Retardations in fault creep rates before local moderate earthquakes along the San Andreas fault system,central California

Records of shallow aseismic slip (fault creep) obtained along parts of the San Andreas and Calaveras faults in central California demonstrate that significant changes in creep rates often have been associated with local moderate earthquakes. An immediate postearthquake increase followed by gradual, long-term decay back to a previous background rate is generally the most obvious earthquake effect on fault creep. This phenomenon, identified as aseismic afterslip, usually is characterized by above-average creep rates for several months to a few years. In several cases, minor step-like movements, called coseismic slip events, have occurred at or near the times of mainshocks. One extreme case of coseismic slip, recorded at Cienega Winery on the San Andreas fault 17.5 km southeast of San Juan Bautista, consisted of 11 mm of sudden displacement coincident with earthquakes ofM _L =5.3 andM _L =5.2 that occurred 2.5 minutes apart on 9 April 1961. At least one of these shocks originated on the main fault beneath the winery. Creep activity subsequently stopped at the winery for 19 months, then gradually returned to a nearly steady rate slightly below the previous long-term average.The phenomena mentioned above can be explained in terms of simple models consisting of relatively weak material along shallow reaches of the fault responding to changes in load imposed by sudden slip within the underlying seismogenic zone. In addition to coseismic slip and afterslip phenomena, however, pre-earthquakeretardations in creep rates also have been observed. Onsets of significant, persistent decreases in creep rates have occurred at several sites 12 months or more before the times of moderate earthquakes. A 44-month retardation before the 1979M _L =5.9 Coyote Lake earthquake on the Calaveras fault was recorded at the Shore Road creepmeter site 10 km northwest of Hollister. Creep retardation on the San Andreas fault near San Juan Bautista has been evident in records from one creepmeter site for the past 5 years. Retardations with durations of 21 and 19 months also occurred at Shore Road before the 1974 and 1984 earthquakes ofM _L =5.2 andM _L =6.2, respectively.Although creep retardation remains poorly understood, several possible explanations have been discussed previously. (1) Certain onsets of apparent creep retardation may be explained as abrupt terminations of afterslip generated from previous moderate-mainshock sequences. (2) Retardations may be related to significant decreases in the rate of seismic and/or aseismic slip occurring within or beneath the underlying seismogenic zone. Such decreases may be caused by changes in local conditions related to growth of asperities, strain hardening, or dilatancy, or perhaps by passage of stress-waves or other fluctuations in driving stresses. (3) Finally, creep rates may be lowered (or increased) by stresses imposed on the fault by seismic or aseismic slip on neighboring faults. In addition to causing creep-rate increases or retardations, such fault interactions occasionally may trigger earthquakes.Regardless of the actual mechanisms involved and the current lack of understanding of creep retardation, it appears that shallow fault creep is sensitive to local and regional effects that promote or accompany intermediate-term preparation stages leading to moderate earthquakes. A strategy for more complete monitoring of fault creep, wherever it is known to occur, therefore should be assigned a higher priority in our continuing efforts to test various hypotheses concerning the mechanical relations between seismic and aseismic slip.     

New observations on the 1939 Erzincan Earthquake surface rupture on the Kelkit Valley segment of the North Anatolian Fault Zone,Turkey

The 1939 Erzincan Earthquake (M = 7.8), occurred on the North Anatolian Fault Zone (NAFZ), was one of the most active strike-slip faults in the world, and created a 360-km-long surface rupture. Traces of this surface rupture are still prominently observed. In the absence of detailed mapping to resolve the fault characteristics, detailed observations have been conducted at 20 different points on the 70-km-long Kelkit Valley Segment (KVS) of the NAFZ's between Niksar and Koyulhisar. Field data defining fault character and slip amounts were found at eight points and show right-lateral slip varying between 1.8 and 4.25 m and the vertical slip varying between 0.5 and 2.0 m.The KVS developed in the most morphologically prominent and narrowest part of the NAFZ. Therefore, the chances of finding evidence of more than one historical earthquake in trenches opened to investigate palaeoseismological aspects are higher. Faults observed in foundation and channel excavations opened for energy purposes in the Reşadiye region show this clearly and evidence for up to four seismic events including the 1939 Erzincan Earthquake have been discovered. Further studies are required to discover whether right-lateral deformation on at some locations on this segment is surface ruptures associated with the 1939 earthquake or later creep.     

基于形变观测分析2011年日本9.0级地震与断层运动间关系

2011年3月11日日本发生9.0级地震,本文以此次地震的震间、同震和震后形变观测为约束,依据不同时段断层运动空间分布特征分析日本海沟地区强震与断层运动间关系.震间日本海沟地区,断层运动闭锁线深度约为60km,闭锁线以上从深到浅依次为断层运动强闭锁段、无震滑移段和弱闭锁段.由同震位错反演结果,2011年日本9.0级地震同震存在深浅两个滑移极值区,同震较浅的滑移极值区(同震位错量10~50m,深度小于30km)震间为断层弱闭锁段;同震较深的滑移极值区(同震位错量10~20m,深度在40km左右)震间为断层强闭锁段;而在两者之间的过渡带同震位错相对较小,震间断层运动表现为无震滑移.震后初期断层运动主要分布在在闭锁线以上的同震较深滑移极值区,而同震较浅的滑移极值区能量释放比较彻底,断层震后余滑量相对较小.依据本文同震和震间断层运动反演结果,震间强闭锁段积累10m同震位错需要100多年时间,与该区域历史上7级地震活动复发周期相当;震间弱闭锁段积累30~50m同震位错约需要300~600年时间,与相关研究给出的日本海沟9级左右地震复发周期比较一致.在实际孕震能力判定的工作中,由于不同性质的断层段在同震过程中会表现更多的组合形式,断层发震能力判定结果存在更多的不确定性,但利用区域形变观测等资料给出震间断层运动特征的研究工作对于断层强震发震能力的判定具有非常重要的实际意义.     

1966年邢台强震群震前、 同震和震后断层运动特征分析

在1966年3月邢台强震群水准观测基础上, 本文首先对同震位移和数值模拟结果进行了对比, 认为邢台强震群发震断层浅层是牛家桥阳断层和永福庄断层, 深部发震断层是倾向北西的北东向断层; 然后以区域水准观测为约束, 通过反演给出了邢台强震群震前断层无震滑移、 同震断层位错和震后断层余滑空间分布。 结果表明, 震前显著无震滑移主要发生在3月8日6.8级前震的发震断层上, 而3月20日宁晋7.2级和6.7级地震发震断层深部同震位错相对弱的断层段, 震前也存在较为明显的无震滑移; 震后断层余滑主要分布在束鹿凹陷西侧的牛家桥阳断层。 从邢台强震群过程中断层运动时空演化特征可以看出, 强震破裂成核过程中震前断层无震滑移既可能发生于前震发震断层, 也可能发生于主震发震断层, 震后断层位移空间分布与同震位错具有互补性; 而震前断层无震滑移是否为有关震前前兆的真正原因, 是值得进一步深入研究的问题。     

Coseismic deformation of the 2021 MW7.4 Maduo earthquake from joint inversion of InSAR,GPS, and teleseismic data

The M_W7.4 Maduo earthquake occurred on 22 May 2021 at 02:04 CST with a large-expansion surface rupture. This earthquake was located in the Bayan Har block at the eastern Tibetan Plateau, where eight earthquakes of M_S >7.0 have occurred in the past 25 years. Here, we combined interferometric synthetic aperture radar, GPS, and teleseismic data to study the coseismic slip distribution, fault geometry, and dynamic source rupture process of the Maduo earthquake. We found that the overall coseismic deformation field of the Maduo earthquake is distributed in the NWW-SEE direction along 285°. There was slight bending at the western end and two branches at the eastern end. The maximum slip is located near the eastern bending area on the northern branch of the fault system. The rupture nucleated on the Jiangcuo fault and propagated approximately 160 km along-strike in both the NWW and SEE directions. The characteristic source rupture process of the Maduo earthquake is similar to that of the 2010 M_W6.8 Yushu earthquake, indicating that similar earthquakes with large-expansion surface ruptures and small shallow slip deficits can occur on both the internal fault and boundary fault of the Bayan Har block.     

Coupling of tectonic loading and earthquake fault slips at subduction zones

Because of the viscoelastic behaviour of the earth, accumulation of elastic strain energy by tectonic loading and release of such energy by earthquake fault slips at subduction zones may take place on different spatial scales. If the lithospheric plate is acted upon by distant tectonic forces, strain accumulation must occur in a broad region. However, an earthquake releases strain only in a region comparable to the size of the rupture area. A two-dimensional finite-element model of a subduction zone with viscoelastic rheology has been used to investigate the coupling of tectonic loading and earthquake fault slips. A fault lock-and-unlock technique is employed so that the amount of fault slip in an earthquake is not prescribed, but determined by the accumulated stress. The amount of earthquake fault slip as a fraction of the total relative plate motion depends on the relative sizes of the earthquake rupture area and the region of tectonic strain accumulation, as well as the rheology of the rock material. The larger the region of strain accumulation is compared to the earthquake rupture, the smaller is the earthquake fault slip. The reason for the limited earthquake fault slip is that the elastic shear stress in the asthenosphere induced by the earthquake resists the elastic rebound of the overlying plate. Since rapid permanent plate shortening is not observed at subduction zones, there must be either strain release over a large region or strain accumulation over a small region over earthquake cycles. The former can be achieved only by significant aseismic fault slip between large subduction earthquakes. The most likely mechanism for the latter is the accumulation of elastic strain around isolated locked asperities of the fault, which requires significant aseismic fault slip between asperities.     

鲜水河断裂带炉霍段的震后滑动与形变

1973年2月在鲜水河断裂带炉霍段发生了M7.6地震破裂.自那以来,先后在炉霍县虾拉沱布设了若干横跨该地震断层(1973年破裂带)的地壳形变观测系统,包括断层近场的短基线、短水准、蠕变仪、人工构筑物等,以及断层近-远场的GPS观测站.利用这些观测系统的长期观测资料,本文分析了鲜水河断裂带炉霍段的震后滑动/变形及其时、空变化特征,并建立起解释这些特征的动力学模式.研究表明:(1)1973年地震后的头5年,地震断层在虾拉沱场地表现为开放性质,近场的断层震后滑动以无震左旋蠕滑为主,速率达到10.27 mm/a,且伴有微量的拉张性蠕动作用;1979年以来,左旋蠕滑速率由5.3 mm/a逐渐减小到2.27 mm/a,减小的过程呈对数函数型,反映此阶段断层面已逐渐重新耦合、正朝闭锁的方向发展,并伴有部分应变积累.(2)1999年以来,地震断层两侧远场的相对左旋位移/变形速率为10 mm/a,远大于同时期断层近场(跨距40~144 m)的左旋蠕滑速率0.66~2.52 mm/a;远-近场位移/形变速率的显著变化发生在地震断层两侧各宽约30 km的范围,显示出这是与大地震应力应变积累—释放相关的断裂带宽度.(3)结合动力学背景与深部构造信息,本文对这里断层的震后位移/变形及其时、空变化的机理进行初步解释,要点是:震后约5年之后,由于逐渐增大的断层滑动/摩擦阻抗,上地壳脆性层中的断层面由震后初期的开放性质逐渐转向重新耦合、并朝闭锁的方向发展,但其两侧地块深部持续的延性相对运动拖拽着浅部脆性层发生相应的弹性位移/变形.(4)可估计再经历15~25年,研究断裂段将完全"闭锁",即进入积累下一次大地震应力应变的震间闭锁阶段.     

A prototype earthquake warning system for strike-slip earthquakes

A prototype expert system has been developed to provide rapid warning of earthquakes while they are occurring. Warning times of up to 100 seconds will be possible. In the complete system, several accelerometers are distributed at intervals within a few kilometers of a known fault; data are telemetered to a central computer which implements the expert system. The expert system incorporates specific information about the type of fault to be monitored, and includes simple rules for estimating the fault slip, rupture length, and seismic moment, all in real time. If the seismic moment exceeds a preset value, an alarm may be issued. The prototype is designed for deployment on near-surface strike-slip faults such as the San Andreas and has been successfully tested with data from the 1979 Imperial Valley and 1984 Morgan Hill earthquakes. Crucial concepts have also been tested using synthetic data calculated for a model of the 1857 Fort Tejon earthquake. Parkfield, California, could be used as a test site.     

Detecting co-seismic displacements in glaciated regions: An example from the great November 2002 Denali earthquake using SPOT horizontal offsets

We use SPOT image pairs to determine horizontal offsets associated with the Mw 7.9 November 2002 Denali earthquake in the vicinity of Slate Creek, AK. Field measurements and aerial photographs are used to further characterize the geometry of the surface rupture. Aerial photographs show that shear localization occurs where the rupture trace is linear, and distributed off-fault deformation is common at fault bends and step-overs, or at geologic contacts between rock, glacial sediments, and ice. The displacement field is generated using a sub-pixel cross correlation technique between SPOT images taken before and after the earthquake. We identify the effects of glacier motion in order to isolate the tectonic displacements associated with the Denali earthquake. The resulting horizontal displacement field shows an along-strike variation in dextral shear, with a maximum of approximately 7.5 m in the east near 144° 52′W, which decreases to about 5 m to the west near 145° 45′W. If the November 2002 earthquake represents the long-term behavior of the Denali fault, it implies a westward decrease in the long-term dextral slip rate. A possible mechanism to accommodate the westward decreasing slip on the Denali fault is to transfer fault slip to adjacent east-trending contractional structures in the western region of the central Alaskan Range.     

A mechanical model for deformation and earthquakes on strike-slip faults

A two-dimensional model for stress accumulation and earthquake instability associated with strike-slip faults is considered. The model consists of an elastic lithosphere overlying a viscous asthenosphere, and a fault of finite width with an upper brittle zone having an elastoplastic response and a lower ductile zone having an elastoviscoplastic response. For the brittle, or seismic, zone the behavior of the fault material is assumed to be governed by a relation which involves strain hardening followed by a softening regime, with strength increasing with depth. For the fault material in the ductile, or aseismic, section, the viscous effect is included through use of a nonlinear creep law, and the strength is assumed to decrease with depth. Hence, because of the lesser strength and the viscous effect, continuous flow occurs at great depths, causing stress accumulation at the upper portion of the fault and leading to failure at the bottom of the brittle zone. The failure is initially due to localized strain softening but, with further flow, the material above the softened zone reaches its maximum strength and begins to soften. This process accelerates and may result in an unstable upward rupture propagation.Relations are developed for the history of deformation within the lithosphere, specifically for the velocity of particles within the fault and at the ground surface. The boundary-element method is used for a quantitative study, and numerical results are obtained and compared with the recorded surface deformation of the San Andreas fault. The effects of geometry and material properties on instability, on the history of the surface deformation, and on the earthquake recurrence time are studied. The results are presented in terms of variations of ground-surface shear strain and shear strain rate, and velocity of points within the fault at various times during the earthquake cycle.It is found that the location of rupture initiation, the possibility of a sudden rupture as opposed to stable creep, and also the ground deformation pattern and its history, all critically depend on the mechanical response of the material within the fault zone, especially that of the brittle section. Shorter earthquake recurrence times are obtained for shallower brittle zones and for a stiffer lithosphere. Lower viscosities of the aseismic zone and the absence of asthenospheric coupling tend to suppress instability and promote stable creep. The model results thus suggest that the overall viscosity of the ductile creeping zone must exceed a minimum value for a sudden upward propagating rupture to take place within the seismic section.     

汶川地震震中映秀地区地表破裂特征

汶川8级大震的震中位于映秀镇,地震在映秀地区造成了多处地表破裂,如公路拱曲、地震陡坎,坡中槽新变形等,长度达300余米.经实地全站仪和GPS测量,定量分析了地表破裂的垂直分量与水平分量以及两者之间的比值,以此揭示了映秀-北川断裂的运动性质为逆冲兼右行走滑,在映秀地区逆冲分量大于走滑分量.将本次地震造成的位错数据与震前资料对比,发现汶川地震产生的地表破裂位置与地质历史上映秀-北川断裂造成的断层位错位置是相当吻合的,说明映秀地区Ⅳ级阶地上40余米的的断层陡坎可能是地质历史时期若干次大地震的结果.     

The response of creeping parts of the San Andreas fault to earthquakes on nearby faults: Two examples

Rates of shallow slip on creeping sections of the San Andreas fault have been perturbed on a number of occasions by earthquakes occurring on nearby faults. One example of such perturbations occurred during the 26 January 1986 magnitude 5.3 Tres Pinos earthquake located about 10 km southeast of Hollister, California. Seven creepmeters on the San Andreas fault showed creep steps either during or soon after the shock. Both left-lateral (LL) and right-lateral (RL) steps were observed. A rectangular dislocation in an elastic half-space was used to model the coseismic fault offset at the hypocenter. For a model based on the preliminary focal mechanism, the predicted changes in static shear stress on the plane of the San Andreas fault agreed in sense (LL or RL) with the observed slip directions at all seven meters; for a model based on a refined focal mechanism, six of the seven meters showed the correct sense of motion. Two possible explanations for such coseismic and postseismic steps are (1) that slip was triggered by the earthquake shaking or (2) that slip occurred in response to the changes in static stress fields accompanying the earthquake. In the Tres Pinos example, the observed steps may have been of both the triggered and responsive kinds. A second example is provided by the 2 May 1983 magnitude 6.7 Coalinga earthquake, which profoundly altered slip rates at five creepmeters on the San Andreas fault for a period of months to years. The XMM1 meter 9 km northwest of Parkfield, California recorded LL creep for more than a year after the event. To simulate the temporal behavior of the XMM1 meter and to view the stress perturbation provided by the Coalinga earthquake in the context of steady-state deformation on the San Andreas fault, a simple time-evolving dislocation model was constructed. The model was driven by a single long vertical dislocation below 15 km in depth, that was forced to slip at 35 mm/yr in a RL sense. A dislocation element placed in the seismogenic layer under XMM1 was given a finite breaking strength of sufficient magnitude to produce a Parkfield-like earthquake every 22 years. When stress changes equivalent to a Coalinga earthquake were superposed on the model running in a steady state mode, the effect was to make a segment under XMM1, that could slip in a linear viscous fashion, creep LL and to delay the onset of the next Parkfield-like earthquake by a year or more. If static stress changes imposed by earthquakes off the San Andreas can indeed advance or delay earthquakes on the San Andreas by months or years, then such changes must be considered in intermediate-term prediction efforts.     

InSAR数据约束的2021年5月21日云南漾濞MS6.4地震发震构造研究

运用Sentinel-1A卫星数据和D-InSAR技术,获取2021-05-21云南漾濞M_S6.4地震的同震形变场。结果显示,漾濞地震同震形变场长轴近NW展布升降轨形变场符号相反,视线向最大沉降量和抬升量为0.1 m。InSAR同震形变场反演的滑动分布主要集中在沿走向2～12 km,倾向1～9 km的范围内,最大滑动量0.35 m,发震断层长9.8 km、宽4 km,滑动量主要集中在地下3～6 km范围内,滑动角-146.7°。同震位移场及滑动分布模型反映本次地震为发震断层的右旋走滑事件,地震破裂未达到地表。断层模型反演结果显示,矩震级为M_W6.1,发震断层以北西走向右旋走滑运动为主,初步认为本次M_W6.1地震发震断裂可能是一条NW向的维西—乔后断裂西侧的隐伏次生断裂。     

Characteristics of InSAR Coseismic Deformation and Slip Distribution of the Akto MS6.7 Earthquake,Xinjiang

The Akto M_S6. 7 earthquake occurred near the western end of the Muji fault basin in the top of the Pamir syntaxis. The main shock of this earthquake is complicated and the focal mechanism solutions based on the seismic wave inversions are different. Based on the Sentinel-1 SAR data,the coseismal deformation field of the earthquake is obtained by In SAR technique. Based on the elastic half-space dislocation model,the geometrical parameters and the slip distribution model are determined by nonlinear and linear inversion algorithms. The results show that the distributed slip model can well explain the coseismic deformation field. The earthquake includes at least two rupture events,which are located at 7 km(74. 11°E,39. 25°N)and 33 km(74. 49°E,39. 16°N)east from the epicenter according to the CENC. The deformation field caused by the earthquake shows a symmetry distribution,with the maximum LOS deformation of 20 cm. The main seismic slip is concentrated in the 0-20 km depth,and the maximum slip is 0. 84 m. The seismic fault is the Muji fault,and this earthquake indicates that the northeastward push of the Indian plate is enhanced.     

InSAR analysis of a blind thrust rupture and related active folding: the 1999 Ain Temouchent earthquake (M w 5.7, Algeria) case study

We study the surface deformation associated with the 22 December 1999 earthquake, a moderate sized but damaging event at Ain Temouchent (northwestern Algeria) using Interferometric Satellite Aperture Radar images (InSAR). The mainshock focal mechanism solution indicates reverse faulting with a NE–SW trending rupture comparable to other major seismic events of this section of the Africa–Eurasia plate boundary. Previously, the earthquake fault parameters were, however, poorly known because no aftershocks were precisely determined and no coseismic surface ruptures were observed in the field. Using a pair of ERS data with small baseline and short temporal separation in the ascending orbit we obtained an interferogram that shows the coseismic surface displacement field despite poor coherence. The interferogram measures four fringes and displays an ellipse-shaped lobe with ∼11 cm peak line-of-sight displacement. The elastic modeling using a boundary element method (Poly3Dinv) indicate coseismic slip reaching up to 1 m at 5 km depth on the N 57° E trending, dipping 32° NW Tafna thrust fault. The geodetic estimate of seismic moment is 4.7 × 10¹⁷ N m. (Mw 5.7) in is good agreement with seismological results. The elliptical shape of the surface displacement field coincides with the NE–SW trending Berdani fault-related fold. The consistency between the geological observations and InSAR solution shed light on the precise earthquake location and related Tafna fault parameters.     

P波随时间衰减:以两条加利福尼亚地震破裂带为例

地震预测是地震学研究一个基本目标,而理解地震周期是地震预测的重要环节.遗憾的是,由于地震断层带不但结构复杂,大地震前后短时间内的震源过程更是随时间迅速变化,这些复杂因素使得常规研究方法不再适用.一类特殊的微震成群地发生在主震断层几乎同一地点上,震源系数几乎相同,近年来地震学界通称其为震群(earthquakemultiplet).本文论证如何将这类特殊的微震作为一组人工震源来阐述美国西部两次大地震(LomaPrieta和MorganHill)的震后弛豫过程.在加利福尼亚LomaPrieta(1989年9月18日,M7.0)及MorganHill(1984年4月24日,M6.2)附近的主震破裂带中就发生了此类震群.其中有两组各包含11个重复地震的震群,分别位于这两个破裂带中,其波形资料质量高,波形及震级变化极小,因而可与实验室条件下的人工震源相比.这些震群地震资料可直接用于计算P波沿波程衰减(即t)的时间性变化,其方法的简单性及结果的精确性都与实验室水平相当.我们的结果显示,每个震群周围分别存在一个异常体,在其各自主震之后的10个月中,该异常体中的P波衰减迅速上升并降落.衰减峰值发生在LomaPrieta地震后2～3周,其震群深度为10.2km.此峰值在MorganHill地震后5～6个月发生,其震群中心深度为2.6km.这两个事例中,t波动峰值都超过此前获得的加利福尼亚大致同一地区t绝对值的100%[1].此结果显示了因同震裂隙张开和震后弛豫过程(如流体移动、裂隙复原及岩石压缩),以及孔隙度和流体饱和度在主震源体部分区域发生的变化.衰减达峰值的时间之显著差异则提示我们,裂隙闭合及伴随的流体移动是负载敏感的,深度越大达峰值越快,反之亦然.如将此方法应用于主震前多重地震的资料,将有望更好地理解最终导致主震断层带大破裂的震前微破裂的物理过程.     

2008年3月21日新疆于田MS7.3 地震破裂过程研究

利用IRIS全球地震台网30°—90°的长周期P波记录, 反演了2008年3月21日新疆于田M_S7.3地震的破裂过程, 得到了此次地震的破裂时空图像, 并初步分析了余震分布与主震断层滑动量分布的关系. 结果表明, 此次地震是一个破裂尺度长100 km、 宽20 km的破裂过程; 破裂持续时间约为40 s, 在第13 s时地震矩释放速率达到峰值, 断层面上一次大的破裂行为几乎构成了整个地震的破裂过程. 地震所释放的标量地震矩为4.23×1019 N·m, 其矩震级为M_W7.02. 由主震断层静态滑动量分布图可以看出, 整个破裂区以正断左旋走滑为主, 显示出双侧破裂特征, 最大滑动量为151 cm, 位于初始破裂点沿断层出露地表处. 精定位后的余震在断层面上的投影结果显示, 80%以上M_L4.0—4.9余震和全部M_L≥5.0余震均发生在初始破裂点附近区域及其南西方向, 位于主震破裂滑动位移量迅速减小的区域, 反映了震源区介质强度的不均匀性.      

龙门山断层地震周期及其动力学过程模拟研究

在断层面上引入速率-状态相依摩擦本构关系、考虑铲形逆冲断层几何结构特征、断层下盘和上盘中下地壳及上地幔为黏弹性介质、上盘上地壳为弹塑性介质,本文用二维有限元动力学模型模拟了龙门山断层上大震准周期复发行为、分析了断层上地震孕育位置、地震周期不同阶段的应力/应变场演化特征.不同于近垂直走滑断层上的地震周期行为,大陆铲形逆冲断层上的构造应力的积累和释放过程更复杂、有其独特性.我们得到如下认识：（1）铲形逆冲断层上的地震复发是准周期行为.（2）龙门山断层最大库仑应力位于断层17~20 km深处,应力长期积累和同震释放都在此深度最大,说明地震会在此处孕育、发动.（3）在断层破裂的深部和浅部,同震滑动大小和构造应力释放大小并非同步,而是差异悬殊.（4）地震仅部分释放区域积累的应变能,断层上盘上地壳顶部和底部的褶皱、破裂等永久变形形式也是释放应变能的重要形式.（5）应变能密度增量的演化图像分为：震间、同震、震后期,清晰反应了龙门山断层附近的地震动力学过程.（6）地震发生除释放能量外,同时也对近断层的中地壳和断层底部有很大的应变能加载;这些加载,在震后期可能通过震后滑移、余震或中下地壳乃至上地幔的驰豫形变用几十年时间释放.以上对大陆内铲形逆冲断层上变形特征的了解,有助于我们在其地震周期行为中评估地震危险性.

     

Coseismic deformation of the 2020 Yutian MW 6.4 earthquake from Sentinel-1A and the slip inversion

A remarkable earthquake struck Yutian, China on June 26th, 2020. Here, we use Sentinel-1 images to investigate the deformation induced by this event. We invert the InSAR observations using a two-step approach: a nonlinear inversion to constrain fault geometries with uniform slip based on the rectangular plane dislocation in an elastic half-space, followed by a linear inversion to retrieve the slip distribution on the fault plane. The results show that the maximum LOS displacement is 22.6 ​cm, and the fault accessed to the ruptured characteristics of normal faults with the minor left-lateral strike-slip component. The fault model indicates a 210° strike. The main rupture zone concentrates in the depth of 5–15 ​km, and the fault slip peaks at 0.89 ​m at the depth of 9 ​km. Then, we calculate the variation of the static Coulomb stress based on the optimal fault model, the results suggest that the Coulomb stress of the Altyn Tagh fault and other neighboring faults has increased and more attention should be paid to possible seismic risks.     

郯庐断裂带白山-卅铺段第四纪以来的活动习性

根据构造地貌遥感解析,发现郯庐断裂带沿庐江白山到桐城卅铺一线显示1组平行断层,现场地震地质调查验证其为1组活动断层。通过断层剖面观测、样品采集及样品测试分析和宏微观构造分析,结果表明,郯庐断裂带在白山—卅铺一带第四纪以来仍具有黏滑、蠕滑交替的变形活动。其中,在柯坦—卅铺一带,最年轻的水系被NE向断层组右旋扭折,其断层物质的微观观测和测龄结果表明该断裂段第四纪时的活动具有脆、塑性过渡变形特征,强烈活动时间处于早、中更新世;而白山剖面断层泥年龄测试结果则反映相应断层段在中、晚更新世曾有过较强烈的活动。断层泥超微(SEM)和显微观测结果亦表明该断裂段曾发生黏滑、蠕滑交替的构造变形事件,且表现为先黏滑后蠕滑;结合水系呈现缓慢扭折表征,近年来沿断裂有不少微震发生,表明郯庐断裂带在白山—卅铺段的最新滑移方式主要表现为蠕滑,也就是说,该段积累的应力以蠕滑或微震等方式缓慢释放,据此推测未来一定时期内不易孕育强烈地震