Structures and stabilities of Cd(II) and Cd(II)-phthalate complexes at the goethite/water interface

The complexation of Cd(II) and Cd(II)-phthalate at the goethite/water interface were investigated by EXAFS and IR spectroscopy, by batch adsorption experiments and by potentiometric titrations at 298.15 K. The EXAFS spectra showed Cd(II) to form only inner-sphere corner-sharing complexes with the goethite surface sites in the presence and absence of phthalate. EXAFS spectra also showed the presence of Cd(II)-chloride complexes in 0.1 mol/L NaCl. IR spectra also showed phthalate to form (1) an inner-sphere complex with adsorbed corner-sharing Cd(II) surface complexes in the pH 3.5 to 9.5 and (2) an outer-sphere complex with the same type of corner-sharing Cd(II) complex however at pH > 6, in addition to the inner- and outer-sphere complexes of phthalate reported in a previous study. The potentiometric titration and the batch adsorption data were used to constrain the formation constants of the different Cd(II)-phthalate surface complexes on the dominant {110} and the {001} planes of the goethite. The models were carried out with the Charge Distribution Multisite Complexation model coupled to the Three Plane Model and can predict the molecular-scale speciation of cadmium and phthalate in the presence of goethite. Cd(II) adsorption models calibrated on a 90 m²/g goethite also could accurately predict experimental data for a 37 m²/g goethite of slightly different basic charging properties.     

Adsorption of hydroxamate siderophores and EDTA on goethite in the presence of the surfactant sodium dodecyl sulfate

Siderophore-promoted iron acquisition by microorganisms usually occurs in the presence of other organic molecules, including biosurfactants. We have investigated the influence of the anionic surfactant sodium dodecyl sulfate (SDS) on the adsorption of the siderophores DFOB (cationic) and DFOD (neutral) and the ligand EDTA (anionic) onto goethite (α-FeOOH) at pH 6. We also studied the adsorption of the corresponding 1:1 Fe(III)-ligand complexes, which are products of the dissolution process. Adsorption of the two free siderophores increased in a similar fashion with increasing SDS concentration, despite their difference in molecule charge. In contrast, SDS had little effect on the adsorption of EDTA. Adsorption of the Fe-DFOB and Fe-DFOD complexes also increased with increasing SDS concentrations, while adsorption of Fe-EDTA decreased. Our results suggest that hydrophobic interactions between adsorbed surfactants and siderophores are more important than electrostatic interactions. However, for strongly hydrophilic molecules, such as EDTA and its iron complex, the influence of SDS on their adsorption seems to depend on their tendency to form inner-sphere or outer-sphere surface complexes. Our results demonstrate that surfactants have a strong influence on the adsorption of siderophores to Fe oxides, which has important implications for siderophore-promoted dissolution of iron oxides and biological iron acquisition.     

Studies of Cd(II)-sulfate interactions at the goethite-water interface by ATR-FTIR spectroscopy

A combination of macroscopic experiments and in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy was used to study Cd(II)-sulfate interactions on the goethite-water interface. The presence of SO₄ dramatically promoted Cd adsorption at lower pH (pH 5.5-6.5) and had a smaller effect at higher pH. ATR-FTIR studies indicated sulfate adsorption on goethite occurred via both outer- and inner-sphere complexation. The relative importance of both complexes was a function of pH and sulfate concentration. ATR-FTIR spectra provided direct evidence of the formation of Cd-SO₄ ternary surface complexes on goethite. In addition to ternary complexes, Cd specifically sorbed on goethite promoted SO₄ adsorption via changing the surface charge, and caused additional SO₄ adsorption as both inner- and outer-sphere complexes. The relative importance of ternary complexes versus electrostatic effects depended upon pH values and Cd concentration. Ternary complex formation was promoted by low pH and high Cd levels, whereas electrostatic effects were more pronounced at high pH and low Cd levels. A portion of SO₄ initially sorbed in inner-sphere complexes in the absence of Cd was transformed into Cd-SO₄ ternary complexes with increased Cd concentration.     

Adsorption of oxalate and malonate at the water-goethite interface: Molecular surface speciation from IR spectroscopy

The adsorption of oxalate and malonate at the water-goethite interface was studied as a function of pH and total ligand concentrations by means of quantitative adsorption measurements and attenuated total reflectance Fourier transform infrared spectroscopy. The obtained results conclusively showed that oxalate and malonate both form outer-sphere and inner-sphere surface complexes on goethite, and that these complexes coexist over a broad pH interval. The inner-sphere complexes were favored by low pH, while the relative concentrations of the outer-sphere species increase with increasing pH. Based on comparisons with model complexes characterized by Extended X-Ray Adsorption Fine Structure (EXAFS) and results from theoretical frequency calculations, the structures of the inner-sphere complexes of oxalate and malonate were best described as mononuclear five- and six-membered ring chelate structures, respectively. The stability of the inner-sphere complexes followed the trend expected from solutions studies, with the oxalate five-membered ring yielding the more stable complexes compared to the six-membered ring of malonate. The increased stability of the inner-sphere complex of oxalate was manifested in a greater extent of adsorption at acidic pH values. Despite the fact that significant amounts of oxalate and malonate inner-sphere surface complexes were formed, no ligand-promoted dissolution was observed at the experimental conditions in the study.     

Competitive sorption of copper and lead at the oxide-water interface: Implications for surface site density

The competitive sorption of Cu(II) and Pb(II) to colloidal hematite was investigated as a function of pH and total metal concentration. Acid–base titrations of the hematite and single-metal sorption experiments for Cu and Pb at low to medium surface coverages were used to calibrate two surface complexation models, the triple layer model, and a 2-pK basic Stern model with ion-pair formation. The surface site density was systematically varied from 2 to 20 sites/nm². Three different metal surface complexes were considered: (1) an inner-sphere metal complex; (2) an outer-sphere metal complex; and (3) an outer-sphere complex of singly hydrolyzed metal cations. Both models provided excellent fits to acid–base titration and single-metal sorption data, regardless of the surface site density used. With increasing site density, ΔpK of the stability constants for protonation reactions increased and metal surface complexes decreased steadily. The calibrated models based on different site densities were used to predict competitive sorption effects between Cu and Pb and single-metal sorption at higher total metal concentrations. Precipitation of oversaturated solid phases was included in the calculations. Best predictions of competitive sorption effects were obtained with surface site densities between 5 and 10 sites/nm². The results demonstrate that surface site density is a key parameter if surface complexation models are exposed to more complex, multicomponent environments. We conclude that competitive metal sorption experiments can be used to obtain additional information about the relevant surface site density of oxide mineral surfaces.     

Kinetics of zinc and arsenate co-sorption at the goethite-water interface

Little or no information is available in the literature about reaction processes of co-sorbing metals and arsenate [As(V)] on variable-charged surfaces or factors influencing these reactions. Arsenic and metal contamination are, however, a common co-occurrence in many contaminated environments. In this study, we investigated the co-sorption kinetics of 250 μM As(V) and zinc [Zn(II)] in 10, 100, and 1000 mg goethite L⁻¹ 0.01 M NaCl solution at pH 7, collected complementary As and Zn K-edge extended X-ray absorption fine structure (EXAFS) data after various aging times, and performed a replenishment desorption/dissolution study at pH 4 and 5.5 after 6 months of aging time. Arsenate and Zn(II) formed adamite-like and koritnigite-like precipitates on goethite in 100- and 10-ppm goethite suspensions, respectively, whereas in 1000-ppm goethite suspensions, As(V) formed mostly double-corner sharing complexes and Zn(II) formed a solid solution on goethite according to EXAFS spectroscopic analyses. In all goethite suspension densities, surface adsorption reactions were part of the initial reaction processes. In 10- and 100-ppm goethite suspensions, a heterogeneous nucleation reaction occurred in which adamite-like precipitates began to form 48 h earlier than koritnigite-like surface precipitates. Arsenate and Zn(II) uptake from solution decreased after 4 weeks. Replenishment desorption studies showed that the precipitates and surface adsorbed complexes on goethite were susceptible to proton-promoted dissolution resulting in many cases in more than 80% loss of Zn(II) and ∼ 60% to 70% loss of arsenate. The molar Zn:As dissolution ratio was dependent on the structure of the precipitate and was cyclic for the adamite and koritnigite-like surface precipitates, reflecting the concentric and plane-layered structures of adamite and koritnigite, respectively.     

Simultaneous inner- and outer-sphere arsenate adsorption on corundum and hematite

The ability to predict the fate and transport of arsenic in aquatic environments, its impact on water quality and human health, and the performance and cost-effectiveness of water treatment systems relies on understanding how it interacts with solid surfaces. In situ resonant surface X-ray scattering measurements of arsenate adsorption at pH 5 in 0.01 M NaCl on corundum and hematite (012) surfaces demonstrate that arsenate surface complexation is unexpectedly bimodal, adsorbing simultaneously as inner- and outer-sphere species. In addition, this bimodal behavior is found to be independent of the total arsenate solution concentration, and thus surface coverage, over the range of 10⁻⁶ to 10⁻³ M. Alternative mechanisms to produce the observed As distributions, such as arsenate dimerization or surface precipitation of an aluminum or ferric arsenate, are inconsistent with the experimentally-determined total and As-specific density profiles. Based on the location of the outer-sphere arsenate in relation to the surfaces studied, possible binding mechanisms include electrostatic attraction, hydrogen bonding to surface oxygen functional group, and configurational stabilization by interfacial water. Although the observation of outer-sphere arsenate surface complexes on a metal oxide surface is unprecedented, it is unclear if such species were absent in previous molecular-scale studies, as it is difficult for methods commonly used to investigate the mechanisms of arsenate adsorption to conclusively identify or rule out the presence of outer-sphere species when inner-sphere species are also present.     

Adsorption of organic matter at mineral/water interfaces: I. ATR-FTIR spectroscopic and quantum chemical study of oxalate adsorbed at boehmite/water and corundum/water interfaces

The types and structures of adsorption complexes formed by oxalate at boehmite (γ-AlOOH)/water and corundum (α-Al₂O₃)/water interfaces were determined using in situ attenuated total reflectance fourier transform infrared (ATR-FTIR) spectroscopy and quantum chemical simulation methods. At pH 5.1, at least four different oxalate species were found at or near the boehmite/water interface for oxalate surface coverages (Γ_ox) ranging from 0.25 to 16.44 μmol/m². At relatively low coverages (Γ_ox < 2.47), strongly adsorbed inner-sphere oxalate species (IR peaks at 1286, 1418, 1700, and 1720 cm⁻¹) replace weakly adsorbed carbonate species, and a small proportion of oxalate anions are adsorbed in an outer-sphere mode (IR peaks at 1314 and 1591 cm⁻¹). IR peaks indicative of inner-sphere adsorbed oxalate are also observed for oxalate at the corundum/water interface at Γ_ox = 1.4 μmol/m². With increasing oxalate concentration (Γ_ox > 2.47 μmol/m²), the boehmite surface binding sites for inner-sphere adsorbed oxalate become saturated, and excess oxalate ions are present dominantly as aqueous species (IR peaks at 1309 and 1571 cm⁻¹). In addition to these adsorption processes, oxalate-promoted dissolution of boehmite following inner-sphere oxalate adsorption becomes increasingly pronounced with increasing Γ_ox and results in an aqueous Al(III)-oxalate species, as indicated by shifted IR peaks (1286 → 1297 cm⁻¹ and 1418 → 1408 cm⁻¹). At pH 2.5, no outer-sphere adsorbed oxalate or aqueous oxalate species were observed. The similarity of adsorbed oxalate spectral features at pH 2.5 and 5.1 implies that the adsorption mechanism of aqueous HOx⁻ species involves loss of protons from this species during the ligand-exchange reaction. As a consequence, adsorbed inner-sphere oxalate and aqueous Al(III)-oxalate complexes formed at pH 2.5 have coordination geometries very similar to those formed at pH 5.1.The coordination geometry of inner-sphere adsorbed oxalate species was also predicted using quantum chemical geometry optimization and IR vibrational frequency calculations. Geometry-optimized Al₈O₁₂ and Al₁₄O₂₂ clusters with the reactive surface Al site coordinated by three oxygens were used as model substrates for corundum and boehmite surfaces. Among the models considered, calculated IR frequencies based on a bidentate side-on structure with a 5-membered ring agree best with the observed frequencies for boehmite/oxalate/water samples at Γ_ox = 0.25 to 16.44 μmol/m² and pH 2.5 and 5.1, and for a corundum/oxalate/water sample at Γ_ox = 1.4 μmol/m² and pH 5.1. Based on these results, we suggest that oxalate bonding on boehmite and corundum surfaces results in 5-coordinated rather than 4- or 6-coordinated Al surface sites.     

Effect of hydroxamate siderophores on Fe release and Pb(II) adsorption by goethite

Hydroxamate siderophores are biologically-synthesized, Fe(III)-specific ligands which are common in soil environments. In this paper, we report an investigation of their adsorption by the iron oxyhydroxide, goethite; their influence on goethite dissolution kinetics; and their ability to affect Pb(II) adsorption by the goethite surface. The siderophores used were desferrioxamine B (DFO-B), a fungal siderophore, and desferrioxamine D₁, an acetyl derivative of DFO-B (DFO-D1). Siderophore adsorption isotherms yielded maximum surface concentrations of 1.5 (DFO-B) or 3.5 (DFO-D1) μmol/g at pH 6.6, whereas adsorption envelopes showed either cation-like (DFO-B) or ligand-like (DFO-D1) behavior. Above pH 8, the adsorbed concentrations of both siderophores were similar. The dissolution rate of goethite in the presence of 240 μM DFO-B or DFO-D1 was 0.02 or 0.17 μmol/g hr, respectively. Comparison of these results with related literature data on the reactions between goethite and acetohydroxamic acid, a monohydroxamate ligand, suggested that the three hydroxamate groups in DFO-D1 coordinate to Fe(III) surface sites relatively independently. The results also demonstrated a significant depleting effect of 240 μM DFO-B or DFO-D1 on Pb(II) adsorption by goethite at pH > 6.5, but there was no effect of adsorbed Pb(II) on the goethite dissolution rate.     

ATR-FTIR spectroscopic study of the adsorption of desferrioxamine B and aerobactin to the surface of lepidocrocite (γ-FeOOH)

The adsorption of two model siderophores, desferrioxamine B (DFOB) and aerobactin, to lepidocrocite (γ-FeOOH) was investigated by attenuated total reflection infrared spectroscopy (ATR-FTIR). The adsorption of DFOB was investigated between pH 4.0 and 10.6. The spectra of adsorbed DFOB indicated that two to three hydroxamic acid groups of adsorbed DFOB were deprotonated in the pH range 4.0-8.2. Deprotonation of hydroxamic acid groups of adsorbed DFOB at pH values well below the first acid dissociation constant of solution DFOB species (pK_a = 8.3) and well below the point of zero charge of lepidocrocite (pH_PZC = 7.4) suggested that the surface speciation at the lower end of this pH range (pH 4) is dominated by a surface DFOB species with inner-sphere coordination of two to three hydroxamic acids groups to the surface. Maximum adsorption of DFOB occurred at approximately pH 8.6, close to the first pK_a value of the hydroxamic acid groups, and decreased at lower and higher pH values.The spectra of adsorbed aerobactin in the pH range 3-9 indicated at least three different surface species. Due to the small spectral contributions of the hydroxamic acid groups of aerobactin, the interactions of these functional groups with the surface could not be resolved. At high pH, the spectral similarity of adsorbed aerobactin with free aerobactin deprotonated at the carboxylic acid groups indicated outer-sphere complexation of the carboxylate groups. With decreasing pH, a significant peak shift of the asymmetric carboxylate stretch vibration was observed. This finding suggested that the (lateral) carboxylic acid groups are coordinated to the surface either as inner-sphere complexes or as outer-sphere complexes that are strongly stabilized at the surface by hydrogen bonding at low pH.     

Adsorption of monocarboxylates at the water/goethite interface: The importance of hydrogen bonding

The adsorption of monocarboxylates (acetate, benzoate, and cyclohexanecarboxylate) at the water/goethite interface was studied as a function of pH and ionic strength by means of quantitative adsorption measurements and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. ATR-FTIR spectra were obtained of suspensions prepared in both H₂O and D₂O. In order to identify the number of predominating surface complexes and to improve the resolution of overlapping peaks the ATR-FTIR spectra were subjected to a 2D correlation spectroscopic analysis. The adsorption envelopes of acetate, benzoate, and cyclohexanecarboxylate are similar and depend strongly on pH and ionic strength, but the pH dependence is also correlated to the slightly different pK_a values of the monocarboxylic acids. At the molecular level, the ATR-FTIR spectroscopic results reveal two surface complexes: one solvent-surface hydration-separated ion pair and one surface hydration-shared ion pair. The former predominates at circumneutral pH values while the latter forms mainly in the acidic pH range. We find no evidence for direct inner-sphere coordination between the carboxylic oxygens and the Fe(III) ions present at the surface. The identification of surface hydration-shared ion pairs emphasizes the importance of comparatively strong ionic hydrogen-bonding interactions for adsorption processes at the water/goethite interface.     

Speciation of aqueous Ni(II)-carboxylate and Ni(II)-fulvic acid solutions: Combined ATR-FTIR and XAFS analysis

Aqueous solutions containing Ni(II) and a series of structurally related carboxylic acids were analyzed using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and Ni K-edge X-ray absorption fine structure spectroscopy (XAFS). XAFS spectra were also collected for solutions containing Ni²⁺ and chelating ligands (ethylenediaminetetraacetic acid, nitrilotriacetic acid (NTA)) as well as soil fulvic acid. Limited spectral changes are observed for aqueous Ni(II) complexes with monocarboxylates (formate, acetate) and long-chain polycarboxylates (succinate, tricarballylate), where individual donor groups are separated by multiple bridging methylene groups. These spectral changes indicate weak interactions between Ni(II) and carboxylates, and the trends are similar to some earlier reports for crystalline Ni(II)-acetate solids, for which X-ray crystallography studies have indicated monodentate Ni(II)-carboxylate coordination. Nonetheless, electrostatic or outer-sphere coordination cannot be ruled out for these complexes. However, spectral changes observed for short-chain dicarboxylates (oxalate, malonate) and carboxylates that contain an alcohol donor group adjacent to one of the carboxylate groups (lactate, malate, citrate) demonstrate inner-sphere metal coordination by multiple donor groups. XAFS spectral fits of Ni(II) solutions containing soil fulvic acid are consistent with inner-sphere Ni(II) coordination by one or more carboxylate groups, but spectra are noisy and outer-sphere modes of coordination cannot be ruled out. These molecular studies refine our understanding of the interactions between carboxylates and weakly complexing divalent transition metals, such as Ni(II).     

A predictive model (ETLM) for As(III) adsorption and surface speciation on oxides consistent with spectroscopic data

Arsenic(III) adsorption reactions are thought to play a critical role in the mobility of arsenic in the environment. It is the nature of the As(III) surface species that must be known on a wide variety of minerals and over a range of pH, ionic strength and surface coverage in order to be able to predict adsorption behavior. EXAFS and XANES spectroscopic studies have identified bidentate, binuclear inner-sphere surface species and/or an outer-sphere species, but only a few oxides have been examined. These results need to be integrated with a predictive surface complexation model in order to ascertain the environmental conditions under which the different surface species may be important on a wide range of solids. In the present study, the surface species information from XAFS and XANES studies has been built into a recent extension of the triple-layer model (ETLM) for the formation of inner-sphere complexes of anions that takes into account the electrostatics of water dipole desorption during ligand exchange reactions. The ETLM has been applied to regress surface titration, proton coadsorption, and As(III) adsorption data over extensive ranges of pH, ionic strength, electrolyte type and surface coverage for magnetite, goethite, gibbsite, amorphous hydrous alumina, hydrous ferric oxide (HFO), ferrihydrite, and amorphous iron oxide. Two principal reactions forming inner- and outer-sphere As(III) surface species,

     

Influence of microbial hydroxamate siderophores on Pb(II) desorption from α-FeOOH

Siderophores are low-molecular weight organic molecules secreted by plants and micro-organisms in response to Fe stress. With stability constants commonly exceeding 10³⁰, siderophores are considered to have higher affinities for Fe(III) than for any other major or trace element dissolved in soil solution. However, several siderophores have affinities for trace metals that approach those for Fe(III), and certain actinides form siderophore complexes of surprisingly high stability. The purpose of this study was to examine the role of hydroxamate siderophores in controlling Pb sorption to an Fe(III) oxide adsorbent. Goethite [α-FeOOH], prepared by standard methods and identified by X-ray diffraction, gave a specific surface of 36 m² g⁻¹ as determined by N₂ multipoint BET analysis. Adsorption experiments were performed aseptically using a batch method with a goethite concentration of 1.0 g l⁻¹ and an ionic strength of 0.01 M NaClO₄. Soluble Pb and Fe were measured between pH 3 and 8 by first adding Pb (10 μM) and then siderophore (10, 20, or 40 μM) to the goethite suspension. Three hydroxamate siderophores were employed: desferrioxamine B (DFB), ferrichrome (FC), and rhodotorulic acid (RA). Following 20 h reaction, Pb and Fe in solution were measured by ICP–MS and ICP–AES, respectively. The efficacy of siderophore-mediated Pb desorption varied with siderophore type and generally increased with pH and siderophore/Pb molar ratio. Desferrioxamine B, at pH 6.5 and a DFB/Pb molar ratio of 4, solubilised nearly 25% of the total sorbed Pb. In the presence of 10 μM FC, Pb adsorption largely mimicked that for the siderophore-free system, whereas significant amounts of Pb were desorbed with 20 μM FC at pH >5.5. The dihydroxamate siderophore, RA, was the least effective Pb chelator, requiring 20 μM to desorb detectable amounts of Pb.     

Molecular-scale mechanisms of distribution and isotopic fractionation of molybdenum between seawater and ferromanganese oxides

The distribution of Mo between seawater and marine ferromanganese oxides has great impacts on concentration and isotopic composition of Mo in modern oxic seawater. To reveal the adsorption chemistry of Mo to ferromanganese oxides, we performed (i) detailed structural analyses of Mo surface complexes on δ-MnO₂, ferrihydrite, and hydrogenetic ferromanganese oxides by L₃- and K-edge XAFS, and (ii) adsorption experiments of Mo to δ-MnO₂ and ferrihydrite over a wide range of pHs, ionic strengths, and Mo concentrations. XAFS analyses revealed that Mo forms distorted octahedral (Oh) inner-sphere complexes on δ-MnO₂ whereas it forms a tetrahedral (Td) outer-sphere complex on ferrihydrite. In the hydrogenetic ferromanganese oxides, the dominant host phase of Mo was revealed to be δ-MnO₂. These structural information are consistent with the macroscopic behaviors of Mo in adsorption experiments, and Mo concentration in modern oxic seawater can be explained by the equilibrium adsorption reaction on δ-MnO₂. In addition, the large isotopic fractionation of Mo between seawater and ferromanganese oxides detected in previous studies can be explained by the structural difference between and adsorbed species on the δ-MnO₂ phase in ferromanganese oxides. In contrast, smaller fractionation of Mo isotopes on ferrihydrite is due to little change in the Mo local structures during its adsorption to ferrihydrite.The structures of Mo species adsorbed on crystalline Fe (oxyhydr)oxides, goethite, and hematite were also investigated at pH 8 and I = 0.70 M (NaNO₃). Our XAFS analyses revealed that Mo forms inner-sphere complexes on both minerals: Td edge-sharing (46%) and Oh double corner-sharing (54%) for goethite, and Td double corner-sharing (14%) and Oh edge-sharing (86%) for hematite. These structural information, combined with those for amorphous ferrihydrite and δ-MnO₂, show the excellent correlation with the magnitude of adsorptive isotopic fractionation of Mo reported in previous studies: the proportion of Oh species or their magnitude of distortion in Mo surface complexes become larger in the order of ferrihydrite < goethite < hematite < δ-MnO₂, a trend identical to the magnitude of isotopic fractionation.Based on the comparison with previous reports for Mo surface species on various oxides, the chemical factors that affect Mo surface complex structures were also discussed. The hydrolysis constant of cation in oxides, log K_OH (or the acidity of the oxide surfaces, PZC) is well correlated with the mode of attachment (inner- or outer-sphere) of Mo surface complexes. Furthermore, the symmetric change in Mo species from Td to Oh is suggested to be driven by the formation of inner-sphere complexes on specific sites of the oxide surfaces.     

Pyrolusite surface transformations measured in real-time during the reactive transport of Co(II)EDTA2−

Oxidation of Co(II)EDTA²⁻ to Co(III)EDTA⁻ by manganese and iron hydrous oxide minerals enhances the transport of ⁶⁰Co in subsurface environments. Until now, reduction of the oxidant MnO₂ has not been identified in hydrodynamic systems, leaving the fate and transport mechanisms involving ⁶⁰Co in natural environments unresolved. We investigated the transport of Co(II)EDTA²⁻ through packed beds of β-MnO₂ and identified the reaction mechanism using a novel hydrodynamic flow cell coupled with X-ray absorption near edge structure (XANES) spectroscopy. Using this technique we are able to determine both solution and solid-phase species of cobalt and manganese in real-time. Co(II)EDTA²⁻ is produced while Mn(IV) is reduced to Mn(III) which forms an α-Mn₂O₃layer on pyrolusite. This layer passivates the surface after an initial reaction period and ultimately limits the production of Co(III)EDTA⁻. As a consequence, the enhanced transport of ⁶⁰Co by oxidative processes may be diminished by continual exposure to pyrolusite—an advantage from an environmental quality perspective. It has also been clarified that Mn(III) is formed rather than Mn(II) resulting in formation of a stable trivalent manganese solid (α-Mn₂O₃).     

Surface complexation of Pb(II) by hexagonal birnessite nanoparticles

Natural hexagonal birnessite is a poorly crystalline layer type Mn(IV) oxide precipitated by bacteria and fungi which has a particularly high adsorption affinity for Pb(II). X-ray spectroscopic studies have shown that Pb(II) forms strong inner-sphere surface complexes mainly at two sites on hexagonal birnessite nanoparticles: triple corner-sharing (TCS) complexes on Mn(IV) vacancies in the interlayers and double edge-sharing (DES) complexes on lateral edge surfaces. Although the TCS surface complex has been well characterized by spectroscopy, some important questions remain about the structure and stability of the complexes occurring on the edge surfaces. First-principles simulation techniques such as density functional theory (DFT) offer a useful way to address these questions by providing complementary information that is difficult to obtain by spectroscopy. Following this computational approach, we used spin-polarized DFT to perform total-energy-minimization geometry optimizations of several possible Pb(II) surface complexes on model birnessite nanoparticles similar to those that have been studied experimentally. We first validated our DFT calculations by geometry optimizations of (1) the Pb-Mn oxyhydroxide mineral, quenselite (PbMnO₂OH), and (2) the TCS surface complex, finding good agreement with experimental structural data while uncovering new information about bonding and stability. Our geometry optimizations of several protonated variants of the DES surface complex led us to conclude that the observed edge-surface species is very likely to be this complex if the singly coordinated terminal O that binds to Pb(II) is protonated. Our geometry optimizations also revealed that an unhydrated double corner-sharing (DCS) species that has been proposed as an alternative to the DES complex is intrinsically unstable on nanoparticle edge surfaces, but could become stabilized if the local coordination environment is well-hydrated. A significant similarity exists in the structural parameters for the TCS complex and those for a DCS edge-surface complex that is protonated in the same manner as the optimal DES complex, which could complicate detecting the DCS complex in X-ray absorption spectra.     

ATR-FTIR spectroscopic characterization of coexisting carbonate surface complexes on hematite

The speciation of carbonate adsorbed to hematite in air-equilibrated aqueous solutions has been studied using ATR-FTIR spectroscopy. Samples were measured over a range of pH conditions, at 0.1 M NaCl and at low ionic strength, and in H₂O and D₂O solutions to permit a multispecies analysis of the data. Second-derivative analyses and fits to the spectra indicate the presence of two major and two minor surface-bound carbonate species. The two major complexes coexist at near-neutral pH and low ionic strength. One of these two complexes is relatively sensitive to ionic strength, being displaced at 0.1 M NaCl, whereas the other is not. Comparison of experimental to DFT/MO-calculated frequencies suggest these two major species to be (a) a monodentate binuclear inner-sphere carbonate surface complex, and (b) a fully or partially solvated carbonate (CO₃²⁻) species that is symmetry broken and appears to reside in the structured vicinal water layers at the hematite-water interface, retained by hydrogen bonding and/or other forces. Minor carbonate complexes include diffuse layer CO₃²⁻ and an unidentified inner-sphere species. Both of the dominant species observed here are likely to be significant controls of the surface charge and sorptive properties of Fe-oxides.