Radar imagery of the southern Caloris region, Mercury

Radar imagery from July 2005 Arecibo observations has provided new information on surface relief over the southern portion of Caloris Basin and the smooth plains to the south of the basin. A lobe of smooth plains has been identified in the Mariner-unimaged region southwest of Mozart Crater that coincides precisely with topographically down-bowed terrain seen in earlier Arecibo radar altimetry. A 105-km-diameter crater has been found at 193.6° W, 25.6° N that appears to be the largest crater in the Caloris basin floor.     

The origin of lunar crater rays

Lunar rays are filamentous, high-albedo deposits occurring radial or subradial to impact craters. The nature and origin of lunar rays have long been the subjects of major controversies. We have determined the origin of selected lunar ray segments utilizing Earth-based spectral and radar data as well as FeO, TiO₂, and optical maturity maps produced from Clementine UVVIS images. These include rays associated with Tycho, Olbers A, Lichtenberg, and the Messier crater complex. It was found that lunar rays are bright because of compositional contrast with the surrounding terrain, the presence of immature material, or some combination of the two. Mature “compositional” rays such as those exhibited by Lichtenberg crater, are due entirely to the contrast in albedo between ray material containing highlands-rich primary ejecta and the adjacent dark mare surfaces. “Immaturity” rays are bright due to the presence of fresh, high-albedo material. This fresh debris was produced by one or more of the following: (1) the emplacement of immature primary ejecta, (2) the deposition of immature local material from secondary craters, (3) the action of debris surges downrange of secondary clusters, and (4) the presence of immature interior walls of secondary impact craters. Both composition and state-of-maturity play a role in producing a third (“combination”) class of lunar rays. The working distinction between the Eratosthenian and Copernican Systems is that Copernican craters still have visible rays whereas Eratosthenian-aged craters do not. Compositional rays can persist far longer than 1.1 Ga, the currently accepted age of the Copernican-Eratosthenian boundary. Hence, the mere presence of rays is not a reliable indication of crater age. The optical maturity parameter should be used to define the Copernican-Eratosthenian boundary. The time required for an immature surface to reach the optical maturity index saturation point could be defined as the Copernican Period.     

Radar imagery of Mercury’s putative polar ice: 1999-2005 Arecibo results

We present an updated survey of Mercury’s putative polar ice deposits, based on high-resolution (1.5-km) imaging with the upgraded Arecibo S-band radar during 1999-2005. The north pole has now been imaged over a full range of longitude aspects, making it possible to distinguish ice-free areas from radar-shadowed areas and thus better map the distribution of radar-bright ice. The new imagery of the south pole, though derived from only a single pair of dates in 2005, improves on the pre-upgrade Arecibo imagery and reveals many additional ice features. Some medium-size craters located within 3° of the north pole show near-complete ice coverage over their floors, central peaks, and southern interior rim walls and little or no ice on their northern rim walls, while one large (90 km) crater at 85°N shows a sharp ice-cutoff line running across its central floor. All of this is consistent with the estimated polar extent of permanent shading from direct sunlight. Some craters show ice in regions that, though permanently shaded, should be too warm to maintain unprotected surface ice owing to indirect heating by reflected and reradiated sunlight. However, the ice distribution in these craters is in good agreement with models invoking insulation by a thin dust mantle. Comparisons with Goldstone X-band radar imagery indicate a wavelength dependence that could be consistent with such a dust mantle. More than a dozen small ice features have been found at latitudes between 67° and 75°. All of this low-latitude ice is probably sheltered in or under steep pole-facing crater rim walls, although, since most is located in the Mariner-unimaged hemisphere, confirmation must await imaging by the MESSENGER orbiter. These low-latitude features are concentrated toward the “cold longitudes,” possibly indicating a thermal segregation effect governed by indirect heating. The radar imagery places the corrected locations of the north and south poles at 7°W, 88.35°N and 90°W, 88.7°S, respectively, on the original Mariner-based maps.     

Origin of bright ring-shaped craters in radar images of Venus

The surface of Venus viewed in Arecibo radar images has a small population of bright ring-shaped features. These features are interpreted as the rough or blocky deposits surrounding craters of impact or volcanic origin. Population densities of these bright ring features are small compared with visually identified impact craters on the surface of the Moon and volcanic craters on Io. However, they are comparable to the short-lived radar-bright haloes associated with ejecta deposits of young craters on the Moon. This suggests that bright radar signatures of the deposits around Venusian craters are obliterated by an erosional or sedimentary process. We have evaluated the hypothesis that bright radar crater signatures were obliterated by a global mantle deposited after impacts of very large bolides. The mechanism accounts satisfactorily for the population of features with internal diameters greater than 64 km. The measured population of craters with internal diameters between 32 and 64 km is difficult to account for with the model but it may be underestimated because of poor radar resolution (5 to 20 km). Other possible mechanisms for the removal of radar bright crater signatures include in situ chemical weathering of rocks and mantling by young volcanic deposits. All three alternatives may be consistent with existing radar roughness and cross-section data and Venera 8, 9, and 10 data. However, imaging observations from a lander on the rolling plains or lowlands may verify or disprove the proposed global mantling. New high-resolution ground-based radar data can also contribute new information on the nature and origin of these radar bright ring features.     

A mechanism for the production of lunar crater rays

Observations of high resolution photographs of part of one of the prominent rays of the lunar crater Copernicus show that there is a concentration of small bright rayed and haloed craters within the ray. These craters contribute to the overall ray brightness; they have been measured and their surface distribution has been mapped. Sixty-two percent of the bright craters can be identified from study of high resolution photographs as concentric impact craters. These craters contain in their ejecta blankets, rocks from the lunar substrate that are brighter than the adjacent mare surface. It is concluded that the brightness of the large ray from the crater Copernicus is due to the composite effect of many small concentric impact craters with rocky ejecta blankets. If this is the dominant mechanism for the production of other rays from Copernicus and other large lunar craters, then rays may not contain significant amounts of ejecta from the central crater or from large secondary craters. They may in fact only reflect local excavation of mare substrate material by myriads of small secondary or tertiary impact craters.     

Geology of the Selk crater region on Titan from Cassini VIMS observations

Observations of Titan obtained by the Cassini Visual and Infrared Mapping Spectrometer (VIMS) have revealed Selk crater, a geologically young, bright-rimmed, impact crater located ∼800 km north-northwest of the Huygens landing site. The crater rim-crest diameter is ∼90 km; its floor diameter is ∼60 km. A central pit/peak, 20-30 km in diameter, is seen; the ratio of the size of this feature to the crater diameter is consistent with similarly sized craters on Ganymede and Callisto, all of which are dome craters. The VIMS data, unfortunately, are not of sufficient resolution to detect such a dome. The inner rim of Selk crater is fluted, probably by eolian erosion, while the outer flank and presumed ejecta blanket appear dissected by drainages (particularly to the east), likely the result of fluvial erosion. Terracing is observed on the northern and western walls of Selk crater within a 10-15 km wide terrace zone identified in VIMS data; the terrace zone is bright in SAR data, consistent with it being a rough surface. The terrace zone is slightly wider than those observed on Ganymede and Callisto and may reflect differences in thermal structure and/or composition of the lithosphere. The polygonal appearance of the crater likely results from two preexisting planes of weakness (oriented at azimuths of 21° and 122° east of north). A unit of generally bright terrain that exhibits similar infrared-color variation and contrast to Selk crater extends east-southeast from the crater several hundred kilometers. We informally refer to this terrain as the Selk “bench.” Both Selk and the bench are surrounded by the infrared-dark Belet dune field. Hypotheses for the genesis of the optically bright terrain of the bench include: wind shadowing in the lee of Selk crater preventing the encroachment of dunes, impact-induced cryovolcanism, flow of a fluidized-ejecta blanket (similar to the bright crater outflows observed on Venus), and erosion of a streamlined upland formed in the lee of Selk crater by fluid flow. Vestigial circular outlines in this feature just east of Selk’s ejecta blanket suggest that this might be a remnant of an ancient, cratered crust. Evidently the southern margin of the feature has sufficient relief to prevent the encroachment of dunes from the Belet dune field. We conclude that this feature either represents a relatively high-viscosity, fluidized-ejecta flow (a class intermediate to ejecta blankets and long venusian-style ejecta flows) or a streamlined upland remnant that formed downstream from the crater by erosive fluid flow from the west-northwest.     

Lunar and Venusian radar bright rings

Twenty-one lunar craters have radar bright ring appearances which are analogous to eleven complete ring features in the earth-based 12.5 cm observations of Venus. Radar ring diameters and widths for the lunar and Venusian features overlap for sizes from 45 to 100 km. Radar bright areas for the lunar craters are associated with the slopes of the inner and outer rim walls, while level crater floors and level ejecta fields beyond the raised portion of the rim have average radar backscatter. We propose that the radar bright areas of the Venusian rings are also associated with the slopes on the rims of craters.The lunar craters have evolved to radar bright rings via mass wasting of crater rim walls and via post impact flooding of crater floors. Aeolian deposits of fine-grained material on Venusian crater floors may produce radar scattering effects similar to lunar crater floor flooding. These Venusian aeolian deposits may preferentially cover blocky crater floors producing a radar bright ring appearance.We propose that the Venusian features with complete bright ring appearances and sizes less than 100 km are impact craters. They have the same sizes as lunar craters and could have evolved to radar bright rings via analogous surface processes.     

The Deep Impact oblique impact cratering experiment

The Deep Impact probe collided with 9P Tempel 1 at an angle of about 30° from the horizontal. This impact angle produced an evolving ejecta flow field very similar to much smaller scale oblique-impact experiments in porous particulate targets in the laboratory. Similar features and phenomena include a decoupled vapor/dust plume at the earliest times, a pronounced downrange bias of the ejecta, an uprange “zone of avoidance” (ZoA), heart-shaped ejecta ray system (cardioid pattern), and a conical (but asymmetric) ejecta curtain. Departures from nominal cratering evolution, however, provide clues on the nature of the impact target. These departures include: fainter than expected flash at first contact, delayed emergence of the self-luminous vapor/dust plume, uprange-directed plume, narrow early-time uprange ray followed by a late-stage uprange plume, persistence of ejecta asymmetries (and the uprange ZoA) throughout the approach sequence, emergence of a downrange ZoA at late times, detachment of uprange curved rays, very long lasting non-radial ejecta rays, and high-angle ejecta plume lasting over the entire encounter. The first second of crater formation most closely resembles the consequences of a highly porous target, while later evolution indicates that the target may be layered as well. Experiments also reveal that impacts into highly porous targets produce a vapor/dust plume directed back up the incoming trajectory. This uprange plume is attributed to cavitation within a narrow penetration funnel. The observed lateral expansion speed of the initial vapor plume downrange provides an estimate for the total vaporized mass equal to ∼5mp (projectile masses) of water ice or 6mp of CO₂. The downrange plume speed is consistent with the gas expansion added to the downrange horizontal component of the DI probe. Based on high-speed spectroscopy of experimental impacts, the observed delay in brightening of the DI plume may be the result of delayed condensation of carbon, in addition to silicates. Observed molecular species in the initial self-luminous vapor plume likely represent recombination products from completely dissociated target materials. The crater produced by the impact can be estimated from Earth-based observations of total ejected mass to be 130-220 m in diameter. This size range is consistent with a 220 m-diameter circular feature at the point of impact visible in highly processed, deconvolved HRI images. The final crater, however, may resemble an inverted sombrero-hat, with a deep central pit surrounded by a shallow excavation crater. Excavated distal material observed from the Earth was likely from the upper few meters contrasted with ballistic ejecta observed from the DI flyby, which included deep materials (10-30 m) within the diffuse plume above the crater and shallower (5-10 m) materials within the ejecta curtain.     

The rayed crater Zunil and interpretations of small impact craters on Mars

A 10-km diameter crater named Zunil in the Cerberus Plains of Mars created ∼¹⁰⁷ secondary craters 10 to 200 m in diameter. Many of these secondary craters are concentrated in radial streaks that extend up to 1600 km from the primary crater, identical to lunar rays. Most of the larger Zunil secondaries are distinctive in both visible and thermal infrared imaging. MOC images of the secondary craters show sharp rims and bright ejecta and rays, but the craters are shallow and often noncircular, as expected for relatively low-velocity impacts. About 80% of the impact craters superimposed over the youngest surfaces in the Cerberus Plains, such as Athabasca Valles, have the distinctive characteristics of Zunil secondaries. We have not identified any other large (?10 km diameter) impact crater on Mars with such distinctive rays of young secondary craters, so the age of the crater may be less than a few Ma. Zunil formed in the apparently youngest (least cratered) large-scale lava plains on Mars, and may be an excellent example of how spallation of a competent surface layer can produce high-velocity ejecta (Melosh, 1984, Impact ejection, spallation, and the origin of meteorites, Icarus 59, 234-260). It could be the source crater for some of the basaltic shergottites, consistent with their crystallization and ejection ages, composition, and the fact that Zunil produced abundant high-velocity ejecta fragments. A 3D hydrodynamic simulation of the impact event produced 10¹⁰ rock fragments ?10 cm diameter, leading to up to 10⁹ secondary craters ?10 m diameter. Nearly all of the simulated secondary craters larger than 50 m are within 800 km of the impact site but the more abundant smaller (10-50 m) craters extend out to 3500 km. If Zunil is representative of large impact events on Mars, then secondaries should be more abundant than primaries at diameters a factor of ∼1000 smaller than that of the largest primary crater that contributed secondaries. As a result, most small craters on Mars could be secondaries. Depth/diameter ratios of 1300 small craters (10-500 m diameter) in Isidis Planitia and Gusev crater have a mean value of 0.08; the freshest of these craters give a ratio of 0.11, identical to that of fresh secondary craters on the Moon (Pike and Wilhelms, 1978, Secondary-impact craters on the Moon: topographic form and geologic process, Lunar Planet. Sci. IX, 907-909) and significantly less than the value of ∼0.2 or more expected for fresh primary craters of this size range. Several observations suggest that the production functions of Hartmann and Neukum (2001, Cratering chronology and the evolution of Mars, Space Sci. Rev. 96, 165-194) predict too many primary craters smaller than a few hundred meters in diameter. Fewer small, high-velocity impacts may explain why there appears to be little impact regolith over Amazonian terrains. Martian terrains dated by small craters could be older than reported in recent publications.     

A photometric investigation of the lunar crater rays

This investigation deals with accurate photometric data concerning a number of rays of Tycho, Copernicus, Kepler, and Aristarchus. They have been derived from plates taken at the Yerkes Observatory in a night of a total lunar eclipse near phase angle 0°. By comparing the normal albedo with that of the surroundings of the rays we found that they can be interpreted as samples of telescopically unresolved bright patches. The fractional areak covered by these patches varies along the ray and shows that they are composed of a number of separate ray elements. The observed value ofk is in accordance with counts on a Ranger photograph.The distribution of the brightness along the rays has also been compared with the mass distribution of the ejecta in the rays around terrestrial explosion craters. The mean length of the lunar rays is in full accordance with its extrapolated terrestrial value. We cannot assume, however, that the rays are regions covered with a homogeneous layer of white powder, because the comparison with the terrestrial explosion craters gives an unprobable value for the height of the layer of the ejecta. The same results follow now from the photometric properties of the rays.From a comparison with the difference in albedo at the Surveyor's footprints follows the suggestion that the lunar rays are composed of bright patches, where the surface material came into a state of lower porosity, while it has a higher porosity in the dark halos around the craters. A suspected dark halo around Tycho has photometrically been measured and the results prove that it really exists. Kepler also shows a very weak halo.     

Regolith transport in craters on Eros

Images of Eros from the NEAR Shoemaker spacecraft reveal bright and dark albedo features on steep crater walls unlike markings previously observed on asteroids. These features have been attributed to the downslope movement of space-weathered regolith, exposing less weathered material (Science 292 (2001) 484; Meteor. Planet. Sci. 36 (2001) 1617; Icarus 155 (2002) 145). Here we present observations of the interiors of large craters (>1 km in diameter) to test this hypothesis and constrain the origin of the features. We find that bright regions in these craters correspond to steep slopes, consistent with previous work. The geographic distribution of craters with albedo variations shows no pattern and does not resemble the distribution of ponds, another phenomenon on Eros attributed to regolith movement. Shadows and other indications of topography are not observed at feature boundaries, implying that the transported layer is ?1 m thick. The presence of multiple bright and dark units on long slopes with sharp boundaries between them suggests that mobilized regolith may be halted by frictional or other effects before reaching the foot of the slope. Features on crater walls should darken at the same rate as bright ejecta deposits from crater formation; the lack of observed, morphologically fresh craters with bright interiors or ejecta suggests that the albedo patterns are younger than the most recently formed craters greater than about 100 m in diameter. Smaller or micrometeorite impacts, which would not necessarily leave evident deposits of bright ejecta, remain possible causes of albedo patterns. Although their effectiveness is difficult to assess, electrostatic processes and thermal creep are also candidates.     

Exposure of spectrally distinct material by impact craters on Mercury: Implications for global stratigraphy

MESSENGER’s Mercury Dual Imaging System (MDIS) obtained multispectral images for more than 80% of the surface of Mercury during its first two flybys. Those images have confirmed that the surface of Mercury exhibits subtle color variations, some of which can be attributed to compositional differences. In many areas, impact craters are associated with material that is spectrally distinct from the surrounding surface. These deposits can be located on the crater floor, rim, wall, or central peak or in the ejecta deposit, and represent material that originally resided at depth and was subsequently excavated during the cratering process. The resulting craters make it possible to investigate the stratigraphy of Mercury’s upper crust. Studies of laboratory, terrestrial, and lunar craters provide a means to bound the depth of origin of spectrally distinct ejecta and central peak structures. Excavated red material (RM), with comparatively steep (red) spectral slope, and low-reflectance material (LRM) stand out prominently from the surrounding terrain in enhanced-color images because they are spectral end-members in Mercury’s compositional continuum. Newly imaged examples of RM were found to be spectrally similar to the relatively red, high-reflectance plains (HRP), suggesting that they may represent deposits of HRP-like material that were subsequently covered by a thin layer (∼1 km thick) of intermediate plains. In one area, craters with diameters ranging from 30 km to 130 km have excavated and incorporated RM into their rims, suggesting that the underlying RM layer may be several kilometers thick. LRM deposits are useful as stratigraphic markers, due to their unique spectral properties. Some RM and LRM were excavated by pre-Tolstojan basins, indicating a relatively old age (>4.0 Ga) for the original emplacement of these deposits. Detailed examination of several small areas on Mercury reveals the complex nature of the local stratigraphy, including the possible presence of buried volcanic plains, and supports sequential buildup of most of the upper ∼5 km of crust by volcanic flows with compositions spanning the range of material now visible on the surface, distributed heterogeneously across the planet. This emerging picture strongly suggests that the crust of Mercury is characterized by a much more substantial component of early volcanism than represented by the phase of mare emplacement on Earth’s Moon.     

Eminescu impact structure: Insight into the transition from complex crater to peak-ring basin on Mercury

Peak-ring basins represent an impact-crater morphology that is transitional between complex craters with central peaks and large multi-ring basins. Therefore, they can provide insight into the scale dependence of the impact process. Here the transition with increasing crater diameter from complex craters to peak-ring basins on Mercury is assessed through a detailed analysis of Eminescu, a geologically recent and well-preserved peak-ring basin. Eminescu has a diameter (∼125 km) close to the minimum for such crater forms and is thus representative of the transition. Impact crater size-frequency distributions and faint rays indicate that Eminescu is Kuiperian in age, geologically younger than most other basins on Mercury. Geologic mapping of basin interior units indicates a distinction between smooth plains and peak-ring units. Our mapping and crater retention ages favor plains formation by impact melt rather than post-impact volcanism, but a volcanic origin for the plains cannot be excluded if the time interval between basin formation and volcanic emplacement was less than the uncertainty in relative ages. The high-albedo peak ring of Eminescu is composed of bright crater-floor deposits (BCFDs, a distinct crustal unit seen elsewhere on Mercury) exposed by the impact. We use our observations to assess predictions of peak-ring formation models. We interpret the characteristics of Eminescu as consistent with basin formation models in which a melt cavity forms during the impact formation of craters at the transition to peak ring morphologies. We suggest that the smooth plains were emplaced via impact melt expulsion from the central melt cavity during uplift of a peak ring composed of BCFD-type material. In this scenario the ringed cluster of peaks resulted from the early development of the melt cavity, which modified the central uplift zone.     

Radar imaging of Asteroid 7 Iris

Arecibo radar images of Iris obtained in November 2006 reveal a topographically complex object whose gross shape is approximately ellipsoidal with equatorial dimensions within 15% of 253 × 228 km. The radar view of Iris was restricted to high southern latitudes, precluding reliable estimation of Iris’ entire 3D shape, but permitting accurate reconstruction of southern hemisphere topography. The most prominent features, three roughly 50-km-diameter concavities almost equally spaced in longitude around the south pole, are probably impact craters. In terms of shape regularity and fractional relief, Iris represents a plausible transition between ∼50-km-diameter asteroids with extremely irregular overall shapes and very large concavities, and very much larger asteroids (Ceres and Vesta) with very regular, nearly convex shapes and generally lacking monumental concavities.     

Martian perched craters and large ejecta volume: Evidence for episodes of deflation in the northern lowlands

Abstract— The northern lowland plains, such as those found in Acidalia and Utopia Planitia, have high percentages of impact craters with fluidized ejecta. In both regions, the analysis of crater geometry from Mars Orbiter Laser Altimeter (MOLA) data has revealed large ejecta volumes, some exceeding the volume of excavation. Moreover, some of the crater cavities and fluidized ejecta blankets of these craters are topographically perched above the surrounding plains. These perched craters are concentrated between 40 and 70°N in the northern plains. The atypical high volumes of the ejecta and the perched craters suggest that the northern lowlands have experienced one or more episodes of resurfacing that involved deposition and erosion. The removal of material, most likely caused by the sublimation of ice in the materials and their subsequent erosion and transport by the wind, is more rapid on the plains than on the ejecta blankets. The thermal inertia difference between the ejecta and the surrounding plains suggests that ejecta, characterized by a lower thermal inertia, protect the underneath terrain from sublimation. This results in a decreased elevation of the plains relative to the ejecta blankets. Sublimation and eolian erosion can be particularly high during periods of high obliquity.     

Rays and secondary craters of Tycho

The large, fresh crater Tycho in the nearside lunar highlands has an extensive system of bright rays covering approximately 560,000 km², containing dense clusters of secondary craters. Examination of crater densities in several clusters shows that Tycho produced almost 10⁶ secondary craters larger than 63 m diameter. This is a lower limit, because small crater densities are reduced, most likely by mass wasting. We estimate a crater erasure rate of 2-6 cm/Myr, varying with crater size, and consistent with previous results. This process has removed many small craters, and it is probable that the original number of secondary craters formed by Tycho was higher. Also, we can only identify distant secondaries of Tycho where they occur in bright rays. Craters on Mars and Europa also formed large numbers of secondaries, but under possibly ideal conditions for spallation as a mechanism to produce high-velocity ejecta fragments. The results from Tycho show that large numbers of such fragments can be produced even from impact into a heavily fragmented target on which spallation is expected to be less important.     

Morphology and origin of palimpsests on Ganymede based on Galileo observations

Palimpsests are large, circular, low-relief impact scars on Ganymede and Callisto. These structures were poorly understood based on Voyager-era analysis, but high-resolution Galileo images allow more detailed inspection. We analyze images of four Ganymedean palimpsests targeted by Galileo: Memphis and Buto Faculae, Epigeus, and Zakar. Ganymedean craters and Europan ring structures are used as tools to help better understand palimpsests, based on morphologic similarities. From analysis of Galileo images, palimpsests consist of four surface units: central plains, an unoriented massif facies, a concentric massif facies, and outer deposits. Using as a tie point the location in these structures where secondary craters begin to appear, outer deposits of palimpsests are analogous to the outer ejecta facies of craters; the concentric massif facies of palimpsests are analogous to the pedestal facies of craters; and the unoriented massif facies and central plains are analogous to crater interiors. These analogies are supported by the presence of buried preexisting structure beneath the outer two and absence of buried structure beneath the inner two units. Our observations indicate that palimpsest deposits represent fluidized impact ejecta, rather than cryovolcanic deposits or ancient crater interiors.     

Shallow and deep fresh impact craters in Hesperia Planum,Mars

The depths of 109 impact craters 2–16 km in diameter, located on the ridged plains materials of Hesperia Planum, Mars, have been measured from their shadow lengths using digital Viking Orbiter images (orbit numbers 417S–419S) and the PICS computer software. On the basis of their pristine morphology (very fresh lobate ejecta blankets, well preserved rim crests, and lack of superposed impact craters), 57 of these craters have been selected for detailed analysis of their spatial distribution and geometry. We find that south of 30°S, craters <6.0 km in diameter are markedly shallower than similar-sized craters equatorward of this latitude. No comparable relationship is observed for morphologically fresh craters >6.0 km diameter. We also find that two populations exist for older craters <6.0 km diameter. When craters that lack ejecta blankets are grouped on the basis of depth/diameter ratio, the deeper craters also typically lie equatorward of 30° S. We interpret the spatial variation in crater depth/diameter ratios as most likely due to a poleward increase in volatiles within the top 400 m of the surface at the times these craters were formed.     

Crater modification and geologic activity in Enceladus' heavily cratered plains: Evidence from the impact crater distribution

Although we can observe current activity on Saturn's satellite Enceladus with Cassini, insight into past activity is best achieved (for now) through studying the impact crater distributions. Furthermore, approximation of terrain ages can only be attained through calculations using crater densities and estimations of impact rates in the saturnian system. Here we focus on what the impact crater distribution in Enceladus' heavily cratered plains can tell us about Enceladus' geologic history. We use Cassini ISS images to count craters in the heavily cratered plains on Enceladus, along with Rhea, Dione, Tethys and Mimas as references, to develop and compare their size-frequency distributions. Comparisons of our counts show that Enceladus' cratered plains distribution is unique in that it appears to have a relative deficiency of craters for diameters ?2 km and ?6 km compared to the other satellites' heavily cratered plains. Our data also indicates that the impact crater density within the cratered plains changes with latitude. Specifically, both the north and south mid-latitude regions have approximately three times higher density than the equatorial region. We hypothesize that the “missing” small and large craters in Enceladus' cratered plains is due to a combination of viscous relaxation of the larger craters, and burial of the relaxed large craters and small craters by south polar plume and possibly E-ring material. We also conclude that the spatial density distribution is not consistent with recent polar wander.