、三角洲、滩坝和浊积扇的描述流程和配套技术系列.     

A Pliocene shoaling basaltic seamount: Ba Volcanic Group at Rakiraki, Fiji

At Rakiraki in northeastern Viti Levu, the Pliocene Ba Volcanic Group comprises gently dipping, pyroxene-phyric basaltic lavas, including pillow lava, and texturally diverse volcanic breccia interbedded with conglomerate and sandstone. Three main facies associations have been identified: (1) The primary volcanic facies association includes massive basalt (flows and sills), pillow lava and related in-situ breccia (pillow-fragment breccia, autobreccia, in-situ hyaloclastite, peperite). (2) The resedimented volcaniclastic facies association consists of bedded, monomict volcanic breccia and scoria lapilli-rich breccia. (3) The volcanogenic sedimentary facies association is composed of bedded, polymict conglomerate and breccia, together with volcanic sandstone and siltstone-mudstone facies. Pillow lava and coarse hyaloclastite breccia indicate a submarine depositional setting for most of the sequence. Thick, massive to graded beds of polymict breccia and conglomerate are interpreted as volcaniclastic mass-flow deposits emplaced below wave base. Well-rounded clasts in conglomerate were reworked during subaerial transport and/or temporary storage in shoreline or shallow water environments prior to redeposition. Red, oxidised lava and scoria clasts in bedded breccia and conglomerate also imply that the source was partly subaerial. The facies assemblage is consistent with a setting on the submerged flanks of a shoaling basaltic seamount. The coarse grade and large volume of conglomerate and breccia reflect the high supply rate of clasts, and the propensity for collapse and redeposition on steep palaeoslopes. The clast supply may have been boosted by vigorous fragmentation processes accompanying transition of lava from subaerial to submarine settings. The greater proportion of primary volcanic facies compared with resedimented volcaniclastic and volcanogenic sedimentary facies in central and northwestern exposures (near Rakiraki) indicates they are more proximal than those in the southeast (towards Viti Levu Bay). The proximal area coincides with one of two zones where NW-SE-trending mafic dykes are especially abundant, and it is close to several, small, dome-like intrusions of intermediate and felsic igneous rocks. The original surface morphology of the volcano is no longer preserved, though the partial fan of bedding dip azimuths in the south and east and the wide diameter (exceeding 20 km) are consistent with a broad shield.     

Sediment storage and transport in Pancho Rico Valley during and after the Pleistocene‐Holocene transition,Coast Ranges of central California (Monterey County)

Factors influencing sediment transport and storage within the 156·6 km² drainage basin of Pancho Rico Creek (PRC), and sediment transport from the PRC drainage basin to its c. 11 000 km² mainstem drainage (Salinas River) are investigated. Numeric age estimates are determined by optically stimulated luminescence (OSL) dating on quartz grains from three sediment samples collected from a ‘quaternary terrace a (Qta)’ PRC terrace/PRC‐tributary fan sequence, which consists dominantly of debris flow deposits overlying fluvial sediments. OSL dating results, morphometric analyses of topography, and field results indicate that the stormy climate of the Pleistocene‐Holocene transition caused intense debris‐flow erosion of PRC‐tributary valleys. However, during that time, the PRC channel was backfilled by Qta sediment, which indicates that there was insufficient discharge in PRC to transport the sediment load produced by tributary‐valley denudation. Locally, Salinas Valley alluvial stratigraphy lacks any record of hillslope erosion occurring during the Pleistocene‐Holocene transition, in that the alluvial fan formed where PRC enters the Salinas Valley lacks lobes correlative to Qta. This indicates that sediment stripped from PRC tributaries was mostly trapped in Pancho Rico Valley despite the relatively moist climate of the Pleistocene‐Holocene transition. Incision into Qta did not occur until PRC enlarged its drainage basin by c. 50% through capture of the upper part of San Lorenzo Creek, which occurred some time after the Pleistocene‐Holocene transition. During the relatively dry Holocene, PRC incision through Qta and into bedrock, as well as delivery of sediment to the San Ardo Fan, were facilitated by the discharge increase associated with stream‐capture. The influence of multiple mechanisms on sediment storage and transport in the Pancho Rico Valley‐Salinas Valley system exemplifies the complexity that (in some instances) must be recognized in order to correctly interpret terrestrial sedimentary sequences in tectonically active areas. Copyright © 2009 John Wiley & Sons, Ltd.     

EXTRACTING FEATURES OF ALLUVIAL FAN AND DISCUSSING LANDFORMS EVOLUTION BASED ON HIGH-RESOLUTION TOPOGRAPHY DATA: TAKING ALLUVIAL FAN OF LAOHUSHAN ALONG HAIYUAN FAULT ZONE AS AN INSTANCE

Range-front alluvial fan deposition in arid and semiarid environments records vast amounts of climatic and tectonic information. Differentiating and characterizing alluvial fan morphology is an important part in Quaternary alluvial fan research. Traditional method such as field observations is a most important part of deciphering and mapping the alluvial fan. Large-scale automatically mapping of alluvial fan stratigraphy before traditional field observations could provide guidance for mapping alluvial fan morphology, thus improving subsequent field work efficiency. In this research, high-resolution topographic data were used to quantify relief and roughness of alluvial fan within the Laohushan. These data suggest that mean surface roughness plotted against the size of the moving window is characterized by an initial increase in surface roughness with increased window size, but it shows no longer increase as a function of windows size. These data also suggest that alluvial fans in this study site smooth out with time until a threshold is crossed where roughness increases at greater wavelength with age as a result of surface runoff and headward tributary incision into the oldest surfaces which suggests the evolution process of alluvial fan. Researchers usually differentiate alluvial morphology by mapping characteristics of fan surface in the field by describing surface clast size, rock varnish accumulation, and desert pavement development and analysis of aerial photographs or satellite imagery. Recently, the emergence of high-resolution topographic data has renewed interest in the quantitative characterization of alluvial and colluvium landforms. Surface morphology that fan surface initially tends to become smoother with increasing age due to the formation of desert pavement and the degradation of bar-and-swale topography and subsequently, landforms become more dissected due to tectonics and climatic change induced increased erosion and channelization of the surface with time is widely used to distinguish alluvial fan types. Those characteristics would reflect various kinds of morphology metrics extracted from high-resolution topographic data. In the arid and semiarid regions of northwestern China, plenty of alluvial fans are preserved completely for lack of artificial reforming, and there exists sparse surface vegetation. In the meantime, range-front alluvial fan displaced by a number of active faults formed a series of dislocated landforms with different offsets which is a major reference mark in fault activity research. In this research, six map units(Qf₆-Qf₁), youngest to oldest, were observed in the study area by mapping performed by identifying geomorphic features in the field that are spatially discernible using hill-shade and digital orthophoto map. Alluvial fan relief and roughness were computed across multiple observation scales(2m×2m to 100m×100m)based on the topographic parameters of altitude difference and standard deviation of slope, curvature and aspect. In this research, mean relief keeps increasing with increased window size while mean surface roughness is characterized by a rapid increase over wavelengths of 6~15m, representing the typical length scale of bar-and-swale topography. At longer wavelengths, surface roughness values increase by only minor amounts, suggesting the topographic saturation length is 6~15m for those fan surfaces in which saturation length of standard deviation of curvature is less than 8m. Box and whisker plot of surface roughness averaged over 8m² for each alluvial fan unit in the study area suggests that the pattern of surfaces smoothing out with age and then starting to become rougher again as age increases further beyond Qf₄ or Qf₃ unit. The younger alluvial fan is characterized by prominent bar-and-swale while the older alluvial fan is characterized by tributaries headward incision. Cumulative frequency distributions of relief and surface roughness in Figure 8 are determined in an 8m by 8m moving window for the comparison of six alluvial fan units in the northeast piedmont of Laohushan. From these distributions we know that Qf₆ and Qf₁ reflect the prominent relief which is related to bar-and-swale and tributaries headward incision respectively, while Qf₄ and Qf₃ reflect the moderate relief which is related to subdued topography. Surface roughness, in addition to facilitating the characterization of individual fan units, lends insight to alluvial landform development. We summarize an alluvial landform evolutionary scheme which evolves four stages depending on characteristics of alluvial fan morphology development and features of relief and roughness. The initial stage in this study site is defined as the active alluvial fan channels with bars of coarse cobbles and boulders and swales consisting of finer-grained pebbles and sand which could be reflected by high mean relief and mean roughness values. As time goes, bar-and-swale topography is still present, but an immature pavement, composed of finer grained clasts, has started to form. In the third stage, the bar-and-swale topography on the fan surface is subdued, yet still observable, with clasts ranging from pebbles to cobbles in size and there exists obvious headward tributary incision. Eventually, tributary channels form from erosion by surface runoff. Headward incision of these tributaries wears down the steep walls of channels that are incised through the stable, planar surface, transforming the oldest alluvial landforms into convex hillslopes, leaving only small remnants of the planar surface intact. Those evolutionary character suggests that alluvial fans in this area smooth out with time, however, relief or roughness would be translated to increase at greater wavelength with age until a threshold is crossed. This research suggests that relief and roughness calculated from high-resolution topographic data of this study site could reflect alluvial fan morphology development and provide constraint data to differentiate alluvial fan unit.     

Rhyolitic fallout and pyroclastic density current deposits from a phreatoplinian eruption in the eastern Aegean Sea, Greece

The Kos Plateau Tuff consists of pyroclastic deposits from a major Quaternary explosive rhyolitic eruption, centred about 10 km south of the island of Kos in the eastern Aegean, Greece. Five main units are present, the first two (units A and B) were the product of a phreatoplinian eruption. The eruption style then changed to `dry' explosive style as the eruption intensity increased forming a sequence of ignimbrites and initiating caldera collapse. The final waning phase returned to phreatomagmatic eruptive conditions (unit F). The phreatomagmatic units are fine grained, poorly sorted, and dominated by blocky vitric ash, thickly ash-coated lapilli and accretionary lapilli. They are non-welded and were probably deposited at temperatures below 100°C. All existing exposures occur at distances between 10 km and 40 km from the inferred source. Unit A is a widespread (>42 km from source), thin (upwind on Kos) to very thick (downwind), internally laminated, dominantly ash bed with mantling, sheet-like form. Upwind unit A and the lower and middle part of downwind unit A are ash-rich (ash-rich facies) whereas the upper part of downwind unit A includes thin beds of well sorted fine pumice lapilli (pumice-rich facies). Unit A is interpreted to be a phreatoplinian fall deposit. Although locally the bedforms were influenced by wind, surface water and topography. The nature and position of the pumice-rich facies suggests that the eruption style alternated between `wet' phreatoplinian and `dry' plinian during the final stages of unit A deposition.Unit B is exposed 10–19 km north of the inferred source on Kos, overlying unit A. It is a thick to very thick, internally stratified bed, dominated by ash-coated, medium and fine pumice lapilli in an ash matrix. Unit B shows a decrease in thickness and grain size and variations in bedforms downcurrent that allow definition of several different facies and laterally equivalent facies associations. Unit B ranges from being very thick, coarse and massive or wavy bedded in the closest outcrops to source, to being partly massive and partly diffusely stratified or cross-bedded in medial locations. Pinch and swell, clast-supported pumice layers are also present in medial locations. In the most distal sections, unit B is stratified or massive, and thinner and finer grained than elsewhere and dominated by thickly armoured lapilli. Unit B is interpreted to have been deposited from an unsteady, density stratified, pyroclastic density current which decelerated and progressively decreased its particle load with distance from source. Condensation of steam during outflow of the current promoted the early deposition of ash and resulted in the coarser pyroclasts being thickly ash-coated. The distribution, texture and stratigraphic position of unit B suggest that the pyroclastic density current was generated from collapse of the phreatoplinian column following a period of fluctuating discharge when the eruptive activity alternated between `wet' and `dry'. The pyroclastic density current was transitional in particle concentration between a dilute pyroclastic surge and a high particle concentration pyroclastic flow. Unidirectional bedforms in unit B suggest that the depositional boundary was commonly turbulent and in this respect did not resemble conventional pyroclastic flows. However, unit B is relatively thick and poorly sorted, and was deposited more than 19 km from source, implying that the current comprised a relatively high particle concentration and in this respect, did not resemble a typical pyroclastic surge.