赣南合龙钨矿矿床地质、成岩成矿时代与成矿模式

合龙钨矿床位于南岭东西向构造岩浆带与北-北东向于山构造带交汇部位,是南岭东段于都-赣县矿集区的重要组成.合龙钨矿床是赣南地区近年在石英脉型钨矿勘查取得最重要突破的矿区,新发现钨多金属矿体达48条,新探明黑钨矿资源量3.5万余吨,WO3平均品位2.189％,深部具有大型以上资源潜力.合龙钨矿床以外带石英大脉型矿体与岩体内...     

缅甸克钦邦片马地区钨钼矿床特征及找矿标志

缅甸克钦邦果敢地区钨钼矿大地构造位于冈瓦纳和亲冈瓦纳大陆陆块群中缅马陆块群(亲冈瓦纳型)腾冲-毛淡棉微陆块内,成矿区带位于位于中国西南三江-东南亚巨型成矿带腾冲-毛淡棉以锡钨和稀有金属为主的成矿亚带贡山-腾冲锡、钨、钼、铁、铜铅锌成矿带中。钨钼矿体主要产于燕山期黑云母二长花岗岩岩体内构造破碎带内,矿体多呈脉状、侵染状或透镜状。矿石多浸染状矿石及热液脉型矿石,构造裂隙内以细脉状矿石最为主。矿体围岩蚀变为硅化、黄铁矿化,矿床成因类型属岩浆期后热液石英脉型。     

江西荡萍钨矿花岗岩年代学与成矿流体地球化学研究

荡坪钨矿床位于江西省大余县,是一产于花岗岩中的石英脉型钨矿床.构造位置上位于南岭东西构造带东段,与北东-北北东构造带衔接的复杂地段,属与西华山-荡坪复式花岗岩体有关的钨矿床.     

粤北白水寨石英脉型钨矿床地质特征及找矿前景

英德白水寨钨矿床位于粤北钨多金属成矿带雪山嶂矿田内,是近年来新发现的石英脉型钨矿床,初步探明储量已达中型规模。矿区浅部发育白钨矿线脉-细网脉密集带,往深部演化成黑钨矿细脉带,并在钙质地层发育地段形成了白钨矿体。与典型的石英脉型钨矿相比,该矿床具有浅部线细网-细脉带钨矿物"上白钨矿下黑钨矿"、发育细网脉与矽卡岩共存的白钨矿(化)体、矿石矿物组合中出现大量黄铁矿的特征,但总体属于石英脉型钨矿床,深部含矿岩浆热液是成矿的重要条件。详细的野外勘探资料显示,该矿床已具有"五层楼"成矿规律的雏形,物探成果指示深部岩体埋深0.5~1.2 km,而地表-浅部矿化带处于"五层楼"模式的细网脉标志带-细脉带的空间位置,矿区深部勘查脉带型钨矿有很大空间。     

湖南省临武县鸡脚山矿区钨多金属矿找矿前景分析

临武县鸡脚山矿区钨多金属矿位于香花岭矿田的南部,区内出露有燕山早期的花岗岩,断裂构造很发育（有NE向、NW向及近EW向断裂三组）,NE向构造破碎带型钨矿脉及NW向石英脉型钨矿脉数十条,其中NE向矿脉规模大、延伸稳定,矿床规模已达中型。本文通过对鸡脚山矿区钨多金属矿成矿地质条件及矿床地质特征的总结,认为该矿床属高-中温热液充填型钨多金属矿床,同时对该矿床的控矿因素进行了分析,得出了在鸡脚山矿区的深部及其外围还具有较大的找矿前景的结论。     

湖南郴州水源山矿区风化残坡积粘土型钨矿地质特征及成因

水源山矿区是湖南省湘南地质勘察院在开展东坡-高垄山地区铅锌钨锡多金属矿整装勘查时新发现的一处具大型规模前景的钨矿产地。矿区位于王仙岭岩体北东接触带附近,通过工作,在区内发现了风化残坡积型白钨矿、云英岩型白钨矿、云英岩型锡矿、石英脉型黑钨矿、矽卡岩型白钨矿及构造破碎带型铅锌多金属矿等六种类型矿床。其中风化残坡积粘土型白钨矿规模大(单矿体规模达大型)、类型新、远景好。该类型钨矿体的发现,为该区进一步找矿指明了方向。     

红岭花岗岩型钨(钼)矿床的某些地球化学特征

红岭钨矿是个脉钨矿床.我们937队在补充勘探期间,在石英脉型钨矿床的深部发现了含矿的白云母花岗岩体.在岩体突起部位的白云母花岗岩内接触带钨、铝、铋矿化强烈,其中钨已达工业要求.这种矿床类型的发现,对钨矿的成矿理论研究及找矿实践,都有重要意义. 矿区地质矿区位于粤北大东山-贵东-九连山构     

新疆巴里坤小加山钨矿地质特征与成因

小加山钨矿区位于东准噶尔成矿区中部南缘,处于博格达-哈尔里克构造带上。构造位置上矿区处于哈尔里克复式背斜中,构造线方向以EW向为主。矿区出露地层主要为中泥盆统大南湖组第一亚组第一段(D_2d_1~1)、和第二段(D_2d_1~2)。主要岩浆岩有石英闪长岩、黑云母二长花岗岩、钾长花岗岩及少量中酸性花岗闪长岩脉。矿体赋存于邻近海西晚期花岗岩侵入体附近的中泥盆统大南湖组第一亚组第二段(D_2d_1~2)的变质晶屑凝灰岩中。矿石类型为石英脉型黑钨矿石,有用金属主要为黑钨矿,黑钨矿石英脉分为灰色含钨石英脉和白色含钨石英脉2种。四极质谱分析法测得矿床流体包裹体气相成分以H_2O、CO_2为主,次为N_2、CH_4,此外还含有少量的Ar、C_2H_6,液相成分以Cl~-、Na~+为主,次为Ca~(2+),表明成矿流体主要为H_2O-CO_2-NaCl体系。矿床成因类型属于高温热液石英脉型黑钨矿床,矿体主要位于围岩裂隙构造。钨主要由侵入围岩地层中的地幔热液迁移富集而来,W元素迁移过程中,含钨络合物成矿流体分解进而沉淀成矿。     

赣南崇义地区淘锡坑钨矿的地质特征与成矿时代

江西省崇义县淘锡坑钨矿区位于南岭东西向构造带东段与武夷山北东-北北东向构造带南段的复合部位,是九龙脑-淘锡坑矿田的一个重要矿区,属于以石英脉型黑钨矿为主的钨多金属矿床.矿脉穿切于震旦系中,成矿主要受北西向断裂控制,成因与燕山期岩浆作用有关.选取含矿石英脉中与黑钨矿共生的辉钼矿进行Re-Os等时线年龄的测定,得到辉钼矿的等时线年龄为154 4Ma±3.8Ma,黑钨矿的模式年龄为164.0Ma±2.7Ma,表明该矿床形成于燕山早期.     

广东石人嶂钨矿床云英岩的稀土元素特征

<正>广东省石人嶂钨矿床位于华南湘赣粤钨矿成矿区西南部,成矿地质条件优越,是粤北钨矿化集中区北东部的一个垂向呈典型的"五层楼"模式的中型石英脉型黑钨矿床,也是我国生产规模较大的重要钨矿山之一(张少琴,2010)。尽管石英脉型黑钨矿石一直是矿山开采的唯一矿石类型,但石英脉型黑钨矿化并不是矿区唯一的矿     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。