Fluid-driven seismicity in relatively stable continental regions:Insights from the February 3~(rd), 2020 M_S5.1 Qingbaijiang isolated earthquake

On February 3~(rd), 2020, an isolated M_S5.1 earthquake occurred in the northern section of the Longquanshan fault zone. This study aims at defining the geometry of seismogenic structures of this earthquake. In detail, centroid moment tensor inversion results show that the earthquake is characterized by a focal depth of 3.8 km with no corresponding surface faults. The strike/dip/rake angles for the two nodal planes are 205°/54°/96° and 15°/36°/82°, respectively. With the analyses of coseismic deformation of the surface obtained from InSAR measurements, together with the information of relocated hypocenters for a small number of aftershocks, it is concluded that a northwest-dipping nodal plane corresponds well to the source fault. The fault is suggested to have a length of about 2.8 km and a depth range of 2–5 km, and the centroid of the earthquake is located at 104.48°E and 30.71°N. Furthermore, multiple pieces of evidence indicate that this earthquake is partly driven by the overpressure effect associated with the adjacent natural gas packets, which is similar to several other moderate natural earthquakes in Sichuan Basin.     

Preliminary analysis on the source properties and seismogenic structure of the 2017 M_s7.0 Jiuzhaigou earthquake

At GMT time 13:19, August 8, 2017, an Ms7.0 earthquake struck the Jiuzhaigou region in Sichuan Province, China,causing severe damages and casualties. To investigate the source properties, seismogenic structures, and seismic hazards, we systematically analyzed the tectonic environment, crustal velocity structure in the source region, source parameters and rupture process, Coulomb failure stress changes, and 3-D features of the rupture plane of the Jiuzhaigou earthquake. Our results indicate the following:(1) The Jiuzhaigou earthquake occurred on an unmarked fault belonging to the transition zone of the east Kunlun fault system and is located northwest of the Huya fault.(2) Both the mainshock and aftershock rupture zones are located in a region where crustal seismic velocity changes dramatically. Southeast to the source region, shear wave velocity at the middle to lower crust is significantly low, but it rapidly increases northeastward and lies close to the background velocity across the rupture fault.(3) The aftershock zone is narrow and distributes along the northwest-southeast trend, and most aftershocks occur within a depth range of 5–20 km.(4) The focal mechanism of the Jiuzhaigou earthquake indicates a left-lateral strike-slip fault, with strike, dip, and rake angles of 152°, 74° and 8°, respectively. The hypocenter depth measures 20 km, whereas the centroid depth is about 6 km. The co-seismic rupture mainly concentrates at depths of 3–13 km, with a moment magnitude(M_w) of 6.5.(5) The co-seismic rupture also strengthens the Coulomb failure stress at the two ends of the rupture fault and the east segment of the Tazang fault. Aftershocks relocation results together with geological surveys indicate that the causative fault is a near vertical fault with notable spatial variations: dip angle varies within 66°–89° from northwest to southeast and the average dip angle measures ~84°. The results of this work are of fundamental importance for further studies on the source characteristics, tectonic environment, and seismic hazard evaluation of the Jiuzhaigou earthquake.     

Relocation of the MS5.7 Earthquake Sequence in Songyuan, Jilin Province, 2018 and the Analysis of Its Seismogenic Structure

The 2018,Songyuan,Jilin M_S5. 7 earthquake occurred at the intersection of the FuyuZhaodong fault and the Second Songhua River fault. The moment magnitude of this earthquake is M_W5. 3,the centroid depth by the waveform fitting is 12 km,and it is a strike-slip type event. In this paper,with the seismic phase data provided by the China Earthquake Network, the double-difference location method is used to relocate the earthquake sequence,finally the relocation results of 60 earthquakes are obtained. The results show that the aftershock zone is about 4. 3km long and 3. 1km wide,which is distributed in the NE direction. The depth distribution of the seismic sequence is 9km-10 km. 1-2 days after the main shock,the aftershocks were scattered throughout the aftershock zone,and the largest aftershock occurred in the northeastern part of the aftershock zone. After 3-8 days,the aftershocks mainly occurred in the southwestern part of the aftershock zone. The profile distribution of the earthquake sequence shows that the fault plane dips to the southeast with the dip angle of about 75°. Combined with the regional tectonic setting,focal mechanism solution and intensity distribution,we conclude that the concealed fault of the Fuyu-Zhaodong fault is the seismogenic fault of the Songyuan M_S5. 7 earthquake. This paper also relocates the earthquake sequence of the previous magnitude 5. 0 earthquake in 2017. Combined with the results of the focal mechanism solution,we believe that the two earthquakes have the same seismogenic structure,and the earthquake sequence generally develops to the southwest. The historical seismic activity since 2009 shows that after the magnitude 5. 0 earthquake in 2017,the frequency and intensity of earthquakes in the earthquake zone are obviously enhanced,and attention should be paid to the development of seismic activity in the southwest direction of the earthquake zone.     

2012年6月30日新疆新源-和静MS6.6地震序列震源机制解?

In this article,we use the CAP method to invert the focal mechanism of Xinyuan-Hejing M S6. 6 earthquake on June 30,2012. Our result shows that the best double couple solution of the M S6. 6 event is 299°,68° and 164° for strike,dip and rake angles respectively. The other nodal plane is 35°,75° and 23°. The azimuth and dip angle of the P-axis are 166°and 5°,those of the T-axis are 258° and 26°. The moment magnitude is 6. 3. The estimated focal depth is about 21 km. The predominant rupture direction of this seismic sequence is NWW. The dip angles are between 60° and 90°. The rake angles are in the majority of ± 180°± 30°. The predominant strike of the azimuthal angle of the P-axis is near NS and T-axis is near EW. Preliminary analysis indicates that nodal plane I is the seismogenic fault,which is a NWW-trending,nearly upright left-lateral strike-slip fault.The displacement property,the principal compressive stress of this M S6. 6 earthquake and the P-axis preponderant orientation of this seismic sequence agree with the characteristics of the tectonic stress field of the focal area and its surroundings.     

Fault plane parameters of Tancheng M81/2 earthquake on the basis of present-day seismological data

The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China.This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area.We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method.The inversion results are as follows:the strike is 21.6°,the dip angle is 89.5°,the slip angle is 170°,the fault length is about 160 km,the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km.This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust.Moreover,the surface seismic fault,intensity distribution of the earthquake,earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.     

Scaling of Reduced Energy or Apparent Stress and Its Seismological Significance

Comparison between the NEIC broadband radiated energy catalogue and the Harvard CMT catalogue provides information about apparent stres.In spite of its significant uncertainties and limited relability, the clues obtained from this comparison seem interestiin in the physics of earthquakes.Scaling of apparent stress provides information about the dynamic friction along an earthquake fault.Relation between reduced energy and seismic moment implies that for strike-slip earthquakes,velocity-dependent friction plays a predominant role,while for non-strike-slip earthquakes,slip-dependent friction is predominant.It is also found that strike-slip events with extremely low apparent stress tend to occur“in single”,which is applied to the prediction of the seismic tendency following the 2001 Qinghai-Xizang(Tibet) borderMW7.8 earthquake.     

Focal Mechanism Solution of the February 23,2014,M_L3.8 Rongchang Earthquake with the CAP (Cut and Paste) Method

A M_L3.8 earthquake occurred on February 23,2014 in Rongchang County,which is located at the southern edge of the Sichuan Basin in the border area between Sichuan and Chongqing. This paper presents results of focal mechanism solution of this earthquake using the CAP( cut and paste) method based on broadband seismograms recorded by regional seismic stations. Our results show that the moment magnitude is M_W3. 09 and focal depth is 3km. The hypocenter of this earthquake is located close to a buried fault in the Luoguangshan anticline. Oil prospecting and deep drilling data indicate that this buried fault is a thrust fault,striking SW230°,dipping NW45°,and 1. 7km deep. There are some injection wells within the anticline,and significant injection-induced earthquakes were observed during the periods of injection of waste water into the deep formations through those wells. The best double couple solution of the M_L3.8 earthquake is 247°,48°and 104° for strike,dip and rate,respectively,for one nodal plane( and 46°,44° and 74°for another nodal plane),which is in agreement with the geometry of the buried fault.Therefore,we conclude that the M_L3.8 Rongchang earthquake is possibly the result of faulting along the buried reverse fault induced by water injection under the compressive stress regime in the area.     

Self-centering seismic retrofit scheme for reinforced concrete frame structures: SDOF system study

This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.     

Relocation of the Jinghe MS6.6 Earthquake Sequence on August 9, 2017 and Analysis of the Seismogenic Structure

Based on the digital waveforms of the Xinjiang Digital Seismic Network,the Jinghe M_S6.6 earthquake sequence( M_L≥1. 0) were relocated by HypoDD,The characteristics of the spatial distribution and the seismogenic structure of this earthquake sequence were analyzed. The results show that the main shock is relocated at 44. 2639° N,82. 8294° E,and the initial rupture depth is 17. 6 km. The earthquake sequence clearly demonstrates a unilateral extension of about 20 km in the EW direction,and is mainly located at a depth of 7km-17 km. The depth profile along the aftershock direction shows that the focal depth of aftershocks tend to be shallower within 10 km to the west of the main shock,the focal depth of the aftershock sequence with the tail direction deflecting SW is deeper. The depth profile perpendicular to the earthquake sequence shows a gradual deepening of the seismic sequence from north to south,which indicates that the fault plane is dipping south.According to the focal mechanism solution,given by the Institute of Geophysics,China Earthquake Administration,and the geological structure of the seismic source region,it is inferred that the seismogenic structure of the Jinghe M_S 6.6 earthquake may be the eastern segment of the Kusongmuxieke fault.     

Fault geometrical model of Dujiangyan section in Longmenshan fault zone

The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°.     

琼中地震台重力仪记录同震响应特征分析

2013年2月6-8日圣克鲁斯群岛发生6次强震,琼中地震台的重力仪记录都有同震响应出现。本文从重力仪记录的面波的延迟时间、最大变形幅度、同震持续时间3个方面研究了6次强震的同震响应特征。     

On the Mechanism of the Secular Tidal Acceleration of the Solid Inner Core and the Viscosity of the Liquid Core

As is known, the secular deceleration of the Earth's diurnal rotation is explained mainly by the tidal friction in the ocean. Below we consider this mechanism in some detail, taking into account also elastic deformations of the mantle under the action of ocean loading and the interaction between the tide-generating body, ocean tidal wave, liquid outer core, and solid inner core. It is shown that elastic displacements of the core-mantle boundary under the action of ocean loading are of about the same amplitude and phase as the elastic loading displacements of the Earth's outer surface. As a result, side by side with the mechanism of secular deceleration of diurnal rotation of the mantle, there are also (1) the opposite mechanism of secular acceleration of diurnal rotation of the outer liquid core and of the solid inner core and (2) the mechanism of excitation of differential rotation in the liquid core. Taking these effects into account, we compare theoretical and modern observed data on the eastward drift of the solid inner core. It is shown that the best agreement may be obtained if the turbulent viscosity of the liquid core is about 2 × 10 ³ Poise     

Comparison Between the Nutations of the Planet Mars and the Nutations of the Earth

The nutations of the planets Mars andEarth are investigated and compared. Alarge number of interior structureparameters are involved in the nutationcomputations. The comparison between the observations and the computationsprovides several constraints on these parmeters andtherefore allows a better understanding of the physics of the interior of theplanet. For the Earth, the high precision of the observations of the nutationshas led to a very good determination of interior properties of the planet. ForMars, observations of nutations are not yet available, and we review how theamplitude of the Martian nutations depends on the hypotheses consideredfor its interior. Although Mars is very similar to the Earth, its interior is not well known;for example, we don't knowif its core is liquid or solid. Only if the core is liquid,the Free Core Nutation (FCN) normal mode exists and can alter the nutationswhich are close to the resonance. From the observed geoids, it is known thatboth planets are not in hydrostatic equilibrium. The departure is larger forMars than for the Earth, and consequently, the implication of considering a convective mantle instead of a mantle in hydrostatic equilibrium described byClairaut's equation for the initial equilibrium state of the planet is largeron the Martian nutations than on the Earth nutations. The consequences of theuncertainty in the core dimensions are also examined and shown to be of a veryhigh influence for Mars if the core is liquid, due to the potential changes inthe FCN resonance. The influence of the presence of an inner core, which isknown to exist for the Earth, could be more important for Mars than for theEarth if the inner core is large. Due to the presence of Tharsis on Mars, thetriaxiality of this planet has, additionally, larger effects than on Earth.     

Contribution to the knowledge of the magmatic evolution by the study of the variation of the coefficient of viscosity

The determination of the coefficient of viscosity of eruptive products gives useful elements to the knowledge of possible variations of composition and physical conditions of the magmas.     

动水压力对深水桥墩地震响应影响的研究综述

地震激励下处于深水中的桥墩和周围水体的相互作用将对桥梁结构的动力响应产生较大影响。首先对地震作用下水-桥墩的相互作用理论做了概括,给出了动水压力对桥墩的作用效应及各自的适用范围;对主要的三种考虑流固耦合效应的分析方法做了对比,探讨了地震作用下影响水-结构相互作用的主要因素,并对今后的研究提出了建议。     

Pictorial Series of the Manifestations of the Dynamics of the Earth

Studia Geophysica et Geodaetica -     

Magnetic stratigraphy of the Ordovician in the lower reach of the Kotuy River: the age of the Bysy-Yuryakh stratum and the rate of geomagnetic reversals on the eve of the superchron

Until recently, the existing data prevented the geophysicists from accurately dating the Bysy-Yuryakh stratum, which outcrops in the middle reach of the Kotuy River, constraining the time of its formation to a wide interval from the end of the Late Cambrian to the beginning of the Silurian. The obtained paleomagnetic data unambiguously correlate the Bysy-Yuryakh stratum to the Nyaian regional stage and constrain its formation, at least a considerable part of it, by the Tremadocian. This result perfectly agrees with the data on the Bysy-Yuryakh conodonts studied in this work and yields a spectacular example of the successful application of paleomagnetic studies in solving important tasks of stratigraphy and, correspondingly, petroleum geology. Within the Bysy-Yuryakh stratum, we revealed a large normal-polarity interval corresponding to the long (>1 Ma) period when the geomagnetic reversals were absent. This result, in combination with the data for the Tremadocian and Middle–Upper Cambrian sequences of the other regions, indicates that (1) the rate of occurrence of the geomagnetic reversals on the eve of the Ordovician Moyero superchron of reversed polarity was at most one reversal per Ma; (2) the superchron does not switch on instantaneously but is preceded by a certain gradual change in the operation conditions of the dynamo mechanism which, inter alia, manifests itself by the reduction of the frequency of geomagnetic reversals with the approach of the superchron. This finding supports the views according to which a process preparing the establishment of the superchrons takes place at the core–mantle boundary.     

Evolution of the Source of the Active Region of the Sun

Geomagnetism and Aeronomy - The magnetic evolution of the active region of the Sun at the level of the photosphere has been studied. Magnetic synoptic maps of the 2007 Kitt Peak Observatory were...     

On the solution of the reverse problem of geodesics with the help of the chord

Резюме Дается вывод формул для вычислений длины хорды, длины и азимутов нормаляных сечений и длины геодезической линии эллипсоида. Применяются тригонометрические функции данных величин и постоянные принятого ргфгргнц-эллипсоида, что является целесообразным при использовании вычислителQjных машин, особенно автоматов. Рабочие формулы рекомендуются в форме (8–11).

---

---

Dedicated to Professor František Fiala on His 85th Birthday

---

Address: Veveři 95, Brno.