Earthquake-induced crustal gravitational potential energy change in the Philippine area

The crustal gravitational potential energy change (ΔGPE) caused by earthquakes in the Philippine area from January 1976 to November 2011 was estimated in this study. The active convergence between the Philippine Sea Plate and the Sundaland–Eurasian margin is reflected by the greatest gains in GPE along the Philippine, Negros and Cotabato trenches, whereas the Manila Trench is covered by a GPE loss pattern. Although the Philippine Mobile Belt (PMB) itself is actually affected by the ongoing collision and subduction processes, almost the entire Philippine Fault Zone is dominated by GPE loss, revealing a slightly extensional environment along the fault. The time evolution of the cumulated ΔGPE for different segments along the Philippine archipelago shows distinct patterns. Due to the numerous large underthrusting events that have occurred along the Philippine Trench, the cumulated ΔGPE is regularly increasing in its most southern segment. However, in the middle segments, where the Palawan Block enters into collision with the PMB, the increase in cumulated ΔGPE is relatively small. In the most northern segment, where the North Luzon is located, a decrease of cumulated ΔGPE demonstrates that the seismic characteristic of the Manila Trench is dissimilar from other subduction systems in the world. We suggest that the collision of both the Palawan Block and the Benham Rise with the PMB promotes the rotation of the PMB and facilitates the northward escape of the northeastern Luzon, resulting in a decrease of cumulated ΔGPE in the northern Philippines.     

Onland signatures of the Palawan microcontinental block and Philippine mobile belt collision and crustal growth process: A review

The collision of the Palawan microcontinental block with the Philippine mobile belt had significantly influenced the geological evolution of the Philippines. Multiple collisions involving several fragments, through space and time, resulted into the collage of terranes of varying origin exposed in this part of central Philippines. Cusping of the overriding plate, volcanic arc gap, ophiolite emplacement, incipient back-arc rifting, island rotation and tilting, raised coastal terraces, metamorphism, intrusion of igneous rocks and steepened subducted slab as seen in focal mechanism solutions are some of the manifestations of this collision. A late Early Miocene to early Middle Miocene age (20–16 Ma) is proposed for the major collision between the Palawan indenter and the Philippine mobile belt. The collision boundary is located from the northern part of Mindoro through the central mountain range swinging east of Sibuyan Island in the Romblon Island Group and finally threading along the Buruanga Peninsula and eastern side of the Antique Ophiolite Complex before exiting and connecting with the Negros Trench. The collision, through accretion and crustal thickening, has contributed to the crustal growth of the Philippine archipelago.     

Geochemistry of Adakites from the Philippines: Constraints on Their Origins

Abstract. We have identified in the Philippine Archipelago 230 samples of Late Miocene to Quaternary intermediate and evolved magmatic rocks or glasses, the compositions of which plot within the adakitic field defined by Defant and Drum-mond (1990) using Sr/Y ratios versus Y contents. These rocks belong to four different subductions, along the Manila Trench (Batan, Northern Luzon, Central Luzon), the Negros and Sulu Trenches (Negros and Western Mindano), the Cotobato Trench (Southern Mindanao) and the Philippine Trench (Eastern Mindanao). Lavas from Central Mindanao overlie the deep remnants of the Molucca Sea Plate, and were emplaced in a post-collision setting.
All these samples show a significant depletion in Y and HREE with respect to their "normal" calc-alkaline equivalents, suggesting that garnet was either a residual phase during partial melting or a fractionating mineral during differentiation or assimilation coupled with fractional crystallisation (AFC). However, only 19 samples out of our set (i.e., 8 %) display very high Sr/Y ratios (100–250). Our preferred model for the genesis of these "typical adakites" is ca. 20 % partial melting of subducted altered oceanic metabasalts converted to eclogite. This melting process could have been triggered by water from the underlying serpentinites. Most of the samples, termed "intermediate adakites", display major and trace element chemical features intermediate between those of the former group and those of normal calc-alkaline lavas. We show that magma mixing between slab-derived adakitic magmas and mafic mantle-derived melts accounts for most of the trends linking typical and intermediate adakites, although an additional contribution of mantle is required in some cases.     

Seismotectonic Reactions to the Arc-continent Convergence in Central Philippines

Abstract. High seismic activity in the Philippines originates from tectonic convergence related to surface and subsurface seismotectonic features. Based on earthquake data, the archipelago can be divided into the seismically-active Philippine Mobile Belt and the aseismic North Palawan Block. The latter represents a rifted continental fragment of the Eurasian margin that juxtaposed with the rest of island arc units in central Philippines. Earthquake hypocenter plots on planar and in vertical profiles show that the seismic events are associated with known seismotectonic features. In addition, data suggest that the collision zone between the North Palawan Block and the Philippine Mobile Belt is characterized by a decreased amount of hypocenters at > 100 km depths. Although field evidence favors the presence of a subducted slab or slabs beneath western central Philippines, these are difficult to image using the present seismicity distribution dataset.     

Ophiolite complexes as collision zone markers: making the case for the Antique Ophiolite Complex, Panay Island, central Philippines

The collision between the North Palawan Block (NPB) and Philippine Mobile Belt (PMB) has been the subject of studies considering its significance in help-ing define the tectonic evolution of the Philippine is-land arc system. The geology of the western Panay island reveals the presence of a continent-related block (Buruanga Peninsula) juxtaposed to an oceanic frag-ment (Antique Ophiolite Complex). Our recent work in the Buruanga Peninsula helped us define the terrane boundary between the Peninsula and the Antique Ophiolite Complex. However, considering available published data, the Antique Ophiolite Complex has never been considered to be a part of the NPB and to mark the collision zone between Palawan and the PMB.     

北吕宋岛菲律宾活动带蛇绿岩及其上覆浊积岩的放射虫研究新进展

The basement of the Philippine Mobile Belt (PMB) is mainly composed of ophiolites that are mostly overlain by Paleogene to Miocene turbidites in central Luzon. To clarify the geological development of the PMB with respect to the initial stage of the arc volcanism (eg. Yumul et al., 2003, 2008; Dimalanta and Yumul, 2003; Suzuki et al., 2011), radiolarian dating was examined in siliceous sediments associated with the ophiolites and turbidites. The samples were collected from sites identified with the Zambales and Montalban ophiolites, basic tuff phyllites in NW Din-galan, and their overlying formations.     

Middle Eocene low-paleolatitude radiolarian evidence for the Cabog Formation,Central East Luzon,Philippine Mobile Belt

The Cabog Formation, newly established herein and exposed in central East Luzon, Philippine Mobile Belt, is defined in age by the occurrence of radiolarians. The radiolarian assemblage is correlative with the middle Eocene and suggests a low paleolatitude affinity. The correlation, sedimentary environment, and the tectonic significance are discussed. The Cabog Formation is correlative with the distal part of the middle–late Eocene Caraballo Formation, which is exposed in the northeastern side of the Philippine Fault Zone. The sandstone composition and radiolarian age suggest that the Cabog Formation represents the first depositional stage in the early arc setting. The northward migration of the formation is also estimated in relation with the Philippine Sea Plate motion along the Older Philippine Fault from the equatorial area.     

Multistage Deformation in the Northeastern Segment of the Jiangshao Fault (Suture) Belt: Constraints for the Relationship between the Yangtze Plate and the Cathaysia Old Land

Multistage deformation events have occurred in the northeastern Jiangshao Fault (Suture) Belt. The earliest two are ductile deformation events. The first is the ca. 820 Ma top-to-the-northwest ductile thrusting, which directly resulted from the collision between the Cathaysia Old Land and the Chencai Arc (?) during the Late Neoproterozoic, and the Jiangnan Orogenic Belt that formed as the ocean closed between the Yangtze Plate and the jointed Cathaysia Old Land and the Chencai Arc due to continuous compression. The second is the ductile left-lateral strike-slipping that occurred in the latest Early Paleozoic. Since the Jinning period, all deformation events represent the reactivation or inversion of intraplate structures due to the collisions between the North China and Yangtze plates during the Triassic and between the Philippine Sea and Eurasian plates during the Cenozoic. In the Triassic, brittle right-lateral strike-slipping and subsequent top-to-the south thrusting occurred along the whole northeastern Jiangshao Fault Zone because of the collision between the North China and Yangtze plates. In the Late Mesozoic, regional extension took place across southeastern China. In the Cenozoic, the collision between the Philippine Sea and Eurasian plates resulted in brittle thrusts along the whole Jiangnan Old land in the Miocene. The Jiangshao Fault Belt is a weak zone in the crust with long history, and its reactivation is one of important characteristics of the deformation in South China; however, late-stage deformation events did not occur beyond the Jiangnan Old Land and most of them are parallel to the strike of the Old Land, which is similar to the Cenozoic deformation in Central Asia. In addition, the Jiangnan old Land is not a collisional boundary between the Yangtze Plate and Cathaysia Old Land in the Triassic.     

Present-day crustal deformation along the Philippine Fault in Luzon,Philippines

The Philippine Fault results from the oblique convergence between the Philippine Sea Plate and the Sunda Block/Eurasian Plate. The fault exhibits left-lateral slip and transects the Philippine archipelago from the northwest corner of Luzon to the southeast end of Mindanao for about 1200 km. To better understand fault slip behavior along the Philippine Fault, eight GPS surveys were conducted from 1996 to 2008 in the Luzon region. We combine the 12-yr survey-mode GPS data in the Luzon region and continuous GPS data in Taiwan, along with additional 15 International GNSS Service sites in the Asia-Pacific region, and use the GAMIT/GLOBK software to calculate site coordinates. We then estimate the site velocity from position time series by linear regression. Our results show that the horizontal velocities with respect to the Sunda Block gradually decrease from north to south along the western Luzon at rates of 85–49 mm/yr in the west–northwest direction. This feature also implies a southward decrease of convergence rate along the Manila Trench. Significant internal deformation is observed near the Philippine Fault. Using a two dimensional elastic dislocation model and GPS velocities, we invert for fault geometries and back-slip rates of the Philippine Fault. The results indicate that the back-slip rates on the Philippine Fault increase from north to south, with the rates of 22, 37 and 40 mm/yr, respectively, on the northern, central, and southern segments. The inferred long-term fault slip rates of 24–40 mm/yr are very close to back-slip rates on locked fault segments, suggesting the Philippine Fault is fully locked. The stress tensor inversions from earthquake focal mechanisms indicate a transpressional regime in the Luzon area. Directions of σ₁ axes and maximum horizontal compressive axes are between 90° and 110°, consistent with major tectonic features in the Philippines. The high angle between σ₁ axes and the Philippine Fault in central Luzon suggests a weak fault zone possibly associated with fluid pressure.     

Geological Consequences of the Accretion of Benham Rise to Northern Luzon, Philippines

Benham Rise is a large igneous province that has been accreted to the eastern seaboard of northern Lu-zon since Early Miocene. It started forming during the Eocene at a hotspot/mantle plume in the vicinity of the Central basin Spreading Center in the West Philippine Basin (CBSC) of the Philippine Sea Plate. Seafloor spreading from the CBSC and Parece Vela pushed Benham Rise towards Luzon. Eventually Benham Rise jammed against Luzon at the end of the Oligocene, with consequences that impacted on the geology of the Philippines which have been similarly noted in colli-sions of large igneous provinces in other areas. These are manifested as follows:     

Sedimentary filling characteristics of the South China Sea oceanic basin,with links to tectonic activity during and after seafloor spreading

ABSTRACT

Based on approximately 11,000 km of seismic reflection data collected across the South China Sea oceanic basin, we describe the sedimentary filling characteristics of the basin since its Oligocene opening, as well as connections between this history and contemporaneous regional tectonic events. The seismic lines are spaced ~50 km apart, and the data are tied to International Ocean Discovery Program (IODP) Expedition 349 drilling data. Basin filling occurred in three phases, with basin-wide mean sedimentation rates increasing through time. During the Oligocene to middle Miocene, sediments accumulated primarily in the northern East and Northwest Sub-basins, with a mean basin-wide sedimentation rate of 8 m/m.y. The presence of these deposits over deep basement floor indicates that seafloor spreading initiated in these northern regions. During the late Miocene, deposition occurred primarily in the Northwest Sub-basin and partly in the southern East Sub-basin, with a mean basin-wide sedimentation rate of 30 m/m.y. Basin filling during this time seems to have been linked to slip reversal of the Red River Fault and collision of the North Palawan Block with the Luzon Arc. During the Pliocene and Pleistocene, sediments accumulated rapidly in the northeastern and southern East Sub-basin and the Southwest Sub-basin. The mean basin-wide sedimentation rate was 70 m/m.y. Basin filling during this phase seems to have been associated with the Taiwan and North Palawan collisions, SCS subduction along the Manila Trench, and Tibetan Plateau uplift. Gravity flow deposits predominate throughout the basin fill.     

Collision of the IZU arc with Honshu and the effects of oblique subduction in the Miura-Boso peninsulas

Collision of the Izu arc in Central Japan is discussed with a focus on its tectonic effects to the east of the arc, in the Miura-Boso Peninsulas of Honshu. The tectonics are the combination of the following events: Philippine Sea plate spreading in the Late Oligocene to Early Miocene; opening of the Sea of Japan in the middle Miocene; obduction of ophiolitic rocks in the northeasternmost corner of the Philippine Sea plate, and forearc sedimentation between the Honshu and Izu arcs. Oblique subduction has shifted the plate boundary from northeast to southwest, from the present Mineoka Tectonic Belt through the Miura Fold Belt to the Sagami trough since the Miocene. Remarkable right-lateral transpressional deformation occurred throughout this period of the oblique collision and subduction.     

Sculpting the Philippine archipelago since the Cretaceous through rifting,oceanic spreading,subduction, obduction,collision and strike-slip faulting: Contribution to IGMA5000

The Philippine archipelago resulted from a complex series of geologic events that involved continental rifting, oceanic spreading, subduction, ophiolite obduction, arc-continent collision, intra-arc basin formation and strike-slip faulting. It can be divided into two tectono-stratigraphic blocks, namely; the Palawan–Mindoro Continental Block (PCB) and the Philippine Mobile Belt (PMB). The PCB was originally a part of the Asian mainland that was rifted away during the Mesozoic and drifted in the course of the opening of the South China Sea (SCS) during Late Paleogene. On the other hand, the PMB developed mainly from island arcs and ophiolite terranes that started to form during the Cretaceous. At present, the PMB collides with the PCB in the Visayas in the central-western Philippines. This paper discusses recent updates on Philippine geology and tectonics as contribution to the establishment of the International Geologic Map of Asia at 1:5 M scale (IGMA5000).     

Temporal Geochemical Evolution of Neogene Magmatism in the Baguio Gold–Copper Mining District (Northern Luzon, Philippines)

Baguio, in the Central Cordillera of Northern Luzon, is a district that displays porphyry copper and epithermal gold mineralization, associated with Early Miocene–Pliocene–Quaternary calc‐alkaline and adakitic intrusions. Systematic sampling, K‐Ar dating, major and trace elements, and Sr, Nd, Pb isotopic analyses of fresh magmatic rocks indicate three magmatic pulses: an Early Miocene phase (21.2–18.7 Ma), a Middle–Late Miocene phase (15.3–8 Ma) and finally a Pliocene–Quaternary event (3–1 Ma). The first phase emplaced evolved calc‐alkaline magmas, essentially within the Agno Batholith complex, and is thought to be related to the westward‐dipping subduction of the West Philippine Basin. After a quiescence period during which the Kennon limestone was deposited, magmatic activity resumed at 15.3 Ma, in connection with the start of the subduction of the South China Sea along the Manila Trench. It emplaced first petrogenetically related and relatively unradiogenic low‐K calc‐alkaline lavas and intermediate adakites. Temporal geochemical patterns observed from 15.3 to 1 Ma include progressive enrichment in K and other large ion lithophile elements, increase in radiogenic Sr and Pb and corresponding decrease in radiogenic Nd. These features are thought to reflect the progressive addition to the Luzon arc mantle wedge of incompatible elements largely inherited from South China Sea sediments. The origin of the long quiescence period, from 8 to 3 Ma, remains problematic. It might represent a local consequence of the docking of the Zambales ophiolitic terrane to Northern Luzon. Then, magmatic activity resumed at 3 Ma, emplacing chemically diversified rocks ranging from low K to high K and including a large proportion of adakites, especially during the Quaternary (dacitic plugs). The authors tentatively relate this diversity to the development of a slab tear linked with the subduction of the fossil South China Sea ridge beneath the Baguio area.     

Middle miocene deduction and late miocene beginning of collision registered in the hengchun peninsula: Geodynamic implications for the evolution of Taiwan

Taiwan is located in the axis of the Manila Trench. It results from an oblique collision between the northernmost part of the Luzon arc and the Chinese passive margin. This active collision follows the subduction of the Oligocene-Miocene oceanic crust of the South China Sea along the Manila Trench. The tectonized Chinese margin emerged in the Hengchun peninsula (South Taiwan). Gentle folds which are delineated by the Quaternary reefal limestones demonstrate Recent deformations. These folds deformed a thick detrital sequence of Miocene age (Ssuchung Chi series) which was previously strongly folded and thrust westward (axis NS-N20) upon the Renting mélange of Latest Miocene age. These main deformations, sealed by the Middle Pliocene, are the evidence for the onset of collision in this part of Taiwan at the end of the Miocene. Because of its obliquity, the collision started already in the northern part of Taiwan during the Late Miocene (6-7-8 Ma ?).The Ssuchung Chi series, a sequence of proximal turbidites, has contained, since the Middle Miocene (NN 6~13 Ma), fragments of an Oligocene to Lower Miocene oceanic crust. This ophiolitic material is very similar to the East Taiwan Ophiolite of the Coastal Range. It originated most probably from a slice of South China Sea crust obducted in Middle Miocene times (13–14 Ma) upon the Chinese margin (North of the Hengchun peninsula). This obduction occurred 7 to 8 Ma before the beginning of collision. These results make it possible to propose an evolutionary model for Taiwan from the Oligocene to the Recent, with the different phases of a collision between a volcanic arc and a passive margin.     

Analysis of crustal deformation in Luzon, Philippines using geodetic observations and earthquake focal mechanisms

We utilize regional GPS velocities from Luzon, Philippines, with focal mechanism data from the Harvard Centroid Moment Tensor (CMT) Catalog, to constrain tectonic deformation in the complex plate boundary zone between the Philippine Sea Plate and Eurasia (the Sundaland block). Processed satellite imagery and digital elevation models are used with existing gravity anomaly, seismicity, and geologic maps to define a suite of six elastic blocks. Geodetic and focal mechanism data are inverted simultaneously to estimate plate rotations and fault-locking parameters for each of the tectonic blocks and faults comprising Luzon. Major tectonic structures that were found to absorb the plate convergence include the Manila Trench (20–100 mm yr^− 1) and East Luzon Trough ( 9–15 mm yr^− 1)/Philippine Trench ( 29–34 mm yr^− 1), which accommodate eastward and westward subduction beneath Luzon, respectively; the left-lateral strike-slip Philippine Fault ( 20–40 mm yr^− 1), and its northward extensions, the Northern Cordillera Fault ( 17–37 mm yr^− 1 transtension), and the Digdig Fault ( 17–27 mm yr^− 1 transpression). The Macolod Corridor, a zone of active volcanism, crustal thinning, extension, and extensive normal and strike-slip faulting in southwestern Luzon, is associated with left-lateral, transtensional slip of  5–10 mm yr^− 1. The Marikina Fault, which separates the Central Luzon block from the Southwestern Luzon block, reveals  10–12 mm yr^− 1 of left-lateral transpression. Our analysis suggests that much of the Philippine Fault and associated splays are locked to partly coupled, while the Manila and Philippine trenches appear to be poorly coupled. Luzon is best characterized as a tectonically active plate boundary zone, comprising six mobile elastic tectonic blocks between two active subduction zones. The Philippine Fault and associated intra-arc faults accommodate much of the trench-parallel component of relative plate motion.     

Plate boundary evolution in the Halmahera region,Indonesia

Halmahera is situated in eastern Indonesia at the southwest corner of the Philippine Sea Plate. Active arc-arc collision is in process in the Molucca Sea to the west of Halmahera. New stratigraphic observations from Halmahera link this island and the east Philippines and record the history of subduction of the Molucca Sea lithosphere. The Halmahera Basement Complex and the basement of east Mindanao were part of an arc and forearc of Late Cretaceous-Early Tertiary age and have formed part of a single plate since the Late Eocene-Early Oligocene. There is no evidence that Halmahera formed part of an Oligo-Miocene arc but arc volcanism, associated with eastwards subduction of the Molucca Sea beneath Halmahera, began in the Pliocene and the Pliocene arc is built on a basement of the early Tertiary arc. Arc volcanism ceased briefly during the Pleistocene and the arc shifted westwards after an episode of deformation. The present active arc is built upon deformed rocks of the Pliocene arc. The combination of new stratigraphic information from the Halmahera islands and models of the present-day tectonic structure of the region deduced from seismic and other geophysical studies is used to constrain the tectonic evolution of the region since the Miocene. Diachronous collision at the western edge of the Philippine Sea Plate which began in Mindanao in the Late Miocene impeded the movement of the Philippine Sea Plate and further motion has been achieved by a combination of strike-slip motion along the Philippine Fault, subduction at the Philippine Trench and subduction of the Molucca Sea lithosphere beneath Halmahera.     

How was Taiwan created?

Since the beginning of formation of proto-Taiwan during late Miocene (9 Ma), the subducting Philippine (PH) Sea plate moved continuously through time in the N307° direction at a 5.6 cm/year velocity with respect to Eurasia (EU), tearing the Eurasian plate. Strain states within the EU crust are different on each side of the western PH Sea plate boundary (extensional in the Okinawa Trough and northeastern Taiwan versus contractional for the rest of Taiwan Island). The B feature corresponds to the boundary between the continental and oceanic parts of the subducting Eurasian plate and lies in the prolongation of the ocean–continent boundary of the northern South China Sea. Strain rates in the Philippines to northern Taiwan accretionary prism are similar on each side of B (contractional), though with different strain directions, perhaps in relation with the change of nature of the EU slab across B. Consequently, in the process of Taiwan mountain building, the deformation style was probably not changing continuously from the Manila to the Ryukyu subduction zones. The Luzon intra-oceanic arc only formed south of B, above the subducting Eurasian oceanic lithosphere. North of B, the Luzon arc collided with EU simultaneously with the eastward subduction of a portion of EU continental lithosphere beneath the Luzon arc. In its northern portion, the lower part of the Luzon arc was subducting beneath Eurasia while the upper part accreted against the Ryukyu forearc. Among the consequences of such a simple geodynamic model: (i) The notion of continuum from subduction to collision might be questioned. (ii) Traces of the Miocene volcanic arc were never found in the southwestern Ryukyu arc. We suggest that the portion of EU continental lithosphere, which has subducted beneath the Coastal Range, might include the Miocene Ryukyu arc volcanoes formed west of 126°E longitude and which are missing today. (iii) The 150-km-wide oceanic domain located south of B between the Luzon arc and the Manila trench, above the subducting oceanic EU plate (South China Sea) was progressively incorporated into the EU plate north of B.     

Migration of the lower North Palawan submarine canyon: characteristics and controls

ABSTRACT

The North Palawan Canyon is a large, previously undescribed submarine canyon that incises the continental shelf and slope of the southern South China Sea. Using multibeam bathymetric data and two-dimensional seismic reflection data, we have characterized current canyon morphology and documented lower-canyon migration in cross-section since the middle Miocene. We have also explored possible causes for the ancient migrations. The 175 km modern canyon is flanked by sediment waves outside its northern bank, and depositional lobes fan out from the canyon mouth. Over the past 15 million years, at least 20 cycles of significant canyon incising and infilling have occurred, along with significant canyon migration. This migration, as recorded in the sedimentary (seismic) record near a leftward bend in the canyon’s lower reach, can be divided into three stages: southward migration during the middle Miocene (averaging 1.24 km/m.y.), northward migration during the late Miocene (1.34 km/m.y.), and stationarity since the Pliocene. The overall zigzagging pattern of the canyon thalweg (as seen in cross-section through time) results from lateral and downstream migration in an aggradational environment. The early (middle to late Miocene) rapid zigzagging migration of the lower main channel, first southward and then northward, was probably associated with the strong collision of the North Palawan Block with the Philippine Mobile Belt, which would have triggered submarine instabilities and deformed the seafloor. The more recent (Pliocene and later) slowing or cessation of canyon migration is likely the result of the now quieter tectonic setting and long-term climatic cooling and drying.     

黄岩海山链俯冲与吕宋岛斑岩铜金成矿

菲律宾吕宋岛上约5Ma以来的斑岩铜金矿床主要集中在北部的Baguio和Mankayan地区,它们在时空上与黄岩海山链密切相关。1907~2013年间的地震数据表明,在吕宋岛中部(16°N)附近存在地震稀疏带。吕宋岛上的斑岩铜金矿床分布在该地震稀疏带的两侧。收集到的相应时期埃达克岩的Sr/Y-(La/Yb)N、Sr/Y-Y和La/Yb-Yb图解表明,这些埃达克岩几乎都是洋壳部分熔融形成的。与吕宋岛北部侵入型埃达克岩相比,位于16°N附近的埃达克岩具有更高的Sr含量,这可能与南海古扩张脊俯冲撕裂形成的板片窗有关。斜长石是辉长岩的主要矿物之一,因此,撕裂的洋壳边缘的辉长岩层部分熔融,形成具有更高Sr含量的埃达克质岩浆。而位于吕宋岛南部Bataan弧中的埃达克质火山岩,可能是在南海古扩张脊俯冲之前形成的。根据已发表的斑岩铜金矿床数据,Mankayan地区的成矿年龄在约3.5~1.4Ma,Baguio地区的成矿年龄在约3.1~0.5Ma之间,有从北向南变年轻的趋势,这与黄岩海山链沿马尼拉海沟向南迁移一致。此外,吕宋岛北部Mt.Cagua到Baguio之间存在一个延伸了220km的第四纪火山活动的空隙,该区域大部分火山已经在中新世停止活动。这可能是黄岩海山链的俯冲使得俯冲倾角逐渐变缓、挤压加强而导致的。同时期的斑岩铜矿床正好分布在这一火山空隙中,是俯冲洋壳部分熔融的产物。