Petrography and provenance of Upper Cretaceous – Palaeogene sandstones in the foreland basin system of Central Nepal

Sedimentary deposits of the Cretaceous to Miocene Tansen Group of Lesser Himalayan association in central Nepal record passive-margin sedimentation of the Indian Continent with direct deposition onto eroded Precambrian rocks (Sisne Formation onto Kaligandaki Supergroup rocks), succeeded by the appearance of orogenic detritus as the Indian continent collided with Asia on a N-dipping subduction zone. Rock samples from two field traverses were examined petrographically and through detrital zircon U–Pb dating, one traverse being across the Tansen Group and another across the Higher and Tethyan Himalaya (TH). The Tansen Group depositional ages are well known through fossil assemblages. We examined samples from three units of the Tansen Group (Amile, Bhainskati, and Dumri Formations). The Sedimentary petrographic data and Qt F L and Qm F Lt plots indicate their ‘Quartzose recycled’ nature and classify Tansen sedimentary rocks as ‘recycled orogenic’, suggesting Indian cratonic and Lower Lesser Himalayan (LLH) sediments as the likely source of sediments for the Amile Formation (Am), the TH and the Upper Lesser Himalaya (ULH) as the source for the Bhainskati Formation (Bk), and both the Tethyan and Higher Himalaya (HH) as the major sources for the Dumri Formation (Dm). The Cretaceous–Palaeocene pre-collisional Am is dominated by a broad detrital zircon U–Pb ~1830 Ma age peak with neither Palaeozoic nor Neoproterozoic zircons grains, but hosts a significant proportion (23%) of syndepositional Cretaceous zircons (121–105 Ma) would be contributions from the LLH volcanosedimentary arc, Gangdese batholith (including the Xigaze forearc). The other formations of the Tansen Group are more similar to Tethyan units than to Higher Himalaya Crystalline (HHC). From the analysed samples, there is a lack of distinctive evidence or HH detritus in the Tansen basin. Furthermore, the presence of ~23±1 Ma zircons from the HH unit suggests that they could not have been exposed until the earliest Miocene time.     

Detrital provenance evolution of the Ediacaran–Silurian Nanhua foreland basin,South China

We report here in-situ U–Pb and Hf isotopic results of detrital zircons from sixteen Cambrian–Silurian siliciclastic samples across the Nanhua foreland basin, South China. Together with published data from Ediacaran–Silurian sandstones in the region, we establish the temporal and spatial provenance evolution across the basin. Except for samples from northeast Yangtze, all other Ediacaran–Silurian samples exhibit a prominent population of 1100–900 Ma, moderate populations of 850–700 Ma and 650–490 Ma, and minor populations of 2500 Ma and 2000–1300 Ma, grossly matching that of crystalline and sedimentary rocks in northern India. Zircon Hf isotopes further reveal four episodes of juvenile crustal growth at 2.5 Ga, 1.8 Ga, 1.4 Ga and 1.0 Ga in the source regions. Utilizing the basin history and late Neoproterozoic to early Paleozoic paleogeography of South China, we conclude that the Ediacaran–Cambrian sediments in the Nanhua foreland basin were mainly sourced from northern India and adjacent orogens, and the Ordovician–Silurian sediments were derived from both locally recycled Ediacaran–Cambrian rocks and eroded Cathaysian basement. The Wuyi–Yunkai late-orogenic magmatic rocks also contributed to the Silurian sediments in the basin. The upper-Ordovician to Silurian samples in northeast Yangtze received higher proportions of local Cryogenian (850–700 Ma) magmatic rocks which were uplifted during late-Ordovician to Silurian time. We speculate that there was an Ediacaran–Cambrian collisional orogen between South China and northern India, shedding sediments to the early Nanhua foreland basin. Far-field stress during the late stage of this collisional orogeny triggered the Ordovician–Silurian intraplate Wuyi–Yunkai orogeny in South China, and erosion of the local Wuyi–Yunkai orogen further provided detritus to the late Nanhua foreland basin.     

Tectonostratigraphy and depositional history of the Neoproterozoic volcano-sedimentary sequences in Kid area,southeastern Sinai,Egypt: Implications for intra-arc to foreland basin in the northern Arabian–Nubian Shield

This paper presents a stratigraphic and sedimentary study of Neoproterozoic successions of the South Sinai, at the northernmost segment of the Arabian–Nubian Shield (ANS), including the Kid complex. This complex is composed predominantly of thick volcano-sedimentary successions representing different depositional and tectonic environments, followed by four deformational phases including folding and brittle faults (D₁–D₄). The whole Kid area is divisible from north to south into the lower, middle, and upper rock sequences. The higher metamorphic grade and extensive deformational styles of the lower sequence distinguishes them from the middle and upper sequences. Principal lithofacies in the lower sequence include thrust-imbricated tectonic slice of metasediments and metavolcanics, whereas the middle and upper sequences are made up of clastic sediments, intermediate-felsic lavas, volcaniclastics, and dike swarms. Two distinct Paleo- depositional environments are observed: deep-marine and alluvial fan regime. The former occurred mainly during the lower sequence, whereas the latter developed during the other two sequences. These alternations of depositional conditions in the volcano-sedimentary deposits suggest that the Kid area may have formed under a transitional climate regime fluctuating gradually from warm and dry to warm and humid conditions.Geochemical and petrographical data, in conjunction with field relationships, suggest that the investigated volcano-sedimentary rocks were built from detritus derived from a wide range of sources, ranging from Paleoproterozoic to Neoproterozoic continental crust. Deposition within the ancient Kid basin reflects a complete basin cycle from rifting and passive margin development, to intra-arc and foreland basin development and, finally, basin closure. The early phase of basin evolution is similar to various basins in the Taupo volcanics, whereas the later phases are similar to the Cordilleran-type foreland basin. The progressive change in lithofacies from marine intra-arc basin to continental molasses foreland basin and from compression to extension setting respectively, imply that the source area became peneplained, where the Kid basin became stabilized as sedimentation progressed following uplift. The scenario proposed of the study area supports the role of volcanic and tectonic events in architecting the facies and stratigraphic development.     

Palaeoproterozoic mid‐basin inversion in the northern Mt Isa terrane,Queensland

The Mellish Park Syncline is located in the northern part of the Mt Isa terrane. It has an axial trace that transects the remnants of the unconformity‐bounded Palaeoproterozoic Leichhardt and Isa Superbasins. The syncline is separated into a lower and upper component based upon variation in fold geometry across the basin‐bounding unconformity. The lower syncline, in the Leichhardt Superbasin, is tight and has an inclined west‐dipping axial plane. The upper syncline, in the Isa Superbasin, is open and upright. The geometry of the lower syncline is a consequence of a period of shortening and basin inversion which post‐dated the Leichhardt Rift Event (ca 1780–1740 Ma) and pre‐dated the Mt Isa Rift Event (ca 1710–1655 Ma), forming an open and upright north‐oriented syncline. Subsequent southeast tilting and half‐graben development during the Mt Isa Rift Event resulted in the lower syncline being tilted into its inclined geometry. Sequences of the Isa Superbasin were then deposited onto the eroded syncline. The geometry of the upper syncline reflects regional east‐west shortening during the Isan Orogeny (ca 1590–1500 Ma). The position of the upper syncline was largely controlled by the pre‐existing lower syncline. At this time the lower syncline was reactivated and tightened by flexural slip folding.     

Synorogenic alluvial-fan – fan-delta deposition in the Papuan foreland basin: Plio-Pleistocene Era Formation,Papua New Guinea

The Pliocene to possibly Pleistocene uppermost Orubadi and Era Formations, southwest margin of the Papuan Peninsula, are interpreted as having been deposited in alluvial-fan, fan-delta and shallow-marine environments. The alluvial-fan facies consists primarily of lenticular, coarse-grained conglomerate (up to 2 m boulders) and cross-bedded and horizontally laminated sandstone. Conglomerate and sandstone were deposited in shallow fluvial channels and by overbank sheetfloods. The facies also contains thick mudflow diamictite and minor tuff and terrestrial mudstone. The shallow-marine and fan-delta facies, in contrast, consists of heterogeneously interbedded marine and terrestrial mudstone, sandstone, diamictite, conglomerate and limestone. Marine mudstone is calcareous, sandy, bioturbated, and contains marine shells. Limestone is mostly packstone that has a varied, open-marine fauna. Rare coral boundstone is also present. Marine sandstone is burrowed to bioturbated and is hummocky cross-stratified in places. Some marine mudstone contains sandstone pillows formed by loading of unconsolidated sand by storm waves. Other sandstone in the fan-delta facies is cross-bedded, lacks shells and was probably deposited by fluvial processes. Several conglomerate beds in the fan-delta facies are well sorted and imbricated and were also deposited by stream floods. The synorogenic Orubadi and Era Formations were deposited in a foreland basin formed from loading of the Papuan–Aure Fold and Thrust Belt on the edge of the Australian craton. Deformation in the fold and thrust belt was probably related to docking and compression of the Finisterre Terrane–Bismarck Arc against the New Guinea Orogen. The Era Formation interfingers with the reefal Wedge Hill Limestone in which reef facies likely grew on a deforming anticline. Era Formation siliciclastics were sourced from volcanic, metamorphic and sedimentary rocks that were uplifted in the orogen to the northeast. Volcanic sediment was derived mostly from a then-active volcanic arc likely related to southward subduction at the Trobriand Trough.     

Detrital zircon U–Pb ages of Late Triassic–Late Jurassic deposits in the western and northern Sichuan Basin margin: constraints on the foreland basin provenance and tectonic implications

Upper Triassic to Upper Jurassic strata in the western and northern Sichuan Basin were deposited in a synorogenic foreland basin. Ion–microprobe U–Pb analysis of 364 detrital zircon grains from five Late Triassic to Late Jurassic sandstone samples in the northern Sichuan Basin and several published Middle Triassic to Middle Jurassic samples in the eastern Songpan–Ganzi Complex and western and inner Sichuan Basin provide an initial framework for understanding the Late Triassic to Late Jurassic provenance of western and northern Sichuan Basin. For further understanding, the paleogeographic setting of these areas and neighboring hinterlands was constructed. Combined with analysis of depocenter migration, thermochronology and detrital zircon provenance, the western and northern Sichuan Basin is displayed as a transferred foreland basin from Late Triassic to Late Jurassic. The Upper Triassic Xujiahe depocenter was located at the front of the Longmen Shan belt, and sediments in the western Sichuan Basin shared the same provenances with the Middle–Upper Triassic in the Songpan–Ganzi Complex, whereas the South Qinling fed the northern Sichuan Basin. The synorogenic depocenter transferred to the front of Micang Shan during the early Middle Jurassic and at the front of the Daba Shan during the middle–late Middle Jurassic. Zircons of the Middle Jurassic were sourced from the North Qinling, South Qinling and northern Yangtze Craton. The depocenter returned to the front of the Micang Shan again during the Late Jurassic, and the South Qinling and northern Yangtze Craton was the main provenance. The detrital zircon U–Pb ages imply that the South and North China collision was probably not finished at the Late Jurassic.     

Early–Middle Jurassic evolution of the northern Yangtze foreland basin: a record of uplift following Triassic continent–continent collision to form the Qinling–Dabieshan orogenic belt

The northern Yangtze foreland basin system was formed during the Mesozoic continental collision between the North and South China plates along the Mianlue suture. In response to the later phase of intra-continental thrust deformation, an extensive E–W-trending molasse basin with river, deltaic, and lake deposits was produced in front of the southern Qinling–Dabieshan foreland fold-and-thrust belt during the Early–Middle Jurassic (201–163 Ma). The basin originated during the Early Jurassic (201–174 Ma) and substantially subsided during the Middle Jurassic (174–163 Ma). A gravelly alluvial fan depositional system developed in the lower part of the Baitianba Formation (Lower Jurassic) and progressively evolved into a meandering river fluvial plain and lake systems to the south. The alluvial fan conglomerates responded to the initial uplift of the southern Qinling–Dabieshan foreland fold-and-thrust belt after the oblique collision between the Yangtze and North China plates during the Late Triassic. The Qianfoya Formation (lower Middle Jurassic) mainly developed from shore-shallow lacustrine depositional systems. The Shaximiao Formation (upper Middle Jurassic) predominantly consists of thick-bedded braided river delta successions that serve as the main body of the basin-filling sequences. The upward-coarsening succession of the Shaximiao Formation was controlled by intense thrusting in the southern Qinling–Dabieshan fold-and-thrust belt. Palaeogeographic reconstructions indicated an extensive E–W foredeep depozone along the fold-and-thrust belt during the Middle Jurassic (174–163 Ma) that was nearly 150 km wide. The depozone extended westward to the Longmenshan and further east to the northern middle Yangtze plate. The northern Yangtze foreland basin was almost completely buried or modified by the subsequent differential thrusting of Dabashan and its eastern regions (Late Jurassic to Cenozoic).     

A review of the Late Jurassic–Early Cretaceous charophytes from the northern Aquitaine Basin in south-west France

Late Jurassic and Early Cretaceous charophyte assemblages from the northern part of the Aquitaine Basin in south-west France are reviewed here to understand their palaeoecological, palaeobiogeographical and biostratigraphic features. Three sites were studied: the Tithonian-lower Berriasian of Chassiron, and the Berriasian of Cherves-de-Cognac and Angeac-Charente. Abundant porocharaceans, less abundant clavatoraceans and scarce characeans recorded in Cherves-de-Cognac and Angeac-Charente indicate that brackish water environments were substituted by freshwater environments eastwards. The occurrence of Clavator grovesii var. grovesii and morphotypes intermediate with C. grovesii var. discordis in the same areas is significant from a biostratigraphic viewpoint, since these species belong to the Maillardii, Incrassatus and Nurrensis European charophyte biozones, representing the Berriasian. This observation refutes a previous dating of the Angeac-Charente site and highlights the absence of Hauterivian–Barremian records in northern Aquitaine, which is in contrast to the more complete Lower Cretaceous record in southern Aquitaine. These contrasting records could be due to differences in the available sedimentary space produced by the opening of the Bay of Biscay during the Barremian.     

Lode–gold mineralization in the Tanami region, northern Australia

The Tanami region of northern Australia has emerged over the last two decades as the largest gold-producing region in the Northern Territory. Gold is hosted by epigenetic quartz veins in sedimentary and mafic rocks, and by sulfide-rich replacement zones within iron formation. Although limited, geochronological data suggest that most mineralization occurred at about 1,805–1,790 Ma, during a period of extensive granite intrusion, although structural relationships suggest that some deposits predate this period. There are three main goldfields in the Tanami region: the Dead Bullock Soak goldfield, which hosts the world-class Callie deposit; The Granites goldfield; and the Tanami goldfield. In the Dead Bullock Soak goldfield, deposits are hosted by carbonaceous siltstone and iron formation where a late (D₅) structural corridor intersects an early F₁ anticlinorium. In The Granites goldfield, deposits are hosted by highly sheared iron formation and are interpreted to predate D₅. The Tanami goldfield consists of a large number of small, mostly basalt-hosted deposits that probably formed at a high structural level during D₅. The D₅ structures that host most deposits formed in a convergent structural regime with σ ₁ oriented between E–W and ENE–WSW. Structures active during D₅ include NE-trending oblique thrust (dextral) faults and ESE-trending (sinistral) faults that curve into N- to NNW-trending reverse faults localized in supracrustal belts between and around granite complexes. Granite intrusions also locally perturbed the stress field, possibly localizing structures and deposits. Forward modeling and preliminary interpretations of reflection seismic data indicate that all faults extend into the mid-crust. In areas characterized by the N- to NW-trending faults, orebodies also tend to be N- to NW-trending, localized in dilational jogs or in fractured, competent rock units. In areas characterized by ESE-trending faults, the orebodies and veins tend to strike broadly east at an angle consistent with tensional fractures opened during E–W- to ENE–WSW-directed transpression. Many of these deposits are hosted by reactive rock units such as carbonaceous siltstone and iron formation. Ore deposition occurred at depths ranging from 1.5 to 11 km from generally low to moderate salinity carbonic fluids with temperatures from 200 to 430°C, similar to lode–gold fluids elsewhere in the world. These fluids are interpreted as the product of metamorphic dewatering caused by enhanced heat flow, although it is also possible that the fluids were derived from coeval granites. Lead isotope data suggest that lead in the ore fluids had multiple sources. Hydrogen and oxygen isotope data are consistent with both metamorphic and magmatic origins for ore fluids. Gold deposition is interpreted to be caused by fluid unmixing and sulfidation of host rocks. Fluid unmixing is caused by three different processes: (1) CO₂ unmixing caused by interaction of ore fluids with carbonaceous siltstone; (2) depressurization caused by pressure cycling in shear zones; and (3) boiling as ore fluids move to shallow levels. Deposits in the Tanami region may illustrate the continuum model of lode–gold deposition suggested by Groves (Mineralium Deposita 28:366–374, 1993) for Archean districts.     

Early Cretaceous continental arc-related volcanic rocks in the Duobuzha area,northern Tibet: implications for evolution history of the Bangong–Nujiang Ocean

New whole-rock major and trace elements data, zircon laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U–Pb ages, and zircon Hf isotope compositions were analysed for Early Cretaceous volcanic rocks, also called Meiriqieco Formation (MF) in the Duobuzha area of the Southern Qiangtang–Baoshan Block (SQBB), northern Tibet. Our aim is to clarify their petrogenesis and tectonic setting, and constrain the evolution process on the northern margin of Bangong–Nujiang suture zone (BNSZ) during Early Cretaceous time. The MF volcanic rocks are mainly composed of andesites with subordinate basalts and rhyolites with high-K calc-alkaline affinity. Zircon LA-ICP-MS U–Pb dating for two andesite and one rhyolite samples give uniform ages within error of ca.113, 114, and 118 Ma, respectively, indicating they were erupted on the Early Cretaceous. The MF andesites have variable zircon ε_Hf(t) values (+0.5 to +10.5), which is different from those of MF rhyolites (+7.9 to +10.7). All the MF rocks are enriched in large ion lithophile elements, and depleted in high field strength elements, yielding the affinity of arc rocks. The MF basalts were most likely derived from the mantle wedge that was metasomatized by fluids released from subducting slab with the involvement of subducted sediments. The MF rhyolites were generated by partial melting of the juvenile mafic lower crust. The MF andesites are interpreted to have formed by mixing of the magmas that parental of the MF basalts and the MF rhyolites. In addition, a couple of distinctly magmatic sources are identified in the SQBB, and this may be related to mantle components injected into the continental crust. Combined with published geological data in the BNSZ and SQBB, we consider that the MF volcanic rocks are formed in a continental arc setting, suggesting that BNO were subducting during the Early Cretaceous time in the Duobuzha area.     

Anoxia in the Domanik basin of the Timan–Pechora region

Analysis of the carbon isotopic composition in aryl carotenoid derivatives, including isorenieratene, in bitumen from domanikoid rocks of the sections cropping out along the Chut River revealed that they contain anomalously heavy carbon, which is determined by the formation of these compounds from green sulfur bacteria of the family Chlorobiaceae. These bacteria use the peculiar process of carbon fixing as HCO₃^? in the reversed tricarboxilic acid cycle. The fact of hydrosulfuric contamination of the photic water layer in the Domanik basin is confirmed by the plurality of data. Anoxity in shelf water of the middle Frasnian Timan–Pechora basin is evident from lithological features such as, for example, lamination of some rocks and mass death of the fauna.     

New data on the magnetostratigraphy of the Jurassic–Cretaceous boundary interval,Nordvik Peninsula (northern East Siberia)

The results of this study were used to identify a reversed polarity magnetozone, referred to as M17r, in Berriasian sections of the Nordvik Peninsula (northern East Siberia) within the normal polarity magnetozone (M18n) from previous studies. The new magnetozone embraces the Volgian–Ryazanian boundary (Chetaites chetae/C. sibiricus zonal boundary). It was also found that the former magnetozone M17r at Nordvik, which includes the C. sibiricus/Hectoroceras kochi zonal boundary should correspond to magnetozone M16r. Using magnetostratigraphic and biostratigraphic criteria proves that the Boreal C. sibiricus Zone is correlated with at least the major part of the Tethyan Tirnovella occitanica Zone, and the Boreal H. kochi Zone is correlated with the lower part of the Malbosiceras paramimounum Subzone of the Tethyan Fauriella boissieri Zone.     

Non-marine gastropods from the Cretaceous–Paleogene transition in the Pingyi Basin,eastern China

Our results present a taxonomic and palaeoecological study on non-marine gastropods from the latest Cretaceous to Paleocene deposits of the Pingyi Basin, Shandong Province, eastern China. These gastropods are systematically described: three species belonging to three genera including Physa dongtaiensis Gu, 1989, Hydrobia datangensis Yü, 1977, and the newly established species Cyathopoma pingyiensis sp. nov.; two indeterminata genera and species including Truncatelloidea gen. et sp. indet., and Pomatiopsidae gen. et sp. indet. Among them, Truncatelloidea gen. et sp. indet. and Cyathopoma pingyiensis sp. nov. are the dominant species with the longest record. Cyathopoma pingyiensis, sp. nov. is the earliest representative of this widely distributed Asian extant genus. Sedimentological facies analysis of the gastropod-bearing beds suggested that Truncatelloidea gen. et sp. indet. lived in a small pond with a river inlet and a shallow lake, while Ph. dongtaiensis, ?Pomatiopsidae gen. et sp. indet, and ?H. datangensis only thrived in the shallow lake. Cyathopoma pingyiensis sp. nov. inhabited the land area around the shallow lake. Our results showed that no significant species change of the gastropod fauna across the K/Pg (Cretaceous/Paleogene) boundary was observed in the Pingyi Basin.     

Integrated provenance analysis of a convergent retroarc foreland system: U–Pb ages,heavy minerals,Nd isotopes,and sandstone compositions of the Middle Magdalena Valley basin,northern Andes,Colombia

Sediment provenance analysis remains a powerful method for testing hypotheses on the temporal and spatial evolution of uplifted source regions, but issues such as recycling, nonunique sources, and pre- and post-depositional modifications may complicate interpretation of results from individual provenance techniques. Convergent retroarc systems commonly contain sediment sources that are sufficiently diverse (continental magmatic arc, fold–thrust belt, and stable craton) to enable explicit provenance assessments. In this paper, we combine detrital zircon U–Pb geochronology, heavy mineral identification, Nd isotopic analyses, conventional sandstone petrography, and paleocurrent measurements to reconstruct the clastic provenance history of a long-lived sedimentary basin now exposed in an intermontane zone of the northern Andean hinterland of Colombia. The Middle Magdalena Valley basin, situated between the Central Cordillera and Eastern Cordillera, contains a 5–10 km-thick succession of Upper Cretaceous to Quaternary fill. The integrated techniques show a pronounced change in provenance during the Paleocene transition from the lower to upper Lisama Formation. We interpret this as a shift from an eastern cratonic source to a western Andean source composed of magmatic-arc rocks uplifted during initial shortening of the Central Cordillera. The appearance of detrital chloritoid and a shift to more negative ε_Nd(t=0) values in middle Eocene strata of the middle La Paz Formation are attributed to shortening-related exhumation of a continental basement block (La Cira–Infantas paleohigh), now buried, along the axis of the Magdalena Valley. The diverse provenance proxies also show distinct changes during middle to late Eocene deposition of the Esmeraldas Formation that likely reflect initial rock uplift and exhumation of the fold–thrust belt defining the Eastern Cordillera. Upsection, detrital zircon U–Pb ages and heavy mineral assemblages for Oligocene and younger clastic deposits indicate that the Mesozoic sedimentary cover of the Eastern Cordillera was recycled during continued Cenozoic shortening. Our multidisciplinary provenance study refines the tectonic history of the Colombian Andes and demonstrates that uncertainties related to sediment recycling, nonunique sources, source heterogeneity, and climate in interpreting provenance data can be minimized via an integrated approach.     

The Itaja�� foreland basin: a tectono-sedimentary record of the Ediacaran period, Southern Brazil

The Itajaí Basin located in the southern border of the Luís Alves Microplate is considered as a peripheral foreland basin related to the Dom Feliciano Belt. It presents an excellent record of the Ediacaran period, and its upper parts display the best Brazilian example of Precambrian turbiditic deposits. The basal succession of Itajaí Group is represented by sandstones and conglomerates (Baú Formation) deposited in alluvial and deltaic-fan systems. The marine upper sequences correspond to the Ribeir?o Carvalho (channelized and non-channelized proximal silty-argillaceous rhythmic turbidites), Ribeir?o Neisse (arkosic sandstones and siltites), and Ribeir?o do Bode (distal silty turbidites) formations. The Apiúna Formation felsic volcanic rocks crosscut the sedimentary succession. The Cambrian Subida leucosyenogranite represents the last felsic magmatic activity to affect the Itajaí Basin. The Brusque Group and the Florianópolis Batholith are proposed as source areas for the sediments of the upper sequence. For the lower continental units the source areas are the Santa Catarina, S?o Miguel and Camboriú complexes. The lack of any oceanic crust in the Itajaí Basin suggests that the marine units were deposited in a restricted, internal sea. The sedimentation started around 600?Ma and ended before 560?Ma as indicated by the emplacement of rhyolitic domes. The Itajaí Basin is temporally and tectonically correlated with the Camaqu? Basin in Rio Grande do Sul and the Arroyo del Soldado/Piriápolis Basin in Uruguay. It also has several tectono-sedimentary characteristics in common with the African-equivalent Nama Basin.     

Specific facies differentiation of Early Cretaceous (Berriasian–Hauterivian) foraminifer communities in the Ust’-Yenisei basin

This paper is concerned with study and comparison of Berriasian, Valanginian, and lower Hauterivian foraminifer associations in northeastern West Siberia. Micropaleontological analysis of the Lower Cretaceous deposits of the Ust’-Yenisei region has given an insight into the taxonomic composition of microfossils in the studied sections. Analysis of the stratigraphic occurrence of foraminifers has revealed four successive biostratons in zones and beds. Communities of Berriasian, Valanginian, and earliest Hauterivian microbenthos are reconstructed, the regularities of their evolution are established, and the succession of bionomic zones is determined.     

Jurassic–Cretaceous granitoids and related tectono-metallogenesis in the Zapug–Duobuza arc,western Tibet

The Zapug–Duobuza magmatic arc (ZDMA), located along the southern edge of the south Qiangtang terrane in western Tibet, extends east–west for ~ 400 km. Small scattered granite and porphyry intrusions crop out in the ZDMA, but a large amount of granite may be buried by Late Cretaceous to Paleogene thrusting. Two stages of magmatism have been identified, at 170–150 Ma and 130–110 Ma. The widely distributed Middle–Late Jurassic granite intrusions in the ZDMA exhibit SrNd isotopic characteristics similar to those of ore-bearing porphyries in the Duolong giant CuAu deposit, and their εHf(t) values mostly overlap those of other porphyry CuMo deposits in the ZDMA and the Gangdese zone. The SrNdHf isotopic geochemistry suggests variable contributions of mantle and Qiangtang crustal sources, and indicates the presence of two new ore districts with potentials for CuAu, Fe, and PbZn ores, located in the Jiacuo–Liqunshan and Larelaxin–Caima areas. Except for the Duolong ore-forming porphyries, which show significant contributions of mantle components intruded into an accretionary mélange setting, the Early Cretaceous granites in other areas of the belt are of mostly crustal origin, from sources in Qiangtang felsic basement and Permo-Carboniferous strata, indicating the weak ore-forming potential of skarn-type Fe and PbZn deposits. The ephemeral but deep Bangong Co–Nujiang ocean in the Early Jurassic evolved into a shallow compressional marine basin in the Middle–Late Jurassic, possibly transitioning to northward flat subduction of oceanic crust at this time. The subducted slab broke off in the Early Cretaceous, initiating a peak in arc magmatism and metallogenesis at 125–110 Ma.