Moon: Central peak heights and crater origins

The heights of central peaks in lunar craters are directly proportional to crater diameters, implying that peak height is a function of crater-forming energy. A similar relationship exists for terrestrial meteorite and TNT craters whose uplifts are of rebound origin. A rebound origin for lunar central peaks implies an impact origin for central peak craters. Correlation of peak heights and crater depths provides direct evidence for lava filling of crater floors.     

Crater size-shape profiles for the moon and mercury: Terrain effects and interplanetary comparisons

New crater size-shape data were compiled for 221 fresh lunar craters and 152 youthful mercurian craters. Terraces and central peaks develop initially in fresh craters on the Moon in the 0–10 km diameter interval. Above a diameter of 65 km all craters are terraced and have central peaks. Swirl floor texture is most common in craters in the size range 20–30 km, but it occurs less frequently as terraces become a dominant feature of crater interiors. For the Moon there is a correlation between crater shape and geomorphic terrain type. For example, craters on the maria are more complex in terms of central peak and terrace detail at any given crater diameter than are craters in the highlands. These crater data suggest that there are significant differences in substrate and/or target properties between maria and highlands. Size-shape profiles for Mercury show that central peak and terrace onset is in the 10–20 km diameter interval; all craters are terraced at 65 km, and all have central peaks at 45 km. The crater data for Mercury show no clear cut terrain correlation. Comparison of lunar and mercurian data indicates that both central peaks and terraces are more abundant in craters in the diameter range 5–75 km on Mercury. Differences in crater shape between Mercury and the Moon may be due to differences in planetary gravitational acceleration (gMercury=2.3gMoon). Also differences between Mercury and the Moon in target and substrate and in modal impact velocity may contribute to affect crater shape.     

Olivine-rich exposures in the South Pole-Aitken Basin

The distribution and the geological context of the olivine-rich exposures in the South Pole-Aitken (SPA) Basin on the Moon were investigated based on the spectral data obtained from the Spectral Profiler (SP) and Multiband Imager (MI) onboard the Japanese lunar explorer Kaguya/SELENE. The olivine-rich exposures are found only in the peak rings or central peaks of the Schrödinger basin and Zeeman crater, which are located in the outer region of the SPA Basin and not in the center region. On a localized scale, the olivine-rich materials are exposed on landslide features on the crater walls or sloped wall of the central peaks or the peak rings. Another observational finding is the co-existence of olivine-rich and plagioclase-rich materials on a kilometer scale spanning most of the olivine-rich sites in the Schrödinger basin. Pyroxene-rich materials are found in fresh craters outside the peak rings or the central peaks with olivine-rich materials. Based on these results, the following scenario are proposed: (1) the impact to form the SPA Basin melted a large amount of the lunar upper mantle and crust, and distributed the melted materials to the outer region; (2) local differentiation of melted materials hid the olivine-rich materials in the center region of the SPA Basin; (3) later impacts that formed the Schrödinger and Zeeman craters excavated and exposed the olivine-rich materials to the surface again; and (4) space weathering and regolith gardening obscured the olivine-rich spectra at the exposure sites, but recent, small scale impacts or landslides on the sloped wall exposed fresh olivine-rich materials, allowing the identification of the olivine-rich exposures by spectral remote-sensing. This suggests that several, different scale events play an important role in forming the surface distributions of originally deep-seated materials on the Moon, as well as on other planetary bodies.     

The development of central peaks in lunar craters

From a consideration of equations describing the supersonic impact of a solid body on to a solid target, the difference between final crater depth and distance vertically below the original impact at which the rarefaction wave front, resulting from the reflection of the backward propagating shock wave in the meteorite, first intersects the forward travelling shock wave front in the target has been determined. A correlation between this difference and the height of central peak features in the majority of fresh lunar craters has been established. On the basis of this, it is proposed that the intersection of these two wave fronts locally inhibits the ejection of material from behind the shock front during the excavation phase of crater formation, leading to the appearance of a centrally located peak of uplifted material. Subsequent post-impact development of the interior morphological features has been shown to be consistent with the size-scale of development of complex crater features on the lunar and other planetary surfaces. By considering only craters which exhibit this correlation, a scaling between peak height and impact energy has been derived.     

Lofted charged dust distribution above the Moon surface

We developed kinetic theory for the charging processes of small dust grains near the lunar surface due to interaction with the anisotropic solar wind plasma. Once charged, these dust grains, which are exposed to the electric field in the sheath region near the lunar surface, could loft and distribute around such heights off the surface where they reach equilibrium with the local gravitational force. Analytical solutions were derived for the charging time, grain floating potential, and grain charge, characterizing the charging processes of small dust grains in a two-component and in a multi-component solar wind plasma, and further highlighting the unique features presented by the high streaming plasma velocity. We have also formulated a novel kinetic theory of sheath formation around an absorbing planar surface immersed in the anisotropic solar wind plasma in the case of a negligible photoelectric effect and presented solutions for the sheath structure. In this study we combined the results from these analyses and provided estimates for the size distribution function of dust that is expected to be lofted in regions dominated by the solar wind plasma, such as near the terminator and in nearby shadowed craters. Corresponding to the two dominant streaming velocity peaks of 300 and 800 km/s, mean dust diameters of 500 and 350 nm, respectively, are expected to be found at equilibrium at heights of relevance to exploration operations, e.g., around 1.5 m height off the lunar surface. In shadowed craters near the terminator region, where isotropic plasma should be dominating, we estimate mean lofted dust diameter of 800 nm around the same 1.5 m height off the lunar surface. The generally applicable solutions could be used to readily calculate the expected lofted size distribution near the lunar surface as a function of plasma parameters, dust grain composition, and other parameters of interest.     

The effect of target properties on crater morphology: Comparison of central peak craters on the Moon and Ganymede

Abstract— We examine the morphology of central peak craters on the Moon and Ganymede in order to investigate differences in the near‐surface properties of these bodies. We have extracted topographic profiles across craters on Ganymede using Galileo images, and use these data to compile scaling trends. Comparisons between lunar and Ganymede craters show that crater depth, wall slope and amount of central uplift are all affected by material properties. We observe no major differences between similar‐sized craters in the dark and bright terrain of Ganymede, suggesting that dark terrain does not contain enough silicate material to significantly increase the strength of the surface ice. Below crater diameters of ?12 km, central peak craters on Ganymede and simple craters on the Moon have similar rim heights, indicating comparable amounts of rim collapse. This suggests that the formation of central peaks at smaller crater diameters on Ganymede than the Moon is dominated by enhanced central floor uplift rather than rim collapse. Crater wall slope trends are similar on the Moon and Ganymede, indicating that there is a similar trend in material weakening with increasing crater size, and possibly that the mechanism of weakening during impact is analogous in icy and rocky targets. We have run a suite of numerical models to simulate the formation of central peak craters on Ganymede and the Moon. Our modeling shows that the same styles of strength model can be applied to ice and rock, and that the strength model parameters do not differ significantly between materials.     

Floor-fractured lunar craters

Numerous lunar craters (206 examples, mean diameter = 40km) contain pronounced floor rilles (fractures) and evidence for volcanic processes. Seven morphologic classes have been defined according to floor depth and the appearance of the floor, wall, and rim zones. Such craters containing central peaks exhibit peak heights (approximately 1km) comparable to those within well-preserved impact craters but exhibit smaller rim-peak elevation differences (generally 0–1.5km) than those (2.4km) within impact craters. In addition, the morphology, spatial distribution, and floor elevation data reveal a probable genetic association with the maria and suggest that a large number of floor-fractured craters represent pre-mare impact craters whose floors have been lifted tectonically and modified volcanically during the epochs of mare flooding. Floor uplift is envisioned as floating on an intruded sill, and estimates of the buoyed floor thickness are consistent with the inferred depth of brecciation beneath impact craters, a zone interpreted as a trap for the intruding magma. The derived model of crater modification accounts for (1) the large differences in affected crater size and age; (2) the small peak-rim elevation differences; (3) remnant central peaks within mare-flooded craters and ringed plains; (4) ridged and flat-topped rim profiles of heavily modified craters and ringed plains; and (5) the absence of positive gravity anomalies in most floor-fractured craters and some large mare-filled craters. One of the seven morphologic classes, however, displays a significantly smaller mean size, larger distances from the maria, and distinctive morphology relative to the other six classes. The distinctive morphology is attributed, in part, to the relatively small size of the affected crater, but certain members of this class represent a style of volcanism unrelated to the maria - perhaps triggered by the last major basin-forming impacts.     

Comparison of the crater morphology-size relationship for Mars,Moon, and Mercury

New central peak-crater size data for Mars shows that a higher percentage of relatively unmodified Martian craters have central peaks than do fresh lunar craters below a diameter of 30 km. For example, in the diameter range 10 to 20 km, 60% of studied Martian craters have central peaks compared to 26% for the Moon. Gault et al. (1975, J. Geophys. Res.80, 2444–2460) have demonstrated that central peaks occur in smaller craters on Mercury than on the Moon, and that this effect is due to the different gravity fields in which the craters formed. Similar differences when comparing Mars and the Moon show that gravity has affected the diameter at which central peaks form on Mars. Erosion on Mars, therefore, does not completely mask differences in crater interior structure that are caused by differences in gravity. Effects of Mars' higher surface gravity when compared to the Moon are not detected when comparing terrace and crater shape data. The morphology-crater size statistics also show that a full range of crater shapes occur on Mars, and craters tend to become more morphologically complex with increasing diameter. Comparisons of Martian and Mercurian crater data show differences which may be related to the greater efficacy of erosion on Mars.     

Microimpact phenomena on Australasian microtektites: Implications for ejecta plume characteristics and lunar surface processes

Abstract— Detailed investigations of the microimpact phenomena on Australasian microtektites from four samples from the Central Indian Basin reveal an array of features, such as very low-velocity captured droplets, welded projectiles, angular fragments and dust, craters generated by projectiles defining an oblique trajectory, high-velocity “pitless” craters, and the conventional hypervelocity craters with well-defined central pits and radial and concentric cracks—found commonly on lunar surface materials. The microimpacts are a consequence of interparticle collisions within the ejecta plume (as suggested by their chemistry) subsequent to a major impact and, therefore, reveal processes inherent in an impact-generated plume. All the impact phenomena observed here have taken place while the targets and projectiles were in flight and are therefore secondary impacts in lunar terms. However, some of the resultant features are analogous to lunar micro-craters attributed to primary impacts by cosmic dust. Therefore, ballistic sedimentation on the Moon is likely to contain plume collisional debris as well.     

Simultaneous impact and lunar craters

The existence of large terrestrial impact crater doublets and Martian crater doublets that have been inferred to be impact craters demonstrates that simultaneous impact of two or more bodies occurs at nearly the same point on planetary surfaces. An experimental study of simultaneous impact of two projectiles near one another shows that doublet craters with ridges perpendicular to the bilateral axis of symmetry result when separation between impact points relative to individual crater diameter is large. When separation is progressively less, elliptical craters with central ridges and central peaks, circular craters with flat floors containing ridges and peaks, and circular craters with deep round bottoms are produced. These craters are similar in structure to many of the large lunar craters. Results suggest that the simultaneous impact of meteoroids near one another may be an important mechanism for the production of central peaks in large lunar craters.     

Scaling impact melting and crater dimensions: Implications for the lunar cratering record

Abstract— The dimensions of large craters formed by impact are controlled to a large extent by gravity, whereas the volume of impact melt created during the same event is essentially independent of gravity. This “differential scaling” fosters size-dependent changes in the dynamics of impact-crater and basin formation as well as in the final morphologies of the resulting structures. A variety of such effects can be observed in the lunar cratering record, and some predictions can be made on the basis of calculations of impact melting and crater dimensions. Among them are the following: (1) as event magnitude increases, the volume of melt created relative to that of the crater will grow, and more will be retained inside the rim of the crater or basin. (2) The depth of melting will exceed the depth of excavation at diameters that essentially coincide with both the inflection in the depth-diameter trend and the simple-to-complex transition. (3) The volume of melt will exceed that of the transient cavity at a cavity diameter on the order of the diameter of the Moon; this would arguably correspond to a Moon-melting event. (4) Small lunar craters only rarely display exterior flows of impact melt because the relatively small volumes of melt created can become choked with clasts, increasing the melt's viscosity and chilling it rapidly. Larger craters and basins should suffer little from such a process. (5) Deep melting near the projectile's axis of penetration during larger events will yield a progression in central-structure morphology; with growing event magnitude, this sequence should range from single peaks through multiple peaks to peak rings. (6) The minimum depth of origin of central-peak material should coincide with the maximum depth of melting; the main central peak in a crater the size of Tycho should have had a preimpact depth of close to 15 km.     

Evidence for isostasy in the lunar mascon Maria

The pronounced positive gravity anomalies in the lunar circular maria imply lack of isostatic compensation of the lunar mascons. This lack of isostasy is hard to reconcile with the rheological properties of the lunar crust. Analysis of the negative ring anomalies that appear to surround the major positive gravity peaks indicates that associated with each mascon is a mass deficit of approximately the same size. In view of the lunar rheology these mass deficits most probably represent compensating mass deficits beneath the lunar mascon maria. Consequently, most lunar mascons appear to be near isostatic equilibrium, and the observed gravity anomalies may be essentially the superposition of positive gravity peaks due to the basaltic mare fill, and less pronounced, broader gravity lows due to the compensating mass deficits at depth.     

Ganymede crater dimensions – Implications for central peak and central pit formation and development

The morphology of impact craters on the icy Galilean satellites differs from craters on rocky bodies. The differences are thought due to the relative weakness of ice and the possible presence of sub-surface water layers. Digital elevation models constructed from Galileo images were used to measure a range of dimensions of craters on the dark and bright terrains of Ganymede. Measurements were made from multiple profiles across each crater, so that natural variation in crater dimensions could be assessed and averaged scaling trends constructed. The additional depth, slope and volume information reported in this work has enabled study of central peak formation and development, and allowed a quantitative assessment of the various theories for central pit formation. We note a possible difference in the size-morphology progression between small craters on icy and silicate bodies, where central peaks occur in small craters before there is any slumping of the crater rim, which is the opposite to the observed sequence on the Moon. Conversely, our crater dimension analyses suggest that the size-morphology progression of large lunar craters from central peak to peak-ring is mirrored on Ganymede, but that the peak-ring is subsequently modified to a central pit morphology. Pit formation may occur via the collapse of surface material into a void left by the gradual release of impact-induced volatiles or the drainage of impact melt into sub-crater fractures.     

Floor-fractured crater models of the Sudbury Structure,Canada: Implications for initial crater size and crater modification

Abstract The pattern of radial and concentric offset dikes at Sudbury strongly resembles fracture patterns in certain volcanically modified craters on the Moon. Since the Sudbury dikes apparently formed shortly after the impact event, this resemblance suggests that early endogenic modification at Sudbury was comparable to deformation in lunar floor-fractured craters. Although regional deformation has obscured many details of the Sudbury Structure, such a comparison of Sudbury with lunar floor-fractured craters provides two alternative models for the original size and surface structures of the Sudbury basin. First, the Sudbury date pattern can be correlated with fractures in the central peak crater Haldane (36 km in diameter). This comparison indicates an initial Sudbury diameter of between 100 and 140 km but requires loss of a central peak complex for which there is little evidence. Alternatively, comparison of the Sudbury dikes with fractures in the two-ring basin Schrödinger indicates an initial Sudbury diameter of at least ～ 180 km, which is in agreement with other recent estimates for the size of the Sudbury Structure. In addition to constraining the size and structure of the original Sudbury crater, these comparisons also suggest that crater modification may reflect different deformation mechanisms at different sizes. Most lunar floor-fractured craters are attributed to deformation over a shallow, crater-centered intrusion; however, there is no evidence for such an intrusion at Sudbury. Instead, melts from the evolving impact melt sheet probably entered fractures formed by isostatically-induced flexure of the crater floor. Since most of the lunar floor-fractured craters are too small (<100-km diameter) to induce significant isostatic adjustment, crater modification by isostatic uplift apparently is limited to only the largest of craters, whereas deformation over igneous intrusions dominates the modification of smaller craters.     

Lunar soil grain size distribution

A comprehensive review has been made of the currently available data for lunar grain size distributions. It has been concluded that there is little or no statistical difference among the large majority of the soil samples from the Apollo 11, 12, 14, and 15 missions. The grain size distribution for these soils has reached a steady state in which the comminution processes are balanced by the aggregation processes. The median particle size for the steady-state soil is 40 to 130 µm. The predictions of lunar grain size distributions based on the Surveyor television photographs have been found to be quantitatively in error and qualitatively misleading.     

Formation of lunar basin rings

The origin of the multiple concentric rings that characterize lunar impact basins, and the probable depth and diameter of the transient crater have been widely debated. As an alternative to prevailing “megaterrace” hypotheses, we propose that the outer scarps or mountain rings that delineate the topographic rims of basins—the Cordilleran at Orientale, the Apennine at Imbrium, and the Altai at Nectaris—define the transient cavities, enlarged relatively little by slumping, and thus are analogous to the rim crests of craters like Copernicus; inner rings are uplifted rims of craters nested within the transient cavity. The magnitude of slumping that occurs on all scarps is insufficient to produce major inner rings from the outer. These conclusions are based largely on the observed gradational sequence in lunar central uplifts:. from simple peaks through somewhat annular clusters of peaks, peak and ring combinations and double ring basins, culminating in multiring structures that may also include peaks. In contrast, belts of slump terraces are not gradational with inner rings. Terrestrial analogs suggest two possible mechanisms for producing rings. In some cases, peaks may expand into rings as material is ejected from their cores, as apparently occurred at Gosses Bluff, Australia. A second process, differential excavation of lithologically diverse layers, has produced nested experimental craters and is, we suspect, instrumental in the formation of terrestrial ringed impact craters. Peak expansion could produce double-ring structures in homogeneous materials, but differential excavation is probably required to produce multiring and peak-in-ring configurations in large lunar impact structures. Our interpretation of the representative lunar multiring basin Orientale is consistent with formation of three rings in three layers detected seismically in part of the Moon—the Cordillera (basin-bounding) ring in the upper crust, the composite Montes Rook ring in the underlying, more coherent “heald” crust, and an innermost, 320-km ring at the crust-mantle interface. Depth-diameter ratios of $\text{1}\text{10}\text{to}\text{1}\text{15}$ are consistent with this interpretation and suggest that volumes of transient cavities and hence of basin ejecta may be considerably greater than commonly assumed.     

The scientific rationale for the C1XS X-ray spectrometer on India's Chandrayaan-1 mission to the moon

The UK-built Chandrayaan-1 X-ray Spectrometer (C1XS) will fly as an ESA instrument on India's Chandrayaan-1 mission to the Moon, launched in October 2008. C1XS builds on experience gained with the earlier D-CIXS instrument on SMART-1, but will be a scientifically much more capable instrument. Here we describe the scientific objectives of this instrument, which include mapping the abundances of the major rock-forming elements (principally Mg, Al, Si, Ti, Ca and Fe) in the lunar crust. These data will aid in determining whether regional compositional differences (e.g., the Mg/Fe ratio) are consistent with models of lunar crustal evolution. C1XS data will also permit geochemical studies of smaller scale features, such as the ejecta blankets and central peaks of large impact craters, and individual lava flows and pyroclastic deposits. These objectives all bear on important, and currently unresolved, questions in lunar science, including the structure and evolution of any primordial magma ocean, as revealed by vertical and lateral geochemical variations in the crust, and the composition of the lunar mantle, which will further constrain theories of the Moon's origin, thermal history and internal structure.     

Chang’E-1 gamma ray spectrometer and preliminary radioactive results on the lunar surface

The Chang’E-1(CE-1) spacecraft took a gamma-ray spectrometer (hereafter, CGRS) to detect the element distributions on the lunar surface in a circular, 200 km altitude, polar orbit with approximately 2 h periodicity. CGRS consists of two large CsI(Tl) crystals as the main and anticoincidence detectors. The large CsI crystal of CGRS has a higher detector effective area than other lunar gamma ray spectrometers. For its 1-year mission, gamma ray spectra including many peaks of major elements and trace elements on the lunar surface have been measured by CGRS. Global measurement within 0.55-0.75 MeV is given here to describe the distribution of radioactive composition (e.g., uranium and thorium) on the lunar surface. Although CGRS has a lower energy resolution that cannot separate the uranium peak from others in this energy region, 609 keV uranium gamma ray line dominates the shape of the spectrum in this energy region. Therefore, the radioactive map can indirectly describe the uranium distribution on the lunar surface. The radioactive map shows that the higher radiation is concentrated in the Procellarum KREEP Terrene (PKT) on the nearside with an oval shape. The secondary high-radiation is located in South Pole-Aitken (SPA) basin. Lunar highlands have lower concentration. The relationship between radiation and topography displays different linear correlations for lunar highlands and SPA basin, which imply the different processes for these two regions.     

Near-infrared spectroscopy of probable impact melt from three large lunar highland craters

The composition of small areas within three large lunar highland craters are compared using near-infrared, Earth-based telescopic data. Spectra from many areas in the walls and central peaks of the craters indicate the presence of crystalline components which include olivine, two types of pyroxene, and sometimes Fe-bearing feldspar. Spectra from other regions suspected of being impact melt deposits, located on the floors and walls of the three craters, have remarkably similar, yet anomalous features. These features are interpreted to indicate the presence of pyroxene, Fe-bearing glass, and Fe-bearing feldspar. Pyroxene and feldspar are believed to occur primarily in the form of lithic clasts and rapidly recrystallized impact melt. The Fe-bearing glass is interpreted as impact melt glass.     

Mineralogy and geochemistry of four lunar soils by laser-Raman study

Laser Raman spectroscopy is used to investigate four lunar soils, focusing on mineralogy of grains of <45 μm size. Apollo samples 14163, 15271, 67511, and 71501 were selected as endmembers to study, based on their soil chemistry, maturity, and sample locations. Typical Raman spectral features for major and minor lunar minerals are discussed on the basis of major vibrational modes. We used the Raman peak shift to calculate Mg/(Mg + Fe + Ca) and Ca/(Mg + Fe + Ca) for pyroxene and Mg/(Mg + Fe) for olivine, and thus obtained the compositional distributions of these two minerals in each of the four lunar soils. Classification of feldspar grains was made based on recognition of their Raman patterns. A Raman point-counting procedure was applied to derive mineral modes of the soils, and these are found to be consistent with published modal analysis of these soils. The compositional distributions of pyroxene and olivine grains in each soil sample, as well as the mineral modes, reflect characteristics of the main source materials for these soils. Raman patterns and peak positions also reflect shock effects on plagioclase and quartz, found in 14163.