塔里木溢流玄武岩省的巨型长英质热火山碎屑流爆发记录

在塔里木盆地西北缘的柯坪地区二叠系库普库兹满组和开派兹雷克组玄武岩之间发现厚层长英质火山碎屑岩层序。该层序包括可见含交错层理的空落火山灰层、三层含增生火山砾的火山灰、熔结凝灰岩和再沉积熔结凝灰岩。层序下部为与其准同时喷发的玄武质火山碎屑岩和玄武质熔岩流。利用锆石U-Pb法确定熔结凝灰岩层的喷发年龄为290.9±1.3Ma(MSWD=1.12),该年龄限定了库普库兹满组玄武岩喷发的截止时间。长英质火山碎屑岩层序中的增生火山砾由粒度250μm的长英质玻屑组成,且长宽比均1.5。根据形貌、结构和岩相学特征,将增生火山砾分为三类,分别对应热火山碎屑流从起始(TypeⅡ,coated ash pellet)到极盛(TypeⅠ,accretionary lapillus)再逐渐衰弱(TypeⅢ,ash pellet)的过程。由于喷发规模巨大,该火山层序很可能广泛分布于盆地内,可能是确定全盆地溢流玄武岩喷发时限的一个关键标志层。     

塔里木溢流玄武岩的喷发特征

通过对柯坪地区二叠系野外火山岩露头剖面和英买力、哈拉哈塘井区二叠系火山岩钻井剖面的对比,将塔里木早二叠世溢流玄武岩划分为三个旋回,从老到新依次是:库普库兹满溢流玄武岩旋回(KP),长英质火山碎屑岩旋回(FP)和开派兹雷克溢流玄武岩旋回(KZ)。KP旋回以巨厚溢流玄武岩夹凝灰岩为特征,在柯坪露头区和英买力井区均可划分出三层巨厚玄武质熔岩流,至哈拉哈塘井区减少为一层玄武岩流,但长英质火山碎屑岩和熔岩厚度增加。FP旋回在柯坪露头区自下而上包括空落相凝灰岩,熔结凝灰岩,再沉积火山碎屑岩和正常碎屑岩夹火山灰层,该层可与英买力及哈拉哈塘井区的凝灰岩层对比,表明在塔北存在一期面积广泛的长英质火山喷发。KZ旋回以溢流玄武岩为主,在开派兹雷克剖面识别出四期喷发共8层溢流玄武岩和一期安山质玄武岩,每期喷发之间夹少量碎屑岩,但未见长英质火山碎屑岩夹层,该特征与英买力和哈拉哈塘井区的火山层序组合不同,而与塔中溢流玄武岩类似。三个火山旋回的划分表明塔里木大火成岩省经历了"基性溢流玄武岩-酸性火山碎屑岩-基性溢流玄武岩"的演变过程,与Afro-Arabian溢流玄武岩省相似,可进行对比研究。     

The Glueckstadt Graben of the North-German Basin: new insights into the structure from 3D and 2D gravity analyses

The structure of the Glueckstadt Graben has been investigated by use of 3D gravity backstripping technique and by 2D gravity and magnetic modelling. Subtracting the gravity effects of the Meso-Cenozoic sediments together with Permian salt reveals a positive residual anomaly within the Glueckstadt Graben. This anomaly includes two local maxima over the Westholstein and Eastholstein Troughs. The 2D gravity models point to the presence of a high-density body within the lower crust of the Glueckstadt Graben. In addition, the results of 2D magnetic modelling indicate that the central part of the high-density body is overlain by an area with high susceptibility. Most probable, the formation of this high-density body is a result of complex poly-phase tectonic history of the study area. Finally, the results of gravity modelling indicate that Permian salt is not homogeneous. 3D gravity analysis and, especially, 2D gravity modelling have distinguished the differences in degree of salt saturation in salt-rich bodies, and elucidate the proportion of Rotliegend salt.     

Paleodrainage and fault development in the southern Perth Basin,Western Australia during and after the breakup of Gondwana from 3D modelling of the Bunbury Basalt

The evolution of faults and paleodrainage patterns on the southwestern Australian passive margin during and after the breakup of Gondwana in the Early Cretaceous remains poorly understood. This contribution investigates the fault and paleodrainage evolution in the southern Perth Basin with the use of the ‘Bunbury Basalt’, the only lava flows known to be synchronous with continental breakup. New aeromagnetic data have been integrated with well intersections and outcrop constraints to establish the first 3D model of the Bunbury Basalt. The model reveals that flows are up to 100 m thick and are predominantly confined to two north–south-trending paleovalleys and their tributaries situated in the Bunbury Trough in the southern Perth Basin. The Donnybrook Paleovalley flow ponded in a paleovalley proximal to the Darling Fault and is truncated by the two later flows within the Bunbury Paleovalley, which is positioned centrally in the Bunbury Trough. Offsets of the Bunbury Basalt have been used to identify new northeast- and northwest-trending faults in the southern Perth Basin, and broad folding is interpreted as a consequence of drag into the Darling and Busselton faults. The model has been used to determine post-basalt net displacements for the Darling and Busselton faults of 370 and 210 m, respectively, and <175 m for the northeast and northwest-trending faults. The source vents for the Bunbury Basalt were probably located at extensional jogs at intersections between the Darling Fault and subordinate oblique faults. These results challenge the views on longstanding quiescence of the post-breakup western Australian passive margin.     

海拉尔盆地贝尔凹陷南部层间构造及岩性圈闭的三维地震解释

应用Landmark工作站SeisWorks地震解释和Geopmbe三维可视化模块,以构造、岩性圈闭识别和储层预测等技术为手段,对海拉尔盆地敖瑙海地区主要勘探目的层系内部的层间构造和岩性圈闭进行了精细解释.由已知井出发,确定层间构造的油层顶面位置并进行层位追踪.利用相干数据体以及相干体水平切片、相干体沿层切片技术对三维资料进行断层解释,最终编制出油层顶面构造图完成层间构造解释.利用Geoprobe三维可视化全方位浏览数据体、体透视、种子点追踪、层拉平及反拉平技术完成岩性圈闭解释.通过对层间构造和岩性圈闭进行精细刻画,为探井部署提供了可靠依据.经钻探,多口探井见到较好的油气显示并获工业油流,为贝中次凹提交6 73×104t石油预测储量奠定了坚实基础.     

基于机器学习的三维矿产定量预测——以四川拉拉铜矿为例

在大数据蓬勃发展的时代背景下,矿产资源定量预测作为地质大数据的核心部分,其综合分析挖掘多元信息的基本思路与大数据的理念不谋而合。以四川拉拉铜矿为例,开展基于机器学习的三维矿产资源定量预测。通过建立三维地质模型,提取成矿有利信息,构建研究区定量预测模型;基于"立方块预测模型"找矿方法,采用机器学习随机森林算法,计算出研究区成矿概率分布,以此圈定出5个找矿远景区。结果表明,随机森林具有更高的预测准确度与稳定性,且能够对控矿要素重要性做出定量评价。该研究成功地将机器学习应用于三维矿产定量预测,为今后的矿产资源预测评价做出了积极的探索。     

Evolution and structure of the Upper Rhine Graben: insights from three-dimensional thermomechanical modelling

The evolution and geometry of the Tertiary Upper Rhine Graben were controlled by a continually changing stress field and the reactivation of pre-existing crustal discontinuities. A period of WNW-ESE extension in the late Eocene and Oligocene was followed by lateral translation from the early Miocene onwards. This study utilizes 3D finite element techniques to simulate extension and lateral translation on a lithospheric scale. Brittle and creep behaviour of lithospheric rocks are represented by elastoplasticity and thermally activated power-law viscoplasticity, respectively. Contact elements allocated with cohesion and frictional coefficients are used to describe pre-existing zones of weakness in the elastic-brittle field. Our results suggest that (1) extension is accommodated along listric border faults to midcrustal depth of 15–16 km. Beneath, pure shear stretching occurs without a need for localized shear zones in lower crust and upper mantle. (2) Ductile flow at midcrustal depth across the graben accounts for the pronounced halfgraben morphology. Thereby, the shape of the border faults, their frictional coefficients, and sedimentary loads have profound effects on the rate of ductile flow across the graben. (3) Horizontal extension of 8–8.5 km and sinistral displacement across the rift of 3–4 km are needed to accommodate the observed sediment thickness.     

基于构造地球化学异常的金矿床蚀变带深部推断三维建模—以山东夏甸金矿为例

随着三维地质建模技术的发展,构建能定量表达地质体特征的可视化三维模型已成为重要的研究方向。已有地质钻探资料难以对研究区深部全面覆盖,因此难以定量描述蚀变带的深部特征,也无法获得蚀变带三维建模的关键形态参数。针对该问题,提出了一种通过地表的构造地球化学异常来推断蚀变带三维建模的关键形态参数——蚀变带中心深度和厚度的方法,并设计一种蚀变强度定量表达和蚀变带内部结构模拟算法来实现蚀变带内部结构的定量化表达。该方法在同等化探异常级别的条件下,以化探与钻探重叠区蚀变带中心深度和厚度构建蚀变带深度-厚度的映射模型,进而提供参数来构建蚀变带三维形态模型,并基于此模型实现蚀变带内部"强蚀变单元"和"非强蚀变单元"的分布模拟,最后获取蚀变带内部所有单元的定量化蚀变强度。将该方法应用于山东夏甸金矿,证明构造地球化学异常能够为金矿蚀变带深部推断三维建模提供数据支持。     

基坑开挖对涉支护结构下穿盾构隧道变形的三维模拟与影响规律研究

依托某大厦基坑支护工程项目,研究深厚软土地层中基坑开挖对涉支护结构下穿盾构隧道变形的影响规律。采用三维有限元数值模拟分析隧道顶部支护桩的长度对支护结构变形和隧道隆起的影响,并将数值模拟结果与现场监测结果进行对比。结果表明：深厚软土地层中基坑开挖对下穿盾构隧道产生了较大的隆起变形;因下穿隧道的影响,隧道顶部支护桩嵌固深度的减小对支护结构的变形和下穿隧道的隆起会产生重要影响,当支护桩底与隧道顶的竖向间距S＞4 m或支护桩边缘与隧道边缘的水平间距S1＞4 m 时,支护桩的踢脚位移和下穿隧道的隆起变形迅速增加。研究成果可为类似工程提供应用参考和理论支撑。     

基于先验信息约束的重磁电联合三维交互反演技术实践——以彭山穹隆构造为例

三维地质建模是实现深部矿产勘查突破的重要途径,其通过控矿地质体的三维建模,直观刻画控矿要素之间的空间、成因和演化关系,帮助理解成矿系统,开展深部找矿预测.当前三维建模主要采用地质资料构建,在缺少钻孔等已知资料的情况下,难于构建出可靠的三维地质模型.为了克服常规三维地质建模方法可信度低、精度差的缺点,本文将重磁电交互反演...     

油气运聚影响下三维地震精细解译的砂岩型铀矿控矿因素分析——以松辽盆地大庆长垣南端铀矿为例

松辽盆地大庆长垣隆起区砂岩型铀矿资源丰富,但成矿条件复杂。以大庆长垣南端四方台组砂岩型铀矿为研究对象,基于三维地震精细解译成果,对长垣隆起区铀矿的分布特征、富集主控因素及成矿模式开展研究。结果表明：①三维地震资料是刻画断层与砂体分布的有效手段;②砂岩型铀矿主要富集在四方台组一段的河道砂体中,与沟通深部油气储层的输导断层邻近;③河道砂体、油气输导断层及油气圈闭是控制砂岩型铀矿富集的3个主要因素;④长垣隆起区的砂岩型铀矿是含铀地下水与油气运聚协调配合局部富集的结果,建立了输导断层与油气圈闭联合控矿模式。研究成果为含油气盆地砂岩型铀矿勘探提供了新的思路。