A new sampler for extracting bed material sediment from sand and gravel beds in navigable rivers

Grain‐size distributions of bed material sediment in large alluvial rivers are required in various scientific and management applications, but characterizing gravel beds in navigable rivers is hampered by difficulties in sediment extraction. The newly developed and preliminarily tested sampler reported here can extract sediment from a range of riverbeds. The 36 × 23 × 28 cm stainless steel toothed sampler is deployed from and dragged downstream by the weight of a jet boat, and it improves upon previous samplers that are unable to penetrate gravel bed surfaces, have small apertures, and/or cannot retain fine sediment. The presented sampler was used to extract 167 bed material sediment samples of up to 16 kg (dry weight) with an average sample size of ～6 kg from 67 cross‐sections spanning 160 river kilometres along the Sacramento River. It was also tested at three sites on a subaerial bar to compare surface, subsurface, and sampler distributions. Sampler penetration is ～5 cm. The device collects individual samples that satisfy the criterion for bed material sediment whereby the largest particle comprises no more than 5% of the total sample mass in gravel and sand beds, except where the degree of surface armouring is large (e.g. armor ratios >> 2) and where more than 10% of bed material sediment is composed of grains larger than 64 mm. When aggregated samples exceed 15 kg, all satisfy the criterion whereby the largest particle comprises no more than 1% of the total sample mass. Samples closely resemble surface size distributions, except where armouring is strong. The sampler should be subject to more rigorous field testing, but many of its current limitations are expected to become negligible with the advent a larger, heavier version of the sampling device. Copyright © 2008 John Wiley & Sons, Ltd.     

Burst-like sediment suspension events in a sand bed river

In a much quoted paper, Jackson (1976) hypothesized that turbulent [bursting] motions such as those documented in laboratory boundary layers play a major role in alluvial sediment suspension. To date, the hypothesis remained largely untested, due to difficulties in monitoring turbulent suspension in rivers. This study provides field data documenting burst-like turbulent motions over a sandy bed channel and quantifying the role of these motions in sand suspension. The data were collected in a 10 m deep channel of the Fraser River near Mission, British Columbia, Canada. Turbulent fluctuations of both flow components, downstream and normal to the bed, along with the output of an optical suspended sediment sensor, were monitored 1 m above the river bed. Typical flow velocities averaged 0·9 ms⁻¹ at the sensors, where mean suspended sediment concentrations were 500 mgl⁻¹; decimetre height small dunes on the backs of larger, half-metre amplitude dunes covered the channel bed in the area. Brief but intense, burst-like [ejection and inrush] events were identified in the flow records, where they are responsible for a high degree of [intermittency] in shear stress over the dunes: 80 per cent of the turbulent momentum exchange across the 1 m level can be ascribed to such brief (3-8 s duration) events, active under 12 per cent of the time. In addition, the record of fluctuating sediment concentrations reveals these burst-like motions to be highly effective in vertically mixing suspended sediment and thus, ultimately, in maintaining suspended sediment transport above the dune bed. The bulk (60 and 90 per cent in two deployments) of the vertical sediment mixing was accomplished by intense events active some 10 per cent of the time. No discrete recurrence timescale for these ‘burst-like’ mixing events is evident, however. Rather, a continuous variation of return periods was observed as a function of the magnitude of vertical mixing event considered. To that extent, conceptual models of sediment transport in terms of burst events with a predictable recurrence such as proposed by Jackson (1976) may be misleading.     

Visual characterization technique for gravel‐cobble river bed surface sediments; validation and environmental applications Contribution to the programme of CIRSA (Centre Interuniversitaire de Recherche sur le Saumon Atlantique)

This paper presents an evaluation of the feasibility and the reliability of a visual characterization technique for gravel–cobble river bed surface substrate. Based on principal axis regressions, using phi scale (ϕ), comparisons of visual estimation and grid sampling techniques show that useful predictive relations (R² = 0·78–0·88) exist between visual estimates of the surface d₁₆, d₅₀ and d₈₄ and estimates obtained for the same percentiles with the grid sampling technique. Comparisons of visual estimation and the surface‐bulk sampling technique also indicate a predictive relation (R² = 0·70) between the d₅₀ of the two methods. Trained operators can visually estimate gravel–cobble bed surface d₁₆ to uncertainties of 41 per cent, d₅₀ to 15 per cent and d₈₄ to 11 per cent (for example, there is a 5·5 mm error on a d₈₄ size of 50 mm). Furthermore, evidence shows that if operators are properly trained, a calibration relation for each percentile can be applied independently of operators. This visual characterization allows effective detailed mapping of spatial patterns in substrate size distribution along extensive reaches of gravel‐bed rivers. The technique can be very useful in creating terrain models for various geomorphological, hydrological and biological applications such as the determination of entrainment thresholds, hydraulic roughness and substrate suitability for benthic insects or salmonid habitat. Copyright © 2001 John Wiley & Sons, Ltd.     

Co-evolution of coarse grain structuring and bed roughness in response to episodic sediment supply in an experimental aggrading channel

We use flume experiments to better understand how gravel-bed channels maintain bed surface stability in response to pulses of sediment supply. Bed elevations and surface imagery at high spatial resolutions were used to quantify the co-evolution of surface grain-size distribution (GSD), bed roughness statistics, and bed surface structures (clusters, cells and transverse features). Using a new semi-automated method, we identified individual stone structures over a 2 m × 1 m area throughout the experiments. After an initial coarsening, surface GSD and armouring ratio remained nearly stable as sediment pulses caused net bed aggradation. In contrast, individual grain structures continued to form, increase or decrease in size, and disappear throughout the experiments. The response of the bed to sediment pulses depended on the history of surface roughness evolution and bed surface structure development, as these factors changed much more in response to supply perturbations earlier in the experiments compared to later, even as the bed continued to aggrade. We interpret that the dynamic production and destruction of bed surface structures can act as a ‘buffer’ to sediment supply pulses, maintaining a stable bed surface during aggradation with minimal change in grain size or armouring. © 2019 John Wiley & Sons, Ltd.     

Distribution of organic carbon in bed sediments of Manoa Stream,Oahu, Hawaii

Organic carbon (OC) associated with fluvial bed sediment plays an important role in biotic and abiotic processes operating within drainage basins. Increasingly, there is a need to characterize storage and spatial distributions of OC in aquatic sediments, particularly under-sampled areas like tropical streams. The objectives of this study were to examine in detail the variation of OC concentration with bed sediment grain size, to characterize the influence of grain size variation on relative OC mass storage, and to compare weighted OC values to those in other aquatic sediments worldwide. The study area selected was a third-order dendritic drainage basin developed in a basaltic complex. Bed sediments along a 6 km section of Manoa Stream were systematically sampled every 50 m for a total of 113 sample site locations. Sediments were partitioned into six size fractions (< 2·0 mm) and OC was determined by dry combustion. Data indicate that the OC concentration increases with decreasing grain size, with the greatest values in the < 0·063 mm (silt + clay) fraction, approximately 4·6 times greater than the very coarse sand fraction (1·00–2·00 mm). Robust smoothing techniques illustrated a general decrease in OC concentration downstream for the size fractions < 0·25 mm. Bed sediments were dominated by size fractions coarser than 0·5 mm (80 per cent of the total distribution) and only about 2 per cent in the fractions less than 0·13 mm. Combining information on OC concentration per size fraction and the mass contribution of each fraction to the whole sample, it was observed that fractions coarser than 0·5 mm had eight to 12 times the storage of OC per kilogram of bed sediments than the fractions finer than 0·13 mm. Weighted OC values for Manoa Stream were on average 6·7 g-OC kg−1, and these were similar to those reported in the literature for a variety of sediments in aquatic environments, both freshwater and marine. These data provide important information on the relative mass storage of OC in bed sediments and their longitudinal patterns in a tropical fluvial environment. Copyright © 1999 John Wiley & Sons, Ltd.     

Impact of wastewater discharge on the channel morphology of ephemeral streams

The impact of wastewater flow on the channel bed morphology was evaluated in four ephemeral streams in Israel and the Palestinian Territories: Nahal Og, Nahal Kidron, Nahal Qeult and Nahal Hebron. Channel changes before, during and after the halting of wastewater flow were monitored. The wastewater flow causes a shift from a dry ephemeral channel with intermittent floods to a continuous flow pattern similar to that of humid areas. Within a few months, nutrient‐rich wastewater flow leads to rapid development of vegetation along channel and bars. The colonization of part of the active channel by vegetation increases flow resistance as well as bank and bed stability, and limits sediment availability from bars and other sediment stores along the channels. In some cases the established vegetation covers the entire channel width and halts the transport of bed material along the channel. During low and medium size flood events, bars remain stable and the vegetation intact. Extreme events destroy the vegetation and activate the bars. The wastewater flow results in the development of new small bars, which are usually destroyed by flood flows. Due to the vegetation establishment, the active channel width decreases by up to 700 per cent. The deposition of fine sediment and organic material changed the sediment texture within the stable bar surface and the whole bed surface texture in Nahal Hebron. The recovery of Nahal Og after the halting of the wastewater flow was relatively fast; within two flood seasons the channel almost returned to pre‐wastewater characteristics. The results of the study could be used to indicate what would happen if wastewater flows were introduced along natural desert streams. Also, the results could be used to predict the consequences of vegetation removal as a result of human intervention within the active channel of humid streams. Copyright © 2001 John Wiley & Sons, Ltd.     

Temporal variations in bedload transport rates: The effect of progressive bed armouring

The quantitative bedload transport data that are presently available confirm that the generalized bedload transport rate-stream power relationship is applicable to natural streams. However, the bedload transport rate is not solely dependent upon hydraulic parameters, but also upon the inter-relationship between bed material characteristics and flow properties. Segregation of the surficial bed material, as expressed through the development of an armour coat, limits the availability of transportable material. Under such circumstances observed bedload transport rates are less than the predicted values. The effect which the development of an armoured surface has upon the bedload transport rate is described with reference to bedload and bed material sampling in the Borgne d'Arolla, Valais, Switzerland. The data refer to two periods when the resumption of baseflow conditions following flood events which were of a sufficient magnitude to transport all but the coarsest (0·3–0·5 m) particles on the streambed, provided the opportunity for the bed to adjust to a comparatively stable flow regime. Observed and predicted bedload transport rate-stream power relationships are compared. The theoretical relationship does not adequately describe conditions in some gravel-bed channels, since it fails to take into account the effect which armouring may have upon the supply of transportable material.     

Sediment Yield During Late Glacial and Holocene periods in the Lac Chambon Watershed,Massif Central,France

A sediment budget for the Late Glacial and Holocene periods was calculated for the Lac Chambon watershed which is located in a formerly glaciated temperate crystalline mountain area. It appears that over 15 500 years: (1) 69 per cent of eroded particles have been displaced by gravity processes and then stored within the watershed, compared to 31 per cent that have been displaced by running water and evacuated outward; (2) the mean mechanical erosion due to gravity processes on the slopes amounted to 16·1 ±6 m and only developed on a quarter of the watershed surface, whereas the mean mechanical erosion due to running water amounted 1·24 ± 0·37 m and involved the whole watershed surface. The mean sediment yields due to gravity processes on slopes were 2300 ± 1360, 1770 ± 960 and 380 ± 100 m³ km⁻³ a⁻¹, respectively, for basalts, and basic and acidic trachyandesites. Values of sediment yield due to running water were 49±15, 120±36 and 79±24 m³ km⁻² a⁻¹, respectively, during the Bôlling–Allerôd, the Younger Dryas and the Pre-Boreal–Boreal periods. They were 56±17 and 166±50 m³ km⁻² a⁻¹ during the Sub-Atlantic period before and after 1360 a BP , respectively. These values reflect variations in the natural environment and the impact of human-induced deforestation. © 1997 by John Wiley & Sons, Ltd.     

Deep learning long short-term memory combined with discrete element method for porosity prediction in gravel-bed rivers

The porosity of gravel riverbed material often is an essential parameter to estimate the sediment transport rate, groundwater-river flow interaction, river ecosystem, and fluvial geomorphology. Current methods of porosity estimation are time-consuming in simulation. To evaluate the relation between porosity and grain size distribution (GSD), this study proposed a hybrid model of deep learning Long Short-Term Memory (LSTM) combined with the Discrete Element Method (DEM). The DEM is applied to model the packing pattern of gravel-bed structure and fine sediment infiltration processes in three-dimensional (3D) space. The combined approaches for porosity calculation enable the porosity to be determined through real time images, fast labeling to be applied, and validation to be done. DEM outputs based on the porosity dataset were utilized to develop the deep learning LSTM model for predicting bed porosity based on the GSD. The simulation results validated with the experimental data then segregated into 800 cross sections along the vertical direction of gravel pack. Two DEM packing cases, i.e., clogging and penetration are tested to predict the porosity. The LSTM model performance measures for porosity estimation along the z-direction are the coefficient of determination (R²), root mean squared error (RMSE), and mean absolute error (MAE) with values of 0.99, 0.01, and 0.01 respectively, which is better than the values obtained for the Clogging case which are 0.71, 0.14, and 0.03, respectively. The use of the LSTM in combination with the DEM model yields satisfactory results in a less complex gravel pack DEM setup, suggesting that it could be a viable alternative to minimize the simulation time and provide a robust tool for gravel riverbed porosity prediction. The simulated results showed that the hybrid model of the LSTM combined with the DEM is reliable and accurate in porosity prediction in gravel-bed river test samples.     

PROCESS-BASED MODEL OF GRAIN LIFTING FROM RIVER BED TO ESTIMATE SUSPENDED-SEDIMENT CONCENTRATION IN A SMALL HEADWATER BASIN

Suspended sediment is supplied from river bed sediment in Hiyamizusawa Brook, Hokkaido, Japan, during the early snowmelt season. The stirring up of fine grains from the river bed is an important control of the time variation of suspended-sediment flux. In this stream, about 10 per cent of the river bed is covered with sand sediment, 80 per cent with cobbles and/or pebbles and the remaining 10 per cent is exposed bedrock. A model previously used to explain the stirring up of fine grains within a cobble and pebble bed is applied to a sand bed, with the modification that fine grains in a sand bed are assumed to be stirred up from the tractive layer formed on the surface, whereas those in a cobble and pebble bed are assumed to be stirred up from the gaps formed by the selective movement of pebbles on the river bed. The lift force acting at the river bed is estimated from the bed shear stress, and the maximum grain size capable of being stirred up was calculated from the lift force. Consequently, the amount of fine material stirred up from the river bed is estimated from the grain size distribution of river bed sediment, and the suspended-sediment flux is thus calculated. All stirred-up fines are assumed to become suspended sediment. The simulated time variation of suspended-sediment concentration was similar to that obtained in the field study. The calculated grain size of suspended sediment was also equivalent to the field data.     

Biases of submerged bulk and freeze‐core samples

Freeze‐coring and bulk sampling are routine methods used to sample subsurface spawning gravel under shallow water. Both methods have limitations. Freeze‐coring is not believed to representatively sample coarse grain sizes and the sample volumes are relatively small. Conversely, when bulk sampling, even within an enclosure, some fine sediment is suspended and washed away from the sample. This paper assesses the biases in sampling performance between the two methods and determines whether the loss of fines that occurs when bulk sampling could be predicted and thus corrected for. At six riffles the spawning substrate was sampled under approximately 50 cm of water with a bulk sample and three adjacent freeze‐cores. For each riffle, data from the two samples were combined using the method of Fripp and Diplas (1993) and the resultant composite sample was compared with the original freeze‐core and bulk samples to assess the relative precision and biases of the two techniques. On average, the D₅₀ of the bulk samples was 4 mm larger and a one‐third loss of the <2 mm fraction occurred compared with the composite samples. In contrast, freeze‐core samples contain on average 32% more sediment >16 mm compared with composite samples. Based on six samples, taken from six riffles, the amount of sediment finer than 0·5 mm lost using our bulk sampling technique with an enclosure appears to be predictable and correctable. Copyright © 2005 John Wiley & Sons, Ltd.     

Crust strength: a wind tunnel study of the effect of impact by saltating particles on cohesive soil surfaces

A wind tunnel study examined the effect of distributions of saltating particles on sediment surfaces which were characterized by distributions of their tensile strength. The sediments consisted of varying proportions of large sand‐sized particles with a fine particle cement. The energies of the impacting particles and the surface strengths were compared with the mass of material lost from the surface. It is important to consider distributions of parameters rather than mean values only, since abrasion and erosion may occur from surfaces not predicted from average strength and saltation velocities. At the impact velocities used in this study (mean velocity 4·4 m s^?1, with standard deviation of 0·51), surfaces containing less than 12 per cent fine material were easily eroded, but insignificant erosion occurred when the fine particle content exceeded 60 per cent. Small amounts of cementing material were easily ruptured, allowing the large sand grains to be moved (largely in creep) by the bombarding particles. A significant amount of energy was lost to the bed. As the percentage of fine material increased, the surface became more difficult to break up and less energy was lost to the bed. The probability that erosion will occur for known energy distributions of impacting particles and surface strength can be calculated and the mass loss increases exponentially with a decrease in the percentage of fine cementing particles. Copyright © 2001 John Wiley & Sons, Ltd.     

Effect of saltating sediment on flow resistance and bed roughness in overland flow

The acceleration of saltating grains by overland flow causes momentum to be transferred from the flow to the grains, thereby increasing flow resistance and bed roughness. To assess the impact of saltating sediment on overland flow hydraulics, velocity profiles in transitional and turbulent flows on a fixed sand-covered bed were measured using hot-film anemometry. Five discharges were studied. At each discharge, three flows were measured: one free of sediment, one with a relatively low sediment load, and one with a relatively high sediment load. In these flows from 83 to 90 per cent of the sediment was travelling by saltation. As a result, in the sediment-laden flows the near-bed velocities were smaller and the velocity profiles steeper than those in the equivalent sediment-free flows. Sediment loads ranged up to 87·0 per cent of transport capacity and accounted for as much as 20·8 per cent of flow resistance (measured by the friction factor) and 89·7 per cent of bed roughness (measured by the ratio of the roughness length to median grain diameter). It is concluded that saltating sediment has a considerable impact on overland flow hydraulics, at least on fixed granular beds. Saltation is likely to have a relatively smaller effect on overland flow on natural hillslopes and agricultural fields where form and wave resistance dominate. Still, saltation is generally of greater significance in overland flow than in river flow, and for this reason its effect on overland flow hydraulics is deserving of further study. © 1998 John Wiley & Sons, Ltd.     

How does the bed surface impact low-magnitude bedload transport rates over gravel-bed rivers?

Bedload transport is a complex phenomenon that is not well understood, especially for poorly sorted sediment and low transport rates, which is what is typically found in alpine gravel-bed rivers. In this paper, the interaction between bedload rate, bed stability and flow is investigated using flume experiments. Significant differences in bedload rates were observed for experiments conducted on beds formed with the same gravel material but presenting diverse arrangements and bedforms. Tests were performed under regimes of low transport rate, which are mainly controlled by gravel-bed roughness. Different scales of roughness were identified using the statistical characteristics of detailed bed elevation measurements: grain, structure and large bedform scales. The role played by these different roughness scales in bedload dynamics was examined. For quasi-flat beds, bed stability was quantified using a combination of bed surface criteria describing grain and structure scales. It was found that bed stability affects the bedload rate directly and not only through its influence on the flow or on the incipient motion. For beds with large bedforms, the analysis of bedload dynamics also showed the importance of accounting for effective bed shear stress distributions. An empirical bedload model for low transport regimes was suggested. Compared with previous formulae developed for alpine rivers, this model accounts for bed stability and distribution of effective bed shear stress. It significantly improves the understanding of gravel dynamics over complex beds such as arranged beds or those with large bedforms. However, further tests are needed to use the model outside the range of conditions of this study. © 2019 John Wiley & Sons, Ltd.     

Gully erosion in the Siwalik Hills,Nepal: estimation of sediment production from active ephemeral gullies

A simple field‐based monitoring programme was established in a small catchment (area 4·6 km²) to find the rates of gully erosion in the Siwalik Hills, Nepal. The rates are used to estimate the amount of sediment produced by gully erosion in the catchment. Three large and active gullies were selected with areas ranging from 0·44 to 0·78 ha. Aerial photographs taken in 1964, 1978 and 1992 were ortho‐rectified and used to study the dynamics of gully heads. The same gullies were also monitored manually using an orthogonal reference system fixed by erosion pins around the gully heads. Results from the aerial photos indicated that the gullies expanded remarkably over the period from 1964 to 1992, by 34 to 58 per cent. Head‐retreat rates during that period were 0·48, 0·55 and 0·73 m a^?1 and average annual sediment evacuation was estimated as 2534 ± 171, 959 ± 60 and 2783 ± 118 m³ a^?1 for the three gullies respectively. From the field measurement, estimated volumes were found to vary from 731 ± 57 to 2793 ± 201 m³ a^?1 over the monitoring period of two years. It was also found that the gullies produce sediment which accounts for up to 59 per cent of the sediment produced from surface erosion in the headwater catchment. The findings are useful for planning and executing appropriate control measures and constructing a sediment hazard map at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.     

Effects of Time-dependent Moisture Content of Surface Sediments on Aeolian Transport Rates Across a Beach,Wildwood, New Jersey,U.S.A.

A one-day field investigation on an unvegetated backbeach documents the importance of surface sediment drying to aeolian transport. Surface sediments were well sorted fine sand. Moisture content of samples taken in the moist areas on the backbeach varied from 2·9 to 9·2 per cent. Lack of dry sediment inhibited transport prior to 08:50. By 09:10 conspicuous streamers of dry sand moved across the moist surface. Barchan-shaped bedforms, 30 to 40 mm high and composed of dry sand (moisture content <0·10 per cent), formed where sand streamers converged. The surface composed of dry sand increased from 5 per cent of the area of the backbeach at 09:50 to 90 per cent by 12:50 Mean wind speeds were beetween 5·6 and 8·6 m s⁻¹ at 6 m above the backbeach. Corresponding shear velocities were always above the entrainment threshold for dry sand and below the threshold for the moist sand on the backbeach. Measured rates of sand trapped (by vertical cylindrical traps) increased during the day relative to calculated rates. The measured rate of sand trapped on the moist foreshore was higher than the rate trapped on the backbeach during the same interval, indicating that the moist foreshore (moisture content 18 per cent) was an efficient transport surface for sediment delivered from the dry portion of the beach upwind. Measured rates of sand trapped show no clear relationship to shear velocities unless time-dependent surface moisture content is considered. Results document conditions that describe transport across moist surfaces in terms of four stages including: (1) entrainment of moist sediment from a moist surface; (2) in situ drying of surface grains from a moist surface followed by transport across the surface; (3) entrainment and transport of dry sediment from bedforms that have accumulated on the moist surface; and (4) entrainment of sand from a dry upwind source and transport across a moist downwind surface. © 1997 John Wiley & Sons, Ltd.     

Dust deposition near an eroding source field

Deposition of suspended dust near eroding source fields can have detrimental effects on vegetation, as well as on soil and water quality. This study was undertaken to quantify dust deposition within 200 m of a source field during wind erosion events. Erosion was measured with BSNE samplers on a small field of Amarillo fine sandy loam at field at Big Spring, TX. Suspension‐sized dust discharge averaged 33 ± 5 per cent of the total sediment discharge and ranged from 18·0 to 147·4 kg m^?1 during eight selected storm events. Within 200 m of the source field boundary, dust collected in deposition samplers placed above a vegetated surface averaged 34 per cent of initial dust discharge. Predicted deposition, according to a line source model, was 43 per cent. Actual deposition was likely near that predicted, because of lateral diffusion of the dust and some under‐sampling by the disk samplers. Thus, the line source model seems useful in estimating both the pattern and quantity of deposition. About 30 per cent of the suspended dust was deposited within the initial 50 m of vegetated surface, but only about 12–15 per cent was deposited in the initial 10 m. Published in 2006 by John Wiley & Sons, Ltd.     

Spatial variability of floodplain sedimentation at the event scale in the Rhine–Meuse delta,The Netherlands

This article addresses spatial variability of comtemporary floodplain sedimentation at the event scale. Measurements of overbank deposition were carried out using sediment traps on 11 floodplain sections along the rivers Waal and Meuse in The Netherlands during the high-magnitude flood of December 1993. During the flood, sand sheets were locally deposited behind a natural levee. At distances greater than 50 to 100 m from the river channel the deposits consisted mainly of silt- and clay-sized material. Observed patterns of deposition were related to floodplain topography and sediment transporting mechanisms. Though at several sites patterns were observed that suggest transport by turbulent diffusion, convection seems the dominant transporting mechanism, in particular in sections that are bordered by minor embankments. The average deposition of overbank fines ranged between 1·2 and 4·0 kg m⁻² along the river Waal, and between 1·0 and 2·0 kg m⁻² along the river Meuse. The estimated total accumulation of overbank fines (not including sand sheets) on the entire river Waal floodplain was 0·24 Mton, which is 19 per cent of the total suspended sediment load transported through the river Waal during the flood. © 1998 John Wiley & Sons, Ltd.     

STEP-POOL MORPHOLOGY IN HIGH-GRADIENT STREAMS

l 1NTRODUCTIONGravel bed rivers are found in man parts of the worid, mpically in moUntainous regions with highgradients and seasonally high flows. These rivers are imPotalt in contrlling flood waters from sPringrunoff in regions such as the Pacific Northwest, Where heaVy snowfall can be followed by equally heaVyranfall. The combination of high stream gradient and high discharge causes significant erosion of thebed and bank of the strCam, in some cases moving large boulders with ease.It…     

Flash-flood and bedload dynamics of desert gravel-bed streams

Comparatively little is known about the hydrology of desert flash-floods despite the extent of the world's drylands. There is even less known about their sedimentary behaviour and particularly about the movement of coarse material as bedload. The results of an intense field monitoring programme carried out on an ephemeral gravel-bed stream in the northern Negev Desert are presented. In this semi-arid setting, flow duration analysis indicates that the channel is hydrologically active for 2% of the time, or about seven days per year, and that overbank flow can be expected for only 0·03% of the time—about three hours per year. Multipeaked flood hydrographs are the norm, reflecting many factors including the arrival of separate slugs of discharge from contributing subcatchments. The passage of the initial flood bore is surprisingly slow, but the rising limb of the flood hydrograph is rapid with a median time of rise of 10 minutes, in keeping with expected flash-flood behaviour. Bedload flux is high, averaging 2·67 kg s⁻¹ m⁻¹ during the period that the channel carries flow. This gives very high bedload sediment yield despite the infrequent and short duration of flood flows and matches the high yield of suspended sediment. The relationship between bedload flux and boundary shear stress is simple, in contrast with perennial gravel-bed streams, and the exponent of the log–log relationship is 1·52. Of great value is that the behaviour of the Nahal Eshtemoa corroborates a pattern established by the authors previously in a smaller tributary stream. © 1998 John Wiley & Sons, Ltd.