Metamorphic history of high-pressure granulites in Payer Land, Greenland Caledonides

A high‐P granulite facies gneiss complex occurs in north‐west Payer Land (74°28′?74°47′N) in the central part of the East Greenland Caledonian (Ordovician–Devonian) orogen. High‐P metamorphism of the Payer Land gneiss complex resulted in formation of the assemblages Grt + Cpx + Amp + Qtz + Ru ± Pl in mafic rocks, and Grt + Ol + Cpx + Opx + Spl in rare ultramafic pods. Associated metapelites experienced anatexis in the kyanite stability field. Peak metamorphic assemblages formed around 800–850 °C at pressures of c. 1.4–1.7 GPa, corresponding to crustal depths of c. 50 km. Mafic granulites contain abundant reaction textures, including the replacement of garnet by symplectites of Opx + Spl + Pl, indicating that the high‐P event was followed by decompression while the granulites remained at elevated temperatures. Charnockitic gneisses from Payer Land show evidence of late Archean (c. 2.8–2.4 Ga) crustal growth and subsequent Palaeoproterozoic (c. 1.85 Ga) metamorphism. The gneiss complex experienced intense reworking during the Caledonian continental collision. On the basis of Caledonian monazite ages recorded from the high‐P anatectic metapelites, the clockwise P–T evolution and formation of the high‐P granulite facies assemblages is related to Caledonian crustal thickening, which resulted in formation of eclogites approximately 300 km north of Payer Land. The Payer Land granulites comprise a metamorphic core complex, which is separated from the overlying low‐grade supracrustal rocks (the Neoproterozoic Eleonore Bay Supergroup) by a late Caledonian extensional fault zone, the Payer Land Detachment. The steep, nearly isothermal, unloading P–T path recorded by the granulites can be explained by erosional and tectonic unroofing along the Payer Land Detachment.     

Pro- and retrograde P–T evolution of granulites of the Beit Bridge Complex (Limpopo Belt, South Africa): constraints from quantitative phase diagrams and geotectonic implications

Interpretations based on quantitative phase diagrams in the system CaO–Na₂O–K₂O–TiO₂–MnO–FeO–MgO–Al₂O₃–SiO₂–H₂O indicate that mineral assemblages, zonations and microstructures observed in migmatitic rocks from the Beit Bridge Complex (Messina area, Limpopo Belt) formed along a clockwise P–T path. That path displays a prograde P–T increase from 600 °C/7.0 kbar to 780 °C/9–10 kbar (pressure peak) and 820 °C/8 kbar (thermal peak), followed by a P–T decrease to 600 °C/4 kbar. The data used to construct the P–T path were derived from three samples of migmatitic gneiss from a restricted area, each of which has a distinct bulk composition: (1) a K, Al‐rich garnet–biotite–cordierite–sillimanite–K‐feldspar–plagioclase–quartz–graphite gneiss (2) a K‐poor, Al‐rich garnet–biotite–staurolite–cordierite–kyanite–sillimanite–plagioclase–quartz–rutile gneiss, and (3) a K, Al‐poor, Fe‐rich garnet–orthopyroxene–biotite–chlorite–plagioclase–quartz–rutile–ilmenite gneiss. Preservation of continuous prograde garnet growth zonation demonstrates that the pro‐ and retrograde P–T evolution of the gneisses must have been rapid, occurring during a single orogenic cycle. These petrological findings in combination with existing geochronological and structural data show that granulite facies metamorphism of the Beit Bridge metasedimentary rocks resulted from an orogenic event during the Palaeoproterozoic (c. 2.0 Ga), caused by oblique collision between the Kaapvaal and Zimbabwe Cratons. Abbreviations follow Kretz (1983 ).     

P–T–X relationships in the Precambrian Al–Mg-rich granulites from In Ouzzal, Hoggar, Algeria

The Al–Mg-rich granulites from the In Ouzzal craton, Algeria, show a great diversity of mineral reactions which correspond to continuous equilibria as predicted by phase relationships in the FeO–MgO–Al₂O₃–SiO₂ system. The sequence of mineral reactions can be subdivided into three distinct stages: (1) a high-P stage characterized by the growth of coarse mineral assemblages involving sapphirine and the disappearance of early corundum and spinel-bearing assemblages; (2) a high-T stage characterized by the development of Sa–Qz-bearing assemblages; and (3) a later stage, in which garnet-bearing assemblages are replaced by more or less fine symplectites involving cordierite. During the course of early mineral reactions, the distribution coefficient, K_d, between the various ferromagnesian phases decreased significantly whereas Al₂O₃ in pyroxene increased concomitantly. These observations, when combined with topological constraints, clearly indicate that the high-P stage 1 was accompanied by a significant rise in temperature (estimated at 150 ± 50° C) under near isobaric conditions, in agreement with the reaction textures. By stage 2, pressure and temperature were extreme as evidenced by the low K_d value between orthopyroxene and garnet (K_d= 2.06–1.99), the high alumina content in pyroxene (up to 11.8%) and the high magnesium content in garnet [100 Mg/(Mg + Fe) = 60.6]. Mineral thermometry based on Fe–Mg exchange between garnet and pyroxene and on Al-solubility in pyroxene gives temperatures close to 970 ± 70° C at 10 ± 1.5 kbar. These results are in agreement with the development of Sa–Qz assemblages on a local scale. Late mineral reactions have been produced during a decompression stage from about 9 to 6 kbar. Except for local re-equilibration of Mg and Fe at grain boundaries, there is no evidence for further reactions below 700° C. We interpreted the whole set of mineral reactions as due to changes in pressure and temperature during a tectonic episode located at c. 2 Ga. Because of the lack of evidence for further uplift after the thermal relaxation which occurred at c. 6 kbar, it is possible however that the exhumation of this granulitic terrane occurred in a later tectonic event unrelated to its formation.     

Crustal trajectory of sapphirine-bearing granulites from Ganguvarpatti, South India: evidence for an isothermal decompression path

Abstract Ganguvarpatti is part of a Precambrian terrane characterized by granulite facies rocks, including charnockites, mafic granulites, sapphirine-bearing granulites, leptynites and gneisses. A sequence of reactions deduced from the multiphase reaction textures provide information on the metamorphic history of this area, as they formed in response to decompression during uplift. Geothermobarometry and constraints from reaction textures define a segment of a P–T path traversed by the granulites of Ganguvarpatti. Near-peak metamorphic conditions of c. 800°C and 8 kbar were succeeded by a symplectitic stage at a significantly lower pressure ( c. 700°C and 4.5 kbar), documenting a nearly isothermal decompression P–T path and rapid uplift ( c. 12 km) followed by cooling. The presence of many fluid inclusions of extremely low density in the charnockites is consistent with a nearly isothermal uplift path. Attainment of a maximum pressure of c. 8 kbar indicates c. 27 km depth of burial during metamorphism. This would imply a total crustal thickness of c. 65–70 km at 2.6–2.5 Ga. Such a profound crustal thickness and a clockwise decompressive P–T path is interpreted as a consequence of tectonic thickening of crust, accomplished by collision tectonics of the southern granulite terrane against the Dharwar craton along the Palghat–Cauvery shear zone via northward subduction.     

A decompressional P–T path, Reinbolt Hills, East Antarctica

Granulites exposed in the Reinbolt Hills, East Antarctica, are part of the extensive Late Proterozoic granulite complex of East Antarctica, which includes the Rauer Group to the east and the northern Prince Charles Mountains to the west. The deformation history includes three pervasive deformation phases. No chemical or mineralogical distinction between these phases has been detected and this is interpreted to be the result of complete re-equilibration at the end of the third deformation phase. Two late deformation phases post-date the metamorphism and record a medium-temperature cooling path. A short segment of the P–T path of these rocks was inferred from mineral reactions that occurred during these late deformation phases. The path passes from 800°C, 7 kbar to 690°C, 5 kbar, indicating strong decompression, which is typical of a thrust-dominated crustal thickening followed by rapid erosion or extensional collapse.     

Metamorphic textures and P–T evolution of high-P granulites from the Lelukuau terrane, NE Grenville Province

High‐pressure (HP) granulites and eclogitized metagabbro are exposed along an orogen‐parallel high‐P belt that was developed at c. 1050–1020 Ma in the NE Grenville Province. Among these rocks, mafic granulites derived from a Labradorian anorthosite suite of the Lelukuau terrane contain garnet, Al‐Na diopside, and, depending on bulk composition, plagioclase and kyanite. Moreover, the distribution of phases is influenced by the original igneous texture. For instance, in high X_MgO leucocratic varieties, garnet porphyroblasts nucleated together with kyanite in An‐rich cores of plagioclase domains whereas in low X_MgO rocks garnet occurs together with clinopyroxene within formerly igneous ferromagnesian domains and kyanite is missing. In contrast, garnet pseudomorphs after igneous plagioclase in melanocratic varieties display evidence of earlier corona development. Metamorphic textures are consistent with a two stage evolution: (a) development of garnet and Al‐Na‐diopside (Cpx₁) under high‐P metamorphic conditions, concomitant with elimination of plagioclase in the mesocratic to melanocratic varieties; and (b) partial loss of Al‐Na from Cpx₁ resulting in production of new andesitic plagioclase, and growth of new clinopyroxene (Cpx₂) after garnet and quartz in leucocratic to mesocratic rocks consistent with decompression. Widespread equilibrium textures between garnet‐Pl₂‐Cpx₂ and/or reset Cpx₁ are consistent with development at the thermal peak. Estimated P–T conditions for the presumed thermal peak fall in the range 1500–1800 MPa and 800–900 °C and are comparable to those recorded by eclogitized gabbros from other parts of the high‐P belt of the NE Grenville province. Low jadeite content of clinopyroxene from the HP granulites is attributed to the low bulk Na₂O/(Na₂O + CaO) of these rocks relative to common basaltic compositions. Scarcity of apparent retrograde textural overprint in both the HP granulites and the eclogites suggests fast subsequent cooling, consistent with extrusion of the high‐P belt towards the foreland shortly after the metamorphic peak.     

The metamorphic evolution of metapelitic granulites from Radok Lake, northern Prince Charles Mountains, east Antarctica; evidence for an anticlockwise P–T path

Mineral textures in metapelitic granulites from the northern Prince Charles Mountains, coupled with thermodynamic modelling in the K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (KFMASHTO) model system, point to pressure increasing with increasing temperature on the prograde metamorphic path, followed by retrograde cooling (i.e. an anticlockwise P–T path). Textural evidence for the increasing temperature part of the path is given by the breakdown of garnet and biotite to form orthopyroxene and cordierite in sillimanite‐absent rocks, and through the break‐down of biotite and sillimanite to form spinel, cordierite and garnet in more aluminous assemblages. This is equated to the advective addition of heat from the regional emplacement of granitic and charnockitic magmas dated at c. 980 Ma. A subsequent increase in pressure, inferred from the break‐down of spinel and quartz to sillimanite, cordierite and garnet in aluminous rocks, is attributed to crustal thickening related to upright folding dated at 940–910 Ma. The terrane attained peak metamorphic temperatures of c. 880 °C at pressures of c. 6.0–6.5 kbar during this event. Subsequent cooling is inferred from the localised breakdown of cordierite and garnet to form biotite and sillimanite that developed in the latter stages of the same event. The textural observations described are interpreted via the application of P–T and P–T–X pseudosections. The latter show that most rock compositions preserve only fragments of the overall P–T path; a result of different rock compositions undergoing mineral assemblage changes, or changes in mineral modal abundance, on different sections of the P–T path. The results also suggest that partial melting during granulite facies metamorphism, coupled with melt loss and dehydration, initiated a switch from pervasive ductile, to discrete ductile/brittle deformation, during retrograde cooling.     

Pressure–temperature–time evolution of the Central East Greenland Caledonides: quantitative constraints on crustal thickening and synorogenic extension

Whereas geologists have known for three‐quarters of a century that there was significant crustal thickening in the central East Greenland Caledonides, the crucial role of extensional faulting during Caledonian orogenesis has only been recognized during the past decade. In this paper, new petrographic and thermobarometric observations are presented from migmatitic metasedimentary gneisses of the Forsblad Fjord region (c. 72.5°N). Samples of the Krummedal Sequence, collected from the footwall of the upper of two significant splays of the main extensional fault system in the region—the Fjord Region Detachment (FRD)—enable us to establish a relative sequence of metamorphism. Our pressure (P)–temperature (T) results imply a clockwise loop in P–T space. As recorded by mineral assemblages in the Krummedal gneisses, prograde metamorphism involved a net increase of c. 4 kbar and 250 °C, with peak conditions of c. 10.5 kbar at 785 °C. Early burial and heating was followed by near‐isothermal decompression of 4.5 kbar, a process which is attributed to roughly 18 km of tectonostratigraphic throw on the upper splay of the FRD. Combining data reported here with the published data, it is estimated that the approximate tectonostratigraphic throw along the lower splay of the FRD was c. 16 km. In situ U–Th–Pb‐monazite electron microprobe dating suggests that the earliest phase of metamorphism recorded in the Krummedal Sequence gneisses of Forsblad Fjord occurred during the Caledonian orogeny. Furthermore, the combination of our new data with existing conventional TIMS U‐Pb and ⁴⁰Ar/³⁹Ar data imply that: (1) movement along the uppermost splay of the FRD (c. 425–423 Ma) occurred at maximum time‐averaged slip‐rates equivalent to c. 9 mm of vertical displacement per year; and (2) that the final stages of metamorphism occurred prior to c. 411 Ma, although part of this denudation was likely accommodated on overlying extensional structures that may have been active more recently. There is close agreement between our data and results from the Krummedal Sequence north of the field area (72.5°?74°N), and rocks of the Smallefjord Sequence (75°?76°N) that are suggested to correlate with the Krummedal Sequence. This leads us to infer that the events recorded in the Forsblad Fjord region are of orogen‐scale significance.     

Petrology and P–T path of the Fuping mafic granulites: implications for tectonic evolution of the central zone of the North China craton

The Fuping Complex and the adjoining Wutai and Hengshan Complexes are located in the central zone of the North China craton. The dominant rock types in the Fuping Complex are high‐grade tonalitic–trondhjemitic–granodioritic (TTG) gneisses, with minor amounts of mafic granulites, syntectonic granitic rocks and supracrustal rocks. The petrological evidence from the mafic granulites indicates three stages of metamorphic evolution. The M₁ stage is represented by garnet porphyroblasts and matrix plagioclase, quartz, orthopyroxene, clinopyroxene and hornblende. Orthopyroxene+plagioclase symplectites and clinopyroxene+plagioclase±orthopyroxene coronas formed in response to decompression during M₂ following the peak metamorphism at M₁. Hornblende+plagioclase symplectites formed as a result of further isobaric cooling and retrograde metamorphism during M₃. The P–T estimates using TWQ thermobarometry are: 900–950 °C and 8.0–8.5 kbar for the peak assemblage (M₁), based on the core compositions of garnet, matrix pyroxene and plagioclase; 700–800 °C and 6.0–7.0 kbar for the pyroxene+plagioclase symplectites or coronas (M₂); and 550–650 °C and 5.3–6.3 kbar for the hornblende+plagioclase symplectites (M₃), based on garnet rim and corresponding symplectic mineral compositions. These P–T estimates define a clockwise P–T path involving near‐isothermal decompression for the Fuping Complex, similar to the P–T path estimated for the metapelitic gneisses. The inferred P–T path suggests that the Fuping Complex underwent initial crustal thickening, subsequent exhumation, and finally cooling and retrogression. This tectonothermal path is similar to P–T paths inferred for the Wutai and Hengshan Complexes and other tectonic units in the central zone of the North China craton, but different from anti‐clockwise P–T paths estimated for the basement rocks in the eastern and western zones of the craton. Based on lithological, structural, metamorphic and geochronological data, the eastern and western zones of the craton are considered to represent two different Archean to Paleoproterozoic continental blocks that amalgamated along the central zone at the end of Paleoproterozoic. The P–T paths of the Fuping Complex and other tectonic units in the central zone record the collision between the eastern and western zones that led to the final assembly of the North China craton at c. 1800 Ma.     

Reaction textures in calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica: implications for the retrograde P–T path

Calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica, exhibit a sequence of reaction textures that have been used to elucidate their retrograde P–T path. The highest temperature recorded in the calc-silicates is represented by the wollastonite- and scapolite-bearing assemblages which yield at least 760°C at 6 kbar based on experimental results. The calc-silicates have partially re-equilibrated at lower temperatures (down to 450°C) as evidenced by the successive reactions: (1) wollastonite + scapolite + calcite = garnet + CO₂, (2) wollastonite + CO₂= calcite + quartz, (3) wollastonite + plagioclase = garnet + quartz, (4) scapolite = plagioclase + calcite + quartz, (5) garnet + CO₂+ H₂O = epidote + calcite + quartz, and (6) clinopyroxene + CO₂+ H₂O = tremolite + calcite + quartz.
The reaction sequence observed indicates that a CO₂ was relatively low in the wollastonite-bearing rocks during peak metamorphic conditions, and may have been further lowered by local infiltration of H₂O from the surrounding migmatitic gneisses on cooling. Fluid activities in the Bolingen calc-silicates were probably locally variable during the granulite facies metamorphism, and large-scale CO₂ advection did not occur.
A retrograde P–T path, from the sillimanite stability field ( c. 760°C at 6 kbar) into the andalusite stability field ( c. 450°C at <3 kbar), is suggested by the occurrence of secondary andalusite in an adjacent cordierite–sillimanite gneiss in which sillimanite occurs as inclusions in cordierite.     

Crustal thickening and ductile extension in the NE Greenland Caledonides: a metamorphic record from anatectic pelites

Caledonian orogenesis in NE Greenland resulted from the collision of Laurentia and Baltica during the Ordovician–Silurian. Anatectic pelites within the metasedimentary Smallefjord Sequence record a clockwise P – T  path, the result of early crustal thickening at c . 445–440 Ma and subsequent exhumation of the high-grade metamorphic core by a combination of ductile extension and tectonic denudation. The early prograde segment of the path followed a shallow, near-isothermal trajectory and attained a metamorphic peak of c . 9.0–10.0 kbar at >790 and <850 °C. Prograde metamorphism initiated anatexis of pelites in the kyanite stability field and continued with sillimanite stable. Inclusion trails in the garnet cores are textural remnants of early deformation, which occurred either before or during prograde metamorphism. The peak metamorphic conditions are anomalously high in the context of thermal models and P – T  paths for continental collision zones. The additional heat input required to promote migmatization may have been provided by advection as lower crustal high-pressure rocks and the uppermost mantle were uplifted following lithospheric thinning at an early stage in the orogeny. The prograde path was interrupted by the development of retrograde extensional shear fabrics defined by biotite+sillimanite and associated with garnet breakdown. Field observations indicate that ductile extension was accompanied by melt extraction, transport and emplacement of intracrustal granites dated at c . 430 Ma. Regional ductile extension and exhumation probably resulted from the development of gravitational instabilities within the overthickened crust during continental collision.     

P–T conditions of decompression of the Limpopo high-grade terrane: record from shear zones

The Southern Marginal Zone of the late Archean Limpopo Belt of southern Africa is an example of a high‐grade gneiss terrane in which both upper and lower crustal deformational processes can be studied. This marginal zone consists of large thrust sheets of complexly folded low‐strain gneisses, bound by an imbricate system of kilometre‐wide deep crustal shear zones characterized by the presence of high‐strain gneisses (‘primary straight gneisses’). These shear zones developed during the decompression stage of this high‐grade terrane. Low‐ and high‐strain gneisses both contain similar reaction textures that formed under different kinematic conditions during decompression. Evidence for the early M1/D1 metamorphic phase (> 2690 Ma) is rarely preserved in low‐strain gneisses as a uniform orientation of relict Al‐rich orthopyroxene in the matrix and quartz and plagioclase inclusions in the cores of early (M1) Mg‐rich garnet porphyroblasts. This rare fabric formed at > 820 °C and > 7.5 kbar. The retrograde M2/D2 metamorphic fabric (2630–2670 Ma) is well developed in high‐strain gneisses from deep crustal shear zones and is microscopically recognized by the presence of reaction textures that formed synkinematically during shear deformation: M2 sigmoid‐shaped reaction textures with oriented cordierite–orthopyroxene symplectites formed after the early M1 Mg‐rich garnet porphyroblasts, and syn‐decompression M2 pencil‐shaped garnet with oriented inclusions of sillimanite and quartz formed after cordierite under conditions of near‐isobaric cooling at 750–630 °C and 6–5 kbar. The symplectites and pencil‐shaped garnet are oriented parallel to the shear fabric and in the stretching direction. Low‐strain gneisses from thrust sheets show similar M2 decompression cooling and near‐isobaric cooling reaction textures that formed within the same P–T range, but under low‐strain conditions, as shown by their pseudo‐idioblastic shapes that reflect the contours of completely replaced M1 garnet and randomly oriented cordierite–orthopyroxene symplectites. The presence of similar reaction textures reflecting low‐strain conditions in gneisses from thrust sheets and high‐strain conditions in primary straight gneisses suggests that most of the strain during decompression was partitioned into the bounding shear zones. A younger M3/D3 mylonitic fabric (< 2637 Ma) in unhydrated mylonites is characterized by brittle deformation of garnet porphyroclasts and ductile deformation of the quartz–plagioclase–biotite matrix developed at < 600 °C, as the result of post‐decompression shearing under epidote–amphibolite facies conditions.     

The retrograde P–T–t path for low-pressure granulites from the Reynolds Range, central Australia: petrological constraints and implications for low-P/high-T metamorphism

Several aspects of the petrogenesis of low-pressure granulite facies rocks from the Reynolds Range (central Australia) are contentious, including: (a) the shape of the retrograde P–T –time path, and whether it is an artefact of repeated thermal events at different P–T conditions; (b) the type of regional metamorphism; and (c) the causes of metamorphism. Granulite facies rocks from the Reynolds Range Group experienced three major periods of mineralogical equilibration. Metapelitic rocks underwent dehydration-melting reactions to form migmatites under peak M2 P–T conditions of c. 5.0–5.3 kbar and c. 750–800 °C. Metapsammitic rocks that did not melt during M2 show spectacular garnet–orthopyroxene intergrowths that developed at c. 3.5–3.7 kbar and c. 700–750 °C after penetrative regional deformation, but prior to amphibolite facies rehydration in discrete strike-parallel zones. Rehydration occurred within the sillimanite stability field at P–T conditions close to the granite solidus (c. 3.2–3.4 kbar and 650–700 °C). Subsequently the terrane cooled into the andalusite stability field. Geochronological constraints suggest that: (a) peak-M2 conditions were reached at c. 1594 Ma; (b) the garnet–orthopyroxene intergrowths in unmelted metapsammites probably developed between c. 1594 Ma and c. 1586 Ma; and (c) upper amphibolite facies rehydration occurred between c. 1586 Ma and 1568 Ma. The lack of petrological evidence for multiple dehydration and rehydration of the rocks suggests that the three episodes of mineralogical recrystallization can be linked to yield a single continuous retrograde P–T–t path of minor initial decompression (c. 1.5 kbar) from the M2 peak, followed by cooling (c. 100 °C) to the granite solidus over a period of c. 26 Ma. Late kyanite-bearing shear zones that dissect the terrane are unrelated to this event and formed during the c. 300–400 Ma Alice Springs Orogeny. The shape of the P–T–t path and the duration of M2 metamorphism suggests that advective heating was not the major cause of high-grade metamorphism, and that some other, longer lived heat source, such as the burial of anomalously radiogenic, pre-tectonic granites, is required.     

Two-stage decompression in orthopyroxene–sillimanite granulites from Forefinger Point, Enderby Land, Antarctica: implications for the evolution of the Archaean Napier Complex

Magnesian metapelites of probable Archaean age from Forefinger Point, SW Enderby Land, East Antarctica, contain very-high-temperature granulite facies mineral assemblages, which include orthopyroxene (8–9.5 wt% Al₂O₃)–sillimanite ± garnet ± quartz ± K-feldspar, that formed at 10 ± 1.5 kbar and 950 ± 50°C. These assemblages are overprinted by symplectite and corona reaction textures involving sapphirine, orthopyroxene (6–7 wt% Al₂O₃), cordierite and sometimes spinel at the expense of porphyroblastic garnet or earlier orthopyroxene–sillimanite. These textures mainly pre-date the development of coarse biotite at the expense of initial mesoperthite, and the subsequent formation of orthopyroxene (4–6 wt% Al₂O₃)–cordierite–plagioclase rinds on late biotite.
The early reaction textures indicate a period of near-isothermal decompression at temperatures above 900°C. Decompression from 10 ± 1.5 kbar to 7–8 kbar was succeeded by biotite formation at significantly lower temperatures (800–850°C) and further decompression to 4.5 ± 1 kbar at 700–800°C.
The later parts of this P–T evolution can be ascribed to the overprinting and reworking of the Forefinger Point granulites by the Late-Proterozoic ( c . 1000 Ma) Rayner Complex metamorphism, but the age and timing of the early high-temperature decompression is not known. It is speculated that this initial decompression is of Archaean age and therefore records thinning of the crust of the Napier Complex following crustal thickening by tectonic or magmatic mechanisms and preceding the generally wellpreserved post-deformational near-isobaric cooling history of this terrain.     

Inference of a detailed P–T path from P–T pseudosections using metapelitic rocks of variable composition from a single outcrop, Shackleton Range, Antarctica

Generally, P–T pseudosections for reduced compositional systems, such as K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, Na₂O–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O and MnO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, are well suited for inferring detailed P–T paths, comparing mineral assemblages observed in natural rocks with those calculated. Examples are provided by P–T paths inferred for four metapelitic samples from a 1 m² wide outcrop of the Herbert Mountains in the Shackleton Range, Antarctica. The method works well if the bulk composition used is reconstituted from average mineral modes and mineral compositions (AMC) or when X‐ray fluorescence (XRF) data are corrected for Al₂O₃ and FeO. A plagioclase correction is suitable for Al₂O₃. Correction for FeO is dependent on additional microscopic observations, e.g. the kind and amount of opaque minerals. In some cases, all iron can be treated as FeO^tot, whereas in others a magnetite or hematite correction yields much better results. Comparison between calculated and observed mineral modes and mineral compositions shows that the AMC bulk composition is best suited to the interpretation of rock textures using P–T pseudosections, whereas corrected XRF data yield good results only when the investigated sample has few opaque minerals. The results indicate that metapelitic rocks from the Herbert Mountains of the Northern Shackleton Range underwent a prograde P–T evolution from about 600 °C/5.5 kbar to 660 °C/7 kbar, followed by nearly adiabatic cooling to about 600 °C at 4.5 kbar.     

High-pressure granulites in the Sanggan area, North China craton: metamorphic evolution, P–T paths and geotectonic significance

High‐pressure basic granulites are widely distributed as enclaves and sheet‐like blocks in the Huaian TTG gneiss terrane in the Sanggan area of the Central Zone of the North China craton. Four stages of the metamorphic history have been recognised in mineral assemblages based on inclusion, exsolution and reaction textures integrated with garnet zonation patterns as revealed by compositional maps and compositional profiles. The P–T conditions for each metamorphic stage were obtained using thermodynamically and experimentally calibrated geothermobarometers. The low‐Ca core of growth‐zoned garnet, along with inclusion minerals, defines a prograde assemblage (M1) of garnet + clinopyroxene + plagioclase + quartz, yielding 700 °C and 10 kbar. The peak of metamorphism at about 750–870 °C and 11–14.5 kbar (M2) is defined by high‐Ca domains in garnet interiors and inclusion minerals of clinopyroxene, plagioclase and quartz. Kelyphites or coronas of orthopyroxene + plagioclase ± magnetite around garnet porphyroblasts indicate garnet breakdown reactions (M3) at conditions around 770–830 °C and 8.5–10.5 kbar. Garnet exsolution lamellae in clinopyroxene and kelyphites of amphibole + plagioclase around garnet formed during the cooling process at about 500–650 °C and 5.5–8 kbar (M4). These results help define a sequential P–T path containing prograde, near‐isothermal decompression (ITD) and near‐isobaric cooling (IBC) stages. The clockwise hybrid ITD and IBC P–T paths of the HP granulites in the Sanggan area imply a model of thickening followed by extension in a collisional environment. Furthermore, the relatively high‐pressures (6–14.5 kbar) of the four metamorphic stages and the geometry of the P–T paths suggest that the HP granulites, together with their host Huaian TTG gneisses, represent the lower plate in a crust thickened during collision. The corresponding upper‐plate might be the tectonically overlying Khondalite series, which was subjected to medium‐ to low‐pressure (MP/LP: 7–4 kbar) granulite facies metamorphism with a clockwise P–T path including an ITD segment. Both the HP and the MP/LP granulite facies events occurred contemporaneously at c. 1.90–1.85 Ga in a collisional environment created by the assembly process of the North China craton.     

P–T path of high-pressure/low-temperature rocks and tectonic implications in the western Tianshan Mountains, NW China

The Chinese western Tianshan high-pressure/low-temperature (HP–LT) metamorphic belt, which extends for about 200 km along the South Central Tianshan suture zone, is composed of mainly metabasic blueschists, eclogites and greenschist facies rocks. The metabasic blueschists occur as small discrete blocks, lenses, bands, laminae or thick beds in meta-sedimentary greenschist facies country rocks. Eclogites are intercalated within blueschist layers as lenses, laminae, thick beds or large massive blocks (up to 2 km² in plan view). Metabasic blueschists consist of mainly garnet, sodic amphibole, phengite, paragonite, clinozoisite, epidote, chlorite, albite, accessory titanite and ilmenite. Eclogites are predominantly composed of garnet, omphacite, sodic–calcic amphibole, clinozoisite, phengite, paragonite, quartz with accessory minerals such as rutile, titanite, ilmenite, calcite and apatite. Garnet in eclogite has a composition of 53–79 mol% almandine, 8.5–30 mol% grossular, 5–24 mol% pyrope and 0.6–13 mol% spessartine. Garnet in blueschists shows similar composition. Sodic amphiboles include glaucophane, ferro-glaucophane and crossite, whereas the sodic–calcic amphiboles mainly comprise barroisite and winchite. The jadeite content of omphacite varies from 35–54 mol%. Peak eclogite facies temperatures are estimated as 480–580 °C for a pressure range of 14–21 kbar. The conditions of pre-peak, epidote–blueschist facies metamorphism are estimated to be 350–450 °C and 8–12 kbar. All rock types have experienced a clockwise P–T path through pre-peak lawsonite/epidote-blueschist to eclogite facies conditions. The retrograde part of the P–T path is represented by the transition of epidote-blueschist to greenschist facies conditions. The P–T path indicates that the high-pressure rocks formed in a B-type subduction zone along the northern margin of the Palaeozoic South Tianshan ocean between the Tarim and Yili-central Tianshan plates.     

P–T conditions for the Arendal granulites, southern Norway: implications for the roles of P, T and CO2 in deep crustal LILE-depletion

Abstract The orthopyroxene-clinopyroxene, garnet-orthopyroxene and garnet-clinopyroxene geothermometers, and the garnet-orthopyroxene-plagioclase, garnet-clinopyroxene-plagioclase and anorthite-ferrosilite-grossular-almandine-quartz geobarometers are applied to metabasites and the garnetplagioclase-sillimanite-quartz geobarometer is applied to a metapelite from the Proterozoic Arendal granulite terrain, Bamble sector, Norway. P–T conditions of metamorphism were 7.3 ± 0.5 kbar and 800 ± 60°C.
This terrain shows a regional gradation from the amphibolite facies, into normal LILE content granulite facies rocks and finally strongly LILE deficient granulite facies gneisses. Neither P nor T vary significantly across the entire transition zone. The change in 'grade'parallels the increasing dominance of CO₂ over H₂O in the fluid phase.
LILE-depletion is not a pre-condition of granulite facies metamorphism: granulites may have either 'depleted'or 'normal'chemistries. The results presented herein show that LILE-deficiency in granulite facies orthogneisses is not necessarily related to variations in either P or T . The important mechanisms in the Arendal terrain were (a) direct synmetamorphic crystallization from magma, with primary LILE-poor mineralogies imposed by the prevailing fluid regime, and (b) metamorphic depletion, involving scavenging of LILEs during flushing by mantle-derived CO₂-rich fluids. The latter process is constrained by U–Pb and Rb–Sr isotopic work to have occurred no later than 50 Ma after intrusion of the acid-intermediate gneisses, and was probably associated with contemporary basic magmatism in a tectonic environment similar to a present day cordilleran continental margin.     

P–T evolution of glaucophane–omphacite bearing HP–LT rocks in the western Tianshan Orogen, NW China:new evidence for 'Alpine-type' tectonics

The late Palaeozoic western Tianshan high‐pressure /low‐temperature belt extends for about 200 km along the south‐central Tianshan suture zone and is composed mainly of blueschist, eclogite and epidote amphibolite/greenschist facies rocks. P–T conditions of mafic garnet omphacite and garnet–omphacite blueschist, which are interlayered with eclogite, were investigated in order to establish an exhumation path for these high‐pressure rocks. Maximum pressure conditions are represented by the assemblage garnet–omphacite–paragonite–phengite–glaucophane–quartz–rutile. Estimated maximum pressures range between 18 and 21 kbar at temperatures between 490 and 570 °C. Decompression caused the destabilization of omphacite, garnet and glaucophane to albite, Ca‐amphibole and chlorite. The post‐eclogite facies metamorphic conditions between 9 and 14 kbar at 480–570 °C suggest an almost isothermal decompression from eclogite to epidote–amphibolite facies conditions. Prograde growth zoning and mineral inclusions in garnet as well as post‐eclogite facies conditions are evidence for a clockwise P–T path. Analysis of phase diagrams constrains the P–T path to more or less isothermal cooling which is well corroborated by the results of geothermobarometry and mineral textures. This implies that the high‐pressure rocks from the western Tianshan Orogen formed in a tectonic regime similar to ‘Alpine‐type’ tectonics. This contradicts previous models which favour ‘Franciscan‐type’ tectonics for the southern Tianshan high‐pressure rocks.     

Prograde, peak, and retrograde P–T paths from aluminium in orthopyroxene: High-temperature contact metamorphism in the aureole of the Makhavinekh Lake Pluton, Nain Plutonic Suite, Labrador

Static heating during intrusion of the Makhavinekh Lake Pluton (MLP) caused replacement of garnet in the adjacent country rocks (Tasiuyak Gneiss) by coronal assemblages of orthopyroxene + cordierite. Thermometry based on Al solubility in orthopyroxene, applied to relict garnet and neighbouring orthopyroxene, preserves a temperature gradient from 700 to 900 °C at distances between 5750 and 20 m from the intrusion, reaffirming the robustness of this thermometry technique. Intracrystalline and intergranular variations of Al zoning in orthopyroxene are well‐preserved, suggesting that little diffusional modification of Al growth zoning occurred. Maximum Al₂O₃ in orthopyroxene ranges from c. 2.0 wt% at 5750 m from the intrusion to a maximum of 4.3 wt% at the contact. Individual orthopyroxene grains show decreasing Al from core to rim in samples < 500 m from the intrusion, while those at greater distances show an increase from core to rim. These features are interpreted with the aid of numerical models for conductive heat flow in the aureole. Coronas in samples close to the intrusion grew at high temperatures and along T‐t paths dominated by cooling, so maximum Al content in orthopyroxene in these samples occurs in the cores of grains that grew during the earliest stages of garnet consumption. In contrast, the corona‐forming reactions in rocks further from the contact proceeded along prograde heating paths, so maximum Al content in orthopyroxene occurs in the rims of grains that grew during the final stages of garnet consumption. These results document the ability of Al‐in‐orthopyroxene thermometry to preserve a detailed record of thermal histories in contact‐metamorphic granulites; they suggest that similar intracrystalline and intergranular variations of Al zoning in orthopyroxene in regional granulites may also preserve portions of both the prograde and peak‐T evolution.