Late Alpine evolution of the central Menderes Massif, western Turkey

The central Menderes Massif (western Turkey) is characterized by an overall dome-shaped Alpine foliation pattern and a N-NNE-trending stretching lineation. A section through the southern flank of the central submassif along the northern margin of Büyük Menderes graben has been studied. There, asymmetric non-coaxial fabrics indicate that the submassif has experienced two distinct phases of Alpine deformation: a top-to-the N-NNE contractional phase and a top-to-the S-SSW extensional event. The former fabrics are coeval with a regional prograde Barrovian-type metamorphism at greenschist to upper-amphibolite facies conditions. This event, known as the main Menderes metamorphism, is thought to be the result of internal imbrication of the Menderes Massif rocks along south-verging thrust sheets during the collision of the Sakarya continent in the north and the Anatolide-Tauride platform in the south across the Gzmir-Ankara suture during the (?)Palaeocene-Eocene. Top-to-the S-SSW fabrics, represented by a well-developed ductile shear band foliation associated with inclined and/or curved foliation, asymmetric boudins, and cataclasites, were clearly superimposed on earlier contractional fabrics. These fabrics are interpreted to be related to a low-grade (greenschist?) retrogressive metamorphism and a continuum of deformation from ductile to brittle in the footwall rocks of a south-dipping, presently low-angle normal fault that accompanied Early Miocene orogenic collapse and continental extension in western Turkey. A similar tectono-metamorphic history has been documented for the northern flank of the dome along the southern margin of the Gediz graben with top-to-the N-NNE extensional fabrics. The exhumation of the central Menderes Massif can therefore be attributed to a model of symmetric gravity collapse of the previously thickened crust in the submassif area. The central submassif is thus interpreted as a piece of ductile lower-middle crust that was exhumed along two normal-sense shear zones with opposing vergence and may be regarded as a typical symmetrical metamorphic core complex. These relationships are consistent with previous models that the Miocene exhumation of the Menderes Massif and Cycladic Massif in the Aegean Sea was a result of bivergent extension.     

Evolutionary model for Alpine Corsica: mechanism for ophiolite emplacement and exhumation of high-pressure rocks

A tectonic model of Alpine Corsica is proposed based on geological studies. Its evolution starts after the Jurassic with intraoceanic subduction, followed by mid-Cretaceous subduction of the European continental margin under the oceanic segment of the Adriatic plate. After subduction of the continental crust to a depth of ≈ 150 km, slices of crustal material are buoyantly uplifted together with high-pressure oceanic rocks (ophiolites and 'schistes lustrés'). High pressure–low temperature continental gneiss units overthrust the outer segments of the European crust, while producing a normal sense motion along the upper surface of the rising crustal body. During the Eocene, the closure of the remnant Ligurian oceanic basin separating the proto Corsican belt and Adria, resulted in a second orogenic phase with the emplacement of unmetamorphosed ophiolitic nappes which overthrust the previously exhumed and eroded HP belt. This Corsican model suggests an original evolutionary path for orogenic belts when continental collision is preceded by intraoceanic subduction.     

Two subduction events in a polycyclic basement: Alpine and pre-Alpine high-pressure metamorphism in the Suretta nappe, Swiss Eastern Alps

This study is essentially based on coupling macrostructures, microstructures and metamorphic petrology in polymetamorphic mafic rocks from the Swiss Eastern Alps (Suretta nappe, Penninic domain). Petrographic criteria are used in conjunction with structural analysis and microprobe work to define crystallization/deformation relationships and to establish a relative but precise sequence of tectono-metamorphic events. A first eclogite facies overprint and related exhumation occurred before emplacement of late Palaeozoic intrusives. During the Alpine cycle, the Suretta nappe was part of the thinned European continental margin. The Tertiary burial due to subduction and collision is responsible for D1 ductile thrusting and blueschist facies metamorphism. Late deformation phases, related to exhumation, are responsible for the development of extensional structures under greenschist facies conditions. Quantitative metamorphic petrology based on Gibbs free energy minimization (DOMINO by de Capitani) gives a constraint on the P–T  conditions during the polymetamorphic and polycyclic evolution. The first high- P metamorphic event related to pre-Alpine structures occurred at c . 700  °C and at least 2.0  GPa. These conditions are compatible with pre-Alpine high- P re-equilibration already described in several Alpine units. The Alpine high- P metamorphism occurred under blueschist facies conditions at c . 400–450  °C and 1.0  GPa. Similar high- P , low- T  conditions have already been described in the Mesozoic and Permian rock types. The two high- P events are clearly related to two different geothermal regimes and geodynamic environments.     

Alpine metamorphism of pelitic schists in the Nufenen Pass area, Lepontine Alps

Abstract The effects of Tertiary Alpine metamorphism on pelitic Mesozoic cover rocks have been studied along a cross-section in the central Lepontine Alps in the Nufenen Pass area, Switzerland. Greenschist facies to amphibolite facies conditions are indicated by the formation of the index minerals chloritoid, garnet, staurolite and kyanite in pelitic rocks. Regional metamorphism reached maximum conditions during the interkinematic period between a main Alpine penetrative (D2) and a late Alpine (D3) crenulation type deformation phase or synchronous with the late Alpine deformation. Based on AFM phase relationships four different metamorphic zones can be distinguished: (1) chloritoid zone; (2) staurolite + chlorite zone; (3) staurolite + biotite zone; and, (4) kyanite zone. The isograds that separate these zones can be modelled by univariant reactions in the KFMASH system. The conditions of metamorphism calculated from geological ther-mobarometers for the maximum post-D2 por-phyroblast stage are from North to South: 500° C at 5-6 kbar and 600° C at 7-8 kbar. Detailed thermobarometry of garnet por-phyroblasts with complex textures suggests that maximum temperature was reached later than maximum pressure. Early garnet growth occurred along a prograde P-T-path, post-D2 rims grew with increasing temperature but decreasing pressure, and finally post-D3 garnet formed along a retrograde P-T-path. It may be concluded from the calculated pressure and temperature difference over a short distance (3 km) across the mapped area that the isogradic surfaces of the post-D2 metamorphism are steeply oriented. The data also suggest that isobaric and isothermal surfaces are parallel. Much of the observed metamorphic pattern can be explained as the result of a significant post-D2 differential uplift of the hot Pennine area relative to the Helvetic area along a tectonic contact zone. The closely spaced isograds (isotherms) in the North may then be interpreted as a thermal effect owing to the emplacement of the hot Pennine rocks against the Got-thard massif with its cover. Whereas, in the Pennine metasediments, post-D2 porphyroblast formation can be related to the decompression path which was steep enough for dehydration reactions to proceed. It is also remarkable that late kyanite porphyroblasts probably formed with decreasing pressure. The interpretation given here for the Nufenen Pass area may also apply to the Luk-manier Pass area where similar metamorphic patterns have been reported by Fox (1975). The formation of the ‘Northern Steep Belt’;, as denned by Milnes (1974b), and the associated late Alpine fold zones may, therefore, have significantly modified the metamorphic pattern of the Helvetic-Penninic contact zone.     

HP/LT metamorphism in the Volparone Breccia (Northern Corsica, France): evidence for involvement of the Europe/Corsica continental margin in the Alpine subdution zone

The Alpine belt in Corsica (France) is characterized by the occurrence of stacked tectonic slices derived from the Corsica/Europe continental margin, which outcrop between two weakly or non‐metamorphic tectonic domains: the ‘autochthonous’ domain of the Hercynian basement to the west and the Balagne Nappe (ophiolitic unit belonging to the ‘Nappes supérieures’) to the east. These slices, including basement rocks (Permian granitoids and their Palaeozoic host rocks), Late Carboniferous–Permian volcano‐sedimentary deposits, coarse‐grained polymict breccias (Volparone Breccia) and Middle Eocene siliciclastic turbidite deposits, were affected by a polyphase deformation history of Alpine age, associated with a well‐developed metamorphic recrystallization. This study provides new quantitative data about the peak of metamorphism and the retrograde P–T path in the Alpine Corsica: the tectonic slices of Volparone Breccia from the Balagne region (previously regarded as unmetamorphosed) were affected by peak metamorphism characterized by the phengite + chlorite + quartz ± albite assemblage. Using the chlorite‐phengite local equilibria method, peak metamorphic P–T conditions coherent with the low‐grade blueschist facies are estimated as 0.60 ± 0.15 GPa and 325 ± 20 °C. Moreover, the retrograde P–T path, characterized by a decrease of pressure and temperature, is evidence of the first stage of the exhumation path from the peak metamorphic conditions to greenschist facies conditions (0.35 ± 0.06 GPa and 315 ± 20 °C). The occurrence of metamorphic peak at high‐pressure/low‐temperature (HP/LT) conditions is evidence of the fact that these tectonic slices, derived from the Corsica/Europe continental margin, were deformed and metamorphosed in the Alpine subduction zone during their underplating at ～20 km of depth into the accretionary wedge and were subsequently juxtaposed against the metamorphic and non‐metamorphic oceanic units during a complex exhumation history.     

Tertiary tectono-metamorphic evolution of the European margin during Alpine collison: example of the Leventina Nappe (Central Alps,Switzerland)

The Leventina Nappe represents one of the lowermost exposed units in the Alpine nappe stack and corresponds to a slice of the European margin that was entrained into the Alpine continental accretionary prism during the Tertiary tectonic event. This study yields details regarding the tectonic and metamorphic history of the Leventina Nappe, through detailed analysis of structures and shear zone patterns, and the examination of the Si-content of white mica along a north-south profile. The Leventina Nappe underwent three phases of ductile deformation. Foliation S1 is mostly sub-parallel to the regionally dominant structural fabric (the S2 foliation). S2 foliation is penetratively developed in the structurally higher portions of the Leventina Nappe toward the Simano Nappe, while it is only weakly developed in the core of the Leventina Nappe. A 50 to 200 m wide mylonite zone, with a D2 top-to-NW sense of shear marks the boundary to the Simano Nappe. Throughout the Leventina Nappe only small-scale D2 shear bands (mm to cm wide) are observed, showing a top-to-NW sense of shear. Deformation phase D3 locally generated a vertical axial plane foliation (S3) associated with the large-scale D3 Leventina antiform.Microtextural evidence and phengite geobarometry were used to constrain the temperature and pressure conditions of equilibration of the Leventina Gneisses. Highest Si (pfu) values are preserved in the core of phengitic micas and reflect pressure and temperature conditions of around 8 kbar at 550 °C and 10 kbar at 650 °C in the northern and southern parts of the Leventina Nappe, respectively. Lower Si (pfu) values from the rims of white micas correspond to a metamorphic pressure of ca. 5 kbar during the exhumation of the unit. These metamorphic conditions are related to the underthrusting of the thinned European margin into the continental accretionary prism during late Eocene time. These new data allow us to propose a kinematic model for the Leventina Nappe during the Tertiary Alpine tectonics.     

Evolution of Alpine eclogites in the Eastern Alps: Implications for Alpine geodynamics

In the Eastern Alps Alpine eclogites are generally associated with rocks of continental lithosphere, while eclogites that are associated with oceanic assemblages are restricted to minor exposures. Such eclogites are exposed both in the Penninic unit of the Tauern Window and in the Austroalpine nappe complex. (1) In the central southern part of the Tauern Window (Eclogite Zone) eclogites and associated high pressure metasediments of a distal continental margin are intercalated between Penninic basement units. A mylonitic eclogitic foliation and stretching lineation are contemporaneous to the high pressure metamorphism and are related to the subduction of distal Penninic continental margin sequences. Continuous subduction of cool lithosphere resulted in blueschist facies overprint of the whole Penninic nappe pile. (2) Within the Middle-AustroAlpine Koralm/Saualm region most eclogites are eclogitic mylonites documenting plastic deformation of omphacite and garnet. The meso- and macroscale structures indicate an overall extensional regime possibly related to a large-scale SE-directed ductile low-angle normal shear zone. The eclogites are associated with migmatite-like structures and are intruded by pegmatites. This indicates decreasing pressure, but isothermal or even increasing temperature conditions during exhumation.These relationships argue for the subduction of Penninic continental lithosphere in the foot-wall of the Austroalpine unit at the time of exhumation of the Koralm/Saualm eclogites. Formation of the Austroalpine eclogites is explained by subduction of continental lithosphere, and subsequent, rapid exhumation in an upper plate tectonic position within an extensional regime.     

Low-temperature constraints on the Alpine thermal evolution of the Western Carpathian basement rock complexes

The Cretaceous to Palaeogene Alpine exhumation of previously buried Variscan basements is recorded in the southern portion of the Western Carpathians in the Gemeric and Veporic units. The Meso-Cenozoic collisional processes resulted in basement exhumation of the Tatric Unit from Palaeogene to Neogene times. According to zircon and apatite fission track data, the Gemeric Unit, an uppermost thick-skinned thrust sheet, cooled from depth levels of ∼10 up to 2.5 km (temperature interval of ∼250–60 °C) about 88–64 Ma ago, after the collapse of overlying Meliata-Turňa-Silica Mesozoic accretionary prism. The middle and lower thick-skinned thrust sheets, Veporic and Tatric units, cooled from the depths of ∼10 up to 2.5 km ∼110–40 Ma ago. The process was controlled by unroofing of footwall from beneath the Gemeric Unit. About 50–20 Ma ago, the internal zone of Tatric Unit gradually exhumed to depth of <2 km and some parts of the unit appeared at the surface level. However, the external zone of Tatric Unit was buried beneath the Eocene to Lower Miocene sedimentary successions and exhumed to the subsurface level at ∼21–8 Ma ago, as a result of oblique collision of the Western Carpathians with the European Platform.     

Mesozoic evolution of the Tisza Mega-unit

The south-eastern part of the basement of the Pannonian Basin is made up of Variscan crystalline complexes and early Mesozoic formations showing striking affinity with the corresponding formations in the southern margin of the European Plate. This large composite structural unit, which is actually an exotic terrane of European Plate origin, has been named the Tisza Mega-unit. Based upon relevant data of the pre-Tertiary basement of southern Hungary the reconstruction of the position of the Tisza Terrane in the early Alpine evolutionary stages, the process of its separation and break-off from the European Plate, and results of its Eo-Alpine deformations are summarised in the present paper. In the Variscan and early Alpine evolutionary stages the area of the later Tisza Mega-unit was located at the margin of the European Plate. During Variscan orogeny terrane accretion led to intensive deformation and metamorphism in this belt. This was followed by transpressional tectonics and the development of molasse basins in the late and post-Variscan stages, and passive margin evolution after the Neotethys opening in the Middle Triassic. The separation of the Tisza Mega-unit began with incipient continental rifting along the axis of the later Ligurian–Penninic–Vahic oceanic branch in the Late Triassic. The end of terrigenous material deposition in the most external zones, and a coeval change in fossil assemblage, point to the separation of the Tisza Block from the European Plate in the Early Bathonian. Significant rotation of the Tisza Mega-unit and coeval paroxysm of alkaline rift-type basalt volcanism took place in the Early Cretaceous. In the mid-Cretaceous, due to the northward motion of the Adria Block and the related closure of the westernmost Neotethys basin, the extensional regime changed to a compressional one, leading to onset of the nappe stacking and low-grade regional metamorphism within the Tisza microplate. In the foreland of the nappe systems flexural basins came into existence that are characterised by flysch-type sedimentation. In the Early Tertiary the north-eastward motion of the Alcapa and Tisza + Dacia Blocks led to the formation of the present-day heterogeneous basement of the Pannonian Basin.     

High‐pressure mineral assemblage in granitic rocks from continental units,Alpine Corsica,France

The Popolasca–Francardo area of northern Corsica contains an assemblage of continental tectonic units affected by an Alpine deformation. In one of these units, Unit II, previously regarded as weakly metamorphosed, a metamorphic mineral assemblage characterized by sodic amphibole, phengite, quartz, albite and epidote has been found in an aplite dyke that cuts the dominant granitoids. Peak‐metamorphic temperature and pressure conditions of 300–370°C and 0.50–0.80 GPa, respectively, have been determined. This finding indicates that a continuous belt of continental slices, characterized by high‐pressure, low‐temperature metamorphism of Tertiary age, extends from the Tenda Massif in the north to the Corte area in the south, thus placing additional constraints on the tectonic evolution of Alpine Corsica. Copyright © 2005 John Wiley & Sons, Ltd.     

Did the “Autochthonous” European foreland of Corsica Island (France) experience Alpine subduction?

Despite the important role played by the Sardinia‐Corsica block in the reconstruction of the Western Mediterranean geodynamics, the extent of involvement of the “Autochthonous” European margin exposed in Corsica (France) (i.e., Hercynian Corsica) in the Alpine orogeny remains uncertain. Stratigraphic and sedimentological studies in the post‐Variscan deposits on the Hercynian Corsica are scarce and even scarcer are the structural and metamorphic constraints. To face these uncertainties, we present new stratigraphic, structural and metamorphic data from the area of Razzo Bianco, Central Corsica, where a complete sequence belonging to the European continental margin is exposed. Field and structural investigations demonstrate that the sequence represents the easternmost edge of the downgoing European plate. Metamorphic studies on the Eocene deposits indicate that the margin was buried at depth up to blueschist facies conditions and, subsequently, it was progressively exhumed mainly through the activation of oblique top‐to‐the NW shear zones.     

Alpine reworking of Ordovician protoliths in the Western Carpathians: Geochronological and geochemical data on the Muráñ Gneiss Complex, Slovakia

Magmatic protoliths of Ordovician age have been identified in the metamorphic rocks of the Muráñ Gneiss Complex, Veporic Unit (Central Western Carpathians). Vapor digestion single zircon U–Pb dating yields an intrusion age of 464 ± 35 Ma (upper intercept) for the granite protolith. A lower intercept age of 88 ± 40 Ma records amphibolite-facies metamorphic overprint in the Cretaceous, during the Alpine orogeny. Geochemical and isotopic data suggest crustal origin of the orthogneiss. Nd_initial are between − 2.6 and − 5.0 and T_DM^Nd between 1.3 and 1.5 Ga (two-step approach). ⁸⁷Sr / ⁸⁶Sr_initial ratios vary between 0.7247 and 0.7120, and a steep REE pattern further constrains the crustal affinity of these rocks. Associated amphibolite bodies have Nd_initial values of 6.5, ⁸⁷Sr / ⁸⁶Sr_initial ratio of 0.7017, and a flat REE pattern. They are interpreted as MORB derived metabasites. Whole-rock Pb isotope analyses define a linear array in a ²⁰⁶Pb / ²⁰⁴Pb vs. ²⁰⁷Pb / ²⁰⁴Pb diagram with an age of ca. 134 Ma, consistent with intense Alpine metamorphism and deformation.

These basement rocks of the Central Western Carpathians are interpreted as Ordovician magmatic rocks intruded at an active margin of Gondwana. They represent the eastern prolongation of Cambro–Ordovician units of the European Variscides, which were part of the peri-Gondwana superterrane and accreted to Laurussia during the Variscan orogeny. Variscan metamorphic overprint is not recorded by the isotopic data of the Muráñ Gneiss Complex. Alpine metamorphism is the most dominant overprint.     

Record of plate boundary metamorphism during Gondwana breakup from Lu–Hf garnet geochronology of the Alpine Schist,New Zealand

The Zealandia portion of the Pacific–Gondwana margin underwent widespread extension, fragmentation, separation and subsidence during the final stages in the breakup of Gondwana. Although these processes shaped the geology of New Zealand, their timing and the timing of subduction cessation in the region remain unclear. To investigate the timing of these processes, we used Lu–Hf garnet geochronology to date six samples of the Alpine Schist, which represents the metamorphic section of the former Zealandia margin. The garnet dates range from 97.3 ± 0.3 to 75.4 ± 1.3 Ma. Compositional zoning in garnet indicates that the spread in ages results from diachronous metamorphism in the upper plate at the Pacific–Gondwana margin, occurring concurrently with rifting of Zealandia from East Gondwana via opening of the Tasman Sea. Clear spatial trends in the timing of garnet growth throughout the Alpine Schist are absent, indicating that either regional age trends were offset by post‐metamorphic deformation, or that metamorphism did not result from a single regional heat source, and was instead driven by short‐duration, spatially dispersed processes such as episodic fluid‐fluxing or mechanical heating. Diachronous metamorphism of the Alpine Schist can be attributed to heat conduction from the rising upper mantle during widespread extension, progressive burial and heating of accretionary wedge sediments during ongoing horizontal shortening, or fluid‐fluxing sourced from a subducting and dehydrating Hikurangi Plateau. These results indicate that during separation of Zealandia from East Gondwana in the late Cretaceous, the crust at the Pacific–Gondwana margin remained hot, potentially facilitating the extensive thinning of the Zealandia lithosphere during this time.     

Data on the tectonic and metamorphic evolution of the central Sierra De Los Filabres,Betic Cordilleras,se Spain

Within the area investigated three tectonic units are distinguished which can be referred to the Nevado-Filabride, Ballabona-Cucharón, and Alpujarride complex, respectively. During the Alpine orogeny the rocks considered were subjected to various phases of folding and overthrusting. This tectonic evolution was accompanied by a metamorphism of a plurifacial character. The relation between tectonic events and metamorphic recrystallization is schematically outlined for each of the tectonic units distinguished. The units show marked differences in their degree of metamorphic recrystallization, caused by differences between the metamorphic conditions in each of the units during the earlier stages of metamorphism. The younger stages of metamorphism postdate important overthrust movements and have affected the whole pile of tectonic units. The Palaeozoic (and older?) rock sequences do not yield conclusive evidence of prealpine metamorphism, and definite proof of pre-alpine deformation is wanting. Consequently the difference in metamorphic grade between the Palaeozoic (and older?) and the Permo-Triassic rocks of the Alpujarride complex has to be explained by differences in metamorphism of Alpine age.     

Tectonically driven fluid flow and associated low-grade metamorphism during the Alpine compression in the eastern Iberian Chain (Spain)

Fluid inclusions and clay mineralogy of the Permo-Triassic rocks from the Espina and Espadà Ranges (SE Iberian Chain, Spain) have been investigated to establish their relationship with hydrothermal fluid circulation during the Alpine Orogeny. Primary fluid inclusions in quartz-filled tension gashes in Permo-Triassic sandstones reveal maximum temperatures around 230 °C and very constant salinities of 8.5% wt. eq. NaCl. Secondary fluid inclusions found in quartz from the Santonian Ba–Cu–Hg deposits show similar compositional and thermodynamic characteristics, denoting an Alpine recrystallization. Clay mineral composition of Permo-Triassic mudrocks is characterized by pyrophyillite, indicating low-grade metamorphic conditions. Field observations and experimental data suggest that the crystallization of quartz in tension gashes, the formation of secondary fluid inclusions and the development of the metamorphism are contemporaneous and related to fluid circulation during the Alpine compression. Fluid flow took place along the Hercynian fault system that was reactivated during the Mesozoic rift stage and inverted during the Alpine deformation.     

Subduction-driven shortening and differential exhumation in a Cadomian accretionary wedge: The Teplá–Barrandian unit,Bohemian Massif

The Teplá–Barrandian unit (TBU) of Central Europe's Bohemian Massif exposes perhaps the best preserved fragment of an accretionary wedge in the Avalonian–Cadomian belt, which developed along the northern active margin of Gondwana during Late Neoproterozoic. In the central TBU, three NE–SW-trending lithotectonic units (Domains 1–3) separated by antithetic brittle faults differ in lithology, style and intensity of deformation, magnetic fabric (AMS), and degree of Cadomian regional metamorphism. The flysch-like Domain 1 to the NW is the most outboard (trenchward) unit which has never been significantly buried and experienced only weak deformation and folding. The central, mélange-like Domain 2 is characterized by heterogenous intense deformation developed under lower greenschist facies conditions, and was thrust NW over Domain 1 along a SE-dipping fault. To the SE, the most inboard (arcward) Domain 3 is lithologically monotonous (dominated by graywackes and slates), was buried to depths corresponding up to the lower greenschist facies conditions, where it was overprinted by a pervasive SE-dipping cleavage and then was exhumed along a major NW-dipping normal fault.We interpret these domains to represent allochtonous tectonic slices that were differentially buried and then exhumed from various depths within the accretionary wedge during Cadomian subduction. The NW-directed thrusting of Domain 2 over Domain 1 may have been caused by accretion at the wedge front, whereas the SE-dipping cleavage and SE-side-up exhumation of Domain 3 may record inclined pervasive shortening during tectonic underplating and subsequent horizontal extension of the rear of the wedge. The boundary faults were later reactivated during Cambro–Ordovician extension and Variscan compression.Compared to related terranes of the Cadomian belt, the TBU lacks exposed continental basement, evidence for regional strike-slip shearing, and extensive backarc magmatism and LP–HT metamorphism, which could be interpreted to reflect flat-slab Cadomian subduction. This, in turn, suggests that Cadomian accretionary wedges developed in a manner identical to those of modern settings, elevating the TBU to a key position for understanding the style, kinematics, and timing of accretionary processes along the Avalonian–Cadomian belt.     

Rift-related inheritance in orogens: a case study from the Austroalpine nappes in Central Alps (SE-Switzerland and N-Italy)

The Austroalpine nappe systems in SE-Switzerland and N-Italy preserve remnants of the Adriatic rifted margin. Based on new maps and cross-sections, we suggest that the complex structure of the Campo, Grosina/Languard, and Bernina nappes is inherited largely from Jurassic rifting. We propose a classification of the Austroalpine domain into Upper, Middle and Lower Austroalpine nappes that is new because it is based primarily on the rift-related Jurassic structure and paleogeography of these nappes. Based on the Alpine structures and pre-Alpine, rift-related geometry of the Lower (Bernina) and Middle (Campo, Grosina/Languard) Austroalpine nappes, we restore these nappes to their original positions along the former margin, as a means of understanding the formation and emplacement of the nappes during initial reactivation of the Alpine Tethyan margin. The Campo and Grosina/Languard nappes can be interpreted as remnants of a former necking zone that comprised pre-rift upper and middle crust. These nappes were juxtaposed with the Mesozoic cover of the Bernina nappe during Jurassic rifting. We find evidence for low-angle detachment faults and extensional allochthons in the Bernina nappe similar to those previously described in the Err nappe and explain their role during subsequent reactivation. Our observations reveal a strong control of rift-related structures during the subsequent Alpine reactivation on all scales of the former distal margin. Two zones of intense deformation, referred to as the Albula-Zebru and Lunghin-Mortirolo movement zones, have been reactivated during Alpine deformation and cannot be described as simple monophase faults or shear zones. We propose a tectonic model for the Austroalpine nappe systems that link inherited, rift-related structures with present-day Alpine structures. In conclusion, we believe that apart from the direct regional implications, the results of this paper are of general interest in understanding the control of rift structures during reactivation of distal-rifted margins.     

Timing of metamorphism in the Tauern Window, Eastern Alps: Rb-Sr ages and fabric formation

The Peripheral Schieferhülle of the Tauern Window of the Eastern Alps represents post-Hercynian Penninic cover sequences and preserves a record of metamorphism in the Alpine orogeny, without the inherited remnants of Hercynian events that are retained in basement rocks. The temperature-time-deformation history of rocks at the lower levels of these cover sequences have been investigated by geochronological and petrographic study of units whose P-T evolution and structural setting are already well understood. The Eclogite Zone of the central Tauern formed from protoliths with Penninic cover affinities, and suffered early Alpine eclogite facies metamorphism before tectonic interposition between basement and cover. It then shared a common metamorphic history with these units, experiencing blueschist facies and subsequent greenschist facies conditions in the Alpine orogeny. The greenschist facies phase, associated with penetrative deformation in the cover and the influx of aqueous fluids, reset Sr isotopes in metasediments throughout the eclogite zone and cover schists, recording deformation and peak metamorphism at 28-30 Ma. The Peripheral Schieferhülle of the south-east Tauern Window yields Rb-Sr white mica ages which can be tied to the structural evolution of the metamorphic pile. Early prograde fabrics pre-date 31 Ma, and were reworked by the formation of the large north-east vergent Sonnblick fold structure at 28 Ma. Peak metamorphism post-dated this deformation, but by contrast to the equivalent levels in the central Tauern, peak metamorphic conditions did not lead to widespread homogenization of the Sr isotopes. Localized deformation continued into the cooling path until at least 23 Ma, partially or wholly resetting Sr white mica ages in some samples. These isotopic ages may be integrated with structural data in regional tectonic models, and may constrain changes in the style of crustal deformation and plate interaction. However, such interpretations must accommodate the demonstrable variation in thermal histories over small distances.     

Magnetic fabric evolution in ductile shear zones: examples in metagranites of the Aar Massif (Swiss Central Alps)

The Aar Massif forms part of the polycyclic basement of the External Crystalline Massifs in central Switzerland. Strong heterogeneous Alpine deformation produced a network of broad, anastomosing shear zones, with deformation strongly localized in mylonitic domains. This study investigates the combined effects of high‐strain deformation and synkinematic metamorphism on magnetic fabric evolution in Tertiary shear zones of the Aar granite and Grimsel granodiorite. In transects across several mesoscale shear zones with large strain gradients, magnetic fabric orientations are in excellent agreement with principal strain orientations determined from outcrop fabrics and strain markers. However, the magnitude and shape of the magnetic anisotropy do not change systematically with increasing finite strain, likely as a result of recrystallization and metamorphism. The overall pattern of steeply dipping fabrics is consistent with the main shortening stage of regional Alpine kinematics, while some mylonite structures reflect a local component of dextral shearing.     

Polyphase greenschist-facies reactivation of the Dent Blanche Basal Thrust (Western Alps) during progressive Alpine orogeny

This study assesses the significance, geometry, and kinematics of greenschist-facies deformation along the Dent Blanche Basal Thrust (DBBT), a major tectonic contact in the Internal Western Alps of Switzerland and Italy. The DBBT separates continental units of the Dent Blanche nappe, the structurally highest unit in the Western Alps, from underlying Piemont-Ligurian ophiolites. Mylonites and deformation structures along the contact provide a record of its retrograde greenschist-facies evolution after earlier high-pressure metamorphism. A first phase of foreland-directed, reverse-sense, top-(N)W shearing (D1) occurred between ca. 43 and 39 Ma, related to exhumation of the Dent Blanche nappe from high-pressure conditions. It led to the formation of mylonitic fabrics under high- to medium-grade greenschist-facies conditions along the entire DBBT. A phase of ductile normal-sense top-SE shearing (D2) at ca. 38–37 Ma was mainly localized within underlying ophiolitic units and only partly affected the DBBT. Another phase of ductile deformation (D3) under medium- to low-grade greenschist-facies conditions at ca. 36–35 Ma occurred in response to underthrusting of European continental margin units and resulted in the updoming of the nappe stack. Especially the southeastern DBBT was characterized by bulk top-NW shearing, partly conjugate top-NW/top-SE shearing, and resulting orogen-perpendicular crustal extension. Subsequently, the DBBT was affected by a phase of orogen-perpendicular shortening (D4) and formation of folds and crenulations at ca. 34–33 Ma due to increasing compressional tectonics. Finally, a phase of semi-ductile to brittle normal-sense top-NW and conjugate shearing (D5) from ca. 32 Ma onwards particularly affected the southeastern segment and indicates exhumation of the DBBT through the ductile–brittle transition. This was followed by brittle NW–SE extensional deformation. This study suggests that the DBBT experienced a polyphase deformation and reactivation history under decreasing greenschist-facies metamorphic conditions during which different segments of this major shear zone were variably affected.