Study on the CO<Subscript>2</Subscript> emissions embodied in the trade of China’s steel industry: based on the input–output model

The impact of trade on the environment and the climate has become a focus of attention. Tending to develop industries with higher added values, developed countries rely on importing high energy consumption goods from developing countries, and however, some CO₂ emissions are embodied in the process of import. Currently, the accounting method of the territorial responsibility used to get the international data of greenhouse gas inventories ignores the difference between domestic consumption and export demands. Thus, developing countries bear the responsibility of pollution emissions from the export. The steel industry is an important basic industry of China’s national economy as well as a vital part in the industrial system. With the expansion of trade scale, the impact of the export and import of China’s steel on CO₂ emissions is growing. This paper studied the embodied CO₂ emissions in the trade of China’s steel from 2005 to 2014, using the input–output model and the trade data of the China’s steel imports and exports. The results indicate that (1) the complete CO₂ emissions of China’s steel industry are high. (2) The increase in the export scale makes the embodied CO₂ emissions in the trade of China’s steel export increase, and (3) China is a net exporter of CO₂ emissions in the steel trade. Especially after 2007, the value of China’s steel exports has been larger than that of China’s steel imports, so China had borne much CO₂ emissions responsibility in the trade of China’s steel. Therefore, this paper puts forward that, in the future, the export structure of goods should be optimized into the high-tech products with the high added value, low energy consumption and low carbon emissions, and meanwhile, service industry is promoted to improve technical support to reduce CO₂ emissions in the steel industry.     

Polygenic formation model of the planet’s bituminous belts

In recent years, much attention has been paid to nontraditional hydrocarbon sources. Today the portion of nontraditional gas in the world extraction is 15% or 450 billion cubic meters, which hat makes up the volume of total gas exports from Russia. As is known, the easy-prospecting oil has been already found. The innovative technologies in geophysics, drilling, and excavation and the increased extraction coefficient expect further development and industrial compliance with these requirements. Based on calculations, the world oil reserves are now one trillion of stock tank barrels and one trillion barrels have been already extracted. The evergrowing demand for energy gives rise to the necessity of searching for and extracting more oil resources, and both these aspects are unique problems. The search for profitable petroleum deposits has become more and more difficult even in the leading companies. The increment of the world resources is a key vital question; therefore, the elaboration of criteria for the discovery of nontraditional deposits take on special significance in the economic respect. The authors are working out a conception that will be a guideline for future finding of the richest oil deposits in active geodynamic zones. For the first time, we suggest the polygenic formation model of the planet’s bituminous belts.     

我国的地球系统科学研究向何处去

近15年来,全球变化与地球系统科学研究在中国广泛开展,我国科学家越来越积极地参加各项国际计划。当前,一些重大的国际计划正在进入其新阶段（如IGBP-II,IODP）,恰好我国也正在制定科技发展中长期规划,迫切需要回顾我国地球系统科学的现状并探讨其今后方向。尽管中国作者的国际论文数量在增长,我国地球系统科学落后于国际的差距仍有拉大的趋势：国际前沿的许多热点问题,在中国尚未提上日程;中国学者在国际计划中早期多有贡献,但在项目总结中却很少有份。为此,提出 3点建议：（1）中国地球科学家应当扩大视野、立足本国、面向全球;（2）应当注意国际前沿动向,促进地学与生命科学在分子水平上的结合;（3）中国的地球科学,应当从以描述为主向探索理的方向发展。我们不应当满足于向国际学术界输出"原料",而要积极参加地球系统科学中关键问题的理论探讨。     

中国进出口贸易碳转移排放测算方法分析与评价

目前中国的碳转移排放测算方法有很多,虽然方法不尽相同,但总的结论和计算出的变化趋势类似。造成碳转移量测算结果产生较大差异的原因主要有两方面,一是碳排放强度的测算模型不同,二是对于中国加工贸易转移碳排放的认识不同。测算避免转移排放量时,如果不考虑加工贸易的影响,在某些年份（如2002年）甚至会得到＂中国是碳转移的净进口国...     

The Chromium Resources of Albania

During the past three decades Albania has been a major world source of chromite-in terms of both mine production and exports. However, the recent steep decline in Albania's production and export of chromite and ferrochromium has raised the question of the country's future status as a supplier of these commodities to the world market. This report describes the salient characteristics of Albania's chromium resources; examines the raw material base, mining and processing facilities, foreign trade, and programs controlling their development; and assesses future development prospects for the industry.     

Learning from the history of disaster vulnerability and resilience research and practice for climate change

This paper calculated the embodied carbon in China export and its distribution in each industrial sector. The calculation results showed the total carbon emission of export experienced an increase before 2007 and then a decrease till 2010. The ratio of export embodied carbon accounting for the total carbon emission in China also increased from 31 % in 2002 to 52 % in 2007 and then declined to 40 % in 2010. As for distribution, the export embodied carbon emission of the following industries such as machinery and equipment manufacturing, metal products manufacturing industry, chemical industry, textile, clothing and leather products manufacturing industry ranked the highest. According to the calculation and analysis of the main driving factors of embodied carbon growth, we analyzed the structure effect, scale effect and technological effect’s influence on embodied carbon growth, respectively. We also calculated the trade competitiveness index of 17 export industries. Through research, we found that the products with strong international competitiveness belong to high-carbon-emission categories, which was the main reason of high carbon emission in China export. Finally, we proposed related policy suggestions to promote China’s export trade structural readjustment and optimization and China’s low carbon development in export.     

Climate change and groundwater resources in Myanmar

Myanmar is located in Southeast Asia within the Mekong River Basin. The estimated annual surface and groundwater potentials are 1 081 km3 and 494 km3, respectively. Based on geological conditions, 11 different types of aquifers have been classified in Myanmar. The recent alluvial formation, Irrawaddy formation, Upper Pegu Group and Plateau limestone formation are the major water-bearing geologic formations of the country. In Myanmar, 89% of the groundwater is used for agriculture, approximately 8% is used for domestic consumption, and 3% is used for industrial purposes. Climate change projections for Myanmar from 2001 to 2100 predict general increases in temperature, clear-sky days, rainfall variability and flooding risks and a greater occurrence and intensity of extreme weather events across the country. Additional technology and investments are required to achieve groundwater resource security in response to climate changes. In addition, methods of ensuring the sustainability of groundwater resources must be implemented via collaborations with other countries and international sources.     

Research on China export structure adjustment: an embodied carbon perspective

This paper calculated the embodied carbon in China export and its distribution in each industrial sector. The calculation results showed the total carbon emission of export experienced an increase before 2007 and then a decrease till 2010. The ratio of export embodied carbon accounting for the total carbon emission in China also increased from 31 % in 2002 to 52 % in 2007 and then declined to 40 % in 2010. As for distribution, the export embodied carbon emission of the following industries such as machinery and equipment manufacturing, metal products manufacturing industry, chemical industry, textile, clothing and leather products manufacturing industry ranked the highest. According to the calculation and analysis of the main driving factors of embodied carbon growth, we analyzed the structure effect, scale effect and technological effect’s influence on embodied carbon growth, respectively. We also calculated the trade competitiveness index of 17 export industries. Through research, we found that the products with strong international competitiveness belong to high-carbon-emission categories, which was the main reason of high carbon emission in China export. Finally, we proposed related policy suggestions to promote China’s export trade structural readjustment and optimization and China’s low carbon development in export.

     

Farmers, foresters and forest temples: conservation in the Dong Mun uplands, Northeast Thailand

Between 1970 and 1980 villages adjacent to the Dong Mun Uplands of Northeastern Thailand were transformed from subsistence communities, based on wet rice production, to a cash economy linked to global markets and the national and international political order. Although formally designated reserves had been created on old growth forests, the new economic opportunities encouraged conversion of forests to agriculture. Attracted by a false belief that land was being made available for settlement, immigrants flooded in and cleared forests to plant dryland cash crops using the newly expanded and improved road network to export their products. Social forestry programs may have assisted community development and encouraged agricultural diversification but were insufficient to prevent the contraction of forests, which now remain only as degraded remnants on the steepest slopes and least accessible sites.To some extent the social, political and economic forces have stabilized in Dong Mun and evidence of a new relationship between humans and their forest land is appearing. The Royal Forest Service is largely reconciled to the loss of domain over most of forest reserve and is pursuing a modified management policy that shows some evidence of a shift from an industrial to a post-industrial mode.In recent years, Buddhist monks in forest temples found through the uplands have achieved some effective forest conservation and restoration. Their efforts stem from the Buddhist precepts of the sanctity of all life and a view that forests are places for contemplation and spiritual renewal. Monks have been able to protect and restore some forest land because their views and wishes are far more likely to be honored than laws and demands of government officials. This reflects a broader phenomenon in Thailand where considerable impetus for a contemporary environmental movement has come from religious sources in contrast to the west where it is largely a secular in origin.     

剪切带型金矿中金沉淀的力化学过程与成矿机理探讨

剪切带型金矿是一种重要的金矿床类型,有关该类型金矿的成因问题已开展了大量研究,但对于剪切带中金的沉淀析出机制和成矿过程仍存在较大争议,对于赋矿部位的构造属性与矿床关系的研究尚显薄弱。对此笔者整理分析了近年来国内外有关剪切带型金矿的研究进展,并结合我国胶东金矿的研究实例,运用断层阀和力化学理论分析发现,无论是脆性还是韧性剪切带,无论是脉型还是蚀变岩型金矿,其成矿的关键部位均与构造应力集中而导致的脆性破裂(特别是R、T、R’破裂的产生)和碎裂作用以及(多期)岩体侵位密切相关,并且脆性破裂所导致的压力骤降从而引发流体闪蒸的力化学过程可能是造成金沉淀析出成矿的有效机制,其中多期岩体侵位所提供的流体是成矿的物质基础。此外,从国内外实例可以看出,剪切带中的脆性破裂不仅发生于脆性或脆韧性构造域,也可以发生在较深层次的韧性构造域中,尽管韧性域中产生脆性破裂的原因还不十分清楚,但这可能是韧性剪切带成矿的关键机制之一。最后,综合岩体、流体、剪切带三者对成矿的耦合作用,文中提出剪切带型金矿的成矿机理为:(多期)岩体侵位-热液活动-构造剪切-应力集中-脆性破裂(碎裂)产生-压力骤降-流体闪蒸-元素(金)析出,如此循环往复方可形成大型剪切带型金矿。     

The balance of payments of oil-importing developing countries: An aggregate econometric analysis

Using annual data drawn from 1963–1983 an econometric model of the balance of payments of oil-importing less developed countries is estimated. The model consists of equations for exports, imports, export and import unit value indices, capital flows, the reserves and the exchange rate. An important feature of the model is the way in the way in which foreign exchange shortages affect imports, external borrowing and the exchange rate. A number of simulation exercises are carried out to determine the model's properties.     

Overbank sediments as appropriate geochemical sample media in regional stream sediment surveys for gold exploration in the savannah regions of northern Ghana

Conventional stream sediment sampling in which sediments are taken from the active channels during reconnaissance regional geochemical surveys in gold exploration has over the years failed to delineate prospective target zones in northern Ghana, where the relict is flat. Whereas the technique has been successful in the south western Ghana, which is characterised by moderate to high relief, generally the savannah north is associated with low relief, commonly with flat topographies and generally decoupled stream channels. Geochemical comparison of active stream and overbank sediments in this study demonstrate that active stream channels may contain contaminated materials of recent origin, but overbank sediments, except for the uppermost horizons, represent alluvial regolith of earlier depositional cycles over time. Based on gold value repeatability, composite samples taken from the overbank sediment layers were relatively less erratic and are considered to be an appropriate geochemical medium in delineating potential regional gold targets for follow up. The results show that overbank sediment sampling can be used as a cost-effective method to define broad anomalous zones; and the technique must be considered useful during reconnaissance geochemical surveys in the savannah regions.     

Natural mineral waters,curative-medical waters and their protection

In Europe different types of water are marketed, each strictly defined by EC Directive 80/777 (Natural Mineral Water, Spring and Table Water) or 80/778 (Drinking Water). In Germany, an additional type of water is common in the market: curative/medical water. Product quality and safety, registration as medicine, and pharmaceutical control are defined by the German Federal Medicine Act. A medical water is treated as any other medicine and may be sold only in pharmacies. The use of any water in Germany is controlled and strictly regulated by the Federal Water Act (Fricke 1981). The following requirements are set by the act: (1) No water use without a permit, which is limited in time and quantity. (2) No single or juristic person may own water. (3) Water resources of public interest and their recharge areas are to be protected by the definition of water protection zones. (Natural mineral water is not of public interest and therefore is not required to be protected by the definition of water protection zones, although it represents a market value of more than US$2 billion. Medical water is of public interest). The definition of water protection zones impacts private property rights and has to be handled carefully. In order to protect water resources, sometimes the economic basis of a traditional industrial and/or agricultural infrastructure is destroyed. The concerns and needs all citizens, including industry, must be considered in analyzing the adequacy of water protection zones.     

Implementing industrial ecology? Planning for eco-industrial parks in the USA

Despite the widespread incorporation of sustainable development into policy discourses, actually achieving the ‘win-win-win’ scenario of economic, environmental and social development continues to be problematic. Advocates of industrial ecology suggest that by shifting the basis of industrial production from a linear to a closed loop system, these gains can be achieved. In recent years, concepts drawn from industrial ecology have been used to plan and develop eco-industrial parks (EIPs) that seek to increase business competitiveness, reduce waste and pollution, create jobs and improve working conditions. Despite a growing interest in EIPs, there have been few empirically informed studies that seek to explore the potential contribution such EIPs may make to sustainable development. This paper contributes to a developing sympathetic critique of industrial ecology by focusing on the key problems and dilemmas that arise in the course of developing eco-industrial parks, drawing upon empirical work conducted in the USA. The paper draws upon both an extensive survey of EIPs and in-depth interviews conducted with a range of stakeholders at ten US sites. As the paper reveals, EIPs in the USA are in their early stages and likewise their contribution to both economic development and environmental policy, let alone social policies, is complicated and inchoate. The empirical material reveals that key features of industrial ecology such as inter-firm networking and collaboration in the form of materials interchange and energy cascading are either absent or in the early planning stages. In each of the ten cases what is emerging is a form of EIP partly determined by the geographic setting and broader economic realities of the locality. While collaborative behaviour between firms is central to EIP development if the potential benefits of industrial ecology are to be realised, it is important to realise that such behaviour is difficult to develop from scratch through policy intervention. In conclusion, the paper suggests that expectations must be realistic for the community and location in question. As part of that realism, EIP projects must be designed to allow for a gradual approach, and each phase needs to be financially viable.     

Developing a seismic source model for the Arabian Plate

A seismic source model is developed for the entire Arabian Plate, which has been affected by a number of earthquakes in the past and in recent times. Delineation and characterization of the sources responsible for these seismic activities are crucial inputs for any seismic hazard study. Available earthquake data and installation of local seismic networks in most of the Arabian Plate countries made it feasible to delineate the seismic sources that have a hazardous potential on the region. Boundaries of the seismic zones are essentially identified based upon the seismicity, available data on active faults and their potential to generate effective earthquakes, prevailing focal mechanism, available geophysical maps, and the volcanic activity in the Arabian Shield. Variations in the characteristics given by the above datasets provide the bases for delineating individual seismic zones. The present model consists of 57 seismic zones extending along the Makran Subduction Zone, Zagros Fold-Thrust Belt, Eastern Anatolian Fault, Aqaba-Dead Sea Fault, Red Sea, Gulf of Aden, Owen Fracture Zone, Arabian Intraplate, and a background seismic zone, which models the floating seismicity that is unrelated to any of the distinctly identified seismic zones. The features of the newly developed model make the seismic hazard results likely be more realistic.     

Maintaining domestic production through exports: the case of Japan’s metal forming machinery sector

Most advanced market economies have met difficulties retaining a manufacturing base. Domestic production remains important, however, given the downstream economic impacts of the manufacturing sector, including the advantages of export-base industries. In order to keep producing domestically, firms must persistently innovate and increasingly look to new markets. To explore the issue at greater length, this paper examines the case of Japan’s metal forming machinery industry, a key capital goods sector in terms of its criticality to overall durable goods manufacturing and its recent export success. This paper examines recent performance as an example of a successful industry that retains significant domestic production while simultaneously maintaining high export levels.     

硅酸盐风化与全球碳循 环研究回顾及新进展

硅酸盐风化是大气CO2 的一个主要汇,直接影响到全球碳循环进而影响全球气候。自Walker 等（1981）进行的开创 工作以来,有关“硅酸盐风化- 碳循环- 气候变化”方面的研究大量涌现。从计算机模型到河流水化学研究,从流域面积 超过百万平方公里的大河到数十数百平方公里的单岩性小河流,取得了很多重要的进展。从全球尺度上看,硅酸盐风化每 年所消耗的大气CO2 量为0.138~0.169 Gt,相比现在大气碳库中碳的含量（约800 Gt）,乍看似乎是微不足道的,然而硅酸盐 风化消耗CO2 并将其作为碳酸盐矿物埋藏在海洋,它的存留时间超过了百万年。因此,在地质时间尺度上,硅酸盐风化是 调节全球碳循环的一个重要机制。对小流域进行的研究发现,热带地区流经玄武岩/蛇绿岩的小流域有着最高的硅酸盐风化 和大气CO2 消耗速率,热带区域火山岩化学风化消耗的大气CO2 占全球硅酸盐风化所消耗量的10%,而流域面积不到1%。     

Winners, losers and curate's eggs: Urban and regional outcomes of Australian economic restructuring 1971–1991

Since the early 1970s the Australian economy has undergone major transformations common to other western industrialised countries. Jobs in manufacturing declined precipitately whilst the service economy grew, most significantly in producer services but also in lower skilled jobs. Tourism and services exports began to rival traditional agricultural and mining staples. Social outcomes, also typical of international trends, included rising unemployment and polarisation of incomes. Australia's changing global context, especially the nation's increasing orientation towards Asian growth economies, have underpinned restructuring. A political climate of economic rationalism has facilitated and accentuated restructuring. The economic shifts of the past quarter century have meant that everywhere the basis for economic growth has changed. Overlaying and reinforcing the re-definition of competitive advantage has been a shift in the pattern of agglomeration economies and diseconomies. New growth regions have emerged, others have had their prospects reinforced, and still others have had their outlook diminished in absolute or, more commonly, relative terms. The paper traces the regional outcomes of national economic restructuring and shifts in the balance of agglomeration economies and diseconomies over the period from 1971 to 1991. The focus is on the top end of the urban hierarchy, on specialised industrial cities where job loss from manufacturing has hit hard, amenity regions where international and domestic tourism have been major factors in growth, and non-metropolitan balances where growth has been uneven but generally low. Demographic, economic sectoral and welfare indicators are woven into a tableau of change expressed at national, intra-state and intrametropolitan scales.     

俯冲带岩浆作用与大陆地壳生长

大陆地壳的起源、生长和改造一直都是国际地学界广泛关注的热点问题,目前仍存在一定的争议,特别体现在陆壳增生的方式和速率上.为了探讨大陆地壳的生长方式,简要综述了俯冲带及其岩浆作用和大陆地壳生长的研究成果.俯冲带可划分为洋洋俯冲带、洋陆俯冲带和陆陆俯冲带,其岩浆作用以产出弧岩浆岩为主要特征,被广泛接受为大陆地壳生长的主要方式.目前主要有两种陆壳生长的假说:玄武岩模式和安山岩模式.玄武岩模式主要通过拆沉和底垫过程来实现新生地壳向大陆地壳的演化;安山岩模式则强调陆壳直接形成于产出安山质岩浆的俯冲带岩浆弧环境.俯冲带和碰撞带等板块汇聚边界是显生宙大陆地壳生长和改造的主要位置,俯冲带岩浆作用对陆壳生长发挥着重要的作用.      

Routes of Soviet timber to world markets

The USSR is the largest producer of roundwood and sawn wood in the world and 4–5% of production is exported, for the most part to Europe and Japan. This paper analyses the areal distribution of roundwood and sawnwood production and the spatial pattern of exports. Over 60% of the timber destined for export is delivered to ports or border stations by train: the rest moves by river. The major export ports for wood products and the character of their hinterlands are described. The economic problems arising from long-distance rail movements are examined and the impact of the areal shift in production towards the eastern regions is discussed. White Sea and Baltic ports may decline in importance, while the Pacific ports are likely to expand when Siberian wood starts flowing there on the new BAM railway.