Hydrogeological characterization of aquifer in palla flood plain of Delhi using integrated approach

The Yamuna flood plains spread across the northern part of Indian subcontinent is home to millions of people. The ever-growing population in these plains make it difficult to sustain the demand of freshwater resources. However, the productive aquifers of flood plains could provide solution for these issues. In this context, it is necessary to understand the aquifer characteristics. Thus, the paper attempts to characterize the aquifer in Palla area of the flood plain using integrated approach. Besides, grain size analysis and site-litholog study, the nature of aquifer material was also ascertained from bulk mineralogy of the sediments using X-Ray Diffraction. The aquifer parameters were estimated with help of long duration pumping test data. Moreover, the effect of pumping on salinity variation and hydrochemical facies evolution was also examined. The sand dominant, unconfined aquifer was estimated to have horizontal hydraulic conductivity in the range of 25 m/day and vertical hydraulic conductivity of 6–7 m /day. While the specific yield of the aquifer was estimated in the range of 0.07–0.08. It is observed that under conducive active flood plain environment, the given sand mineralogy at the site does not allow salinity increase in groundwater even after more than a decade of groundwater pumping. In fact, over years, hydrochemical facies have evolved towards Bicarbonate type. These things put together make the active flood plain aquifer a sustainable groundwater resource.     

Hydrogeological behaviour of some fault zones in a carbonate aquifer of Southern Italy: an experimentally based model

Complex flow circulation patterns are likely to be present in fault‐controlled groundwater flow systems, such as carbonate aquifers. Nevertheless, not much information is available for faults in carbonates, and their hydrogeological behaviour is often neglected in conceptual and numerical models. The understanding of this aspect of subsurface fluid flow has been improved in a carbonate aquifer, where hydrogeological investigations at site scale demonstrated the existence of fault zones that act as barriers. The hydraulic conductivity of the fault core is as low as that of siliciclastic rocks that represent the regional aquitard of the carbonate aquifer. Despite the lower permeability, the fault zones allow a significant groundwater flowthrough and a good interdependence of piezometric heads upgradient and downgradient of the faults. Because of this discontinuous heterogeneity, the aquifer looks like a basins‐in‐series system, where seasonal springs can be detected along some fault zones, as a function of groundwater level fluctuations.     

A geophysical and geochemical approach for seawater intrusion assessment in the Acquedolci coastal aquifer (Northern Sicily)

Vertical electrical sounding (VES’) surveys and chemical analyses of groundwater have been executed in the coastal plain of Acquedolci (Northern Sicily), with the aim to circumscribe seawater intrusion phenomena. This urbanized area is representative of a more general problem interesting most of Mediterranean littoral areas, where intensive overdraft favors a heavy seawater intrusion through the coastline. Aquifer resistivity seems decisively to be conditioned by the chlorine and magnesium content in the main aquifer of the region. Schlumberger VES’, together with piezometric and chemical–physical information of groundwater, allowed us to perform hydrogeological and geophysical elaborations, to propose the occurrence of a relatively narrow belt marked by fresh–salt water mixing. In the considered plain, pollution risk studies have been already realized by authors with the proposal to identify—by parametric and synthetic zoning of significant hydrogeological elements—the most vulnerable sectors. In detail, an intrinsic vulnerability mapping has been already performed, applying the well-known SINTACS system. This paper intends to give—in this sector of Sicily—an example of integration of different methodologies, showing the role of geophysics to describe the degradation of aquifers on the whole as well as to assess their pollution risk better.     

Impacts of at-site wastewater disposal systems on the groundwater aquifer in arid regions: case of Sfax City, Southern Tunisia

Groundwater in Sfax City (Tunisia) has been known since the beginning of the century for its deterioration in quality, as a result of wastewater recharge into the aquifer. An average value of 12 × 10⁶ m³ of untreated wastewater reaches the groundwater aquifer each year. This would result not only in a chemical and biological contamination of the groundwater, but also in an increase of the aquifer piezometric level. Quantitative impacts were evaluated by examining the groundwater piezometric level at 57 surface wells and piezometers. The survey showed that, during the last two decades, the groundwater level was ever increasing in the urban area with values reaching 7 m in part; and decreasing in Sidi Abid (agricultural area) with values exceeding −3 m. Groundwater samples for chemical and microbial analysis were collected from 41 wells spread throughout the study area. Results showed significantly elevated levels of sodium, chlorides, nitrates and coliform bacteria all over the urban area. High levels (NO₃: 56–254 mg/l; Na >1,500 mg/l; Coliforms >30/100 ml) can be related to more densely populated areas with a higher density of pit latrine and recharge wells. Alternatively results showed a very variable chemical composition of groundwater, e.g. electrical conductivity ranges from 4,040 to19,620 μs/cm and the dry residual varies between 1.4 and 14 g/l with concentrations increasing downstream. Furthermore a softening of groundwater in Set Ezzit (highly populated sector) was observed.     

Hydrogeological properties of fault zones in a karstified carbonate aquifer (Northern Calcareous Alps,Austria)

This study presents a comparative, field-based hydrogeological characterization of exhumed, inactive fault zones in low-porosity Triassic dolostones and limestones of the Hochschwab massif, a carbonate unit of high economic importance supplying 60 % of the drinking water of Austria’s capital, Vienna. Cataclastic rocks and sheared, strongly cemented breccias form low-permeability (<1 mD) domains along faults. Fractured rocks with fracture densities varying by a factor of 10 and fracture porosities varying by a factor of 3, and dilation breccias with average porosities >3 % and permeabilities >1,000 mD form high-permeability domains. With respect to fault-zone architecture and rock content, which is demonstrated to be different for dolostone and limestone, four types of faults are presented. Faults with single-stranded minor fault cores, faults with single-stranded permeable fault cores, and faults with multiple-stranded fault cores are seen as conduits. Faults with single-stranded impermeable fault cores are seen as conduit-barrier systems. Karstic carbonate dissolution occurs along fault cores in limestones and, to a lesser degree, dolostones and creates superposed high-permeability conduits. On a regional scale, faults of a particular deformation event have to be viewed as forming a network of flow conduits directing recharge more or less rapidly towards the water table and the springs. Sections of impermeable fault cores only very locally have the potential to create barriers.     

Assessing seasonal variations and aquifer vulnerability in coastal aquifers of semi-arid regions using a multi-tracer isotopic approach: the case of Grombalia (Tunisia)

The Grombalia aquifer (NE Tunisia) is an example of an important source of water supply for regional and national development, where the weak controls over abstraction, fertilizer application and waste disposal, coupled with limited knowledge of aquifer dynamics, is causing aquifer over-exploitation and water quality degradation. Assessing the key role of groundwater in water-resources security is therefore of paramount importance to support new actions to preserve water quality and quantity in the long-run. This study presents one of the first investigations targeted at a complete assessment of aquifer dynamics in the Grombalia aquifer. A multi-tracer hydrogeochemical and isotopic (δ²H, δ¹⁸O and ³H) approach was used to study the influence of seasonal variation on piezometric levels, chemical and isotopic compositions, and groundwater recharge. A total of 116 samples were collected from private wells and boreholes during three periods in a 1 year monitoring campaign (February–March 2014, September 2014 and February 2015). Results revealed the overall unsuitability of groundwater for drinking and irrigation purposes (NO₃?>?50 mg/L in 51% of the wells; EC >1,000 μS/cm in 99% of the wells). Isotopic balance coupled to piezometric investigation indicated the contribution of the shallow aquifer to deep groundwater recharge. The study also revealed the weakness of ‘business as usual’ management practices, highlighting possible solutions to tackle water-related challenges in the Grombalia region, where climate change, population growth and intensive agricultural activities have generated a large gap between demand and available water reserves, hence becoming a possible driver for social insecurity.     

Hydrogeological framework and estimation of aquifer hydraulic parameters using geoelectrical data: a case study from West Iran

Detailed local geological, geophysical, and hydrogeological investigations were carried out for the alluvial aquifer in the Kangavar basin, West Iran to delineate the architecture of different subsurface geological horizons using lithologs and generated vertical electrical sounding (VES) data. An attempt has also been made to estimate aquifer transmissivity from resistivity data. Forty VESs were recorded with the Schlumberger electrode configuration in the study area; 28 of these were selected for evaluation. The maximum current electrode spacing was 400–500 m. The data obtained were interpreted by computer iterative modeling with curve matching for calibration purposes. In order to ascertain the subsurface geological framework, the general distribution of resistivity responses of the geological formations was obtained and geoelectrical sections along a number of lines were prepared. Probable aquifer horizons from these sections were identified. The transmissivity of the unconfined aquifer was computed by determining the Dar-Zarrouk parameters (longitudinal unit conductance and transverse unit resistance) and were compared with the actual field transmissivity. The results showed a direct relation between aquifer transmissivity and modified transverse resistance.     

An aquifer vulnerability assessment of the Benin Formation aquifer,Calabar, southeastern Nigeria,using DRASTIC and GIS approach

An aquifer vulnerability of the Benin Formation aquifer (Calabar, southern Nigeria) has been assessed using a combination of DRASTIC index and GIS technology. The assessment was necessitated by the fact that uncontrolled disposal of domestic, industrial and agricultural wastes have caused groundwater contamination. Therefore, prevention of contamination, monitoring and management of the aquifer was urgently required to increase the efficient use of the current water supplies. The DRASTIC method uses seven parameters (depth to groundwater table, net recharge, aquifer media, soil media, topography, influence of vadose zone and hydraulic conductivity), which were used to produce vulnerability maps. The drastic vulnerability index ranged between 124 and 170. The vulnerability map shows that the aquifer is highly vulnerable in southeastern parts of the area covering about 22 %. The medium vulnerability area covers about 56.8 % of Calabar extending from the southwest to northern parts. 21.2 % of the area covering the central and northern parts the area lies within the low vulnerability zone. The present industrial and activities are located in the eastern and western parts, which falls within the low-medium vulnerability areas. Documented nitrate concentration in hand-dug wells and boreholes are in agreement with vulnerability zones. Sensitivity analysis was performed to evaluate the sensitivity of each parameter between map layers such that subjectivity can be reduced to an extent and new weights computed for each DRASTIC parameter. As management options sensitive areas, especially in the southern parts of Calabar area, should be protected from future development.     

综合物化探方法在铁及多金属矿勘查中的应用——以包恩亨地区为例

研究区位于内蒙古包恩亨一带,地表覆盖较厚,找矿标志不明显,综合物化探方法对发现和圈定铁及多金属异常起到了重要作用,取得了显著成果。总结异常区的地质、地球物理和地球化学特征,对处于同一成矿远景区的其他地段寻找该类型矿床,具有十分重要的意义,为寻找隐伏矿床提供了依据。     

Hydrogeological modeling constraints provided by geophysical and geochemical mapping of a chlorinated ethenes plume in northern France

A methodological approach is described which combines geophysical and geochemical data to delineate the extent of a chlorinated ethenes plume in northern France; the methodology was used to calibrate a hydrogeological model of the contaminants’ migration and degradation. The existence of strong reducing conditions in some parts of the aquifer is first determined by measuring in situ the redox potential and dissolved oxygen, dissolved ferrous iron and chloride concentrations. Electrical resistivity imaging and electromagnetic mapping, using the Slingram method, are then used to determine the shape of the pollutant plume. A decreasing empirical exponential relation between measured chloride concentrations in the water and aquifer electrical resistivity is observed; the resistivity formation factor calculated at a few points also shows a major contribution of chloride concentration in the resistivity of the saturated porous medium. MODFLOW software and MT3D99 first-order parent–daughter chain reaction and the RT3D aerobic–anaerobic model for tetrachloroethene (PCE)/trichloroethene (TCE) dechlorination are finally used for a first attempt at modeling the degradation of the chlorinated ethenes. After calibration, the distribution of the chlorinated ethenes and their degradation products simulated with the model approximately reflects the mean measured values in the observation wells, confirming the data-derived image of the plume.     

Hydrogeological and hydrochemical investigation of groundwater using environmental isotopes (18O, 2H, 3H, 14C) and chemical tracers: a case study of the intermediate aquifer,Sfax, southeastern Tunisia

Major element concentrations and stable (δ¹⁸O and δ²H) and radiogenic (³H and ¹⁴C) isotopes in groundwater have proved useful tracers for understanding the geochemical processes that control groundwater mineralization and for identifying recharge sources in the semi-arid region of Sfax (southeastern Tunisia). Major-ion chemical data indicate that the origins of the salinity in the groundwater are the water–rock interactions, mainly the dissolution of evaporitic minerals, as well as the cation exchange with clay minerals. The δ¹⁸O and δ²H relationships suggest variations in groundwater recharge mechanisms. Strong evaporation during recharge with limited rapid water infiltration is evident in the groundwater of the intermediate aquifer. The mixing with old groundwater in some areas explains the low stable isotope values of some groundwater samples. Groundwaters from the intermediate aquifer are classified into two main water types: Ca-Na-SO₄ and Ca-Na-Cl-SO₄. The high nitrate concentrations suggest an anthropogenic source of nitrogen contamination caused by intensive agricultural activities in the area. The stable isotopic signatures reveal three water groups: non-evaporated waters that indicate recharge by recent infiltrated water; evaporated waters that are characterized by relatively enriched δ¹⁸O and δ²H contents; and mixed groundwater (old/recent) or ancient groundwater, characterized by their depleted isotopic composition. Tritium data support the existence of recent limited recharge; however, other low tritium values are indicative of pre-nuclear recharge and/or mixing between pre-nuclear and contemporaneous recharge. The carbon-14 activities indicate that the groundwaters were mostly recharged under different climatic conditions during the cooler periods of the late Pleistocene and Holocene.

     

Estimation of aquifer hydraulic parameters from surface geophysical measurements: a case study of the Upper Cretaceous aquifer, central Sinai, Egypt

The integration of geophysical data with direct hydrogeological measurements can provide a minimally invasive approach to characterize the subsurface at a variety of resolutions and over many spatial scales. The field of hydrogeophysics has attracted much attention during the last two decades. In this domain, the geophysical data inverted to geophysical models are interpreted in terms of the hydrogeology to serve as a basis for the definition of hydraulic models in the areas of interest. The hydraulic conductivity (K) value measured in a reference borehole has been combined with the electrical conductivity obtained from nearby geo-electromagnetic sounding data in the Cenomanian (Upper Cretaceous) aquifer, central Sinai, Egypt. The resulting relation was interpreted with Dar Zarrouk parameters to infer the transmissivity variations at other vertical electrical sounding locations, where K values are unknown. Coincident transient electromagnetic data have been adopted to increase accuracy while interpreting the aquifer geoelectrical properties. The results indicate that the transmissivity values in the aquifer of interest vary from 2,446 to 9,694 m²/day, and K varies from 12.9 to 57.0 m/day throughout the studied area.     

Mobility of arsenic in a Bangladesh aquifer: Inferences from geochemical profiles, leaching data, and mineralogical characterization

Aquifer geochemistry was characterized at a field site in the Munshiganj district of Bangladesh where the groundwater is severely contaminated by As. Vertical profiles of aqueous and solid phase parameters were measured in a sandy deep aquifer (depth >150 m) below a thick confining clay (119 to 150 m), a sandy upper aquifer (3.5 to 119 m) above this confining layer, and a surficial clay layer (<3.5 m). In the deep aquifer and near the top of the upper aquifer, aqueous As levels are low (<10 μg/L), but aqueous As approaches a maximum of 640 μg/L at a depth of 30 to 40 m and falls to 58 μg/L near the base (107 m) of the upper aquifer. In contrast, solid phase As concentrations are uniformly low, rarely exceeding 2 μg/g in the two sandy aquifers and never exceeding 10 μg/g in the clay layers. Solid phase As is also similarly distributed among a variety of reservoirs in the deep and upper aquifer, including adsorbed As, As coprecipitated in solids leachable by mild acids and reductants, and As incorporated in silicates and other more recalcitrant phases. One notable difference among depths is that sorbed As loads, considered with respect to solid phase Fe extractable with 1 N HCl, 0.2 M oxalic acid, and a 0.5 M Ti(III)-citrate-EDTA solution, appear to be at capacity at depths where aqueous As is highest; this suggests that sorption limitations may, in part, explain the aqueous As depth profile at this site. Competition for sorption sites by silicate, phosphate, and carbonate oxyanions appear to sustain elevated aqueous As levels in the upper aquifer. Furthermore, geochemical profiles are consistent with the hypothesis that past or ongoing reductive dissolution of Fe(III) oxyhydroxides acts synergistically with competitive sorption to maintain elevated dissolved As levels in the upper aquifer. Microprobe data indicate substantial spatial comapping between As and Fe in both the upper and deep aquifer sediments, and microscopic observations reveal ubiquitous Fe coatings on most solid phases, including quartz, feldspars, and aluminosilicates. Extraction results and XRD analysis of density/magnetic separates suggest that these coatings may comprise predominantly Fe(II) and mixed valence Fe solids, although the presence of Fe(III) oxyhydroxides can not be ruled out. These data suggest As release may continue to be linked to dissolution processes targeting Fe, or Fe-rich, phases in these aquifers.     

Assessment of hot groundwater in an arid area in Tunisia using geochemical and fuzzy logic approaches

In this study, thermal groundwater from arid area in southeastern Tunisia was assessed for irrigation use. For this purpose, thirty-one water samples were collected and physiochemical parameters (EC, pH, TDS, major ions) were measured and analyzed. A fuzzy logic model was developed in which six parameters were integrated: electrical conductivity, sodium adsorption ratio, sodium percentage, Kelly ratio, permeability index and temperature. The membership functions for a fuzzy logic model were developed using linguistic terms and trapezoidal shapes. The fuzzy logic model developed was validated with a dataset of chemical analyses from groundwater sampled in the study area. The assessment indicated that 26% of the samples were in the “good” class, 10% in the “good to permissible” class, 55% are in the “permissible” class, 6% are in the “permissible to harmful” class and 3% were considered to be harmful and therefore unsuitable for use in irrigation. The effectiveness, simplicity and robustness of the fuzzy model assessment make this approach a more consistent and reliable way of assessing water quality than conventional methods of assessing water quality data.     

Hydrogeochemical characteristics prediction using multiple linear regression: case study on unconfined aquifer in northeastern Tunisia

The main factors and mechanisms controlling the groundwater chemistry and mineralization are recognized through hydrochemical data. However, water quality prediction remains a key parameter for groundwater resources management and planning. The geochemical study of groundwater of a multilayered aquifer system in Tunisia is recognized by measurements of the pH, EC, total dissolved solids (TDS), major ion concentration and nitrates of 36 samples from pumping wells covering the aquifer extension and analyzed using standard laboratory and field methods. The calcite precipitation, gypsum, anhydrite and halite dissolution, and direct and reverse ion exchange are the principal process of chemical evolution in the Nadhour-Saouaf aquifer system. Using stepwise regression, the concentration groups of (Ca, Cl, and NO₃), (Cl, SO₄, and Mg), and (Ca and Na) exhibit significant prediction of TDS in Plio-Quaternary, Miocene, and Oligocene aquifer levels, respectively. The highest values of R ² and adjusted R ² close to 1 revealed the accuracy of the developed models which is confirmed by the weak difference between the measured and estimated values varying between ?12 and 8%. The important uncertainty parameters that affected the estimated TDS are assessed by the sensitivity analysis method. The concentration of (Cl), (Ca and Cl), and (Na) are the major parameters affecting the TDS sensitivity of the Plio-Quaternary, Miocene, and Oligocene aquifer levels, respectively. Hence, the developed TDS models provide a more simple and easy alternative to other methods used for groundwater quality estimation and prediction as proven from external validation on groundwater samples unconsidered in the model construction.     

Hydrochemistry of surface water and groundwater from a fractured carbonate aquifer in the Helwan area,Egypt

Groundwater is an important water resource in the Helwan area, not only for drinking and agricultural purposes, but also because several famous mineral springs have their origin in the fractured carbonate aquifer of the region. The area is heavily populated with a high density of industrial activities which may pose a risk for groundwater and surface water resources. The groundwater and surface water quality was investigated as a basis for more future investigations. The results revealed highly variable water hydrochemistry. High values of chloride, sulphate, hardness and significant mineralization were detected under the industrial and high-density urban areas. High nitrate contents in the groundwater recorded in the southern part of the study area are probably due to irrigation and sewage infiltrations from the sewage treatment station. The presence of shale and marl intercalation within the fissured and cavernous limestone aquifer promotes the exchange reactions and dissolution processes. The groundwater type is sodium, sulphate, chloride reflecting more mineralized than surface water. The results also showed that water in the study area (except the Nile water) is unsuitable for drinking purposes, but it can be used for irrigation and industrial purposes with some restrictions.     

A comparison of the geochemical response to different managed aquifer recharge operations for injection of urban stormwater in a carbonate aquifer

Managed aquifer recharge (MAR) is increasingly being considered as a means of reusing urban stormwater and wastewater to supplement the available water resources. Subsurface storage is advantageous as it does not impact on the area available for urban development, while the aquifer also provides natural treatment. However, subsurface storage can also have deleterious effects on the recovered water quality through water–rock interactions which can also impact on the integrity of the aquifer matrix. A recent investigation into the potential for stormwater recycling via Aquifer Storage Transfer and Recovery (ASTR) in a carbonate aquifer is used to determine the important hydrogeochemical processes that impact on the recovered water quality. An extensive period of aquifer flushing allows observation of water quality changes under two operating scenarios: (1) separate wells for injection and recovery, representing ASTR; and (2) a single well for injection and recovery, representing Aquifer Storage and Recovery (ASR).     

Assessing groundwater vulnerability to nitrate pollution using statistical approaches: a case study of Sidi Bouzid shallow aquifer,Central Tunisia

The study region comprises the Sidi Bouzid shallow aquifer, which is located in the western part of Central Tunisia. It is mainly occupied by agricultural land with intensive use of chemical fertilizers especially nitrates. For this reason, nitrate measurement was performed in 38 water samples to evaluate and calibrate the obtained models. Several environmental parameters were analyzed using groundwater nitrate concentrations, and different statistical approaches were applied to assess and validate the groundwater vulnerability to nitrate pollution in the Sidi Bouzid shallow aquifer. Multiple linear regression (MLR), analyses of covariance (ANCOVA), and logistic regression (LR) were carried out for studying the nitrate effects on groundwater pollution. Statistical analyses were used to identify major environmental factors that control the groundwater nitrate concentration in this region. Correlation and statistical analyses were conducted to examine the relationship between the nitrate (dependent variable) and various environmental variables (independent variables). All methods show that “groundwater depth” and “land use” parameters are statistically significant at 95% level of confidence. Groundwater vulnerability map was obtained by overlaying these two thematic layers which were obtained in the GIS environment. It shows that the high vulnerability area coincides with the likelihood that nitrate concentration exceeds 24.5 mg/l in groundwater. The relationship between the groundwater vulnerability classes and the nitrate concentrations provides satisfactory results; it showed an Eta-squared correlation coefficient of 64%. So, the groundwater vulnerability map can be used as a synthetic document for realistic management of groundwater quality.     

Application of the principal component analysis on geochemical data: a case study in the basement complex of Southern Ilesa area, Nigeria

The study area occupies a part in southern Ilesa and is located within the schist belt of southwestern Nigeria, which embraces undifferentiated schist, gneisses, and migmatites with pegmatites, schist and epidorite complex, quartzite and quartz schist, granite gneiss, amphibolite, pegmatised schist, granulite, and gneiss. The study is aimed at clarifying the potential source of mineralization dealt with before in regional studies. Sixty-one soil samples were collected and analyzed for identifying these elements: Pb, Fe, Ni, Cd, Cr, Cu, Zn, and Mn. Multivariate analysis was done to obtain the coefficients of principal components from the standardized variables The elemental associations from the principal components analysis that accounted for 85.34% variability of the total variance are: Fe–Mn, Pb–Cr, and Cd–Zn. Comparably, these are equivalent with the previous results in the amphibolites and added the extension of association region to involve the schist and epidorite complex, quartzite, and quartz schist. The metallic association ratio revealed high metallic concentrations and led to the mineralization trend in southern Ilesa.