Textural studies on red sediments of Bhimunipatnam,Andhra Pradesh,east coast of India

The study presents the textural characteristics of late Quaternary red sediments of Bhimunipatnam to understand the process of formation of these sediments. The red sediments are classified into (a) yellow sediments (b) reddish brown sediments (c) brick red sediments and (d) light yellow sediments sequence in the vertical litho section. The yellow sediments, rests on the khondalite basement, comprises of medium grained, moderate to poorly sorted and positively skewed. The rounded pebble beds with trough cross bedding indicate high energy turbulent conditions of deposition. The fining upward sequences indicate sediments were deposited under decreasing energy conditions under fluvial regime.The iron bearing minerals like garnets and pyriboles have undergone chemical weathering under high oxidizing environment resulting in addition of silt and clay to the reddish brown and brick red sediments and concretions were formed by carbonate precipitation. These processes caused changes in the mean grain size and sorting nature of these sediments which are originally aeolian in origin. The light yellow sediments were medium to fine grained, well sorted and similar to modern dune sands in terms of textural parameters. These sediments were deposited under low oxidation environmental conditions and acquired yellow colour due to Fe hydroxides.     

The relationship of sediment texture with coastal environments along the Kuala Terengganu Coast, Malaysia

The subtidal sediments of four coastal environments (beach, berm, surf zone and nearshore sea floor) of Kuala Terengganu have been studied in terms of their textural characteristics and depositional process. Sampling and statistical analyses of the grain size distributions of beach, surf zone and shallow sea-floor sediments at various locations along the coastline show that they varied in their mean grain size as well as values of sorting and skewness. The statistical parameters of grain size distributions thus allowed recognition of distinct sub-environments. The size distribution of such sediments suggests that the various processes that are responsible for their transportation and deposition are wave, current and wind action. The different energy conditions and the morphology of each coastal environment seem to be reflected in the characteristics of the sediments in each environment.     

Microtextures of detrital sand grains from the Tecolutla,Nautla, and Veracruz beaches,western Gulf of Mexico,Mexico: implications for depositional environment and paleoclimate

Detrital sand grains from three beaches (Tecolutla, Nautla, and Veracruz) along the western Gulf of Mexico were studied by a scanning electron microscope, to investigate the depositional environment and paleoclimate. Totally, 24 microtextures are identified; among them, 13 are grouped as mechanical origin, 5 as mechanical and/or chemical origin, and 6 as chemical origin. These microtextures are nonuniformly distributed among the three beach areas. Concoidal fractures, straight and arcuate steps at Tecolutla and Veracruz beaches indicate that the sand grains were derived from the crystalline rocks. The abundance of angular outline grains at the Nautla beach supports for short transportation probably close to the source area. The domination of rounded sand grains in the Veracruz beach reveals that the sediments were derived by the aeolian mechanism. Chattermark trials at the Veracruz beach sands are indicating a wet tropical climate. Chemical features like silica globules, silica pellicle, and trapped diatoms in the Tecolutla and Veracruz beach sands suggest a silica saturated environment. Similarly, chemical etching and solution pits are common in the Veracruz beach sands, which are probably linked to the contaminated sea water. Desiccation crack at Veracruz beach sands is an indicator of temperature changes in the beach environment. Broken benthonic foraminifera Elphidium discoidale sp. present in the Veracruz beach indicates a high-energy littoral environment.     

Colonisation of Beach-Cast Macrophyte Wrack Patches by Talitrid Amphipods: A Primer

Sandy beaches are characterised by heterogeneously distributed food sources both in time and space. The major energy supply is derived from marine subsidies in the form of beach-cast macrophyte wrack. Wrack patches are short-lived, and their position on the beaches varies with tidal and seasonal cycles as well as weather conditions. Little is known about how sandy beach inhabitants orient themselves towards, and colonise, wrack patches. In a series of field studies on islands off Vancouver Island (British Columbia, Canada), colonisation patterns of wrack patches by beach fleas and sand hoppers (Amphipoda: Talitridae), the most abundant macrofaunal detritivores, were studied. As indicated by colonisation of experimental patches of wrack and wrack surrogates that were either visible or buried in the sand, beach fleas (Traskorchestia traskiana) rely on olfactory cues for locating freshly deposited wrack patches in their patchy and dynamic habitat. Dense colonisation of freshly deposited algal wrack generally occurred within less than 1 h but depended upon the tidal height of wrack patches. Beach flea density in freshly deposited wrack patches increased with increasing tidal height. By contrast, sand hoppers (Megalorchestia californiana) colonised freshly deposited wrack patches in densities that decreased with tidal height. Discussing these interspecific differences, we provide a primer for future detailed studies on transport of matter along the marine–terrestrial gradient of sand beaches.     

锦州湾泥沙来源、洄淤状况与建港条件分析

锦州湾泥沙主要来源于沿岸入海河流的输送,外海水体的携带与沿岸、岛屿蚀余物质的补给。每年进入湾内的泥沙总量约为３３—３５万吨,假如这些泥沙不再向湾外流出,在湾内作均匀分配沉积,则相当于在湾底铺上５ｍｍ厚的土。水准和水深重复测量表明,潮滩以稳定的弱堆积为主,水下浅滩基本处于稳定状态。该湾在非正常情况下产生骤淤的可能性不大。综合建港条件良好。     

Discrimination of accreted and eroded coasts using heavy mineral compositions of the Nile Delta beach sands, Egypt

Coastal erosion has occurred on the beaches of the three major promontories of the Nile Delta of Egypt. The eroded sand is generally carried alongshore to the east, or locally to the west, from these promontories and is deposited in areas of beach accretion between promontories. In this study the heavy minerals of 150 samples have been investigated with the aim of differentiating between eroded and accreted beaches. Discrimination was achieved by using bivariate plots of the raw weight percentage data and Q-mode factor analysis. Factor analysis yielded two ‘mineral assemblages’: Factor 1 is dominated by augite, hornblende and epidote, while Factor 2 consists of opaque minerals, garnet, zircon, rutile and monazite. These two mineral factors are produced by the selective sorting of heavy minerals by natural processes of waves and currents. Minerals of Factor 2 are associated with high density opaques which tend to concentrate as a lag in areas of erosion. Conversely, the lower density minerals of Factor 1 are preferentially transported away from areas of erosion and carried to the accreted shorelines.     

Grain-size parameters of insoluble residues in mixed terrigenous-skeletal carbonate sediments and sedimentary rocks: some New Zealand examples

Grain-size parameters derived from the mechanical analysis of acid-insoluble residues from mixed terrigenous-shell beach sediments from Auckland, New Zealand, are more effective for interpreting the depositional processes, and for characterizing the beach environment on textural scatter plots, than are parameters based on the analysis of the total beach samples. This results mainly from the wide variations in size of hydraulically equivalent skeletal carbonate grains in the sediment, especially in the coarser size grades, but may also be accentuated by the local origin and susceptibility to alteration of the shell material. Compared with the total sediment grain-size distribution, the insoluble residues from the beach deposits are characteristically finer-grained, better sorted, and more consistently coarse-skewed and leptokurtic. The grain-size distribution characteristics of insoluble residues from several stratigraphic units in a sequence of Oligocene mixed terrigenous-skeletal shelf sediments in the South Auckland region distinguish depositional mechanisms and environmental energy levels for each unit that are consistent with interpretations made on the basis of carbonate petrography and palaeontology. With regard to the bulk content of terrigenous mud in the insoluble residues, the grain-size distribution of the fraction coarser than 4φ is alone diagnostic of the energy-time trends in these sediments. The grain-size parameters of the acid-insoluble residues in modern and ancient mixed terrigenous-skeletal carbonate sediments may provide more reliable criteria for distinguishing and characterizing the depositional environment of these deposits than do the parameters obtained from the size distribution of the total grain population.     

Sedimentology of the December 26, 2004, Sumatra tsunami deposits in eastern India (Tamil Nadu) and Kenya

The December 26, 2004 Sumatra tsunami caused severe damage at the coasts of the Indian ocean. We report results of a sedimentological study of tsunami run-up parameters and the sediments laid down by the tsunami at the coast of Tamil Nadu, India, and between Malindi and Lamu, Kenya. In India, evidence of three tsunami waves is preserved on the beaches in the form of characteristic debris accumulations. We measured the maximum run-up distance at 580 m and the maximum run-up height at 4.85 m. Flow depth over land was at least 3.5 m. The tsunami deposited an up to 30 cm thick blanket of moderately well to well-sorted coarse and medium sand that overlies older beach deposits or soil with an erosional unconformity. The sand sheet thins inland without a decrease of grain-size. The deposits consist frequently of three layers. The lower one may be cross-bedded with foresets dipping landward and indicating deposition during run-up. The overlying two sand layers are graded or parallel-laminated without indicators of current directions. Thus, it remains undecided whether they formed during run-up or return flow. Thin dark laminae rich in heavy minerals frequently mark the contacts between successive layers. Benthic foraminifera indicate an entrainment of sediment by the tsunami from water depths less than ca. 30 m water depth. On the Indian shelf these depths are present at distances of up to 5 km from the coast. In Kenya only one wave is recorded, which attained a run-up height of 3 m at a run-up distance of ca. 35 m from the tidal water line at the time of the tsunami impact. Only one layer of fine sand was deposited by the tsunami. It consists predominantly of heavy minerals supplied to the sea by a nearby river. The sand layer thins landward with a minor decrease in grain-size. Benthic foraminifera indicate an entrainment of sediment by the tsunami from water depths less than ca. 30 m water depth, reaching down potentially to ca. 80 m. The presence of only one tsunami-related sediment layer in Kenya, but three in India, reflects the impact of only one wave at the coast of Kenya, as opposed to several in India. Grain-size distributions in the Indian and Kenyan deposits are mostly normal to slightly positively skewed and indicate that the detritus was entrained by the tsunami from well sorted pre-tsunami deposits in nearshore, swash zone and beach environments.     

Sedimentology and stratigraphy of a transgressive, muddy gravel beach: Waterside Beach, Bay of Fundy, Canada

Sediments exposed at low tide on the transgressive, hypertidal (>6 m tidal range) Waterside Beach, New Brunswick, Canada permit the scrutiny of sedimentary structures and textures that develop at water depths equivalent to the upper and lower shoreface. Waterside Beach sediments are grouped into eleven sedimentologically distinct deposits that represent three depositional environments: (1) sandy foreshore and shoreface; (2) tidal‐creek braid‐plain and delta; and, (3) wave‐formed gravel and sand bars, and associated deposits. The sandy foreshore and shoreface depositional environment encompasses the backshore; moderately dipping beachface; and a shallowly seaward‐dipping terrace of sandy middle and lower intertidal, and muddy sub‐tidal sediments. Intertidal sediments reworked and deposited by tidal creeks comprise the tidal‐creek braid plain and delta. Wave‐formed sand and gravel bars and associated deposits include: sediment sourced from low‐amplitude, unstable sand bars; gravel deposited from large (up to 5·5 m high, 800 m long), landward‐migrating gravel bars; and zones of mud deposition developed on the landward side of the gravel bars. The relationship between the gravel bars and mud deposits, and between mud‐laden sea water and beach gravels provides mechanisms for the deposition of mud beds, and muddy clast‐ and matrix‐supported conglomerates in ancient conglomeratic successions. Idealized sections are presented as analogues for ancient conglomerates deposited in transgressive systems. Where tidal creeks do not influence sedimentation on the beach, the preserved sequence consists of a gravel lag overlain by increasingly finer‐grained shoreface sediments. Conversely, where tidal creeks debouch onto the beach, erosion of the underlying salt marsh results in deposition of a thicker, more complex beach succession. The thickness of this package is controlled by tidal range, sedimentation rate, and rate of transgression. The tidal‐creek influenced succession comprises repeated sequences of: a thin mud bed overlain by muddy conglomerate, sandy conglomerate, a coarse lag, and capped by trough cross‐bedded sand and gravel.     

Facies,environments and sedimentary cycles in the Middle Eocene,Bracklesham Formation of the Hampshire Basin: evidence for global sea-level changes?

The Bracklesham Formation is of Middle Eocene age and occurs throughout the Hampshire Basin of southern England. The basin is elongated east-west and filled with Lower Tertiary sediments. Its southern margin is marked by either large, northward-facing monoclines, or faults, both of which underwent differential movement, with uplift of the southern side throughout the Middle Eocene. The Bracklesham Formation, which is up to 240 m thick, shows pronounced lateral facies changes with dominantly marine sediments in the east passing to alluvial sediments in the west. Four principal sedimentary environments: marine, lagoonal, estuarine and alluvial are distinguished. Marine sediments comprise six facies including offshore silty clays and glauconitic silty sands, beach and aeolian dune sands, and flint conglomerates formed on pebble beaches. Offshore sediments predominate in the eastern part of the basin, as far west as Alum Bay, where they are replaced by nearshore sediments. Lagoonal sediments comprise four facies and formed in back-barrier lagoons, coastal marshes and, on occasions, were deposited over much of the basin during periods of low salinity and restricted tidal motion. Five estuarine facies represent tidal channels, channel mouth-bars and abandoned channels. These sediments suggest that much of the Bracklesham Formation was deposited under micro- to meso-tidal conditions. Alluvial sediments dominate the formation to the west of Alum Bay. They comprise coarse to fine sands deposited on the point-bars of meandering rivers, interbedded with thick sequences of laminated interchannel mudstones, deposited in marshes, swamps and lakes. Extensive layers of ball clay were periodically deposited in a lake occupying much of the alluvial basin. In alluvial areas, fault movement exposed Mesozoic rocks along the southern margin of the basin, the erosion of which generated fault-scarp alluvial fan gravels. Locally, pisolitic limestone formed in pools fed by springs emerging at the faulted Chalk-Tertiary contact. In marine areas, flint pebbles were eroded from coastal exposures of chalk and accumulated on pebble beaches and in estuaries. From other evidence it is suggested that older Tertiary sediments were also reworked. The Bracklesham Formation is strongly cyclic and was deposited during five marine transgressions, the effects of which can be recognized throughout the basin in both marine and alluvial areas. Each of the five transgressive cycles is a few tens of metres thick and contains little evidence of intervening major regression. The cycles are thought to represent small-scale eustatic sea-level rises (‘paracycles’) superimposed upon a major transgressive ‘cycle’ that began at the base of the Bracklesham Formation, following a major regression, and was terminated, at the top of the Barton Formation by another major regression. This major cycle can be recognized world-wide and may reflect a period of rapid northward extension of the mid-Atlantic ridge.     

波浪作用下砂质滩坝的沉积过程与沉积模式

受波浪及沿岸流影响,在滨岸地区形成的滩坝砂体是滨海（湖）带发育的主要砂体类型。目前国内外学者对滩坝沉积砂体的认识多来自于现代沉积和油气地质特征,对滩坝砂体的沉积机制和内部结构研究相对较弱。基于沉积水槽实验,采用规则波浪对沙质斜坡滨岸带进行模拟实验,观测波浪作用下滨岸带滩坝形成过程和波浪运动特征,记录波浪作用下滨岸带沙质滩坝在不同浪带平面时空演化规律。实验结果显示:波浪是改造湖岸原有沉积物的关键驱动力,波浪作用下沙质岸滩床面泥砂将发生输移运动,而滩坝是陆湖（海）泥沙在水动力驱动下搬运沉积的结果,水动力的强弱及水流结构引起泥沙在空间上的不均匀输运和分布,进而塑造不同的滩坝形态。与强波浪相关的高水位可以加速滩坝系统的形成并最终形成大规模的滩坝砂;相比之下,与较弱波浪相关的低水位只能略微改变初始沉积物形态。根据不同的沉积物特征可将实验中的滩坝系统分为三类:冲浪带和碎浪带滩坝系统近端部分的大规模厚层坝砂,破浪带和升浪带滩坝系统中部分布广泛的薄滩砂,以及位于滩坝系统中远端的弧形或平行排列的脊状、砂纹坝砂。建立了水槽实验模式下滩坝沉积模式,可用于指导油气勘探开发。     

Protection of tropical barrier beaches: a potential remedial measure

Chronic erosion is found along structurally protected beaches of Kerala, viz., Narakkal (17.8 m³/m¹) and Munambam (80.36 m³/m^–1). The textural characteristics of these beaches are discussed. Observations on the horizontal and vertical distribution of the intertidal fauna of Narakkal beach are presented. The feasibility ofSeaevola taccada as a vegetative beach protective measure is elucidated. The impact of anthropogenically-climatically induced coastal hazards such as sea level rise (SLR) on a typical barrier beach of Kerala is depicted. An alternative beach protective measure to curtail the impact of sea level rise on sandy and atoll beaches of a tropical region is highlighted.     

宣化地区古老的潮汐沉积

大约在十八亿年前左右,在经过长期风化剥蚀后基本上处于准平原状态的华北地台上,沿着北东向的几条基底断裂,形成一个沿朝阳、蓟县、石家庄、长治一线展布的北东向长形断陷沉积盆地。初期,可能仅在局部地区(如蓟县附近)沉积河流相砂砾岩。     

Structure of gravel beaches and their relationship to tidal range

The height of accretionary gravel beaches, determined by the vertical distance between the large sphere zone at the seaward margin and the large disc zone at the landward margin, is determined mainly by tidal range. As the beach builds seaward, this height translates into thickness and so the complete thickness of gravel beach accumulations is a good indicator, in the geological record, of tidal range. Beaches with a small tidal range have the zone between the large discs and the large spheres compressed and sometimes steepened. These beaches are characterized mainly by cusps and berms, both of which yield steeply dipping, seaward building, cross‐strata. Beaches built by large, persistent waves generally have a steep profile, whereas those with small wave height appear to have a shallow profile. Cusps generally have extremely well‐sorted gravels, often in an openwork fabric and with a landward crown of coarse gravel that may grade seaward into shape‐sorted, gently dipping gravels. Berms, which may extend for hundreds of metres along the coast, comprise, in section, very well‐sorted cross‐stratified gravels that may intermittently build seaward for a distance >15 m. Extensive selection pavements typify beaches with a high tidal range and comprise sheets of gravel which are well‐sorted and dip at comparatively low angles towards the sea. These selection pavements form beds that, in section, can be >50 m in seaward length; they grow from clasts, supplied to them from swash or backwash, and which are selected by the fabric of the existing sheet. In some cases, the selection pavements can be very mature having only a specific clast shape and size remaining. Total preservation of the beach sequence in the geological record is more likely to take place in areas of rapid deposition of sediments, such as the marine fringes to a fan delta.     

Compositional variations and morphological evolution in platinum beach placers, southern New Zealand

Morphologies of placer platinum group minerals (PGM) are more variable and resistant to modification during transport than placer gold grains. This study documents morphological evolution of PGM placer grains during up to 120 km of transport in beach placers after river transport from inferred sources up to 200 km inland. PGM morphological changes are calibrated with changes in morphology of associated placer gold. Most of the PGM are Pt-Fe alloy and have been fed into the beach placer system from a large river at the western end of the beaches on the south coast of New Zealand. The incoming fluvial PGM suite includes Os, Ir and Ru alloys which may have been derived from distal ophiolitic sources. More proximal sources have Ural-Alaskan affinities and these contributed cooperite and braggite, or sperrylite, locally, as well as Pt-Fe alloy grains. Some PGM may have been recycled through Cretaceous-Quaternary fluvial sediments before entering the modern placer system. Recycled placer PGM grains have also been derived from elevated Quaternary beaches near the coastline. PGM grains entering beach placers have rough surfaces, with remnants of crystal faces, and these evolve to smooth flakes with progressive long-shore transport. PGM flakes have slightly thickened rims caused by impacts by saltating sand on windy beaches, and the most distal beach placers contain flakes with incipient toroidal shapes. These PGM incipient toroids are poorly developed compared to accompanying well-formed toroidal gold that has developed in nearly all beach placers, including those on elevated Quaternary beaches. Typical PGM and gold placer grain size decreases with increasing distance of transport, from fluvial grain size of 400–1,000 to ～200 microns on the most distal beaches, accompanied by eastward loss of equant PGM grains and associated increase in proportion of flakes. Although net transport distance is ～120 km in the beach placer complex, frequent aeolian transport of grains from beach to dunes and subsequent recycling by storm surges substantially increased total transport distance in a dynamic windy tectonic environment.     

An analysis of beach profile changes subsequent to the Colombo Harbor Expansion Project,Sri Lanka

Man-made coastal structures directly affect sediment balance and sediment dynamics on the surrounding beaches. The Colombo Harbor Expansion Project has created about 5-km-long breakwater nearly perpendicular to the beach. The present study is focused on quantitatively and qualitatively analyzing the effect of the Colombo Harbor Expansion Project on economically important beaches in and around Colombo city area. In this study, the authors measured monthly variations of beach width, beach profile and the mean grain-size of the sediments at mean sea level for complete annual monsoon cycle. Data were analyzed to establish site-specific erosion vulnerability. Monitoring results show that cumulative beach erosion has increased after the construction of the breakwater (rate = 0.7 m/year from May 2000 to April 2011 and rate = 28.2 m/year from April 2011 to June 2012). In addition, the cumulative and site-specific sand accretion and erosion patterns have a clear relationship with the monsoon seasonality. Beaches were narrower during the stormy southwestern monsoon, whereas beaches were wider during fair weather of northeast monsoon and inter-monsoon periods. In contrast, the constructed breakwater obstructs natural longshore sediment dynamics. For example, a significant amount of sediments from the Kelani-Ganga River were buried in the Colombo Harbor due to alteration of prominent longshore sediments transportation on the western coast of Sri Lanka. Therefore, this study shows enhancement of coastal erosion in the studied southern beaches due to a lack of sediment deposition.     

Short-term morphological change and sediment dynamics in the intertidal zone of a macrotidal beach

This paper describes the morphological and sedimentological evolution of a macrotidal beach over a 20 day period under varying hydrodynamic conditions (significant breaker heights of 0·3–2 m and tidal ranges of 2–5 m). During the field campaign, an intertidal bar developed around the mid‐tide level, migrated onshore, welded to the upper beach and was then flattened under energetic wave conditions. The bar had a wave breakpoint origin and its formation was triggered by a reduction in tidal range, causing more stationary water‐level conditions, rather than an increase in wave height. Most of the onshore bar migration took place while the bar was positioned in the inner to mid‐surf zone position, such that the bar moved away from the breakpoint and exhibited ‘divergent’ behaviour. The depth of disturbance over individual tidal cycles was 10–20% of the breaker height. Such values are more typical of steep reflective beaches, than gently sloping, dissipative beaches, and are considered to reflect the maximum height of wave‐generated ripples. The grain size distribution of surficial sediments did not vary consistently across the beach profile and temporal changes in the sedimentology were mostly unrelated to the morphological response. The lack of clear links between beach morphology and sedimentology may be in part due to shortcomings in the sampling methodology, which ignored the vertical variability in the sediment size characteristics across the active layer.     

Geological characteristics of 2011 Japan tsunami sediments deposited along the coast of southwestern Mexico

The tsunami of 11th March 2011 was originated at the east coast of Japan and deposited ca.1 cm thick sediment layer along the coast of southwestern Mexico up to a maximum distance of 320 m from the beach. The sedimentological, mineralogical and geochemical characteristics of the sediments deposited during the tsunami (JT) are compared with the pre-tsunami sediments (PRT). JT sediments consist of dominant coarser fractions (>54% of medium to coarse sand), whereas PRT deposits comprise abundant finer fractions (>58% of fine sand). Assemblage of mafic and heavy minerals suggests similar provenance for both. The higher abundance and variation of heavy minerals along with higher concentrations of bromine (Br) and sodium (Na) in the JT deposits reveal the influence of high energy sea waves in transportation of heavy mineral rich coarse sediments onto the coastal lowlands.     

Effects of shoreline modification on a Northern Puget Sound beach: Microclimate and embryo mortality in surt smelt (Hypomesus pretiosus)

Human alteration of Puget Sound shorelines is extensive yet its ecological consequences are largely undocumented. This study evaluates differences between natural and heavily modified beaches in terms of microclimate and one aspect of biological condition. Electronic data laggers were placed at a tidal height of approximately 3.7 m (12 ft) above mean lower low water during July 16–20, 2001, to monitor light intensity, substrate and air temperatures, and humidity. Substrate samples were collected at the end of the monitoring period to evaluate condition and density of eggs from surf smelt (Hypomesus pretiosus), a forage fish species that spawns on gravel-sand beaches in the upper intertidal zone. The modified beach had significantly higher daily mean light intensity, air temperature and substrate temperature, and significantly lower daily mean relative humidity. Particularly striking were the differences in substrate temperature which, on the natural beach, ranged from 12.1°C to 18.2°C (mean=14.1°C) and on the modified beach ranged from 14.4°C to 29.4°C (mean=18.8°C). In addition to these different means and more extreme values, microclimate conditions on the modified beach were more variable, indicative of a less buffered environment. The proportion of smelt eggs containing live embryos on the altered beach was approximately half that of the natural beach.     

克列斯特盆地布尔季加尔阶海相磨拉石沉积作用研究

本文根据岩相分布、化石组合、粒度、砂矿物、粘土矿物、指相元素以及岩石镜下特征等方面的分析,探讨了盆地布阶各相的沉积环境、物质来源等问题,确认它们为一套局限水体的三角洲-滨岸-滨外沉积,其陆源物质分别来自阿尔卑期变质岩系和区域内中生代沉积盖层;同时,恢复了盆地古地理概貌。