The Na <Emphasis Type="SmallCaps">i</Emphasis> and Sr <Emphasis Type="SmallCaps">ii</Emphasis> Resonance Lines in Solar Prominences

We estimate the electron density, \(n_{\mathrm{e}}\), and its spatial variation in quiescent prominences from the observed emission ratio of the resonance lines Na?i?5890 Å (D₂) and Sr?ii?4078 Å. For a bright prominence (\(\tau_{\alpha}\approx25\)) we obtain a mean \(n_{\mathrm{e}}\approx2\times10^{10}~\mbox{cm}^{-3}\); for a faint one (\(\tau _{\alpha }\approx4\)) \(n_{\mathrm{e}}\approx4\times10^{10}~\mbox{cm}^{-3}\) on two consecutive days with moderate internal fluctuation and no systematic variation with height above the solar limb. The thermal and non-thermal contributions to the line broadening, \(T_{\mathrm{kin}}\) and \(V_{\mathrm{nth}}\), required to deduce \(n_{\mathrm{e}}\) from the emission ratio Na?i/Sr?ii cannot be unambiguously determined from observed widths of lines from atoms of different mass. The reduced widths, \(\Delta\lambda_{\mathrm{D}}/\lambda_{0}\), of Sr?ii?4078 Å show an excess over those from Na?D₂ and \(\mbox{H}\delta\,4101\) Å, assuming the same \(T_{\mathrm{kin}}\) and \(V_{\mathrm{nth}}\). We attribute this excess broadening to higher non-thermal broadening induced by interaction of ions with the prominence magnetic field. This is suggested by the finding of higher macro-shifts of Sr?ii?4078 Å as compared to those from Na?D₂.     

Ratio of the Core to the Extended Emissions in the Comoving Frame for Blazars

In a two-component jet model, the emissions are the sum of the core and extended emissions: \(S^{\mathrm{ob}}=S_{\mathrm{core}}^{\mathrm{ob}}+S_{\mathrm{ext}}^{\mathrm{ob}}\), with the core emissions, \(S_{\mathrm{core}}^{\mathrm{ob}}= f S_{\mathrm{ext}}^{\mathrm{ob}}\delta ^{q}\) being a function of the Doppler factor \(\delta \), the extended emission \(S_{\mathrm{ext}}^{\mathrm{ob}}\), the jet type dependent factor q, and the ratio of the core to the extended emissions in the comoving frame, f. The f is an unobservable but important parameter. Following our previous work, we collect 65 blazars with available Doppler factor \(\delta \), superluminal velocity \(\beta _{\mathrm{app}}\), and core-dominance parameter, R, and calculated the ratio, f, and performed statistical analyses. We found that the ratio, f, in BL Lacs is on average larger than that in FSRQs. We suggest that the difference of the ratio f between FSRQs and BL Lacs is one of the possible reasons that cause the difference of other observed properties between them. We also find some significant correlations between \(\log f\) and other parameters, including intrinsic (de-beamed) peak frequency, \(\log \nu _{\mathrm{p}}^{\mathrm{in}}\), intrinsic polarization, \(\log P^{\mathrm{in}}\), and core-dominance parameter, \(\log R\), for the whole sample. In addition, we show that the ratio, f, can be estimated by R.     

Improved Determination of the Location of the Temperature Maximum in the Corona

The most used method to calculate the coronal electron temperature [\(T_{\mathrm{e}} (r)\)] from a coronal density distribution [\(n_{\mathrm{e}} (r)\)] is the scale-height method (SHM). We introduce a novel method that is a generalization of a method introduced by Alfvén (Ark. Mat. Astron. Fys. 27, 1, 1941) to calculate \(T_{\mathrm{e}}(r)\) for a corona in hydrostatic equilibrium: the “HST” method. All of the methods discussed here require given electron-density distributions [\(n_{\mathrm{e}} (r)\)] which can be derived from white-light (WL) eclipse observations. The new “DYN” method determines the unique solution of \(T_{\mathrm{e}}(r)\) for which \(T_{\mathrm{e}}(r \rightarrow \infty) \rightarrow 0\) when the solar corona expands radially as realized in hydrodynamical solar-wind models. The applications of the SHM method and DYN method give comparable distributions for \(T_{\mathrm{e}}(r)\). Both have a maximum [\(T_{\max}\)] whose value ranges between 1?–?3 MK. However, the peak of temperature is located at a different altitude in both cases. Close to the Sun where the expansion velocity is subsonic (\(r < 1.3\,\mathrm{R}_{\odot}\)) the DYN method gives the same results as the HST method. The effects of the other free parameters on the DYN temperature distribution are presented in the last part of this study. Our DYN method is a new tool to evaluate the range of altitudes where the heating rate is maximum in the solar corona when the electron-density distribution is obtained from WL coronal observations.     

Dark energy cosmological models with cosmic string

In this paper we have studied the anisotropic Kantowski-Sachs, locally rotationally symmetric (LRS) Bianchi type-I and LRS Bianchi type-III geometries filled with dark energy and one dimensional cosmic string in the Saez-Ballester theory of gravitation. To get physically valid solution we take hybrid expansion law of the average scale factor which is a product of power and exponential type of functions that results in time dependent deceleration parameter (\(q\)). The equation of state parameter of dark energy (\(\omega _{\mathit{de}}\)) has been discussed and we have observed that for the three models it crosses the phantom divide line (\(\omega _{\mathit{de}} = -1\)) and shows quintom like behavior. The density of dark energy (\(\rho _{\mathit{de}}\)) is an increasing function of redshift and remains positive throughout the evolution of the universe for the three models. Moreover in Kantowski-Sachs and LRS Bianchi type-I geometries the dark energy density dominates the string tension density (\(\lambda \)) and proper density (\(\rho \)) throughout the evolution of the universe. The physical and geometrical aspects of the statefinder parameters (\(r,s\)), squared speed of sound (\(v_{s}^{2} \)) and \(\omega _{\mathit{de}}\)–\(\omega ^{\prime }_{\mathit{de}}\) plane are also discussed.     

Prediction of the Length of Upcoming Solar Cycles

The forecast of solar cycle (SC) characteristics is crucial particularly for several space-based missions. In the present study, we propose a new model for predicting the length of the SC. The model uses the information of the width of an autocorrelation function that is derived from the daily sunspot data for each SC. We tested the model on Versions 1 and 2 of the daily international sunspot number data for SCs 10?–?24. We found that the autocorrelation width \(A_{\mathrm{w}} ^{n}\) of SC \(n\) during the second half of its ascending phase correlates well with the modified length that is defined as \(T_{\mathrm{cy}}^{n+2} - T_{\mathrm{a}}^{n}\). Here \(T_{\mathrm{cy}}^{n+2}\) and \(T_{ \mathrm{a}}^{n}\) are the length and ascent time of SCs \(n+2\) and \(n\), respectively. The estimated correlation coefficient between the model parameters is 0.93 (0.91) for Version 1 (Version 2) sunspot series. The standard errors in the observed and predicted lengths of the SCs for Version 1 and Version 2 data are 0.38 and 0.44 years, respectively. The advantage of the proposed model is that the predictions of the length of the upcoming two SCs (i.e., \(n+1\), \(n+2\)) are readily available at the time of the peak of SC \(n\). The present model gives a forecast of 11.01, 10.52, and 11.91 years (11.01, 12.20, and 11.68 years) for the length of SCs 24, 25, and 26, respectively, for Version 1 (Version 2).     

Estimation of Reconnection Flux Using Post-eruption Arcades and Its Relevance to Magnetic Clouds at 1 AU

We report on a new method to compute the flare reconnection (RC) flux from post-eruption arcades (PEAs) and the underlying photospheric magnetic fields. In previous works, the RC flux has been computed using the cumulative flare ribbon area. Here we obtain the RC flux as the flux in half of the area underlying the PEA in EUV imaged after the flare maximum. We apply this method to a set of 21 eruptions that originated near the solar disk center in Solar Cycle 23. We find that the RC flux from the arcade method (\(\Phi_{\mathrm{rA}}\)) has excellent agreement with the flux from the flare-ribbon method (\(\Phi_{\mathrm{rR}}\)) according to \(\Phi_{\mathrm{rA}} = 1.24(\Phi_{\mathrm{rR}})^{0.99}\). We also find \(\Phi_{\mathrm{rA}}\) to be correlated with the poloidal flux (\(\Phi_{\mathrm{P}}\)) of the associated magnetic cloud at 1 AU: \(\Phi_{\mathrm{P}} = 1.20(\Phi_{\mathrm{rA}})^{0.85}\). This relation is nearly identical to that obtained by Qiu et al. (Astrophys. J. 659, 758, 2007) using a set of only 9 eruptions. Our result supports the idea that flare reconnection results in the formation of the flux rope and PEA as a common process.     

Evaluating (and Improving) Estimates of the Solar Radial Magnetic Field Component from Line-of-Sight Magnetograms

Although for many solar physics problems the desirable or meaningful boundary is the radial component of the magnetic field \(B_{\mathrm {r}}\), the most readily available measurement is the component of the magnetic field along the line of sight to the observer, \(B_{\mathrm {los}}\). As this component is only equal to the radial component where the viewing angle is exactly zero, some approximation is required to estimate \(B_{\mathrm {r}}\) at all other observed locations. In this study, a common approximation known as the “\(\mu\)-correction”, which assumes all photospheric field to be radial, is compared to a method that invokes computing a potential field that matches the observed \(B_{\mathrm {los}}\), from which the potential field radial component, \(B_{\mathrm {r}}^{\mathrm {pot}}\) is recovered. We demonstrate that in regions that are truly dominated by a radially oriented field at the resolution of the data employed, the \(\mu\)-correction performs acceptably if not better than the potential-field approach. However, it is also shown that for any solar structure that includes horizontal fields, i.e. active regions, the potential-field method better recovers both the strength of the radial field and the location of magnetic neutral line.     

Kelvin–Helmholtz Instability in a Cool Solar Jet in the Framework of Hall Magnetohydrodynamics: A Case Study

We investigate the conditions under which the magnetohydrodynamic (MHD) modes in a cylindrical magnetic flux tube moving along its axis become unstable against the Kelvin–Helmholtz (KH) instability. We use the dispersion relations of MHD modes obtained from the linearized Hall MHD equations for cool (zero beta) plasma by assuming real wave numbers and complex angular wave frequencies/complex wave phase velocities. The dispersion equations are solved numerically at fixed input parameters and varying values of the ratio \(l_{\mathrm{Hall}}/a\), where \(l_{\mathrm{Hall}} = c/\omega_{\mathrm{pi}}\) (\(c\) being the speed of light, and \(\omega_{\mathrm{pi}}\) the ion plasma frequency) and \(a\) is the flux tube radius. It is shown that the stability of the MHD modes depends upon four parameters: the density contrast between the flux tube and its environment, the ratio of external and internal magnetic fields, the ratio \(l_{\mathrm{Hall}}/a\), and the value of the Alfvén Mach number defined as the ratio of the tube axial velocity to Alfvén speed inside the flux tube. It is found that at high density contrasts, for small values of \(l_{\mathrm{Hall}}/a\), the kink (\(m = 1\)) mode can become unstable against KH instability at some critical Alfvén Mach number (or equivalently at critical flow speed), but a threshold \(l_{\mathrm{Hall}}/a\) can suppress the onset of the KH instability. At small density contrasts, however, the magnitude of \(l_{\mathrm{Hall}}/a\) does not affect noticeably the condition for instability occurrence – even though it can reduce the critical Alfvén Mach number. It is established that the sausage mode (\(m = 0\)) is not subject to the KH instability.     

Relating Solar Energetic Particle Event Fluences to Peak Intensities

Recently we (Kahler and Ling, Solar Phys.292, 59, 2017: KL) have shown that time–intensity profiles [\(I(t)\)] of 14 large solar energetic particle (SEP) events can be fitted with a simple two-parameter fit, the modified Weibull function, which is characterized by shape and scaling parameters [\(\alpha\) and \(\beta\)]. We now look for a simple correlation between an event peak energy intensity [\(I_{\mathrm{p}}\)] and the time integral of \(I(t)\) over the event duration: the fluence [\(F\)]. We first ask how the ratio of \(F/I_{\mathrm{p}}\) varies for the fits of the 14 KL events and then examine that ratio for three separate published statistical studies of SEP events in which both \(F\) and \(I_{\mathrm{p}}\) were measured for comparisons of those parameters with various solar-flare and coronal mass ejection (CME) parameters. The three studies included SEP energies from a 4?–?13 MeV band to \(E > 100~\mbox{MeV}\). Within each group of SEP events, we find a very robust correlation (\(\mathrm{CC} > 0.90\)) in log–log plots of \(F\)versus\(I_{\mathrm{p}}\) over four decades of \(I_{\mathrm{p}}\). The ratio increases from western to eastern longitudes. From the value of \(I_{\mathrm{p}}\) for a given event, \(F\) can be estimated to within a standard deviation of a factor of \({\leq}\,2\). Log–log plots of two studies are consistent with slopes of unity, but the third study shows plot slopes of \({<}\,1\) and decreasing with increasing energy for their four energy ranges from \(E > 10~\mbox{MeV}\) to \({>}\,100~\mbox{MeV}\). This difference is not explained.     

Nature of Coherent Radio Emission from Pulsars

The pulsar radio emission originates from regions below 10% of the light cylinder radius. This requires a mechanism where coherent emission is excited in relativistic pair plasma with frequency \(\nu _{\mathrm{cr}}\) which is below the plasma frequency \(\nu _{\circ }\) i.e. \(\nu _{\mathrm{cr}} < \nu _{\circ }\). A possible model for the emission mechanism is charged bunches (charged solitons) moving relativistically along the curved open dipolar magnetic field lines capable of exciting coherent curvature radio emission. In this article, we review the results from high quality observations in conjunction with theoretical models to unravel the nature of coherent curvature radio emission in pulsars.     

Modulations of the surface magnetic field on the intra-cycle variability of total solar irradiance

Solar photospheric magnetic field plays a dominant role in the variability of total solar irradiance (TSI). The modulation of magnetic flux at six specific ranges on TSI is characterized for the first time. The daily flux values of magnetic field at four ranges are extracted from MDI/SOHO, together with daily flux of active regions (MF\(_{\text{ar}}\)) and quiet regions (MF\(_{\text{qr}}\)); the first four ranges (MF\(_{1\mbox{--}4}\)) are: 1.5–2.9, 2.9–32.0, 32.0–42.7, and 42.7–380.1 (\(\times 10^{18}\) Mx per element), respectively. Cross-correlograms show that MF₄, MF\(_{\text{qr}}\), and MF\(_{ \text{ar}}\) are positively correlated with TSI, while MF₂ is negatively correlated with TSI; the correlations between MF₁, MF₃ and TSI are insignificant. The bootstrapping tests confirm that the impact of MF₄ on TSI is more significant than that of MF\(_{\text{ar}}\) and MF\(_{\text{qr}}\), and MF\(_{\text{ar}}\) leads TSI by one rotational period. By extracting the rotational variations in the MFs and TSI, the modulations of the former on the latter at the solar rotational timescale are clearly illustrated and compared during solar maximum and minimum times, respectively. Comparison of the relative amplitudes of the long-term variation show that TSI is in good agreement with the variation of MF₄ and MF\(_{\text{ar}}\); besides, MF₂ is in antiphase with TSI, and it lags the latter by about 1.5 years.     

A Check on the Validity of Magnetic Field Reconstructions

We investigate a method to test whether a numerically computed model coronal magnetic field \({\boldsymbol {B}}\) departs from the divergence-free condition (also known as the solenoidality condition). The test requires a potential field \({\boldsymbol {B}}_{0}\) to be calculated, subject to Neumann boundary conditions, given by the normal components of the model field \({\boldsymbol {B}}\) at the boundaries. The free energy of the model field may be calculated using \(\frac{1}{2\mu _{0}}\int ({\boldsymbol {B}}-{\boldsymbol {B}}_{0})^{2}\mathrm{d}V\), where the integral is over the computational volume of the model field. A second estimate of the free energy is provided by calculating \(\frac{1}{2\mu _{0}}\int {\boldsymbol {B}}^{2}\,\mathrm{d}V-\frac{1}{2\mu _{0}}\int {\boldsymbol {B}}_{0}^{2}\,\mathrm{d}V\). If \({\boldsymbol {B}}\) is divergence free, the two estimates of the free energy should be the same. A difference between the two estimates indicates a departure from \(\nabla \cdot {\boldsymbol {B}}=0\) in the volume. The test is an implementation of a procedure proposed by Moraitis et al. (Solar Phys.289, 4453, 2014) and is a simpler version of the Helmholtz decomposition procedure presented by Valori et al. (Astron. Astrophys.553, A38, 2013). We demonstrate the test in application to previously published nonlinear force-free model fields, and also investigate the influence on the results of the test of a departure from flux balance over the boundaries of the model field. Our results underline the fact that, to make meaningful statements about magnetic free energy in the corona, it is necessary to have model magnetic fields that satisfy the divergence-free condition to a good approximation.     

Contribution to the Solar Mean Magnetic Field from Different Solar Regions

Seven-year-long seeing-free observations of solar magnetic fields with the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) were used to study the sources of the solar mean magnetic field, SMMF, defined as the net line-of-sight magnetic flux divided over the solar disk area. To evaluate the contribution of different regions to the SMMF, we separated all the pixels of each SDO/HMI magnetogram into three subsets: weak (\(B^{\mathrm{W}}\)), intermediate (\(B^{\mathrm{I}}\)), and strong (\(B^{\mathrm{S}}\)) fields. The \(B^{\mathrm{W}}\) component represents areas with magnetic flux densities below the chosen threshold; the \(B^{\mathrm{I}}\) component is mainly represented by network fields, remains of decayed active regions (ARs), and ephemeral regions. The \(B^{\mathrm{S}}\) component consists of magnetic elements in ARs. To derive the contribution of a subset to the total SMMF, the linear regression coefficients between the corresponding component and the SMMF were calculated. We found that i) when the threshold level of 30 Mx?cm^?2 is applied, the \(B^{\mathrm{I}}\) and \(B^{\mathrm{S}}\) components together contribute from 65% to 95% of the SMMF, while the fraction of the occupied area varies in a range of 2?–?6% of the disk area; ii) as the threshold magnitude is lowered to 6 Mx?cm^?2, the contribution from \(B^{\mathrm{I}}+B^{\mathrm{S}}\) grows to 98%, and the fraction of the occupied area reaches a value of about 40% of the solar disk. In summary, we found that regardless of the threshold level, only a small part of the solar disk area contributes to the SMMF. This means that the photospheric magnetic structure is an intermittent inherently porous medium, resembling a percolation cluster. These findings suggest that the long-standing concept that continuous vast unipolar areas on the solar surface are the source of the SMMF may need to be reconsidered.     

Statistical approach to triple systems in three-dimensional motion

This paper considers disruption of triple close approaches with low initial velocities and equal masses in the framework of statistical escape theory in a three-dimensional space. The statistical escape theory is based on the assumption that the phase trajectory of a triple system is quasi-ergodic. This system is described by allowing for both energy and angular momentum conservation in the phase space. In this paper, “possibility of escape” is derived with the formation of a binary on the basis of relative distances of the participating bodies. The complete statistical solutions (i.e. the semi-major axis \(a\), the distributions of eccentricity \(e\) of the binary, binary energy \({E}_{{b}}\), escape energy \({E}_{{s}}\) of escaper, and its escape velocity \({v}_{{s}}\)) of the system are derived from the allowable phase space volumes and are in good agreement with the numerical results in the range of perturbing velocities \({v}_{{i}}\)(\(10^{ - 1} \le {v}_{{i}} \le 10^{ - 10}\)) and directions of \({v}_{{i}}(0 \le \alpha _{{i}},\beta _{{i}},\gamma _{{i}} \le \pi )\), \({i} = 1,2,3\). In this paper, the double limit process has been applied to approximate the escape probability. Through this process, it is observed that the perturbing velocity \({v}_{{i}} \to 0^{ +} \), as the product of the semi-major axis \(a\) of the final binary and the square of the escape velocity \({v}_{{s}}\) approach 2/3, i.e. \({a} {v}_{{s}}^{2} \to 2 / 3\), whatever direction of \(\mathbf{v}_{{i}}\) may be.     

Dust color temperature distribution of two FIR cavities at IRIS and AKARI maps

By systematically searching the region of far infrared loops, we found a number of huge cavity-like dust structures at \(60\,\mu \hbox {m}\) and \(100\,\mu \hbox {m}\) IRIS maps. By checking these with AKARI maps (\(90\,\mu \hbox {m}\) and \(140\,\mu \hbox {m}\)), two new cavity-like structures (sizes \(\sim \) \( 2.7\,\hbox {pc} \times 0.8\,\hbox {pc}\) and \(\sim \) \( 1.8\,\hbox {pc} \times 1\,\hbox {pc}\)) located at R.A. (\(\hbox {J}2000)=14^{h}41^{m}23^{s}\) and Dec. \((\hbox {J}2000)=-64^{\circ }04^{\prime }17^{{\prime }{\prime }}\) and R.A. \((\hbox {J}2000)=05^{h}05^{m}35^{s}\) and Dec. \((\hbox {J}2000)=-\,69^{\circ }35^{\prime } 25^{{\prime }{\prime }}\) were selected for the study. The difference in the average dust color temperatures calculated using IRIS and AKARI maps of the cavity candidates were found to be \(3.2\pm 0.9\,\hbox {K}\) and \(4.1\pm 1.2\,\hbox {K}\), respectively. Interestingly, the longer wavelength AKARI map gives larger values of dust color temperature than that of the shorter wavelength IRIS maps. Possible explanation of the results will be presented.     

<Emphasis Type="Italic">GALEX</Emphasis> far-ultraviolet observations of metal-poor subdwarfs

Far-ultraviolet photometry derived from the GALEX satellite observatory has been compiled for a sample of metal-poor subdwarfs with \(\mathrm{[Fe/H]} < -1.0\). The FUV properties of these subdwarfs are compared with those of a set of Population I dwarfs that are known to have low levels of chromospheric activity. Comparisons are made via a number of photometric plots, including an absolute FUV magnitude versus \((V-K_{s})\) diagram, two-colour diagrams involving both \((m_{ \mathrm{FUV}}-B)\) and \((m_{\mathrm{FUV}}-V)\) versus \(B-V\), and a two-colour diagram composed of \((m_{\mathrm{FUV}}-V)\) versus \((V-K_{s})\). The warmest subdwarfs with \((V-K_{s}) \sim1.2\mbox{--}1.4\) show FUV excesses ranging from \(\sim2\mbox{--}3~\mbox{mag}\) relative to the Population I dwarfs, with the amount of FUV enhancement decreasing among subdwarfs of decreasing effective temperature. The coolest dwarfs that are compared have \((V-K_{s}) \sim1.8\), and among these stars the subdwarfs with \(-2.0 \leq{\mathrm{[Fe/H]}} \leq-1.0\) approach the locus of low activity Population I dwarfs in the \((m_{\mathrm{FUV}}-V, V-K_{s})\) diagram. In the \((m_{\mathrm{FUV}}-B, B-V)\) diagram the subdwarfs in this metallicity range overlap the Population I dwarf sequence for \((B-V) > 0.6\). The behaviour of the subdwarfs is consistent with their FUV fluxes being determined by a combination of a photospheric FUV spectrum, the strength of which diminishes towards cooler effective temperatures, and a spectrum of emission lines arising from a chromosphere and/or transition region which are of comparable strength between the coolest dwarfs and subdwarfs.     

Advective accretion flow properties around rotating black holes – application to GRO J1655-40

We examine the properties of the viscous dissipative accretion flow around rotating black holes in the presence of mass loss. Considering the thin disc approximation, we self-consistently calculate the inflow-outflow solutions and observe that the mass outflow rates decrease with the increase in viscosity parameter (\(\alpha \)). Further, we carry out the model calculation of quasi-periodic oscillation frequency (\(\nu _{\mathrm{QPO}}\)) that is frequently observed in black hole sources and observe that \(\nu ^\mathrm{max}_{\mathrm{QPO}}\) increases with the increase of black hole spin (\(a_k\)). Then, we employ our model in order to explain the High Frequency Quasi-Periodic Oscillations (HFQPOs) observed in black hole source GRO J1655-40. While doing this, we attempt to constrain the range of \(a_k\) based on observed HFQPOs (\(\sim \)300 Hz and \(\sim \)450 Hz) for the black hole source GRO J1655-40.     

A Solar Stationary Type IV Radio Burst and Its Radiation Mechanism

A stationary Type IV (IVs) radio burst was observed on September 24, 2011. Observations from the Nançay RadioHeliograph (NRH) show that the brightness temperature (\(T_{\mathrm{B}}\)) of this burst is extremely high, over \(10^{11}\) K at 150 MHz and over \(10^{8}\) K in general. The degree of circular polarization (\(q\)) is between \(-60\% \sim -100\%\), which means that it is highly left-handed circularly polarized. The flux–frequency spectrum follows a power-law distribution, and the spectral index is considered to be roughly \(-3 \sim -4\) throughout the IVs. Radio sources of this event are located in the wake of the coronal mass ejection and are spatially dispersed. They line up to present a formation in which lower-frequency sources are higher. Based on these observations, it is suggested that the IVs was generated through electron cyclotron maser emission.     

Higher harmonics electrostatic ion cyclotron parallel flow velocity shear instability with inhomogeneous DC electric field in the magnetosphere of Saturn

In present paper higher harmonic electrostatic ion-cyclotron (EIC) parallel flow velocity shear instability in presence of perpendicular inhomogeneous DC electric field with the ambient magnetic field has been studied, in different regions of the magnetosphere of Saturn. Dimensionless growth rate variation of EIC waves has been observed with respect to \(k_{ \bot } \rho _{i}\) for various plasma parameters. Effect of velocity shear scale length (\(A_{i}\)), temperature anisotropy (\(T_{ \bot } /T_{\|}\)), magnetic field (\(B\)), electric field (\(E\)), inhomogeneity (\(P/a\)), angle of propagation (\(\theta \)), ratio of electron to ion temperature (\(T_{e}/T_{i}\)) and density gradient (\(\varepsilon _{n}\rho _{i}\)) on the growth of EIC waves in the inner magnetosphere of Saturn has been studied and analyzed. The mathematical formulation for dispersion relation and growth rate has been done by using the method of characteristic solution and kinetic approach. This theoretical analysis has been done taking the data from the Cassini in the inner magnetosphere of Saturn in the extended region where ion cyclotron waves have been observed. The change in the growth of these waves due to the presence of Enceladus has been analyzed.     

Accretion flow dynamics during 1999 outburst of XTE J1859+226—modeling of broadband spectra and constraining the source mass

We examine the dynamical behavior of accretion flow around XTE J1859+226 during the 1999 outburst by analyzing the entire outburst data (～166 days) from RXTE Satellite. Towards this, we study the hysteresis behavior in the hardness intensity diagram (HID) based on the broadband (3–150 keV) spectral modeling, spectral signature of jet ejection and the evolution of Quasi-periodic Oscillation (QPO) frequencies using the two-component advective flow model around a black hole. We compute the flow parameters, namely Keplerian accretion rate (\({\dot{m}}_{d}\)), sub-Keplerian accretion rate (\({\dot{m}}_{h}\)), shock location (\(r_{s}\)) and black hole mass (\(M_{\mathit{bh}}\)) from the spectral modeling and study their evolution along the q-diagram. Subsequently, the kinetic jet power is computed as \(L^{\mathrm{obs}}_{\mathrm{jet}} \sim3\mbox{--}6 \times10^{37}~\mbox{erg}\,\mbox{s}^{-1}\) during one of the observed radio flares which indicates that jet power corresponds to 8–16% mass outflow rate from the disc. This estimate of mass outflow rate is in close agreement with the change in total accretion rate (～14%) required for spectral modeling before and during the flare. Finally, we provide a mass estimate of the source XTE J1859+226 based on the spectral modeling that lies in the range of 5.2–7.9 \(M_{\odot}\) with 90% confidence.