Rare earth element diffusion in a natural pyrope single crystal at 2.8 GPa

Volume diffusion rates of Ce, Sm, Dy, and Yb have been measured in a natural pyrope-rich garnet single crystal (Py₇₁Alm₁₆Gr₁₃) at a pressure of 2.8 GPa and temperatures of 1,200-1,450 °C. Pieces of a single gem-quality pyrope megacryst were polished, coated with a thin layer of polycrystalline REE oxide, then annealed in a piston cylinder device for times between 2.6 and 90 h. Diffusion profiles in the annealed samples were measured by SIMS depth profiling. The dependence of diffusion rates on temperature can be described by the following Arrhenius equations (diffusion coefficients in m²/s): % MathType!MTEF!2!1!+- % feaaeaart1ev0aaatCvAUfKttLearuavTnhis1MBaeXatLxBI9gBam % XvP5wqSXMqHnxAJn0BKvguHDwzZbqegm0B1jxALjhiov2DaeHbuLwB % Lnhiov2DGi1BTfMBaebbfv3ySLgzGueE0jxyaibaieYlf9irVeeu0d % Xdh9vqqj-hEeeu0xXdbba9frFj0-OqFfea0dXdd9vqaq-JfrVkFHe9 % pgea0dXdar-Jb9hs0dXdbPYxe9vr0-vr0-vqpWqaaeaabiGaciaaca % qabeaadaabauaaaOqaauaabeqaeeaaaaqaaiGbcYgaSjabc+gaVjab % cEgaNnaaBaaaleaacqaIXaqmcqaIWaamaeqaaOGaemiraq0aaSbaaS % qaaiabbMfazjabbkgaIbqabaGccqGH9aqpcqGGOaakcqGHsislcqaI % 3aWncqGGUaGlcqaI3aWncqaIZaWmcqGHXcqScqaIWaamcqGGUaGlcq % aI5aqocqaI3aWncqGGPaqkcqGHsisldaqadaqaaiabiodaZiabisda % 0iabiodaZiabgglaXkabiodaZiabicdaWiaaysW7cqqGRbWAcqqGkb % GscaaMe8UaeeyBa0Maee4Ba8MaeeiBaW2aaWbaaSqabeaacqqGTaql % cqqGXaqmaaGccqGGVaWlcqaIYaGmcqGGUaGlcqaIZaWmcqaIWaamcq % aIZaWmcqWGsbGucqWGubavaiaawIcacaGLPaaaaeaacyGGSbaBcqGG % VbWBcqGGNbWzdaWgaaWcbaGaeGymaeJaeGimaadabeaakiabdseaen % aaBaaaleaacqqGebarcqqG5bqEaeqaaOGaeyypa0JaeiikaGIaeyOe % I0IaeGyoaKJaeiOla4IaeGimaaJaeGinaqJaeyySaeRaeGimaaJaei % Ola4IaeGyoaKJaeG4naCJaeiykaKIaeyOeI0YaaeWaaeaacqaIZaWm % cqaIWaamcqaIYaGmcqGHXcqScqaIZaWmcqaIWaamcaaMe8Uaee4AaS % MaeeOsaOKaaGjbVlabb2gaTjabb+gaVjabbYgaSnaaCaaaleqabaGa % eeyla0IaeeymaedaaOGaei4la8IaeGOmaiJaeiOla4IaeG4mamJaeG % imaaJaeG4mamJaemOuaiLaemivaqfacaGLOaGaayzkaaaabaGagiiB % aWMaei4Ba8Maei4zaC2aaSbaaSqaaiabigdaXiabicdaWaqabaGccq % WGebardaWgaaWcbaGaee4uamLaeeyBa0gabeaakiabg2da9iabcIca % OiabgkHiTiabiMda5iabc6caUiabikdaYiabigdaXiabgglaXkabic % daWiabc6caUiabiMda5iabiEda3iabcMcaPiabgkHiTmaabmaabaGa % eG4mamJaeGimaaJaeGimaaJaeyySaeRaeG4mamJaeGimaaJaaGjbVl % abbUgaRjabbQeakjaaysW7cqqGTbqBcqqGVbWBcqqGSbaBdaahaaWc % beqaaiabb2caTiabbgdaXaaakiabc+caViabikdaYiabc6caUiabio % daZiabicdaWiabiodaZiabdkfasjabdsfaubGaayjkaiaawMcaaaqa % aiGbcYgaSjabc+gaVjabcEgaNnaaBaaaleaacqaIXaqmcqaIWaamae % qaaOGaemiraq0aaSbaaSqaaiabboeadjabbwgaLbqabaGccqGH9aqp % cqGGOaakcqGHsislcqaI5aqocqGGUaGlcqaI3aWncqaI0aancqGHXc % qScqaIYaGmcqGGUaGlcqaI4aaocqaI0aancqGGPaqkcqGHsisldaqa % daqaaiabikdaYiabiIda4iabisda0iabgglaXkabiMda5iabigdaXi % aaysW7cqqGRbWAcqqGkbGscaaMe8UaeeyBa0Maee4Ba8MaeeiBaW2a % aWbaaSqabeaacqqGTaqlcqqGXaqmaaGccqGGVaWlcqaIYaGmcqGGUa % GlcqaIZaWmcqaIWaamcqaIZaWmcqWGsbGucqWGubavaiaawIcacaGL % Paaaaaaaaa!0C76!

Experimental investigation of zoisite–clinozoisite phase equilibria in the system CaO–Fe2O3–Al2O3–SiO2–H2O

The system Ca₂Al₃Si₃O₁₁(O/OH)-Ca₂Al₂FeSi₃O₁₁(O/OH), with emphasis on the Al-rich portion, was investigated by synthesis experiments at 0.5 and 2.0 GPa, 500-800 °C, using the technique of producing overgrowths on natural seed crystals. Electron microprobe analyses of overgrowths up to >100 µm wide have located the phase transition from clinozoisite to zoisite as a function of P-T-X_ps and a miscibility gap in the clinozoisite solid solution. The experiments confirm a narrow, steep zoisite-clinozoisite two-phase loop in T-X_ps section. Maximum and minimum iron contents in coexisting zoisite and clinozoisite are given by X_ps^zo (max) = 1.9*10 ^{- 4} T+ 3.1*10 ^{- 2} P - 5.36*10 ^{- 2}{\rm X}_{{\rm ps}}^{{\rm zo}} {\rm (max) = 1}{\rm .9*10}^{ - 4} T{\rm + 3}{\rm .1*10}^{ - 2} P - {\rm 5}{\rm .36*10}^{ - 2} and X_ps^czo (min) = (4.6 * 10 ^{- 4} - 4 * 10 ^{- 5} P)T + 3.82 * 10 ^{- 2} P - 8.76 * 10 ^{- 2}{\rm X}_{{\rm ps}}^{{\rm czo}} {\rm (min)} = {\rm (4}{\rm .6} * {\rm 10}^{ - {\rm 4}} - 4 * {\rm 10}^{ - {\rm 5}} P{\rm )}T + {\rm 3}{\rm .82} * {\rm 10}^{ - {\rm 2}} P - {\rm 8}{\rm .76} * {\rm 10}^{ - {\rm 2}} (P in GPa, T in °C). The iron-free end member reaction clinozoisite = zoisite has equilibrium temperatures of 185ᇆ °C at 0.5 GPa and 0ᇆ °C at 2.0 GPa, with (H_r⁰=2.8ǃ.3 kJ/mol and (S_r⁰=4.5ǃ.4 J/mol2K. At 0.5 GPa, two clinozoisite modifications exist, which have compositions of clinozoisite I ~0.15 to 0.25 X_ps and clinozoisite II >0.55 X_ps. The upper thermal stability of clinozoisite I at 0.5 GPa lies slightly above 600 °C, whereas Fe-rich clinozoisite II is stable at 650 °C. The schematic phase relations between epidote minerals, grossular-andradite solid solutions and other phases in the system CaO-Al₂O₃-Fe₂O₃-SiO₂-H₂O are shown.     

Groundwater quality assessment from a hard rock terrain, Salem district of Tamilnadu, India

A total of 162 groundwater samples for three representative seasons were collected from Salem district of Tamilnadu, India to decipher hydrogeochemistry and groundwater quality for determining its suitability for drinking and agricultural proposes. The water is neutral to alkaline in nature with pH ranging from 6.6 to 8.6 with an average of 8.0. Higher electrical conductivity was observed during post-monsoon season. The abundance of major ions in the groundwater was in the order of $ {\text{Na} > \text{Ca} > \text{Mg} > \text{K} = \text{Cl} > \text{HC}}{{\text{O}}_3}\; > \;{\text{S}}{{\text{O}}_4}\; > \;{\text{N}}{{\text{O}}_3} $ . Piper plot reveals the dominance of geochemical facies as mixed Ca–Mg–Cl, Na–Cl, Ca–HCO₃, Ca–Na–HCO₃, and Ca–Cl type. NO₃, Cl, SO₄, and F exceed the permissible limit during summer and post-monsoon seasons. Sodium adsorption ratio was higher during post-monsoon and southwest monsoon season indicating high and low salinity, satisfactory for plants having moderate salt tolerance on soils. Permeability index of water irrespective of season falls in class I and class II indicating water is moderate to good for irrigation purposes. As per the classification of water for irrigation purpose, water is fit for domestic and agricultural purposes with minor exceptions irrespective of seasons.     

The effect of H<Subscript>2</Subscript>O on the olivine liquidus of basaltic melts: experiments and thermodynamic models

We designed and carried out experiments to investigate the effect of H₂O on the liquidus temperature of olivine-saturated primitive melts. The effect of H₂O was isolated from other influences by experimentally determining the liquidus temperatures of the same melt composition with various amounts of H₂O added. Experimental data indicate that the effect of H₂O does not depend on pressure or melt composition in the basaltic compositional range. The influence of H₂O on melting point lowering can be described as a polynomial function This expression can be used to account for the effect of H₂O on olivine-melt thermometers, and can be incorporated into fractionation models for primitive basalts. The non-linear effect of H₂O indicates that incorporation of H₂O in silicate melts is non-ideal, and involves interaction between H₂O and other melt components. The simple speciation approach that seems to account for the influence of H₂O in simple systems (albite-H₂O, diopside-H₂O) fails to describe the mixing behavior of H₂O in multi-component silicate melts. However, a non-ideal solution model that treats the effect of H₂O addition as a positive excess free energy can be fitted to describe the effect of melting point lowering.     

Ferric iron partitioning between plagioclase and silicate liquid: thermodynamics and petrological applications

A series of Fe and Mg partition experiments between plagioclase and silicate liquid were performed in the system SiO₂-Al₂O₃-Fe₂O₃-FeO-MgO-CaO-Na₂O under oxygen fugacities from below the IW buffer up to that of air. A thermodynamic model of plagioclase solid solution for the (CaAl,NaSi,KSi)(Fe³⁺,Al³⁺)Si₂O₈-Ca(Fe²⁺,Mg)Si₃O₈ system is proposed and is calibrated by regression analysis based on new and previously reported experimental data of Fe and Mg partitioning between plagioclase and silicate liquid, and reported thermodynamic properties of end members, ternary feldspar and silicate liquid. Using the derived thermodynamic model, FeO^t, MgO content and Mg/(Fe^t+Mg) in plagioclase can be predicted from liquid composition with standard deviations of ǂ.34 wt% (relative error =9%) and ǂ.08 wt% (14%) and ǂ.7 (8%) respectively. Calculated Fe³⁺-Al exchange chemical potentials of plagioclase, m_{Fe^{3 +} ( Al )- 1} ^Pl{\rm \mu }_{{\rm Fe}^{{\rm 3 + }} \left( {{\rm Al}} \right)_{{\rm - 1}} }^{{\rm Pl}} agree with those calculated using reported thermodynamic models for multicomponent spinel, m_{Fe^{3 +} ( Al )- 1} ^Sp{\rm \mu }_{{\rm Fe}^{{\rm 3 + }} \left( {{\rm Al}} \right)_{{\rm - 1}} }^{{\rm Sp}} and clinopyroxene, m_{Fe^{3 +} ( Al )- 1} ^Cpx{\rm \mu }_{{\rm Fe}^{{\rm 3 + }} \left( {{\rm Al}} \right)_{{\rm - 1}} }^{{\rm Cpx}} . The FeO^t content of plagioclase coexisting with spinel or clinopyroxene is affected by Fe³⁺/(Fe³⁺+Al) and Mg/(Fe+Mg) of spinel or clinopyroxene and temperature, while it is independent of the anorthite content of plagioclase. Three oxygen barometers based on the proposed model are investigated. Although the oxygen fugacities predicted by the plagioclase-liquid oxygen barometer are scattered, this study found that plagioclase-spinel-clinopyroxene-oxygen and plagioclase-olivine-oxygen equilibria can be used as practical oxygen barometers. As a petrological application, prediction of plagioclase composition and f_O2 are carried out for the Upper Zone of the Skaergaard intrusion. The estimated oxygen fugacities are well below QFM buffer and consistent with the estimation of oxidization states in previous studies.     

The solubility of calcite in water at 6–16 kbar and 500–800 °C

The solubility of calcite in H₂O was measured at 6–16 kbar, 500–800 °C, using a piston-cylinder apparatus. The solubility was determined by the weight loss of a single crystal and by direct analysis of the quench fluid. Calcite dissolves congruently in the pressure (P) and temperature (T) range of this study. At 10 kbar, calcite solubility increases with increasing temperature from 0.016±0.005 molal at 500 °C to 0.057±0.022 molal at 750 °C. The experiments reveal evidence for hydrous melting of calcite between 750 and 800 °C. Solubilities show only a slight increase with increasing P over the range investigated. Comparison with work at low P demonstrates that the P dependence of calcite solubility is large between 1 and 6 kbar, increasing at 500 °C from 1.8×10^–5 molal at 1 kbar to 6.4×10^–3 molal at 6 kbar. The experimental results are described by:

The effect of crystal orientation on the wetting behaviour of silicate melts on the surfaces of spinel peridotite minerals

. The effect of crystal anisotropy on wetting angles of equilibrium silicate melts on crystal faces of spinel, diopside, enstatite and olivine has been determined experimentally by the sessile melt drop technique. The anisotropy, Ãg_SL{\rm \~A}\gamma _{{\rm SL}} , of solid-liquid interfacial energies (%_SL(max)-%_SL(min)) can be related to the wetting angles, N, by Ãg_SL μ | cosy(max)  - cosy(min) | = Pw_{( [(A)\tilde]gSL )}{\rm \~A}\gamma _{{\rm SL}} \propto \left| {\cos \psi (\max )\; - \cos \psi (\min )} \right| = Pw_{\left( {{\rm \tilde A}\gamma _{{\rm SL}} } \right)} . Normalising to the smallest wetting angle gives values of Pw for diopside=0.0728, olivine=0.0574, orthopyroxene=0.0152, and spinel=0.0075. Crystal anisotropy influences grain-scale morphology of small-degree partial melts, permeability and the melt connectivity threshold, J_C. Results show that, at sufficient melt fractions, diopside should increase permeability in a peridotitic matrix, whereas enstatite should lower it. Despite its low anisotropy, spinel contributes positively to permeability and J_C because of its high surface energies. These results suggest that harzburgitic mineral matrices typical of the subcratonic mantle should impede the movement of low-degree partial melts, whereas melts should flow more easily through spinel lherzolites.     

Reaction textures and P–T conditions of Opx-Crd gneisses from Karimnagar, Andhra Pradesh, India

Summary The Karimnagar granulite terrain is an integral part of the Eastern Dharwar Craton (EDC). It has received much interest because of the only reported granulite facies rocks in the EDC. These granulites contain quartz-free sapphirine-spinel-bearing granulites, kornerupine – bearing granulites, mafic granulites, orthopyroxene-cordierite gneisses, charnockites, amphibolites, dolerite dykes, granite gneisses, quartzites and banded magnetite quartzite. The orthopyroxene-cordierite gneisses occur as enclaves within granite-gneiss in association with banded magnetite quartzites, charnockites and amphibolites. The observed reaction textures, spectacular as they are, have an extraordinary information content within a tiny domain. Coronas, symplectites and resorption textures are of particular interest as they reflect discontinuous or continuous reactions under changing physical conditions. The main mineral assemblages encountered in these gneisses are orthopyroxene – cordierite – biotite – plagioclase – perthite – quartz and garnet – orthopyroxene – cordierite – biotite – quartz – plagioclase – perthite ± sillimanite. Multiphase reaction textures in conjunction with mineral chemical data in the KFMASH system indicate the following reactions: Based on chemographic relationships and petrogenetic grids in the K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH) system, a sequence of prograde (early stage), isothermal decompression (middle stage) and retrograde (late stage) reactions (‘back reactions’ and hydration reactions) are inferred. Relatively lower P–T estimates (0.35 GPa/550–750 °C) obtained from the different geothermobarometers are attributed to late Fe–Mg re-equilibration during cooling. Therefore, the convergence method has been applied to retrieve simultaneously the P–T conditions of the thermal peak of metamorphism. The near thermal peak condition of metamorphism estimated by the convergence method are 850 °C/0.62 GPa. The P–T estimates define a retrograde trajectory with substantial decompression.     

Significance of orthopyroxene and major element constraints on the petrogenesis of Ferrar tholeiites from southern Prince Albert Mountains, Victoria Land, Antarctica

The least evolved Jurassic Ferrar tholeiites from southern Prince Albert Mountains (Antarctica) are characterized by the occurrence of orthopyroxene (opx), a mineralogical feature virtually absent in the tholeiites from the large igneous provinces of Karoo (South Africa) and Paraná (Brazil). Petrography suggests that opx is the early phase in the sequence of crystallization and mineral chemistry indicates that it is in equilibrium with the host rock. In general, MELTS modeling predicts that opx is the liquidus phase in the Ferrar tholeiites with MgO higher than ~7 wt% at P=1.5-5 kbar, H₂O=0-1 wt% and % MathType!MTEF!2!1!+- % feaaeaart1ev0aaatCvAUfKttLearuavTnhis1MBaeXatLxBI9gBae % bbnrfifHhDYfgasaacH8YjY-vipgYlH8Gipec8Eeeu0xXdbba9frFj % 0-OqFfea0dXdd9vqaq-JfrVkFHe9pgea0dXdar-Jb9hs0dXdbPYxe9 % vr0-vr0-vqpWqaaeaabiGaaiaacaqabeaabaqaamaaaOqaaiabdAga % MTWaaSbaaeaacqqGpbWtaeqaaWWaaSbaaeaadaWgaaqaaiabikdaYa % qabaaabeaakiabg2da9iabbgfarjabbAeagjabb2eanjabgkHiTiab % igdaXiaaysW7cyGGSbaBcqGGVbWBcqGGNbWzaaa!381A! = QFM - 1 f_{\rm O} _{_2 } = {\rm QFM} - 1\;\log unit conditions. MELTS results also show that the early crystallization of opx is primarily controlled by high SiO₂ and high SiO₂/CaO, chemical characteristics typical of the Ferrar tholeiites, but not shown by the Karoo and Paraná analogs with similar MgO content. Major element geochemistry of the least evolved Ferrar tholeiite has been modeled through fractional crystallization and fractional crystallization coupled with crustal assimilation processes, starting from natural peridotite-derived experimental melts. Mass balance and MELTS modeling support the argument that theoretical magma compositions suitable to be primary to the least evolved Ferrar tholeiites are compatible with hydrous (H₂O=0.3-0.5 wt%) and anhydrous melts obtained at 10-15 kbar by high melting degrees (>25%) of fertile and depleted spinel lherzolites, respectively, and later contaminated by the high-grade metamorphic rocks from the Victoria Land crystalline basement. The genesis of primary Ferrar tholeiites does not necessarily reflect the generally assumed depleted source mantle being also compatible with a fertile one.     

High temperature calorimetry of sulfide systems

The standard enthalpies of formation of FeS (troilite), FeS₂ (pyrite), Co_0.9342S, Co₃S₄ (linnaeite), Co₉S₈ (cobalt pentlandite), CoS₂ (cattierite), CuS (covellite), and Cu₂S (chalcocite) have been determined by high temperature direct reaction calorimetry at temperatures between 700 K and 1021 K. The following results are reported: $$\Delta {\rm H}_{f,FeS}^{tr} = - 102.59 \pm 0.20kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,FeS}^{py} = - 171.64 \pm 0.93kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_{0.934} S} = - 99.42 \pm 1.52kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_9 S_8 }^{ptl} = - 885.66 \pm 16.83kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_3 S_4 }^{In} = - 347.47 \pm 7.27kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,CoS_2 }^{ct} = - 150.94 \pm 4.85kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Cu_2 S}^{cc} = - 80.21 \pm 1.51kJ mol^{ - 1} ,$$ and $$\Delta {\rm H}_{f,CuS}^{cv} = - 53.14 \pm 2.28kJ mol^{ - 1} ,$$ The enthalpy of formation of CuFeS₂ (chalcopyrite) from (CuS+FeS) and from (Cu+FeS₂) was determined by solution calorimetry in a liquid Ni_0.60S_0.40 melt at 1100 K. The results of these measurements were combined with the standard enthalpies of formation of CuS, FeS, and FeS₂, to calculate the standard enthalpy of formation of CuFeS₂. We found \(\Delta {\rm H}_{f,CuFeS_2 }^{ccp} = - 194.93 \pm 4.84kJ mol^{ - 1}\) . Our results are compared with earlier data given in the literature; generally the agreement is good and our values agree with previous estimates within the uncertainties present in both.     

The mobility of U and Th in subduction zone fluids: an indicator of oxygen fugacity and fluid salinity

The solubility of U and Th in aqueous solutions at P-T-conditions relevant for subduction zones was studied by trapping uraninite or thorite saturated fluids as synthetic fluid inclusions in quartz and analyzing their composition by Laser Ablation-ICPMS. Uranium is virtually insoluble in aqueous fluids at Fe-FeO buffer conditions, whereas its solubility increases both with oxygen fugacity and with salinity to 960 ppm at 26.1 kbar, Re-ReO₂ buffer conditions and 14.1 wt% NaCl in the fluid. At 26.1 kbar and 800°C, uranium solubility can be reproduced by the equation: log\textU = 2.681 + 0.1433logf\textO₂ + 0.594\textCl, \log {\text{U}} = 2.681 + 0.1433\log f{\text{O}}_{2} + 0.594{\text{Cl,}} where fO₂ is the oxygen fugacity, and Cl is the chlorine content of the fluid in molality. In contrast, Th solubility is generally low (<10 ppm) and independent of oxygen fugacity or fluid salinity. The solubility of U and Th in clinopyroxene in equilibrium with uraninite and thorite was found to be in the order of 10 ppm. Calculated fluid/cpx partition coefficients of Th are close to unity for all conditions. In contrast, D^fluid/cpx for uranium increases strongly both with oxygen fugacity and with salinity. We show that reducing or NaCl-free fluids cannot produce primitive arc magmas with U/Th ratio higher than MORB. However, the dissolution of several wt% of oxidized, saline fluids in arc melts can produce U/Th ratios several times higher than in MORB. We suggest that observed U/Th ratios in arc magmas provide tight constraints on both the salinity and the oxidation state of subduction zone fluids.     

Microtextural constraints on the interplay between fluid–rock reactions and deformation

Schists from two mylonitic localities in the footwall of a low-angle normal fault in the eastern Alps record different degrees of embrittlement during exhumation, depending on the extent to which fluid–rock reactions proceeded. At one site, graphitic schists preserve textural evidence for two metamorphic reactions that modified and/or fluid volume: (1) reaction between graphite and aqueous fluid that increased without changing the molar amount of fluid, and (2) replacement of titanite by rutile, calcite, and quartz. The latter reaction involved net consumption of increasingly CO₂-rich fluid. Areas where the first reaction proceeded are associated with abundant Mode I microcracks. Fluid inclusion arrays within the microcracks show that increased from ∼0.1 to 0.6 during decompression from 4.75 to 2 kbar at a reference temperature of 500°C. Titanite consumption is most pronounced within transgranular Mode I microcracks, but microcracks do not crosscut products of this reaction; fluid consumption during reaction was coeval with the end of microcracking, at least on a local scale. At the other site, graphitic schists lack small-scale Mode I cracks as well as evidence for graphite consumption during decompression. SEM imaging shows that graphite is anhedral and pitted at the first site, but occurs in clusters of euhedral grains at the second site. Mass balance calculations demonstrate that rocks with partially consumed graphite were infiltrated by an externally derived, H₂O-rich fluid that drove subsequent graphite-fluid reaction. Evidence for similar fluid infiltration is absent at the second site. Variations in the degree of reaction progress indicate that fluid pathways and deformation style were heterogeneous on the scale of millimeters to kilometers during exhumation from mid-crustal depths.     

Experimental and petrological constraints on local-scale interaction of biotite-amphibole gneiss with H2O-CO2-（K, Na）Cl fluids at middle-crustal conditions： Example from the Limpopo Complex, South Africa

Reaction textures and fluid inclusions in the～2.0 Ga pyroxene-bearing dehydration zones within the Sand River biotite-hornblende orthogneisses（Central Zone of the Limpopo Complex） suggest that the formation of these zones is a result of close interplay between dehydration process along ductile shear zones triggered by H₂O-CO₂-salt fluids at 750—800℃and 5.5—6.2 kbar.partial melting,and later exsolution of residual brine and H₂O-CO₂ fluids during melt crystallization at 650—700℃.These processes caused local variations of water and alkali activity in the fluids,resulting in various mineral assemblages within the dehydration zone.The petrological observations are substantiated by experiments on the interaction of the Sand River gneiss with the H₂O-CO-2-（K,Na）Cl fluids at 750 and 800℃and 5.5 kbar.It follows that the interaction of biotite-amphibole gneiss with H₂O-CO₂-（K.Na）Cl fluids is accompanied by partial melting at 750—800℃.Orthopyroxene-bearing assemblages are characteristic for temperature 800℃and are stable in equilibrium with fluids with low salt concentrations,while salt-rich fluids produce clinopyroxene-bearing assemblages.These observations arc in good agreement with the petrological data on the dehydration zones within the Sand River orthoeneisses.     

Dissolution Kinetics of Dolomite in Water at Elevated Temperatures

Kinetic experiments of dolomite dissolution in water over a temperature range from 25 to 250°C were performed using a flow through packed bed reactor. Authors chose three different size fractions of dolomite samples: 18–35 mesh, 35–60 mesh, and 60–80 mesh. The dissolution rates of the three particle size samples of dolomite were measured. The dissolution rate values are changed with the variation of grain size of the sample. For the sample through 20–40 mesh, both the release rate of Ca and the release rate of Mg increase with increasing temperature until 200°C, then decrease with continued increasing temperature. Its maximum dissolution rate occurs at 200°C. The maximum dissolution rates for the sample through 40–60 mesh and 60–80 mesh happen at 100°C. Experimental results indicate that the dissolution of dolomite is incongruent in most cases. Dissolution of fresh dolomite was non-stoichiometric, the Ca/Mg ratio released to solution was greater than in the bulk solid, and the ratio increases with rising temperatures from 25 to 250°C. Observations on dolomite dissolution in water are presented as three parallel reactions, and each reaction occurs in consecutive steps as

High pressure elasticity and phase transformation in brucite, Mg(OH)2

The first pressure derivatives of the second-order elastic constants have been calculated for brucite, Mg(OH)₂ from the second- and third-order elastic constants. The deformation theory and finite strain elasticity theory have been used to obtain the second- and third-order elastic constants of Mg(OH)₂ from the strain energy of the lattice. The strain energy ϕ is calculated by taking into account the interactions up to third nearest neighbors in the Mg(OH)₂ lattice. ϕ is then compared with the strain dependent lattice energy from continuum model approximation to obtain the expressions of elastic constants. The complete set of six second-order elastic constants C _IJ of brucite exhibits large anisotropy. Since C ₃₃ (= 21.6 GPa), which corresponds to the strength of the material along the c-axis direction, is less than the longitudinal mode C ₁₁ (= 156.7 GPa), the interlayer binding forces are weaker than the binding forces along the basal plane of Mg(OH)₂. The 14 nonvanishing components of the third-order elastic constants, C _IJK , of brucite have been obtained. All the C _IJK of brucite are negative except the values of C ₁₁₄ (= 230.36 GPa), C ₁₂₄ (= 75.45 GPa) and C ₁₃₄ (= 36.98 GPa). The absolute values of the C _IJK are, in general, one order of magnitude greater than the C _IJ ’s in the Mg(OH)₂ system as usually expected for a crystalline material. To our knowledge, no previous data are available to compare the pressure derivatives of brucite. The pressure derivatives of the two components viz., C ₁₄ and C ₃₃ become negative indicating an elastic instability in brucite while under pressure. This may be related to the phase transition of brucite largely involving rearrangements of H atoms revealed in the Raman spectroscopic, powder neutron diffraction and synchrotron X-ray diffraction studies.     

Thermodynamic mixing properties of Mg(Al,Cr)2O4 spinel crystalline solution at high temperatures and pressures

Three Al-Cr exchange isotherms at 1,250°, 1,050°, and 796° between Mg(Al, Cr)₂O₄ spinel and (Al, Cr)₂O₃ corundum crystalline solutions have been studied experimentally at 25 kbar pressure. Starting from gels of suitable bulk compositions, close approach to equilibrium has been demonstrated in each case by time studies. Using the equation of state for (Al, Cr)₂O₃ crystalline solution (Chatterjee et al. 1982a) and assuming that the Mg(Al, Cr)₂O₄ can be treated in terms of the asymmetric Margules relation, the exchange isotherms were solved for Δ G ^*, and . The best constrained data set from the 1,250° C isotherm clearly shows that the latter two quantities do not overlap within three standard deviations, justifying the choice of asymmetric Margules relation for describing the excess mixing properties of Mg(Al, Cr)₂O₄ spinels. Based on these experiments, the following polybaric-polythermal equation of state can be formulated: , P expressed in bars, T in K, G _m ^ex and W _G,i ^Sp in joules/mol. Temperature-dependence of G _m ^ex is best constrained in the range 796–1,250° C; extrapolation beyond that range would have to be done with caution. Such extrapolation to lower temperature shows tentatively that at 1 bar pressure the critical temperature, T _c, of the spinel solvus is 427° C, with dT_c/dP≈1.3 K/kbar. The critical composition, X _c, is 0.42 , and changes barely with pressure. Substantial error in calculated phase diagrams will result if the significant positive deviation from ideality is ignored for Al-Cr mixing in such spinels.     

Amphibole composition in tonalite as a function of pressure: an experimental calibration of the Al-in-hornblende barometer

The Al-in-hornblende barometer, which correlates Al^tot content of magmatic hornblende linearly with crystallization pressure of intrusion (Hammarstrom and Zen 1986), has been calibrated experimentally under water-saturated conditions at pressures of 2.5–13 kbar and temperatures of 700–655°C. Equilibration of the assemblage hornlende-biotite-plagioclase-orthoclasequartz-sphene-Fe-Ti-oxide-melt-vapor from a natural tonalite 15–20° above its wet solidus results in hornblende compositions which can be fit by the equation: P(±0.6 kbar) = –3.01 + 4.76 Al _hbl ^tot r ²=0.99, where Al^tot is the total Al content of hornblende in atoms per formula unit (apfu). Al^tot increase with pressure can be ascribed mainly to a tschermak-exchange ( ) accompanied by minor plagioclase-substitution ( ). This experimental calibration agrees well with empirical field calibrations, wherein pressures are estimated by contact-aureole barometry, confirming that contact-aureole pressures and pressures calculated by the Al-in-hornblende barometer are essentially identical. This calibration is also consistent with the previous experimental calibration by Johnson and Rutherford (1989b) which was accomplished at higher temperatures, stabilizing the required buffer assemblage by use of mixed H₂O-CO₂ fluids. The latter calibration yields higher Al^tot content in hornblendes at corresponding pressures, this can be ascribed to increased edenite-exchange ( ) at elevated temperatures. The comparison of both experimental calibrations shows the important influence of the fluid composition, which affects the solidus temperature, on equilibration of hornblende in the buffering phase assemblage.     

Ephesite,Na(LiAl2) [Al2Si2O10] (OH)2: I. thermal stability and standard state thermodynamic properties

Ephesite, Na(LiAl₂) [Al₂Si₂O₁₀] (OH)₂, has been synthesized for the first time by hydrothermal treatment of a gel of requisite composition at 300≦T(° C)≦700 and \(P_{H_2 O}\) upto 35 kbar. At \(P_{H_2 O}\) between 7 and 35 kbar and above 500° C, only the 2M₁ polytype is obtained. At lower temperatures and pressures, the 1M polytype crystallizes first, which then inverts to the 2M₁ polytype with increasing run duration. The X-ray diffraction patterns of the 1M and 2M₁ poly types can be indexed unambiguously on the basis of the space groups C2 and Cc, respectively. At its upper thermal stability limit, 2M₁ ephesite decomposes according to the reaction (1) $$\begin{gathered} {\text{Na(LiAl}}_{\text{2}} {\text{) [Al}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{{\text{10}}} {\text{] (OH)}}_{\text{2}} \hfill \\ {\text{ephesite}} \hfill \\ {\text{ = Na[AlSiO}}_{\text{4}} {\text{] + LiAl[SiO}}_{\text{4}} {\text{] + }}\alpha {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}} {\text{ + H}}_{\text{2}} {\text{O}} \hfill \\ {\text{nepheline }}\alpha {\text{ - eucryptite corundum}} \hfill \\ \end{gathered}$$ Five reversal brackets for (1) have been established experimentally in the temperature range 590–750° C, at \(P_{H_2 O}\) between 400 and 2500 bars. The equilibrium constant, K, for this reaction may be expressed as (2) $$log K{\text{ = }}log f_{{\text{H}}_{\text{2}} O}^* = 7.5217 - 4388/T + 0.0234 (P - 1)T$$ where \(f_{H_2 O}^* = f_{H_2 O} (P,T)/f_{H_2 O}^0\) (1,T), with T given in degrees K, and P in bars. Combining these experimental data with known thermodynamic properties of the decomposition products in (1), the following standard state (1 bar, 298.15 K) thermodynamic data for ephesite were calculated: H _f,298.15 ⁰ =-6237372 J/mol, S _298.15 ⁰ =300.455 J/K·mol, G _298.15 ⁰ =-5851994 J/mol, and V _298.15 ⁰ =13.1468 J/bar·mol.     

Doppler SODAR observations of the temperature structure parameter during monsoon season over a tropical rural station,Gadanki

Doppler SODAR (Sound Detection and Ranging) measurements over a tropical Indian station at National Atmospheric Research Laboratory (NARL), Gadanki (13.5°N, 79.2°E) during two consecutive monsoon seasons, 2007 and 2008, are investigated to study the influence of mechanically generated turbulence on temperature structure parameter (C_T²)_{\rm T}^{2}) in the convective boundary layer. Increase in the C_T²_{\rm T}^{2} is observed after the arrival of monsoon for both seasons. Contribution of vertical wind shear in horizontal wind component to C_T²_{\rm T}^{2} due to zonal winds is responsible for the increase observed in the temperature structure parameter which is inferred from the results obtained. C_T²_{\rm T}^{2} is found to be increased by an order of 2 in both the lower and upper altitudes, respectively. Magnitude of wind speed is reported to be doubled with the arrival of monsoon. It is also observed that, southwest monsoon wind modulates the day-to-day variations of wind pattern over this station during the onset phase of monsoon season. The lower variability observed at lower height is attributed to the complex topography surrounding this region.