Evolution of the barrier islands of southern Long Island, New York

Three lines of evidence based on data from more than 400 boreholes and vibrocores have been used to reconstruct the evolution of the barrier islands during the Holocene transgression in southern Long Island, New York: (1) the Holocene transgressive stratigraphic sequence behind the present barriers, (2) the stratigraphic patterns of the inner shelf, and (3) the morphology of the now-buried late Pleistocene coastal features. The extensive preservation of backbarrier sediments, radiocarbon dated between 7000 and 8000 yr BP, on the inner shelf of southern Long Island suggests that the barriers have not retreated by continuous shoreface erosion alone, but have also undergone discontinuous retreat by in-place ‘drowning’ of barriers and stepwise retreat of the surf zone. Such stepwise retreat of the surf zone has prevented the backbarrier sediments from being reworked. Based on the presence of submerged barrier sand bodies in seismic records, it is inferred that about 9000 years ago, when the sea stood about 24 m below the present sea level, a chain of barriers developed on the present shelf about 7 km offshore of the present barriers. With continued sea-level rise, the – 24 m barrier built upward until the sea reached about – 15 m MSL, just prior to 7000 yr BP. The barriers were then submerged by the rapidly rising sea, and the surf zone shifted rapidly landward to a position about 2 km from the present shoreline. The surf zone overstepped to the landward margin of the old lagoon, which had become fixed at the steep seaward face of mid-Wisconsinan (?) or Sangamonian coastal barriers. During the past 5000 or 6000 years, the shoreface has retreated continuously by about 2 km. Evidence from southern Long Island and elsewhere in regions of coastal submergence indicates that rapid sea-level rise and low sand supply seem to favour the stepwise retreat of barriers, whereas slow rates of submergence and a greater supply of sand generally favour continuous shoreface retreat. Stationary upbuilding, or seaward progradation of barriers may occur when supply of sand is great, and/or submergence is slowed or reversed. Morphologic highs on the pretransgression surface (such as old barrier ridges) tend to fix the migrating barrier shoreline during either continuous retreat, or stepwise retreat of barriers.     

Late‐glacial to Holocene depositional architecture of the Ombrone palaeovalley system (Southern Tuscany,Italy): Sea‐level,climate and local control in valley‐fill variability

The Ombrone palaeovalley was incised during the last glacial sea‐level fall and was infilled during the subsequent Late‐glacial to Holocene transgression. A detailed sedimentological and stratigraphic study of two cores along the palaeovalley axis led to reconstruction of the post‐Last Glacial Maximum valley‐fill history. Stratigraphic correlations show remarkable similarity in the Late‐glacial to early‐Holocene succession, but discrepancy in the Holocene portion of the valley fill. Above the palaeovalley floor, about 60 m below sea‐level, Late‐glacial sedimentation is recorded by an unusually thick alluvial succession dated back to ca 18 cal kyr bp . The Holocene onset was followed by the retrogradational shift from alluvial to coastal facies. In seaward core OM1, the transition from inner to outer estuarine environments marks the maximum deepening of the system. By comparison, in landward core OM2, the emplacement of estuarine conditions was interrupted by renewed continental sedimentation. Swamp to lacustrine facies, stratigraphically equivalent to the fully estuarine facies of core OM1, represent the proximal expression of the maximum flooding zone. This succession reflects location in a confined segment of the valley, just landward of the confluence with a tributary valley. It is likely that sudden sediment input from the tributary produced a topographic threshold, damming the main valley course and isolating its landward segment from the sea. The seaward portion of the Ombrone palaeovalley presents the typical estuarine backfilling succession of allogenically controlled incised valleys. In contrast, in the landward portion of the system, local dynamics completely overwhelmed the sea‐level signal, following marine ingression. This study highlights the complexity of palaeovalley systems, where local morphologies, changes in catchment areas, drainage systems and tributary valleys may produce facies patterns significantly different from the general stratigraphic organization depicted by traditional sequence‐stratigraphic models.     

Gravel-topped offshore bar sequences in the Lower Carboniferous of southern Ireland

Within the Kinsale Formation (Lower Carboniferous) of southern Ireland are pebbly sandstones and conglomerates contained in what is known locally as the Garryvoe conglomerate facies. In this facies there are three main groups of lithologies: (a) heterolithic mudrocks and sandstones characterized by a wide variety of wave-produced structures; (b) sandstones dominated by swaley cross-stratification (SCS), parallel lamination, and rare hummocky cross-stratification (HCS); and (c) pebbly sandstones and conglomerates occurring as discrete beds or as gravel clasts dispersed through SCS sets. Successions of the facies comprise units of heterolithic mudrock and rippled sandstone alternating repeatedly with coarsening-upward units of SCS pebbly sandstone capped by top-surface granule and pebble lags. The Garryvoe conglomerate facies accumulated in a system of offshore bars on a muddy shallow-marine shelf that was dominated by waves and currents generated by storms. Sands and gravels were bypassed from a contemporaneous northerly coastal zone to the shelf, where they were moulded by the storm-generated flow into low, broad, sand ridges (offshore bars). The elongate bars were spaced kilometres apart, oriented obliquely to the coast, and separated by muddy interbar troughs. Their surfaces were largely covered by hummocky and swaley forms. Long-term, gradual seaward migration of the offshore bars concentrated gravels on landward flanks from the dispersed pebbly sands that were on the crests and seaward flanks. Exceptionally intense storms could form laterally extensive winnowed gravel lags above thinned bar sequences. Such storms could also flush gravel-bearing turbidity currents into muddy interbar trough areas.     

Coupled ‘storm‐flood’ depositional model: Application to the Miocene–Modern Baram Delta Province,north‐west Borneo

The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal–deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present‐day Baram Delta Province, suggests a ‘storm‐flood’ depositional model comprising two distinct periods: (i) fair‐weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon‐driven storm periods are characterized by increased wave‐energy and offshore‐directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation (‘storm‐floods’). The modern equivalent environment has the following characteristics: (i) humid‐tropical monsoonal climate; (ii) narrow (ca <100 km) and steep (ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone‐dominated hinterland; (iv) multiple independent, small to moderate‐sized (10² to 10⁵ km²) drainage basins; (v) predominance of river‐mouth bypassing; and (vi) supply‐dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier‐upward successions (metre to decametre‐scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre‐scale silty laminae; (ii) heterolithic sandstone–mudstone alternations (centimetre to metre‐scale); and (iii) sharp‐based, swaley cross‐stratified sandstone beds and bedsets (metre to decimetre‐scale). Gutter casts (decimetre to metre‐scale) are widespread, they are filled with swaley cross‐stratified sandstone and their long axes are oriented perpendicular to the palaeo‐shoreline. The gutter casts and other associated waning‐flow event beds suggest that erosion and deposition was controlled by high‐energy, offshore‐directed, oscillatory‐dominated, sediment‐laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma⁻¹), in a ‘storm‐flood’‐dominated environment, resulted in a highly efficient and effective offshore‐directed sediment transport system.     

Submarine sediment and landform record of a palaeo‐ice stream within the British−Irish Ice Sheet

This paper examines marine geophysical and geological data, and new multibeam bathymetry data to describe the Pleistocene sediment and landform record of a large ice‐stream system that drained ～3% of the entire British?Irish Ice Sheet at its maximum extent. Starting on the outer continental shelf NW of Scotland we describe: the ice‐stream terminus environment and depocentre on the outer shelf and continental slope; sediment architecture and subglacial landforms on the mid‐shelf and in a large marine embayment (the Minch); moraines and grounding line features on the inner shelf and in the fjordic zone. We identify new soft‐bed (sediment) and hard‐bed (bedrock) subglacial landform assemblages in the central and inner parts of the Minch that confirm the spatial distribution, coherence and trajectory of a grounded fast‐flowing ice‐sheet corridor. These include strongly streamlined bedrock forms and megagrooves indicating a high degree of ice‐bed coupling in a zone of flow convergence associated with ice‐stream onset; and a downstream bedform evolution (short drumlins to km‐scale glacial lineations) suggesting an ice‐flow velocity transition associated with a bed substrate and roughness change in the ice‐stream trunk. Chronology is still lacking for the timing of ice‐stream demise; however, the seismic stratigraphy, absence of moraines or grounding‐line features, and presence of well‐preserved subglacial bedforms and iceberg scours, combined with the landward deepening bathymetry, all suggest that frontal retreat in the Minch was probably rapid, via widespread calving, before stabilization in the nearshore zone. Large moraine complexes recording a coherent, apparently long‐lived, ice‐sheet margin position only 5–15 km offshore strongly support this model. Reconstructed ice‐discharge values for the Minch ice stream (12–20 Gt a^?1) are comparable to high mass‐flux ice streams today, underlining it as an excellent palaeo‐analogue for recent rapid change at the margins of the Greenland and West Antarctic Ice Sheets.     

Evolution of a classic sand ridge field: Maryland sector, North American inner shelf

The ridge and swale topography of the Middle Atlantic Bight is best developed on the Delaware-Maryland inner shelf. Here sand ridges can be seen in all stages of formation. Several aspects of the ridge field are pertinent to the problem of ridge genesis. The first is ridge morphology. There is a systematic morphologic change from shoreface ridges through nearshore ridges to offshore ridges, which reflects the changing hydraulic regime. As successively more seaward ridges are examined, maximum side slope decreases, the ratio of maximum seaward slope to maximum landward slope decreases, and the cross-sectional area increases. These changes in ridge morphology with depth and distance from shore appear to be equivalent to the morphologic changes experienced by a single ridge during the course of the Holocene transgression. A second aspect is the change in bottom sediment characteristics that accompanies these large-scale morphologic changes. Megaripples, sand waves and mud lenses appear in the troughs between nearshore and offshore ridges. These changes indicate that the storm flows which maintain ridges are less frequently experienced in the deeper sector, and that the role of high-frequency wave surge becomes less important relative to the role of the mean flow component in shaping the sea-floor. A third aspect is the systematic relationship of grain size to topography. Grain size is 90° out of phase with topography, so that the coarsest sand lies between the axis of the landward trough and the ridge crest, while the finest sand lies between the ridge crest and the axis of the seaward trough. This relationship is characteristic of large-scale bedforms. Finally, flow was measured and transport calculated on the same ridge during a one-month period (November 1976). Threshold was exceeded only during storm events. Mean transport was southerly and a little seaward with respect to both the ridge crest and the shoreline. These flow measurements are in conformity with the pattern of smaller bedforms. A 43-year time series of bathymetric change for this ridge reveals a systematic pattern of landward flank erosion, seaward flank deposition, and seaward crest migration. Sand ridges are considered the consequence of constructive feedback between an initial topography and the resulting distribution of bottom shear stress. The relationship between grain size and topography supports this model, but does not account directly for the oblique angle of the ridge with respect to the coastline. This feature may be due to a more rapid alongshore migration rate of the inshore edge of the ridge than the offshore edge, and the relationship between this migration rate, and the rate of shoreface retreat.     

From river to shelf,anatomy of a high‐frequency depositional sequence: The Late Pleistocene to Holocene Tiber depositional sequence

The Late Pleistocene/Holocene Tiber delta succession represents the most recent and one of the best preserved, high‐frequency/low‐rank depositional sequences developed along the Latium continental margin of the Italian peninsula. Several previous studies have established a robust data set from which it has been possible to describe the stratigraphic architecture of the entire Tiber depositional sequence from the landward to seaward sectors and over a distance of 60 km. The Tiber depositional sequence shows many characteristics found in other Late Pleistocene to Holocene deltaic and coastal successions of the Mediterranean area. The stratigraphic architecture of the Tiber depositional sequence is controlled mainly by glacioeustasy, although factors such as tectonic uplift, volcanism and subsidence, exert an influence at a local scale. The resulting depositional model allowed discussion of some important points such as: (1) the genesis of the Tiber mixed bedrock‐alluvial valley, extending from the coastal plain to the innermost portion of the shelf, recording (i) multiple episodes of incision during relative sea‐level fall, and (ii) a downstream increase of depth and width of the valley during the base‐level fall and the subsequent base‐level rise; (2) the different physical expression of the Tiber depositional sequence boundary from landward to seaward, and its diachronous and composite character; (3) the maximum depth reached by the Tiber early lowstand delta at the end of the sea‐level fall is estimated at ca 90 m below the present sea‐level and not at 120 m as suggested by previous works; (4) the backward position of the Tiber late lowstand delta relative to the deposit of early lowstand; (5) the change of the channel pattern and of the stacking pattern of fluvial deposits within the Lowstand Systems Tract, Transgressive Systems Tract and Highstand Systems Tract. All of these features indicate that the Late Pleistocene/Holocene Tiber delta succession, even if deposited in a short period of time from a geological point of view, represents the result of the close interaction among many autogenic and allogenic factors. However, global eustatic variations and sediment supply under the control of climatic changes can be considered the main factors responsible for the stratigraphic architecture of this sedimentary succession, which has been heavily modified by human activity only in the last 3000 years.     

Post-subduction margin structures along Boyd Strait, Antarctic Peninsula

The Pacific margin of the Antarctic Peninsula to the southwest of the Hero Fracture Zone (HFZ) is a former subducting margin which became inactive following the arrival of ridge crest segments of the Antarctic–Phoenix ridge at the margin during the Tertiary. In contrast, the part of the margin to the northeast of the HFZ remains active. Tertiary convergence was approximately perpendicular to the margin and ongoing motion is thought to have the same orientation. A new seismic reflection profile running along Boyd Strait, just northeast of the landward projection of the HFZ, shows major structural components similar to those typically observed along the margin to the southwest of the HFZ. In order of increasing proximity to the margin, these components are: the inner shelf, the shelf basin, the mid-shelf basement high (MSBH), and the outer shelf. The continuation of the post-subduction margin structures to the active margin suggests that the boundary between crust with passive and active margins characteristics is not sharply defined. Our postulated scenario for tectonic evolution along Boyd Strait is that: (1) before the arrival of the last ridge crest segment to the southwest of the HFZ, the inner shelf and the shelf basin were part of a Cretaceous–Tertiary arc and forearc area, (2) after the arrival, thermal effects resulting from interaction of the ridge crest with the margin just southwest of the HFZ lead to the formation of the MSBH to the northeast, but MSBH uplift in Boyd Strait did not prevent concurrent cross-shelf sediment transport contributing to development of an extensive outer shelf on the seaward flank of the MSBH, (3) Recent extension in Bransfield Strait, a marginal basin to the northeast of the landward projection of the HFZ, has caused about 10 km of seaward deflection in the strike of the part of the MSBH to the northeast of the projection of the HFZ.     

Buried and Submerged Greek Archaeological Coastal Structures and Artifacts as Gauges to Measure Late Holocene Seafloor Subsidence off Calabria,Italy

This synthesis integrates recently acquired archaeological and geological data with earlier documented observations to shed light on the subsidence of ancient Greek coastal facilities in southern Italy. These are now positioned between former shorelines and inner shelf sectors at five Calabrian margin localities. Submergence of coastal to inner shelf facilities has resulted in part from sea‐level rise by about 2 m associated with glacio‐hydro‐isostatic factors since archaic to classic Greek time. This phenomenon alone, however, does not explain the wide variation of measured subsidence rates from site‐to‐site. The marked lowering of coastal site substrates by seismo‐tectonic activity (including extensional fault motion), stratal readjustments at depth, and compaction of underlying sediment sequences is significant. Four of the subsided facilities are positioned near emerged Calabrian areas where prevailing Holocene average annual land uplift rates range to ˜1.0 mm/yr; at the fifth, near Hipponion, terrains have risen by nearly 2 mm/yr. In marked contrast, submerged and/or buried structures record the following late Holocene long‐term average rates of coastal margin subsidence: Sybaris‐Thuri on the Taranto Gulf margin (˜0.5–1.0 mm/yr); Hipponion‐Vibo Valentia along the Tyrrhenian coast (˜0.8 to ˜3.2 mm/yr); and Locri‐Epizefiri, Kaulonia, and Capo Colonna on Calabria's Ionian margin (˜1.6, ˜1.6–2.4, and ˜4.0 mm/yr, respectively). © 2012 Wiley Periodicals, Inc.     

The role of shelf morphology on storm‐bed variability and stratigraphic architecture,Lower Cretaceous,Svalbard

The dominance of isotropic hummocky cross‐stratification, recording deposition solely by oscillatory flows, in many ancient storm‐dominated shoreface–shelf successions is enigmatic. Based on conventional sedimentological investigations, this study shows that storm deposits in three different and stratigraphically separated siliciclastic sediment wedges within the Lower Cretaceous succession in Svalbard record various depositional processes and principally contrasting sequence stratigraphic architectures. The lower wedge is characterized by low, but comparatively steeper, depositional dips than the middle and upper wedges, and records a change from storm‐dominated offshore transition – lower shoreface to storm‐dominated prodelta – distal delta front deposits. The occurrence of anisotropic hummocky cross‐stratification sandstone beds, scour‐and‐fill features of possible hyperpycnal‐flow origin, and wave‐modified turbidites within this part of the wedge suggests that the proximity to a fluvio‐deltaic system influenced the observed storm‐bed variability. The mudstone‐dominated part of the lower wedge records offshore shelf deposition below storm‐wave base. In the middle wedge, scours, gutter casts and anisotropic hummocky cross‐stratified storm beds occur in inferred distal settings in association with bathymetric steps situated across the platform break of retrogradationally stacked parasequences. These steps gave rise to localized, steeper‐gradient depositional dips which promoted the generation of basinward‐directed flows that occasionally scoured into the underlying seafloor. Storm‐wave and tidal current interaction promoted the development and migration of large‐scale, compound bedforms and smaller‐scale hummocky bedforms preserved as anisotropic hummocky cross‐stratification. The upper wedge consists of thick, seaward‐stepping successions of isotropic hummocky cross‐stratification‐bearing sandstone beds attributed to progradation across a shallow, gently dipping ramp‐type shelf. The associated distal facies are characterized by abundant lenticular, wave ripple cross‐laminated sandstone, suggesting that the basin floor was predominantly positioned above, but near, storm‐wave base. Consequently, shelf morphology and physiography, and the nature of the feeder system (for example, proximity to deltaic systems) are inferred to exert some control on storm‐bed variability and the resulting stratigraphic architecture.     

Subtropical to temperate facies from a transition zone, mixed carbonate–siliciclastic system, Palaeogene, North Carolina, USA

Palaeogene passive margin sediments on the US mid‐Atlantic coastal plain provide valuable insight into facies interaction and distribution on mixed carbonate–siliciclastic shelves. This study utilizes well cuttings, outcrop, core, and seismic data to document temporal and spatial variations in admixed bryozoan‐rich skeletal carbonates and sandy siliciclastic units that were deposited on a humid passive margin located in the vicinity of a major marine transition zone. This zone was situated between north‐flowing, warm waters of the ancestral Gulf Stream (carbonate dominated settings) and south‐flowing, cold waters of the ancestral Labrador Current (siliciclastic dominated settings). Some degree of mixing of carbonates and siliciclastics occurs in all facies; however, siliciclastic‐prone sediments predominate in nearshore settings, while carbonate‐prone sediments are more common in more open marine settings of the inner shelf break and deep shelf. A distinctive dual‐break shelf depositional profile originated following a major Late Cretaceous to Palaeocene transgression that drowned the earlier shallow platform. This profile was characterized by prominent mid‐shelf break dividing the shallow shelf from the deep shelf and a major continental shelf/slope break. Incomplete filling of available accommodation space during successive buildup of the shallow shelf preserved the topographic break on this passive margin. Storm wave base also contributed to the preservation of the dual‐break shelf geometry by beveling shallow shelf sediments and transporting them onto and seaward of the mid‐shelf break. Sediment fines in deep shelf facies were produced in place, transported downdip from the shallow shelf by storm ebb currents and boundary currents, and reworked from adjacent areas of the deep shelf by strike‐parallel boundary currents. Regional climate and boundary currents controlled whether carbonate or siliciclastic material was deposited on the shelf, with warmer waters and more humid climates favouring carbonate deposition and cooler, more arid conditions favouring glaucony and siliciclastic dominated deposition. Continuous wave and current sweeping of the shallow shelf favoured deposition of mud‐lean facies across much of the shallow shelf. Skeletal components in much of the carbonate‐rich strata formed in warm, nutrient‐rich subtropical waters, as indicated by widespread occurrences of larger benthic foraminifera and molluscan assemblages. These indicators of warm water deposition within the bryozoan‐mollusk‐rich carbonate assemblage on this shelf provide an example of a warm water bryomol assemblage; such facies generally are associated with cooler water depositional settings.     

Paralic parasequences associated with Eocene sea-level oscillations in an active margin setting: Trihueco Formation of the Arauco Basin, Chile

The Eocene Trihueco Formation is one of the best exposed successions of the Arauco Basin in Chile. It represents a period of marine regression and transgression of second-order duration, during which barrier island complexes developed on a muddy shelf. The strata are arranged in classical shoaling-upward parasequences of shoreface and beach facies capped by coal-bearing, back-barrier lagoon deposits. These fourth-order cycles are superimposed upon third-order cycles which caused landward and seaward shifts of the coastal facies belts. The final, punctuated rise in sea level is represented by shelf mudrocks with transgressive incised shoreface sandstones. Relative sea-level oscillations as revealed in the stratigraphy of the Trihueco Formation show a reasonable correlation with published Eocene eustatic curves.     

High resolution stratigraphy and facies differentiation of the shallow marine Annot Sandstones, south-east France

High resolution stratigraphical analysis divides a rock succession into the basic genetic units of stratigraphy which are here termed small scale stratigraphical cycles. Each cycle records the sedimentological response to an episode of shallowing and deepening. Assuming that these changes in water depth reflect changes in the shoreline position, they can be considered as regressive/transgressive episodes. Each cycle comprises a regressive and transgressive facies tract which will be variably proportioned; in some examples a facies tract may only be represented by a hiatal surface of no deposition, erosion and/or bypass. In the Annot Sandstones of south-east France, variations in facies types, proportions and associations can be demonstrated both laterally and vertically through the succession. First, it is demonstrated that facies variations occur within regressive or transgressive facies tracts as a function of the stratigraphical stacking pattern of the cycles (i.e. landward, vertical or seaward stacked); this is termed ‘vertical facies differentiation’. Second, the proportions of facies tracts and their constituent facies types within an individual cycle vary between more landward and more seaward palaeogeographical locations; this is termed ‘lateral facies differentiation'. The upper Eocene/lower Oligocene Annot sandstones outcrop in the Maritime Alps of south-east France, within the thin skinned outer fold and thrust belt of the Alpine arc. The sandstones are well exposed in the area of the Col de la Cayolle on the north-west margin of the Argentera Massif, where lithostratigraphical correlations are possible over 3·5 km in a NNW/SSE direction, perpendicular to the edge of the depositional basin. Traditionally, these outcrops have been interpreted as deep marine turbidite lobe sediments; this study reflects a significant reinterpretation of this succession as having been deposited in a shallow marine environment. Seven sedimentary sections were measured through the succession, which is divided into 10 small scale stratigraphical cycles. These cycles are described in terms of eight facies which are separated into their transgressive or regressive facies tracts. In eight of the 10 cycles, the regressive facies tracts reflect the progradation of storm influenced braid deltas over shelf muds and silts. In two of the 10 cycles, the regressive facies tracts reflect barrier inlet and wash-over sands interfingering with back barrier deposits. These latter two cycles are located within landward stepping cycle sets; this is an example of vertical facies differentiation. Transgressive facies tracts locally reworked the upper surface of the regressive facies tract and also comprise barrier and back barrier deposits. The facies succession within each cycle varies according to its position with respect to the palaeoshoreline. The more landward portion of an individual cycle comprises a deltaic shoaling upward succession, culminating in coarse distributary channel conglomerates, overlain by a transgressive barrier/inlet system with extensive back barrier deposits. Beyond the delta front, the more seaward equivalent of individual cycles comprises an erosive base, with aggradational massive pebbly sandstones sitting directly upon offshore heterolithics; these sandstones are interpreted as hyperconcentrated fluvial efflux into the nearshore environment. This grades upward into offshore heterolithics and graded storm deposits representing the products of ravinement, which are then overlain by shelf mudstones. In summary, the more landward portions of cycles preserve predominantly regressive facies tracts, whereas the more seaward portions preserve aggradational to retrogradational strata of the transgressive facies tract; this is an example of lateral facies differentiation.     

A New Model for Coastal Resource Productivity and Sea‐Level Change: The Role of Physical Sedimentary Processes in Assessing the Archaeological Potential of Submerged Landscapes from the Northwest Australian Continental Shelf

Existing models of coastal occupation, in one form or another, embrace the assumption that changes in mean sea level were the prime driver for shifts in coastal resource productivity of consequence to coastal foragers. Focusing on the North West Shelf of Australia, this paper considers the role of physical sedimentary processes in understanding both past coastal resource productivity and the archaeology of drowned coastal landscapes. From a review of up‐to‐date literature on sea‐level related coastal formation process related to the North West Shelf, we describe the complex interplay of sea‐level change and sedimentary processes in determining (i) coastal resource availability, and (ii) archaeological site preservation potential through time. We argue that human behavioral models that have been linked solely to changes in sea level change from ca. 45 ka onward along the Australia continental shelf have inadequately accounted for local sedimentary regimes. It is not past sea‐level per se, which is of relevance to coastal productivity and human behavioral ecology models but changes in tidal regimes, coastal configurations and sedimentation. We conclude that our understanding of maritime adaptations for Sahul (Greater Australia) remain incomplete without investigating former coastlines and archaeological information that now lies submerged offshore.     

Widespread overspill from a saline density‐current channel and its interaction with topography on the south‐west Black Sea shelf

Seaward of the Bosphorus Strait, the south‐west Black Sea shelf is dominated by the world's largest channel network maintained by a quasi‐continuous saline (ca 35 → 31 psu) underflow. Calculations indicate that >85% of the initial discharge of ca 10⁴ m³s^?1 spills overbank before the shelf edge. This paper documents interaction of the overspill with sea bed topography using multibeam bathymetry, echo‐sounder images of the water column, conductivity–temperature–depth profiles and sediment cores. Overbank spill is widespread, particularly through crevasse channels and on the middle shelf where confinement by channel banks is negligible. Towards the outer shelf, the wind‐driven Rim Current advects mud along the shelf, contributing to levée successions and deposition on stoss sides of elongate transverse ridges. Echo‐sounder profiles reveal metre‐scale eddies over megaflutes, and breaking lee waves and internal hydraulic jumps over ridges. Megaflutes reach 600 m long and 7 m deep, yet form where the underflow, outside the flute, is no thicker than ca 2 to 5 m. Two types of elongate seaward‐facing ridges are recognized. Type 1 ridges, 2 to 5 m high, consist of bivalve‐rich muddy sand in low‐angle (3·5° to 6°) cross‐sets created by the underflow. Type 2 ridges, ca 5 m high, have crests up to 2 km long and a buried wedge‐shaped foundation (the ‘ridge‐core’) comprised of facies similar to Type 1 ridges. These ridge‐cores are blanketed on the landward side by stratified muds, and are capped by obliquely oriented ribs supporting a diverse benthic community. This facies distribution is interpreted to result from stoss‐side and lee‐side velocity and turbulence fluctuations induced by internal hydraulic jumps and breaking lee waves in overspilling portions of the underflow. Experimental results published by W.H. Snyder and co‐workers effectively explain ridge evolution and flow across the ridges, and therefore can be applied with confidence to less easily studied deep‐marine settings swept by turbidity currents.     

Sediment dispersal and quantitative stratigraphic architecture across an ancient shelf

Two large (200 to 300 km), near‐continuous outcrop transects and extensive well‐log data (ca 2800 wells) allow analysis of sedimentological characteristics and stratigraphic architecture across a large area (ca 60 000 km²) of the latest Santonian to middle Campanian shelf along the western margin of the Western Interior Seaway in eastern Utah and western Colorado, USA. Genetically linked depositional systems are mapped at high chronostratigraphic resolution (ca 0·1 to 0·5 Ma) within their sequence stratigraphic context. In the lower part of the studied interval, sediment was dispersed via wave‐dominated deltaic systems with a ‘compound clinoform’ geomorphology in which an inner, wave‐dominated shoreface clinoform was separated by a muddy subaqueous topset from an outer clinoform containing sand‐poor, gravity‐flow deposits. These strata are characterized by relatively steep, net‐regressive shoreline trajectories (>0·1°) with concave‐landward geometries, narrow nearshore belts of storm‐reworked sandstones (2 to 22 km), wide offshore mudstone belts (>250 km) and relatively high sediment accumulation rates (ca 0·27 mm year^?1). The middle and upper parts of the studied interval also contain wave‐dominated shorefaces, but coeval offshore mudstones enclose abundant ‘isolated’ tide‐influenced sandstones that were transported sub‐parallel to the regional palaeoshoreline by basinal hydrodynamic (tidal?) circulation. These strata are characterized by relatively shallow, net‐regressive shoreline trajectories (<0·1°) with straight to concave‐seaward geometries, wide nearshore belts of storm‐reworked sandstones (19 to 70 km), offshore mudstone belts of variable width (130 to >190 km) and relatively low sediment accumulation rates (ca ≤0·11 mm year^?1). The change in shelfal sediment dispersal and stratigraphic architecture, from: (i) ‘compound clinoform’ deltas characterized by across‐shelf sediment transport; to (ii) wave‐dominated shorelines with ‘isolated’ tide‐influenced sandbodies characterized by along‐shelf sediment transport, is interpreted as reflecting increased interaction with the hydrodynamic regime in the seaway as successive shelfal depositional systems advanced out of a sheltered embayment (‘Utah Bight’). This advance was driven by a decreasing tectonic subsidence rate, which also suppressed autogenic controls on stratigraphic architecture.     

Production, preservation and prediction of source-rock facies in deltaic settings

This article hypothesizes that production and preservation of source-rock type facies in deltaic systems, both landward and seaward of a coastline, is mutually exclusive, time-successive and related to the dynamics of relative sea level. Sedimentologic research in the Holocene Mississippi and Rhône delta complexes suggests that rheotrophic peats and associated organic-rich beds preferably accumulate in the accommodation space created behind landward stepping shorelines in a transgressive systems tract (TST). Such a setting also allows for a sufficient supply of recharging fresh nutrient-rich groundwater into the peat forming mires [Kosters, E.C., Suter, J.R., 1993. Facies relationships and systems tracts in the late Holocene Mississippi Delta Plain. Journal of Sedimentary Petrology 63 (4) 727–733.]. Independently carried-out quantitative paleoecological studies in the same delta systems (and in addition in the Orinoco and Po deltas) suggest that in a progradational setting (highstand systems tract/HST), seasonally discharged nutrient- and sediment-laden river waters on the shelf may give rise to anoxia or dysoxia. Subsequent overfertilization of the shelf leads to accumulation of organic-rich mud belts on the shelf [VanderZwaan, G.J., Jorissen, F.J., 1991. Biofacial patterns in river-induced anoxia. In: Tyson, R.V., Pearson, T.H. (Eds.), Modern and Ancient Continental Shelf Anoxia. Geological Society of London, Special Publication no. 58, pp. 65–82.]. Thus, production and preservation of source-rock type facies landward of a shoreline (as peats and related sediments) is preferred in a TST, when accommodation space and nutrient supply are landward of the shoreline. Vice versa, production and preservation of such facies seaward of a shoreline (as organic-rich shelf muds) occurs preferentially in a highstand systems tract. In that situation, accommodation space is on the shelf, where river-fed nutrients are supplied as well. This hypothesis suggests further potential for application of sequence stratigraphic concepts for improved understanding of the occurrence of source-rock type facies.     

Late Quaternary stratigraphy and sedimentology of the inner part of southwest Joseph Bonaparte Gulf

Joseph Bonaparte Gulf is a large embayment on the northwestern continental margin of Australia. It is approximately 300 km east‐west and 120 km north‐south with a broad continental shelf to seaward. Maximum width from the southernmost shore of Joseph Bonaparte Gulf to the edge of the continental shelf is 560 km. Several large rivers enter the gulf along its shores. The climate is monsoonal, sub‐humid, and cyclone‐prone during the December‐March wet season. A bedrock high (Sahul Rise) rims the shelf margin. The sediments within the gulf are carbonates to seaward, grading into clastics inshore. A seaward‐thinning wedge of highstand muds dominates the sediments of the inner shelf of Joseph Bonaparte Gulf. Mud banks up to 15m thick have developed inshore. Coarse‐grained sand ridges up to 15 m high are found off the mouth of the Ord River. These overlie an Upper Pleistocene transgressive lag of mixed carbonate and gravelly siliciclastic sand. Four drowned strandlines are present on the inner shelf at depths of 20, 25, 28 and 30 m below datum. These are interpreted as having formed during stillstands in the Late Pleistocene transgression. Older strandlines at great depths are inferred as having formed during the fall in sea‐level following the last highstand. For the most part the Upper Pleistocene‐Holocene marine sediments overlie an erosion surface cut into older Pleistocene sediments. Incised valleys cut into this erosion surface are up to 5 km wide and have a relief of at least 20 m. The largest valley is that cut by the Ord River. Upper Pleistocene sediments deposited in the incised valleys include interpreted lowstand fluvial gravels, early transgressive channel sands and floodplain silts, and late transgressive estuarine sands and gravels. Older Pleistocene sediments are inferred to have been deposited before and during the 120 ka highstand (isotope stage 5). They consist of sandy calcarenites deposited in high‐energy tide‐dominated shelf environments. Still older shelf and valley‐fill sediments underlie these. The contrast between the Holocene muddy clastic sediments and the sandy carbonates deposited by the 120 ka highstand suggests that either the climate was more arid in the past, with less fluvial transport, or that mud was more effectively trapped in estuaries, allowing development of carbonate depositional environments inshore.     

Late Quaternary coastal and inner shelf stratigraphy, Apalachicola Delta region, Florida

Since the beginning of the Tertiary the sedimentology of the Gulf of Mexico Basin has been dominated by the depositional activity of the Mississippi River. The sedimentologic influence of the Mississippi diminishes with distance east or west of the Louisiana shelf, however. The Texas and northwest Florida shelf margins, for example, are characterized by a series of smaller deltas. In the inner and mid-shelf areas of these regions the near-surface sedimentary units include infilled stream channels and small deltas. Such features are commonly observed in sub-bottom seismic records from the middle and inner shelf of the northeastern Gulf, along the Apalachicola River coast of northwest Florida.

The Apalachicola River is the principal source of clastic sediment to the northeastern Gulf of Mexico. During the late Holocene virtually all of the river's sediment load has been deposited in the modern Apalachicola Delta and in the river's estuary, Apalachicola Bay, which has been filling rapidly. During late Quaternary lowstands, prior to the development of the modern estuary, the river traversed the present-day inner and mid-shelf, incising a network of channels. Based on seismic records, many of these buried shelf channels were considerably larger than their modern counterparts.

During lowstands the Apalachicola River also deposited coarse sediment on the shelf as deltaic and associated river-mouth sediments. These deposits comprise the modern near-surface sediments of the inner and middle shelf. An investigation of subsurface sedimentary features observed in seismic profiles provides details on the late Quaternary development of the northeastern Gulf of Mexico shelf. Seismic reflection profiles obtained on the inner and mid-shelf regions of northwest Florida reveal an approximately 50 m thickness of late Quaternary sediments, comprised of two and sometimes three discrete clastic sequences. Two lower fluvial sequences total as much as 40–50 m in thickness. A transgressive marine sand deposit overlies the older features in some places, varying in thickness from 0 to 5 m. Identification of seismic facies, combined with stratigraphic data from a suite of coastal boreholes, enables correlation of offshore seismic stratigraphic units with late Tertiary and Quaternary coastal stratigraphy.     

The Quaternary Lancaster Sound trough‐mouth fan,NW Baffin Bay

The development of the Lancaster Sound Trough Mouth Fan (TMF) and glacial history in Arctic Canada were studied using a high‐resolution seismic profile across the entire fan and two piston cores. Stacked tills separated by erosion surfaces on the shelf pass seaward through till deltas into thick transparent glacigenic debris flow (GDF) deposits on the slope, separated by thin, well‐stratified glaciomarine layers. An age model was built by ties to the Ocean Drilling Program Site 645. The deepest GDF on the seismic profile was indicative of the onset of shelf‐crossing glaciation in the Early Pleistocene. The transition of the growth of Lancaster Sound TMF from an aggradational sequence (unit M) to an aggradational–progradational sequence (unit F) occurred at the Middle Pleistocene transition in glacial cyclicity. In the most recent glacial cycle, GDF sheets were deposited during Heinrich events 4 and 2 according to the correlation of the main detrital carbonate beds in two piston cores. The outmost till wedge reflects the maximum advance of the grounding glacier, far seaward of previously proposed Last Glacial Maximum ice extent. Copyright © 2011 John Wiley & Sons, Ltd.