Crustal properties of Mercury by morphometric analysis of multi‐ring basins on the Moon and Mars

Abstract— We use satellite altitude free‐air and terrain gravity correlations to differentiate regional variations in crustal viscosity and transient cavity diameters of impact basins on the Moon and Mars that we combine with surface roughness for a rheological assessment of the crust of Mercury. For the Moon and Mars, we separate the free‐air anomalies into terrain‐correlated and terrain‐decorrelated components using the spectral properties of the free‐air and computed terrain gravity effects. Adjusting the terrain effects for the terrain‐correlated anomalies yields compensated terrain effects that we evaluate for crustal thickness variations of the impact basins. We interpret the terrain‐correlated anomalies for uncompensated elements of the crustal thickness variations that we find are strongly correlated with the distribution of basin rings from photogeologic analyses. Hence, we estimate the transient cavity diameter from the innermost diameter of the gravity‐inferred rings. Comparing these diameters with the related crustal thickness estimates clearly differentiates regional variations in the crustal rheologies. For the Moon, the analysis points to a farside crust that was significantly more rigid than the nearside crust during bombardment time. For Mars, the growth in transient cavity diameters with apparent crustal age also reflects increased viscosity due to crustal cooling. These results are also consistent with local estimates of surface roughness developed from the root‐mean‐squared topography over 64 times 64° patches centered on the basins. Hence for Mercury where gravity observations are lacking, rheological inferences on its crust may result from comparing photometric estimates of transient cavity diameter and local surface roughness with the lunar and martian estimates. These results for the Beethoven Basin, a typical multi‐ring impact feature of Mercury, suggest that the viscosity of the mercurian crust was relatively great during bombardment time. This enhanced rigidity, despite crustal temperatures that were probably much hotter than those of the Moon and Mars, may reflect an extremely dry crust for Mercury in its early development.     

Did a large impact reorient the Moon?

The Moon is currently locked in a spin–orbit resonance of synchronous rotation, of which one consequence is that more impacts should occur near the Moon's apex of motion (0° N, 90° W) than near its antapex of motion (0° N, 90° E). Several of the largest lunar impact basins could have temporarily unlocked the Moon from synchronous rotation, and after the re-establishment of this state the Moon would have been left in either its initial orientation, or one that was rotated 180° about its spin axis. We show that there is less than a 2% probability that the oldest lunar impact basins are randomly distributed across the lunar surface. Furthermore, these basins are preferentially located near the Moon's antapex of motion, and this configuration has less than a 0.3% probability of occurring by chance. We postulate that the current “near side” of the Moon was in fact its “far side” when the oldest basins formed. One basin with the required size and temporal characteristics to account for a 180° reorientation is the Smythii basin.     

A Large Basin on the Near Side of the Moon

The differences between the surface structure of the near side and the far side of the Moon have been topics of interest ever since photographs of the far side have been available. One recurrent hypothesis is that a large impact on the near side has deposited ejecta on the far side, resulting in thicker crust there. Specific proposals were made by P.H. Cadogan for the Gargantuan Basin and by E.A. Whitaker for the Procellarum Basin. Despite considerable effort, no consensus has been reached on the existence of these basins. The problem of searching for such a basin is one of finding its signature in a somewhat chaotic field of basin and crater impacts. The search requires a model of the topographic shape of an impact basin and its ejecta field. Such a model is described, based on elevation data of lunar basins collected by the Lidar instrument of the Clementine mission and crustal thickness data derived from tracking Clementine and other spacecraft. The parameters of the model are scaled according to the principles of dimensional analysis and isostatic compensation in the early Moon. The orbital dynamics of the ejecta and the curvature of the Moon are also taken into account. Using such a scaled model, a search for the best fit for a large basin led to identification of a basin whose cavity covers more than half the Moon, including the area of all of the impact basins visible on the near side. The center of this basin is at 22 degrees east longitude and 8.5 degrees north latitude and its average radius is approximately 3,160 km. It is a megabasin, a basin that contains other basins (the far side South Pole-Aitken Basin also qualifies for that designation). It has been called the Near Side Megabasin. Much of the material ejected from the basin escaped the Moon, but the remainder formed an ejecta blanket that covered all of the far side beyond the basin rim to a depth of from 6 to 30 km. Isostatic compensation reduced the depth relative to the mean surface to a range of 1–5 km, but the crustal thickness data reveals the full extent of the original ejecta. The elevation profile of the ejecta deposited on the far side, together with modification for subsequent impacts by known basins (especially the far side South Pole-Aitken Basin) matches the available topographic data to a high degree. The standard deviation of the residual elevations (after subtracting the model from the measured elevations) is about one-half of the standard deviation of the measured elevations. A section on implications discusses the relations of this giant basin to known variations in the composition, mineralogy, and elevations of different lunar terranes.     

Measurements of the elastic thickness under ancient lunar terrain

The part of a planet's gravity that is coherent with its topography provides information about the deflection of its crust after loading, and hence the resistance of its lithosphere to bending at the time the load was emplaced. We used observed line of sight accelerations from Lunar Prospector, together with the accelerations we would have expected if anomalies in the gravity field were only caused by topography, to estimate the admittance and coherence between topography and gravity over several regions of the lunar nearside. We then compared our estimates to what we would expect if the lithosphere behaved as a floating elastic plate or shell, assuming a linear relationship between topography and gravity. We found in the region surrounding the southern highland crater Clavius that the data can be modeled using a thin plate with Te=12±5 km and uncorrelated loads at the surface and base of the upper crust. A spherical shell model with surface loading is less satisfactory: to fit the admittance adequately requires topography with wavelengths over 400 km to be formed when Te≈ 1 km and the remainder when Te≈7.5 km. By contrast, the apparent lack of compensation around the youngest giant impact basins requires a plate with Te>80 km or a shell with Te>25 km. Our results indicate the thickness of the lunar lithosphere increased from ≈12 km in the pre-Nectarian to >25 km in the Nectarian.     

The strength of the lunar lithosphere

A self-gravitating, elastic, spherical thick shell model is used to derive the present state of the lateral variations of density and stress differences within the lunar lithosphere. The model is allowed to deform under the load of an initial surface topography and internal density distribution, such that the resulting deformed body gives rise to the observed surface topography and gravity specified by the spherical harmonics of degree up to 70. Two main models are considered, Model A and Model B, with elastic lithospheres of thickness 300 and 210 km, respectively. Model A displays density perturbations of generally less than ±200 kg/m³ within the crustal layers, reducing rapidly to less than ±20 kg/m³ at the base of the lithosphere. The density perturbations in Model B are similar in the crust and marginally higher at the base of the lithosphere. The major stress differences in the mantle are associated with the mascon basins and are found to reach maximums of 8-10 MPa within the lower lithosphere (150-270 km) of Model A and maximums of 12-16 MPa at 150 to 180 km depth for Model B. A moderate correlation exists between the modeled stress distributions and shallow moonquake epicenters. However, the overall results of this study imply that other remnant stresses, due to processes other than density perturbations, exist and play a critical role in the large shallow moonquakes.     

The scientific rationale for the C1XS X-ray spectrometer on India's Chandrayaan-1 mission to the moon

The UK-built Chandrayaan-1 X-ray Spectrometer (C1XS) will fly as an ESA instrument on India's Chandrayaan-1 mission to the Moon, launched in October 2008. C1XS builds on experience gained with the earlier D-CIXS instrument on SMART-1, but will be a scientifically much more capable instrument. Here we describe the scientific objectives of this instrument, which include mapping the abundances of the major rock-forming elements (principally Mg, Al, Si, Ti, Ca and Fe) in the lunar crust. These data will aid in determining whether regional compositional differences (e.g., the Mg/Fe ratio) are consistent with models of lunar crustal evolution. C1XS data will also permit geochemical studies of smaller scale features, such as the ejecta blankets and central peaks of large impact craters, and individual lava flows and pyroclastic deposits. These objectives all bear on important, and currently unresolved, questions in lunar science, including the structure and evolution of any primordial magma ocean, as revealed by vertical and lateral geochemical variations in the crust, and the composition of the lunar mantle, which will further constrain theories of the Moon's origin, thermal history and internal structure.     

Rayleigh-Taylor instability as a mechanism for corona formation on Venus

In this study we explore the idea that coronae have formed on Venus as a result of gravitational (Rayleigh-Taylor) instability of the lithosphere. The lithosphere is represented by a system of stratified homogeneous viscous layers (low-density crust over high density mantle, over lower density layer beneath the lithosphere). A small harmonic perturbation imposed on the base of the lithosphere is observed to result in gravitational instability under the constraint of assumed axisymmetry. Topography develops with time under the influence of dynamic stress associated with downwelling or upwelling, and spatially variable crustal thickening or thinning. Topography may therefore be elevated or depressed above a mantle downwelling, but the computed gravity anomaly is always negative above a mantle downwelling in a homogeneous asthenosphere. The ratio of peak gravity to topography anomaly depends primarily on the ratio of crust to lithospheric viscosity. Average observed ratios are well resolved for two groups of coronae (∼40 mgal km⁻¹), consistent with models in which the crust is perhaps 5 times stronger than the lithosphere. Group 3a (rim surrounding elevated central region) coronae are inferred to arise from a central upwelling model, whereas Group 8 (depression) coronae are inferred to arise from central downwelling. Observed average coronae radii are consistent with a lithospheric thickness of only 50 km. An upper low-density crustal layer is 10-20 km thick, as inferred from the amplitude of gravity and topography anomalies.     

Magma source transition of lunar mare volcanism at 2.3 Ga

Mare basalts provide insights into the composition and thermal history of the lunar mantle. The ages of mare basalts suggest a first peak of magma activity at 3.2–3.8 Ga and a second peak at ~2 Ga. In this study, we reassess the correlation between the titanium contents and the eruption ages of mare basalt units using the compositional and chronological data updated by SELENE (Kaguya). Using morphological and geological criteria, we calculated the titanium content of 261 mare units across a representative area of each mare unit. In the Procellarum KREEP Terrane, where the latest eruptions are located, an increase in the mean titanium content is observed during the Eratosthenian period, as reported by previous studies. We found that the increase in the mean titanium content occurred within a relatively short period near approximately 2.3 Ga, suggesting that the magma source of the mare basalts changed at this particular age. Moreover, the high‐titanium basaltic eruptions are correlated with a second peak in volcanic activity near ~2 Ga. The high‐titanium basaltic eruptions occurring during the last volcanic activity period can be explained by the three possible scenarios (1) the ilmenite‐bearing cumulate rich layer in the core‐mantle boundary formed after the mantle overturn, (2) the basaltic material layers beneath the lunar crust formed through upwelling magmas, and (3) ilmenite‐bearing cumulate blocks remained in the upper mantle after the mantle overturn.     

Formation of lunar mare domes along crustal fractures: Rheologic conditions, dimensions of feeder dikes, and the role of magma evolution

In this study we examine a set of lunar mare domes located in the Hortensius/Milichius/T. Mayer region and in northern Mare Tranquillitatis with respect to their formation along crustal fractures, their rheologic properties, the dimensions of their feeder dikes, and the importance of magma evolution processes during dome formation. Many of these domes display elongated summit vents oriented radially with respect to major impact basins, and several dome locations are also aligned in these preferential directions. Analysis of Clementine UV/VIS and Lunar Prospector gamma ray spectrometer data reveals that the examined mare domes formed from low-Si basaltic lavas of high FeO and low to moderate TiO₂ content. Based on their morphometric properties (diameter, height, volume) obtained by photoclinometric and shape from shading analysis of telescopic CCD images, we derive rheologic quantities (lava viscosity during eruption, effusion rate, duration of the effusion process, magma rise speed) and the dimensions of the feeder dikes. We establish three rheologic groups characterised by specific combinations of rheologic properties and dike dimensions, where the most relevant discriminative parameter is the lava viscosity η. The first group is characterised by and contains the domes with elongated vents in the Milichius/T. Mayer region and two similar domes in northern Mare Tranquillitatis. The second group with comprises the very low aligned domes in northern Mare Tranquillitatis, and the third group with the relatively steep domes near Hortensius and in the T. Mayer region. The inferred dike dimensions in comparison to lunar crustal thickness data indicate that the source regions of the feeder dikes are situated within the upper crust for six of the domes in northern Mare Tranquillitatis, while they are likely to be located in the lower crust and in the upper mantle for the other examined domes. By comparing the time scale of magma ascent with the time scale on which heat is conducted from the magma into the host rock, we find evidence that the importance of magma evolution processes during ascent such as cooling and crystallisation increases with lava viscosity. We conclude that different degrees of evolution of initially fluid basaltic magma are able to explain the broad range of lava viscosities inferred for the examined mare domes. The spectral data reveal that differences in TiO₂ content may additionally account for the systematic difference in lava viscosity between the two examined lunar regions. We show that the described mechanisms are likely to be valid also for other lunar mare domes situated near Cauchy and Arago, regarded for comparison. On the other hand, we find for the Gruithuisen and Mairan highland domes that despite their inferred high lava viscosities of , no significant magma cooling in the dike occurred during ascent, supporting previous findings that the highland domes were formed during a specific phase of non-mare volcanism by highly silicic viscous lavas.     

Geology and stratigraphy of King crater, lunar farside

Clementine and photographic data sets have been used to investigate the crustal stratigraphy and geology of King crater on the lunar farside (120°E, 5.5°N). Pre-existing topographic regimes or stress fields dominate many structures in the crater, which has excavated materials from depths of up to 14 km. The upper crust in the area is noritic anorthosite, grading to a more anorthositic signature with depth. A possible batholithic intrusion is also present in a 15-km-wide band, extending from the southern crater floor to at least 50 km north of King, and from near-surface levels down to at least the excavation depth of the crater. It is generally feldspathic, but is cut by mafic dykes now visible in the north wall. King also shows evidence for the presence of a cryptomare, exposed in regions of the peaks and in dark halo craters within the ejecta blanket. Localized olivine-bearing mineralogies are observed on the central peaks, suggesting isolated pockets of troctolitic mineralogies to have been present at 8- to 14-km depths. Copious volumes of crystalline melt produced from the impact event cover King’s floor to a maximum thickness of 30-60 m, and have pooled in a number of natural depressions outside of the main crater. The main pool in the pre-existing A1-Tusi crater has a minimum depth of 150 m. Domes on the crater floor are verified as nonvolcanic in origin, and did not act as a source for any of the lava-like materials in King.     

The stress state of Venusian crust and variations of its thickness: Implication for tectonics and geodynamics

The data obtained for the heights of the relief and the external gravitational field of Venus for spherical harmonics with degree and order up to 18 allow one to start theoretical analysis of the crust-mantle boundary (Venusian Moho) and stress state of the planetary interior. We suppose that Venusian convection is confined by floating massive crust. Apparently the convection in the upper mantle of Venus is separated from that one in the lower mantle and its lateral scale must be essentially smaller than on Earth. So, the convection is reflected to a larger degree of the gravitational field of the planet than for Earth. The spherical harmonic expansion of the topography for Venus correlates with corresponding expansion of the non-equilibrium part of the gravitational potential for n = 3–18. At the same time the relief of Venus is significantly compensated. It is reasonable to suppose that the gravity field for these harmonics is due to crustal thickness variations and, probably, to variations of crustal density. Thus, in the proposed scheme the Moho's relief causes the partial isostatic compensation of the topography.All calculations are carried out for the series of realistic models of Venus taking into consideration an asthenosphere. The asthenosphere is modeled either by a weakened (shear modulus is reduced), or by a liquid inviscid layer. We also suppose that the asthenosphere extends from the base of crust to a depth of 418 km, and the density contrast across the Moho boundary is –0.4 g * cm^–3. If the actual density contrast across the Moho is less than the supposed one by some factor, then one must increase the amplitudes of the roots and inverse roots by the same factor. The results for the Moho's relief and stresses in the crust are presented for the case of the mean thickness of the crust of 50 km, which satisfies the probable upper (connected with phase transitions in waterless basalts) and lower (appearing in the framework of our interpretation) limits.On the whole, the crust-mantle boundary on Venus is evidently smooth, and the stress level in the crust is appreciably smaller than the crustal stresses on the Earth. The strong sensitivity of the stresses character to the parameters of the model of external layers of Venus together with geological data allow us to begin a preliminary investigation of the tectonical structure and geodynamics of the planet.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Integration and Comparison of Clementine and Lunar Prospector Data: Global Scale Multielement Analysis1 (Fe,Ti, and Th) of the Lunar Surface

In this paper, we present (1) a statistical analysis, based on a systematic clustering method, of a dataset integrating the global abundance maps of the three elements iron, titanium, and thorium derived from Clementine and Lunar Prospector and (2) a comparison of iron abundances between Clementine and Lunar Prospector. Homogeneous geologic units are compositionally characterized and spatially defined in relation to the major rock types sampled on the Moon. With the lowest abundances of Fe, Ti, and Th found on the Moon, the lunar highland terrains are quite homogeneous with two major large feldspathic units, one being slightly more mafic than the other. Two distinct regions with unique compositions are unambiguously identified: the Procellarum KREEP Terrane (PKT) and the South Pole–Aitken (SPA). The PKT, which includes all the units with Th abundances higher than 3.5 ppm (KREEP-rich materials), is delimited by an almost continuous ringlike unit. In particular, it includes the western nearside maria, except for Mare Humorum. With concentrations in Fe, Ti, and Th enhanced relative to the surrounding highlands, the South Pole–Aitken basin floor represents a large mafic anomaly on the far side, suggesting wide deposits of lower crust and possible mantle materials. However, due to indirect residual latitude effects in the CSR (Clementine spectral reflectance) measurements, iron abundances might have been overestimated in SPA, thus implying that crustal materials, rather than mantle materials, might represent the dominant contributor to the mafic component exposed on the basin floor.     

Lunar crustal density profile from an analysis of doppler gravity data

Low altitude line-of-sight gravity data obtained by CSM and LM radio tracking during several Apollo missions are used to construct an equispaced normalized vertical gravity net 30 km above selected lunar highland regions. Correlation of local vertical gravity anomalies with craters of different depth reveals a density increase with depth in the upper lunar highland crust. Crustal densities determined in this fashion are in good agreement with other, previously published crustal density values. The nature of the density increase implies a lunar crust consisting of fractured rather than competent rock.     

Tectonic pattern of mare ridges of the letronne-montes riphaeus region of the Moon

A structural analysis is presented of mare ridges in an area of about 360000 km² in the southeastern part of Oceanus Procellarum just north of Mare Humorum.Mare ridges can be regarded as the result of large-scale natural tectonic deformation experiments coupled with and extended by volcanic phenomena. The old lunar crust has evidently retained part of the Moon's original tectonic elements throughout major exo- and endogenic events. Those structures which in places were flooded by mare lavas were also the first flaws to yield and to extend during younger tectonic and volcanic activity. Linear mare ridges may thus have formed at the activated and re-activated junctures of lunar crustal plates.Implications for the tectonics of mare ridges evidently show that one global stress field cannot account for all lunar tectonics but that global and areal variations in the lunar stress system have probably occurred.     

High‐pressure metamorphic mineralogy of the Martian crust with implications for density and seismic profiles

Here, we calculate the mineralogy of the Martian lower crust and upper mantle as a function of pressure and temperature with depth using four bulk compositions (average crust, Gusev basalt, olivine‐phyric shergottite, and primitive average mantle). We then use this mineralogy to extract rock properties such as density and seismic velocities, describe their changes with varying conditions and geotherms, and make predictions for the crust–mantle boundary. Mineralogically, all compositions produce garnet, orthopyroxene, clinopyroxene in varying proportions at high pressures, with differences in minor minerals (spinel, ilmenite, rutile, and/or K‐feldspar). According to our calculations, the average crust and Gusev basalt compositions have the potential to yield higher densities than the average mantle composition, particularly for thicker crusts and/or colder geotherms. Therefore, recycling of the Martian crust into the mantle could occur through the process of crustal delamination, if not kinetically inhibited. However, our results show that, depending on crustal thickness, the crust may not be easily distinguishable from the mantle in seismic properties.     

The great-circle pattern of large circular maria: product of an earth-moon encounter

The circular maria - Orientale, Imbrium, Serenitatis, Crisium, Smythii, and Tsiolkovsky -lie nearly on a lunar great circle. This pattern can be considered the result of a very close, non-capture encounter between Moon and Earth early in solar-system history. Of critical importance in analyzing the effects of such an encounter is the position of the weightlessness limit of the Earth-Moon System which is located at about 1.63R _e, measured from the center of Earth to center of Moon. Within this weightlessness limit, material can be pulled from the lunar surface and interior by Earth's gravity and either escape from the Moon or be redistributed onto the lunar surface. In the case of an encounter with a non-spinning Moon, backfalling materials would be distributed along a lunar great circle. However, if the Moon is rotating during the encounter, the backfall pattern will deviate from the great circle, the amount depending on the rate and direction of spin. Such a close encounter model may be related to the pattern of circular maria if materials departing from the source region are visualized as spheroids of molten lunar upper mantle basalt. These spheroids, then, would impact onto the lunar surface to form a pattern of lava lakes. Radiometric dates from mare rocks are consistent with this model of mare formation if the older mare rock dates are considered to date the encounter and younger dates are considered to date subsequent volcanic eruptions on a structurally weakened Moon.     

Antipodal effects of lunar basin-forming impacts: Initial 3D simulations and comparisons with observations

3D simulations of basin-scale lunar impacts are carried out to investigate: (a) the origins of strong crustal magnetic fields and unusual terrain observed to occur in regions antipodal to young large basins; and (b) the origin of enhanced magnetic and geochemical anomalies along the northwest periphery of the South Pole-Aitken (SPA) basin. The simulations demonstrate that a basin-forming impact produces a massive, hot, partially ionized cloud of vapor and melt that expands thermally around the Moon, converging near the basin antipode approximately 1 h after the impact for typical impact parameters. In agreement with previous work, analytic calculations of the interaction of this vapor-melt cloud with an initial ambient magnetic field predict a substantial temporary increase in field intensity in the antipodal region. The time of maximum field amplification coincides with a period when impacting ejecta also converge near the antipode. The latter produce antipodal shock stresses within the range of 5-25 GPa where stable shock remanent magnetization (SRM) of lunar soils has been found experimentally to occur. Calculated antipodal ejecta thicknesses are only marginally sufficient to explain the amplitudes of observed magnetic anomalies if mean magnetization intensities are comparable to those produced experimentally. This suggests that pre-existing ejecta materials, which would also contain abundant metallic iron remanence carriers, may be important anomaly sources, a possibility that is consistent with enhanced magnetic anomalies observed peripheral to SPA. The latter anomalies may be produced by amplified secondary ejecta impact shock waves in the thick SPA ejecta mantle occurring near the antipodes of the Imbrium and Serenitatis impacts. Together with converging seismic compressional waves, these antipodal impact shocks may have produced especially deep fracture zones along the northwest edge of SPA near the Imbrium antipode, allowing the ascent of magma with enhanced KREEP concentrations.     

Crustal recycling, mantle dehydration, and the thermal evolution of Mars

We have reinvestigated the coupled thermal and crustal evolution of Mars taking new laboratory data concerning the flow behavior of iron-rich olivine into account. The low mantle viscosities associated with the relatively higher iron content of the martian mantle as well as the observed high concentrations of heat producing elements in a crust with a reduced thermal conductivity were found to promote phases of crustal recycling in many models. As crustal recycling is incompatible with an early separation of geochemical reservoirs, models were required to show no episodes of crustal recycling. Furthermore, admissible models were required to reproduce the martian crust formation history, to allow for the formation of partial melt under present day mantle conditions and to reproduce the measured concentrations of potassium and thorium on the martian surface. Taking dehydration stiffening of the mantle viscosity by the extraction of water from the mantle into account, we found that admissible models have low initial upper mantle temperatures around 1650 K, preferably a primordial crustal thickness of 30 km, and an initially wet mantle rheology. The crust formation process on Mars would then be driven by the extraction of a primordial crust after core formation, cooling the mantle to temperatures close to the peridotite solidus. According to this scenario, the second stage of global crust formation took place over a more extended period of time, waning at around 3500 Myr b.p., and was driven by heat produced by the decay of radioactive elements. Present-day volcanism would then be driven by mantle plumes originating at the core-mantle boundary under regions of locally thickened, thermally insulating crust. Water extraction from the mantle was found to be relatively efficient and close to 40% of the total inventory was lost from the mantle in most models. Assuming an initial mantle water content of 100 ppm and that 10% of the extracted water is supplied to the surface, this amount is equivalent to a 14 m thick global surface layer, suggesting that volcanic outgassing of H₂O could have significantly influenced the early martian climate and increased the planet’s habitability.     

Origin of the Earth's ocean basins

The Earth's original ocean basins are proposed to be mare-type basins produced 4 billion y.a. by the flux of asteroid-sized objects responsible for the lunar mare basins. Scaling upward from the observed number of lunar basins for the greater capture cross-section and impact velocity of the Earth indicates that at least 50% of an original global crust would have been converted to basin topography. These basins were flooded by basaltic liquids in times short compared to the isostatic adjustment time for the basin. The modern crustal dichotomy (60% oceanic, 40% continental crust) was established early in the history of the Earth, making possible the later onset of plate tectonic processes. These later processes have subsequently reworked, in several cycles, principally the oceanic parts of the Earth's crust, changing the configuration of the continents in the process. Ocean basins (and oceans themselves) may be rare occurences on planets in other star systems.     

The early martian evolution—Constraints from basin formation ages

Impact basin formation ages give insight into the early evolution of a planet. The martian basins Hellas, Isidis and Argyre provide an important time-marker for the cessation of the magnetic dynamo and the crustal thickness distribution, both established before 4 Ga ago. No martian surfaces are older than 4.15 Ga based on crater count statistics, and all are younger than the oldest lunar ones. I show that the heavy bombardment period on the Moon and Mars evolved similarly, but endogenic processes have removed the oldest martian basin record. The basin-forming projectile population appears to be different from the impactor population observed today in the inner Solar System. It is yet uncertain whether the heavy bombardment period is cataclysmic or characterized by the decaying flux of planetary formation.