Practical aspects of calibrating and selecting unit hydrograph-based models for continuous river flow simulation

Abstract

A continuous simulation rainfall-streamflow modelling approach that identifies unit hydrographs for total streamflow has been applied to an 11-year record from a national hydrometric monitoring network catchment in the UK. The model is of the parametrically parsimonious conceptual model (PPCM) type that can make efficient use of rainfall, streamflow and air temperature data readily available from established national and regional monitoring networks. A multiple split-sample model calibration and simulation analysis is presented that reveals some guiding principles for calibrating and applying PPCMs generally. The inadequacy of a one-dimensional objective function for calibrating best PPCMs is demonstrated. A two-dimensional objective function approach is superior but is shown to be unreliable in some cases, confirming the need for additional critical inspection of other model performance statistics, model parameters and time series plots as an integral part of the model calibration process. A strong tendency evident from the multiple split-sample analysis is that, for the catchment studied, models that fit relatively well in calibration mode perform relatively poorly in simulation mode.     

Linking tracers,water age and conceptual models to identify dominant runoff processes in a sparsely monitored humid tropical catchment

Assessing catchment runoff response remains a key research frontier because of limitations in current observational techniques to fully characterize water source areas and transit times in diverse geographical environments. Here, we report a study that combines empirical data with modelling to identify dominant runoff processes in a sparsely monitored humid tropical catchment. The analysis integrated isotope tracers into conceptual rainfall–runoff models of varying complexity (from 5 to 11 calibrated parameters) that are able to simulate discharge and tracer concentrations and track the evolving age of stream water exiting the catchment. The model structures can be seen as competing hypotheses of catchment functioning and were simultaneously calibrated against uncertain streamflow gaugings and a 2‐year daily isotope rainfall–runoff record. Comparison of the models was facilitated using global parameter sensitivity analysis and the resulting effect on calibration. We show that a variety of tested model structures reproduced water and tracer dynamics in stream, but the simpler models failed to adequately reproduce both. The resulting water age distributions of the tested models varied significantly with little similarity between the stream water age and stored water age distributions. The sensitivity analysis revealed that only some of the more complex models (from eight parameters) could be better constrained to infer more plausible water age distributions and catchment storage estimates. These models indicated that the age of water stored in the catchment is generally older compared with the age of water fluxes, with evapotranspiration age being younger compared with streamflow. However, the water age distributions followed a similar temporal behaviour dominated by climatic seasonality. Stream water ages increased during the dry season (greater than 1 year) and decreased with increased streamflow (a few weeks old) during the wet season. We further show that the ratios of the streamwater age to stored water age distribution and the water age distribution of actual evapotranspiration to the stored water age distribution from constrained models could potentially serve as useful hydrological indicators of catchment functioning. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrological response to thinning a small jarrah (Eucalyptus marginata) forest catchment

The jarrah (Eucalyptus marginata) forest on a small catchment was thinned early in 1983 to study the effect on catchment hydrology. The thinning reduced canopy cover, basal area and stocking about two-thirds. Rainfall during the pre and post-treatment periods was 21% and 10%, respectively, below the long-term average. Streamflow increased from 0.5% of rainfall (4.3 mm) before thinning to 7.6% of rainfall (90 mm) 9 years after thinning. Streamflow duration increased, with the largest increases in streamflow in the wet winter months of June-October. The deep groundwater level at a midslope location increased by 8 m and at a valley location by 4 m in the 8 years after thinning. There was no indication of a new equilibrium being reached for either streamflow or groundwater, thus further increases in streamflow and groundwater level are likely.     

Modelling the impacts of land-cover change on streamflow dynamics of a tropical rainforest headwater catchment

Abstract

A modelling experiment is used to examine different land-use scenarios ranging from extreme deforestation (31% forest cover) to pristine (95% forest cover) conditions and related Payment for Ecosystem Services (PES) schemes to assess whether a change in streamflow dynamics, discharge extremes and mean annual water balance of a 73.4-km² tropical headwater catchment in Costa Rica could be detected. A semi-distributed, conceptual rainfall–runoff model was adapted to conceptualize the empirically-based, dominant hydrological processes of the study area and was multi-criteria calibrated using different objective functions and empirical constraints on model simulations in a Monte Carlo framework to account for parameter uncertainty. The results suggest that land-use change had relatively little effect on the overall mean annual water yield (<3%). However, streamflow dynamics proved to be sensitive in terms of frequency, timing and magnitude of discharge extremes. For low flows and peak discharges of return periods greater than one year, land use had a minor influence on the runoff response. Below these thresholds (<1-year return period), forest cover potentially decreased runoff peaks and low flows by as much as 10%, and non-forest cover increased runoff peaks and low flows by up to 15%. The study demonstrated the potential for using hydrological modelling to help identify the impact of protection and reforestation efforts on ecosystem services.

Editor Z.W. Kundzewicz

Citation Birkel, C., Soulsby, C., and Tetzlaff, D., 2012. Modelling the impacts of land-cover change on streamflow dynamics of a tropical rainforest headwater catchment. Hydrological Sciences Journal, 57 (8), 1543–1561.     

Effect of single and multi-site calibration techniques on hydrological model performance,parameter estimation and predictive uncertainty: a case study in the Logone catchment,Lake Chad basin

Understanding hydrological processes at catchment scale through the use of hydrological model parameters is essential for enhancing water resource management. Given the difficulty of using lump parameters to calibrate distributed catchment hydrological models in spatially heterogeneous catchments, a multiple calibration technique was adopted to enhance model calibration in this study. Different calibration techniques were used to calibrate the Soil and Water Assessment Tool (SWAT) model at different locations along the Logone river channel. These were: single-site calibration (SSC); sequential calibration (SC); and simultaneous multi-site calibration (SMSC). Results indicate that it is possible to reveal differences in hydrological behavior between the upstream and downstream parts of the catchment using different parameter values. Using all calibration techniques, model performance indicators were mostly above the minimum threshold of 0.60 and 0.65 for Nash Sutcliff Efficiency (NSE) and coefficient of determination (R ²) respectively, at both daily and monthly time-steps. Model uncertainty analysis showed that more than 60% of observed streamflow values were bracketed within the 95% prediction uncertainty (95PPU) band after calibration and validation. Furthermore, results indicated that the SC technique out-performed the other two methods (SSC and SMSC). It was also observed that although the SMSC technique uses streamflow data from all gauging stations during calibration and validation, thereby taking into account the catchment spatial variability, the choice of each calibration method will depend on the application and spatial scale of implementation of the modelling results in the catchment.     

Water yield issues in the jarrah forest of south-western Australia

The jarrah forest of south-western Australia produces little streamflow from moderate rainfall. Water yield from water supply catchments for Perth, Western Australia, are low, averaging 71 mm (7% of annual rainfall). The low water yields are attributed to the large soil water storage available for continuous use by the forest vegetation. A number of water yield studies in south-western Australia have examined the impact on water yield of land use practices including clearing for agricultural development, forest harvesting and regeneration, forest thinning and bauxite mining. A permanent reduction in forest cover by clearing for agriculture led to permanent increases of water yield of approximately 28% of annual rainfall in a high rainfall catchment. Thinning of a high rainfall catchment led to an increase in water yield of 20% of annual rainfall. However, it is not clear for how long the increased water yield will persist. Forest harvesting and regeneration have led to water yield increases of 16% of annual rainfall. The subsequent recovery of vegetation cover has led to water yields returning to pre-disturbance levels after an estimated 12–15 years. Bauxite mining of a high rainfall catchment led to a water yield increase of 8% of annual rainfall, followed by a return to pre-disturbance water yield after 12 years. The magnitude of specific streamflow generation mechanisms in small catchments subject to forest disturbance vary considerably, typically in a number of distinct stages. The presence of a permanent groundwater discharge area was shown to be instrumental in determining the magnitude of the streamflow response after forest disturbance. The long-term prognosis for water yield from areas subject to forest thinning, harvesting and regeneration, and bauxite mining are uncertain, owing to the complex interrelationship between vegetation cover, tree height and age, and catchment evapotranspiration. Management of the forest for water yield needs to acknowledge this complexity and evaluate forest management strategies both at the large catchment scale and at long time-scales. The extensive network of small catchment experiments, regional studies, process studies and catchment modelling at both the small and large scale, which are carried out in the jarrah forest, are all considered as integral components of the research to develop these management strategies to optimise water yield from the jarrah forest, without forfeiting other forest values.     

Multi‐variable and multi‐site calibration and validation of SWAT in a large mountainous catchment with high spatial variability

Many methods developed for calibration and validation of physically based distributed hydrological models are time consuming and computationally intensive. Only a small set of input parameters can be optimized, and the optimization often results in unrealistic values. In this study we adopted a multi‐variable and multi‐site approach to calibration and validation of the Soil Water Assessment Tool (SWAT) model for the Motueka catchment, making use of extensive field measurements. Not only were a number of hydrological processes (model components) in a catchment evaluated, but also a number of subcatchments were used in the calibration. The internal variables used were PET, annual water yield, daily streamflow, baseflow, and soil moisture. The study was conducted using an 11‐year historical flow record (1990–2000); 1990–94 was used for calibration and 1995–2000 for validation. SWAT generally predicted well the PET, water yield and daily streamflow. The predicted daily streamflow matched the observed values, with a Nash–Sutcliffe coefficient of 0·78 during calibration and 0·72 during validation. However, values for subcatchments ranged from 0·31 to 0·67 during calibration, and 0·36 to 0·52 during validation. The predicted soil moisture remained wet compared with the measurement. About 50% of the extra soil water storage predicted by the model can be ascribed to overprediction of precipitation; the remaining 50% discrepancy was likely to be a result of poor representation of soil properties. Hydrological compensations in the modelling results are derived from water balances in the various pathways and storage (evaporation, streamflow, surface runoff, soil moisture and groundwater) and the contributions to streamflow from different geographic areas (hill slopes, variable source areas, sub‐basins, and subcatchments). The use of an integrated multi‐variable and multi‐site method improved the model calibration and validation and highlighted the areas and hydrological processes requiring greater calibration effort. Copyright © 2005 John Wiley & Sons, Ltd.     

Simulating hydrological response for the R‐5 catchment: comparison of two models and the impact of the roads

In this paper the performance of two hydrological‐response models is evaluated and compared based upon simulations for a single rainfall–runoff event. The two models are QPBRRM, a relatively simple model of Horton overland flow, and InHM, a comprehensive physics‐based model of each of the known streamflow generation mechanisms. The rainfall–runoff event focused upon in this study is from the small rangeland catchment in Oklahoma known as R‐5. When calibrated, both QPBRRM and InHM are shown to effectively simulate the R‐5 event. The calibration procedures used in this study for QPBRRM and InHM were quite different. The calibration of QPBRRM was a curve fitting exercise, whereas the calibration of InHM was based upon an internally valid estimate of the continuous head field. In this study QPBRRM did not perform well outside of the calibrated range. The impact of the roads cutting across the R‐5 catchment is simulated with InHM and discussed for the first time in the study reported here. The relative merits of QPBRRM and InHM are each discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

How informative are stream level observations in different geographic regions?

Simple runoff models with a low number of model parameters are generally able to simulate catchment runoff reasonably well, but they rely on model calibration, which makes their use in ungauged basins challenging. In a previous study it has been shown that a limited number of streamflow measurements can be quite informative for constraining runoff models. In practice, however, instead of performing such repeated flow measurements, it might be easier to install a stream level logger. Here, a dataset of 600+ gauged basins in the USA was used to study how well models perform when only stream level data, rather than streamflow data, are available. A runoff model (the HBV model) was calibrated assuming that only stream level observations were available, and the simulations were evaluated on the full observed streamflow record. The results indicate that stream level data alone can already provide surprisingly good model simulation results in humid catchments, whereas in arid catchments some form of quantitative information (e.g. a streamflow observation or a regional average value) is needed to obtain good results. These results are encouraging for hydrological observations in data scarce regions as level observations are much easier to obtain than streamflow measurements. Based on runoff modelling, it might even be possible to derive streamflow time series from the level data obtained from loggers, satellites or community‐based approaches. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrograph separation using tracers and digital filters to quantify runoff components in a semi‐arid mesoscale catchment

Chemical hydrograph separation using electrical conductivity and digital filters is applied to quantify runoff components in the 1,640 km² semi‐arid Kaap River catchment and its subcatchments in South Africa. A rich data set of weekly to monthly water quality data ranging from 1978 to 2012 (450 to 940 samples per site) was analysed at 4 sampling locations in the catchment. The data were routinely collected by South Africa's national Department of Water and Sanitation, using standard sampling procedures. Chemical hydrograph separation using electrical conductivity (EC) as a tracer was used as reference and a recursive digital filter was then calibrated for the catchment. Results of the two‐component hydrograph separation indicate the dominance of baseflow in the low flow regime, with a contribution of about 90% of total flow; however, during the wet season, baseflow accounts for 50% of total flow. The digital filter parameters were very sensitive and required calibration, using chemical hydrograph separation as a reference. Calibrated baseflow estimates ranged from 40% of total flow at the catchment outlet to 70% in the tributaries. The study demonstrates that routinely monitored water quality data, especially EC, can be used as a meaningful tracer, which could also aid in the calibration of a digital filter method and reduce uncertainty of estimated flow components. This information enhances our understanding of how baseflow is generated and contributed to streamflow throughout the year, which can aid in quantification of environmental flows, as well as to better parameterize hydrological models used for water resources planning and management. Baseflow estimates can also be useful for groundwater and water quality management.     

Future land cover and climate may drive decreases in snow wind-scour and transpiration,increasing streamflow at a Colorado,USA headwater catchment

Understanding how land cover change will impact water resources in snow-dominated regions is of critical importance as these locations produce disproportionate runoff relative to their land area. We coupled a land cover evolution model with a spatially explicit, physics-based, watershed process model to simulate land cover change and its impact on the water balance in a 5.0 km² headwater catchment spanning the alpine–subalpine transition on the Colorado Front Range. We simulated two potential futures both with greater air temperature (+4°C/century) and more precipitation (+15%/century, MP) or less precipitation (−15%/century, LP) from 2000 to 2100. Forest cover in the catchment increased from 72% in 2000 to 84% and 83% in 2050 and to 95% and 92% in 2100 for MP and LP, respectively. Surprisingly, increases in forest cover led to mean increases in annual streamflow production of 12 mm (6%) and 2 mm (1%) for MP and LP in 2050 with an annual control streamflow of 208 mm. In 2100, mean streamflow production increased by 91 mm (44%) and 61 mm (29%) for MP and LP. This result counters previous work as runoff production increased with forested area due to decreases in snow wind-scour and increases in drifting leeward of vegetation, highlighting the need to better understand the impacts of forest expansion on the spatial pattern of snow scour, deposition and catchment effective precipitation. Identifying the hydrologic response of mountainous areas to climate warming induced land cover change is critically important due to the potential water resources impacts on downstream regions.     

Predicting water yield from a mountain ash forest catchment using a terrain analysis based catchment model

The structure, capabilities and performance of a distributed parameter hydrologic model are described. The model, called Topog-Yield, permits a transient analysis of unsaturated-saturated flow and evapotranspiration to be performed across complex terrain using a one-dimensional framework. It is applied to a 0.32 km² mountain ash (Eucalyptus regnans) forest catchment in the central Victorian highlands, Australia. We compare observed and predicted daily runoff values for the site over a continuous 12 year period (1972–1983) when the catchment vegetation was in an undisturbed climax condition. All input parameter values were based on published or measured data, although some variables were adjusted within the range of known variability to yield a best fit between predicted and observed streamflow in the first year of simulation, 1972. Although the model was ‘calibrated’ for the first year, all variables other than climatic inputs remained fixed for the following 11 years. Modelled and observed daily runoff values compare well throughout the period of simulation, despite a wide range of climatic conditions. When modelled daily runoff values were lumped on a monthly basis, the model was able to explain 87% of the variation in observed monthly streamflows over the 12 year period. Modelled annual runoff was within ±5% of observed values for 6 of the 12 years of record. Annual runoff prediction errors exceeded ±10% of observed values in only 2 of the 12 years. By the end of the 12 year simulation, the model had over-predicted runoff by less than 5%. Input data requirements and model results are discussed in the light of a preliminary sensitivity analysis.     

Model calibration using hydropedological insights to improve the simulation of internal hydrological processes using SWAT+

Soils affect the distribution of hydrological processes by partitioning precipitation into different components of the water balance. Therefore, understanding soil-water dynamics at a catchment scale remains imperative to future water resource management. In this study, the value of hydropedological insights was examined to calibrate a processes-based model. Soil morphology was used as soft data to assist in the calibration of the Soil Water Assessment Tool (SWAT+) model at five different catchment scales (48, 56, 174, 674, and 2421 km²) in the Sabie River catchment, South Africa. The aim of this study was to calibrate the SWAT+ model to accurately simulate long-term monthly streamflow predictions as well as to reflect internal soil hydrological processes using a procedure focusing on hydropedology as a calibration tool in a multigauge system. Results indicated that calibration improved streamflow predictions where R² improved by 2%–8%. Nash-Sutcliffe Efficiency (NSE) improved from negative correlations to values exceeding 0.5 at four of the five catchment scales compared to the uncalibrated model. Results confirm that soil mapping units can be calibrated individually within SWAT+ to improve the representation of hydrological processes. Particularly, the spatial linkage between hydropedology and hydrological processes, which is captured within the soil map of the catchment, can be adequately reflected within the model simulations after calibration. This research will lead to an improved understanding of hydropedology as soft data to improve hydrological modelling accuracy.     

Ecohydrologic separation alters interpreted hydrologic stores and fluxes in a headwater mountain catchment

Recent studies have demonstrated that compartmentalized pools of water preferentially supply either plant transpiration (poorly mobile water) or streamflow and groundwater (highly mobile water) in some catchments, a phenomenon referred to as ecohydrologic separation. The omission of processes accounting for ecohydrologic separation in standard applications of hydrological models is expected to influence estimates of water residence times and plant water availability. However, few studies have tested this expectation or investigated how ecohydrologic separation alters interpretations of stores and fluxes of water within a catchment. In this study, we compare two rainfall‐runoff models that integrate catchment‐scale representations of transport, one that incorporates ecohydrologic separation and one that does not. The models were developed for a second‐order watershed at the H.J. Andrews Experimental Forest (Oregon, USA), the site where ecohydrologic separation was first observed, and calibrated against multiple years of stream discharge and chloride concentration. Model structural variations caused mixed results for differences in calibrated parameters and differences in storage between reservoirs. However, large differences in catchment storage volumes and fluxes arise when considering only mobile water. These changes influence interpreted residence times for streamflow‐generating water, demonstrating the importance of ecohydrologic separation in catchment‐scale water and solute transport.     

The Kings River Experimental Watersheds: Infrastructure and data

The Kings River Experimental Watersheds (KREW) were established in 2002 to expand our knowledge of catchment physical, chemical, and biological processes in Sierra Nevada headwater forests, and to better understand the impacts of prescribed burning and forest thinning on these processes. Two elevation strata (high and low) were selected for the KREW sites, with four independent catchments and one nested catchment within each stratum. Both high and low elevation study areas were instrumented for continuous measurements of meteorology, streamflow, and turbidity. Atmospheric and stream chemistry, suspended sediment concentration, and bedload sediment delivery were measured on a regular schedule. Soil chemical and physical properties and vegetation were systematically sampled before and after the initial thinning and prescribed burning treatments, which were implemented between 2012 and 2016. Post-treatment data collection continues today as we explore opportunities for the second round of possible treatments. The critical research infrastructure and long-term baseline data collection has been instrumental in building partnerships with downstream managers, end users, non-governmental organizations, academic researchers, and national research programmes. Contributions to date include fundamental understanding of magnitude and variability of nutrient deposition; carbon, nutrient, and major ion dynamics in headwater streams; aquatic algae and macroinvertebrate populations; vegetation composition and structure; and streamflow responses to precipitation in the two elevation strata. Data from the experimental watersheds also support calibration and validation of diverse hydrologic models used for water resources planning.     

Assessment of runoff and sediment yield in the Miyun Reservoir catchment by using SWAT model

The Soil and Water Assessment Tool (SWAT) was used to simulate the transport of runoff and sediment into the Miyun Reservoir, Beijing in this study. The main objective was to validate the performance of SWAT and the feasibility of using this model as a simulator of runoff and sediment transport processes at a catchment scale in arid and semi‐arid area in North China, and related processes affecting water quantity and soil erosion in the catchment were simulated. The investigation was conducted using a 6‐year historical streamflow and sediment record from 1986 to 1991; the data from 1986 to 1988 was used for calibration and that from 1989 to 1991 for validation. The SWAT generally performs well and could accurately simulate both daily and monthly runoff and sediment yield. The simulated daily and monthly runoff matched the observed values satisfactorily, with a Nash‐Sutcliffe coefficient of greater than 0·6, 0·9 and a coefficient of determination 0·75, 0·9 at two outlet stations (Xiahui and Zhangjiafen stations) during calibration. These values were 0·6, 0·85 and 0·6, 0·9 during validation. For sediment simulation, the efficiency is lower than that for runoff. Even so, the Nash‐Sutcliffe coefficient and coefficient of determination were greater than 0·48 and 0·6 for monthly sediment yield during calibration, and these values were greater than 0·84 and 0·95 during validation. Sensitivity analysis shows that sensitive parameters for the simulation of discharge and sediment yield include curve number, base flow alpha factor, soil evaporation compensation factor, soil available water capacity, soil profile depth, surface flow lag time and channel re‐entrained linear parameter, etc. Copyright © 2009 John Wiley & Sons, Ltd.     

Spatial GR4J conceptualization of the Tamor glaciated alpine catchment in Eastern Nepal: evaluation of GR4JSG against streamflow and MODIS snow extent

Snow and glacial melt processes are an important part of the Himalayan water balance. Correct quantification of melt runoff processes is necessary to understand the region's vulnerability to climate change. This paper describes in detail an application of conceptual GR4J hydrological model in the Tamor catchment in Eastern Nepal using typical elevation band and degree‐day factor approaches to model Himalayan snow and glacial melt processes. The model aims to provide a simple model that meets most water planning applications. The paper contributes a model conceptualization (GR4JSG) that enables coarse evaluation of modelled snow extents against remotely sensed Moderate Resolution Imaging Spectroradiometer snow extent. Novel aspects include the glacial store in GR4JSG and examination of how the parameters controlling snow and glacial stores correlate with existing parameters of GR4J. The model is calibrated using a Bayesian Monte Carlo Markov Chain method against observed streamflow for one glaciated catchment with reliable data. Evaluation of the modelled streamflow with observed streamflow gave Nash Sutcliffe Efficiency of 0.88 and Percent Bias of <4%. Comparison of the modelled snow extents with Moderate Resolution Imaging Spectroradiometer gave R² of 0.46, with calibration against streamflow only. The contribution of melt runoff to total discharge from the catchment is 14–16% across different experiments. The model is highly sensitive to rainfall and temperature data, which suffer from known problems and biases, for example because of stations being located predominantly in valleys and at lower elevations. Testing of the model in other Himalayan catchments may reveal additional limitations. © 2016 The Authors. Hydrological Processes published by John Wiley & Sons Ltd.     

The relevance of preferential flow in catchment scale simulations: Calibrating a 3D dual-permeability model using DREAM

The occurrence of preferential flow in the subsurface has often been shown in field experiments. However, preferential flow is rarely included in models simulating the hydrological response at the catchment scale. If it is considered, preferential flow parameters are typically determined at the plot scale and then transferred to larger-scale simulations. Here, we successfully used the optimization algorithm DiffeRential Evolution Adaptive Metropolis (DREAM) to calibrate a 3D physics-based dual-permeability model directly at the catchment scale. In order to keep computational costs of the optimization routine at a reasonable level, we limited the number of parameters to be calibrated to the ones that had been shown before to be most influential for the simulation of discharge. We also calibrated parameters of the matrix domain and the macropore domain with a fixed parameter ratio between soil layers instead of calibrating every layer separately. These ratios reflected observed depth profiles of soil hydraulic properties at our study site. The dual-permeability parameter sets identified during calibration were able to simulate observed discharge time series satisfactorily but did not outperform a calibrated single-domain reference model scenario. Saturated hydraulic conductivities of the macropore domain were calibrated such that they became very similar to matrix saturated hydraulic conductivities, thereby effectively removing the effect of macropores. This suggests that the incorporation of vertical preferential flow as represented by the dual-permeability approach was not relevant for reproducing the hydrometric response reasonably well in the studied catchment. We also tested the scale-invariance of the calibrated dual-permeability parameter sets by using the parameter sets performing best at catchment scale to simulate plot-scale bromide depth profiles obtained from tracer irrigation experiments. This parameter transfer proved to be not successful, indicating that soil hydraulic parameters are scale-variant, independent of the direction of parameter transfer.     

MODELLING RAINFALL-RUNOFF FROM LARGE CATCHMENT TO BASIN SCALE: THE GOULBURN VALLEY,VICTORIA

A lumped parameter dynamic rainfall-runoff model, IHACRES, is applied to the large upland area (more than 4500 km²) of the Goulburn Valley Basin, Victoria, Australia to predict streamflow under different climatic conditions. This paper presents the first evaluation of a rainfall–runoff model at large catchment scale, which is comprehensive in terms of the number of catchments investigated and the number of calibration and simulation periods used. The basin is subdivided into 12 catchments (from 100 to 700 km²), each of which is calibrated separately. High values of model efficiency and low bias are consistently obtained for different calibration sub-periods for all catchments in the basin. Simulation or so-called validation tests are used to select the best models for each catchment. This allows simulation of the water regime during long historical (approximately 90 year) periods when only climatological (rainfall and temperature) data were available. This procedure is extremely important for the estimation of the effect of climate variability and of the possible impact of climate change on the hydrological regime in the region and, in particular, for supporting irrigation management of the basin. Analysis of a composite catchment (2417 km²) and its five separate subcatchments indicates that the information content in the rainfall–streamflow data is independent of catchment size. Dynamic modelling of the daily water balance at the macroscale is limited principally by the adequacy of the precipitation gauging network. When a good estimate of areal precipitation is available for a catchment, it is not necessary to consider subcatchment-scale variability for modelling if the only interest is the daily discharge and evaporation losses from the catchment.     

Modelling the impact of stormwater source control infiltration techniques on catchment baseflow

Stormwater management increasingly recognises the need to emulate, to the maximum extent possible, the flow regime of receiving waters in their pre‐development state. Hydrological models play a central role in assessing the catchment‐scale impacts of alternative stormwater management strategies. However, because of the complexity of physical processes involved in urban hydrology, particularly subsurface flows, the predictive performance of such models is often low. We investigated how the structure of hydrological models influenced the prediction of urbanisation and stormwater management impacts on baseflow. We calibrated three conceptual models of the same reference catchment and compared the modelled flow regime from different stormwater management scenarios, using each of the three model structures. Scenarios were assessed using six metrics, characterising the whole streamflow regime and in particular baseflow. Although the three models of the reference catchment represented the observed hydrograph well, the most complex structure developed using a thorough diagnostic of the catchment behaviour better captured the change in hydrological regime during dry years. Predictions of baseflow changes due to urbanisation varied significantly according to the model structure. Similarly, the models showed distinct responses to the stormwater management scenarios applied, especially for scenarios involving infiltration of stormwater at source. Our results confirm the importance of predicting the consequences of land use changes with conceptual models that are consistent with the hydrological behaviour of the study catchment. Future work should help to quantify the uncertainties due to model structure and thus provide practical guidance to the use of catchment models for assessing stormwater management strategies. Copyright © 2013 John Wiley & Sons, Ltd.