地质因素对源岩评价结果的影响及其相对贡献量大小模拟

源岩评价是油气资源评价的基础。目前,基于源岩排烃过程模拟结果可对源岩品质、属性和有效性进行综合定量评价。本文采用盆地模拟技术和不确定性分析方法对影响源岩评价的十三种地质因素的作用大小及其相对贡献量进行评价,同时探讨各种地质因素作用下源岩品质评价指数,属性评价指数和有效性评价指数的变化情况及分布概率。     

基于多重近似索引的空间距离半连接

为了更有效地解决基于外部近似索引空间距离半连接效率较低问题,提出一种基于多重近似索引的空间距离半连接处理方法.该方法在充分利用多重近似索引结构特征基础上,推导出在半连接处理中的距离和空间对象数量约束关系,并在距离半连接算法中利用这些约束关系进行连接处理,从而减少了进行精过滤处理空间对象的数量.通过实验分析表明,基于多重近似索引的距离半连接算法有效,并且基于多重近似索引比基于外部近似索引的距离半连接效率要高.      

内蒙×××蓝晶石矿可选性试验研究

对内蒙×××蓝晶石矿采用脱泥-碱性介质浮选-磁选和脱泥-磁选-酸性介质浮选两种工艺流程进行可选性试验研究。结果表明,酸性介质浮选的分选效率和选择性较好。该矿采用脱泥-磁选-酸性介质浮选工艺流程,获得了较好的试验指标。     

Effects of process parameters on the comminution capability of high pressure water jet mill

To improve comminution efficiency, the effects of several process parameters on the comminution capability of high pressure water jet mill were investigated. Fractal dimension of particle size distribution, as an index of water jet mill comminution capability, was used for describing the fineness of the comminution product. Nine process parameters including the pump pressure, the mixing tube length and diameter, the coal particle mass flow rate, the diameter of feed material particle, the standoff distance, loading times, hardness of the target and the impact angle were investigated individually. The results obtained from this study provide deeper insight into the high pressure water jet comminution technology and a basis for process parameters optimization. We also show that the fractal dimension of particle size distribution can be used to monitor the comminution capability and estimate the degree of particle comminution.     

基于机械比能理论的煤岩可钻性分级方法

通过机械比能对煤矿瓦斯抽采钻孔过程中的围岩进行可钻性分级,可为钻机调整钻进参数提供依据。针对瓦斯抽采钻孔过程中人工判层难度大、效率低的问题,提出一种以机械比能为可钻性评价指标,结合极限学习机的煤岩可钻性分级方法。采用ABAQUS建立了PDC钻头破岩仿真模型,从材料类型、钻头转速和钻压力三个方面研究了PDC钻头破岩过程中钻进速度和机械比能的变化规律。同时,获得了钻进参数及机械比能的训练数据,采用极限学习机分别对钻进参数和机械比能数据进行学习,最后,对这两种可钻性分级指标下的分级准确率进行对比。结果表明:以机械比能作为可钻性指标时的分级准确率达到90%以上,高于以钻进参数作为可钻性指标时的准确率。分级结果可以为钻机调整钻进参数、实现自适应钻进提供理论依据。      

基于立方体元的Shear - warp体绘制加速算法

大规模三维地震数据的直接体绘制,是一个计算和数据双重密集型问题.为了提高三维图像的重建效率,提出了一种基于立方体元的Shear- warp地震数据体绘制算法.该算法通过构建立方体元在相邻的体素点之间建立联系;然后根据地震数据的特征对体元进行分类,在绘制过程中通过二叉树索引,快速定位分类结果.通过索引结果,避免了对等值体...     

运用文化理论和模糊网络分析评价黑河中游最优水资源管理风格

管理者的管理风格与环境相匹配是有效管理的关键. 采用模糊网络分析法和文化理论方法评价了黑河中游张掖市最优水资源管理风格. 以文化理论为基础, 采用理论分析法和频度分析法, 建立水资源管理风格评价指标体系. 运用网络层次分析法确定各项指标的权重; 基于网络层次分析法的计算结果, 运用模糊综合评价法对文化理论中提出的个人主义者、 宿命论者、 等级主义者和平均主义者4种风格进行实例研究, 依据分值大小进行排序. 结果表明: 等级主义者得分最高, 即为最优的管理风格. 因此, 在黑河中游水资源管理的过程中应主要实行等级主义者管理风格, 可为水资源管理部门分配人员、 选聘人才、 培训方向提供理论依据, 有助于提高水资源管理效率.     

我国地质勘查行业全要素生产率测算分解实证研究北大核心CSCD

研究地质勘查行业发展战略时应充分考虑技术进步对行业发展的贡献。本文以2010~2020年全国31省(区、市)非油气地质勘查单位的投入产出数据为样本,基于DEA-Malmquist指数法测算了我国地质勘查行业近十年的全要素生产率(TFP)变化,结合技术进步率(TP)、技术效率(EC)、纯技术效率(PC)和规模效率(SC)等分解项得出:我国地质勘查行业近十年平均全要素生产率指数偏低,其主要原因是技术进步率较低,因为技术进步率与我国地质勘查行业的发展水平关系密切。各地区地质勘查行业发展不平衡,西部地区地质勘查行业的TFP指数普遍高于东部地区和中部地区,但大量的资产和劳动力投入仍在东部地区,导致市场资源配置的扭曲,是我国地质勘查行业TFP指数整体偏低的重要原因。     

滑坡治理工程效果评估方法研究

滑坡治理是一项系统工程,其防治效果的评估更是一项复杂的综合分析与评价过程。通过对大量滑坡地质灾害防治工程实例的现场调研、对比分析,利用系统工程分析原理对滑坡治理工程防治效果评价进行了探索研究。本文将滑坡治理工程防治效果评估划分成1个多层次、多指标的多级评价过程,以定性与定量评价相结合的方式,从滑坡地质勘察、设计、施工组织以及工程监测等整个治理流程上,分阶段建立各自相应的子目标层评估指标体系。在此基础上,结合"边坡不稳定指数(SII)"分析方法,利用各子目标层的评价结果作为最终的评价因子,建立了综合评估模型——滑坡治理工程"效果评估指数(AEI)"法,实例应用显示此方法能够实现对滑坡防治效果的全面分析与评价。     

LiDAR-supported prediction of slope failures using an integrated ensemble weights-of-evidence and analytical hierarchy process

The present study investigates a potential application of different resolution topographic data obtained from airborne LiDAR and an integrated ensemble weight-of-evidence and analytic hierarchy process (WoE–AHP) model to spatially predict slope failures. Previously failed slopes of the Pellizzano (Italy) were remotely mapped and divided into two subsets for training and testing purposes. 1, 2, 5, 10, 15, and 20 m topographic data were processed to extract nine terrain attributes identified as conditioning factors for landslides: slope degree, aspect, altitude, plan curvature, profile curvature, stream power index, topographic wetness index, sediment transport index, and topographic roughness index. Landslide (slope failure) susceptibility maps were produced using a single WoE (Model 1), an ensemble WoE–AHP model that used all conditioning factors (Model 2), and an ensemble WoE–AHP model that only used highly nominated conditioning factors (Model 3). The validation results proved the efficiency of high-resolution (≤ 5 m) topographic data and the ensemble model, particularly when all factors were used in the modeling process (Model 2). The average success rates and prediction rates for Model 2 that used ≤ 5 m resolution datasets were 84.26 and 82.78%, respectively. The finding presented in this paper can aid in planning more efficient LiDAR surveys and the handling of large datasets, and in gaining a better understanding of the nature of the predictive models.     

抽出-处理技术抽出污染地下水——抽出效率及抽出终点

针对抽出-处理技术修复污染地下水过程中抽水井抽出效率随时间逐渐降低、抽出-处理技术运行终点（以下简称"抽出终点"）难以确定的问题,提出通过评估抽水井抽出效率,以分段、多次优化抽水方案提高抽出效率、降低修复成本、减少修复时间为工作思路,利用层次分析法和专家打分法实现方案优化时间节点选择。以青海某铬盐厂为例,通过建立抽水方案优化时间节点评价指标体系,可定量分析方案优化时间节点,合理确定抽出终点。结果显示：第1次优化结果为抽水井抽出效率在20%~40%时应重新布设抽水方案（P₃）,即采用原抽水方案抽水100 d后需重新布设抽水井;第2次优化结果为抽水井抽出效率在20%~40%时应与其他修复技术联用（P₇）,即采用一次优化后抽水方案继续抽水300 d后需联合其他修复技术开展治理。经评估,2次优化可有效提高抽水井抽出效率,使修复时间缩短600 d,相同时间内含水层中六价铬去除率增加8.31%。     

基于新表面理论的TBM破岩效率评价指标

岩碴是岩-机作用的直接产物,也是评价隧道掘进机（TBM）破岩效率和优化TBM掘进参数的有效指标。依托兰州水源地建设工程和龙岩万安溪引水工程,开展不同岩性条件下TBM岩碴筛分试验,得到了岩碴粒径分布规律。基于新表面理论,从滚刀破岩能量转化角度出发,提出了一种新的TBM破岩效率评价指标。基于岩碴粒径分布规律和TBM掘进参数统计,探讨了新表面理论指标与比能、岩碴粗糙度指数之间的关系,指出了新表面理论指标在反映岩碴破碎程度和评价TBM破岩效率方面的优势。对新表面理论指标与TBM掘进推力以及刀间距s与贯入度p的比值进行回归分析,得到了硬岩（围岩等级为Ⅱ级）和软岩（围岩等级为III级）掘进条件下的TBM最优掘进推力和s/p取值区间。研究表明：（1）新表面理论指标符合岩石破碎学原理,可准确评价TBM破岩效率。岩碴越是破碎,新表面理论指标越大,掘进能耗越高,此时TBM破岩效率相对较低。（2）新表面理论指标与比能、岩碴粗糙度指数均具有良好的线性相关关系。岩碴越是破碎,破碎单位体积岩石的能量消耗越大,新表面理论指标越大,对应的粗糙度指数越小。软岩掘进条件下TBM掘进比能低于硬岩,而岩碴破碎程度高于硬岩。（...     

GIS空间数据索引技术研究与实现

GIS通常包含各种大量的空间信息,空间数据索引的建立有利于提高空间数据的存储、检索效率。因此,对空间数据索引模型的研究具有重要的现实意义。OracleSpatial的R-树和四叉树是索引两种空间数据索引模型和空间数据双层查询模型。在Oracle8i对象关系型的数据库管理系统中,通过空间数据和属性数据的有效结合,利用OracleSpatial提供R-树和四叉树两种空间索引方式,可实现GIS中空间数据索引、检索功能,保证了空间数据查询的快速性和准确性。     

Removal of surfactant from industrial wastewaters by coagulation flocculation process

Surfactants are among the most widely disseminated xenobiotics that contribute significantly to the pollution profile of sewage and wastewaters of all kinds. Among the currently employed chemical unit processes in the treatment of wastewaters, coagulation-flocculation has received considerable attention for yielding high pollutant removal efficiency. Jar-test experiments are employed in order to determine the optimum conditions for the removal of surfactants, COD and turbidity in terms of effective dosage, and pH control. Treatment with FeCl₃ proved to be effective in a pH range between 7 and 9. The process is very effective in the reduction of surfactants and COD, the removals are 99 and 88 % respectively, and increased BOD⁵/COD index from 0.17 to 0.41. In addition to precipitation coagulation process, adsorptive micellar flocculation mechanism seems contribute to the removal of surfactants and organic matters from this rejection.     

水文孔成井阶段的洗井方法和适用条件

水文孔施工中洗井是管井成井工艺中的一个主要环节,各种洗井方法都有它的优点和一定的应用条件,其工作效果与含水层的类型、地下水压力、钻进泥浆的指标、井管材质、井身结构、以及井深浅程序有着密切的关系。要提高洗井效率,只有结合具体情况,选择合适的方法才能取得较好的洗井效果。     

Evaluation of Combined Base Soil Erodibility and Granular Filter Efficiency

Filters managed in zoned dams are designed according to criteria based on the grain size distribution of both filter and eroded soil. However, the constriction size distribution of the filter is the key parameter which governs the filter retention process of flowing eroded particles. To assess the filter efficiency regarding eroded particles, several filters and base soils are tested in a vertical cell with a configuration coupling erosion and filtration processes. For setting the boundary condition of eroded particles at the filter inlet, hole erosion test (HET) was performed on the base soil. The investigation of the evolution of filter behavior shows that the void ratio and the grain shape are of a great influence on filter efficiency. A new approach of filter clogging was proposed by evaluating a damage index which is affected by various parameters such as the ratio D₁₅/d₈₅ and the size of eroded particles. An approach linking the geometrical parameters (damage index) to the hydraulic conductivity leads to an estimation of the filter performance which provides a more quantifiable and realistic criterion. The results indicate that even existing criteria were not met; the tested filters remain efficient as regards to experimental data. An analytical approach based on constrictions size distribution was used and pore reduction was matched with experimental results.

     

生态补水综合效益评价指标体系建立

在完成黑河流域补水工程的基础上,从理论上对生态补水进行深入探究,从生态环境、社会效益、经济效益和资源价值效益几方面,建立了生态补水综合效益评价指标体系。生态指标为生物多样性指数、优势度指数、生物生产力指标和抗逆力指标;经济效益指标采用费用-效益分析法进行评估;社会效益指标为人口承载力和社会福利的改变,采用恩格尔系数和基尼系数进行评估。     

基于欧拉反褶积法的无人机航磁找矿应用

无人机航磁测量以其高效、安全、低成本等优点逐渐应用到中小面积大比例尺资源勘探领域。本文针对安徽芜湖市三山区22 km²区域构造刻画和找矿前景预测,开展1∶20 000高精度无人机航磁测量工作;推导了欧拉反演求解过程,并分析对比构造指数选取,使用构造指数为0的欧拉反褶积对航磁数据进行反演求解,获得地下磁异常体构造边界解集信息;将其应用到研究区域航磁数据反演,根据反演得到的边界位置和深度信息圈定了18处断裂,并结合异常特征给出了8.7 km²岩浆岩分布区,根据宁芜区域铁矿成矿特点,圈定岩浆分布区及边界为成矿详查区。     

新型三轴剪切试验试样排水固结装置的研制与应用

三轴剪切试验是岩土工程中常见的室内试验,其目的主要是为了获得土的抗剪强度指标和土中孔隙水压力的变化情况。三轴的固结不排水剪（CU）和固结排水（CD）剪试验可以获得土的总应力抗剪强度指标和有效应力抗剪强度指标,因此具有其它剪切试验无法替代的优势。但因试验过程中排水固结的时间很长,影响了试验进度,从而影响到整个工程的进度和经济效益。通过对三轴剪切试样排水固结过程的机理分析,介绍了制作一种可以大大缩短大量试样排水固结时间的装置及该装置的研制方法。采用该装置,可使CU试验的效率提高6～12倍,可使CD试验的效率提高3～6倍。可节约大量的生产成本,提高工作效率,经济效益明显。     

Gas drainage efficiency: an input–output model for evaluating gas drainage projects

Gas drainage not only ensures safety in coal mine but also produces clean energy and reduces emission of greenhouse gases. However, a good method to evaluate the efficiency of gas drainage is still absent. In this study, we firstly propose a definition of gas drainage efficiency which is defined as the ratio of the real output–input efficiency to the ideal output–input efficiency. The definition combines both engineering parameters such as radius, length of borehole and economical parameters such as drilling cost to develop a comprehensive index for the assessment of the engineering–economical efficiency. Then, three important factors to determine gas drainage efficiency including the difficulty level, the input and output, namely investment and production, and the attenuation characteristic of gas drainage are discussed. Based on the relative standards, the index can reasonably evaluate gas drainage projects with different difficulty levels, thereby avoiding dependence on an absolute standard for the evaluation of overall difficulty levels. The indicator can also take both input and output into consideration and reflect the reduction of gas drainage flow with time. Besides, we investigate the relationship between gas drainage efficiency and several engineering parameters, including borehole radius, borehole length and the quality of borehole sealing. The results show the possibility of optimizing engineering parameters to maximize gas drainage efficiency. Finally, the evaluation method is proven efficient by performing case studies.