Nuclear spin temperature of ammonia in Comet 9P/Tempel 1 before and after the Deep Impact event

The Deep Impact mission succeeded in excavating inner materials from the nucleus of Comet 9P/Tempel 1 on 2005 July 04 (at 05:52 UT). Comet 9P/Tempel 1 is one of Jupiter family short period comets, which might originate in the Kuiper belt region in the solar nebula. In order to characterize the comet and to support the mission from the ground-based observatory, optical high-dispersion spectroscopic observations were carried out with the echelle spectrograph (UVES) mounted on the 8-m telescope VLT (UT2) before and after the Deep Impact event. Ortho-to-para abundance ratios (OPRs) of cometary ammonia were determined from the NH₂ emission spectra. The OPRs of ammonia on July 3.996 UT and 4.997 UT were derived to be 1.28±0.07 (nuclear spin temperature: Tspin=24±2 K) and 1.26±0.08 (Tspin=25±2 K), respectively. There is no significant change between before and after the impact. Actually, most materials ejected from the impact site could have moved away from the nucleus on July 4.997 UT, about 17 h after the impact. However, a small fraction of the ejected materials might remain in the slit of UVES instrument at that time because an excess of about 20% in the NH₂ emission flux is observed above the normal activity level was found [Manfroid, J., Hutsemékers, D., Jehin, E., Cochran, A.L., Arpigny, C., Jackson, W.M., Meech, K.J., Schulz, R., Zucconi, J.-M., 2007. Icarus. This issue]. If the excess of NH₂ on July 04.997 UT was produced from icy materials excavated by the Deep Impact, then an upper-limit of the ammonia OPR would be 1.75 (Tspin>17 K) for those materials. On the other hand, the OPR of ammonia produced from the quiescent sources was similar to that of the Oort cloud comets observed so far. This fact may imply that physical conditions where cometary ices formed were similar between Comet 9P/Tempel 1 and the Oort cloud comets.     

Submillimeter Wave Astronomy Satellite observations of Comet 9P/Tempel 1 and Deep Impact

On 4 July 2005 at 5:52 UT the Deep Impact mission successfully completed its goal to hit the nucleus of 9P/Tempel 1 with an impactor, forming a crater on the nucleus and ejecting material into the coma of the comet. NASA's Submillimeter Wave Astronomy Satellite (SWAS) observed the ₁₁₀-₁₀₁ ortho-water ground-state rotational transition in Comet 9P/Tempel 1 before, during, and after the impact. No excess emission from the impact was detected by SWAS and we derive an upper limit of 1.8×¹⁰⁷ kg on the water ice evaporated by the impact. However, the water production rate of the comet showed large natural variations of more than a factor of three during the weeks before and after the impact. Episodes of increased activity with alternated with periods with low outgassing (). We estimate that 9P/Tempel 1 vaporized a total of N∼4.5×¹⁰³⁴ water molecules (∼1.3×¹⁰⁹ kg) during June-September 2005. Our observations indicate that only a small fraction of the nucleus of Tempel 1 appears to be covered with active areas. Water vapor is expected to emanate predominantly from topographic features periodically facing the Sun as the comet rotates. We calculate that appreciable asymmetries of these features could lead to a spin-down or spin-up of the nucleus at observable rates.     

Placing the Deep Impact Mission into context: Two decades of observations of 9P/Tempel 1 from McDonald Observatory

We report on low-spectral resolution observations of Comet 9P/Tempel 1 from 1983, 1989, 1994 and 2005 using the 2.7 m Harlan J. Smith telescope of McDonald Observatory. This comet was the target of NASA's Deep Impact mission and our observations allowed us to characterize the comet prior to the impact. We found that the comet showed a decrease in gas production from 1983 to 2005, with the decrease being different factors for different species. OH decreased by a factor 2.7, NH by 1.7, CN by 1.6, C₃ by 1.8, CH by 1.4 and C₂ by 1.3. Despite the decrease in overall gas production and these slightly different decrease factors, we find that the gas production rates of OH, NH, C₃, CH and C₂ ratioed to that of CN were constant over all of the apparitions. We saw no change in the production rate ratios after the impact. We found that the peak gas production occurred about two months prior to perihelion. Comet Tempel 1 is a “normal” comet.     

Ground-based visible and near-IR observations of Comet 9P/Tempel 1 during the Deep Impact encounter

We present the results of our visible and near-IR observations of Comet 9P/Tempel 1 during the Deep Impact encounter. The comet was observed before, during, and after impact from Kitt Peak National Observatory (J, H, K) and Observatorio Astronómico Nacional-San Pedro Mártir, Mexico (B, V, R, I). High time-resolution images in R, J, H, and K the night of impact with a 3^.″5 radius aperture revealed a rapid brightening which had multiple slopes and lasted for approximately 25 min before leveling off. The brightness decreased on subsequent nights and returned to near pre-impact levels by July 8 UT. The R-J, R-H, R-K, J-H, J-K, and H-K colors became bluer the night of impact. The R-J, R-H, and R-K colors remained blue on the night after impact while the J-H, J-K, and H-K colors returned to baseline levels. The observed color changes suggest the bluening was due to an increase in small grains relative to the ambient coma, an increase in ice relative to refractory dust in the coma, or a combination of the two. The ejecta were initially directed towards the southwest but had been driven southeast by solar radiation pressure by the second night after impact. The mean projected ejecta velocity was estimated at 0.20-0.23 km s⁻¹ over the first 24 h after impact.     

Chandra observations of Comet 9P/Tempel 1 during the Deep Impact campaign

We present results from the Chandra X-ray Observatory's extensive campaign studying Comet 9P/Tempel 1 (T1) in support of NASA's Deep Impact (DI) mission. T1 was observed for ∼295 ks between 30th June and 24th July 2005, and continuously for ∼64 ks on July 4th during the impact event. X-ray emission qualitatively similar to that observed for the collisionally thin Comet 2P/Encke system [Lisse, C.M., Christian, D.J., Dennerl, K., Wolk, S.J., Bodewits, D., Hoekstra, R., Combi, M.R., Mäkinen, T., Dryer, M., Fry, C.D., Weaver, H., 2005b. Astrophys. J. 635 (2005) 1329-1347] was found, with emission morphology centered on the nucleus and emission lines due to C, N, O, and Ne solar wind minor ions. The comet was relatively faint on July 4th, and the total increase in X-ray flux due to the Deep Impact event was small, ∼20% of the immediate pre-impact value, consistent with estimates that the total coma neutral gas release due to the impact was 5×¹⁰⁶ kg (∼10 h of normal emission). No obvious prompt X-ray flash due to the impact was seen. Extension of the emission in the direction of outflow of the ejecta was observed, suggesting the presence of continued outgassing of this material. Variable spectral features due to changing solar wind flux densities and charge states were clearly seen. Two peaks, much stronger than the man-made increase due to Deep Impact, were found in the observed X-rays on June 30th and July 8th, 2005, and are coincident with increases in the solar wind flux arriving at the comet. Modeling of the Chandra data using observed gas production rates and ACE solar wind ion fluxes with a CXE mechanism for the emission is consistent, overall, with the temporal and spectral behavior expected for a slow, hot wind typical of low latitude emission from the solar corona interacting with the comet's neutral coma, with intermittent impulsive events due to solar flares and coronal mass ejections.     

Spectropolarimetry of the Deep Impact target Comet 9P/Tempel 1 with HiVIS

High resolution spectropolarimetry of the Deep Impact target, Comet 9P/Tempel 1, was performed during the impact event on July 4th, 2005 with the HiVIS spectropolarimeter and the AEOS 3.67-m telescope on Haleakala, Maui. We observed atypical polarization spectra that changed significantly in the few hours after the impact. The polarization of scattered light as a function of wavelength is very sensitive to the size and composition (complex refractive index) of the scattering particles as well as the scattering geometry. As opposed to most observations of cometary dust, which show an increase in the linear polarization with the wavelength (at least in the visible domain and for phase angles greater than about 30, a red polarization spectrum) observations of 9P/Tempel 1 at a phase angle of 41° beginning 8 min after impact and centered at 6:30 UT showed a polarization of 4% at 650 nm falling to 3% at 950 nm. The next observation, centered an hour later showed a polarization of 7% at 650 nm falling to 2% at 950 nm. This corresponds to a spectropolarimetric gradient, or slope, of −0.9% per 1000 Å 40 min after impact, decreasing to a slope of −2.3% per 1000 Å an hour and a half after impact. This is an atypical blue polarization slope, which became more blue 1 h after impact. The polarization values of 4 and 7% at 650 nm are typical for comets at this scattering angle, whereas the low polarization of 2 and 3% at 950 nm is not. We compare observations of Comet 9P/Tempel 1 to that of a typical comet, C/2004 Machholz, at a phase angle of 30° which showed a typical red slope, rising from 2% at 650 nm to 3% at 950 nm in two different observations (+1.0 and +0.9% per 1000 Å).     

The nucleus of Deep Impact target Comet 9P/Tempel 1

On UT 2000 August 21 we obtained simultaneous visible and mid-infrared observations of Comet 9P/Tempel 1, the target of the upcoming NASA Discovery Program mission Deep Impact. The comet was still quite active while 2.55 AU from the Sun (post-perihelion). Two independent analyses of our data, one parameterizing the coma morphology and the other modeling infrared spectrophotometry, show that the nucleus's cross section at the time the data were taken corresponds to an effective radius of 3.0±0.2 km. Based on visible-wavelength photometry of the comet taken during this observing run and others in the summer of 2000, all of which show the rotational modulation of the nucleus's brightness, we find that the infrared data were obtained near the maximum of the light curve. If we assume that the nucleus's light curve had a peak-to-valley range of 0.6±0.2 mag, then the mean effective radius is 2.6±0.2 km. Visible-wavelength photometry of the nucleus, including data published by other groups, lets us constrain the nucleus's R-band geometric albedo: 0.072±0.016. The nucleus's flux contributed about 85% of the light in the mid-infrared images.     

Observations of Comet 9P/Tempel 1 with the Keck 1 HIRES instrument during Deep Impact

We report high-spectral resolution observations of Comet 9P/Tempel 1 before, during and after the impact on 4 July 2005 UT of the Deep Impact spacecraft with the comet. These observations were obtained with the HIRES instrument on Keck 1. We observed brightening of both the dust and gas, but at different rates. We report the behavior of OH, NH, CN, C₃, CH, NH₂ and C₂ gas. From our observations, we determined a CN outflow velocity of at least 0.51 km s⁻¹. The dust color did not change substantially. To date, we see no new species in our spectra, nor do we see any evidence of prompt emission. From our observations, the interior material released by the impact looks the same as the material released from the surface by ambient cometary activity. However, further processing of the data may uncover subtle differences in the material that is released as well as the time evolution of this material.     

Observations of Comet 9P/Tempel 1 around the Deep Impact event by the OSIRIS cameras onboard Rosetta

The OSIRIS cameras on the Rosetta spacecraft observed Comet 9P/Tempel 1 from 5 days before to 10 days after it was hit by the Deep Impact projectile. The Narrow Angle Camera (NAC) monitored the cometary dust in 5 different filters. The Wide Angle Camera (WAC) observed through filters sensitive to emissions from OH, CN, Na, and OI together with the associated continuum. Before and after the impact the comet showed regular variations in intensity. The period of the brightness changes is consistent with the rotation period of Tempel 1. The overall brightness of Tempel 1 decreased by about 10% during the OSIRIS observations. The analysis of the impact ejecta shows that no new permanent coma structures were created by the impact. Most of the material moved with . Much of it left the comet in the form of icy grains which sublimated and fragmented within the first hour after the impact. The light curve of the comet after the impact and the amount of material leaving the comet ( of water ice and a presumably larger amount of dust) suggest that the impact ejecta were quickly accelerated by collisions with gas molecules. Therefore, the motion of the bulk of the ejecta cannot be described by ballistic trajectories, and the validity of determinations of the density and tensile strength of the nucleus of Tempel 1 with models using ballistic ejection of particles is uncertain.     

Swift ultraviolet photometry of the Deep Impact encounter with Comet 9P/Tempel 1

We report time-resolved imaging UV photometry of Comet 9P/Tempel 1 during the interval 2005 June 29-2005 July 21, including intensive coverage of the collision with the Deep Impact probe and its immediate aftermath. The nuclear flux of the comet begins to rise within minutes of the collision, and peaks about 3 h after impact. There is no evidence for a prompt flash at the time of impact. The comet exhibits a significant re-brightening about 40 h after the initial outburst, consistent with the rotation period of the comet, with evidence for further periodic re-brightenings on subsequent rotations. Modelling of the brightness profile of the coma as a function of time suggests two distinct velocity systems in the ejecta, at de-projected expansion speeds of 190 and 550 m/s, which we suggest are due to dust and gas, respectively. There is a distinct asymmetry in the slower-moving (dust) component as a function of position angle on the sky. This is confirmed by direct imaging analysis, which reveals an expanding plume of material concentrated in the impact hemisphere. The projected expansion velocity of the leading edge of this plume, measured directly from the imaging data, is 190 m/s, consistent with the velocity of the dust component determined from the photometric analysis. From our data we determine that a total of (1.4±0.2)×¹⁰³² water molecules were ejected in the impact, together with a total scattering area of dust at 300 nm of 190±20 km².     

Near-infrared light curve of Comet 9P/Tempel 1 during Deep Impact

On UT 2005 July 4 we observed Comet 9P/Tempel 1 during its encounter with the Deep Impact flyby spacecraft and impactor. Using the SpeX near-infrared spectrograph mounted on NASA's Infrared Telescope Facility, we obtained 0.8-to-2.5 μm flux-calibrated spectral light curves of the comet for 12 min before and 14 min after impact. Our cadence was just 1.1 s. The light curve shows constant flux before the impact and an overall brightening trend after the impact, but not at a constant rate. Within a 0.8-arcsec-radius circular aperture, the comet rapidly-brightened by 0.63 mag at 1.2 μm in the first minute. Thereafter, brightening was more modest, averaging about 0.091 mag/min at 1.2 μm, although apparently not quite constant. In addition we see a bluing in the spectrum over the post-impact period of about 0.07 mag in J-H and 0.35 mag in J-K. The majority of this bluing happened in the first minute, and the dust only marginally blued after that, in stark contrast to the continued brightening. The photometric behavior in the light curve is due to a combination of crater formation effects, expansion of the ejecta cloud, and evolution of liberated dust grains. The bluing is likely due to an icy component on those grains, and the icy grains would have had to have a devolatilization timescale longer than 14 min (unless they were shielded by the optical depth of the cloud). The bluing could also have been caused by the decrease in the “typical” size of the dust grains after impact. Ejecta dominated by submicron grains, as inferred from other observations, would have stronger scattering at shorter wavelengths than the much larger grains observed before impact.     

Gemini-N mid-IR observations of the dust properties of the ejecta excavated from Comet 9P/Tempel 1 during Deep Impact

We present mid-infrared spectra and images from the Gemini-N (+MICHELLE) observational campaign of Comet 9P/Tempel 1 before, during, and after its encounter with Deep Impact. We use our thermal grain model to probe the 10 μm properties of the dust grains in the coma of the comet. Before impact (3 July 2005 UT), and more than 24 h after impact (5, 16, and 28 July 2005 UT), the comet dust grains were composed mostly of amorphous olivine, and were relatively large (peak of the grain size distribution ). For the night of impact, we extract spectra by centering on the nucleus, and offset 1″ from the nucleus in the direction of the impact ejecta plume. We find small dust grains (∼0.2 μm) of a diverse mineralogy (amorphous olivine, amorphous pyroxene, amorphous carbon, and crystalline olivine) populating the ejecta. The submicron sized dust grains move faster than the other, larger grains (?0.7 μm), with amorphous olivine and amorphous carbon traveling together, and amorphous pyroxene and crystalline olivine dispersing at a similar rate. Deriving a velocity law from a time-of-flight analysis, we find that the material traveled with a velocity law scaled by and with a power of p=0.5. This velocity power-law requires a sustained release of grains for the duration of 45-60 min after impact. Since the mineral species are traveling at different speeds, and there was a sustained release of grains due to a possible “gas-plume,” we conclude that the different minerals did not originate from grain aggregates destroyed by the impact, but instead arise from an inhomogeneous nucleus.     

The light curve of the comet 9P/Tempel 1: Temporal evolution from 1867 till 2005

The light curves of the periodic comet 9P/Tempel 1 obtained during its apparitions in 1972, 1983, 1994, and 2005 have been constructed and studied. The values of the photometric parameters H ₀, n, and H ₁₀ have been determined for these apparitions; and secular variations of the comet’s brightness have been studied. The light curve of the comet obtained close to the moment of the artificial impact agrees well with the change in the production rate of water molecules. The presented results are important from the point of the possible change in the photometric parameters induced by the artificial impact and the long-term evolution of the cometary core activity.     

Collisions of comets and meteoroids: The post Stardust‐NExT discussion

The paper considers results of collisions between comets and meteoroids. We re‐discuss the five different approaches to estimate the sizes of holes created during such collisions. The results of the Deep Impact and the Stardust‐NExT missions to comet 9P/Temple 1 are applied to the estimation of these methods. We use the observed amount of ejected mass, the jump of brightness of the comet 9P/Tempel 1 as well as the diameter of the excavated crater. In the paper the simple way of estimation of impact consequences by use of the conception of the fragmentation energy of comet is also discussed. The numerical calculations were carried out for reasonable assumed values of a large range of cometary characteristics. The main conclusion of this paper confirms a general presumption that the main factor which determines the size of the impact crater on the comet 9P/Tempel 1 is the kinetic energy of impactor and strength or fragmentation energy of cometary material. In the considered case the gravitation of a comet has a minor meaning (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A crater and its ejecta: An interpretation of Deep Impact

We apply recently updated scaling laws for impact cratering and ejecta to interpret observations of the Deep Impact event. An important question is whether the cratering event was gravity or strength-dominated; the answer gives important clues about the properties of the surface material of Tempel 1. Gravity scaling was assumed in pre-event calculations and has been asserted in initial studies of the mission results. Because the gravity field of Tempel 1 is extremely weak, a gravity-dominated event necessarily implies a surface with essentially zero strength. The conclusion of gravity scaling was based mainly on the interpretation that the impact ejecta plume remained attached to the comet during its evolution. We address that feature here, and conclude that even strength-dominated craters would result in a plume that appeared to remain attached to the surface. We then calculate the plume characteristics from scaling laws for a variety of material types, and for gravity and strength-dominated cases. We find that no model of cratering alone can match the reported observation of plume mass and brightness history. Instead, comet-like acceleration mechanisms such as expanding vapor clouds are required to move the ejected mass to the far field in a few-hour time frame. With such mechanisms, and to within the large uncertainties, either gravity or strength craters can provide the levels of estimated observed mass. Thus, the observations are unlikely to answer the questions about the mechanical nature of the Tempel 1 surface.     

Deep Impact photometry of Comet 9P/Tempel 1

The photometric properties of the nucleus of Comet 9P/Tempel 1 are studied from the disk-resolved color images obtained by Deep Impact (DI). Comet Tempel 1 has typical photometric properties for comets and dark asteroids. The disk-integrated spectrum of the nucleus of Tempel 1 between 309 and 950 nm is linear without any features at the spectral resolution of the filtered images. At V-band, the red slope of the nucleus is 12.5±1% per 100 nm at 63° phase angle, translating to B-V=0.84±0.01, V-R=0.50±0.01, and R-I=0.49±0.02. No phase reddening is confirmed. The phase function of the nucleus of Tempel 1 is constructed from DI images and earlier ground-based observations found from the literature. The phase coefficient is determined to be β=0.046±0.007 mag/deg between 4° and 117° phase angle. Hapke's theoretical scattering model was used to model the photometric properties of this comet. Assuming a single Henyey-Greenstein function for the single-particle phase function, the asymmetry factor of Tempel 1 was fitted to be g=−0.49±0.02, and the corresponding single-scattering albedo (SSA) was modeled to be 0.039±0.005 at 550 nm wavelength. The SSA spectrum shows a similar linear slope to that of the disk-integrated spectrum. The roughness parameter is found to be 16°±8°, and independent of wavelength. The Minnaert k parameter is modeled to be 0.680±0.014. The photometric variations on Tempel 1 are relatively small compared to other comets and asteroids, with a ∼20% full width at half maximum of albedo variation histogram, and ∼3% for color. Roughness variations are evident in one small area, with a roughness parameter about twice the average and appearing to correlate with the complex morphological texture seen in high-resolution images.     

Pre-Impact Mid-IR and Optical Observations of Comet 9P/Tempel 1

Comet 9P/Tempel 1, the target of the Deep Impact mission, has been intensively observed for a long time period before the encounter. Pre-impact ground based monitoring of the comet was an important prerequisite for the success of the first space experiment in which a comet is treated by an artificial impact. It provided the background data needed to disentangle the features caused by the impact from variations caused by the natural activity of the comet. In this paper we present results from the ESO-monitoring of the comet, conducted in the thermal infrared and optical spectral ranges during several months before the Deep Impact encounter with the comet.     

Surface temperature of the nucleus of Comet 9P/Tempel 1

The Deep Impact (DI) spacecraft encountered Comet 9P/Tempel 1 on July 4th, 2005 and observed it with several instruments. In particular, we obtained infrared spectra of the nucleus with the HRI-IR spectrometer in the wavelength range of 1.0-4.9 μm. The data were taken before impact, with a maximum resolution of ∼120 m per pixel at the time of observation. From these spectra, we derived the first directly observed temperature map of a comet nucleus. The surface temperature varied from 272±7 to 336±7 K on the sunlit hemisphere, matching the surface topography and incidence angle. The derived thermal inertia is low, most probably <50 W K⁻¹ m⁻² s^1/2. Combined with other arguments, it is consistent with the idea that most of rapidly varying thermal physical processes, in particular the sublimation of volatiles around perihelion, should occur close to the surface. Thermal inertia is sufficient to explain the temperature map of the nucleus of Comet Tempel 1 to first order, but other physical processes like roughness and self-radiation are required to explain the details of the temperature map. Finally, we evaluated that the Standard Thermal Model is a good approximation to derive the effective radius of a cometary nucleus with an uncertainty lower than ∼10% if combined with a thermal infrared light curve.     

Hubble Space Telescope observations of Comet 9P/Tempel 1 during the Deep Impact encounter

We report on the Hubble Space Telescope program to observe periodic Comet 9P/Tempel 1 in conjunction with NASA's Deep Impact Mission. Our objectives were to study the generation and evolution of the coma resulting from the impact and to obtain wide-band images of the visual outburst generated by the impact. Two observing campaigns utilizing a total of 17 HST orbits were carried out: the first occurred on 2005 June 13-14 and fortuitously recorded the appearance of a new, short-lived fan in the sunward direction on June 14. The principal campaign began two days before impact and was followed by contiguous orbits through impact plus several hours and then snapshots one, seven, and twelve days later. All of the observations were made using the Advanced Camera for Surveys (ACS). For imaging, the ACS High Resolution Channel (HRC) provides a spatial resolution of 36 km (16 km pixel⁻¹) at the comet at the time of impact. Baseline images of the comet, made prior to impact, photometrically resolved the comet's nucleus. The derived diameter, 6.1 km, is in excellent agreement with the 6.0±0.2 km diameter derived from the spacecraft imagers. Following the impact, the HRC images illustrate the temporal and spatial evolution of the ejecta cloud and allow for a determination of its expansion velocity distribution. One day after impact the ejecta cloud had passed out of the field-of-view of the HRC.     

Persistent rings in and around Jupiter’s anticyclones – Observations and theory

We present observations and theoretical calculations to derive the vertical structure of and secondary circulation in jovian vortices, a necessary piece of information to ultimately explain the red color in the annular ring inside Jupiter’s Oval BA. The observations were taken with the near-infrared detector NIRC2 coupled to the adaptive optics system on the 10-m W.M. Keck telescope (UT 21 July 2006; UT 11 May 2008) and with the Hubble Space Telescope at visible wavelengths (UT 24 and 25 April 2006 using ACS; UT 9 and 10 May 2008 using WFPC2). The spatial resolution in the near-IR (∼0.1–0.15″ at 1–5 μm) is comparable to that obtained at UV–visible wavelengths (∼0.05–0.1″ at 250–890 nm). At 5 μm we are sensitive to Jupiter’s thermal emission, whereas at shorter wavelengths we view the planet in reflected sunlight. These datasets are complementary, as images at 0.25–1.8 μm provide information on the clouds/hazes in the troposphere–stratosphere, while the 5-μm emission maps yield information on deeper layers in the atmosphere, in regions without clouds. At the latter wavelength numerous tiny ovals can be discerned at latitudes between ∼45°S and 60°S, which show up as rings with diameters ?1000 km surrounding small ovals visible in HST data. Several white ovals at 41°S, as well as a new red oval that was discovered to the west of the GRS, also reveal 5-μm bright rings around their peripheries, which coincide with dark/blue rings at visible wavelengths. Typical brightness temperatures in these 5-μm bright rings are 225–250 K, indicative of regions that are cloud-free down to at least the ∼4 bar level, and perhaps down to 5–7 bar, i.e., well within the water cloud.Radiative transfer modeling of the 1–2 μm observations indicates that all ovals, i.e., including the Great Red Spot (GRS), Red Oval BA, and the white ovals at 41°S, are overall very similar in vertical structure. The main distinction between the ovals is caused by variations in the particle densities in the tropospheric–stratospheric hazes (2–650 mbar). These are 5–8 times higher above the red ovals than above the white ones at 41°S. The combination of the 5-μm rings and the vertical structure derived from near-IR data suggests anticyclones to extend vertically from (at least) the water cloud (∼5 bar) up to the tropopause (∼100–200 mbar), and in some cases into the stratosphere.Based upon our observations, we propose that air is rising along the center of a vortex, and descending around the outer periphery, producing the 5-μm bright rings. Observationally, we constrain the maximum radius of these rings to be less than twice the local Rossby deformation radius, L_R. If the radius of the visible oval (i.e., the clouds that make the oval visible) is >3000 km, our observations suggest that the descending part of the secondary circulation must be within these ovals. For the Red Oval BA, we postulate that the return flow is at the location of its red annulus, which has a radius of ∼3000 km.We develop a theory for the secondary circulation, where air is (baroclinically) rising along the center of a vortex in a subadiabatic atmosphere, and descending at a distance not exceeding ∼2× the local Rossby deformation radius. Using this model, we find a timescale for mixing throughout the vortex of order several months, which suggests that the chromophores that are responsible for the red color of Oval BA’s red annulus must be produced locally, at the location of the annulus. This production most likely results from the adiabatic heating in the descending part of the secondary circulation. Such higher-than-ambient temperature causes NH₃–ice to sublime, which will expose the condensation nuclei, such as the red chromophores.