Tectonic incorporation of the upper part of oceanic crust to overriding plate of a convergent margin: An example from the Cretaceous–early Tertiary Mugi Mélange, the Shimanto Belt, Japan

A tectonic mélange exposed on land is examined to reveal relationships between mélange formation, underplating, and deformation mechanisms, focusing on the deformation of basaltic rocks. The studied Mugi Mélange of the Shimanto Belt is composed of a shale matrix surrounding various blocks of sandstone, pelagic sediments, and basalts. The mélange was formed during Late Cretaceous to early Tertiary times in a subduction zone under P–T conditions of 150–200 °C and 6–7 km depth as estimated from vitrinite reflectance and quartz veins fluid inclusions. The mélange represents a range of deformation mechanisms; pressure solution with micro-scale cataclasis in the shale matrix, brittle tension cracking in the blocks, and ubiquitous strong cataclasis in the basal portion of basaltic layers. The cataclastic deformation in the basalts suggests a breakage of a topographic high in the seismogenic depth.     

Deformation Style of Slickenlines on Mélange Foliations and Change in Deformation Mechanisms Along Subduction Interface: Example from the Cretaceous Shimanto Belt, Shikoku, Japan

Accretionary complexes record the histories of changes in physical properties of sediments from unlithified sediments to lithified rocks through the deformation processes along subduction interface. The trench sediment suffered various deformation of particulate flow, pressure solution deformation and cataclastic faultings from ductile to brittle regime during accretion in subduction zone. Tectonic mélange is a characteristic rock in on-land accretionary complexes. The dominant deformation mechanism of tectonic mélange formation is pressure solution on the basis of microscopic observation. However, brittle slickenlines are also commonly observed on mélange foliations at the outcrop scale. Although the slickenlines as a brittle failure is common on the surface of the pressure solution foliation, the relationship of their kinetic are still uncertain. Detailed observations of slickenlines suggest that they are formed by reactivation of the mélange foliations, which indicates that the slickenlines are developed after formation of block in matrix texture characterized in mélange. In addition, mélange foliations are cut by faults related to underplating of oceanic materials. Therefore, formation of slickenlines occur before underplating in a relatively deep portion along subduction interface. On the basis of P-T conditions reported from other parts of the Cretaceous Shimanto Belt, the mélange formation and underplating is inferred to have occurred around the seismic front or within the seismogenic zone. The change in deformation mechanisms from pressure solution to brittle failure may be the first change in physical properties from plastic to brittle around seismic front.     

Geology of the Talaud Islands, molucca sea collision zone, northeast Indonesia

The Talaud Islands lie at the northern margin of the collision zone between the Sangihe and Halmahera island arc systems. Rock units on Talaud are Neogene marine strata, basalt and andesite, tectonic mélange, and ophiolite. The units are exposed in N–S trending belts that are commonly separated by faults. The marine strata consist of tuffaceous siltstone, sandstone, shale and marl. They are strongly deformed by west-verging folds with wavelengths of 20–500 m. Volcanic rocks of island arc affinity are exposed on the east coast of Karakelang Island and appear to be interbedded with the lowermost marine strata. Tectonic mélanges contain blocks of serpentinite, gabbro, basalt, red middle Eocene chert and limestone, and greywacke turbidites. The blocks range in length from a few millimetres to hundreds of metres, and are enclosed in a scaly clay matrix. Several mappable slabs of ophiolite are separated by Tertiary strata or mélange. The dismembered ophiolites consist of serpentized peridotite, gabbro, spilites and cherts. Locally, the mélanges and ophiolites are thrust over the younger sedimentary rocks along east-dipping faults. The dominant eastward dips of mélange foliation, the westward vergence of structures in the Neogene strata, the Eocene ages of the cherts, and the Miocene age of the strata overlying the ophiolite slabs suggest that the ophiolites are pieces of Eocene or older oceanic crust (derived from a mid-ocean ridge or back-arc basin) and upper mantle that were emplaced as thrust slices into the lower slope of a west-facing arc during the Miocene and have been uplifted during arc—arc collision.     

Large P–T gap between Ballantrae blueschist/garnet pyroxenite and surrounding ophiolite, southern Scotland, UK: Diapiric exhumation of a Caledonian serpentinite mélange

The Ballantrae ophiolite in southern Scotland includes a NEE–SWW-trending serpentinite mélange that contains blocks of mafic blueschist and high-pressure, granulite facies, metapyroxenite (Sm–Nd metamorphic age: 576 ± 32 and 505 ± 11 Ma). Tectonic blocks of mafic schist are less than 3 × 3 m in size, and have greenschist, blueschist or epidote amphibolite facies assemblages corresponding to the high-pressure intermediate-type metamorphic facies series.Adjacent rocks of the serpentinite mélange are hydrothermally-altered MORB-like ophiolitic basalt (prehnite–pumpellyite facies), dolerite (actinolite–oligoclase sub-facies) and gabbro (amphibolite facies), all with assemblages that are diagnostic of the low-pressure metamorphic facies series.The difference in metamorphic facies series and parageneses of minerals between the high-pressure mafic blocks and the adjacent, low-pressure ophiolitic meta-basic rocks suggests that the former were exhumed from > 25 km depth within a cold subducted slab, and were juxtaposed with the latter, the bottom of a MORB-like ophiolite in the hanging wall of a trench. An ENE–WSW-trending, 501 ± 12 Ma volcanic arc belt extends for 3 km south of the serpentinite mélange. We suggest that ridge subduction associated with a slab window created arc-related gabbro (483 ± 4 Ma) at Byne Hill and within-plate gabbro (487 ± 8 Ma) at Millenderdale. Final continental collision created the duplex structure of the Ballantrae complex that includes the HP blocks and serpentinite mélange. These relations define diapiric exhumation in the Caledonian orogen of SW Scotland.     

Late proterozoic terrane tectonics in the central Jiangnan belt, southeast China

The Huaiyu and Jiuling terranes in the central Jiangnan belt, south China, are separated by the Dongxiang-Shexian shear zone. An Upper Proterozoic ophiolite-bearing mélange is dispersed along the contact. Isotopic ages of mafic and ultramafic rocks within the mélange cluster around 1000 Ma (Sm-Nd method). Glaucophanes from blueschist yield an isotopic age of 866 Ma (K-Ar method), interpreted to date the timing of collision. The mélange and terranes underwent regional metamorphism during the Late Proterozoic. The resulting foliation was later crosscut by a Late Proterzoic sinistral oblique normal shear along the suture zone. Clastic sediments were unconformably deposited over both terranes during the Sinian (latest Proterozoic).     

Ocean Plate Stratigraphy in East and Southeast Asia

Ancient accretionary wedges have been recognised by the presence of glaucophane schist, radiolarian chert and mélange. Recent techniques for the reconstruction of disrupted fragments of such wedges by means of radiolarian biostratigraphy, provide a more comprehensive history of ocean plate subduction and successive accretion of ocean floor materials from the oceanic plate through offscraping and underplating.Reconstructed ocean floor sequences found in ancient accretionary complexes in Japan comprise, from oldest to youngest, pillow basalt, limestone, radiolarian chert, siliceous shale, and shale and sandstone. Similar lithologies also occur in the mélange complexes of the Philippines, Indonesia, Thailand and other regions. This succession is called ‘Ocean Plate Stratigraphy’ (OPS), and it represents the following sequence of processes: birth of the oceanic plate at the oceanic ridge; formation of volcanic islands near the ridge, covered by calcareous reefs; sedimentation of calcilutite on the flanks of the volcanic islands where radiolarian chert is also deposited; deposition of radiolarian skeletons on the oceanic plate in a pelagic setting, and sedimentary mixing of radiolarian remains and detrital grains to form siliceous shale in a hemipelagic setting; and sedimentation of coarse-grained sandstone and shale at or near the trench of the convergent margin.Radiolarian biostratigraphy of detrital sedimentary rocks provides information on the time and duration of ocean plate subduction. The ages of detrital sediments becomes younger oceanward as younger packages of OPS are scraped off the downgoing plate.OPS reconstructed from ancient accretionary complexes give us the age of subduction and accretion, direction of subduction, and ancient tectonic environments and is an important key to understanding the paleoenvironment and history of the paleo-oceans now represented only in suture zones and orogenic belts.     

Geologic correlation between the Neoproterozoic Sergipano belt (NE Brazil) and the Yaoundé belt (Cameroon, Africa)

The Yaoundé belt (Cameroon) and the Sergipano belt (NE Brazil) belonged to a major and continuous Neoproterozoic orogen at the northern margin of the ancient Congo-São Francisco craton. The Yaoundé belt comprises schists, quartzites, gneisses and migmatitic gneisses grouped into three domains; the low-grade Mbalmayo Group in south and the medium- to high-grade Yaoundé and Bafia Group in north. The Sergipano belt is divided into six domains, the three southernmost of which are mostly made up of clastic and chemical metasedimentary rocks whereas the others are more diverse with a migmatite–gneiss complex, and two metavolcanicplutonic complexes. In general, the two belts show structural vergence and decrease of metamorphic grade towards the craton; three main deformation phases are recognized in the Sergipano belt in contrast with two described in the Yaoundé belt. The minimum age of Pan-African-Brasiliano collision in the Sergipano belt is constrained at 628 ± 12 Ma on syn-collision granites, whereas in the Yaoundé belt collision took place between 620 and 610 Ma, i.e. the age of granulite facies metamorphism. Sm–Nd isotope geochemistry and U–Pb age dating indicate that most clastic metasedimentary rocks in both belts were derived from sources to the north and, to a lesser degree, from the cratons to the south.     

南祁连拉脊山口增生楔的结构与组成特征

造山带内增生楔/增生杂岩结构与组成的精细研究可为古洋盆演化和古板块构造格局重建提供最直接证据。北祁连构造带发育多条增生杂岩带,记录了阿拉善和中祁连地块之间原特提斯洋的俯冲和闭合过程,然而南祁连构造带大地构造演化长期存在争议。地质填图结果表明,南祁连构造带拉脊山口地区存在一套强烈片理化的玄武岩、灰黑色和红色硅质岩、砂岩和泥岩组合,它们与一套呈现"块体裹夹于基质"结构特征的混杂岩共同构成了增生杂岩,发育双重逆冲构造、逆冲断层、无根褶皱、紧闭褶皱和透入性面理。该增生杂岩与蛇绿岩之间为断层接触,并位于断层下盘。混杂岩是由斜长花岗岩(561Ma)、斜长岩(507Ma)、辉绿岩、玄武岩、硅质岩和砂岩等外来或原地岩块与浊流成因的细碎屑岩基质共同组成;基质和砂岩块体均发育同沉积构造,呈现出滑塌堆积典型特征。空间上,拉脊山口增生杂岩与上覆蛇绿岩被断层所分割且共同仰冲于中祁连南缘青石坡组浊积岩之上,具有与东侧昂思多地区增生杂岩和蛇绿岩相似的岩石组成、构造变形和时空结构特征。它们与南侧的岛弧带共同构成了南祁连构造带寒武纪-早奥陶世沟-弧体系,指示了寒武纪-早奥陶世时期南祁连洋盆向南俯冲。     

U/Pb and Sm/Nd geochronologic studies of the eastern Borborema Province, Northeastern Brazil: initial conclusions

The Borborema Province of NE Brasil comprises the central part of a wide Pan-African-Brasiliano orogenetic belt that formed as a consequence of late Neoproterozoic convergence and collision of the São Luis-West Africa craton and the São Francisco-Congo-Kasai cratons. New Sm/Nd and U/Pb results from the eastern part of this province help to define the basic internal architecture and pre-collisional history of this province, with particular emphasis on delineating older cratonic terranes, their fragmentation during the Mesoproterozoic, and their assembly into West Gondwana during the Pan African-Brasiliano orogeny at ca. 600 Ma.The region can be divided into three major geotectonic domains: a) Rio Piranhas-Caldas Brandão massif, with overlying Paleoproterozoic to Neoproterozoic supracrustal rocks, north of the Patos Lineament; b) the Archean to Paleoproterozoic São Francisco craton (SFC) to the south; and c) a complex domain of Paleoproterozoic to Archean basement blocks with several intervening Mesoproterozoic to Neoproterozoic fold belts in the center (south of Patos Lineament and north of SFC). The northern and central domains comprise the Borborema Province.Archean basement gneiss and Transamazonian granulite of northern SFC are exposed in the southern part of the central domain, underlying southern parts of the Sergipano fold belt. Basement in the Rio Piranhas massif appears to consist mostly of Transamazonian (2.1 to 2.2 Ga) gneissic rocks; Nd model ages (T_DM) of ca. 2.6 Ga for 2.15 Ga gneisses indicate a substantial Archean component in the protoliths to these gneisses. The Caldas Brandão massif to the east yields both Transamazonian and Archean U/Pb zircon and Nd (T_DM) ages, indicating a complex architecture. Metasedimentary rocks of the Jucurutu Formation yield detrital zircons with original crystallization ages as young as 1.8 Ga, indicating that these rocks may be late Paleoproterozoic and correlate with other ca. 1.8 Ga cratonic supracrustal rocks in Brazil such as the Roraima Group and Espinhaço Group.Most metavolcanic and pre-Brasiliano granitic units of the Sergipano (SDS), Pajeú-Paraíba (SPP), Riacho Pontal (SRP), and Piancó-Alto Brígida (SPAB) fold belts in the central domain formed ˜ 1.0 ± 0.1 Ga, based on U/Pb ages of zircons. Nd model ages (T_DM) for these same rocks, as well as Brasiliano granites intruded into them and large parts of the Pernambuco-Alagoas massif, are commonly 1.3–1.7 Ga, indicating that rocks of the fold belts were not wholly derived from either older (> 2.1 Ga) or juvenile (ca. 1.0 Ga) crust, but include mixtures of both components. A simple interpretation of Brasiliano granite genesis and the Nd data implies that there is no Transamazonian or Archean basement underlying large parts of these fold belts or of the Pernambuco-Alagoas massif. An exception is a belt of syenitic Brasiliano plutons (Syenitoid Line) and host gneisses between SPAB and SPP that clearly has a Transamazonian (or older) source. In addition, there are several smaller blocks of Archean to Transamazonian gneiss that can be defined within and among these fold belts. These blocks do not appear to constitute a continuous basement complex, but appear to be isolated older crustal fragments.Our data support a model in which ca. 1.0 Ga rifting was an important tectonic and crust-forming event along the northern edge of the São Francisco craton. Our data also show that significant parts of the Borborema Province are not remobilized Transamazonian to Archean crust, but that Mesoproterozoic crust is a major feature of the Province. There are several small remnants of older crust within the area dominated by Mesoproterozoic crust, suggesting that the rifting event created several small continental fragments that were later incorporated into the Brasiliano collisional orogen. We cannot at present determine if the Rio Piranhas-Caldas Brandão massifs and the older crustal blocks of the central domain were originally part of the São Francisco craton or whether some (or all) of them came from more exotic parts of the Proterozoic Earth. Finally, our data have not yet revealed any juvenile terranes of either Transamazonian or Brasiliano age.     

Geodynamic significance of the Raspas Metamorphic Complex (SW Ecuador): geochemical and isotopic constraints

The Raspas Metamorphic Complex of southwestern Ecuador is regarded as the southernmost remnant of oceanic and continental terranes accreted in the latest Jurassic–Early Cretaceous. It consists of variably metamorphosed rock types. (1) Mafic and ultramafic rocks metamorphosed under high-pressure (HP) conditions (eclogite facies) show oceanic plateau affinities with flat REE chondrite-normalized patterns, Nd_{150 Ma} ranging from +4.6 to 9.8 and initial Pb isotopic ratios intermediate between MORB and OIB. (2) Sedimentary rocks metamorphosed under eclogitic conditions exhibit LREE enriched patterns, strong negative Eu anomalies, Rb, Nb, U, Th, Pb enrichments, low Nd_{150 Ma} values (from −6.4 to −9.5), and high initial ⁸⁷Sr/⁸⁶Sr and ^206,207,208Pb/²⁰⁴Pb isotopic ratios suggesting they were originally sediments derived from the erosion of an old continental crust. (3) Epidote-bearing amphibolites show N-MORB affinities with LREE depleted patterns, LILE, Zr, Hf and Th depletion, high Nd_{150 Ma} (>+10) and low initial Pb isotopic ratios.The present-day well defined internal structure of the Raspas Metamorphic Complex seems to be inconsistent with the formerly proposed interpretation of a “tectonic mélange”. The association of oceanic plateau rocks and continent-derived sediments both metamorphosed in HP conditions suggests that the thin edge of the oceanic plateau first entered the subduction zone and dragged sediments downward of the accretionary wedge along the Wadatti–Benioff zone. Subsequently, when its thickest part arrived into the subduction zone, the oceanic plateau jammed the subduction processes, due to its high buoyancy.In Ecuador and Colombia, the latest Jurassic–Early Cretaceous suture involves HP oceanic plateau rocks and N-MORB rocks metamorphosed under lower grades, suggesting a composite or polyphase nature for the latest Jurassic–Early Cretaceous accretionary event.     

A Large-Scale Palaeozoic Dextral Ductile Strike-Slip Zone:the Aqqikkudug-Weiya Zone along the Northern Margin of the Central Tianshan Belt,Xinjiang,NW China

The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by "flower" strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269(5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins.     

SHRIMP dating of the Permo-Carboniferous Jinshajiang ophiolite, southwestern China: Geochronological constraints for the evolution of Paleo-Tethys

SHRIMP U–Pb zircon dating of gabbro, anorthosite, trondhjemite and granodiorite from the Jinshajiang ophiolitic mélange of southwestern China provides geochronological constraints on the evolution of Paleo-Tethys. The ophiolitic mélange is exposed for about 130 km along the Jinshajiang River where numerous blocks of serpentinite, ultramafic cumulate, gabbro, sheeted dikes, pillow lavas and radiolarian chert are set in a greenschist matrix. A cumulate gabbro-anorthosite association and an amphibole gabbro have ages of 338 ± 6 Ma, 329 ± 7 Ma and 320 ± 10 Ma, respectively, which constrain the time of formation of oceanic crust. An ophiolitic isotropic gabbro dated at 282–285 Ma has the same age as a trondhjemite vein (285 ± 6 Ma) cutting the gabbro. These ages probably reflect a late phase of sea-floor spreading above an intra-oceanic subduction zone. At the southern end of the Jinshajiang belt, a granitoid batholith (268 ± 6 Ma), a gabbro massif (264 ± 4 Ma), and a granodiorite (adakite) intrusion (263 ± 6 Ma) in the ophiolitic mélange constitute a Permian intra-oceanic plutonic arc complex. A trondhjemite dike intruded serpentinite in the mélange at 238 ± 10 Ma and postdates the arc evolution of the Jinshajiang segment of Paleo-Tethys.     

Nature and origin of the BIF-hosted São Bento gold deposit, Quadrilátero Ferrífero, Brazil, with special emphasis on structural controls

The orogenic banded iron formation (BIF)-hosted Au mineralization at São Bento is a structurally-controlled, hydrothermal deposit hosted by Archean rocks of the Rio das Velhas greenstone belt, Quadrilátero Ferrífero region, Brazil. The deposit has reserves of 14.3 t Au and historical (underground) production of 44.6 t Au between 1987 and 2001. The oxide-facies São Bento BIF is mineralized at its lower portion, where in contact with carbonaceous, pelitic schists, particularly in the proximity of sulfide-bearing quartz veins. Shear-related Au deposition is associated with the pervasive, hydrothermal sulfidation (mainly arsenopyrite) of the Fe-rich bands of the São Bento BIF. Auriferous, sulfide- and quartz-rich zones represent proximal alteration zones. They are enveloped by ankerite-dominated haloes, which reflect progressive substitution of siderite and magnetite within the BIF by ankerite and pyrrhotite, respectively. The São Bento BIF was intensely and extensively deformed, first into open, upright folds that evolved into tight, asymmetric, isoclinal folds. The inverse limb of these folds attenuated and gave way to sheath folds and the establishment of ductile thrusts. Mineralized horizons at São Bento result from early structural modifications imposed by major transcurrent and thrusts faults, comprising the Conceição, Barão de Cocais and São Bento shear zones. Dextral movement on the SW–NE-directed Conceição shear zone may have generated splays at a compressional side-stepping zone, such as the São Bento shear zone, which is the structural locus for the São Bento gold mineralization. Relaxation of the Conceição shear zone under more brittle conditions resulted in the development of dilatational zones where gold–sulfide–quartz veins formed. These structures are considered to have been generated in the Archean. Geochronological data are scarce, with Pb–Pb analyses of refractory arsenopyrite and pyrite from bedded and remobilized ore plotting on a single-stage growth curve at 2.65 Ga. A later compressional, ductile deformation of unknown age overprinted, rotated and flattened the original, N60E-directed structure of the whole rock succession, with development of planar and linear fabrics that appear similar to Proterozoic-aged structures. Fluid inclusion studies indicate low salinity, aqueous fluids, with or without CO₂ and/or CH₄, with extremely variable CO₂/CH₄ ratios, of probable metamorphic origin. Fluid evolution shows a paragenetic decrease in the carbonic phase from 10–15% to 5%, and increase in the H₂O/(CO₂ + CH₄) and CO₂/CH₄ ratios, suggesting important interaction with carbonaceous sediment. Trapping conditions indicate a temperature of 300 °C at 3.2 kbar.     

阿尔泰额尔齐斯构造带岩石应变特征及其构造意义

阿尔泰额尔齐斯构造带东段岩石变形强烈,最大应变椭球轴比(Rxz)可达10～30,剪应变(γ)达4～6。该带可分为2个层次4个次级构造带。第一层次为韧性—韧脆性中—中-浅层次变形带,包括萨尔布拉克—科克萨依脆性挤压劈理化带、达拉维孜—阿热勒托别剪切流变构造带和库尔提—玛因鄂博韧性剪压变形带,第二层次是齐伯度—富蕴深层次超韧性变晶糜棱岩带。第一层次变形带中沿达拉维孜—阿热勒托别一线为最强变形带,向两侧依次减弱。中心带以剪切—拉伸变形为主,两侧以压扁变形为主兼有剪切,均为左行剪切。结合区域地质分析,可认为这3个变形带共同组成一个完整的板块(微陆块)聚合变形带,显示喀拉通克岛弧以北东偏东方向俯冲于可可托海—青河陆缘岩浆弧之下,并发生弧—陆碰撞。齐伯度—富蕴变晶糜棱岩带岩石变形温度压力条件高,以右行剪切为特点,具有完全不同的地质演化历史,反映它可能是在古生代期间被强烈改造的具有前震旦纪结晶基底的微大陆的残块(或断片)。     

Timing and role of the Maranhão River Thrust in the evolution of the Neoproterozoic Brasília Belt and Tocantins Province, central Brazil

A low-angle thrust fault places high-PT granulites (hangingwall) of the Internal Zone of the Neoproterozoic Brasília Belt (Tocantins Province, central Brazil) in contact with a lower-grade footwall (External Zone) comprised of nappes of distal passive margin- and back-arc basin-related supracrustals. The footwall units were emplaced at  750 Ma onto proximal sedimentary rocks (Paranoá Group) of the São Francisco paleo-continent passive margin. The high-PT belt is comprised of 645–630 Ma granulite-facies paragneiss and orthogneiss, and mafic–ultramafic complexes that include three major layered intrusions and metavolcanic rocks granulitized at  750 Ma. These complexes occur within lower-grade metasedimentary rocks in the hangingwall of the Maranhão River Thrust, which forms the Internal Zone–External Zone boundary fault to the north of the Pirineus Zone of High Strain. Detailed lithostructural studies carried out in Maranhão River Thrust hangingwall and footwall metasedimentary rocks between the Niquelândia and Barro Alto complexes, and also to the east of these, indicate the same lithotypes and Sm–Nd isotopic signatures, and the same D₁–D₂ progressive deformation and greenschist-facies metamorphism. Additionally, footwall metasedimentary rocks exclusively display a post-D₂ deformation indicating that the Maranhão River Thrust propagated through upper crustal rocks of the Paranoá Group relatively late during the tectonic evolution of the belt. Fault propagation was a consequence of intraplate underthrusting during granulite exhumation. The results allow for a better tectonic understanding of the Brasília Belt and the Tocantins Province, as well as explaining the presence of the Pirineus Zone of High Strain.     

Maturation thermique des roches mères dans les bassins des basses-terres du Saint-Laurent et dans quelques buttes témoins au sud-est du Bouclier canadien

Caradocian source rocks belonging to the Utica Group occur around and overlay the southeastern part of the Canadian Shield from the Ottawa embayment, in the southwestern part of St. Lawrence Lowlands, to the Anticosti Island basin. The kerogen of the source rocks is mainly made up of amorphous organic matter (transmitted light), resembling a solid bitumen framework in reflected light, and contains a small portion of zooclasts (graptolites and chitinozoans). The kerogen is often too mature to have preserved the structure of the original constituents, except those of graptolites and chitinozoans. Otherwise, UV fluorescent colonial alga and tasmanites are observed.In the eastern half of the St. Lawrence Lowlands, stratigraphic and tectonic burial is the main control of source rock thermal maturation. From an area located 50 km west of Quebec City, the estimated vitrinite reflectance (R_o-Std) of the source rock increases in both northeastern (Montmorency Falls) and southwestern (St. Maurice River) directions, from R_o-Std of 1.2 to 1.5 and 1.7%, respectively. The source rocks of the Ottawa embayment and Montreal area (western half of the basin) are overmature due to hydrothermal and igneous activities (2.3%<R_o-Std<2.8%).. In Chicoutimi and Lac Saint-Jean outliers, the source rocks show reflectances between 0.9 and 1.2%, slightly less than reflectance values in the Quebec City area (R_o-Std between 1.2 and 1.5%). On Anticosti Island, the thermal maturation is related to burial only and increases downdip of the inclined platform, from the northeast toward the southwest (R_o-Std between 0.9 and 2.1%).These observations suggest that the St. Lawrence platform and the southeastern Canadian Shield were buried by at least 3.5 km of Paleozoic strata prior to erosion to Grenville basement. This implies that most potential hydrocarbon fields are presumably also lost by erosion.

Résumé

Des roches mères caradociennes, appartenant au Groupe d'Utica, sont trouvées autour et sur la partie sud-est du Bouclier canadien, du sous-bassin de la région d'Ottawa, dans la partie sud-ouest des basses-terres du Saint-Laurent jusqu'au bassin de l'île d'Anticosti. Le kérogène de ces roches mères est principalement constitué de matière organique amorphe (lumière transmise) ayant l'aspect d'un treillis fait de bitume solide lorsqu'il est observé en lumière incidente et contient une petite proportion de zooclastes (graptolites et chitinozoaires). Ce kérogène est souvent trop mature pour avoir préservé la structure originale de ses constituants, sauf celle des graptolites et des chitinozoaires. Dans le cas contraire, on observe des colonies algaires et des tasmanites fluorescentes à la lumière ultraviolette.Dans la moitié est des basses-terres du Saint-Laurent, l'enfouissement stratigraphique et tectonique contrôle la maturation thermique de la roche mère. D'un point situé à 50 km à l'ouest de Québec, la réflectance standardisée à celle de la vitrinite (R_h-Std) de la roche mère augmente tant vers le nord-est (Chutes Montmorency) que vers le sud-ouest (rivière Saint-Maurice), et varie entre 1,2 et 1,5 ou 1,7% respectivement. D'autre part, les roches mères des régions d'Ottawa et de Montréal (ouest du bassin) sont supramatures à cause d'activités hydrothermales et ignées (2,3%<R_h-Std<2,8%). Dans les buttes témoins du Saguenay et du Lac-Saint-Jean, les roches mères montrent des valeurs de la R_h-Std comprises entre 0,9 et 1,2%, légèrement inférieures à celles de la région de Québec (R_h-Std entre 1,2 et 1,5%). Dans l'île d'Anticosti, la maturation thermique est surtout reliée à l'enfouissement et s'accroît en direction de l'approfondissement de la plate-forme, du nord-est vers le sud-ouest (R_h-Std entre 0,9 et 2,1%).Ces observations suggèrent que la plate-forme du Saint-Laurent et le sud-est du Bouclier canadien furent enfouis sous au moins 3,5 km de strates paléozoïques avant que ces dernières soient érodées au niveau du socle grenvillien. Ceci implique que la majorité des gisements potentiels d'hydrocarbures furent probablement aussi perdus par érosion.     

Stratal disruption and development of mélange, Western Newfoundland: effect of high fluid pressure in an accretionary terrain during ophiolite emplacement

The Bay of Islands Ophiolite was emplaced onto the continental margin of North America during the mid-Ordovician Taconic orogeny, when tectonic slices of continental margin sediments were accreted to the moving allochthon. Tectonic slices grade into and are surrounded by mélange. Early fracture in sandstones formed without grain breakage and allowed penetration of liquid petroleum along fracture planes. Other fractures involved cataclastic flow and were sometimes re-activated during formation of later pressure solution cleavage. Shear-fracture and extension-fracture boudinage affect competent strata; extensional veins cut cement in limestone beds and are filled by shale, quartz, calcite and bitumen. Folds also formed, at a time when siltstone and sandstone were at least partially lithified. Mélange matrix shows abundant shear and extension fractures in a variety of orientations.Coaxial extension responsible for disruption of bedding can be explained by a brittle accretionary wedge model in which high fluid pressures resulted from tectonic dewatering of shales. Surface slope decreased as fluid pressure rose beneath the ophiolite, causing horizontal extension of the wedge. After escape of excess water the surface slope steepened again as renewed stacking occurred.     

Collision leading to multiple-stage large-scale extrusion in the Qinling orogen: Insights from the Mianlue suture

The geologic framework of the Phanerozoic Qinling–Dabie orogen was built up through two major suturing events of three blocks. From north to south these include the North China craton (including the north Qinling block), the Qinling–Dabie microblock, and the South China craton (including the Bikou block), separated by the Shangdan and Mianlue sutures. The Mianlue suture zone contains evidence for Mesozoic extrusion tectonics in the form of major strike–slip border faults surrounding basement blocks, a Late Paleozoic ophiolite and a ca. 240–200 Ma thrust belt that reformed by 200–150 Ma thrusts during A-type (intracontinental) subduction. The regional map pattern shows that the blocks are surrounded by complexly deformed Devonian to Early Triassic metasandstones and metapelites, forming a regional-scale block-in-matrix mélange fabric. Five distinct tectonic units have been recognized in the belt: (1) basement blocks including two types of Precambrian basement, crystalline and transitional; (2) continental margin slices including Early Paleozoic strata, and Late Paleozoic fluviodeltaic sedimentary rocks, proximal and distal fan clastics, reflecting the development of a north-facing rift margin on the edge of the South China plate; (3) out of sequence oceanic crustal slices including strongly deformed postrift, deep-water sedimentary rocks, sheeted dikes, basalts, and mafic–ultramafic cumulates of a Late Paleozoic ophiolite suite, developing independent of the rift margin in a separate basin; (4) out-of-sequence island-arc slices; (5) accretionary wedge slices. All the tectonic units were deformed during three geometrically distinct deformation episodes (D₁, D₂ and D₃ during 240–200 Ma). Units 2–4 involved southward thrusting and vertical then southward extrusion of about 20 km of horizontal displacement above the autochthonous basement during the D₁ episode. Thrust slices 20 km south of the Mianlue suture are related to this vertical extrusion due to the same rock assemblages, ages and kinematics. The D₂ and D₃ episodes folded all the units in a thick-skinned style about east–west (D₂) and west–northwest (D₃) axes in the Mianlue suture zone. An early foreland propagating sequence of accretion of Late Paleozoic rocks deposited above the Yangtze craton is not involved in D₁ deformation but is temporally equivalent to the D₂ and D₃ deformation in the Mianlue suture. Two stages of strike–slip faulting mainly occurred at the end of D₂ and D₃, respectively. During D₂ deformation, the Bikou block was obliquely indented to the ESE into the Mianlue suture, rather than being thrust over the Mianlue suture from the north as a part of the Qinling–Dabie microblock. During D₃ deformation, however, the Bikou block was bounded by the south boundary fault of the Mianlue suture, and the Yangpingguan fault on the south. These faults are coeval strike–slip faults, but of opposite senses, and accommodated minor southwestward extrusion of the Bikou block into Songpan–Ganze orogen. The other basement blocks north of the Mianlue suture were extruded eastward by about 20 km of lateral displacement, based on the offset of the Wudang dome, during the D₃ episode due to the northeastward indentation of the Hannan complex of the South China craton. Post-D₃ emplacement of granite, cutting across the strike–slip faults such as the Mianlue suture, provides a minimum age of 200 Ma for D₃ deformation. Therefore, based on insights from the evolution of the Mianlue suture, the D₂ and D₃ episodes in the Mianlue suture and its neighbors are not responsible for and associated with the two-stage extrusion of the Dabie UHP-HP terranes from the Foping dome to the present erosional surface (more than 350 km).     

Cenozoic post-collisional brittle tectonic history and stress reorientation in the High Zagros Belt (Iran, Fars Province)

The Zagros fold-and-thrust belt of SW-Iran is among the youngest continental collision zones on Earth. Collision is thought to have occurred in the late Oligocene–early Miocene, followed by continental shortening. The High Zagros Belt (HZB) presents a Neogene imbricate structure that has affected the thick sedimentary cover of the former Arabian continental passive margin. The HZB of interior Fars marks the innermost part of SE-Zagros, trending NW–SE, that is characterised by higher elevation, lack of seismicity, and no evident active crustal shortening with respect to the outer (SW) parts. This study examines the brittle structures that developed during the mountain building process to decipher the history of polyphase deformation and variations in compressive tectonic fields since the onset of collision. Analytic inversion techniques enabled us to determine and separate different brittle tectonic regimes in terms of stress tensors. Various strike–slip, compressional, and tensional stress regimes are thus identified with different stress fields. Brittle tectonic analyses were carried out to reconstruct possible geometrical relationships between different structures and to establish relative chronologies of corresponding stress fields, considering the folding process. Results indicate that in the studied area, the main fold and thrust structure developed in a general compressional stress regime with an average N032° direction of σ₁ stress axis during the Miocene. Strike–slip structures were generated under three successive strike–slip stress regimes with different σ₁ directions in the early Miocene (N053°), late Miocene–early Pliocene (N026°), and post-Pliocene (N002°), evolving from pre-fold to post-fold faulting. Tensional structures also developed as a function of the evolving stress regimes. Our reconstruction of stress fields suggests an anticlockwise reorientation of the horizontal σ₁ axis since the onset of collision and a significant change in vertical stress from σ₃ to σ₂ since the late stage of folding and thrusting. A late right-lateral reactivation was also observed on some pre-existing belt-parallel brittle structures, especially along the reverse fault systems, consistent with the recent N–S plate convergence. However, this feature was not reflected by large structures in the HZB of interior Fars. The results should not be extrapolated to the entire Zagros belt, where the deformation front has propagated from inner to outer zones during the younger events.     

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.