Re–Os and U–Pb geochronology of the Duobaoshan porphyry Cu–Mo–(Au) deposit,northeast China,and its geological significance

The large-scale Duobaoshan porphyry Cu–Mo–(Au) deposit is located at the north segment of the Da Hinggan Mountains, northeast China. Six molybdenite samples from the Duobaoshan deposit were selected for Re–Os isotope measurement to define the mineralization age of the deposit, yieldings a Re–Os isochron age of 475.9 ± 7.9 Ma (2σ), which is accordant with the Re–Os model ages of 476.6 ± 6.9–480.2 ± 6.9 Ma. This age is consistent with the age of the related granodiorite porphyry, which was dated as 477.2 ± 4 Ma by zircon U–Pb analysis using LA-ICP-MS. These ages disagree with the previous K–Ar age determinations that suggest a correlation of intrusive rocks of the Duobaoshan area with the Hercynian intrusive rocks of Carboniferous–Permian age. These ages demonstrate that the Duobaoshan granodiorite porphyry and related Cu–Mo deposit occurred in the Early Ordovician. The rhenium content of molybdenite varies from 290.9 to 728.2 μg/g, with an average content of 634.8 μg/g. The high rhenium content in molybdenite of the Duobaoshan deposit suggests that the ore-forming materials may be mainly of mantle source.     

Geochronology,geochemistry and Sr–Nd–Hf isotopes of the Haisugou porphyry Mo deposit,northeast China,and their geological significance

The Haisugou Mo deposit is located in the northern part of the Xilamulun Mo–Cu metallogenic belt in northeastern China. The Mo mineralization mainly occurs as quartz-molybdenite veins within the Haisugou granite, which was emplaced into rocks of the Early Permian Qingfengshan Formation. Zircon U–Pb dating by LA–ICP-MS of the granite yields a crystallization age of 137.6 ± 0.9 Ma, suggesting emplacement during the peak time of Mo mineralization in eastern China, broadly constrained to ca. 150–130 Ma, when tectonic stresses shifted from compression to extension. Whole-rock geochemical data suggest that the granite belongs to the high-K calc-alkaline series, and is characterized by relatively high LREE; low HREE; depletion of Ti, Ba, and Nb; and a moderate negative Eu anomaly. The zircon ε_Hf(t) and whole-rock ε_Nd(t) values for the intrusion range from +4.5 to +10.0 and +0.2 to +1.6, respectively, indicating that the magma originated from the juvenile lower crust source derived from depleted mantle, with some component of ancient continental crust. The granite is also characterized by initial (⁸⁷Sr/⁸⁶Sr)_i ratios ranging from 0.7040 to 0.7074, which suggest some contamination by the upper crust during the ascent of the primitive magma. Moreover, it can be recognized from the whole-rock major and trace element data that significant fractional crystallization occurred during magmatic evolution, with the separation of plagioclase and K-feldspar. Because Mo is an incompatible element and tends to concentrate in the melt during crystallization, fractionation processes likely played an important role in the formation of the Haisugou Mo deposit.     

Origin of the Tongshankou porphyry–skarn Cu–Mo deposit,eastern Yangtze craton,Eastern China: geochronological,geochemical, and Sr–Nd–Hf isotopic constraints

The Tongshankou Cu–Mo deposit, located in the westernmost Daye district of the Late Mesozoic Metallogenic Belt along the Middle-Lower reaches of the Yangtze River, eastern China, consists mainly of porphyry and skarn ores hosted in the Tongshankou granodiorite and along the contact with the Lower Triassic marine carbonates, respectively. Sensitive high-resolution ion microprobe zircon U–Pb dating constrains the crystallization of the granodiorite at 140.6 ± 2.4 Ma (1σ). Six molybdenite samples from the porphyry ores yield Re–Os isochron age of 143.8 ± 2.6 Ma (2σ), while a phlogopite sample from the skarn ores yields an ⁴⁰Ar/³⁹Ar plateau age of 143.0 ± 0.3 Ma and an isochron age of 143.8 ± 0.8 Ma (2σ), indicating an earliest Cretaceous mineralization event. The Tongshankou granodiorite has geochemical features resembling slab-derived adakites, such as high Sr (740–1,300 ppm) and enrichment in light rare earth elements (REE), low Sc (<10 ppm), Y (<13.3 ppm), and depletion in heavy REE (<1.2 ppm Yb), and resultant high Sr/Y (60–92) and La/Yb (26–75) ratios. However, they differ from typical subduction-related adakites by high K, low MgO and Mg#, and radiogenic Sr–Nd–Hf isotopic compositions, with (⁸⁷Sr/⁸⁶Sr) _t  = 0.7062–0.7067, ɛ _Nd(t) = −4.37 to −4.63, (¹⁷⁶Hf/¹⁷⁷Hf) _t  = 0.282469–0.282590, and ɛ _Hf(t) = −3.3 to −7.6. The geochemical and isotopic data, coupled with geological analysis, indicate that the Tongshankou granodiorite was most likely generated by partial melting of enriched lithospheric mantle that was previously metasomitized by slab melts related to an ancient subduction system. Magmas derived from such a source could have acquired a high oxidation state, as indicated by the assemblage of quartz–magnetite–titanite–amphibole–Mg-rich biotite in the Tongshankou granodiorite and the compositions of magmatic biotite that fall in the field between the NiNiO and magnetite–hematite buffers in the Fe³⁺–Fe²⁺–Mg diagram. Sulfur would have been present as sulfates in such highly oxidized magmas, so that chalcophile elements Cu and Mo were retained as incompatible elements in the melt, contributing to subsequent mineralization. A compilation of existing data reveals that porphyry and porphyry-related Cu–Fe–Au–Mo mineralization from Daye and other districts of the Metallogenic Belt along the Middle-Lower reaches of the Yangtze River took place coevally in the Early Cretaceous and was related to an intracontinental extensional environment, distinctly different from the arc-compressive setting of the Cenozoic age that has been responsible for the emplacement of most porphyry Cu deposits of the Pacific Rim.     

Geology,fluid inclusion and isotope constraints on ore genesis of the post-collisional Dabu porphyry Cu–Mo deposit,southern Tibet

The Dabu Cu-Mo porphyry deposit is situated in the southern part of the Lhasa terrane within the post-collisional Gangdese porphyry copper belt (GPCB). It is one of several deposits that include the Qulong and Zhunuo porphyry deposits. The processes responsible for ore formation in the Dabu deposit can be divided into three stages of veining: stage I, quartz–K-feldspar (biotite) ± chalcopyrite ± pyrite, stage II, quartz–molybdenite ± pyrite ± chalcopyrite, and stage III, quartz–pyrite ± molybdenite. Three types of fluid inclusions (FIs) are present: liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), and solid bearing multi-phase (S-type) inclusions. The homogenization temperatures for the FIs from stages I to III are in the ranges of 272–475 °C, 244–486 °C, and 299–399 °C, and their salinities vary from 2.1 to 49.1, 1.1 to 55.8, and 2.9 to 18.0 wt% NaCl equiv., respectively. The coexistence of S-type, V-type and L-type FIs in quartz of stage I and II with similar homogenization temperatures but contrasting salinities, indicate that fluid boiling is the major factor controlling metal precipitation in the Dabu deposit. The ore-forming fluids of this deposit are characterized by high temperature and high salinity, and they belong to a H₂O–NaCl magmatic–hydrothermal system. The H–O–S–Pb isotopic compositions indicate that the ore metals and fluids came primarily from a magmatic source linked to Miocene intrusions characterized by high Sr/Y ratios, similar to other porphyry deposits in the GPCB. The fluids forming the Dabu deposit were rich in Na and Cl, derived from metamorphic dehydration of subducted oceanic slab through which NaCl-brine or seawater had percolated. The inheritance of ancient subduction-associated arc chemistry, without shallow level crustal assimilation and/or input of the meteoric water, was responsible for the generation of fertile magma, as well as CO₂-poor and halite-bearing FIs associated with post-collisional porphyry deposits. The estimated mineralization depths of Qulong, Dabu and Zhunuo deposits are 1.6–4.3 km, 0.5–3.4 km and 0.2–3.0 km, respectively, displaying a gradual decrease from eastern to western Gangdese. Deep ore-forming processes accounted for the generation of giant-sized Qulong deposit, because the exsolution of aqueous fluids with large fraction of water and chlorine in deep or high pressure systems can extract more copper from melts than those formed in shallow systems. However, the formation of small-sized Dabu deposit can be explained by a single magmatic event without additional replenishment of S, metal, or thermal energy. In addition, the ore-forming conditions of porphyry Cu–Mo deposits in GPCB are comparable to those of porphyry Cu ± Au ± Mo deposits formed in oceanic subduction-related continental or island arcs, but differ from those of porphyry Mo deposit formed in the Dabie-Qinling collisional orogens. The depth of formation of the mineralization and features of primary magma source are two major controls on the metal types and ore-fluid compositions of these porphyry deposits.     

Geochronology and geochemistry of the Wunugetushan porphyry Cu–Mo deposit in NE china,and their geological significance

The Wunugetushan porphyry Cu–Mo deposit is located in the Manzhouli district of NE China, on the southern margin of the Mesozoic Mongol–Okhotsk Orogenic Belt. Concentric rings of hydrothermal alteration and Cu–Mo mineralization surround an Early–Middle Jurassic monzogranitic porphyry. The Cu–Mo mineralization is clearly related to the quartz–potassic and quartz–sericite alteration. Molybdenite Re–Os and groundmass ⁴⁰Ar/³⁹Ar of the host porphyry dates indicate that the ore-formation and porphyry-emplacement occurred at 177.6 ± 4.5 Ma and 179.0 ± 1.9 Ma, respectively. Geochemically, the host porphyry of the deposit is characterized by strong LREE/HREE fractionation, enrichment in LILE, Ba, Rb, U, Th and Pb, and depletion of HFSE, Nb, Ta, Ti and HREE. The Sr–Nd–Pb isotopic compositions of the porphyry display an varied initial (⁸⁷Sr/⁸⁶Sr)_i ratio, a positive ε_Nd(t) values and high ²⁰⁶Pb/²⁰⁴Pb_t, ²⁰⁷Pb/²⁰⁴Pb_t and ²⁰⁸Pb/²⁰⁴Pb_t ratios. These data indicate that the magmatic source of the host porphyry comprised two end-members: lithospheric mantle metasomatized by fluids derived from the subducted slab; and continental crust. We infer that the primitive magma of the host porphyry was derived from crust–mantle transition zone. Based on regional geology and geochemistry of the host porphyry, the Wunugetushan deposit is suggested to form in a continental collision environment after closure of the Mongol–Okhotsk Ocean.     

Structural,lithological, and geochemical constraints on the dynamic magma plumbing system of the Jinchuan Ni–Cu sulfide deposit,NW China

Eastern and western portions of the Jinchuan ultramafic intrusion have previously been interpreted as dismembered segments of a single elongate intrusion by late faults. However, the different stratigraphic sequences of the two portions indicate that they are originally two separate intrusions, referred to as Eastern and Western intrusions in this study. The Eastern intrusion is characterized by a concentric distribution of rock types with a core of sulfide dunite enveloped by lherzolite, whereas the Western intrusion is composed of the Upper and Lower units, interpreted as magmatic mega cycles with regular variations in lithology and chemistry. In the Western intrusion, the Upper unit consists of fine-grained dunite, lherzolite, and pyroxenite from its base to its top. The MgO contents decrease upward from the dunites (42–45 wt.%) to the lherzolites (36–41 wt.%), while Al₂O₃ and incompatible elements increase upward. In contrast, the Lower unit consists of coarse-grained dunites and lherzolites containing 37–40 and 28–35 wt.% MgO, respectively. Sharp contacts between the Upper and Lower units and fine-grained dunite xenoliths at the top of the Lower unit indicate that the Lower unit intruded along the base of the Upper unit. Disseminated and net-textured sulfides primarily occur in the Lower unit and comprise the no. 24 ore body. Very low S contents (<100 ppm) of the wall rocks at Jinchuan indicate that they were not the source of S causing sulfide immiscibility. Sulfide segregation more likely occurred in deep-seated magma chambers, and sulfides were deposited in the Western intrusion when sulfide-bearing magmas passed through the intrusion. In contrast, the Eastern intrusion was formed by injections of sulfide-free and sulfide-bearing olivine-crystal mushes, respectively, from another deep-seated staging magma chamber. The Eastern and Western intrusions and the deep-seated magma chambers comprise a complicated magma plumbing system at Jinchuan. Normal faults played a significant role in the formation of the magma plumbing system and provided pathways for the magmas.     

Geochronologic and isotope geochemical constraints on magmatism and associated W–Mo mineralization of the Jitoushan W–Mo deposit,middle–lower Yangtze Valley

The Jitoushan W–Mo ore body is a typical skarn-type deposit with the potential for porphyry Mo mineralization at depth. As it is newly discovered, only a few studies have been conducted on the geochronology and ore genesis of this deposit. The ore district consists of Cambrian to Silurian sedimentary and low-grade metasedimentary strata, intruded by granodiorite, diorite porphyry, granite porphyry, and quartz porphyry. Skarn W–Mo ore bodies are hosted in the contact zone between the granodiorite and Cambrian limestone strata. Within the granodiorite near the contact zone, quartz vein type and disseminated sulphide mineralization are well developed. The Mo-bearing granite porphyry has been traced at depth by drilling. Our results reveal two discrete magmatic events at ca. 138 and ca. 127 Ma in the study area. The molybdenite Re–Os isochronal age of 136.6 ± 1.5 million years is consistent with the first magmatic event. The zircon Hf isotope (?_Hf(t) =??12.55?3.91), sulphide isotopes (δ³⁴S = 3.32–5.59‰), and Re content of molybdenite (Re_content = 6.424–19.07 μg) indicate that the ore-forming materials were mainly derived from the deep crust. The regional tectonic system switched from a Late Jurassic transpressive regime to an earliest Cretaceous extensional regime at ca. 145 Ma, and at ca. 138 Ma, the Jitoushan W–Mo deposit formed in an extensional setting.     

U–Pb zircon,geochemical and Sr–Nd–Hf isotopic constraints on age and origin of the intrusions from Wunugetushan porphyry deposit,Northeast China: implication for Triassic–Jurassic Cu–Mo mineralization in Mongolia–Erguna metallogenic belt

The Wunugetushan porphyry Cu–Mo deposit is located in northeastern China. The deposit lies within the Mongolia–Erguna metallogenic belt, which is associated with the evolution of the Mongol–Okhotsk Ocean. The multiple episodes of magmatism in the ore district, occurred from 206 to 173 Ma, can be divided into pre-mineralization stage (biotite granite), mineralization stage (monzogranitic porphyry and rhyolitic porphyry), and post-mineralization stage (andesitic porphyry). The biotite granite has (⁸⁷Sr/⁸⁶Sr)_i values of 0.704105–0.704706, ε_Nd(t) values of ?0.67 to ?0.07, and ε_Hf(t) values of ?0.4 to 2.8, yielding Hf two-stage model ages (T_DM2) 1250–1067 Ma, and Nd model ages of 1.04–0.96 Ga, indicating that the pre-mineralization magmas were generated by the remelting of Neoproterozoic juvenile crustal material. The monzogranitic porphyry has (⁸⁷Sr/⁸⁶Sr)_i values of 0.704707–0.706134, ε_Nd(t) values of 0.29–1.33, and ε_Hf(t) values of 1.0–2.9, yielding T_DM2 model ages of 1173–1047 Ma. The rhyolitic porphyry has (⁸⁷Sr/⁸⁶Sr)_i ratio of 0.702129, ε_Nd(t) value of ?0.21, and ε_Hf(t) values of ?0.5 to 7.1, T_DM2 model ages from 1269 to 782 Ma. These results show that the magmas of mineralization stage were generated by the partial melting of juvenile crust mixed with mantle-derived components. The andesitic porphyry has (⁸⁷Sr/⁸⁶Sr)_i ratio of 0.705284, ε_Nd(t) value of 0.82, and ε_Hf(t) values from 4.1 to 7.4, indicating that the post-mineralization magma source contained more mantle-derived material. The Mesozoic Cu–Mo deposits which genetically related to Mongol–Okhotsk Ocean were temporally distributed in Middle to Late Triassic (240–230 Ma), Early Jurassic (200–180 Ma), and Later Jurassic (160–150 Ma) period. The Middle Triassic to Early Jurassic Cu–Mo mineralization was dominated by Mongol–Okhotsk oceanic plate southeast-directed subducted beneath the Erguna massif. The Later Jurassic Cu–Mo mineralization was controlled by the continent–continent collision between Siberia plate and Erguna massif.     

Platinum-group elements in ores from the Kalmakyr porphyry Cu–Au–Mo deposit, Uzbekistan: bulk geochemical and laser ablation ICP-MS data

We studied primary ore samples from Kalmakyr, a giant Cu–Au–Mo porphyry deposit in eastern Uzbekistan. Disseminated and stockwork-type high-grade Cu–Au–Mo mineralization showed average concentrations of 55 ppb Pd, 5.5 ppb Pt, 0.95 ppb Rh, 0.49 ppb Ir, and 4.1 ppm Au (n = 8). This type of mineralization is characterized by the presence of pyrite, chalcopyrite, molybdenite, and gold. A peak Pd content of 292 ppb was determined in a base-metal-rich quartz vein in granodiorite porphyry, which contains galena, sphalerite, chalcopyrite, tetrahedrite, and gold. Palladium correlates with Cu, Ag, Se, and S. Mineralogical and laser ablation ICP-MS study confirmed that Pd is homogeneously distributed in chalcopyrite, which contains up to 110 ppm Pd, and tetrahedrite, containing up to 20 ppm Pd. An assessment of the Pd and Pt budget at Kalmakyr showed the potential of approximately 17 t of Pd and 1.7 t of Pt.     

Geochronology and geochemistry of late Jurassic adakitic intrusions and associated porphyry Mo–Cu deposit in the Tongcun area,east China: Implications for metallogenesis and tectonic setting

The genesis of adakites and associated Mo–Cu mineralization in non–arc settings in China is poorly constrained. Here, we present geochronology, geochemistry and Sr–Nd–Pb isotopes for the Tongcun intrusive complex, and report Pb isotopes and ⁴⁰Ar–³⁹Ar age for the Tongcun Mo–Cu deposit. The Tongcun intrusive complex is composed mainly by granodiorite and monzogranite (phase 1 and phase 2), with emplacement age of 160 Ma to 148 Ma. The Tongcun complex can be classified as typical high–K calc–alkaline I–type granitoid and also shows adakitic geochemical features. Moreover, the negative Nb, Ta, Ti, and P anomalies and enriched initial ⁸⁷Sr/⁸⁶Sr ratios of 0.7083–0.7092 of the Tongcun intrusive complex are consistent with those of the subduction–related magmatism. The ⁴⁰Ar–³⁹Ar dating of sericite, which is intergrown with chalcopyrite, indicates that the late Cu mineralization event occurred at ~ 155.5 Ma. The early Mo (Cu) and the late Cu mineralization events in this deposit were temporally, spatially and genetically associated with the emplacement of monzogranite (phase 1). There are no obvious linear correlation between SiO₂ and most of the major and trace elements, and all rock samples fall within the fields of unfractional crystallization felsic granites in Zr + Nb + Ce + Y versus FeO^T/MgO and (K₂O + Na₂O)/CaO diagrams, indicating that partial melting rather than fractional crystallization has played an important role for the formation of the Tongcun intrusive complex. Magmatic inherited zircons from the Tongcun granitoids with the age peaked at 780–812 Ma, imply that the Neoproterozoic igneous rocks in the lower crust have been incorporated into the magma source. The uniform ε_Nd(t) (− 6.3 to − 7.3), initial ⁸⁷Sr/⁸⁶Sr, ²⁰⁷Pb/²⁰⁴Pb (15.596–15.621), and ²⁰⁸Pb/²⁰⁴Pb (38.374–38.650), as well as high K₂O contents (3.36–4.10 wt.%) and relatively high Mg# values (35.40 to 40.30) suggest the Tongcun intrusive complex was derived from partial melting of the thickened lower continental crust triggered by basaltic magma underplating plus additional input from the EM II mantle-derived basaltic melts. The Tongcun area was controlled by a compression setting related to the subduction of the Paleo–Pacific Plate in Mesozoic period.     

Zircon U–Pb and molybdenite Re–Os dating of the Chalukou porphyry Mo deposit in the northern Great Xing’an Range,China and its geological significance

The newly discovered Chalukou giant porphyry Mo deposit, located in the northern Great Xing’an Range, is the biggest Mo deposit in northeast China. The Chalukou Mo deposit occurs in an intermediate-acid complex and Jurassic volcano-sedimentary rocks, of which granite porphyry, quartz porphyry, and fine-grained granite are closely associated with Mo mineralization. However, the ages of the igneous rocks and Mo mineralization are poorly constrained. In this paper, we report precise in situ LA-ICP-MS zircon U–Pb dates for the monzogranite, granite porphyry, quartz porphyry, fine grained granite, rhyolite porphyry, diorite porphyry, and andesite porphyry in the Chalukou deposit, corresponding with ages of 162 ± 2 Ma, 149 ± 5 Ma, 148 ± 2 Ma, 148 ± 1 Ma, 137 ± 3 Ma, 133 ± 2 Ma, and 132 ± 2 Ma, respectively. Analyses of six molybdenite samples yielded a Re–Os isochron age of 148 ± 1 Ma. These data indicate that the sequence of the magmatic activity in the Chalukou deposit ranges from Jurassic volcano-sedimentary rocks and monzogranite, through late Jurassic granite porphyry, quartz porphyry, and fine-grained granite, to early Cretaceous rhyolite porphyry, diorite porphyry, and andesite porphyry. The Chalukou porphyry Mo deposit was formed in the late Jurassic, and occurred in a transitional tectonic setting from compression to extension caused by subduction of the Paleo-Pacific oceanic plate.     

Geochronological and geochemical constraints on the Erguna massif basement,NE China – subduction history of the Mongol–Okhotsk oceanic crust

We present new geochronological and geochemical data for granites and volcanic rocks of the Erguna massif, NE China. These data are integrated with previous findings to better constrain the nature of the massif basement and to provide new insights into the subduction history of Mongol–Okhotsk oceanic crust and its closure. U–Pb dating of zircons from 12 granites previously mapped as Palaeoproterozoic and from three granites reported as Neoproterozoic yield exclusively Phanerozoic ages. These new ages, together with recently reported isotopic dates for the metamorphic and igneous basement rocks, as well as Nd–Hf crustal-residence ages, suggest that it is unlikely that pre-Mesoproterozoic basement exists in the Erguna massif. The geochronological and geochemical results are consistent with a three-stage subduction history of Mongol–Okhotsk oceanic crust beneath the Erguna massif, as follows. (1) The Erguna massif records a transition from Late Devonian A-type magmatism to Carboniferous adakitic magmatism. This indicates that southward subduction of the Mongol–Okhotsk oceanic crust along the northern margin of the Erguna massif began in the Carboniferous. (2) Late Permian–Middle Triassic granitoids in the Erguna massif are distributed along the Mongol–Okhotsk suture zone and coeval magmatic rocks in the Xing’an terrane are scarce, suggesting that they are unlikely to have formed in association with the collision between the North China Craton and the Jiamusi–Mongolia block along the Solonker–Xra Moron–Changchun–Yanji suture zone. Instead, the apparent subduction-related signature of the granites and their proximity to the Mongol–Okhotsk suture zone suggest that they are related to southward subduction of Mongol–Okhotsk oceanic crust. (3) A conspicuous lack of magmatic activity during the Middle Jurassic marks an abrupt shift in magmatic style from Late Triassic–Early Jurassic normal and adakite-like calc-alkaline magmatism (pre-quiescent episode) to Late Jurassic–Early Cretaceous A-type felsic magmatism (post-quiescent episode). Evidently a significant change in geodynamic processes took place during the Middle Jurassic. Late Triassic–Early Jurassic subduction-related signatures and adakitic affinities confirm the existence of subduction during this time. Late Jurassic–Early Cretaceous post-collision magmatism constrains the timing of the final closure of the Mongol–Okhotsk Ocean involving collision between the Jiamusi–Mongolia block and the Siberian Craton to the Middle Jurassic.     

Geochronological and geochemical constraints on the intermediate-acid volcanic rocks along the Chiang Khong–Lampang–Tak igneous zone in NW Thailand and their tectonic implications

Volcanic rocks preserved in the Lampang–Den Chai area in NW Thailand are important components of the giant Paleotethyan igneous belt. Constraining their age and petrogenesis is critical for better understanding their temporal-spatial relationship with the Lancangjiang igneous zone and the Paleotethyan tectonic evolution in SE Asia. The volcanic suite is constituted by intermediate to acid rocks with zircon U–Pb ages of 240.4 ± 1.7 Ma and 240.6 ± 1.9 Ma for the representative andesitic and rhyolitic samples, respectively. Volcanic sequence is dominated by calc-alkaline andesites, dacites and rhyolites. The andesitic and dacitic samples are characterized by high Mg# (37–57) and TiO₂ (0.91–1.59 wt%), and can be classified as high-Mg series. They are enriched in LILEs and LREEs and depleted in HFSEs. Representative andesitic samples have ⁸⁷Sr/⁸⁶Sr (i) ratios of 0.70398–0.70567, ε_Nd (t) values of +3.6–+3.9, zircon ε_Hf (t) values of +2.8–+8.0 and δ¹⁸O values of 7.01–8.11‰, respectively. The rhyolitic samples are characterized by high Mg# (38–70) and low TiO₂ (0.25–0.61 wt%). They are enriched in LILEs and LREEs, along with ⁸⁷Sr/⁸⁶Sr (i) = 0.70468–0.70645, ε_Nd (t) = +2.0–+4.3 and zircon ε_Hf (t) = +5.7–+13.6. Geochemical signatures suggest that the andesitic and dacitic samples might originate from a newly modified mantle source by slab-derived fluids and recycled sediments, and rhyolitic samples were derived from juvenile mafic crust. It is proposed that the Middle Triassic high-Mg volcanic rocks in the Lampang–Den Chai area formed in response to slab roll-back during transition of tectonic regime from subduction to continental collision between the Sibumasu and Indochina blocks. These rocks constitute part of the Chiang Khong–Lampang–Tak igneous zone, and can northerly link with the Lancangjiang igneous zone and southerly extend to the Chanthaburi, Malaysia and Singapore areas.     

Re–Os geochronology on sulfides from the Tudun Cu–Ni sulfide deposit,Eastern Tianshan,and its geological significance

The Tudun deposit is a medium-sized Cu–Ni sulfide deposit, located at the westernmost edge of the Huangshan–Jing’erquan Belt in the northern part of Eastern Tianshan, NW China. Sulfide separates including pentlandite, pyrrhotite and chalcopyrite from the Tudun deposit, contain Re, common Os and ¹⁸⁷Os ranging from 40.46 to 201.2, 0.8048 to 6.246 and 0.1709 to 0.9977 ppb, respectively. They have very low ¹⁸⁷Os/¹⁸⁸Os ratios of 1.224–2.352. The sulfides yield a Re–Os isochron age of 270.0 ± 7.5 Ma (MSWD = 1.3), consistent within uncertainty with the SHRIMP zircon U–Pb age for the Tudun mafic intrusion (gabbro) of 280.0 ± 3.0 Ma. The calculated initial ¹⁸⁷Os/¹⁸⁸Os ratio is 0.533 ± 0.022, and γOs values range from 283 to 307, with a mean of 297, indicating significant crustal contamination of the parent melt prior to sulfide saturation. The Tudun deposit shares the same age and Re–Os isotopic compositions with other orthomagmatic Cu–Ni sulfide deposits in Huangshan–Jing’erquan Belt, suggesting that they have formed in Early Permian.     

Jurassic–Cretaceous tectonic evolution of Southeast China: geochronological and geochemical constraints of Yanshanian granitoids

We report results of laser ablation inductively coupled plasma-mass spectrometry-based dating, as well as the analysis of bulk-rock major and trace elements, and Sr–Nd isotopes to address the genesis and tectonic settings of the Yanshanian granitoids in neighbouring sections of Zhejiang, Jiangxi, and Anhui provinces (the WZG region) within the Yangtze block. Geochronological results indicate that intense magmatic activity took place during Jurassic to Cretaceous time in the WZG region. Three episodes can be clearly distinguished by their bulk-rock geochemistry. (1) Early–Middle Jurassic granitoids (180–170 Ma) have high Sr and low Yb content, high ?_Nd(t) and low initial ⁸⁷Sr/⁸⁶Sr ratios, and weakly negative Eu anomalies. These granitoids are strongly enriched with LREE, Rb, K, and Th but are depleted of HREE, Nb, and Ta. (2) Late Jurassic to Early Cretaceous granitoids (165–140 Ma) have relatively low Sr and low Yb contents, as well as low ?_Nd(t) and high initial ⁸⁷Sr/⁸⁶Sr ratios, with characteristics similar to those of the Early–Middle Jurassic granitoids in terms of the rare earth element and trace element patterns. (3) Early Cretaceous granitoids (140–120 Ma) have extremely low Sr and high Yb concentrations, as well as high SiO₂ but low MgO, CaO, and Al₂O₃ content, with strong negative anomalies in Eu, Ba, Sr, P, and Ti. These characteristics indicate that the WZG Jurassic granitoids were related to northwestward subduction of the Izanagi plate, whereas the Early Cretaceous granitoids formed in a within-plate extensional setting. The time of transition between the two tectonic environments can be constrained to ～140 Ma. This tectonic transition may be attributed to progressive slab roll-back of the Izanagi plate. The presence of two A-type granite belts in the WZG region probably reflects lithospheric thinning. The NE trend of the A-type granite belts indicates that this extension in Southeast China was controlled by underflow of the Izanagi plate.     

Skarn mineralogy and its geological significance for the Tayuan (Cu–Mo)–Pb–Zn deposit,northern Daxinganling metallogenic belt

The Tayuan (Cu–Mo)–Pb–Zn deposit is located in the northern part of Daxinganling, NE China. Lenticular ore body occurs in the skarn zone. The skarn minerals mainly include garnet, pyroxene, epidote and wollastonite. Electron microprobe analysis shows that the end member of garnet is mainly andradite (Ad_62–97Gr_11–45), the pyroxene is mainly diopside, and epidote is mainly clinozoisite. These characteristics indicate that the Tayuan polymetallic skarn deposit is mainly calcareous skarn. Sometimes the content zonation can be observed in garnets. With one garnet crystal, content is shifty from the core to the rim. In general, the iron content in the core is higher than in the edge. The content in the garnet shows that the garnet in the Tayuan deposit formed from weak oxidation in alkaline environment with the oxygen fugacity increasing, suggesting that the hydrothermal fluid evolved from an acidic to a slight alkaline state. In the Tayuan polymetallic deposit, the ratio of Mn/Fe in pyroxene is about 1.3, and of Mg/Fe, it is about 2. The components of garnet in the Tayuan deposit plot in the field of the typical skarn Zn, Cu, Mo deposits in the world.     

Geochronological and geochemical constraints on formation of the Tongling metal deposits,middle Yangtze metallogenic belt,east‐central China

The Tongling district is one of the most important non‐ferrous metal producers in China. The origin of Cu–Au deposits in the region is closely related to Late Mesozoic intermediate intrusions, which are mainly high‐K calc‐alkaline and shoshonitic series. Geochemical characteristics indicate that these granitic rocks are mixtures of more than two compositional end‐members, i.e. mantle‐derived melts and crust components incorporated through assimilation. Three important magmatic intrusions related to the Cu–Au deposits in the Tongling region – the Jiguanshi quartz monzodiorite, the Xishizishan quartz diorite and the Miaojia diorite porphyry – were selected for this study. Zircon U–Pb dating by LA ICP‐MS yielded two groups of ages (～130–132 and 138–140 Ma) for these intrusions. Pyrite Re–Os age for the Xinqiao Cu–Fe–S deposit in the Tongling region is 126±11 Ma. Trace elements of zircon grains show that the earlier Cu–Au mineralization event was associated with adakitic rocks characterized by high positive Ce anomalies, produced at an elevated oxygen fugacity range. In contrast, later iron‐sulphur mineralization was closely related to low positive Ce anomalies, reflecting low oxygen fugacities. Considering that Pacific lithospheric subduction was the dominant factor that controlled major tectonic evolution in eastern China during the Early Cretaceous, the geochemical characteristics of these coeval ore‐forming intermediate intrusive rocks in the Tongling district were likely the result of Pacific plate underflow.     

Geochronology and fluid inclusion study of the Yinjiagou porphyry–skarn Mo–Cu–pyrite deposit in the East Qinling orogenic belt,China

The Yinjiagou Mo–Cu–pyrite deposit of Henan Province is located in the Huaxiong block on the southern margin of the North China craton. It differs from other Mo deposits in the East Qingling area because of its large pyrite resource and complex associated elements. The deposit’s mineralization process can be divided into skarn, sulfide, and supergene episodes with five stages, marking formation of magnetite in the skarn episode, quartz–molybdenite, quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite, and calcite–galena–sphalerite in the sulfide episode, and chalcedony–limonite in the supergene episode. Re–Os and ⁴⁰Ar–³⁹Ar dating indicates that both the skarn-type and porphyry-type orebodies of the Yinjiagou deposit formed approximately 143 Ma ago during the Early Cretaceous. Four types of fluid inclusions (FIs) have been distinguished in quartz phenocryst, various quartz veins, and calcite vein. Based on petrographic observations and microthermometric criteria the FIs include liquid-rich, gas-rich, H₂O–CO₂, and daughter mineral-bearing inclusions. The homogenization temperature of FIs in quartz phenocrysts of K-feldspar granite porphyry ranges from 341 °C to >550 °C, and the salinity is 0.4–44.0 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite veins is 382–416 °C, and the salinity is 3.6–40.8 wt% NaCl eqv. The homogenization temperature of FIs in quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite ranges from 318 °C to 436 °C, and the salinity is 5.6–42.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite stockworks is in a range of 321–411 °C, and the salinity is 6.3–16.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–sericite–pyrite is in a range of 326–419 °C, and the salinity is 4.7–49.4 wt% NaCl eqv. The ore-forming fluids of the Yinjiagou deposit are mainly high-temperature, high-salinity fluids, generally with affinities to an H₂O–NaCl–KCl ± CO₂ system. The δ¹⁸O_H2O values of ore-forming hydrothermal fluids are 4.0–8.6‰, and the δD_V-SMOW values are between −64‰ and −52‰, indicating that the ore-forming fluids were primarily magmatic. The δ³⁴S_V-CDT values of sulfides range between −0.2‰ and 6.3‰ with a mean of 1.6‰, sharing similar features with deeply sourced sulfur, implying that the sulfur mainly came from the lower crust composed of poorly differentiated igneous materials, but part of the heavy sulfur came from the Guandaokou Group dolostone. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb values of sulfides are in the range of 17.331–18.043, 15.444–15.575, and 37.783–38.236, respectively, which is generally consistent with the Pb isotopic signature of the Yinjiagou intrusion, suggesting that the Pb chiefly originated from the felsic–intermediate intrusive rocks in the mine area, with a small amount of lead from strata. The Yinjiagou deposit is a porphyry–skarn deposit formed during the Mesozoic transition of a tectonic regime that is EW-trending to NNE-trending, and the multiepisode boiling of ore-forming fluids was the primary mechanism for mineral deposition.