Relocation of Swarm Events in the June 1987 Earthquake Sequence from the Lake Aswan Area in Egypt

--We have examined the digital waveform data and relocated a number of events within the June 1987 earthquake swarm, which occurred beneath the northern part of Lake Aswan, 70 km southwest of the Aswan High Dam in Egypt. This swarm occurred between June 17th and 19th with a maximum magnitude event of "M_L"=3.5.¶Cross correlation between a chosen master and the analyzed events has been carried out on seismograms from stations of the Aswan network. The cross correlation demonstrates the presence of a difference in both the P wave ((t_p) and the S wave ((t_s) arrival times at each station in the network relative to the arrival times of the master event at the same stations. (t_p ranges between т.15 and 0.11 second, while (t_s ranges between т.17 and 0.11 second.¶The primary interpretation is that the se time differences represent an error in the manually picking arrival times. Then, (t_p and (t_s values for each event result from a change in the hypocentral parameters from those of the master event, assuming the P- and S-wave velocity distribution remains constant during the swarm activity. This interpretation enables us to determine the relative distribution of hypocenters with respect to the hypocentral location of the master event. We present the results from a swarm of 9 events demonstrating they originate from a nearly unique location, rather than the zone identified from the preliminary locations which used manually picked onset times.     

Electrical structure of the tectonically active Kalabsha Fault, Aswan, Egypt

In this work, we use the magnetotelluric (MT) method to detect geoelectrical conductivity anomalies in the Earth's crust and link them to local seismic activity. This application affords the unusual opportunity to study the percolation of water from a lake into a fault system and its effect on the induced seismicity. MT measurements were carried out in the period range 0.0046–420 s at nine sites along a 15 km-long North–South profile crossing the Kalabsha Fault, on the western bank of Lake Aswan. Data were analysed by 2D simultaneous inversion of both polarisations. The resulting model is compared with the local seismicity map and reveals the conductive signature of the fault, as well as geological and tectonic stresses prevailing in the Aswan area. Our MT investigations show the following features:

The measured MT strike aligns with the seismic epicentre axis corresponding to the Kalabsha Fault.

While crossing the Fault, enhanced conductivity is found down to depths of 5 km on a 1–2 km profile segment.

At mid-crustal depths (20 km), a very high conductive body is found to coincide with the main seismic cluster in the Aswan area.

These observations indicate that seismic activity and high electrical conductivity are related. The link between them is the presence of crustal fluids which are presumably the cause of the high conductivity observed. Their presence is also required to trigger the observed seismicity. In addition, we explain the lower conductivity of the local upper crust in terms of stress-modulated rock porosity. We believe that these results are of general significance, as they could explain the mid-crustal seismicity of tectonically active zones.     

Tomographic inversion for the three-dimensional seismic velocity structure of the Aswan region,Egypt

The Thurber iterative simultaneous inversion program is used to determine the three-dimensionalP-wave velocity structure in the Aswan seismic region of Egypt. The tomographic inversion presented in this study is based on 1131P-phase observations at 13 stations from 89 local earthquakes, all of which occurred within the Kalabsha fault zone. The assumed initial velocity model is that deduced from local explosion experiments. The results indicate that the Aswan region is characterized by a heterogeneous crust, consisting of a shallow, low-velocity zone and a deeper high-velocity anomaly. Seismic velocity structure within the shallow part demonstrates that the inferred change in velocity exists primarily across the east-west trending Kalabsha fault scarp, whereas the high-velocity zone is located south of this fault. Two well-resolved, low-velocity zones appear within the upper 6 km of the crust. The first coincides with a graben structure located between the Kalabsha and Seiyal faults and the second exists between the N-S Kurkur fault and the main axis of Lake Aswan. Both low-velocity zones occupy an area of approximately 30×40 km, located along the western bank of the lake. The most significant result of this study is that the location of the deeper, high-velocity anomaly coincides with the concentration of seismic activity in the lower crustal layer.     

In Situ Electromigration as a Method for Removing Sulfate, Metals, and Other Contaminants from Ground Water

Electromigration is proposed as an in situ method for preconcentrating contaminants in ground water prior to pumping and treating. In earlier investigations by the senior author and co-workers, it was found that Cu in synthetic ground water migrated strongly to a Pt cathode and plated out as metallic copper. In the present study, carbon electrodes were inserted into a laboratory column of fine quartz sand that was saturated with a lower concentration of CuSO₄ solution. A fixed potential of 2.5 V was applied, causing dissolved Cu and SO₄ to accumulate strongly at the cathode and anode, respectively. Only minor plating-out of Cu took place on the carbon electrodes. In addition to the use of carbon electrodes, the present research also investigated the effects of a lower concentration of metal, accumulation of SO₄ adjacent to the anodes, adsorption of Cu on the sand, and competition by moving ground water.
At an imposed voltage of 2.5 V and in the presence of 65 mg/L of dissolved Cu and 96 mg/L of SO₄ (0.001 M CuSO₄ solution), electrolysis of water caused large changes in the pH and speciation of the aqueous components, as well as precipitation of solid Cu-hydroxides. Significant retardation of Cu occurred in the presence of ground water flowing at an average intergranular velocity of 0.2 m/day, but only minor retardation at water velocities of 1.9 and 2.9 m/day.
Sulfate tends to migrate strongly to the anodes, suggesting that in situ electromigration may offer a useful new method for preconcentrating such highly soluble ions as SO₄, NO₃, and CI that are difficult to remove by conventional pump-and-treat methods. A number of potential problems exist that should be addressed in a field test.     

A Field Test of Electromigration as a Method for Remediating Sulfate from Shallow Ground Water

Eloctromigraiion offers a potential tool for remediating ground water contaminated with highly soluble components, such as Na⁺, Cl, NO₃ and SO₄⁻. A field experiment was designed to lest the efficacy of electromigration for preconcontrating dissolved SO₄² in ground water associated with a fossil-fuel power plant. Two shallow wells, 25 feel apart (one 25 feel deep, the other 47 feet deep), were constructed in the upper portion of an unconfined alluvial aquifer. The wells were constructed with a double-wall design, with an outer casing of 4-inch PVC and an inner lube of 2-inch FVC; both were fully slotted (0.01 inch). Electrodes were constructed by wrapping the inner lulling with a 100-foot length of rare-earth metal oxide/copper wire. An electrical potential of 10.65 volts DC Was applied, and tests were run for periods of 12, 44, and 216 hours. Results showed large changes in the pH from the initial pH of ground water of about 7.5 to values of approximately 2 and 12 at the anode and cathode, respectively. Despite the fact that the test conditions were far from ideal, dissolved SO₄^2-; was significantly concentrated at the anode. Over a period of approximately nine days, the concentration of SO₄^2- at the anode reached what appeared to he a steady-state value of 2200 mg/L. compared lo the initial value in ground water of approximately 1150 mg/L. The results of this field lest should encourage further investigation of electromigration as a tool in the remediation of contaminated ground water.     

A Laboratory Study of Electromigration as a Possible Field Technique for the Removal of Contaminants from Ground Water

A method for removing dissolved contaminants from ground water by emplacing electrodes in the aquifer has been tested using laboratory columns of pure quartz silty sand saturated with solutions of CuSO4 and copper-contaminated synthetic ground water. In the Soviet Union a similar method is commonly used in searching for hidden deposits of metallic minerals. In the Soviet method, electrodes are emplaced in the ground and ions of the metals being sought are caused to migrate along an imposed voltage gradient; the ions are collected for analysis in acid-filled ceramic cylinders which surround the cathodes.
In this study, quick-freezing was used to obtain the distribution of ions within the columns as a function of time and space. With voltages up to 2.5 V and cur-rents of a few tens of microamps, more than 50 percent of the dissolved copper was removed from the interstitial fluid in the porous columns in a period of five days. Current efficiencies ranged from more than 80 percent to less than 5 percent, depending on such factors as length of time of electrolysis, pH, concentration of Cu, and presence of other ions. The efficiency and economics of the technique of electromigration should be evaluated in additional laboratory studies and in the field, but in theory the method should be useful for removing any charged species in ground water, including some organics.     

Used Motor Oil as a Source of MTBE, TAME, and BTEX to Ground Water

Methyl tert-butyl ether (MTBE), the widely used gasoline oxygenate, has been identified as a common ground water contaminant, and BTEX compounds (benzene, toluene, ethylbenzene, and xylenes) have long been associated with gasoline spills. Because not all instances of ground water contamination by MTBE and BTEX can be attributed to spills or leaking storage tanks, other potential sources need to be considered. In this study, used motor oil was investigated as a potential source of these contaminants. MTBE in oil was measured directly by methanol extraction and gas chromatography using a flame ionization detector (GC/FID). Water was equilibrated with oil samples and analyzed for MTBE, BTEX, and the oxygenate tert-amyl methyl ether (TAME) by purge- and-trap concentration followed by GC/FID analysis. Raoult's law was used to calculate oil-phase concentrations of MTBE, BTEX, and TAME from aqueous-phase concentrations. MTBE, TAME, and BTEX were not detected in any of five new motor oil samples, whereas these compounds were found at significant concentrations in all six samples of the used motor oil tested for MTBE and all four samples tested for TAME and BTEX. MTBE concentrations in used motor oil were on the order of 100 mg/L. TAME concentrations ranged from 2.2 to 87 mg/L. Concentrations of benzene were 29 to 66 mg/L, but those of other BTEX compounds were higher, typically 500 to 2000 mg/L.     

Internet Listservices as a Valuable Resource for Environmental Professionals in Soil and Ground Water Remediation

In 1957, four computers across the United States were linked to form the first version of what we now know as the Internet. The Internet has grown beyond what anyone working in the U.S. Department of Defense Advanced Research Projects Agency (DARPA) more than 40 years ago could have imagined. Yet despite the phenomenal growth of Internet users, and access to information in all fields of endeavor, finding genuinely useful and helpful resources is still a challenge. This article distils information on the most useful Internet listservers for environmental professionals working the site remediation.