The problem of inherited Ar* in dating impact glass by the Ar/Ar method: Evidence from the Tswaing impact crater (South Africa)

The Tswaing meteorite impact crater is a 1.13 km diameter structure located in the 2.05 Ga Nebo granite of the Bushveld Complex. The impact age had previously been determined by fission track dating to 220 ± 104 ka. ⁴⁰Ar/³⁹Ar step-heating and total fusion experiments performed on single- and multi-grain impact glass aliquots gave apparent ages ranging from 1.0 ± 0.3 Ma to 204 ± 6 Ma. These “ages” indicate that the radiogenic Ar derived from the target rocks has not been completely degassed as a result of the impact process, despite fusion of the target material. Results of step-heating experiments imply that the trapped within the glass is located in two distinct reservoirs thought to be the glass matrix and fluid/vapor inclusions (or un-melted residual clasts). Calculations assuming an age of 0.2 ± 0.1 Ma for Tswaing (fission track data) reveal that the amount of inherited ⁴⁰Ar*() relative to the pre-impact concentration varies from 0.015% to 4.15%. The spread defined by likely reflects the various quench rates experienced by the glass, most certainly due to the pre-impact position of the sample relative to the center of the crater. We compare the influence of on the apparent ⁴⁰Ar/³⁹Ar age determination of five impact structures. Our calculations show that the main characteristic controlling the age offset (for a given proportion of ) is the age difference between the impact and the target rocks (i.e., the ⁴⁰Ar* concentration in the target rock). The buffer effect for a given crater structure can be predicted knowing the age of the basement and having a rough estimation of the age of the crater structure itself. The occurrence of is likely influenced by (1) the degree of polymerization (i.e., silicate structure complexity) of the target rock and presumably related to the diffusivity of Ar in the melt and glass, (2) the Ar partial pressure at the grain boundary, (3) the quantity of energy involved in the impact, and (4) the porosity of the target rocks. For glass that inevitably suffers inherited and/or excess ⁴⁰Ar*, the use of the inverse isochron technique can be appropriate but should be applied with careful statistical treatment.     

~(40)Ar/~(39)Ar热年代学现状与问题

Ar同位素体系定年矿物的封闭温度范围广,并且可以获得650℃～150℃温度段的非线性冷却历史,因此~(40)Ar/~(39)Ar热年代学成为研究地质体热演化历史过程中最有效的工具之一。但是由于矿物中Ar同位素扩散机制还有一些问题没有清楚地被认识,因此在一定程度上制约了~(40)Ar/~(39)Ar热年代学的发展。本文介绍了目前应用最广泛的两种~(40)Ar/~(39)Ar热年代学模式:多重扩散域模式和多路径扩散模式,讨论了它们的发展现状、存在的问题、可能解决的方法以及今后的发展方向。     

Geochemistry and petrography of impact breccias and target rocks from the 145 Ma Morokweng impact structure, South Africa

Morokweng is a large, 145 Ma impact structure in the Northwest Province of South Africa. The impact origin of this structure and its melt rock has been confirmed by ample evidence of shock metamorphism in clasts within the melt rock and samples from granitoid basement below the melt body. The age of this structure is indistinguishable from the biostratigraphic age of the Jurassic-Cretaceous (J-K) boundary. The size of Morokweng, for which diameters ranging from 70 to 165 kilometers have been quoted before, and which has important implications regarding its relation to the J-K boundary, remains an open question.Here we present new results of a detailed petrographic and chemical investigation of impact melt rock and country rock samples. The granophyric melt rock is mostly unaltered and contains a large number of gabbroic and felsic clasts. The occurrence of baddeleyite, formed from high-temperature dissociation of primary zircon, indicates a high-temperature origin. The impact melt rock body, which in the cores investigated here has a thickness of at least 120 m, shows no statistically significant variation or trend in chemical composition with depth or geographic location. Chemical data for impact melt rock, breccia dike/vein breccia samples, granite, quartzite, and basic to mafic clasts were used in harmonic least squares mixing calculations to determine the source rock types and their proportions involved in the formation of the impact melt rock. Granite is the dominant target rock component (50 to 63% by weight; depending on target composition input to the mixing models), with significant (35 to 50%) mafic contributions, and a (possible) minor contribution of quartzite. New platinum group element (Ru, Rh, Pd, Os, Ir, and Pt), Re, and Au data, as well as data for other siderophile elements (Cr, Co, Ni, and Ir), confirm the presence of up to ∼ 5% of a chondritic component in the melt rock. The indigenous contribution of the PGEs from the target rocks is negligible. Normalized PGE abundance patterns and interelement ratios of Morokweng impact melt rock indicate that the projectile was likely of ordinary chondritic (possibly L chondrite) composition, but the choice of the meteoritic compositional data influences this interpretation.     

秦岭造山带的差异隆升特征--花岗岩40Ar/39Ar年代学研究的证据

分别出露于东、西秦岭的曹坪和沙河湾岩体、老君山和秦岭梁岩体 ,是秦岭全面碰撞后于三叠纪末 (T3 )侵入的花岗岩体 ,其冷却历史记录了秦岭陆内造山阶段的初期隆升过程。通过对角闪石、黑云母和钾长石的40 Ar/ 3 9Ar年龄测定 ,以及对钾长石40 Ar/ 3 9Ar年龄谱进行的多重扩散域模拟计算 ,发现东、西秦岭经历了完全不同的冷却历史 :从晚三叠世末至早侏罗世 ,东、西秦岭同时由 5 0 0℃开始快速冷却 ,之后东秦岭经过一个短暂的稳定期 (约 2 0Ma)后又持续快速冷却 ,至中侏罗世末即已通过 15 0℃等温线 (约地表下 3～ 5km) ;而西秦岭在早侏罗世至晚白垩世初的近 10 0Ma中一直处于稳定平缓的状态 ,至晚白垩世中期才快速冷却至 15 0℃。这种不同的冷却历史可能反映了东、西秦岭的差异隆升过程。     

Mesozoic exhumation of the southern Cape, South Africa, quantified using apatite fission track thermochronology

Southern Africa's topography is distinctive. An inland plateau of low relief and high average elevation is separated from a coastal plane of high relief and low average elevation by a steeply dipping escarpment. The origin and evolution of this topography is poorly understood because, unlike high plateaus elsewhere, its development cannot be easily linked to present day compressional plate boundary processes. Understanding the development of this regional landscape since the break-up of Gondwana is a first order step towards resolving regional epeirogenesis. We present data that quantifies the timing and extent of exhumation across the southern Cape escarpment and coastal plane, using apatite fission track analysis (AFTA) of 25 outcrop samples and 31 samples from three deep boreholes (KW1/67, SA1/66, CR1/68). Outcrop fission track (AFT) ages are Cretaceous and are significantly younger than the stratigraphic ages of their host rocks, indicating that the samples have experienced elevated paleotemperatures. Mean track lengths vary from 11.86 to 14.23 μm. The lack of Cenozoic apatite ages suggests that major cooling was over by the end Cretaceous. The results for three boreholes, situated seaward (south) of the escarpment, indicate an episode of increased denudation in the mid-late Cretaceous (100–80 Ma). An earlier episode of increased denudation (140–120 Ma) is identified from a borehole north of the escarpment. Thermal modelling indicates a history involving 2.5–3.5 km of denudation in the mid-late Cretaceous (100–80 Ma) at a rate of 175 to 125 m/Ma. The AFT data suggest that less than 1 km of overburden has been eroded regionally since the late Cretaceous (< 80 Ma) at a rate of 10 to 15 m/Ma, but do not discount the possibility of minor (in relative amplitude) episodes of uplift and river incision through the Cenozoic. The reasons for rapid denudation in these early and mid-Cretaceous episodes are less clear, but may be related to epeirogenic uplift associated with an increase in mantle buoyancy as reflected in two punctuated episodes of alkaline intrusions (e.g. kimberlites) across southern Africa and contemporaneous formation of two large mafic igneous provinces (~ 130 and 90 Ma) flanking its continental margins. Because Cenozoic denudation rates are relatively minimal, epeirogenic uplift of southern Africa and its distinct topography cannot be primarily related to Cenozoic mantle processes, consistent with the lack of any significant igneous activity across this region during that time.     

Differential unroofing within the central metasedimentary Belt of the Grenville Orogen: constraints from 40Ar/39Ar thermochronology

An ⁴⁰Ar/³⁹Ar thermochronological investigation of upper greenschist to granulite facies gneiss, amphibolite and marble was conducted in the Central Metasedimentary Belt (CMB), Ontario, to constrain its cooling history. Incremental ⁴⁰Ar/³⁹Ar release spectra indicate that substantial differential unroofing occurred in the CMB between 1000 and 600 Ma. A consistent pattern of significantly older hornblende and phlogopite ⁴⁰Ar/³Ar cooling ages on the southeast sides of major northeast striking shear zones is interpreted to reflect late displacement due to extensional deformation. Variations in hornblende ⁴⁰Ar/³⁹Ar age plateaus exceeding 200 Ma occur over distances less than 50 km with major age discontinuities occurring across the Robertson Lake shear zone and the Sharbot Lake mylonite zone which separate the Sharbot Lake terrane from the Elzevir and Frontenac terranes. Extensional displacements of up to 14 km are inferred between the Frontenac and Elzevir terranes of the CMB. No evidence for significant post argon-closure vertical displacement is indicated in the vicinity of the Perth Road mylonite within the Frontenac terrane. Variations of nearly 100 Ma in phlogopite ⁴⁰Ar/³⁹Ar plateau ages occur in undeformed marble on either side of the Bancroft Shear Zone. Phlogopites from sheared and mylonitized marble within the shear zone yield ⁴⁰Ar/³⁹Ar diffusional loss profiles, but have older geologically meaningless ages thought to reflect incorporation of excess argon. By 900 Ma, southeast directed extension was occurring throughout the CMB, possibly initiated along previous zones of compressional shearing. An easterly migration of active zones of extension is inferred, possibly related to an earlier, overall easterly migration of active zones of regional thrusting and easterly migration of an ancient subduction zone. The duration of extensional shearing is not well constrained, but must have ceased before 600 Ma as required by the deposition of overlying undeformed Cambrian and/or Ordovician sedimentary rocks.Contribution No. 481 from the Mineralogical Laboratory, University of Michigan     

Determining cooling rates from mica 40Ar/39Ar thermochronology data: Effect of cooling path shape

Tectonic models are commonly underpinned by metamorphic cooling rates derived from diffusive‐loss thermochronology data. Such cooling ages are usually linked to temperature via Dodson's closure temperature (T_C) formulation, which specifies a 1/time‐shaped cooling path (Contributions to Mineralogy and Petrology, 1973, 40, 259). Geologists, however, commonly discuss cooling rates as a linear temperature/time shape. We present the results of a series of simple finite‐difference diffusion models for Ar diffusion in muscovite and biotite that show that the difference in recorded age between 1/t and linear cooling paths increases significantly with hotter starting temperatures, slower cooling rates and smaller grain sizes. Our results show that it is essential to constrain the cooling path shape in order to make meaningful interpretations of the measured data.     

Rapid cooling of the Yanshan Belt,northern China: Constraints from 40Ar/39Ar thermochronology and implications for cratonic lithospheric thinning

The Yanshan Orogenic Belt is located in the northern part of the North China Craton (NCC), which lost ∼120 km of lithospheric mantle during Phanerozoic tectonic reactivation. Mesozoic magmatism in the Yanshan fold-and-thrust belt began at 195–185 Ma (Early Jurassic), with most of the granitic plutons being Cretaceous in age (138–113 Ma). Along with this magmatism, multi-phase deformational structures, including multiple generations of folds, thrust and reverse faults, extensional faults, and strike-slip faults are present in this belt. Previous investigations have mostly focused on geochemical and isotopic studies of these magmatic rocks, but not on the thermal history of the Mesozoic plutons. We have applied ⁴⁰Ar/³⁹Ar thermochronology to biotites and K-feldspars from several Lower Cretaceous granitic plutons to decipher the cooling and uplift history of the Yanshan region. The biotite ⁴⁰Ar/³⁹Ar ages of these plutons range from 107 to 123 Ma, indicating that they cooled through about 350 °C at that time. All the K-feldspar step-heating results modeled using multiple diffusion domain theory yield similarly rapid cooling trends, although beginning at different times. Two rapid cooling phases have been identified at ca. 120–105 and 100–90 Ma. The first phase of rapid cooling occurred synchronously with widespread extensional deformation characterized by the formation of metamorphic core complexes, A-type magmatism, large-scale normal faults, and the development of half-graben basins. This suggests rapid exhumation took place in an extensional regime and was a shallow-crustal-level response to lithospheric thinning of the NCC. The second phase of rapid cooling was probably related to the regional uplift and unroofing of the Yanshan Belt, which is consistent with the lack of Upper Cretaceous sediments in most of the Yanshan region.     

Ar/Ar thermochronology of the Kampa Dome, southern Tibet: Implications for tectonic evolution of the North Himalayan gneiss domes

Structural and thermochronological studies of the Kampa Dome provide constraints on timing and mechanisms of gneiss dome formation in southern Tibet. The core of Kampa Dome contains the Kampa Granite, a Cambrian orthogneiss that was deformed under high temperature (sub-solidus) conditions during Himalayan orogenesis. The Kampa Granite is intruded by syn-tectonic leucogranite dikes and sills of probable Oligocene to Miocene age. Overlying Paleozoic to Mesozoic metasedimentary rocks decrease in peak metamorphic grade from kyanite + staurolite grade at the base of the sequence to unmetamorphosed at the top. The Kampa Shear Zone traverses the Kampa Granite — metasediment contact and contains evidence for high-temperature to low-temperature ductile deformation and brittle faulting. The shear zone is interpreted to represent an exhumed portion of the South Tibetan Detachment System. Biotite and muscovite ⁴⁰Ar/³⁹Ar thermochronology from the metasedimentary sequence yields disturbed spectra with 14.22 ± 0.18 to 15.54 ± 0.39 Ma cooling ages and concordant spectra with 14.64 ± 0.15 to 14.68 ± 0.07 Ma cooling ages. Petrographic investigations suggest disturbed samples are associated with excess argon, intracrystalline deformation, mineral and fluid inclusions and/or chloritization that led to variations in argon systematics. We conclude that the entire metasedimentary sequence cooled rapidly through mica closure temperatures at  14.6 Ma. The Kampa Granite yields the youngest biotite ⁴⁰Ar/³⁹Ar ages of  13.7 Ma immediately below the granite–metasediment contact. We suggest that this age variation reflects either varying mica closure temperatures, re-heating of the Kampa Granite biotites above closure temperatures between 14.6 Ma and 13.7 Ma, or juxtaposition of rocks with different thermal histories. Our data do not corroborate the “inverse” mica cooling gradient observed in adjacent North Himalayan gneiss domes. Instead, we infer that mica cooling occurred in response to exhumation and conduction related to top-to-north normal faulting in the overlying sequence, top-to-south thrusting at depth, and coeval surface denudation.     

Speleology and magnetobiostratigraphic chronology of the Buffalo Cave fossil site, Makapansgat, South Africa

Speleological, stratigraphic, paleomagnetic and faunal data is presented for the Buffalo Cave fossil site in the Limpopo Province of South Africa. Speleothems and clastic deposits were sampled for paleomagnetic and mineral magnetic analysis from the northern part of the site, where stratigraphic relationships could be more easily defined and a magnetostratigraphy could therefore be developed for the site. This is also where excavations recovered the fossil material described. A comparison of the east and South African first and last appearance data with the Buffalo Cave fauna was then used to constrain the magnetostratigraphy to produce a more secure age for the site. The magnetostratigraphy showed a change from normal to reversed polarity in the basal speleothems followed by a short normal polarity period in the base of the clastic deposits and a slow change to reversed directions for the remainder of the sequence. The biochronology suggested an optimal age range of between 1.0 Ma and 600,000 yr based on faunal correlation with eastern and southern Africa. A comparison of the magnetobiostratigraphy with the GPTS suggests that the sequence covers the time period from the Olduvai event between 1.95 and 1.78 Ma, through the Jaramillo event at 1.07 Ma to 990,000 yr, until the Bruhnes-Matuyama boundary at 780,000 yr. The faunal-bearing clastic deposits are thus dated between 1.07 Ma and 780,000 yr with the main faunal remains occurring in sediments dated to just after the end of the Jaramillo Event at 990,000 yr.     

Amphibole Ar/Ar Geochronology from the Okcheon Metamorphic Belt, South Korea and its Tectonic Implications

An understanding of the Okcheon Metamorphic Belt (OMB) in South Korea is central to unraveling the tectono-metamorphic evolution of East Asia. Amphibole-bearing rocks in the OMB occur as calcsilicate layers and lenses in psammitic rocks, in the psammitic rocks themselves, and in the mafic volcanic layers and intrusives. Most amphiboles fail to show ⁴⁰Ar/³⁹Ar plateau ages; those that do have ages ranging from 132 to 975 Ma. The disturbed age pattern and wide variation in ⁴⁰Ar/³⁹Ar ages can be related to metamorphic grade, retrograde chemical reactions, excess Ar and amphibole composition. The oldest age (975 Ma) can be interpreted either as an old igneous or metamorphic age predating sedimentation or a false age caused by excess Ar. The youngest age of 132 Ma and the disturbed age pattern found in amphiboles from rocks located close to Jurassic granitoids are the result of retrograde thermal metamorphic effects accompanying intrusion of the granitoids. Some medium- or coarse-grained amphiboles in the calcsilicates are aggregates of fine-grained crystals. As a result, they are heterogeneous and prove to be readily affected by excess Ar. A disturbed age pattern in amphiboles from the calcsilicates occurring in the high-grade metamorphic zone may also be the product of excess Ar. On the other hand, the disturbed pattern of amphiboles present in the calcsilicates from the low-grade metamorphic zone could arise from both excess Ar and mixed ages. However, amphiboles from psammitic rocks and some calcsilicates in the high-grade metamorphic zone and in intrusive metabasites display real plateau ages of 237 to 261 Ma. The temperature conditions in the high-grade metamorphic zone were higher than the argon closing temperature for amphibole, and the amphiboles in this zone give plateau ages only when they are homogeneous in composition, lack excess Ar, and have not been thermally affected by intrusion of the granitoids. The unmodified ⁴⁰Ar/³⁹Ar ages prove rather younger than the age of the Late Paleozoic metamorphic event of 280 to 300 Ma, but they are close to muscovite K-Ar ages of 263 to 277 Ma. These ⁴⁰Ar/³⁹Ar amphibole ages are interpreted as the time of cooling that followed the main regional, intermediate-P/T metamorphic climax. The results demonstrate that interpretation of ⁴⁰Ar/³⁹Ar amphibole ages in an area subjected to several metamorphic events can be accomplished only by undertaking a thorough tectono-metamorphic study, accompanied by detailed chemical analysis of the amphiboles.     

喀喇昆仑断裂带走滑过程中伴随的快速隆升作用:热年代学证据

喀喇昆仑断裂带是青藏高原西部的一条大型右旋走滑断裂带,它是喜马拉雅山脉西段北侧重要的地质边界.本文在岩石学、变形构造的研究基础上,对喀喇昆仑断裂带东南段阿伊拉日居山-噶尔盆地地区的喀喇昆仑韧性剪切带中变质岩石的同构造矿物进行了40Ar/39Ar热年代学研究.显微构造研究表明,剪切带中的矿物记录了从高温(>600℃)到低温(<250℃)条件下的连续变形,表现为近水平的右旋剪切运动转变成斜向的右旋正滑,使绿片岩相的变形作用叠加在中-高温变形之上.暗示出走滑过程中存在隆升作用,热年代学结果显示其连续剪切变形作用从早中新世以来至少持续到4Ma,并且出现三个快速冷却阶段:第一个快速冷却阶段为从25～22Ma到21～18Ma期间,可能代表的是浅部高温剪切过程中变形局部停止或减慢的过程;第二个快速冷却时期为从15Ma到12～10Ma,是喀喇昆仑断裂带走滑过程中,阿伊拉日居山的快速隆升、噶尔盆地开始形成以及主要河流深切过程阶段;9Ma以来是第三个快速冷却过程,使阿伊拉日居山脉进一步快速隆升、噶尔盆地定形过程.根据不同年代地表地貌特征的右旋错位距离以及不同层次变形特征,估算出喀喇昆仑断裂带长期滑移速率为8～10mm/a,伴随的隆升速率为1mm/a.从显微构造和热年代学证据表明,晚第四纪以来该断裂经历了强烈的右旋走滑运动的同时伴随强烈的隆升作用.     

The 1992 drill core from the Kalkkop impact crater, Eastern Cape Province, South Africa: stratigraphy, petrography, geochemistry and age

New drill core data are provided which support earlier interpretations that the Kalkkop structure, a 600–630 m wide, near-circular feature south-southwest of Graaff-Reinet in the Eastern Cape Province of South Africa, is a meteorite impact crater. Shock metamorphosed clasts in suevitic crater fill and Re---Os isotope data of this breccia indicate the presence of a minor (0.05%) meteoritic component in the suevite. The new data come from a 1992 borehole, which transected the complete crater fill and extended from about 160 to 380 m depth into the sedimentary basement belonging to the Koonap Formation of the Beaufort Group (Karoo Supergroup). Dyke breccias were found in the otherwise coherent Beaufort Group sediments forming the floor to the Kalkkop Crater. Mostly narrow zones of different breccia types, including injections of lithic impact breccia, a possible pseudotachylite veinlet and cataclasite occur predominantly in an approximately 65 m wide zone below the crater floor, with a few other cataclasite occurrences found lower down in the basement. Stratigraphical crater constraints provide information for the depth-diameter scaling and breccia volumes associated with such small, bowl-shaped impact craters formed in sedimentary targets.U---Th series dating of limestone samples from near the top and the bottom of the crater sediment fill constraints the age of the Kalkkop impact event to about 250 ± 50 ka, similar to the age of the Pretoria Saltpan impact crater, also located in South Africa. The variety of different breccia types (polymict and monomict impact breccias; local formations of pseudotachylitic and cataclastic breccias) observed in the crater fill of the Kalkkop Crater indicates the need to carefully distinguish different breccia types in order to assess the respective importance of each formation.     

Determining accurate temperature-time paths from U-Pb thermochronology: An example from the Kaapvaal craton, southern Africa

Thermochronology has revolutionized our understanding of the establishment and evolution of lithospheric thermal structure. However, many potential benefits provided by the application of diffusion theory to thermochronology have yet to be fully exploited. This study uses apatite (T_c = 450-550 °C) and titanite (T_c = 550-650 °C) U-Pb ID-TIMS thermochronology at the single- to sub-grain scale to separate the variable effects of volume diffusion of Pb from metamorphic (over)growth above and below the T_c of a mineral. Data are presented from two ca. 3227 Ma tonalite samples from north and south of the Barberton Greenstone Belt (BGB), southern Africa. Two distinct populations of apatite from a sample north of the BGB record fast cooling followed by metamorphic growth ∼10 Myr later. Both apatite and titanite dates from south of the BGB show a strong correlation with the grain size and record 100 Myr of post-emplacement cooling. Complex core-rim zoning observed in cathodoluminescence images of apatite is interpreted to reflect metamorphic overgrowth above the T_c. The age and topology of grain size versus date curves from titanite and apatite are used in combination with a finite-difference numerical model to show that slow, non-linear, cooling and not thermal resetting is responsible for the observed distribution. The thermal histories from either side of the BGB are very different and provide unique insight into the BGB’s tectonic evolution: a ∼70 Myr period of apparent stability after ca. 3.2 Ga terrane assembly was followed by fast exhumation south of the BGB that led to lower-crustal melting and intrusion of granitic batholiths ca. 3.14-3.10 Ga.     

Thaumasite from the Tschwinning mine,South Africa

Summary Thaumasite from the manganese mine of Tschwinning, South Africa, has the formula Ca_3.097 Si_1.062OH_6.372(CO₃)_0.994(SO₄)_1.000·11.596 H₂O. Unit cell parameters (a=11.013(2) Å,c=10.379(5) Å,V=1090.1(6) ų) and refraction indices (n_e=1.458(2),n _o=1.498(2)) compare well with the best ones available in the literature. The IR spectrum and DT-TG profiles are given. Contradictions between the IR spectrum, a recent structural refinement and the DT-TG are discussed, but cannot be explained satisfactorily.

---

Thaumasit aus der Mangan-Mine von Tschwinning, Süd-Afrika

Zusammenfassung Thaumasit aus der Mangan-Mine von Tschwinning, Süd-Afrika, besitzt die Formel Ca_3.097 Si_1.062OH_6.372(CO₃)_0.994(SO₄)_1.000·11.596 H₂O. Die Parameter der Elementarzelle (a=11.013(2) Å,c=10.379(5) Å,V=1090.1(6) ų) und die Brechungsindizes (n _e=1.458(2),n _o=1.498(2)) zeigen gute Übereinstimmung mit verfügbaren Literaturdaten. Es werden ein IR-Spektrum und DT-TG-Profile präsentiert. Gegensätze zwischen dem IR-Spektrum, einer neueren Strukturverfeinerung und dem DT-TG werden diskutiert, können jedoch nicht zufriedenstellend erklärt werden.

---

---

With 2 Figures     

Low‐temperature thermochronology of the Mt Painter Province,South Australia

Apatite fission track results are reported for 26 outcrop samples from the Mt Painter Inlier, Mt Babbage Inlier and adjacent Neoproterozoic rocks of the northwestern Curnamona Craton of South Australia. Forward modelling of the data indicates that the province experienced variable regional cooling from temperatures >110°C during the Late Palaeozoic (Late Carboniferous to Early Permian). The timing of this cooling is similar to that previously reported from elsewhere in the Adelaide Fold Belt and the Curnamona Craton, suggesting that the entire region underwent extensive Late Palaeozoic cooling most likely related to the waning stages of the Alice Springs or Kanimblan Orogenies. Results from the Paralana Fault Zone indicate that the eastern margin of the Mt Painter Inlier experienced a second episode of cooling (～40–60°C) during the Paleocene to Eocene. The entire region also experienced significant cooling (less than ～40°C) during the Late Cretaceous to Palaeogene in response to unroofing and/or a decrease in geothermal gradient. Regional cooling/erosion during this time is supported by: geomorphological and geophysical evidence indicating Tertiary exhumation of at least 1 km; Eocene sedimentation initiated in basins adjacent to the Flinders and Mt Lofty Ranges sections of the Adelaide Fold Belt; and Late Cretaceous ‐ Early Tertiary cooling previously reported from apatite fission track studies in the Willyama Inliers and the southern Adelaide Fold Belt. Late Cretaceous to Palaeogene cooling is probably related to a change in stress field propagated throughout the Australian Plate, and driven by the initiation of sea‐floor spreading in the Tasman Sea in the Late Cretaceous and the Eocene global plate reorganisation.     

Mineralogy and 40Ar/39Ar geochronology of supergene Mn-oxides in the Dongxiangqiao deposit,Hunan Province,South China

Mineralogy and Petrology - The Dongxiangqiao Mn deposit in Hunan Province is one of numerous supergene Mn-oxide deposits in central South China. This deposit is derived from chemical weathering of...     

A pyroxene-ilmenite intergrowth from the Monastery Mine,South Africa

A clinopyroxene-ilmenite intergrowth in a xenolith from the kimberlite Monastery Mine, South Africa, may be derived by exsolution from a single phase at depth.     

Highly retentive core domains in K-feldspar and their implications for 40Ar/39Ar thermochronology illustrated by determining the cooling curve for the Capoas Granite,Palawan, The Philippines

K-feldspar from the late Miocene Capoas Granite on Palawan in The Philippines appears to contain highly retentive diffusion domains that are closed to argon diffusion at near-solidus temperatures during cooling of this ～7 km-diameter pluton. This is an important result, for K-feldspar is commonly considered not retentive in terms of its ability to retain argon. Closure temperatures for argon diffusion in K-feldspars are routinely claimed to be in the range ～150–400°C but the release of ³⁹Ar from irradiated K-feldspar during furnace step-heating experiments in vacuo yields Arrhenius data that imply the existence of highly retentive core domains, with inferred closure temperatures that can exceed ～500–700°C. These high closure temperatures from the Capoas Granite K-feldspar are consistent with the coincidence of ⁴⁰Ar/³⁹Ar ages with U–Pb zircon ages at ca 13.5 ± 0.2 Ma. The cooling rate then accelerated, but the rate of change had considerably slowed by ca 12 Ma. Low-temperature (U–Th)/He thermochronology shows that the cooling rate once again accelerated at ca 11 Ma, perhaps owing to renewed tectonic activity.