Geometry of trapezoidal fan deltas and their relationship to extensional faulting along the southwestern active margins of the Corinth rift, Greece

A new subtype of Gilbert-type fan deltas, ‘the trapezoidal fan delta’, characterized by the absence of bottomset deposits, is recognized in the south-western active margins of the Corinth rift in central Greece. They are formed adjacent to master extensional listric faults and developed by progradation either onto a subaqueous basin escarpment or across a subaerial platform where alluvial fans have accumulated. Simultaneously with master fault activity, displacements on counter faults along intrabasinal basement highs produced fan delta foreset deposits. Furthermore, footwall imbrication and uplift along the listric faults, as well as transfer fault displacement, have strongly influenced the pattern of fan delta sedimentation.     

Relay ramp evolution and mass flow deposition (Upper Kimmeridgian–Lower Volgian) in the Tail End Graben, Danish North Sea

The Central Graben in the Danish North Sea sector consists of a series of N–S to NW–SE trending, eastward‐tilted half‐grabens, bound to the east by the Coffee Soil Fault zone. This fault zone has a complex Jurassic history that encompasses at least two fault populations; N–S to NNW–SSE striking faults active in the Late Aalenian–Early Oxfordian, and NNW–SSE to WNW–ESE striking faults forming in Late Kimmeridgian time (sensu gallico), following a short period of tectonic quiescence. Sediment transport across the Coffee Soil Fault zone was controlled by fault array evolution, and in particular the development of relay ramps that formed potential entry points for antecedent drainage systems from the Ringkøbing–Fyn High east of the rift. Fault and isochore trends of the Upper Kimmeridgian–Lower Volgian succession in the northeast Danish Central Graben show that accommodation space was initially generated close to several minor, isolated or overlapping faults. Subsidence became focused along a few master faults in the Early Volgian through progressive linkage of selected faults. Seismic time isochore geometries, seismic facies, amplitude trends and well ties indicate the presence of coarse clastic lithologies locally along the fault zone. The deposits probably represent submarine mass flow deposits supplied from footwall degradation and possibly also from the graben hinterland via a relay ramp. The latter source appears to have been cut off as the relay ramp was breached and the footwall block are uplifted. Fault growth and linkage processes thus controlled the spatial and temporal trends of accommodation space generation and sediment supply to the rift basin.     

Impact of faulting in depocentres development,facies assemblages,drainage patterns,and provenance in continental half-graben basins: An example from the Fanja Basin of Oman

Fault throw gradients create transverse folding, and this can influence accommodation creation and sedimentary routing and infill patterns in extensional half-graben basin. The Fanja half-graben basin (Oman) offers an excellent outcrop of an alluvial fan succession displaying cyclical stacking and basin-scale growth-fold patterns. These unique conditions allow for an investigation of fault-timing and accommodation development related to fault-transverse folding. Our study combines geological mapping, structural analysis, sedimentary logging and correlation, and bulk mineralogical compositions. Mapping reveals that the basin is bounded by a regional-scale fault, with local depocentres changing position in response to transverse syncline and anticline development ascribed to fault-displacement gradients. The alluvial Qahlah Formation (Late Cretaceous) is unconformably overlying the Semail Ophiolite, and is in turn overlain by the marine Jafnayn Formation (Late Palaeocene). Facies and stratigraphic analysis allows for subdivision of the Qahlah Formation into four informal units, from base to top: (i) laterite in topographic depressions of the ophiolite, (ii) greenish pebbly sandstones, deriving from axially draining braided streams deposited in the low-relief half-graben basin. This green Qahlah grades vertically into the red Qahlah, formed by alluvial fanglomerates and floodplain mudstones, with drainage patterns changing from fault-transverse to fault-parallel with increasing distance to the main fault. The red Qahlah can be divided into (iii) the Wadi al Theepa member, found in a western basin depocentre, with higher immaturity and sand: mud ratio, suggesting a more proximal source, and (iv) the Al Batah member, located in the eastern part of the basin. The latter shows better sorting, a lower sand: mud ratio, and more prominent graded sub-units. It also shows eastward expansion from an orthogonal monocline, ascribed to accommodation developed in a relay ramp. Changes in sedimentary facies and depositional patterns are consistent with differential mineralogical composition. The Green Qahlah is composed of quartz and lithic mafic rock fragments, sourced from the ophiolite and schists of the metamorphic basement. The Red Qahlah is composed of chert and kaolinite sourced from the Hawasina Nappe succession in the footwall of the master fault. These changes in source area are linked to unroofing of fault-footwalls and domal structures during the extensional collapse of the Semail Ophiolite. The novelty of this study resides in linking sedimentology and fault-displacement events controlling fault-perpendicular folding, and its influence on depocentre generation and stratigraphic architecture. This is an approach seldom considered in seismic analysis, and rarely analysed in outcrop studies, thus placing the results from this study among the key outcrop-based contributions to the field.     

Structural and depositional controls on Plio‐Pleistocene submarine channel geometry (Taranaki Basin,New Zealand)

High‐quality 3D seismic data are used to investigate the effect of the Parihaka Fault on the geometry of submarine channels in Northern Graben of the Taranaki Basin, New Zealand. The Parihaka Fault comprises of four segments (S1–S4) with variable displacements. As part of the Plio‐Pleistocene Giant Foresets Formation, the older Channel Complex Systems 1 and 2 reveal a two‐stage evolution: (a) a syn‐tectonic depositional stage with channels incising the slope during early fault growth (ca. 4.5 Ma) and (b) a stage of sediment bypass (ca. 3 Ma) leading to the infill of hanging‐wall depocentres. The Channel Complex System 3 is syn‐tectonic relative to segment S3 and was formed at ca. 2.5 Ma. We show that the successive generation of new fault segments towards the north controlled the formation of depocentres in the study area. This occurred in association to rotation and uplift of the footwall block of the Parihaka Fault and subsidence of its hanging‐wall block, with fault activity controlling the orientation of channel systems. As a result, we observe three drainage types in the study area: oblique, transverse and parallel to the Parihaka Fault. This work is important as it shows that relay zones separating the Parihaka Fault segments had limited influence on the geometry and location of channel systems. Submarine channels were diverted from their original courses close to the Parihaka Fault and flowed transversally to fault segments instead of running through relay ramps, contrasting to what is often recorded in the literature. A plausible explanation for such a discrepancy relates to rapid progradation of the Giant Foresets Formation during the Plio‐Pleistocene, with channel complexes becoming less confined, favouring footwall incision and basinward deposition of submarine fans.     

Modern and ancient fluvial megafans in the foreland basin system of the central Andes, southern Bolivia: implications for drainage network evolution in fold-thrust belts

ABSTRACT Fluvial megafans chronicle the evolution of large mountainous drainage networks, providing a record of erosional denudation in adjacent mountain belts. An actualistic investigation of the development of fluvial megafans is presented here by comparing active fluvial megafans in the proximal foreland basin of the central Andes to Tertiary foreland‐basin deposits exposed in the interior of the mountain belt. Modern fluvial megafans of the Chaco Plain of southern Bolivia are large (5800–22 600 km²), fan‐shaped masses of dominantly sand and mud deposited by major transverse rivers (Rio Grande, Rio Parapeti, and Rio Pilcomayo) emanating from the central Andes. The rivers exit the mountain belt and debouch onto the low‐relief Chaco Plain at fixed points along the mountain front. On each fluvial megafan, the presently active channel is straight in plan view and dominated by deposition of mid‐channel and bank‐attached sand bars. Overbank areas are characterized by crevasse‐splay and paludal deposition with minor soil development. However, overbank areas also contain numerous relicts of recently abandoned divergent channels, suggesting a long‐term distributary drainage pattern and frequent channel avulsions. The position of the primary channel on each megafan is highly unstable over short time scales. Fluvial megafans of the Chaco Plain provide a modern analogue for a coarsening‐upward, > 2‐km‐thick succession of Tertiary strata exposed along the Camargo syncline in the Eastern Cordillera of the central Andean fold‐thrust belt, about 200 km west of the modern megafans. Lithofacies of the mid‐Tertiary Camargo Formation include: (1) large channel and small channel deposits interpreted, respectively, as the main river stem on the proximal megafan and distributary channels on the distal megafan; and (2) crevasse‐splay, paludal and palaeosol deposits attributed to sedimentation in overbank areas. A reversal in palaeocurrents in the lowermost Camargo succession and an overall upward coarsening and thickening trend are best explained by progradation of a fluvial megafan during eastward advance of the fold‐thrust belt. In addition, the present‐day drainage network in this area of the Eastern Cordillera is focused into a single outlet point that coincides with the location of the coarsest and thickest strata of the Camargo succession. Thus, the modern drainage network may be inherited from an ancestral mid‐Tertiary drainage network. Persistence and expansion of Andean drainage networks provides the basis for a geometric model of the evolution of drainage networks in advancing fold‐thrust belts and the origin and development of fluvial megafans. The model suggests that fluvial megafans may only develop once a drainage network has reached a particular size, roughly 10⁴ km²– a value based on a review of active fluvial megafans that would be affected by the tectonic, climatic and geomorphologic processes operating in a given mountain belt. Furthermore, once a drainage network has achieved this critical size, the river may have sufficient stream power to prove relatively insensitive to possible geometric changes imparted by growing frontal structures in the fold‐thrust belt.     

Role of fault interactions in controlling synrift sediment dispersal patterns: Miocene, Abu Alaqa Group, Suez Rift, Sinai, Egypt

Although fault growth is an important control on drainage development in modern rifts, such links are difficult to establish in ancient basins. To understand how the growth and interaction of normal fault segments controls stratigraphic patterns, we investigate the response of a coarse-grained delta system to evolution of a fault array in a Miocene half-graben basin, Suez rift. The early Miocene Alaqa delta complex comprises a vertically stacked set of footwall-sourced Gilbert deltas located in the immediate hangingwall of the rift border fault, adjacent to a major intrabasinal relay zone. Sedimentological and stratigraphic studies, in combination with structural analysis of the basin-bounding fault system, permit reconstruction of the architecture, dispersal patterns and evolution of proximal Gilbert delta systems in relation to the growth and interaction of normal fault segments. Structural geometries demonstrate that fault-related folds developed along the basin margin above upward and laterally propagating normal faults during the early stages of extension. Palaeocurrent data indicate that the delta complex formed a point-sourced depositional system developed at the intersection of two normal fault segments. Gilbert deltas prograded transverse into the basin and laterally parallel to faults. Development of the transverse delta complex is proposed to be a function of its location adjacent to an evolving zone of fault overlap, together with focusing of dispersal between adjacent fault segments growing towards each other. Growth strata onlap and converge onto the monoclinal fold limbs indicating that these structures formed evolving structural topography. During fold growth, Gilbert deltas prograded across the deforming fold surface, became progressively rotated and incorporated into fold limbs. Spatial variability of facies architecture is linked to along-strike variation in the style of fault/fold growth, and in particular variation in rates of crestal uplift and fold limb rotation. Our results clearly show that the growth and linkage of fault segments during fault array evolution has a fundamental control on patterns of sediment dispersal in rift basins.     

The interaction between normal faulting and drainage in active extensional basins, with examples from the western United States and central Greece

Faulting exerts an important control upon drainage development in active extensional basins and thus helps determine the architecture of the sedimentary infill to a synrift basin. Examples of the interaction between faulting and drainage from the western United States and central Greece may be grouped into a relatively small number of classes based upon the structural position of a drainage catchment: footwall, hangingwall, fault offset and axial. Our examples illustrate the diversity of erosional effects that might arise because of variations in the spacing, orientation and segmentation of faults and their interactions. Where basement lithology is similar, footwall catchments are generally smaller, shorter and steeper than those of the hangingwall. Footwall-sourced alluvial fans and fan deltas are: generally smaller in area than those sourced from similar lithologies in the hangingwall. Wide fault offsets often give rise to large drainage catchments in the footwall. The development of axial drainage depends upon the breaching of transverse bedrock ridges by headward stream erosion or by lake overflow. Once breaching has occurred the direction of axial stream flow is controlled by the potential developed between basins of contrasting widths. Fault migration and propagation leads to the uplift, erosion and resedimentation of the sedimentary infill to formerly active basins, leading to the cutting of footwall unconformities. The outward sediment flux from structurally controlled catchments is modulated in an important way by lithology and runoff. The greatest contrasts in basement lithology arise when fault migration and propagation have occurred, such that the sedimentary fill to previously active basins is uplifted, incised and eroded by the establishment of large new drainage systems in the footwalls of younger faults. Drainage patterns in areas where faults interact can shed light on the relative timing of activity and therefore the occurrence of fault migration and propagation. Facies and palaeocurrent trends in ancient grabens may only be correctly interpreted when observations are made on a length scale of 10–20 km, comparable to that of the largest fault segments.     

Architecture and sedimentary facies evolution of a marine, expanding outer-arc half-graben (Crete, late Miocene)

Vertical trends in architecture and facies of delta systems are preserved in a clastic wedge of an expanding marine half-graben in which tectonics, eustatic sea-level change and climatic change are roughly known from independent evidence. The studied half-graben is situated on Crete (Greece) and part of a larger, E-W-trending extensional domain situated north of the Hellenic subduction zone. The extension seems to be related to the southward migration of the trench (roll-back) in early Late Miocene times. The infill pattern is discussed in the light of theoretical fault-growth models for expanding half-grabens. The geometry of the half-graben fill is typically wedge shaped, with a thickness of nearly 1000 m near the fault scarp thinning to c. 50 m about 20 km away from the scarp. The lower part of the wedge (Stratified Prina Series) contains coarsening-upward units representing progradational, shallow-marine deltas. At the base of the wedge these units are thin and retrogradationally stacked. Upwards in the succession, the units become composite (coarsening-upward subunits), thicker and finer grained. The composite structure, the thickening and the fining trend is related to progressive increase in accommodation space inherent in fault growth. Rapid deepening of the basin from the photic zone (evidenced by intercalated coral and stromatolite beds) up to a depth of 900 m started at the top of the Stratified Prina Series. The deepening continued over some tens of metres of marly sediments of the base of the Kalamavka Formation and may be related to structural collapse of the fault block. After the structural collapse, basin depth remained more or less constant and basin infilling occurred by progradation of deep-water delta systems. These systems are characterized by a muddy delta slope with channelized conglomerates, and by mainly aggradation of prodelta turbidites deposited in small lobes at the base of slope.     

Late syn‐rift evolution of the Vingleia Fault Complex,Halten Terrace,offshore Mid‐Norway; a test of rift basin tectono‐stratigraphic models

Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.     

Vertical trends within the prograding Salt Wash distributive fluvial system,SW United States

Progradation is an important mechanism through which sedimentary systems fill sedimentary basins. Although a general progradational pattern is recognized in many basins, few studies have quantified system scale spatial changes in vertical trends that record fluvial system progradation. Here, we provide an assessment of the spatial distribution of vertical trends across the Salt Wash distributive fluvial system (DFS), in the Morrison Formation SW, USA. The vertical distribution of proximal, medial and distal facies, and channel belt proportion and thickness, are analysed at 25 sections across approximately 80 000 km² of a DFS that spanned approximately 100 000 km². The stratigraphic signature of facies stacking patterns that record progradation varies depending on location within the basin. An abrupt and incomplete progradation succession dominates the proximal region, whereby proximal deposits directly overlie distal deposits. A more complete succession is preserved in the medial region of the DFS. The medial to distal region of the DFS are either simple aggradational successions, or display progradation of medial over distal facies. Spatial variations in facies successions patterns reflects preservation changes down the DFS. A spatial change in vertical trends of channel belt thickness and proportion is not observed. Vertical trends in channel belt proportion and thickness are locally highly variable, such that systematic up‐section increases in these properties are observed only at a few select sites. Progradation can only be inferred once local trends are averaged out across the entire succession. Possible key controls on trends are discussed at both allocyclic and autocyclic scales including climate, tectonics, eustasy and avulsion. Eustatic controls are discounted, and it is suggested that progradation of the Salt Wash DFS is driven by upstream controls within the catchment.     

Propagation history and passive rotation of mesoscale normal faults: implications for synrift stratigraphic development

Field data from onshore exposures of the Oligo-Miocene Gulf of Suez Rift in the Sinai document the passive rotation of early formed mesoscale synthetic and antithetic faults and associated half-graben due to long-lived activity on large displacement (2–5 km) block-bounding faults. Early formed small-displacement (<350 m) mesoscale antithetic faults and half-graben within regional-scale fault blocks underwent progressive steepening due to footwall uplift, rotational faulting and footwall flexing on large-displacement, block-bounding faults. In contrast, mesoscale synthetic faults were progressively rotated to shallower angles. Analysis of palaeohorizontal surfaces within synrift sediments deposited in half-graben adjacent to the mesoscale faults indicate passive rotations of up to 25° about horizontal axes since deposition. Passive burial and in-filling of early formed mesoscale faults and half-graben by synrift sediments is consistent with extension being transferred from numerous mesoscale faults to few block-bounding macroscale faults as extension preceded. Furthermore, this transfer of extension appears to be associated with a marked change in basin configuration, synrift sediment dispersal patterns and facies development. Identification of early formed, passively rotated normal faults and half-graben is important for correctly reconstructing the early stages of basin palaeogeography and sediment dispersal, and for addressing models of rift basin evolution.     

Quaternary alluvial fan sedimentation in the Dehradun Valley Piggyback Basin, NW Himalaya: tectonic and palaeoclimatic implications

ABSTRACT The Dehradun Valley, a synclinal intermontane valley piggyback basin within the Siwalik Group rocks in the NW Himalaya, is separated from the Lesser Himalayan formations in the north by a major intraplate thrust, the Main Boundary Thrust (MBT) and from the Indogangetic Plains in the south by the Himalayan Frontal Fault (HFF). Major parts of the Dehradun Valley are covered by three fans, from west to east the Donga, Dehradun and Bhogpur fans, deposited by streams following the topography produced by activity of the MBT and probable footwall imbricate thrusts, starting at about 50 ka. The Donga and Dehradun fans were fed by small streams and characterized mainly by sediment gravity‐flow deposits (debris flow and mudflow deposits) in the proximal zone, and mostly mudflow deposits and minor braided stream deposits in the middle zone during the period 50–10 ka. Palaeosols were weakly developed in the proximal zone and moderately to strongly developed in the middle zone. The degree of development of palaeosol was mainly a function of rate of sedimentation and to some extent entrenchment of streams into the fan surface. Since 10 ka, deposition has been typically by braided streams. The Bhogpur fan has been marked by deposition from relatively larger braided streams since 50 ka. The fan sequences in the Dehradun Valley are synorogenic and their deposition started due to activity of the southern footwall imbricate of the MBT, i.e. Bhauwala Thrust on the Donga and Dehradun fans. In these fans, major fan sequences show retrogradation (50–10 ka) related to a decrease in the activity of the MBT and related imbricates and activity of more hinterlandward imbricates with time. After 10 ka a thin prograding sequence was deposited due to uplift of the fans, which resulted from the activity on a thrust in the distal parts of the fans. It suggests an out‐of‐sequence activity of faults in the MBT imbricate system. Cross‐faults divide the Siwalik formations in the footwall of the MBT into three blocks, which were marked by decreasing subsidence or possibly uplift from east to west. Thrusting on the HFF was not piggyback type but synchronous with activity of the MBT and its imbricates. The development of the Mohand fault‐bend anticline above the HFF changed the nature of the basin from foreland to piggyback type, shed minor colluvial deposits prior to 10 ka, and folded the southernmost fan deposits in the western, narrow parts of the valley. A major change in climate from a cold, dry climate with strong seasonal variations prevailing since 50 ka to warm and humid climate at about 10 ka resulted in a change in depositional processes from sediment gravity‐flows to braided streams.     

Testing models of rift basins: structure and stratigraphy of an Eocene–Oligocene supradetachment basin, Muddy Creek half graben, south-west Montana

We examine the basin geometry and sedimentary patterns in the Muddy Creek half graben of south-west Montana by integrating geological mapping, structural and basin analysis, ⁴⁰Ar/³⁹Ar geochronology, biostratigraphy and reflection seismic data. The half graben formed in late Middle Eocene to early Oligocene (?) time at the breakaway of a regional, WSW-dipping detachment system. Although the structure of the half graben is that of a supradetachment basin, facies patterns and basin architecture do not conform to a recent model for extensional basins above detachment faults. The border fault, the Muddy Creek fault system, consists of three en echelon, left-stepping normal faults separated by two relay ramps. The fault steepens southward toward each en echelon step, ranges in dip from 8 to 60° near the surface, but flattens at depths between 0 and 3 km. A broad ENE-plunging displacement-gradient syncline defines the central part of the half graben and is flanked by narrow SE-and NE-plunging anticlines to the north and south. Fine-grained deposits of the syntectonic basin-fill are thickest in the central syncline and interfinger with footwall-derived conglomerate near the adjacent anticlines. These facies patterns suggest that folding was coeval with extension and sedimentation in the half graben. Pre-extensional volcanic rocks and interbedded conglomerate filled a major ESE-trending palaeovalley along the future axis of the Muddy Creek half graben. Synextensional sedimentary deposits include lacustrine and paludal shale, mudstone and sandstone ponded in the centre of the half graben, and a narrow (typically <1.5 km wide) fringe of coarse alluvial-fan and fan-delta conglomerate and sandstone derived from the footwall. Angular unconformities and rock-slide deposits occur only locally within the syntectonic sequence. These facies patterns agree well with the half-graben depositional model of Leeder & Gawthorpe but not with a more recent supradetachment basin model of Friedmann & Burbank despite the demonstrably low dip-angle of the basin-bounding normal fault. These data show that it may not be possible to differentiate between supradetachment basins and half graben with steeper border faults using the architecture of the associated basin-fill deposits.     

Sediment flux from an uplifting fault block

The stratigraphy of rift basins is a direct result of sediment liberation and transport through catchment–fan systems whose dynamics are controlled by both external and internal factors. We investigate the response of catchment–fan systems established across an active normal fault to variations in both tectonic and climatic boundary conditions. Numerical experiments show that the ratio of fan area to catchment area provides a sensitive indicator of tectonic activity. A step decrease in fault slip rate results in a delayed response by the catchment–fan systems; the response time is ∼50 kyr for a variety of parameter values. Decreased slip rate also gives rise to an abrupt but transient pulse in sediment discharge from the fans due to a drop in the hangingwall subsidence rate. In contrast, variations in climatic activity, using precipitation rate as a proxy, produce extremely rapid responses throughout the catchment–fan system. Thus, high-frequency climatic changes will overprint lower frequency tectonic variations in the stratigraphic record of fan deposits. Finally, we map out possible combinations of fault geometry, fault slip rate and precipitation rate that allow fan progradation and high rates of sediment discharge from the system.     

Depositional systems in multiphase rifts: seismic case study from the Lofoten margin,Norway

The evolution of depositional systems in multiphase rifts is influenced by the selective reactivation of faults between subsequent rift phases. The Middle Jurassic to Palaeocene tectonic history of the Lofoten margin, a segment of the North Atlantic rift system, is characterised by three distinct rift phases separated by long (>20 Myr) inter‐rift periods. The initial rift phase comprised a distinct fault initiation and linkage stage, whereas the later rift phases were characterised by selective reactivation of previously linked through‐going faults which resulted in immediate rift climax. Using 2‐D and 3‐D seismic reflection data in conjunction with shallow core data we present a 100 Myr record of shallow to deep marine depositional environments that includes deltaic clinoform packages, slope aprons and turbidite fans. The rapid re‐establishment of major faults during the later rift phases impacts on drainage systems and sediment supply. Firstly, the immediate localisation of strain and accumulation of displacement on few faults results in pronounced footwall uplift and possible fault block rotation along those faults, which makes it more likely for any antecedent fault‐transverse depositional systems to become reversed. Secondly, any antecedent axially‐sourced depositional systems that are inherited from the foregoing rift phase(s) are likely to be sustained after reactivation because such axial systems have already been directed around fault tips. Hence, the immediate localisation of strain through selective reactivation in the later rift phases restricts fault‐transverse sediment supply more than axial sediment supply, which is likely to be a key aspect of the tectono‐sedimentary evolution of multiphase rifts.     

Impact of a pre-existing transverse drainage system on active rift stratigraphy: An example from the Corinth Rift,Greece

Models to explain alluvial system development in rift settings commonly depict fans that are sourced directly from catchments formed in newly uplifted footwalls, which leads to the development of steep-sided talus-cone fans in the actively subsiding basin depocentre. The impact of basin evolution on antecedent drainage networks orientated close to perpendicular to a rift axis, and flowing over the developing hangingwall dip slope, remains relatively poorly understood. The aim of this study is to better understand the responses to rift margin uplift and subsequent intrabasinal fault development in determining sedimentation patterns in alluvial deposits of a major antecedent drainage system. Field-acquired data from a coarse-grained alluvial syn-rift succession in the western Gulf of Corinth, Greece (sedimentological logging and mapping) has allowed analysis of the spatial distribution of facies associations, stratigraphic architectural elements and patterns of palaeoflow. During the earliest rifting phase, newly uplifted footwalls redirected a previously established fluvial system with predominantly southward drainage. Footwall uplift on the southern basin margin at an initially relatively slow rate led to the development of an overfilled basin, within which an alluvial fan prograded to the south-west, south and south-east over a hangingwall dip slope. Deposition of the alluvial system sourced from the north coincided with the establishment of small-scale alluvial fans sourced from the newly uplifted footwall in the south. Deposits of non-cohesive debris flows close to the proposed hangingwall fan apex pass gradationally downstream into predominantly bedload conglomerate deposits indicative of sedimentation via hyperconcentrated flows laden with sand- and silt-grade sediment. Subsequent normal faulting in the hangingwall resulted in the establishment of further barriers to stream drainage, blocking flow routes to the south. This culminated in the termination of sediment supply to the basin depocentre from the north, and the onset of underfilled basin conditions as signified by an associated lacustrine transgression. The evolution of the fluvial system described in this study records transitions between three possible end-member types of interaction between active rifting and antecedent drainage systems: (a) erosion through an uplifted footwall, (b) drainage diversion away from an uplifted footwall and (c) deposition over the hangingwall dip slope. The orientation of antecedent drainage pathways at a high angle to the trend of a developing rift axis, replete with intrabasinal faulting, exerts a primary control on the timing and location of development of overfilled and underfilled basin states in evolving depocentres.     

Axial and transverse deep-water sediment supply to syn-rift fault terraces: Insights from the West Xylokastro Fault Block,Gulf of Corinth,Greece

Deep-water syn-rift systems develop in partially- or transiently-linked depocentres to form complicated depositional architectures, which are characterised by short transport distances, coarse grain sizes and a wide range of sedimentary processes. Exhumed systems that can help to constrain the tectono-stratigraphic evolution of such systems are rare or complicated by inversion tectonics. Here, we document a mid-Pleistocene deep-water syn-rift system fed by Gilbert-type fan deltas in the hangingwall of a rift margin fault bounding the West Xylokastro Horst block, on the southern margin of the Gulf of Corinth, Greece. Structural and stratigraphic mapping combined with digital outcrop models permit observations along this syn-rift depositional system from hinterland source to deep-water sink. The West Xylokastro Fault hangingwall is filled by two distinct sediment systems; an axial system fed by coarse-grained sediment gravity flows derived from fault-tip Gilbert-type fan deltas and a lateral system dominated by mass transport deposits fed from an evolving fault-scarp apron. Abrupt changes in stratigraphic architecture across the axial system are interpreted to record changes in relative base level, sediment supply and tectonics. Locally, depositional topography and intra-basinal structures controlled sediment dispersal patterns, from bed-scale infilling of local rugose topography above mass transport complexes, to basin-scale confinement from the fault scarp apron. These acted to generate a temporally and spatially variable, heterogeneous stratigraphic architecture throughout the basin-fill. The transition of the locus of sedimentation from a rift margin to a fault terrace through the syn-sedimentary growth of a basinward fault produced regressive surfaces updip, which manifest themselves as channels in the deep-water realm and acted to prograde the system. We present a new conceptual model that recognises coeval axial and transverse systems based on the stratigraphic architecture around the West Xylokastro fault block that emphasizes the lateral and vertical heterogeneity of rift basin-fills with multiple entry points.     

Sedimentation and deformation in a Pliocene–Pleistocene transtensional supradetachment basin, Laguna Salada, north-west Mexico

This study examines a thick section of Pliocene–Pleistocene sedimentary rocks exposed in the footwall of an active normal fault (Cañon Rojo fault) near its intersection with the dextral-normal Laguna Salada fault in north-western Mexico. These rocks are situated in the upper plate of an inactive strand of the Cañada David detachment fault, which is cut on the north-east by the Laguna Salada fault. The stratigraphy is divided into three unconformity-bounded sequences: (1) marine mudstone of the Pliocene Imperial Formation; (2) nonmarine Pliocene–Pleistocene redbeds, consisting of sedimentary breccia, conglomerate, conglomeratic sandstone (all un-named) and fine-grained sandstone and mudstone of the Palm Spring Formation; and (3) uncemented Pleistocene boulder gravel. Coarse deposits of the redbeds sequence were deposited in fault-bounded, high- and low-gradient alluvial fans that passed laterally into a low-energy fluvial plain of the ancestral Colorado River (Palm Spring Formation) which occupied the present-day Laguna Salada. Detailed mapping reveals convergence and lap-out of bedding surfaces in the redbeds sequence onto the west limb of a large anticline cored by Imperial Formation. These geometries, combined with fanning dips and thickening of stratigraphy into the flanking syncline, indicate that the anticline grew during deposition of the redbeds. Fold axes of the growth anticline and smaller related folds trend N to NNE, parallel to the strike of associated normal faults and perpendicular to the extension direction. Based on its orientation, large size and relationship to neighbouring structures, the anticline is interpreted to be a fault-bend fold that grew in response to slip of the upper plate over a bend in the Cañada David detachment fault during deposition in a transtensional supradetachment basin. Localized subsidence in the flanking syncline resulted in deposition of >1000 m of alluvial sediments near its intersection with the Laguna Salada fault. Sedimentary detritus is derived exclusively from the north-east (footwall) side of the dextral-normal Laguna Salada fault, indicating that topographic relief was high in the Sierra Cucapa and was subdued or negligible in the footwall of the coeval Cañada David detachment. Following deposition of the redbeds and grey gravel units, the northern part of the detachment fault was abandoned and the modern Cañon Rojo fault was initiated, producing rapid footwall uplift and erosion of previously buried stratigraphy. Slip rate on the Cañon Rojo fault is estimated to be ≈2–4 mm yr^?1 since middle Pleistocene time, similar to the late Pleistocene to Holocene rate determined in previous studies.     

Tectono-sedimentary processes along an active marine/lacustrine half-graben margin: Alkyonides Gulf, E. Gulf of Corinth, Greece

ABSTRACT The Alkyonides half‐graben is separated from the Gerania Range to the south by active faults whose offshore traces are mapped in detail. The East Alkyonides and Psatha Faults have well‐defined, Holocene‐active tip zones and cannot be extrapolated from the onshore Skinos Fault into a single continuous surface trace. During the late Quaternary, catchments draining the step‐faulted range front have supplied sediment to alluvial fans along a subsiding marine ramp margin in the hangingwall of the Skinos Fault, to shelf ledge fans on the uplifting footwall to the East Alkyonides Fault and to the Alepochori submarine fan in the hangingwall of the latter. During late Pleistocene lowstand times (c. 70–12 ka), sediment was deposited in Lake Corinth as fan deltas on the subsiding Skinos shelf ramp which acted as a sediment trap for the adjacent 360 m deep submarine basin plain. At the same time, the uplifting eastern shelf ledge was exposed, eroded and bypassed in favour of deposition on the Alepochori submarine fan. During Holocene times, the Skinos bajada was first the site of stability and soil formation, and then of substantial deposition before modern marine erosion cut a prominent cliffline. The uplifting eastern shelf ledge has developed substantial Holocene fan lobe depositional sequences as sediment‐laden underflows have traversed it via outlet channels. We estimate mean Holocene displacement rates towards the tip of the Psatha Fault in the range 0.7–0.8 mm year^?1. Raised Holocene coastal notches indicate that this may be further partitioned into about 0.2 mm year^?1 of footwall uplift and hence 0.5–0.6 mm year^?1 of hangingwall subsidence. Holocene displacement rates towards the tip of the active East Alkyonides Fault are in the range 0.2–0.3 mm year^?1. Any uplift of the West Alkyonides Fault footwall is not keeping pace with subsidence of the Skinos Fault hangingwall, as revealed by lowstand shelf fan deltas which show internal clinoforms indicative of aggradational deposition in response to relative base‐level rise due to active hangingwall subsidence along the Skinos Fault. Total subsidence here during the last 58 kyr lowstand interval of Lake Corinth was some 20 m, indicating a reduced net displacement rate compared to estimates of late Holocene (< 2000 bp ) activity from onshore palaeoseismology. This discrepancy may be due to the competition between uplift on the West Alkyonides Fault and subsidence on the onshore Skinos Fault, or may reflect unsteady rates of Skinos Fault displacement over tens of thousands of years.     

Architecture and evolution of syn-rift clastic depositional systems towards the tip of a major fault segment, Suez Rift, Egypt

ABSTRACT This paper investigates syn‐rift stratigraphic architecture and facies relationships along a 7 km long strike section towards the tip of a major, basin‐bounding normal fault segment (Thal Fault) in the Suez Rift, Egypt. In this location, the fault is composed of two precursor fault strands, Gushea and Abu Ideimat, linked by a jog or transfer fault. We document a Miocene syn‐rift succession, deposited more than c. 5.5 Myr after rift initiation, that is composed of a range of carbonate‐clastic facies associated with coarse‐grained deltaic, shoreface and offshore depositional systems. Key regionally correlatable stratal surfaces within this succession define time equivalent stratal units that exhibit variability in thickness and architecture, related to the interplay of both regional and local controls, in particular, the evolution of two, small‐scale (<6 km long) precursor fault strands (Gushea and Abu Ideimat). Integration of structural and stratigraphic data indicates that the boundary (relay ramp) between these two fault strands was a relative high during much of the rift event, with hard‐linkage and considerable displacement accumulation not occurring until at least c. 7.5 Myr after rift initiation. This is because: (i) the preserved stratigraphy is thinner in the hanging wall of the strand boundary; (ii) a eustatic sea‐level fall with an amplitude of 100 m generated more than 25 m of incision at the strand boundary, a region that has a final fault displacement of c. 600 m; and (iii) the fault strand boundary persisted as a footwall low and transport pathway for coarse‐grained deltas entering the basin. This study indicates that variability in stratal thickness and stratigraphic architecture towards the tip of the Thal Fault was related to the linkage history of two small‐scale (c. 6 km long) precursor fault segments. We suggest that similar, small‐scale stratal variability may occur repeatedly along the entire length of major basin‐bounding fault segments due to the process of fault growth by the linkage of smaller scale precursor strands.