Mineralogical and morphological constraints on the reduction of Fe(III) minerals by Geobacter sulfurreducens

The biologically-mediated reduction of synthetic samples of the Fe(III)-bearing minerals hematite, goethite, lepidocrocite, feroxhyte, ford ferrihydrite, akaganeite and schwertmannite by Geobacter sulfurreducens has been investigated using microbiological techniques in conjunction with X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). This combination of approaches offers unique insights into the influence of subtle variations in the crystallinity of a given mineral on biogeochemical processes, and has highlighted the importance of (oxyhydr)oxide crystallite morphology in determining the changes occurring in a given mineral phase. Problems arising from normalising the biological Fe(III) reduction rates relative to the specific surface areas of the starting materials are also highlighted. These problems are caused primarily by particle aggregation, and compounded when using spectrophotometric assays to monitor reduction. For example, the initial rates of Fe(III) reduction observed for two synthetic feroxyhytes with different crystallinities (as shown by XRD and TEM studies) but almost identical surface areas, differ substantially. Both microbiological and high-resolution TEM studies show that hematite and goethite are susceptible to limited amounts of Fe(III) reduction, as evidenced by the accumulation of Fe(II) during incubation with G. sulfurreducens and the growth of nodular structures on crystalline goethite laths during incubation. Lepidocrocite and akaganeite readily transform into mixtures of magnetite and goethite, and XRD data indicate that the proportion of magnetite increases within the transformation products as the crystallinity of the starting material decreases. The presence of anthraquinone-2,6-disulfonate (AQDS) as an electron shuttle increases both the initial rate and longer term extent of biological Fe(III) reduction for all of the synthetic minerals examined. High-resolution XPS indicates subtle but measurable differences in the Fe(III):Fe(II) ratios at the mineral surfaces following extended incubation. For example, for a poorly crystalline schwertmannite, deconvolution of the Fe2p_3/2 peak suggests that the Fe(III):Fe(II) ratio of the near-surface regions varies from 1.0 in the starting material to 0.9 following 144 h of incubation with G.sulfurreducens, and to 0.75 following the same incubation period in the presence of 10 μM AQDS. These results have important implications for the biogeochemical cycling of iron.     

Adsorption and surface oxidation of Fe(II) on metal (hydr)oxides

The Fe(II) adsorption by non-ferric and ferric (hydr)oxides has been analyzed with surface complexation modeling. The CD model has been used to derive the interfacial distribution of charge. The fitted CD coefficients have been linked to the mechanism of adsorption. The Fe(II) adsorption is discussed for TiO₂, γ-AlOOH (boehmite), γ-FeOOH (lepidocrocite), α-FeOOH (goethite) and HFO (ferrihydrite) in relation to the surface structure and surface sites. One type of surface complex is formed at TiO₂ and γ-AlOOH, i.e. a surface-coordinated Fe²⁺ ion. At the TiO₂ (Degussa) surface, the Fe²⁺ ion is probably bound as a quattro-dentate surface complex. The CD value of Fe²⁺ adsorbed to γ-AlOOH points to the formation of a tridentate complex, which might be a double edge surface complex. The adsorption of Fe(II) to ferric (hydr)oxides differs. The charge distribution points to the transfer of electron charge from the adsorbed Fe(II) to the solid and the subsequent hydrolysis of the ligands that coordinate to the adsorbed ion, formerly present as Fe(II). Analysis shows that the hydrolysis corresponds to the hydrolysis of adsorbed Al(III) for γ-FeOOH and α-FeOOH. In both cases, an adsorbed M(III) is found in agreement with structural considerations. For lepidocrocite, the experimental data point to a process with a complete surface oxidation while for goethite and also HFO, data can be explained assuming a combination of Fe(II) adsorption with and without electron transfer. Surface oxidation (electron transfer), leading to adsorbed Fe(III)(OH)₂, is favored at high pH (pH > ∼7.5) promoting the deprotonation of two Fe_III-OH₂ ligands. For goethite, the interaction of Fe(II) with As(III) and vice versa has been modeled too. To explain Fe(II)-As(III) dual-sorbate systems, formation of a ternary type of surface complex is included, which is supposed to be a monodentate As(III) surface complex that interacts with an Fe(II) ion, resulting in a binuclear bidentate As(III) surface complex.     

Uranyl adsorption onto montmorillonite: Evaluation of binding sites and carbonate complexation

The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO₂²⁺) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10⁻³ M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to [Fe(O,OH)₆] octahedral sites over [Al(O,OH)₆] sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO₂. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO₂.     

Modelling the adsorption of uranyl on the surface of goethite

Atomistic simulations have been carried out to study the adsorption of the hydrated uranyl ion on a variety of faces of goethite (α-FeOOH). The relative stabilities of these faces have been assessed by calculation of the corresponding surface energies. We find that adsorption onto dry stable surfaces yields structures of variance with extended X-ray absorption fine structure data, whilst adsorption onto hydrated (110) and (001) surfaces yields structures compatible with these data.     

Competitive interaction between soil-derived humic acid and phosphate on goethite

In order to better understand the influence and mechanism of soil-derived humic acid (SHA) on adsorption of P onto particles in soils, the amounts of PO₄ adsorbed by synthetic goethite (α-FeOOH) were determined at different concentrations of SHA, pH, ionic strength and order of addition of adsorbents. Addition of SHA can significantly reduce the amount of PO₄ adsorption as much as 27.8%. Both generated electrostatic field and competition for adsorption sites were responsible for the mechanism by which SHA inhibited adsorption of PO₄ by goethite. This conclusion was supported by measurement of total organic C (TOC), infrared spectral features and Zeta potential. Adsorption of PO₄ onto goethite was inversely proportional to pH. Order of addition of PO₄ and SHA can influence adsorption of PO₄ as follows: prior addition of PO₄ ⩾ simultaneous addition > prior addition of SHA. Iron and SHA apparently form complexes due to prior addition of SHA. Observations made during this study emphasized that PO₄ forms different types of complexes on the surface of goethite at different pH, which dominated the interaction of SHA and PO₄ adsorption on goethite. Based on these observations, the possible modes of SHA inhibition of PO₄ adsorption on goethite were proposed.     

Abundance and fractionation of Al,Fe and trace metals following tidal inundation of a tropical acid sulfate soil

Tidal inundation was restored to a severely degraded tropical acid sulfate soil landscape and subsequent changes in the abundance and fractionation of Al, Fe and selected trace metals were investigated. After 5 a of regular tidal inundation there were large decreases in water-soluble and exchangeable Al fractions within former sulfuric horizons. This was strongly associated with decreased soil acidity and increases in pH, suggesting pH-dependent immobilisation of Al via precipitation as poorly soluble phases. The water-soluble fractions of Fe, Zn, Ni and Mn also decreased. However, there was substantial enrichment (2–5×) of the reactive Fe fraction (Fe_R; 1 M HCl extractable) near the soil surface, plus a closely corresponding enrichment of 1 M HCl extractable Cr, Zn, Ni and Mn. Surficial accumulations of Fe(III) minerals in the inter-tidal zone were poorly crystalline (up to 38% Fe_R) and comprised mainly of schwertmannite (Fe₈O₈(OH)₆SO₄) with minor quantities of goethite (α-FeOOH) and lepidocrocite (γ-FeOOH). These Fe (III) mineral accumulations provide an effective substrate for the adsorption/co-precipitation and accumulation of trace metals. Arsenic displayed contrary behaviour to trace metals with peak concentrations (∼60 μg g⁻¹) near the redox minima. Changes in the abundance and fractionation of the various metals can be primarily explained by the shift in the geochemical regime from oxic–acidic to reducing-circumneutral conditions, combined with the enrichment of reactive Fe near the soil surface. Whilst increasing sequestration of trace metals via sulfidisation is likely to occur over the long-term, the current abundance of reactive Fe near the sediment–water interface favours a dynamic environment with respect to metals in the tidally inundated areas.     

Thermal transformations of akaganéite and lepidocrocite to hematite: assessment of possible precursors to Martian crystalline hematite

We examine the possibility that crystalline hematite (α-Fe₂O₃) deposits on Mars were derived from the precursor iron oxyhydroxide minerals akaganéite (β-FeOOH) or lepidocrocite (γ-FeOOH) and compare them to an earlier study of goethite (α-FeOOH) and magnetite (Fe₃O₄) precursors. Both the mid-infrared and visible/near infrared spectra of hematite are dependent upon the hematite precursor mineral and the temperature of transformation. Laboratory spectra are compared to spectra from the Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES) and the Mars Exploration Rover (MER) Opportunity Mini-TES and Pancam experiments, allowing us to infer the formation environment of Martian crystalline hematite deposits. Akaganéite and lepidocrocite readily transform to hematite at temperatures of 300 and 500°C, respectively. The visible/near-infrared and mid-infrared spectra of akaganéite-derived hematite are poor matches to data returned from TES, Mini-TES, and Pancam. The spectra of lepidocrocite-derived hematite are slightly better fits, but previously published spectra of goethite-derived hematite still represent the best match to MGS and MER spectral data. The experiments demonstrate that hematite precursor mineralogy, temperature of formation, and crystal shape exert a strong control on the hematite spectra.     

Evidence for a simple pathway to maghemite in Earth and Mars soils

Soil magnetism is greatly influenced by maghemite (γ-Fe₂O₃), the presence of which is usually attributed to the following: (1) heating of goethite in the presence of organic matter; (2) oxidation of magnetite (Fe₃O₄); or (3) dehydroxylation of lepidocrocite (γ-FeOOH). Formation of the latter two minerals in turn requires the presence of Fe(II) in the system. No laboratory experiment or soil study to date has shown whether maghemite can form from ferrihydrite, a poorly crystalline Fe(III) oxide [∼Fe_4.5(O,OH,H₂O)_13.5], below 250°C. However, ferrihydrite is the usual precursor of goethite (α-FeOOH) and hematite (α-Fe₂O₃), the most frequently occurring crystalline Fe(III) oxides in soils. Here is presented in vitro evidence that ferryhidrite can partly transform into maghemite at 150°C. This transformation occurs upon aging of ferrihydrite precipitated in the presence of phosphate or other ligands capable of ligand exchange with Fe-OH surface groups. This maghemite coexists with hematite and is a transient phase in the transformation of ferrihydrite to hematite, which is apparently stabilized by the adsorbed ligands. Its particle size is small (10 to 30 nm), and its X-ray diffraction pattern exhibits superstructure reflections. The possible formation of maghemite in Mars and in different Earth soils can partly be explained in the light of this pathway with minimal ad hoc assumptions.     

Redox potential measurements and Mössbauer spectrometry of Fe adsorbed onto Fe (oxyhydr)oxides

The redox properties of Fe^II adsorbed onto a series of Fe^III (oxyhydr)oxides (goethite, lepidocrocite, nano-sized ferric oxide hydrate (nano-FOH), and hydrous ferric oxide (HFO)) have been investigated by rest potential measurements at a platinum electrode, as a function of pH (−log₁₀[H⁺]) and surface coverage. Using the constant capacitance surface complexation model to describe Fe^II adsorption onto these substrates, theoretical values of the suspension redox potential (E_H) have been computed, under the assumption that Fe^II adsorption occurs at crystal growth sites of the substrate surface. Good agreement between calculated and experimental E_H values is observed for nano-FOH and HFO, however the redox potentials measured for lepidocrocite and goethite are significantly more oxidizing than predicted. Mössbauer spectroscopic analysis of ⁵⁷Fe^II adsorbed onto HFO and goethite shows that in both cases the adsorbed ⁵⁷Fe^II is incorporated into the crystal structure of the substrate, in broad agreement with the thermodynamic model, but is almost completely oxidized to ⁵⁷Fe^III. The mechanism by which the adsorbed ⁵⁷Fe^II is oxidized is not resolved in this work, but is thought to be due to electron transfer to the substrate, rather than a net oxidation of the suspension. The disagreement between experimental and calculated rest potential measurements in the goethite and lepidocrocite systems is thought to be due to the poor electrochemical equilibration of these suspensions with the platinum electrode, rather than a failure of the thermodynamic model. The model developed for the redox potential of adsorbed Fe^II allows direct assessment of the reactivity of this species towards oxidized pollutants.     

Chemistry and mineralogy of ochreous sediments in a constructed mine drainage wetland

The objective of this study was to examine the mineralogy and geochemical stability of ochreous sediments accumulated in a compost wetland constructed in 1990 for acid mine drainage treatment. Intact sediment cores were collected in 1996 and 2000 from an area that had accumulated 33 cm of ochre. Solids and pore waters were subsequently separated by centrifugation and analyzed using conventional methods, including X-ray diffraction, infrared spectroscopy, scanning electron microscopy, and wet chemical techniques. The solid phase had an average Fe content of 585 g/kg and was predominantly schwertmannite [Fe ₈O₈(OH)_4.8(SO₄)_1.6] in the upper portion of the sediment column, but transformed to goethite (α-FeOOH) with depth. The rate of transformation was calculated to be 30 mol/m³/yr in the initial 6 yr of sedimentation as compared to 10 mol/m³/yr for the 4-yr period from 1996 to 2000. Pore water composition was affected by this mineral transformation through production of acidity and the release of Fe and SO₄. These results demonstrate that the sediment column was not a static environment. In addition, the transformation of schwertmannite to goethite, which has been observed under laboratory conditions, also occurs in natural systems.     

Solidsolution interaction: The effect of carbonate alkalinity on adsorbed thorium

Elevated activities of dissolved Th have been found in Soap Lake, an alkaline lake in Eastern Washington. Dissolved ²³²Th ranges from less than 0.001 to 4.9 dpm/L compared to about 1.3 × 10⁻⁵ dpm/ L in sea water. The enhanced activity in the lake coincides with an increase in carbonate alkalinity. Experiments were conducted to evaluate the effect of pH, ionic strength and carbonate alkalinity on Th adsorption on goethite. Thorium (10⁻¹³ M total) in the presence of 5.22 mg/L α-FeOOH and 0.1 M NaNO₃ has an adsorption edge from pH 2–5. At pH 9.0 ± 0.6 the percent Th absorbed on the solid began to decrease from 100% at 100 meq/L carbonate alkalinity and exhibited no adsorption above 300 meq/L. The experimental data were modeled to obtain the intrinsic adsorption equilibrium constants for Th hydrolysis species. These adsorption constants were incorporated in the model to interpret the observed effect of carbonate alkalinity on Th adsorption. There are two main effects of the alkalinity. To a significant degree the decrease in Th adsorption is due to competition of HCO⁻₃ and CO²⁻₃ ions for surface sites. Dissolved Th carbonate complexes also contribute to the increase of Th in solution.     

Schwertmannite transformation to goethite via the Fe(II) pathway: Reaction rates and implications for iron-sulfide formation

Schwertmannite (Fe₈O₈(OH)₆SO₄) is a common Fe(III)-oxyhydroxysulfate mineral in acid-sulfate systems, where its formation and fate strongly influence water quality. The present study examines transformation of schwertmannite to goethite (FeOOH), as catalyzed by interactions with Fe(II) in anoxic aquatic environments. This study also evaluates the role of the Fe(II) pathway in influencing the formation of iron-sulfide minerals in such environments. At pH > 5, the rates of Fe(II)-catalyzed schwertmannite transformation were several orders of magnitude faster than transformation in the absence of Fe(II). Complete transformation of schwertmannite occurred within only 3-5 h at pH > 6 and Fe(II)_(aq) ? 5 mmol L⁻¹. Model calculations indicate that the Fe(II)-catalyzed transformation of schwertmannite to goethite greatly decreases the reactivity of the Fe(III) pool, thereby favoring SO₄-reduction and facilitating the formation of iron-sulfide minerals (particularly mackinawite, tetragonal FeS). Examination of in situ sediment geochemistry in an acid-sulfate system revealed that the rapid Fe(II)-catalyzed transformation was consistent with an abrupt shift from an acidic Fe(III)-reducing regime with abundant schwertmannite near the sediment surface, to a near-neutral mackinawite-forming regime where goethite was dominant. This study demonstrates that the Fe(II) pathway exerts a major influence on schwertmannite transformation and iron-sulfide formation in anoxic acid-sulfate systems. These findings have important implications for understanding acidity dynamics and trace element mobility in such systems.     

The structure and transformation of the nanomineral schwertmannite: a synthetic analog representative of field samples

The phase transformation of schwertmannite, an iron oxyhydroxide sulfate nanomineral synthesized at room temperature and at 75 °C using H₂O₂ to drive the precipitation of schwertmannite from ferrous sulfate (Regenspurg et al. in Geochim Cosmochim Acta 68:1185–1197, 2004), was studied using high-resolution transmission electron microscopy. The results of this study suggest that schwertmannite synthesized using this method should not be described as a single phase with a repeating unit cell, but as a polyphasic nanomineral with crystalline areas spanning less than a few nanometers in diameter, within a characteristic ‘pin-cushion’-like amorphous matrix. The difference in synthesis temperature affected the density of the needles on the schwertmannite surface. The needles on the higher-temperature schwertmannite displayed a dendritic morphology, whereas the needles on the room-temperature schwertmannite were more closely packed. Visible lattice fringes in the schwertmannite samples are consistent with the powder X-ray diffraction (XRD) pattern taken on the bulk schwertmannite and also matched d-spacings for goethite, indicating a close structural relationship between schwertmannite and goethite. The incomplete transformation from schwertmannite to goethite over 24 h at 75 °C was tracked using XRD and TEM. TEM images suggest that the sample collected after 24 h consists of aggregates of goethite nanocrystals. Comparing the synthetic schwertmannite in this study to a study on schwertmannite produced at 85 °C, which used ferric sulfate, reveals that synthesis conditions can result in significant differences in needle crystal structure. The bulk powder XRD patterns for the schwertmannite produced using these two samples were indistinguishable from one another. Future studies using synthetic schwertmannite should account for these differences when determining schwertmannite’s structure, reactivity, and capacity to take up elements like arsenic. The schwertmannite synthesized by the Regenspurg et al. method produces a mineral that is consistent with the structure and morphology of natural schwertmannite observed in our previous study using XRD and TEM, making this an ideal synthetic method for laboratory-based mineralogical and geochemical studies that intend to be environmentally relevant.     

Geochemical behaviour of iron and manganese ions in the Ningyo-Toge uranium deposit district, southwest Japan

The Ningyo-Toge uranium deposit is one of the typical sedimentary uranium deposits in Japan. In general, during weathering, U is removed from the basal granite through underground water. The underground water in this area is rich in U, and has a comparatively high concentration of Fe and Mn.

In this area, three types of Fe minerals can be recognized in different modes of occurrence: (1) in the oxide zone brownish Fe-hydroxide mineral with ferric ion, i.e. goethite (-FeOOH); (2) in the reduced zone of the mine gallery pale-blue Fe-hydroxide mineral with some ferrous ion, i.e. lepidocrocite (γ-FeOOH); and (3) Fe-sulphate minerals such as melanterite (FeSO₄·7H₂O), etc. Some uranyl sulphate minerals, uranopilite and zippeite, are closely associated with these Fe-sulphate minerals. Under weakly alkaline conditions of the oxidizing environment, Mn-hydroxide (MnOOH) coexists with goethite as alternative thin laminae with shale, or coprecipitates resembling a marine Mn nodule, in the size of 0.5 cm in diameter. Radioactive anomalies have been recognized frequently for these Mn sediments due to absorption of Ra by the sediments.     

Spatial variability of arsenic in some iron-rich deposits generated by acid mine drainage

Potential contamination of rivers by trace elements can be controlled, among others, by the precipitation of oxyhydroxides. The streambed of the studied area, located in “La Châtaigneraie” district (Lot River Basin, France), is characterised by iron-rich ochreous deposits, acidic pH (2.7–4.8) and SO₄–Mg waters. Beyond the acid mine drainage, the presence of As both in the dissolved fraction and in the deposits is also a problem. Upstream, at the gallery outlet, As concentrations are high (As_max = 2.6 μmol/l and up to 5 wt% locally, respectively, in the dissolved and in the solid fractions). Downstream, As concentrations decrease below 0.1 μmol/l in the dissolved fraction and to 1327 mg/kg in the solid fraction. This natural attenuation is related to the As retention within ochreous precipitates (amorphous to poorly crystalline Fe oxyhydroxides, schwertmannite and goethite), which have great affinities for this metalloid. Upstream, schwertmannite is dominant while downstream, goethite becomes the main mineral. The transformation of schwertmannite into goethite is observed in the upstream deposits as schwertmannite is unstable relative to goethite. Furthermore, thermodynamic calculations indicate that the downstream goethite is not able to precipitate in situ according to the water chemistry. Goethite mainly results from the transformation of schwertmannite and its solid transport downstream.Moreover, as highlighted by leaching experiments carried out on the ochreous precipitates, this transformation does not seem to affect the As-retention in solids as no release of As was observed in the solution. Arsenic may either be strongly trapped by co-precipitation in the present minerals or it may be quickly released and re-adsorbed on the precipitate surface.     

Electronic structures of iron(III) and manganese(IV) (hydr)oxide minerals: Thermodynamics of photochemical reductive dissolution in aquatic environments

Sunlight-induced reduction and dissolution of colloidal Fe-Mn (hydr)oxide minerals yields elevated concentrations of Fe²⁺ and Mn²⁺ in natural waters. Since these elements may be biolimiting micronutrients, photochemical reactions might play a significant role in biogeochemical cycles. Reductive photodissolution of Fe (hydr)oxide minerals may also release sorbed metals. The reactivity of Fe-Mn (hydr)oxide minerals to sunlight-induced photochemical dissolution is determined by the electronic structure of the mineral-water interface. In this work, oxygen K-edge absorption and emission spectra were used to determine the electronic structures of iron(III) (hydr)oxides (hematite, goethite, lepidocrocite, akaganeite and schwertmannite) and manganese(IV) oxides (pyrolusite, birnessite, cryptomelane). The band gaps in the iron(III) (hydr)oxide minerals are near 2.0-2.5 eV; the band gaps in the manganese (IV) oxide phases are 1.0-1.8 eV. Using published values for the electrochemical flat-band potential for hematite together with experimental pH_pzc values for the (hydr)oxides, it is possible to predict the electrochemical potentials of the conduction and valence bands in aqueous solutions as a function of pH. The band potentials enable semiquantitative predictions of the susceptibilities of these minerals to photochemical dissolution in aqueous solutions. At pH 2 (e.g., acid-mine waters), photoreduction of iron(III) (hydr)oxides could yield millimolal concentrations of aqueous Fe²⁺ (assuming surface detachment of Fe²⁺ is not rate limiting). In seawater (pH 8.3), however, the direct photo-reduction of colloidal iron(III) (hydr)oxides to give nanomolal concentrations of dissolved, uncomplexed, Fe²⁺ is not thermodynamically feasible. This supports the hypothesis that the apparent photodissolution of iron(III) (hydr)oxides in marines systems results from Fe³⁺ reduction by photochemically produced superoxide. In contrast, the direct photoreduction of manganese oxides should be energetically feasible at pH 2 and 8.3.     

Structures and stabilities of Cd(II) and Cd(II)-phthalate complexes at the goethite/water interface

The complexation of Cd(II) and Cd(II)-phthalate at the goethite/water interface were investigated by EXAFS and IR spectroscopy, by batch adsorption experiments and by potentiometric titrations at 298.15 K. The EXAFS spectra showed Cd(II) to form only inner-sphere corner-sharing complexes with the goethite surface sites in the presence and absence of phthalate. EXAFS spectra also showed the presence of Cd(II)-chloride complexes in 0.1 mol/L NaCl. IR spectra also showed phthalate to form (1) an inner-sphere complex with adsorbed corner-sharing Cd(II) surface complexes in the pH 3.5 to 9.5 and (2) an outer-sphere complex with the same type of corner-sharing Cd(II) complex however at pH > 6, in addition to the inner- and outer-sphere complexes of phthalate reported in a previous study. The potentiometric titration and the batch adsorption data were used to constrain the formation constants of the different Cd(II)-phthalate surface complexes on the dominant {110} and the {001} planes of the goethite. The models were carried out with the Charge Distribution Multisite Complexation model coupled to the Three Plane Model and can predict the molecular-scale speciation of cadmium and phthalate in the presence of goethite. Cd(II) adsorption models calibrated on a 90 m²/g goethite also could accurately predict experimental data for a 37 m²/g goethite of slightly different basic charging properties.     

The adsorption of plutonium IV and V on goethite

The adsorption of Pu(IV) and Pu(V) on goethite (αFeOOH) from NaNO₃ solution shows distinct differences related to the different hydrolytic character of these two oxidation states. Under similar solution conditions, the adsorption edge of the more strongly hydrolyzable Pu(IV) occurs in the pH range 3 to 5 while that for Pu(V) is at pH 5 to 7. The adsorption edge for Pu(V) shifts with time to lower pH values and this appears to be due to the reduction of Pu(V) to Pu(IV) in the presence of the goethite surface. These results suggest that redox transformations may be an important aspect of Pu adsorption chemistry and the resulting scavenging of Pu from natural waters.Increasing ionic strength (from 0.1 M to 3 M NaCl or NaNO₃ and 0.03 M to 0.3 M Na₂SO₄) did not influence Pu(IV) or Pu(V) adsorption. In the presence of dissolved organic carbon (DOC), Pu(V) reduction to Pu(IV) occurred in solution. Pu(IV) adsorption on goethite decreased by 30% in the presence of 240 ppm natural DOC found in Soap Lake, Washington waters. Increasing concentrations of carbonate ligands decreased Pu(IV) and Pu(V) adsorption on goethite, with an alkalinity of 1000 meq/l totally inhibiting adsorption.The Pu-goethite adsorption system provides the data base for developing a thermodynamic model of Pu interaction with an oxide surface and with dissolved ligands, using the MINEQL computer program. From the model calculations we determined equilibrium constants for the adsorption of Pu(IV) hydrolysis species. The model was then applied to Pu adsorption in carbonate media to see how the presence of CO₃^?2 could influence the mobility of Pu. The decrease in adsorption appears to be due to formation of a Pu-CO₃ complex. Model calculations were used to predict what the adsorption curves would look like if Pu-CO₃ complexes formed.     

Photodissolution of lepidocrocite (γ-FeOOH) in the presence of desferrioxamine B and aerobactin

Batch adsorption and dissolution experiments with lepidocrocite (γ-FeOOH) and two siderophores, desferrioxamine B (DFOB) and aerobactin, were performed between pH 3 and 8 in the dark and under irradiation with UV-visible light. The increase in surface concentrations of adsorbed DFOB with increasing pH was explained in terms of electrostatic interactions between the protonated and charged terminal amine group of DFOB surface complexes and the charged lepidocrocite surface. The adsorption of aerobactin was consistent with the typical anion-like adsorption behavior of low molecular weight organic acids and indicated that the adsorption properties are strongly determined by the carboxylic acid groups. The adsorption experiments revealed furthermore that the Fe(III)-DFOB solution complex has a very low affinity for the surface, in contrast to Fe(III)-aerobactin solution complexes. In accordance with a surface-controlled mechanism of ligand-promoted dissolution, we found a linear correlation between dissolution rates of lepidocrocite and the surface concentrations of adsorbed DFOB. In the dark, 6- to 8-fold lower dissolution rate coefficients were determined for aerobactin in comparison to DFOB. These results suggested that aerobactin forms surface complexes that are less dissolution-active, characterized by a higher degree of multinuclear surface complexation and/or by less dissolution-active coordination modes of the involved iron-binding groups. For both DFOB and aerobactin, dissolution rate coefficients increased significantly under irradiation with UV-visible light. This increase was interpreted in terms of light-induced reduction of surface Fe(III), primarily by intrinsic photochemical processes of the lepidocrocite bulk phase, based on the observed photoreductive dissolution in the absence of organic ligands between pH 3 and 6. We hypothesize that the α-hydroxycarboxylate group of aerobactin may form a surface complex that additionally promotes photoreductive dissolution by a ligand-to-metal charge-transfer (LMCT) reaction, similar to citrate. However, LMCT reactions involving the α-hydroxycarboxylate group of aerobactin are rather ineffective, based on the comparison of light-induced dissolution rate coefficients determined in the presence of aerobactin and citrate.     

Assessing mine drainage pH from the color and spectral reflectance of chemical precipitates

The pH of mine impacted waters was estimated from the spectral reflectance of resident sediments composed mostly of chemical precipitates. Mine drainage sediments were collected from sites in the Anthracite Region of eastern Pennsylvania, representing acid to near neutral pH. Sediments occurring in acidic waters contained primarily schwertmannite and goethite while near neutral waters produced ferrihydrite. The minerals comprising the sediments occurring at each pH mode were spectrally separable. Spectral angle difference mapping was used to correlate sediment color with stream water pH (r²=0.76). Band-center and band-depth analysis of spectral absorption features were also used to discriminate ferrihydrite and goethite and/or schwertmannite by analyzing the ⁴T₁←⁶A₁ crystal field transition (900–1000 nm). The presence of these minerals accurately predicted stream water pH (r²=0.87) and provided a qualitative estimate of dissolved SO₄ concentrations. Spectral analysis results were used to analyze airborne digital multispectral video (DMSV) imagery for several sites in the region. The high spatial resolution of the DMSV sensor allowed for precise mapping of the mine drainage sediments. The results from this study indicate that airborne and space-borne imaging spectrometers may be used to accurately classify streams impacted by acid vs. neutral-to-alkaline mine drainage after appropriate spectral libraries are developed.