共查询到20条相似文献,搜索用时 625 毫秒
1.
2.
Development and experiments of the Sea-Wing underwater glider 总被引:1,自引:0,他引:1
Underwater gliders,which glide through water columns by use of a pair of wings,are efficient long-distance,long-duration marine environment observatory platforms.The Sea-Wing underwater glider,developed by the Shenyang Institute of Automation,CAS,is designed for the application of deep-sea environment variables observation.The system components,the mechanical design,and the control system design of the Sea-Wing underwater glider are described in this paper.The pitch and roll adjusting models are derived based on the mechanical design,and the adjusting capabilities for the pitch and roll are analyzed according to the models.Field experiments have been carried out for validating the gliding motion and the ability of measuring ocean environment variables.Experimental results of the motion performances of the glider are presented. 相似文献
3.
Underwater glider is an autonomous underwater vehicle that glides by controlling their buoyancy and attitude using internal actuators. By changing the vehicle's buoyancy intermittently, vertical motion can be achieved. Characteristics of glider motion include upward and downward movement in a saw tooth pattern, turning and gliding in a vertical spiral motion and gliding without using thrusters or propellers. This paper presents the modelling and identification on net buoyancy, depth and pitching angle of an underwater glider system. A ballast tank subsystem is considered appropriate for the identification process since it is the main parameter for the motion control. By selecting the ballast rate as the input, three aspects of the dynamics of a glider can be observed: buoyancy, depth of the glider and pitching angle. The MATLAB System Identification ToolboxTM is used to obtain a mathematical model of the glider ballast-buoyancy, ballast-depth and ballast-pitching angle conditioning system. The best three parametric estimation models are chosen, and the results of the comparison between simulated and estimated outputs are presented. The information obtained from the modelling and identification approaches are used for USM's Underwater Glider Prototype controller design. The information observed during this procedure are utilised for optimisation, stability, reliability and robustness analysis of the underwater glider. 相似文献
4.
Depth-trim mapping control of underwater vehicle with fins 总被引:1,自引:1,他引:0
Underwater vehicle plays an important role in ocean engineering.Depth control by fin is one of the difficulties for underwater vehicle in motion control.Depth control is indirect due to the freedom coupling between trim and axial motion.It includes the method of dynamic analysis and lift-resistance-coefficient experiment and theory algorithm.By considering the current speed and depth deviation,comprehensive interpretation is used in object-planning instruction.Expected depth is transformed into expected trim.Dynamic output fluctuation can be avoided,which is caused by linear mapping of deviation.It is steady and accurate for the motion of controlled underwater vehicles.The feasibility and efficiency of the control method are testified in the pool and natural area for experiments. 相似文献
5.
6.
7.
A hierarchical real-time control architecture for a semi-autonomous underwater vehicle 总被引:1,自引:0,他引:1
This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented. 相似文献
8.
The hydrodynamic interaction between an Autonomous Underwater Vehicle (AUV) manoeuvring in close proximity to a larger underwater vehicle can cause rapid changes in the motion of the AUV. This interaction can lead to mission failure and possible vehicle collision. Being self-piloted and comparatively small, an AUV is more susceptible to these interaction effects than the larger body. In an aim to predict the manoeuvring performance of an AUV under the effects of the interaction, the Australian Maritime College (AMC) has conducted a series of computer simulations and captive model experiments. A numerical model was developed to simulate pure sway motion of an AUV at different lateral and longitudinal positions relative to a larger underwater vehicle using Computational Fluid Dynamics (CFDs). The variables investigated include the surge force, sway force and the yaw moment coefficients acting on the AUV due to interaction effects, which were in turn validated against experimental results. A simplified method is presented to obtain the hydrodynamic coefficients of an AUV when operating close to a larger underwater body by transforming the single body hydrodynamic coefficients of the AUV using the steady-state interaction forces. This method is considerably less time consuming than traditional methods. Furthermore, the inverse of this method (i.e. to obtain the steady state interaction force) is also presented to obtain the steady-state interaction force at multiple lateral separations efficiently. Both the CFD model and the simplified methods have been validated against the experimental data and are capable of providing adequate interaction predictions. Such methods are critical for accurate prediction of vehicle performance under varying conditions present in real life. 相似文献
9.
Model-based feedback control of autonomous underwater gliders 总被引:6,自引:0,他引:6
We describe the development of feedback control for autonomous underwater gliders. Feedback is introduced to make the glider motion robust to disturbances and uncertainty. Our focus is on buoyancy-propelled, fixed-wing gliders with attitude controlled by means of active internal mass redistribution. We derive a nonlinear dynamic model of a nominal glider complete with hydrodynamic forces and coupling between the vehicle and the movable internal mass. We use this model to study stability and controllability of glide paths and to derive feedback control laws. For our analysis, we restrict to motion in the vertical plane and consider linear control laws. For illustration, we apply our methodology to a model of our own laboratory-scale underwater glider 相似文献
10.
11.
Design and implementation of time efficient trajectories for autonomous underwater vehicles 总被引:1,自引:0,他引:1
This paper discusses control strategies adapted for practical implementation and efficient motion of autonomous underwater vehicles (AUVs). For AUVs we would like efficiency in both the measured time and the energy consumption, the mission dictating the weight to put on each of these cost. As a first approach to this problem, we focus in this paper on time minimization. Based on the structure of the time optimal trajectories and of the pure motions, we develop an algorithm to design time efficient trajectories corresponding to piecewise constant thrust arcs with few actuator switchings. We do that by solving a new optimization problem where the unknowns are the time period between two actuator switchings as well as the values of the constant thrust arcs. We apply a direct method to compute the solutions numerically. With our algorithm, we gain considerable computational time. Moreover, with as few as three actuator switchings, the duration of our trajectories is within 10% of the optimal trajectories. Since our control strategies have a simple structure they can be implemented on a test-bed vehicle. For the experiments displayed in this paper we use a spherical underwater vehicle which exhibits with almost no preference of direction or orientation for movement; this gives us a very controllable and versatile vehicle. 相似文献
12.
13.
China Ocean Engineering - As a type of autonomous underwater vehicle (AUV), underwater gliders (UG) are getting increasing attention in ocean exploration. To save energy and satisfy the mission... 相似文献
14.
15.
Control parameter optimization is an efficient way to improve the endurance of underwater gliders(UGs), which influences their gliding efficiency and energy consumption. This paper analyzes the optimal matching between the net buoyancy and the pitching angle and proposes a segmented control strategy of Petrel-L. The optimization of this strategy is established based on the gliding range model of UG, which is solved based on the approximate model, and the variations of the optimal control paramet... 相似文献
16.
HAISHEN is a long-ranged and highly maneuverable AUV which has two operating modes: glider mode and flapping-foil propulsion mode. As part of the vehicle development, a three-dimensional mathematical model of the conceptual vehicle was developed on the assumption that HAISHEN has a rigid body with two independently controlled oscillating hydrofoils. A flapping-foil model was developed based on the work done by Georgiades et al. (2009). Effect of controllable hydrofoils on the vehicle stable motion performance was studied theoretically. Finally, a dynamics simulation of the vehicle in both operating modes is created in this paper. The simulation demonstrates that: (1) in the glider mode, owing to the independent control of the pitch angle of each hydrofoil, HAISHEN travels faster and more efficiently and has a smaller turning radius than conventional fix-winged gliders; (2) in the flapping-foil propulsion mode, HAISHEN has a high maneuverability with a turning radius smaller than 15 m and a forward motion velocity about 1.8 m/s; (3) the vehicle is stable under all expected operating conditions. 相似文献
17.
This study analyzes and summarizes seven main characteristics of the marine data sampled by multiple underwater gliders. These characteristics such as the big data volume and data sparseness make it extremely difficult to do some meaningful applications like early warning of marine environment. In order to make full use of the sea trial data, this paper gives the definition of two types of marine data cube which can integrate the big marine data sampled by multiple underwater gliders along saw-tooth paths, and proposes a data fitting algorithm based on time extraction and space compression(DFTS) to construct the temperature and conductivity data cubes. This research also presents an early warning algorithm based on data cube(EWDC) to realize the early warning of a new sampled data file.Experiments results show that the proposed methods are reasonable and effective. Our work is the first study to do some realistic applications on the data sampled by multiple underwater vehicles, and it provides a research framework for processing and analyzing the big marine data oriented to the applications of underwater gliders. 相似文献
18.
《Oceanic Engineering, IEEE Journal of》2008,33(2):59-68
19.
In this paper,the underwater vehicle,sling and the mother ship are considered as a single de-gree of freedom system connected by a spring.Through the analysis of this system,a physical model is es-tablished,which describes the motion of the vehicle caused by the ship motion and wave motion.Furthermore,a mathematical model based on this physical model is obtained,and a numerical solutionprogram is made.As an example,a practical launch and recovery system for an underwater robot is calcu-lated by use of the program.and the motion track of the robot is obtained. 相似文献
20.
This paper presents a theoretic implementation method of Morphing Unmanned Submersible Aerial Vehicle (MUSAV), which can both submerge in the water and fly in the air. Two different shapes are put forward so that the vehicle can suit both submergence and flight, considering the tremendous differences between hydrodynamic configuration and aerodynamic configuration of a vehicle. The transition of the two shapes can be achieved by using morphing technology. The water-to-air process, including water-exit, morphing, take-off and steady flight, is analyzed. The hydrodynamic and aerodynamic model of the vehicle exiting the water surface obliquely and then taking off into the air has been founded. The control strategy after morphing is analyzed and the control method is given. Numerical method is used to validate the motion model of the water-exit process. Results of simulations show the validity of the proposed model and the feasibility of MUSAV in theory. 相似文献