Geology and inclusion studies on the genesis of the Baolun gold deposit in Hainan Province,South China

The late Triassic Baolun gold deposit hosted by Silurian phyllites is a large‐scale high‐grade gold deposit in Hainan Island, South China. The ores can be classified into quartz‐vein dominated type and less altered rock type. Three mineralization stages were recognized by mineral assemblages. The early stage, as the most important mineralization stage, is characterized by a quartz–native gold assemblage. The muscovite?quartz?pyrite?native gold assemblage is related to the intermedium mineralization stage. In late mineralization stage, native gold and Bi‐bearing minerals are paragenetic minerals. Microthermometry analyses show that the early mineralization stage is characterized by two types of fluid inclusions, including CO₂‐rich inclusions (C‐type) and aqueous inclusions (W‐type). C‐type inclusions homogenize at 276–335°C with an averaged value of 306°C and have salinities of 1.0–10.0 wt% NaCl equivalent (mean value of 4.9 wt% NaCl equivalent). W‐type inclusions homogenize at 252–301°C (mean value of 278°C) with salinity of 4.0–9.7 wt% NaCl equivalent (mean value of 7.4 wt% NaCl equivalent). In intermedium mineralization stage, C‐type and W‐type inclusions homogenize at 228–320°C (mean value of 283°C) and 178–296°C (mean value of 241°C), with salinities of 2.4–9.9 wt% NaCl equivalent (mean value of 6.5 wt% NaCl equivalent) and 3.7–11.7 wt% NaCl equivalent (mean value of 7.7 wt% NaCl equivalent), respectively. No suitable mineral, such as quartz or calcite, was found for fluid inclusion study from late mineralization stage. In contrast, only aqueous inclusions were found from post‐ore barren veins, which yielded lower homogenization temperatures ranging from 168–241°C (mean value of 195°C) and similar salinities (2.6–12.6 wt% NaCl equivalent with averaged value of 7.2 wt% NaCl equivalent). The different homogenization temperatures and similar salinities of C‐type and W‐type from each mineralization stage indicate that fluid immiscibility and boiling occurred. The Baolun gold deposit was precipitated from a CO₂‐bearing mesothermal fluid, and formed at a syn‐collision environment following the closure of the Paleo‐Tethys.     

Geology,Fluid Inclusion,and Sulfur Isotope Studies of the Chehugou Porphyry Molybdenum–Copper Deposit,Xilamulun Metallogenic Belt,NE China

The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ³⁴S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ³⁴S values of sulfide are similar to δ³⁴S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin.     

Characteristics of Mineralizing Fluids of the Darreh‐Zerreshk and Ali‐Abad Porphyry Copper Deposits,Central Iran,Determined by Fluid Inclusion Microthermometry

The Darreh‐Zereshk (DZ) and Ali‐Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore‐hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz‐sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono‐phase vapor type (Type I), liquid‐rich two phase (liquid + vapor) type (Type IIA), vapor‐rich two phase (vapor + liquid) type (Type IIB), and multi‐phase (liquid + vapor + halite + sylvite + hematite + chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150° to >600°C from low to very high salinity (1.1–73.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th_(L‐V) > Tm_(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th_(L‐V) < Tm_(NaCl)). The high Th_(L‐V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of ～500°C and salinity ～50 wt% NaCl equiv. Cryogenic SEM‐EDS analyses of frozen and decrepitated ore‐bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl₂.     

Geological and Fluid Inclusion Constraints on Gold Deposition Processes of the Dayingezhuang Gold Deposit,Jiaodong Peninsula,China

The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.     

A fluid inclusion study of the porphyry-greisen,tungsten-molybdenum deposit at Mount Pleasant,New Brunswick,Canada

Homogenization temperatures and salinity data are presented for fluid inclusions from hydrothermal gangue minerals (quartz and fluorite) associated with porphyry wolframite-molybdenite-arsenopyrite-sphaleritebismuth-chalcopyrite-cassiterite mineralization within the Fire Tower ore zone, Mt Pleasant, New Brunswick. The data indicate that ore mineral precipitation occurred within a temperature range of 260° to 490°C from moderate to high salinity (10–42 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized by high (>30 wt% NaCl equivalent) salinity fluids are recognized; one which occurred at relatively high temperature (350°–490°C); and one which took place at lower temperature (180°–250°C). The high salinity, high temperature stage is interpreted to be the result of resurgent boiling. Dilution of these early fluids by convecting meteoric water resulted in low to moderate salinity fluids, which dominate the inclusion population. The low temperature, high salinity fluid inclusions are interpreted to represent late residual fluids derived from boiling which occurred as a result of a change in the pressure regime from dominantly lithostatic to hydrostatic conditions.     

黑龙江省铜山斑岩铜矿床流体包裹体研究

铜山大型铜矿床位于小兴安岭西北部,是中亚-兴蒙造山带北东段最著名的斑岩型铜矿床之一,矿体产于加里东期花岗闪长岩和中奥陶世多宝山组安山岩、凝灰岩中,铜矿化与硅化-绢云母化关系密切.流体包裹体研究表明,铜山铜矿床主要发育气液两相包裹体、含CO_2包裹体和含子矿物多相包裹体.成矿流体在形成过程中经历了早、中、晚3个阶段的演化.成矿早阶段发育气液两相水溶液包裹体和少量含子矿物多相包裹体,均一温度介于420℃～＞5500C之间,流体盐度介于13.72 wt%～59.76 wt%NaCl eqv之间;中阶段为铜山矿床的主成矿阶段,发育气液两相水溶液包裹体和含CO_2包裹体,均一温度为241℃～417℃,流体盐度介于2.96 wt%～14.04 wt%NaCl eqv之间,主成矿期成矿流体总体上属H_2O-CO_2-NaCl体系;晚阶段仅发育气液两相水溶液包裹体,均一温度为122℃～218℃,盐度介于3.71 wt%～15.96 wt%NaCl eqv之间,表明晚阶段有大气降水的混入.成矿早、中阶段的流体均为不混溶流体,流体沸腾作用是金属硫化物大量沉淀的主要机制.铜山矿床形成于陆缘弧环境.     

Fluid inclusion study of the Wunugetu Cu–Mo deposit,Inner Mongolia,China

Hydrothermal alteration and mineralization at the Wunugetu porphyry Cu–Mo deposit, China, include four stages, i.e., the early stage characterized by quartz, K-feldspar and minor mineralization, followed by a molybdenum mineralization stage associated with potassic alteration, copper mineralization associated with sericitization, and the last Pb–Zn mineralization stage associated with carbonation. Hydrothermal quartz contains three types of fluid inclusions, namely aqueous (W-type), daughter mineral-bearing (S-type) and CO₂-rich (C-type) inclusion, with the latter two types absent in the late stage. Fluid inclusions in the early stage display homogenization temperatures above 510°C, with salinities up to 75.8 wt.% NaCl equivalent. The presence of S-type inclusions containing anhydrite and hematite daughter minerals and C-type inclusions indicates an oxidizing, CO₂-bearing environment. Fluid inclusions in the Mo- and Cu-mineralization stages yield homogenization temperatures of 342–508°C and 241–336°C, and salinities of 8.6–49.4 and 6.3–35.7 wt.% NaCl equivalent, respectively. The presence of chalcopyrite instead of hematite and anhydrite daughter minerals in S-type inclusions indicates a decreasing of oxygen fugacity. In the late stage, fluid inclusions yield homogenization temperatures of 115–234°C and salinities lower than 12.4 wt.% NaCl equivalent. It is concluded that the early stage fluids were CO₂ bearing, magmatic in origin, and characterized by high temperature, high salinity, and high oxygen fugacity. Phase separation occurred during the Mo- and Cu-mineralization stages, resulting in CO₂ release, oxygen fugacity decrease and rapid precipitation of sulfides. The late-stage fluids were meteoric in origin and characterized by low temperature, low salinity, and CO₂ poor.     

Whole rock geochemistry,molybdenite Re-Os geochronology,stable isotope and fluid inclusion investigations of the Siah-Kamar deposit,western Alborz-Azarbayjan: New constrains on the porphyry Mo deposit in Iran

The Siah-Kamar porphyry Mo deposit, located in the western Alborz-Azarbayjan magmatic belt, is the first and largest Mo deposit in the Iran. This deposit is mainly hosted by an I-type, shoshonitic quartz monzonite to monzonite intrusion and also extends in the surrounding lower to middle Eocene volcanic rocks. The geochemical features of the Siah-Kamar intrusion show enrichment in large-ion lithophile elements (LILE) and light rare earth elements (LREE), and significant negative anomalies of Nb, Ta and Ti analogues to the magmas derived from metasomatized sub-continental mantle. Porphyry molybdenum mineralization is associated with potassic, sericitic, argillic, and propylitic alteration zones. Mineralization occurs in disseminated form, in veins/veinlets and in hydrothermal breccias. The main ore minerals comprise molybdenite, chalcopyrite and bornite. The Microthermometric analyses at Siah-Kamar deposit showed that the halite-bearing inclusions contain high salinity (30.9–60.7 wt% NaCl eq.) with homogenization temperature ranging from 226 °C to 397 °C. The homogenization temperature of two phase liquid-rich inclusions range between 224 °C and 375 °C. The salinity of this type inclusions range from 0.6 to 7.5 wt% NaCl equivalent. The two-phase vapor-rich fluid inclusions homogenized at 270 °C to 397 °C. The salinity of this type fluid inclusions lie within the range of 0.6 to 4.24 wt% NaCl equivalent. Coexisting two phase V-rich and L-rich fluid inclusions in quartz associated with molybdenite provide evidence for boiling at 270 °C to 400 °C. The δ¹⁸O_water values of quartz in the molybdenite-bearing veins vary from +2.16 to +4.05‰, suggesting a magmatic origin for the ore-forming fluids. Re-Os isotopic dating of molybdenite indicated a mineralization age of 41.9 ± 3.6 Ma. The Re concentration in molybdenite suggests incorporation of mantle derived melt with crustal materials. The late Eocene magmatism along the western Alborz-Azarbayjan magmatic zone resulted from the Neo-Tethys subduction beneath the Iranian plateau. The Siah-Kamar monzonitic intrusion hosting the Mo deposit, could be considered as an example among the late Eocene intrusions within the western Alborz-Azarbayjan magmatic zone for any further exploration in this zone.     

Paleofluid analysis from fracture-fill cements in the Asmari limestones of the Kuh-I-Mond field, SW Zagros, Iran

Kuh-I-Mond field in the Zagros foreland basin is a conventional heavy oil resource and is composed of fractured carbonates whose fractures were filled by calcite, dolomite, and anhydrite cements. Oil inclusions occurred within the fracture-fill cements indicate that fractures were open and played an active role during oil migration and charge. The highest measured values for secondary porosities belong to fractures in Asmari Formation, which is characterized by significant amounts of vug- and fracture-filling cements. Fractures facilitated fluid circulation and subsequently dissolution of allochems and high Mg carbonates. In contrast, fine-grained carbonate facies were less cemented, and thus, porosity enhancement by cement dissolution was insignificant. Temperature profiles of oil inclusions in the dolomite, calcite, and anhydrite minerals characterized by distinct variations in the homogenization temperatures (Th) that are divided into two ranges below 50°C in anhydrites and from 45°C to 125°C in dolomites and calcites. The lower Th ranges for anhydrite suggests that it may have formed at shallower burial depths during early to middle diagenesis. The oil inclusions display trend for increasing temperature downward which conform to Formation geothermal gradient. In other word, the decreasing trend of Th temperatures upward within Asmari Formation that can be observed in Th versus depth plot is consistent with the uplift events at Late Miocene time and later that caused removal of about 1,300 m of the crest of the Kuh-I-Mond anticline. Vitrinite reflectance data from source rock intervals in the field area do not support vertical migration of locally generated hydrocarbons into the Kuh-I-Mond accumulation, and long-distance lateral oil migration and charge from a source kitchen to the southwest is proposed. Vitrinite reflectance data from this dolomite and limestone reservoir suggest low maturation levels corresponding to paleotemperatures less than 50°C. The observed maturation level (<0.5% Ro) does not exceed values for simple burial maturation based on the estimated burial history. Also, homogenization temperatures from fluid inclusion populations in calcite and dolomites show expected good correlation with reflectance-derived temperatures. The Th data represent pore fluids became warmer and more saline during burial. As aqueous fluid inclusions in calcite veins were homogenized between 22°C and 90°C with a decrease in salinity from 22 to 18 eq.?wt.% NaCl. The Th values suggest a change in water composition and that dolomite and calcite cements might have precipitated from petroleum-derived fluids. The hydrocarbon fluid inclusions microthermometry data suggest that the reservoir was being filled by heavy black oils in reservoir during Cenozoic. Aqueous fluid inclusions hosted by calcite equant sparry/fossil cavity fills suggest low cementation temperatures (<45°C) and high salinities (19 eq.?wt.% NaCl), while those in dolostones are characterized by highly variable homogenization temperature (52°C to 125°C) and salinities (6.5 to 20 eq.?wt.% NaCl).     

大兴安岭岔路口斑岩钼矿床流体成分及成矿意义

岔路口超大型斑岩型钼矿床位于大兴安岭北段,以网脉状和角砾岩型矿化为主.该矿床经历了4个成矿阶段:Ⅰ.石英-钾长石;Ⅱ.石英-辉钼矿;Ⅲ.石英-多金属硫化物;Ⅳ.石英-萤石-方解石.包裹体的岩相学及激光拉曼研究揭示,石英斑晶内的熔体-流体包裹体中熔体成分有更长石和钠长石,为岩浆出溶作用形成;子矿物多相包裹体(S型)中含有钾盐、石盐、赤铁矿和石膏等子矿物,显示出成矿流体为高氧逸度.第Ⅰ成矿阶段包裹体有气液两相(L+V型)、富CO₂三相(C型)和含石盐、钾盐、赤铁矿及硬石膏等子矿物的多相(S型)等类型,第Ⅱ成矿阶段除了有L+V型、C型以及含钾盐、石盐、黄铜矿和辉钼矿等子矿物多相(S型)外,还可以见到S型包裹体与气相包裹体(V型)共存;第Ⅲ成矿阶段以L+V型和含方解石的S型包裹体为主;第Ⅳ成矿阶段除见到L+V型包裹体外,还可以见到液相包裹体(L型).显微测温结果显示从早到晚,流体包裹体均一温度从530 ℃变为120 ℃、盐度从66.7% NaCl equiv变为1.2% NaCl equiv,呈现逐渐降低的趋势.群体包裹体成分显示各阶段均含有气相CO₂,液相成分中Na+,K+,Ca2+,SO₄2-,Cl-含量很高,而F-含量极少.成矿流体总体属于富含CO₂的高盐度、高氧逸度的NaCl-H₂O-CO₂体系,在流体演化过程中温度、氧逸度、盐度和CO₂含量逐渐降低.温度、盐度、CO₂含量逐渐降低及绢云母化影响了矿石沉淀.      

Fluid Inclusions and Hydrogen,Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit,Northern Taihang Mountains,China

The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO₂–H₂O inclusions, and pure CO₂ inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO₂–H₂O to the NaCl–H₂O system. The δ¹⁸O_H2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (²⁰⁸Pb/²⁰⁴Pb, 36.320–37.428; ²⁰⁷Pb/²⁰⁴Pb, 15.210–15.495; ²⁰⁶Pb/²⁰⁴Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.     

Hypervelocity collisions into continental crust composed of sediments and an underlying crystalline basement: comparing the Ries (∼24 km) and Chicxulub (∼180 km) impact craters

The Chicxulub and Ries impact craters were excavated from layered continental terrains that were composed of carbonate-bearing sedimentary sequences and underlying crystalline silicate basement materials. The Chicxulub and Ries impact events were sufficiently large to produce complex peak-ring impact craters. The walls of transient craters and excavation cavities, with diameters of 12-16 km for the Ries and 90-100 km for Chicxulub, collapsed to form final crater diameters of ∼24 and ∼180 km, respectively. Debris from both the sedimentary and crystalline layers was ejected during crater formation, but the bulk of the melting occurred at depth, in the silicate basement. The volume of melt and proportion of melt among shock-metamorphosed debris was far larger at Chicxulub, producing a central melt sheet ∼3 km in depth. The central melt sheet was covered with melt-bearing polymict breccias and, at the Ries, similar breccias (crater suevites) filled the central cavity. Also at the Ries (and presumably at Chicxulub), large hill-size megablocks of crystalline basement material were deposited near the transient crater rim. Blocks and megablocks of sedimentary lithologies were ejected into the modification zone between the peak ring and final crater rim, while additional material was slumping inward during crater growth, and buried beneath a fallout deposit of melt-bearing polymict breccias. The melt and surviving clasts in the breccias are dominantly derived from the deeper, basement lithologies. At greater distances, however, the ejecta is dominated by near-surface sedimentary lithologies, large blocks of which landed with such high energy that they scoured and eroded the pre-existing surface. The excavation and ejecta pattern produced lithological and chemical variations with radial distance from the crater centers that evolve from basement components near the crater centers to sedimentary components far from the crater centers. In addition, carbonate (and anhydrite in the case of Chicxulub) was vaporized, producing environmentally active gases. The vaporized volume produced by the Ries impact event was too small to dramatically alter the evolution of life, but the vaporized volume produced by the Chicxulub impact event is probably a key factor in the Cretaceous-Tertiary boundary mass extinction event.     

Micrometallogeny and hydrothermal fluid evolution of the Iju porphyry Cu deposit,NW Kerman,Iran: Evidence from fluid inclusions,Laser Raman spectroscopy,and SO isotope systematics

The Iju Cu porphyry is located in the NW part of the Kerman Magmatic Copper Belt (KMCB). It is related to a ~ 9 Ma granodiorite porphyry intrusion, with three main stages of hydrothermal activity. The homogenization temperatures for the fluid inclusions are in the ranges of 200–494 °C, and their salinities vary from 4.0 to 42.8 wt% NaCl equiv., which are typical magmatic-hydrothermal fluids. The δ³⁴S values of sulfides range from −0.4 to +3.2 ‰ (V-CDT), and the δ³⁴S values of anhydrite samples range from +11.6 to +16.8 ‰. The δ³⁴S values of sulfides show a narrow range, implying a homogeneous sulfur source. The oxygen isotopic composition of hydrothermal water in equilibrium with quartz samples ranges from +3.4 to +6.0 ‰ (V-SMOW) consistent with the hydrothermal fluids having a magmatic signature, but diluted with meteoric waters in the main mineralizing stage. The most important factors responsible for metal precipitation in the Iju porphyry deposit are fluid boiling, oxygen fugacity decrease and cooling followed by dilution with meteoric water. The primary fluids of the Iju Cu deposit are characterized by relatively high temperature and moderate salinity, and are CO₂-rich, indicating a typical post-collisional porphyry system.     

Fluid inclusion studies of the Felbertal scheelite deposit

Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions:

1. H₂O-CO₂ fluid inclusions are characterized by variable amounts of CO₂ up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO₂-bearing fluid inclusions a methane component is evident from microthermometrical data (T_mclath >10.0 °C combined with T_mCO₂
2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C.

Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.     

Geochemistry of the Ore-Forming Fluids in Gold Deposits from the Taihang Mountains,Northern China

Gold deposits in the Taihang Mountains, northern China, mainly consist of quartz sulfide veins in granitoid plutons. This paper describes the geological setting of the gold deposits, and presents the results of microthermometric, Fourier transform infrared spectra, and stable isotope analyses of ore—forming fluids for the purpose of examining the characteristics of these fluids. The ore—forming fluid was of high temperature (up to 380°C) and high salinity (33–41 wt% NaCl equiv.), represented by type I inclusions (with daughter minerals). This fluid evolved to low salinity at low temperatures recorded in type II (liquid-rich) and III inclusions (vapor—rich). Primary type II inclusions coexist with type III inclusions in quartz. Type III inclusions have almost the same homogenization temperatures as type II inclusions. This probably reflects boiling. The secondary fluid inclusions homogenized at lower temperatures, and have lower salinities than primary inclusions. Based on microthermometric data, we propose that the high—temperature fluid that separated from residual magma corresponded to the ore—forming fluid represented by type I inclusions. This fluid mixed with meteoric water in the upper part of the granitic pluton and was diluted. The diluted fluid boiled, probably due to abrupt pressure decrease, and formed liquid—rich type II inclusions and vapor—rich type III inclusions. The deposition of sulfide minerals and gold probably occurred during boiling.     

Fluid evolution of the Chalukou giant Mo deposit in the northern Great Xing'an Range,NE China

The Chalukou giant Mo deposit in the Heilongjiang Province, northeastern China, is a porphyry deposit hosted in an intermediate‐felsic complex surrounded by Mesozoic volcano–sedimentary rocks. The mineralization process is composed of four stages, including quartz + K‐feldspar (Stage I), quartz + molybdenite (Stage II), pyrite + chalcopyrite + quartz ± other sulphides (Stage III) and carbonate ± fluorite ± quartz (Stage IV). The mineralization is generally associated with intense K‐feldspar‐, fluorite‐, phyllic‐ and propylitic alteration. Primary fluid inclusions (FIs) in quartz include four compositional types, i.e. pure carbonic (PC‐type), aqueous‐carbonic (C‐type), daughter mineral‐bearing (S‐type) and aqueous (W‐type) inclusions. Halite, sylvite and hematite are recognized as the daughter minerals in Stage I S‐type FIs, whereas molybdenite and chalcopyrite occur as daughter minerals in Stage II S‐type FIs. High‐salinity and high pressure (>220 MPa) FIs exist in Stage I quartz veins, characterized by homogenization through halite dissolution at temperatures of 324 to 517 °C. The paucity of coexisting vapour‐rich FIs with similar homogenization temperatures at this stage indicates that the initial S‐type inclusions have directly exsolved from the magma rather than boiling off of a low‐salinity vapour. Stage I quartz has captured the C‐ and W‐type FIs, which have totally homogenized at 270–530 °C with salinities of 1.6–17.0 wt.% NaCl equiv. At Stage II, the coexistence of all FI types were only observed at pressures of 150–218 MPa and temperatures of 352–375 °C, with two salinity clusters of 0.9–16.6 wt.% NaCl equiv. and 37–56 wt.% NaCl equiv. Stage III quartz contains W‐type FIs with homogenization temperatures of 158–365 °C, salinities of 0.5–9.0 wt.% NaCl equiv., and minimum pressures of 12–116 MPa; whilst Stage IV fluorite or calcite only contains W‐type FIs with homogenization temperatures of 121–287 °C, salinities of 0.5–5.3 wt.% NaCl equiv., and minimum pressures of 10–98 MPa. The estimated trapping pressure from Stages II to III suggests an alternating lithostatic–hydrostatic fluid‐system caused by fluid boiling. Ore fluids at the Chalukou Mo deposit may have been evolved from a CO₂‐rich, high‐salinity, and high‐oxygen fugacity (fO₂) magma system, to a CO₂‐poor, low‐salinity, and low‐fO₂ epithermal system. Two key points may have contributed to the formation of the Chalukou giant Mo deposit: The magmatic origin and fluid boiling that has resulted in decompression and rapid precipitation of metals. Copyright © 2014 John Wiley & Sons, Ltd.     

吉林永吉县大黑山斑岩型钼矿床成矿流体地球化学特征及成矿机制

大黑山钼矿床位于张广才岭-小兴安岭成矿带南段,矿体主要赋存在花岗闪长岩和花岗闪长斑岩内。含矿石英脉中主要发育气液两相包裹体（W型）和含子矿物三相包裹体（S型）,偶见含CO₂包裹体。成矿早阶段含矿石英脉中主要发育W型、S型包裹体和少量含CO₂包裹体,均一温度为208～443 ℃,盐度（w（NaCl））为2.9%～49.8%,流体密度为0.5～1.2 g·cm^-3;主成矿阶段含矿石英脉中发育W型、S型包裹体和少量含CO₂包裹体,子矿物为石盐和金属硫化物,均一温度为197～398 ℃,盐度为1.6%～43.9%,流体密度为0.5～1.1 g·cm^-3;成矿晚阶段仅见气液两相包裹体（W型）,均一温度为171～301 ℃、盐度为1.6%～19.8%,流体密度为0.6～0.9 g·cm^-3。主成矿阶段流体包裹体类型多样,且具有相似的均一温度,压力范围为30～100 MPa,成矿深度约为4 km。成矿阶段早期流体沸腾作用和晚期流体混合作用是金属硫化物沉淀的主要机制。     

吉林省新华龙钼矿床流体包裹体

新华龙钼矿床位于中国东北地区吉林省东部,是一个新发现的斑岩型钼矿床。矿床产于花岗闪长斑岩中。矿床成矿阶段包括石英-浸染状辉钼矿、石英-网脉状辉钼矿、石英-黄铁矿-黄铜矿、石英-多金属硫化物和石英-碳酸盐化5个阶段。流体包裹体实验结果表明：流体包裹体的类型主要为气液两相包裹体,其次为纯气相和纯液相包裹体,还有少量含子矿物的多相包裹体。流体包裹体的均一温度为172～385 ℃,盐度(w(NaCl))为8.51%～45.44%。从早阶段到晚阶段成矿流体温度具有规律的演化,均一温度分别为360～390 ℃、270～350 ℃、250～260 ℃、220～230 ℃、170～190 ℃。其中:含子矿物多相包裹体均一温度为272～385 ℃,盐度为35.79％～45.44％,密度为1.07～1.08 g/cm³;气液两相包裹体均一温度为172～381 ℃,盐度为8.51％～23.36％,密度为0.70～0.99 g/cm³。激光拉曼光谱分析表明,包裹体的气体成分主要为CO₂、H₂O、N₂和CH₄。包裹体岩相学及测温表明,流体由早期的高温、高盐度、含二氧化碳的含矿流体在主成矿阶段发生流体包裹体的沸腾、CO₂逸出、温度降低等过程,导致大量金属硫化物沉淀。结合氢氧同位素特征,初步确定该矿床的成矿流体主要以岩浆水为主,后期有大气水的加入。流体沸腾是新华龙钼矿床成矿的重要机制。     

Abundance of CO<Subscript>2</Subscript>-rich fluid inclusions in a sedimentary basin-hosted Cu deposit at Jinman,Yunnan, China: implications for mineralization environment and classification of the deposit

The Jinman Cu deposit is hosted in sandstones and slates of the Jurassic Huakaizuo Formation in the Mesozoic to Cenozoic Lanping basin in western Yunnan, China. Despite the fact that Cu mineralization occurs mainly in quartz–carbonate veins controlled by faults and fractures, the Jinman deposit was classified as a sediment-hosted stratiform Cu deposit, mainly because it is hosted in a sedimentary basin characterized by abundant red beds with many stratiform Cu deposits. A detailed petrographic and microthermometric study of fluid inclusions from the Jinman deposit reveals the presence of abundant CO₂-rich fluid inclusions, together with aqueous inclusions. The CO₂-rich inclusions have CO₂ melting temperatures mainly from −58.0°C to −56.6°C, homogenization temperatures of the carbonic phase (mostly into the liquid phase) mainly between 22°C and 30°C, clathrate melting temperatures from 1.8°C to 9.2°C, with corresponding salinities from 1.6 to 13.4 wt.% NaCl equivalent, and total homogenization temperatures from 226°C to 330°C. The aqueous inclusions have first melting temperatures from −60°C to −52°C, ice melting temperatures from −41.4°C to −2.3°C, with salinities from 3.9 to 29.0 wt.% NaCl equivalent, and total homogenization temperatures mainly from 140°C to 250°C. These fluid inclusion characteristics are comparable to those of orogenic or magmatic mineralization systems and are uncharacteristic of basinal mineralization systems, suggesting that it is inappropriate to classify the Jinman deposit as a sediment-hosted stratiform Cu deposit. The results of this study, together with geochemical data reported previously, suggest that the Jinman deposit formed in a hydrothermal system that involved both extra-basinal, deeply sourced CO₂-rich fluid and basinal, aqueous fluid.