Megacrysts in the Cenozoic basalt of the Tuoyun Basin,Southwest Tianshan

Abundant megacrysts of clinopyroxene, amphibole, anorthoclase, and phlogopite are found together with deep-seated xenoliths in the Cenozoic basalt of the Tuoyun Basin, Southwest Tianshan. The megacrysts are mainly in the cone sheet formed at the early stage of the volcanic activity. Clinopyrox-ene megacrysts are located in the lower part of the profile, with amphibole and phlogopite megacrysts in the middle part and anorthoclase megacrysts in the upper part. The crystal integrity, absence of de-formation fabric and their relation to the host basalt suggest that they were crystallized from the host magma and quickly transported to the surface. The mineralogical studies imply that the clinopyroxene megacrysts are of Al-augite with higher Al2O3 (>9%). Amphibole megacrysts are kaersutite rich in TiO2 (>4.5%). Sulfide inclusions such as pyrrhotite occur in some clinopyroxene and amphibole megacrysts. Thermodynamic calculations reveal that pyroxene megacrysts formed under the temperature of 1185.85―1199.85℃ and the pressure between 1.53 and 1.64 GPa comparable to the crust-mantle boundary and amphibole megacrysts crystallized under the pressure of around 0.85 GPa, temperature about 1000℃ comparable to the depth of 30 km. Anorthoclase megacrysts crystallized under the pressure between 0.8―1 GPa,temperature about 900℃.The absence of Ti-rich inclusions such as rutile can be considered as an evidence of quick magma ascending. The P-T conditions estimated via py-roxene megacrysts and phenocrysts compose a P-T path with a steep slope. It can be considered as another evidence of quick magma ascending. However, the estimated temperatures for amphibole megacrysts are markedly lower than those for pyroxene megacrysts given the same pressure. It probably shows that the amphiboles have crystallized at the vanguard of magma and under the vola-tile-rich condition. Thus, we can conclude that the Cenozoic basalts are produced in an extensional tectonic setting and the processes governing crystallization and ascending of the megacrysts are very complex.     

Olivine-spinifex basalt from the Tamba Belt, southwest Japan: Evidence for Fe- and high field strength element-rich ultramafic volcanism in Permian Ocean

Abstract   Permian basalt showing typical spinifex texture with >10 cm-long olivine pseudomorphs was discovered from the Jurassic Tamba accretionary complex in southwest Japan. The spinifex basalt occurs as a river boulder accompanied by many ferropicritic boulders in a Permian chert-greenstone unit. Groundmass of this rock is holocrystalline, suggesting a thick lava or sill for its provenance. Minor kaersutite in the groundmass indicates a hydrous magma. The spinifex basalt, in common with the associated ferropicritic rocks, is characterized by high high field strength element (HFSE) contents (e.g. Nb = 62 ppm and Zr = 254 ppm) and high-HFSE ratios (Al₂O₃/TiO₂ = 3.9, Nb/Zr = 0.24 and Zr/Y = 6.4) unlike typical komatiites. The spinifex basalt and ferropicrite might represent the upper fractionated melt and the lower olivine-rich cumulate, respectively, of a single ultramafic sill (or lava) as reported from the early Proterozoic Pechenga Series in Kola Peninsula. Their parental magma might have been produced by hydrous melting of a mantle plume that was dosed with Fe- and HFSE-rich garnet pyroxenite. The spinifex basalt is an evidence for the Pechenga-type ferropicritic volcanism taken place in a Permian oceanic plateau, which accreted to the Asian continental margin as greenstone slices in Jurassic time.     

Topography of the Moho and Conrad discontinuities in the Kyushu district,Southwest Japan

The first P-arrival time data from local earthquakes are inverted for two-dimensional variation of the depths to the Conrad and Moho discontinuities in the Kyushu district, southwest Japan. At the same time, earthquake hypocenters and station corrections are determined from the data. The depths to the discontinuities are estimated by minimizing the travel time residuals of first P-arrival phases for 608 earthquakes observed at 57 seismic stations. In the land area of Kyushu, the Conrad and Moho discontinuities are located within the depth ranges of 16–18 and 34–40 km, respectively. The Conrad discontinuity is not as largely undulated as the Moho discontinuity. The depth to the Moho is deep along the east coast of Kyushu, and the deepest Moho is closely related to markedly low velocity of P wave. We regard the deepest Moho as reflecting the Kyushu–Palau ridge subducting beneath the Kyushu district, together with the Philippine Sea slab. In western Kyushu, the shallow Moho is spreading in the north–northeast–south–southwest direction in the Okinawa trough region. Based on the presence of low-velocity anomaly in three-dimensional velocity structure and seismogenic stress field of shallow crustal earthquakes, the shallow Moho is interpreted as being due to lower crustal erosion associated with a small-scale mantle upwelling in the Okinawa trough region. The velocity discontinuity undulation basically has insignificant effect on hypocenter determination of the local earthquakes, but the Moho topography makes changes in focal depths of some upper mantle earthquakes. The depth variation of the Moho discontinuity has a good correlation with the Bouguer gravity anomaly map; i.e., the shallow Moho of western Kyushu and the deep Moho of eastern Kyushu closely correlate with the positive and negative Bouguer gravity anomalies, respectively.     

Rheology of the lower crust beneath the northern part of North China: Inferences from lower crustal xenoliths from Hannuoba basalts, Hebei Province, China

Lower crustal xenoliths brought up rapidly by basaltic magma onto the earth surface may provide di-rect information on the lower crust. The main purpose of this research is to gain an insight into the rheology of the lower crust through the detailed study of lower crustal xenoliths collected from the Hannuoba basalt, North China. The lower crustal xenoliths in this area consist mainly of two pyroxene granulite, garnet granulite, and light-colored granulite, with a few exception of felsic granulite. The equilibration temperature and pressure of these xenoliths are estimated by using geothermometers and geobarometers suitable for lower crustal xenoliths. The obtained results show that the equilibration temperature of these xenoliths is within the range of 785―900℃, and the equilibrium pressure is within the range of 0.8―1.2 GPa, corresponding to a depth range of 28―42 km. These results have been used to modify the previously constructed lower crust-upper mantle geotherm for the studied area. The dif-ferential stress during the deformation process of the lower crustal xenoliths is estimated by using recrystallized grain-size paleo-piezometer to be in the range of 14―20 MPa. Comparing the available steady state flow laws for lower crustal rocks, it is confirmed that the flow law proposed by Wilks et al. in 1990 is applicable to the lower crustal xenoliths studied in this paper. The strain rate of the lower crust estimated by using this flow law is within the range of 10-13―10-11 s-1, higher than the strain rate of the upper mantle estimated previously for the studied area (10-17―10-13 s-1); the equivalent viscosity is estimated to be within the range of 1017―1019Pa·s, lower than that of the upper mantle (1019―1021 Pa·s). The constructed rheological profiles of the lower crust indicate that the differential stress shows no significant linear relation with depth, while the strain rate increases with depth and equivalent vis-cosity decrease with depth. The results support the viewpoint of weak lower continental crust.     

Permian radiolarians,chert and basalt from the Daxinshan Formation in Lancangjiang belt of southwestern Yunnan,China

The stratigraphical sequences composed of chert and basalt were found in the Daxinshan area of Simao and the Manbie area of Jinghong, southwestern Yunnan. The Middle Permian to ealiest Late Permian radiolarians, such as Follicucullus and Pseudoalbaillella, have been identified from the chert. The chert from the Manbie area of Jinghong is characterized by high SiO₂content (over 92%), large ratios of MnO/TiO₂ (2.15) and low ratios of Al/(Al+Fe+Mn) (≤0.1) and Ce/Ce*(0.4), which indicate that the chert was deposited in pelagic basin. The chert from the Daxinshan area of Simao, however, is characterized by low SiO₂ content, low ratios of MnO/TiO₂ (0.27) and high ratios of Al/(Al+Fe+Mn) (0.49) and Ce/Ce*(0.88), which imply that the chert was deposited in continental margin basin. The basalts from the both areas belong to tholeiite series, and the chemical compositions of their major, rare earth and trace elements show the characteristics of MORB. These results evidence that there are volcanic rocks and chert sequences representing pelagic basin and oceanic basin near continent. These sequences and the formerly reported island-arc volcanic rock sequences imply that the Daxinshan Formation in the Lancangjiang belt represents a sedimentary assemblage formed in active continental margin basin.     

Early Permian zircon uranium-lead ages for plagiogranites in the Yakuno ophiolite, Asago district, Southwest Japan

Abstract Prior work has defined a two-stage history for Yakuno ophiolite petrogenesis consisting of older oceanic basement, and younger island-arc rocks and subordinate elastic rocks. First-stage Yakuno rocks have transitional-type M orb or oceanic plateau affinities, and second-stage Yakuno rocks are more similar to immature island-arc settings. Zircon U-Pb isotopic dates of plagiogranite from the Asago district of Southwest Japan yield crystallization ages of 285 ± 2 Ma for the first-stage ophiolite component, and 282 ± 2 Ma for the second-stage component of the ophiolite. These results indicate that the two petrologi-cally distinct components of the Yakuno ophiolite in this area formed in a short time interval in the Early Permian. The zircon U-Pb crystallization ages provide a maximum age for the base of the stratigraphically overlying Maizuru Group.     

Rb–Sr isochron ages of the Cretaceous granitoids in the Ryoke belt, Kinki district, Southwest Japan

Abstract Granitoids are widely distributed in the Ryoke belt and have been divided into four main igneous stages based on their field setting. In this paper, we present Rb–Sr isochron ages for the younger Ryoke granitoids (second stage to fourth stage) in the Kinki district. The Yagyu granite (second stage) gave a Rb–Sr whole‐rock isochron age of 74.6 ± 10.9 Ma with an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70938 ± 0.00016, and a Rb–Sr mineral isochron age of 71.8 ± 0.1 Ma. The Narukawa granite (second stage) yielded a Rb–Sr mineral isochron age of 79.5 ± 0.4 Ma. A Rb–Sr whole‐rock isochron age of 78.3 ± 3.0 Ma with an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70764 ± 0.00014 was obtained for the Takijiri adamellite (third stage). The Katsuragi quartzdiorite (fourth stage) gave a Rb–Sr whole‐rock isochron age of 85.1 ± 18.3 Ma (initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70728 ± 0.00006), and mineral isochron ages of 76.9 ± 0.5 Ma and 74.8 ± 0.5 Ma. The Minamikawachi granite (fourth stage) gave a Rb–Sr whole‐rock isochron age of 72.8 ± 2.0 Ma with an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70891 ± 0.00021. These age data indicate that the igneous activity in younger Ryoke granitoids of Kinki district occurred between 80 and 70 Ma, except for the Katsuragi quartz diorite. The isotopic data on the various igneous stages in Kinki district correspond with the relative timing from field observations. Based on the initial ⁸⁷Sr/⁸⁶Sr ratios, the granitoids of the Ryoke belt in Kinki district are spatially divided into two groups. One is granitoids with initial ⁸⁷Sr/⁸⁶Sr ratio of 0.707–0.708, distributed in the southern part of the Ryoke belt. The other is granitoids with initial ⁸⁷Sr/⁸⁶Sr ratio of 0.708–0.710 distributed in the northern part of the Ryoke belt. The initial ⁸⁷Sr/⁸⁶Sr ratios of granitoids increase with decreasing (becoming younger) Rb–Sr whole‐rock isochron ages.     

Middle Miocene to Quaternary primary basalt and high magnesian andesite magmas of North Hokkaido, Japan: Source mantle characteristics and degrees of partial melting

Abstract   Middle Miocene to Quaternary primitive basalts and high magnesian andesite (HMA) in North Hokkaido resulted from three periods of intense volcanism; early-stage (12–10 Ma), middle-stage (9–7 Ma) and late-stage (3–0 Ma). Based on the chemical compositions of olivines and chromian spinels and bulk chemistry of the primitive rocks, we examined depths of segregation of the calculated primary magmas and the degrees of partial melting of the source mantle. In the context of asthenospheric mantle upwelling, petrological data from the present study can be accounted for by the secular change in the depth of magma segregation from the upwelled asthenospheric mantle, which is composed of fertile peridotite. Thus, the early-stage primary magmas were generated by higher degrees of partial melting of the shallower part of hot asthenospheric mantle, whereas the middle- and late-stage primary magmas resulted from lower degrees of partial melting of a deeper part of the asthenospheric mantle. The early-stage HMA magma was generated by partial melting of the remnant subcontinental lithospheric mantle composed of refractory peridotite. This melting might have resulted from an increased geothermal gradient caused by upwelling of hot asthenosphere.     

Petrographic study of the Miocene Mizunami Group,Central Japan: Detection of unrecognized volcanic activity in the Setouchi Province

A petrographic study of sandstones from the Miocene Mizunami Group in Central Japan has been performed on core samples from a single borehole, in order to evaluate the provenance of the sedimentary rock. Evaluation of the provenance is based on bulk mineral, heavy mineral and plagioclase contents and on whole rock chemical compositions. The sandstones studied are divisible into three types; the first type is characterized by the occurrence of biotite and plagioclase ranging from albite to oligoclase, the second type is characterized by the dominance of amphibole and labradorite with pyroxene (clinopyroxene > orthopyroxene), and the third type is characterized by the dominance of pyroxene (orthopyroxene > clinopyroxene) and andesine with lesser labradorite, bytownite and anorthite. The first type is interpreted to be derived from the basement granite, whereas the others were derived mostly from volcanic ash, judging from their mineral compositions. The volcanic activity that supplied the volcanic ash to the Mizunami Basin occurred in two phases, distinguishable by variations in their mineralogical and geochemical compositions, an indication of change in character of the volcanic activity. This petrographic study of the sandstones in the Mizunami Group suggests that unrecognized volcanic activity occurred around the Mizunami Basin, even though potential provenance of the volcanic ash has not yet been identified.     

Dunite channels within a harzburgite layer from the Horoman peridotite complex,Japan: Possible pathway for magmas

Two discordant dunite channels in a polished slab were collected from a harzburgite layer in the Horoman orogenic lherzolite massif, Hokkaido, Japan. The dunite channels show extreme grain‐size variations, and include very large olivine megacrysts up to 1.6 m long. Spinel‐rich pyroxenite veins or veinlets occasionally cross‐cut the olivine megacrysts. Mineral compositions differ between channels, and the mineral compositions and textures of the dunite channels and the host harzburgite suggest a replacive origin for the dunites. The Sr and Nd isotopic ratios of clinopyroxene separates from the pyroxenite veins in two dunite channels are different, but these ratios are generally similar to those of mid‐ocean ridge basalts. Assuming the channels formed by the through‐flow of melts, then the trace element compositions of the melts estimated from the clinopyroxenes are broadly similar. The melts have similar features such as enriched in incompatible elements and depleted in heavy rare earth elements, but there are differences in the depletions in Ti and Ba, indicating melts that were different but of similar origins. A Rb–Sr crystallization age (~ 52 Ma) was obtained for clinopyroxene–orthopyroxene pairs in a dunite channel and its host harzburgite. The distinctive dunite channels with megacrysts formed as a result of the through‐flow of mafic magma(s), and those magmas had trace and minor element contents that are indicative of contributions of a melt derived from subducted oceanic lithosphere.     

Petrological variation of large-volume felsic magmas from Hakkoda-Towada caldera cluster: Implications for the origin of high-K felsic magmas in the Northeast Japan Arc

Abstract The Hakkoda‐Towada caldera cluster (HTCC) is a typical Late Cenozoic caldera cluster located in the northern part of the Northeast Japan Arc. The HTCC consists of five caldera volcanoes, active between 3.5 Ma and present time. The felsic magmas can be classified into high‐K (HK‐) type and medium‐ to low‐K (MLK‐) type based on their whole‐rock chemistry. The HK‐type magmas are characterized by higher K₂O and Rb contents and higher ⁸⁷Sr/⁸⁶Sr ratios than MLK‐type magmas. Both magmas cannot be derived from fractional crystallization of any basaltic magma in the HTCC. Assimilation‐fractional crystallization model calculations show that crustal assimilation is necessary for producing the felsic magmas, and HK‐type magmas are produced by higher degree of crustal assimilation with fractional crystallization than MLK‐type magmas. Although MLK‐type magmas were erupted throughout HTCC activity, HK‐type magmas were erupted only during the initial stage. The temporal variations of magma types suggest the large contribution of crustal components in the initial stage. A major volcanic hiatus of 3 my before the HTCC activity suggests a relatively cold crust in the initial stage. The cold crust probably promoted crustal assimilation and fractional crystallization, and caused the initial generation of HK‐type magmas. Subsequently, the repeated supply of mantle‐derived magmas raised temperature in the crust and formed relatively stable magma pathways. Such a later system produced MLK‐type magmas with lesser crustal components. The MLK‐type magmas are common and HK‐type magmas are exceptional during the Pliocene–Quaternary volcanism in the Northeast Japan Arc. This fact suggests that exceptional conditions are necessary for the production of HK‐type magmas. A relatively cold crust caused by a long volcanic hiatus (several million years) is considered as one of the probable conditions. Intensive crustal assimilation and fractional crystallization promoted by the cold crust may be necessary for the generation of highly evolved HK‐type felsic magmas.     

Generation of rhyolite magmas by melting of subducting sediments in Shodo-Shima island, Southwest Japan, and its bearing on the origin of high-Mg andesites

Abstract Geochemical characteristics of rhyolites from the Miocene Setouchi volcanic belt in the Southwest Japan arc were examined. The following observations may be best explained by the derivation of rhyolite magmas by melting of subducting sediments as follows. (i) Sr-Nd-Pb isotope compositions of Setouchi rhyolites are close to those of the local trench-fill sediments; (ii) major element compositions of rhyolites are identical to those of experimentally produced sediment melts; and (iii) concentrations of incompatible elements in rhyolites are consistent with partial melting of the local trench-fill sediments in the presence of residual garnet. Furthermore, trace element and isotope signatures of Setouchi high-Mg andesites can be also rationalized by interaction of such rhyolitic sediment melts with overlying mantle peridotites.     

Coevolution of hydrology and topography on a basalt landscape in the Oregon Cascade Range,USA

Young basalt terrains offer an exceptional opportunity to study landscape and hydrologic evolution through time, since the age of the landscape itself can be determined by dating lava flows. These constructional terrains are also highly permeable, allowing one to examine timescales and process of geomorphic evolution as they relate to the partitioning of hydrologic flowpaths between surface and sub‐surface flow. The western slopes of the Cascade Range in Oregon, USA are composed of a thick sequence of lava flows ranging from Holocene to Oligocene in age, and the landscape receives abundant precipitation of between 2000 and 3500 mm per year. On Holocene and late Pleistocene lava landscapes, groundwater systems transmit most of the recharge to large springs (≥0·85 m³ s^?1) with very steady hydrographs. In watersheds >1 million years old, springs are absent, and well‐developed drainage networks fed by shallow subsurface stormflow produce flashy hydrographs. Drainage density slowly increases with time in this basalt landscape, requiring a million years to double in density. Progressive hillslope steepening and fluvial incision also occur on this timescale. Springs and groundwater‐fed streams transport little sediment and hence are largely ineffective in incising river valleys, so fluvial landscape dissection appears to occur only after springs are replaced by shallow subsurface stormflow as the dominant streamflow generation mechanism. It is proposed that landscape evolution in basalt terrains is constrained by the time required for permeability to be reduced sufficiently for surface flow to replace groundwater flow. Copyright © 2010 John Wiley & Sons, Ltd.     

The viscosity of hydrous dacitic liquids: implications for the rheology of evolving silicic magmas

The viscosity of a series of six synthetic dacitic liquids, containing up to 5.04 wt% dissolved water, was measured above the glass transition range by parallel-plate viscometry. The temperature of the 10¹¹ Pa s isokom decreases from 1065 K for the anhydrous liquid, to 864 K and 680 K for water contents of 0.97 and 5.04 wt% H₂O. Including additional measurements at high temperatures by concentric-cylinder and falling-sphere viscometry, the viscosity (η) can be expressed as a function of temperature and water content w according to: where η is in Pa s, T is temperature in K, and w is in weight percent. Within the conditions of measurement, this parameterization reproduces the 76 viscosity data with a root-mean square deviation (RMSD) of 0.16 log units in viscosity, or 7.8 K in temperature. The measurements show that water decreases the viscosity of the dacitic liquids more than for andesitic liquids, but less than for rhyolites. At low temperatures and high water contents, andesitic liquids are more viscous than the dacitic liquids, which are in turn more viscous than rhyolitic liquids, reversing the trend seen for high temperatures and low water contents. This suggests that the relative viscosity of different melts depends on temperature and water content as much as on bulk melt composition and structure. At magmatic temperatures, rhyolites are orders of magnitude more viscous than dacites, which are slightly more viscous than andesites. During degassing, all three liquids undergo a rapid viscosity increase at low water contents, and both dacitic and andesitic liquids will degas more efficiently than rhyolitic liquids. During cooling and differentiation, changing melt chemistry, decreasing temperature and increasing crystal content all lead to increases in the viscosity of magma (melt plus crystals). Under closed system conditions, where melt water content can increase during crystallization, viscosity increases may be small. Conversely, viscosity increases are very abrupt during ascent and degassing-induced crystallization.     

Large phreatomagmatic vent complex at Coombs Hills, Antarctica: Wet, explosive initiation of flood basalt volcanism in the Ferrar-Karoo LIP

The Mawson Formation and correlatives in the Transantarctic Mountains and South Africa record an early eruption episode related to the onset of Ferrar-Karoo flood basalt volcanism. Mawson Formation rocks at Coombs Hills comprise mainly (≥80% vol) structureless tuff breccia and coarse lapilli tuff cut by irregular dikes and sills, within a large vent complex (>30 km²). Quenched juvenile fragments of generally low but variable vesicularity, accretionary lapilli and country rock clasts within vent-fill, and pyroclastic density current deposits point to explosive interaction of basalt with groundwater in porous country rock and wet vent filling debris. Metre-scale dikes and pods of coherent basalt in places merge imperceptibly into peperite and then into surrounding breccia. Steeply dipping to sub-vertical depositional contacts juxtapose volcaniclastic rocks of contrasting componentry and grainsize. These sub-vertical tuff breccia zones are inferred to have formed when jets of debris + steam + water passed through unconsolidated vent-filling deposits. These jets of debris may have sometimes breached the surface to form subaerial tephra jets which fed subaerial pyroclastic density currents and fall deposits. Others, however, probably died out within vent fill before reaching the surface, allowing mixing and recycling of clasts which never reached the atmosphere. Most of the ejecta that did escape the debris-filled vents was rapidly recycled as vents broadened via lateral quarrying of country rock and bedded pyroclastic vent-rim deposits, which collapsed along the margins into individual vents. The unstratified, poorly sorted deposits comprising most of the complex are capped by tuff, lapilli tuff and tuff breccia beds inferred to have been deposited on the floor of the vent complex by pyroclastic density currents. Development of the extensive Coombs Hills vent-complex involved interaction of large volumes of magma and water. We infer that recycling of water, as well as recycling of pyroclasts, was important in maintaining water supply for phreatomagmatic interactions even when aquifer rock in the vent walls lay far from eruption sites as a consequence of vent-complex widening. The proportion of recycled water increased with vent-complex size in the same way that the proportion of recycled tephra did. Though water recycling leaves no direct rock record, the volcaniclastic deposits within the vent complex show through their lithofacies/structural architecture, lithofacies characteristics, and particle properties clear evidence for extensive and varied recycling of material as the complex evolved. Editorial responsibility: J. Donnelly-Nolan     

Anhydrous and water-saturated melting experiments of an olivine andesite from Mt Yakushi-Yama, northeastern Shikoku, Japan

Abstract Melting experiments have been carried out on an olivine andesite of Mt Yakushi-Yama from the Miocene Setouchi volcanic belt in northeastern Shikoku, Japan. This andesite has been characterized by a low ratio of FeO*/Mg° (= 0.78). Phase relations have been determined within the pressure range of 2.8 to 19.3 kbar at 1000-1300°C under anhydrous and water-saturated conditions. At pressures less than 8.8 kbar, olivine is a liquidus phase. Orthopyroxene appears on the liquidus at 9.3 kbar under the anhydrous conditions. The multiple saturation point rises up to 17.5 kbar for water-saturated experiments. The andesite melt coexists with olivine and orthopyroxene just below the liquidus at 8.8–9.3 kbar and 1230°C for dry conditions, and at 17.5 kbar and 1060°C under water-saturated conditions. These experimental results indicate that the Yakushi-Yama olivine andesite magma could coexist with a harzburgitic mantle at depths between about 30 and 60 km, and at temperatures between 1060 and 1230°C. Experimental data also suggest a possibility that a high magnesian andesite magma would be generated by a direct partial melting of the uppermost harzburgitic mantle under anhydrous conditions.     

Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.     

Propagation of P and S-waves in magmas with different crystal contents: Insights into the crystallinity of magmatic reservoirs

Increasing amount of crystals tends to reduce the mobility of magmas and modifies its elastic characteristics (e.g. [Caricchi, L. et al., 2007. Non-Newtonian rheology of crystal-bearing magmas and implications for magma ascent dynamics. Earth and Planetary Science Letters, 264: 402–419.; Bagdassarov, N., Dingwell, D.B. and Webb, S.L., 1994. Viscoelasticity of crystal- and bubble-bearing rhyolite melts. Physics of the Earth and Planetary Interior, 83: 83–99.]). To quantify the effect of crystals on the elastic properties of magmas the propagation speed of shear and compressional waves have been measured at pressure and temperatures relevant for natural magmatic reservoirs. The measurements have been performed in aggregates at variable particle fractions (? = 0–0.7). The measurements were carried out at 200 MPa confining pressure and temperatures between 300 K and 1273 K (i.e. across the glass transition temperature (Tg) from glass to melt). The specimens were mixtures of a haplogranitic melt containing 5.25 wt.% H₂O and variable amounts of sub-spherical alumina particles. Additional experiments were carried out on a sample containing both, crystals and air bubbles. The temperature derivatives of the shear (dVs/dT) and compressional wave (dVp/dT) velocities for pure glass and samples with a crystal fraction of 0.5 are different below and above the glass transition temperature. For a crystal fraction 0.7, only dVp/dT changed above the Tg. In the presence of gas bubbles, Vp and Vs decrease constantly with increasing temperature. The bubble-bearing material yields a lower bulk modulus relative to its shear modulus. The propagation velocities of compressional and shear waves increase non-linearly with increasing crystal fraction with a prominent raise in the range 0.5 < ? < 0.7. The speed variations are only marginally related to the density increase due to the presence of crystals, but are dominantly related to the achievement of a continuous crystal framework. The experimental data set presented here can be utilized to estimate the relative proportions of crystals and melt present in a magmatic reservoir, which, in turn, is one of the fundamental parameters determining the mobility of magma and, consequently, exerting a prime control on the likelihood of an eruption from a sub-surficial magma reservoir.     

Paleoposition of Southwest Japan at 16 Ma: Implication from paleomagnetism of the Miocene Ichishi Group

New paleomagnetic data from shallow-marine sediments of the Ichishi Group suggest a clockwise tectonic rotation of Southwest Japan in the Middle Miocene. Samples have been collected from mud or tuff layers at 17 sites. Stability of remanent magnetization has been examined by using alternating field and thermal demagnetization. The polarity sequence, composed of four normal and seven reversed polarity sites, is correlated to Polarity Epoch 16 (15.2–17.6 Ma), based on micropaleontological assignment of the upper Ichishi Group to Blow's Zone N8. The mean paleomagnetic direction of the 11 sites shows an anomalous declination toward the northeast. This result suggests that Southwest Japan was subjected to a clockwise rotation through 45° since 16 Ma. The clockwise rotation can be explained by the drift of Southwest Japan associated with the spreading of the Japan Sea during the Middle Miocene.