Influence of late Holocene hillslope processes and landforms on modern channel dynamics in upland watersheds of central Nevada

Stratigraphic, geomorphic, and paleoecological data were collected from upland watersheds in the Great Basin of central Nevada to assess the relationships between late Holocene climate change, hillslope processes and landforms, and modern channel dynamics. These data indicate that a shift to drier, warmer climatic conditions from approximately 2500 to 1300 YPB led to a complex set of geomorphic responses. The initial response was massive hillslope erosion and the simultaneous aggradation of both side-valley alluvial fans and the axial valley system. The final response was fan stabilization and axial channel incision as fine-grained sediments were winnowed from the hillslope sediment reservoirs, and sediment yield and runoff processes were altered. The primary geomorphic response to disturbance for approximately the past 1900 years has been channel entrenchment, suggesting that the evolutionary history of hillslopes has produced watersheds that are prone to incision. The magnitude of the most recent phase of channel entrenchment varies along the valley floor as a function of geomorphic position relative to side-valley alluvial fans. Radial fan profiles suggest that during fan building, fan deposits temporarily blocked the flow of sediment down the main stem of the valley, commonly creating a stepped longitudinal valley profile. Stream reaches located immediately upvalley of these fans are characterized by low gradients and alternating episodes of erosion and deposition. In contrast, reaches coincident with or immediately downstream of the fans exhibit higher gradients and limited valley floor deposition. Thus, modern channel dynamics and associated riparian ecosystems are strongly influenced by landforms created by depositional events that occurred approximately 2000 years ago.     

Sediment budget analysis of slope–channel coupling and in-channel sediment storage in an upland catchment, southeastern Australia

Slope–channel coupling and in-channel sediment storage can be important factors that influence sediment delivery through catchments. Sediment budgets offer an appropriate means to assess the role of these factors by quantifying the various components in the catchment sediment transfer system. In this study a fine (< 63 µm) sediment budget was developed for a 1.64-km² gullied upland catchment in southeastern Australia. A process-based approach was adopted that involved detailed monitoring of hillslope and bank erosion, channel change, and suspended sediment output in conjunction with USLE-based hillslope erosion estimation and sediment source tracing using ¹³⁷Cs and ²¹⁰Pb_ex. The sediment budget developed from these datasets indicated channel banks accounted for an estimated 80% of total sediment inputs. Valley floor and in-channel sediment storage accounted for 53% of inputs, with the remaining 47% being discharged from the catchment outlet. Estimated hillslope sediment input to channels was low (5.7 t) for the study period compared to channel bank input (41.6 t). However an estimated 56% of eroded hillslope sediment reached channels, suggesting a greater level of coupling between the two subsystems than was apparent from comparison of sediment source inputs. Evidently the interpretation of variability in catchment sediment yield is largely dependent on the dynamics of sediment supply and storage in channels in response to patterns of rainfall and discharge. This was reflected in the sediment delivery ratios (SDR) for individual measurement intervals, which ranged from 1 to 153%. Bank sediment supply during low rainfall periods was reduced but ongoing from subaerial processes delivering sediment to channels, resulting in net accumulation on the channel bed with insufficient flow to transport this material to the catchment outlet. Following the higher flow period in spring of the first year of monitoring, the sediment supplied to channels during this interval was removed as well as an estimated 72% of the sediment accumulated on the channel bed since the start of the study period. Given the seasonal and drought-dependent variability in storage and delivery, the period of monitoring may have an important influence on the overall SDR. On the basis of these findings, this study highlights the potential importance of sediment dynamics in channels for determining contemporary sediment yields from small gullied upland catchments in southeastern Australia.     

Factors influencing the presence or absence of tributary-junction fans in the Iberian Range, Spain

This paper analyses the factors which influence the presence or absence of tributary-junction fans in the Iberian Range, northern Spain. Two valleys were selected, both characterised by wide variations in lithology, altitude, land use and plant cover. Two groups of factors were studied: those related to the internal characteristics of the drainage basins, which particularly control sediment generation; and those related to the characteristics of the depositional area which control accommodation space and main river power. Among the internal factors, the development of alluvial fans was related to: (i) the capacity of the basin to yield large volumes of sediment, (ii) the occurrence of intense human pressure until recent times, a good indicator of sediment yield, and (iii) the capacity of the basin to quickly increase discharge during rainstorms (discharge density and torrentiality). It is suggested that the areas that were intensively cultivated in the past, and have therefore been affected by intense erosion, have played a decisive role on the development of alluvial fans. This would imply that many of these alluvial fans have a relatively recent origin, perhaps related to the beginning of a widespread deforestation. The basins without alluvial fans are characterised by relatively steep hillslope gradients (that is, slopes that never were subjected to historical cultivation), low drainage densities and dense forest and shrub cover, mostly coinciding with high altitude basins composed of quartzite and shale bedrocks. Regarding the external factors, the shape, size and longitudinal gradient of the main river to which the fans are tributary are the most relevant conditioning factors determining the development of alluvial fans.     

Channel bed adjustments following major aggradation in a steep headwater setting: findings from Oyabu Creek, Kyushu, Japan

A typhoon in 1993 induced major aggradation along Oyabu Creek, a steep, gravel bed mountain stream in Kyushu, Japan. Processes of sediment reworking are inferred from a 7-year monitoring program that measured adjustments to channel cross-sections, the longitudinal profile, and the extent/distribution of bedrock outcrops along a 3-km study reach. Over time, the reach adopted a riffle and pool structure, with notable increase in the area of exposed bedrock on the bed. This adjustment process was characterised by progressive reduction in sediment storage change per unit flow. The relaxation pathway following disturbance induced by the typhoon was shaped by the magnitude and frequency of subsequent rainfall events, the capacity of these events to transport available sediments, and physical linkages between reaches. Adjacent subreaches demonstrated differing relaxation pathways in response to these influences, induced by spatial and temporal variability in threshold conditions along the channel. Longer-term evidence indicates that responses to major disturbance, such as the 1993 typhoon, occur as ‘cycles’ of around 20-year duration. A relaxation period of 7 years is required to attain a quasi-equilibrium bed configuration and rate of sediment flux. The timeframe of cycles is considered to reflect changes to hillslope–channel bed coupling, marking the period required to generate sufficient sediment stores to reactivate phases of aggradation and subsequent degradation.     

Trends of grain sizes on gravel bars in the Rio Chagres, Panama

We examined the trends of grain sizes along the upper 414 km² of the mountainous Rio Chagres drainage basin in Panama. Gravel bars were sampled along 40 km of the Rio Chagres and five major tributary streams using a transect pebble count of median diameter, lithology, and clast rounding. Although previous investigators have found that downstream fining can be obscured by inputs of colluvial sediment and other local controls in mountain drainages, we decided to examine the trends of grain sizes along a tropical mountain river where rapid weathering and high capability of transport might be capable of overriding the input effects of colluvium. Specifically, we tested the hypotheses that downstream fining would be present as a result of selective sorting, and that weak felsic particles would decrease in size preferentially to strong mafic particles because of abrasion. Statistical analyses reveal a weak downstream decrease of sediment size on gravel bars along the study reach of the Rio Chagres, with a Sternberg diminution coefficient (α) for felsic and mafic grains of − 0.013 and − 0.017, respectively. Felsic clasts have thicker weathering rinds and become rounded downstream faster than mafic particles, but tumbling-mill tests of abrasion show no significant differences in rate of mass loss in relation to lithology, and downstream decreases in grain size are similar between lithologies. Dividing the study reach into six sub-reaches bounded by major tributary junctions, we further tested the hypothesis that downstream trends in fining might be obscured at the basin scale by sediment input from tributaries, but that trends in grain sizes might be more visible at the reach scale between tributaries. We did not find any consistent trends in grain size between tributaries. Stream width appears to assert a local control on grain size; coarse particles are associated with narrow channel reaches, whereas smaller particles are associated with wide channel reaches.     

Conceptual model of sediment processes in the upper Yuba River watershed, Sierra Nevada, CA

This study examines the development of a conceptual model of sediment processes in the upper Yuba River watershed; and we hypothesize how components of the conceptual model may be spatially distributed using a geographical information system (GIS). The conceptual model illustrates key processes controlling sediment dynamics in the upper Yuba River watershed and was tested and revised using field measurements, aerial photography, and low elevation videography. Field reconnaissance included mass wasting and channel storage inventories, assessment of annual channel change in upland tributaries, and evaluation of the relative importance of sediment sources and transport processes. Hillslope erosion rates throughout the study area are relatively low when compared to more rapidly eroding landscapes such as the Pacific Northwest and notable hillslope sediment sources include highly erodible andesitic mudflows, serpentinized ultramafics, and unvegetated hydraulic mine pits. Mass wasting dominates surface erosion on the hillslopes; however, erosion of stored channel sediment is the primary contributor to annual sediment yield. We used GIS to spatially distribute the components of the conceptual model and created hillslope erosion potential and channel storage models. The GIS models exemplify the conceptual model in that landscapes with low potential evapotranspiration, sparse vegetation, steep slopes, erodible geology and soils, and high road densities display the greatest hillslope erosion potential and channel storage increases with increasing stream order. In-channel storage in upland tributaries impacted by hydraulic mining is an exception. Reworking of stored hydraulic mining sediment in low-order tributaries continues to elevate upper Yuba River sediment yields. Finally, we propose that spatially distributing the components of a conceptual model in a GIS framework provides a guide for developing more detailed sediment budgets or numerical models making it an inexpensive way to develop a roadmap for understanding sediment dynamics at a watershed scale.     

Natural levee deposition during the 2005 flood of the Saskatchewan River

In summer 2005, a controlled flood of the Saskatchewan River (east-central Saskatchewan, Canada) resulted in general floodplain inundation and extensive natural levee deposition along a 60-km reach extending from 40 km below the E.B. Campbell dam to Cumberland Lake. Levee crests along channel banks were inundated for up to 7 weeks in some areas of the floodplain. New deposits on levee crests varied from 0 to 70 cm in thickness, displaying large variations both along reach and in opposing sites across channels. Mean grain sizes, mainly silt and very fine sand, likewise varied considerably among sample sites.Pre- and post-flood surveys of channel cross sections along the flooded reach permitted assessments of relationships between channel-area changes and patterns of levee sedimentation in this system in which virtually all new flood sediment was derived by channel scour. Results show that both net deposition and net erosion occurred within the channel cross sections, but that on average, net channel enlargement of 4.2% prevailed over the entire survey reach when weighted by cross-section size. Over the 60-km flooded reach, zones of thick levee deposition occur at or just downstream of two areas of major channel enlargement, and an intermediate zone of thin levee deposits is associated with an intermediate area of net channel aggradation. This bimodal distribution of flood-deposit thickness is inferred to have resulted from differences in sediment supply produced locally by the different extents of channel-perimeter erosion. Two other factors—(1) position of interfacial zones between clear floodbasin water and turbid channel water, and (2) difference in pre-flood levee heights—contributed to the poor correspondence in thickness and grain size between opposing levees at some sites. Additional features of the new levee deposits, including increases in transverse slopes, abrupt basinward fining, and paucity of deposition in distal areas due to clear floodbasin waters, are characteristic of strong front loading that results when suspended sediment production is restricted to channel erosion processes.     

CHANNEL CHANGES IN ARID BADLANDS,BORREGO SPRINGS,CALIFORNIA

Geometric, hydraulic, and sediment characteristics in arid badlands near Borrego Springs, California, are examined in relation to precipitation events of varying magnitude and frequency. The longitudinal and cross profiles of five ephemeral channels occupying a 2.5 km² catchment were surveyed under pre-and post-storm conditions during the February 1976-December 1978 period. Such arid region channels offer the opportunity to observe and explain rates and methods of profile change under different flow types in a short period of time. Catchment responses to light winter events include substantial lags between initial precipitation and channel runoff, the limited downstream movement of small slugs of sediment, high losses of discharge into channel alluvium, and prolonged mass movement of debris from adjacent hillslopes into the channels following the storm events thus promoting aggradation along certain channel reaches. Responses to intense summer storms include explosive channel and hillslope runoff and localized scour and fill, both during and following such events, thereby promoting substantial aggradation and erosion along portions of the channels. Although ephemeral flow conditions may produce channel profiles which are distinct from those in perennial streams, the evaluation of the methods of sediment transport and the storage of debris in arid catchments offer useful explanation for other environments.     

红山水库上游河床及支流调整分析

以西辽河红山水库修建后上游河道调整为例，说明了除来水来沙等的变化所引起的河流系统调整外，存在由于河流系统可调要素之间的相互联系，相互作用，在水库水位上升后造成的溯源淤积发展中，主、支流河道、上、下游河段冲淤相互影响，槽，滩淤积相互转换，地生态系统调整的影响下，产生的可调要素的复杂多向的调整过程。     

Modelling the impact of land-use change and farm dam construction on hillslope sediment delivery to rivers at the regional scale

Landscapes in southeastern Australia have changed dramatically since the spread of European colonisation in the 19th century. Due to widespread forest clearance for cultivation and grazing, erosion and sediment yields have increased by a factor of more than 150. In the 20th century, erosion and sediment yield were reduced again due to an increasing vegetative cover. Furthermore, during the last decades, thousands of small farm dams were constructed to provide drinking water for cattle. These dams trap a lot of sediment, thereby further reducing sediment delivery from hillslopes to river channels. Changes in sediment delivery since European colonisation are documented in sediment archives. Within this study, these changing rates in hillslope erosion and sediment delivery were modelled using a spatially distributed erosion and sediment delivery model (WATEM/SEDEM) that was calibrated for Australian ecosystems using sediment yield data derived from sedimentation rates in 26 small farm dams. The model was applied to the Murrumbidgee river basin (30,000 km²) under different land-use scenarios. First, the erosion and sediment yield under pre-European land-use was modelled. Secondly, recent land-use patterns were used in the model. Finally, recent land-use including the impact of farm dams and large reservoirs was simulated. The results show that the WATEM/SEDEM model is capable of predicting the intensity of the geomorphic response to changes in land-use through time. Changes in hillslope erosion and hillslope sediment delivery rates are not equal, illustrating the non-linear response of the catchment. Current hillslope sediment supply to the river channel network is predicted to be 370% higher compared to the pre-European settlement period, yet farm dams have reduced this back to 2.5 times the pre-19th century values. The role of larger reservoirs is even more important as they have reduced the current sediment supply downstream to their pre-European values, thus completely masking the increased hillslope erosion rates from land-use change. However, the model does so far not include valley widening and sediment storage in river systems. Therefore, modelled rates of sediment delivery are lower than observed values.     

High-Resolution Analysis of Debris Flow–Induced Channel Changes in a Headwater Stream,Ashio Mountains,Japan∗

Coupled hillslope and channel processes in headwater streams (HWS) lead to rapid changes in channel dimensions. Changes in channel size and shape caused by a debris flow event along the length of a headwater stream in the Ashio Mountains, Japan, were captured with the aid of repeat high-definition surveys using terrestrial laser scanning (TLS) techniques. The HWS was classified into three distinct reaches below the debris flow initiation zone. A large knickpoint separated an upper bedrock reach from a colluvial reach along the midsection of the drainage. The colluvial reach transitioned to a lower bedrock reach that terminated at the master stream. Cross-sectional and morphometric analyses revealed no statistically significant changes in channel size or shape along the upper bedrock reach. Debris flow erosion generated significant differences in channel size and shape along a colluvial reach. Sediment bulking associated with erosion along the colluvial reach led to increases in channel size along the lower bedrock reach, but no statistical differences in channel shape. Morphometric analyses from the TLS point cloud revealed that debris flow erosion produced a distinct nonlinear change in channel dimensions in the downstream direction within the HWS. Variations in channel substrate along the length of HWS contributed directly to this nonlinear response. The episodic nature and nonlinearity of erosion associated with the current debris flow event highlights the importance of debris flows in general in understanding the transport of sediment, coarse to fine particulate organic material, and large woody debris, which are critical to the long-term management of riverine environments. TLS sampling methods show promise as one component of a multianalytical approach needed to continuously monitor and manage the dynamics of HWS.     

Post-wildfire erosion response in two geologic terrains in the western USA

Volumes of eroded sediment after wildfires vary substantially throughout different geologic terrains across the western United States. These volumes are difficult to compare because they represent the response to rainstorms and runoff with different characteristics. However, by measuring the erosion response as the erodibility efficiency of water to detach and transport sediment on hillslopes and in channels, the erosion response from different geologic terrains can be compared. Specifically, the erodibility efficiency is the percentage of the total available stream power expended to detach, remobilize, or transport a mass of sediment. Erodibility efficiencies were calculated for the (i) initial detachment, and for the (ii) remobilization and transport of sediment on the hillslopes and in the channels after wildfire in two different geological terrains.The initial detachment efficiencies for the main channel and tributary channel in the granitic terrain were 10 ± 9% and 5 ± 4% and were similar to those for the volcanic terrain, which were 5 ± 5% and 1 ± 1%. No initial detachment efficiency could be measured for the hillslopes in the granitic terrain because hillslope measurements were started after the first major rainstorm. The initial detachment efficiency in the volcanic terrain was 1.3 ± 0.41%. The average remobilization and transport efficiencies associated with flash floods in the channels also were similar in the granitic (0.18 ± 0.57%) and volcanic (0.11 ± 0.41%) terrains. On the hillslope the remobilization and transport efficiency was greater in the volcanic terrain (2.4%) than in the granitic terrain (0.65%). However, this may reflect the reduced sediment availability after the first major rainstorm (30-min maximum rainfall intensity  90 mm h^− 1) in the granitic terrain, while easily erodible fine colluvium remained on the hillslope after the first rainstorm (30-min maximum rainfall intensity = 7.2 mm h^− 1) in the volcanic terrain. The erosion response in channels and on hillslopes of the granitic and volcanic terrains was similar when compared using erodibility efficiencies.     

Response of bankfull discharge to discharge and sediment load in the Lower Yellow River

This paper presents a study on the response of bankfull discharge to incoming discharge and sediment load based on long-term hydrological and bankfull discharge data measured on the lower reaches of the Yellow River. The analysis indicated that the bankfull discharge was a function of the preceding 5 to 6 years' flow regimes, revealing that bankfull channel dimensions were a result of the accumulative effect of several consecutive years' flow discharge and sediment load conditions. In other words, the mean relaxation time was about 5 to 6 years for channel adjustment. Theoretical methods for the prediction of bankfull discharge were developed, in which the response time or the relaxation time was fully considered. Testing of the methods using data observed at five hydrologic stations in the lower reaches of the Yellow River from 1960 to 2003 showed that the proposed methods can predict the variation of bankfull discharge in response to changes in the incoming discharge and sediment load. The proposed methods hold promise for predicting the magnitude and trend of channel response to other rivers undergoing aggradation or degradation from changes in hydrologic or sediment regime.     

Differential responses of hillslope and channel elements to rainfall events in a semi-arid area

The degree of hydrological connectivity of hillslope elements in a semi-arid climate was studied at the season and event timescales. Field data were obtained in Rambla Honda, a Medalus project field site situated in SE Spain, on micaschist bedrock and with 300 mm annual rainfall. The season timescale was assessed using correlation analysis between soil moisture and topographic indices. The event timescale was studied by a quasi-continuous monitoring of rainfall, soil moisture, runoff and piezometric levels. Results show that widespread transfers of water along the hillslope are unusual because potential conditions for producing overland flow or throughflow are spatially discontinuous and extremely short-lived. During extreme events, runoff coefficients may be locally high (ca. 40% on slope lengths of 10 m), but decrease dramatically at the hillslope scale (<10% on slope lengths of 50 m). Two mechanisms of overland flow generation have been identified: infiltration excess, and local subsurface saturation from upper layers. The former occurs during the initial stages of the event while the latter, which is quantitatively more important, takes place later and requires a certain time structure of rainfall intensities that allow saturation of the topsoil and the subsequent production of runoff. Hillslopes and alluvial fans function as runoff sources and sinks respectively. Permanent aquifers are lacking in Rambla Honda. Variable proportions of hillslope areas may contribute to flash floods in the main channel, but their contribution to the formation of saturated layers within the sediment fill is very limited.     

Coupling relationships: Hillslope–fluvial linkages in the Hodder catchment, NW England

Variations in the coupling of sediment transfer between different parts of a fluvial catchment, e.g., hillslope to axial stream, can hamper understanding but are an integral part of the geomorphological record. Depositional environments respond to a combination of land use, climate, storms (floods), and autogenic conditioning. The distribution of sediment in the upland landscapes of NW England is out of equilibrium with contemporary climate and geomorphological processes; more a function of peri- and paraglacial mobilisation of glacigenic deposits. Soil and vegetation development after deglaciation have interrupted any progression toward sediment exhaustion with sediment release controlled largely by extrinsic perturbation, with late Holocene anthropogenic activity, climate and extreme hydrological events the likely candidates. This paper presents a new radiocarbon-dated Holocene geomorphological succession for the River Hodder (NW England), alongside evaluating new palaeoecological and geoarchaeological data to discern the impacts of human activity. These data show a late Holocene expansion in human occupation and use of the landscape since the Iron Age (700–0 cal. B.C.), with more substantial changes in the character and intensity of upland land use in the last 1300 years. The geomorphological responses in the uplands were the onset of considerable and widespread hillslope erosion (gullying) and associated alluvial fan development. Interpretation of the regional radiocarbon chronology limits gullying to four, more extensive and aggressive phases after 500 cal. B.C. The downstream alluvial system has responded with considerable valley floor deposition and lateral channel migration that augmented sediment supply by remobilising the existing floodplain terraces and led to the aggradation of a series of inset alluvial terraces. The timing of these changes between states of aggradation and incision in alluvial reaches reflects the increased connectivity between the hillslope and alluvial systems. Aspects of both the regional climate and land use histories are conducive to increasing discharge and sediment flux, but the region wide lowering of erosion thresholds appears a key driver conditioning these sediment-rich conditions and producing a landscape that was more susceptible to erosion under lower magnitude flows.     

Landsliding and sediment flux in the Central Swiss Alps: A photogrammetric study of the Schimbrig landslide, Entlebuch

This study explores the effects of hillslope mass failure on the sediment flux in the Waldemme drainage basin, Central Swiss Alps, over decadal time scales. This area is characterized by abundant landslides affecting principally flysch units and is therefore an important sediment source. The analysis concentrates on the Schimbrig landslide that potentially contributes up to 15% to the sediment budget of the Waldemme drainage basin. Volumetric changes are quantified using high-resolution elevation models that were extracted using digital photogrammetric techniques. Sediment discharge data were used to constrain the significance of the landslide for sediment flux in the channel network. The temporal extent of the photogrammetric analysis ranges from 1962 to 1998, including an earth slide event in 1994. The analyses reveal that during periods of low slip rates of the landslide, nearly all of the displaced sediments were eroded and supplied to the channel network. In contrast, during active periods, only a fraction of the displaced landslide mass was exported to the trunk stream. Interestingly, the 1994 earth slide event did not disturb the long-term sediment discharge pattern of the channel network, nor did it influence the sediment flux at a weekly scale. However, suspended sediment pulses correlate with higher-than-average precipitation events. This was especially the case in August 2005 when a storm event (> 100 years return period) triggered several debris flows and earth flows in the whole drainage basin and in the Schimbrig area. This storm did not result in a significant increase in the slip rates of the entire landslide's main body. It is therefore proposed that debris flows and earth flows perform the connectivity between hillslope processes (e.g. landsliding) and the trunk stream during and between phases of landslide activity in this particular setting.     

Seasonal variations of sediment discharge from the Yangtze River before and after impoundment of the Three Gorges Dam

Over the past decades, > 50,000 dams and reforestation on the Yangtze River (Changjiang) have had little impact on water discharge but have drastically altered annual and particularly seasonal sediment discharge. Before impoundment of the Three Gorges Dam (TGD) in June 2003, annual sediment discharge had decreased by 60%, and the hysteresis of seasonal rating curves in the upper reaches at Yichang station had shifted from clockwise to counterclockwise. In addition, the river channel in middle-lower reaches had changed from depositional to erosional in 2002.During the four years (2003–2006) after TGD impoundment, ~ 60% of sediment entering the Three Gorges Reservoir was trapped, primarily during the high-discharge months (June–September). Although periodic sediment deposition continues downstream of the TGD, during most months substantial erosion has occurred, supplying ~ 70 million tons per year (Mt/y) of channel-derived sediment to the lower reaches of the river. If sand extraction (~ 40 Mt/y) is taken into consideration, the river channel loses a total of 110 Mt/y. During the extreme drought year 2006, sediment discharge in the upper reaches drastically decreased to 9 Mt (only 2% of its 1950–1960s level) because of decreased water discharge and TGD trapping. In addition, Dongting Lake in the middle reaches, for the first time, changed from trapping net sediment from the mainstem to supplying 14 Mt net sediment to the mainstem. Severe channel erosion and drastic sediment decline have put considerable pressure on the Yangtze coastal areas and East China Sea.     

Initiation conditions for debris flows generated by runoff at Chalk Cliffs, central Colorado

We have monitored initiation conditions for six debris flows between May 2004 and July 2006 in a 0.3 km² drainage basin at Chalk Cliffs; a band of hydrothermally-altered quartz monzonite in central Colorado. Debris flows were initiated by water runoff from colluvium and bedrock that entrained sediment from rills and channels with slopes ranging from about 14° to 45°. The availability of channel material is essentially unlimited because of thick channel fill and refilling following debris flows by rock fall and dry ravel processes. Rainfall exceeding I = 6.61(D)^− 0.77, where I is rainfall intensity (mm/h), and D is duration (h), was required for the initiation of debris flows in the drainage basin. The approximate minimum runoff discharge from the surface of bedrock required to initiate debris flows in the channels was 0.15 m³/s. Colluvium in the basin was unsaturated immediately prior to (antecedent) and during debris flows. Antecedent, volumetric moisture levels in colluvium at depths of 1 cm and 29 cm ranged from 4–9%, and 4–7%, respectively. During debris flows, peak moisture levels in colluvium at depths of 1 cm and 29 cm ranged from 10–20%, and 4–12%, respectively. Channel sediment at a depth of 45 cm was unsaturated before and during debris flows; antecedent moisture ranged from 20–22%, and peak moisture ranged from 24–38%. Although we have no measurements from shallow rill or channel sediment, we infer that it was unsaturated before debris flows, and saturated by surface-water runoff during debris flows.Our results allow us to make the following general statements with regard to debris flows generated by runoff in semi-arid to arid mountainous regions: 1) high antecedent moisture levels in hillslope and channel sediment are not required for the initiation of debris flows by runoff, 2) locations of entrainment of sediment by successive runoff events can vary within a basin as a function of variations in the thickness of existing channel fill and the rate of replenishment of channel fill by rock fall and dry ravel processes following debris flows, and 3) rainfall and simulated surface-water discharge thresholds can be useful in understanding and predicting debris flows generated by runoff and sediment entrainment.     

黄河流域河型转化现象初探

黄河以其高含沙水流以及下游河道的高沉积速率而著称于世。迄今的研究, 主要针对黄河中下游流域的 侵蚀、水文泥沙和河床演变方面的研究, 而对黄河流域主支流发生河型转化的现象关注不够。在黄河的不同河段, 河型的变化频繁, 类型多样, 现象复杂, 是研究者不可回避的科学问题。本文选取黄河上游第一弯的玛曲河段、黄河 上游末段托克托附近河段及黄河下游高村上下河段来研究河型转化的形式及影响因素。玛曲河段沿流向发生网状 河型→弯曲河型→辫状河型的转化现象, 该系列转化呈现出由极稳定河型向极不稳定河型的转化, 这与世界上通 常可以观察到的沿流向不稳定河型向稳定河型转化的情况完全相反。这主要受到地壳的抬升、上下峡谷卡口、水动 力特征、边界沉积物特征及植被的区域分布等因素的控制。托克托附近沿流向发生了弯曲河型→顺直河型转化的 现象, 这是较稳定河型向极稳定河型的转化, 主要受到边界沉积物、水动力等因素的控制。高村上下河段沿流向发 生的辫状河型→弯曲河型转化的现象, 是由极不稳定河型向较稳定河型转化的现象, 河道边界沉积物及水动力是 其主要控制因素, 人工大堤只是限制了河道摆动的最大幅度, 对河型的性质影响不大, 但其上游河段修筑的水库导 致下泻的水流在辫状河段的侵蚀能力增强而使其边界沉积物粗化, 并将泥质物大量沉积在弯曲河段, 客观上促进 了河型的转化。     

Hydraulic and sedimentary processes causing anastomosing morphology of the upper Columbia River, British Columbia, Canada

The upper Columbia River, British Columbia, Canada, shows typical anastomosing morphology — multiple interconnected channels that enclose floodbasins — and lateral channel stability. We analysed field data on hydraulic and sedimentary processes and show that the anastomosing morphology of the upper Columbia River is caused by sediment (bedload) transport inefficiency, in combination with very limited potential for lateral bank erosion because of very low specific stream power (≤ 2.3 W/m²) and cohesive silty banks. In a diagram of channel type in relation to flow energy and median grain size of the bed material, data points for the straight upper Columbia River channels cluster separately from the data points for braided and meandering channels. Measurements and calculations indicate that bedload transport in the anastomosing reach of the upper Columbia River decreases downstream. Because of lateral channel stability no lateral storage capacity for bedload is created. Therefore, the surplus of bedload leads to channel bed aggradation, which outpaces levee accretion and causes avulsions because of loss of channel flow capacity. This avulsion mechanism applies only to the main channel of the system, which transports 87% of the water and > 90% of the sediment in the cross-valley transect studied. Because of very low sediment transport capacity, the morphological evolution of most secondary channels is slow. Measurements and calculations indicate that much more bedload is sequestered in the relatively steep upper anastomosing reach of the upper Columbia River than in the relatively gentle lower anastomosing reach. With anastomosing morphology and related processes (e.g., crevassing) being best developed in the upper reach, this confirms the notion of upstream rather than downstream control of upper Columbia River anastomosis.