共查询到20条相似文献,搜索用时 15 毫秒
1.
Hannah T.M. Heinrich Phil J. Bremer Christopher J. Daughney 《Geochimica et cosmochimica acta》2008,72(17):4185-4200
Acid-base titrations and electrophoretic mobility measurements were conducted on the thermophilic bacteria Anoxybacillus flavithermus and Geobacillus stearothermophilus at two different growth times corresponding to exponential and stationary/death phase. The data showed significant differences between the two investigated growth times for both bacterial species. In stationary/death phase samples, cells were disrupted and their buffering capacity was lower than that of exponential phase cells. For G. stearothermophilus the electrophoretic mobility profiles changed dramatically. Chemical equilibrium models were developed to simultaneously describe the data from the titrations and the electrophoretic mobility measurements. A simple approach was developed to determine confidence intervals for the overall variance between the model and the experimental data, in order to identify statistically significant changes in model fit and thereby select the simplest model that was able to adequately describe each data set. Exponential phase cells of the investigated thermophiles had a higher total site concentration than the average found for mesophilic bacteria (based on a previously published generalised model for the acid-base behaviour of mesophiles), whereas the opposite was true for cells in stationary/death phase. The results of this study indicate that growth phase is an important parameter that can affect ion binding by bacteria, that growth phase should be considered when developing or employing chemical models for bacteria-bearing systems. 相似文献
2.
Several recent studies have applied surface complexation theory to model metal adsorption behaviour onto mesophilic bacteria. However, no investigations have used this approach to characterise metal adsorption by thermophilic bacteria. In this study, we perform batch adsorption experiments to quantify cadmium adsorption onto the thermophile Anoxybacillus flavithermus. Surface complexation models (incorporating the Donnan electrostatic model) are developed to determine stability constants corresponding to specific adsorption reactions. Adsorption reactions and stoichiometries are constrained using spectroscopic techniques (XANES, EXAFS, and ATR-FTIR). The results indicate that the Cd adsorption behaviour of A. flavithermus is similar to that of other mesophilic bacteria. At high bacteria-to-Cd ratios, Cd adsorption occurs by formation of a 1:1 complex with deprotonated cell wall carboxyl functional groups. At lower bacteria-to-Cd ratios, a second adsorption mechanism occurs at pH > 7, which may correspond to the formation of a Cd-phosphoryl, CdOH-carboxyl, or CdOH-phosphoryl surface complex. X-ray absorption spectroscopic investigations confirm the formation of the 1:1 Cd-carboxyl surface complex, but due to the bacteria-to-Cd ratio used in these experiments, other complexation mechanism(s) could not be unequivocally resolved by the spectroscopic data. 相似文献
3.
Bhoopesh Mishra Maxim Boyanov Shelly D. Kelly Jeremy B. Fein 《Geochimica et cosmochimica acta》2010,74(15):4219-9603
Bulk Cd adsorption isotherm experiments, thermodynamic equilibrium modeling, and Cd K edge EXAFS were used to constrain the mechanisms of proton and Cd adsorption to bacterial cells of the commonly occurring Gram-positive and Gram-negative bacteria, Bacillus subtilis and Shewanella oneidensis, respectively. Potentiometric titrations were used to characterize the functional group reactivity of the S. oneidensis cells, and we model the titration data using the same type of non-electrostatic surface complexation approach as was applied to titrations of B. subtilis suspensions by Fein et al. (2005). Similar to the results for B. subtilis, the S. oneidensis cells exhibit buffering behavior from approximately pH 3-9 that requires the presence of four distinct sites, with pKa values of 3.3 ± 0.2, 4.8 ± 0.2, 6.7 ± 0.4, and 9.4 ± 0.5, and site concentrations of 8.9(±2.6) × 10−5, 1.3(±0.2) × 10−4, 5.9(±3.3) × 10−5, and 1.1(±0.6) × 10−4 moles/g bacteria (wet mass), respectively. The bulk Cd isotherm adsorption data for both species, conducted at pH 5.9 as a function of Cd concentration at a fixed biomass concentration, were best modeled by reactions with a Cd:site stoichiometry of 1:1. EXAFS data were collected for both bacterial species as a function of Cd concentration at pH 5.9 and 10 g/L bacteria. The EXAFS results show that the same types of binding sites are responsible for Cd sorption to both bacterial species at all Cd loadings tested (1-200 ppm). Carboxyl sites are responsible for the binding at intermediate Cd loadings. Phosphoryl ligands are more important than carboxyl ligands for Cd binding at high Cd loadings. For the lowest Cd loadings studied here, a sulfhydryl site was found to dominate the bound Cd budgets for both species, in addition to the carboxyl and phosphoryl sites that dominate the higher loadings. The EXAFS results suggest that both Gram-positive and Gram-negative bacterial cell walls have a low concentration of very high-affinity sulfhydryl sites which become masked by the more abundant carboxyl and phosphoryl sites at higher metal:bacteria ratios. This study demonstrates that metal loading plays a vital role in determining the important metal-binding reactions that occur on bacterial cell walls, and that high affinity, low-density sites can be revealed by spectroscopy of biomass samples. Such sites may control the fate and transport of metals in realistic geologic settings, where metal concentrations are low. 相似文献
4.
Drew Gorman-Lewis 《Geochimica et cosmochimica acta》2011,75(5):1297-1307
Understanding bacterial surface reactivity requires many different lines of investigation. Toward this end, we used isothermal titration calorimetry to measure heats of proton adsorption onto a Gram positive thermophile Bacillus licheniformis at 25, 37, 50, and 75 °C. Proton adsorption under all conditions exhibited exothermic heat production. Below pH 4.5, exothermic heats decreased as temperature increased above 37 °C; above pH 4.5, there was no significant difference in heats evolved at the temperatures investigated. Total proton uptake did not vary significantly with temperature. Site-specific enthalpies and entropies were calculated by applying a 4-site, non-electrostatic surface complexation model to the calorimetric data. Interpretation of site-specific enthalpies and entropies of proton adsorption for site L1, L2, and L4 are consistent with previous interpretations of phosphoryl, carboxyl, and hydroxyl/amine site-identities, respectively, and with previous calorimetric measurements of proton adsorption onto mesophilic species. Enthalpies and entropies for surface site L3 are not consistent with the commonly inferred phosphoryl site-identity and are more consistent with sulfhydryl functional groups. These results reveal intricacies of surface reactivity that are not detectable by other methods. 相似文献
5.
Jacqueline Claessens Yvonne van Lith Philippe Van Cappellen 《Geochimica et cosmochimica acta》2006,70(2):267-276
To distinguish the buffering capacity associated with functional groups in the cell wall from that resulting from metabolic processes, base or acid consumption by live and dead cells of the Gram-negative bacterium Shewanella putrefaciens was measured in a pH stat system. Live cells exhibited fast consumption of acid (pH 4) or base (pH 7, 8, 9, and 10) during the first few minutes of the experiments. At pH 5.5, no acid or base was required to maintain the initial pH constant. The initial amounts of acid or base consumed by the live cells at pH 4, 8, and 10 were of comparable magnitudes as those neutralized at the same pHs by intact cells killed by exposure to gamma radiation or ethanol. Cells disrupted in a French press required higher amounts of acid or base, due to additional buffering by intracellular constituents. At pH 4, acid neutralization by suspensions of live cells stopped after 50 min, because of loss of viability. In contrast, under neutral and alkaline conditions, base consumption continued for the entire duration of the experiments (5 h). This long-term base neutralization was, at least partly, due to active respiration by the cells, as indicated by the build-up of succinate in solution. Qualitatively, the acid-base activity of live cells of the Gram-positive bacterium Bacillus subtilis resembled that of S. putrefaciens. The pH-dependent charging of ionizable functional groups in the cell walls of the live bacteria was estimated from the initial amounts of acid or base consumed in the pH stat experiments. From pH 4 to 10, the cell wall charge increased from near-zero values to about −4 × 10−16 mol cell−1 and −6.5 × 10−16 mol cell−1 for S. putrefaciens and B. subtilis, respectively. The similar cell wall charging of the two bacterial strains is consistent with the inferred low contribution of lipopolysaccharides to the buffering capacity of the Gram-negative cell wall (of the order of 10%). 相似文献
6.
Jeremy B. Fein Jean-François Boily Drew Gorman-Lewis 《Geochimica et cosmochimica acta》2005,69(5):1123-1132
To provide constraints on the speciation of bacterial surface functional groups, we have conducted potentiometric titrations using the gram-positive aerobic species Bacillus subtilis, covering the pH range 2.1 to 9.8. Titration experiments were conducted using an auto-titrator assembly, with the bacteria suspended in fixed ionic strength (0.01 to 0.3 M) NaClO4 solutions. We observed significant adsorption of protons over the entire pH range of this study, including to the lowest pH values examined, indicating that proton saturation of the cell wall did not occur under any of the conditions of the experiments. Ionic strength, over the range studied here, did not have a significant effect on the observed buffering behavior relative to experimental uncertainty. Electrophoretic mobility measurements indicate that the cell wall is negatively charged, even under the lowest pH conditions studied. These experimental results necessitate a definition of the zero proton condition such that the total proton concentration at the pH of suspension is offset to account for the negative bacterial surface charge that tends towards neutrality at pH <2.The buffering intensity of the bacterial suspensions reveals a wide spread of apparent pKa values. This spread was modeled using three significantly different approaches: a Non-Electrostatic Model, a Constant Capacitance Model, and a Langmuir-Freundlich Model. The approaches differ in the manner in which they treat the surface electric field effects, and in whether they treat the proton-active sites as discrete functional groups or as continuous distributions of related sites. Each type of model tested, however, provides an excellent fit to the experimental data, indicating that titration data alone are insufficient for characterizing the molecular-scale reactions that occur on the bacterial surface. Spectroscopic data on the molecular-scale properties of the bacterial surface are required to differentiate between the underlying mechanisms of proton adsorption inherent in these models. The applicability and underlying conceptual foundation of each model is discussed in the context of our current knowledge of the structure of bacterial cell walls. 相似文献
7.
Anthony Matynia Thomas Lenoir Benjamin Causse Lorenzo Spadini Alain Manceau 《Geochimica et cosmochimica acta》2010,74(6):1836-18046
Average proton binding constants (KH,i) for structure models of humic (HA) and fulvic (FA) acids were estimated semi-empirically by breaking down the macromolecules into reactive structural units (RSUs), and calculating KH,i values of the RSUs using linear free energy relationships (LFER) of Hammett. Predicted log KH,COOH and log KH,Ph-OH are 3.73 ± 0.13 and 9.83 ± 0.23 for HA, and 3.80 ± 0.20 and 9.87 ± 0.31 for FA. The predicted constants for phenolic-type sites (Ph-OH) are generally higher than those derived from potentiometric titrations, but the difference may not be significant in view of the considerable uncertainty of the acidity constants determined from acid-base measurements at high pH. The predicted constants for carboxylic-type sites agree well with titration data analyzed with Model VI (4.10 ± 0.16 for HA, 3.20 ± 0.13 for FA; Tipping, 1998), the Impermeable Sphere model (3.50-4.50 for HA; Avena et al., 1999), and the Stockholm Humic Model (4.10 ± 0.20 for HA, 3.50 ± 0.40 for FA; Gustafsson, 2001), but differ by about one log unit from those obtained by Milne et al. (2001) with the NICA-Donnan model (3.09 ± 0.51 for HA, 2.65 ± 0.43 for FA), and used to derive recommended generic values. To clarify this ambiguity, 10 high-quality titration data from Milne et al. (2001) were re-analyzed with the new predicted equilibrium constants. The data are described equally well with the previous and new sets of values (R2 ? 0.98), not necessarily because the NICA-Donnan model is overparametrized, but because titration lacks the sensitivity needed to quantify the full binding properties of humic substances. Correlations between NICA-Donnan parameters are discussed, but general progress is impeded by the unknown number of independent parameters that can be varied during regression of a model fit to titration data. The high consistency between predicted and experimental KH,COOH values, excluding those of Milne et al. (2001), gives faith in the proposed semi-empirical structural approach, and its usefulness to assess the plausibility of proton stability constants derived from simulations of titration data. 相似文献
8.
O.S. Pokrovsky R.E. Martinez S.V. Golubev E.I. Kompantseva L.S. Shirokova 《Applied Geochemistry》2008
The purpose of the present work is to extend our knowledge of metal–cyanobacteria interactions and to contribute to the database on adsorption parameters of aquatic microorganisms with respect to metal pollutants. To this end, the surface properties of the cyanobacteria (Gloeocapsa sp. f-6gl) were studied using potentiometric acid–base titration methods and ATR-FTIR (attenuated total reflection infrared) spectroscopy. The electrophoretic mobility of viable cells was measured as a function of pH and ionic strength (0.01 and 0.1 M). Surface titrations at 0.01–1.0 M NaCl were performed using limited residence time reactors (discontinuous titration) with analysis of Ca, Mg and dissolved organic C for each titration point in order to account for alkali-earth metal–proton exchange and cell degradation, respectively. Results demonstrate that the cell-wall bound Ca and Mg from the culture media contribute to the total proton uptake via surface ion-exchange reactions. This has been explicitly taken into account for net proton balance calculations. Adsorption of Zn, Cd, Pb and Cu was studied at 25 °C in 0.01 M NaNO3 as a function of pH and metal concentration. The proportion of adsorbed metal increases as a function of culture age with cells of 44 days old having the largest adsorption capacities. A competitive Langmuir sorption isotherm in conjunction with a linear programming method (LPM) was used to fit experimental data and assess the number of surface sites and adsorption reaction constants involved in the binding of metals to the cyanobacteria surface. These observations allowed the determination of the identity and concentration of the major surface functional groups (carboxylate, amine, phosphoryl/phosphodiester and hydroxyl) responsible for the amphoteric behavior of cyanobacterial cell surfaces in aqueous solutions and for metal adsorption. Results of this work should allow better optimizing of metal bioremediation/biosequestration processes as they help to define the most efficient range of pH, cell biomass and duration of exposure necessary for controlled metal adsorption on cyanobacteria cultures. It follows from comparison of adsorption model parameters between different bacteria that technological application of cyanobacteria in wastewater bioremediation can be as efficient as other biological sorbents. 相似文献
9.
Surface chemistry of disordered mackinawite (FeS) 总被引:1,自引:0,他引:1
Mariëtte Wolthers Laurent Charlet David Rickard 《Geochimica et cosmochimica acta》2005,69(14):3469-3481
Disordered mackinawite, FeS, is the first formed iron sulfide in ambient sulfidic environments and has a highly reactive surface. In this study, the solubility and surface chemistry of FeS is described. Its solubility in the neutral pH range can be described by Ksapp = {Fe2+} · {H2S(aq)} · {H+}−2 = 10+4.87±0.27. Acid-base titrations show that the point of zero charge (PZC) of disordered mackinawite lies at pH ∼7.5. The hydrated disordered mackinawite surface can be best described by strongly acidic mono-coordinated and weakly acidic tricoordinated sulfurs. The mono-coordinated sulfur site determines the acid-base properties at pH < PZC and has a concentration of 1.2 × 10−3 mol/g FeS. At higher pH, the tricoordinated sulfur, which has a concentration of 1.2 × 10−3 mol/g FeS, determines surface charge changes. Total site density is 4 sites nm−2. The acid-base titration data are used to develop a surface complexation model for the surface chemistry of FeS. 相似文献
10.
Brian R. Ginn 《Geochimica et cosmochimica acta》2008,72(16):3939-3948
In this study, we measure proton, Pb, and Cd adsorption onto the bacteria Deinococcus radiodurans, Thermus thermophilus, Acidiphlium angustum, Flavobacterium aquatile, and Flavobacterium hibernum, and we calculate the thermodynamic stability constants for the important surface complexes. These bacterial species represent a wide genetic diversity of bacteria, and they occupy a wide range of habitats. All of the species, except for A. angustum, exhibit similar proton and metal uptake. The only species tested that exhibits significantly different protonation behavior is A. angustum, an acidophile that grows at significantly lower pH than the other species of this study. We demonstrate that a single, metal-specific, surface complexation model can be used to reasonably account for the acid/base and metal adsorption behaviors of each species. We use a four discrete site non-electrostatic model to describe the protonation of the bacterial functional groups, with averaged pKa values of 3.1 ± 0.3, 4.8 ± 0.2, 6.7 ± 0.1, and 9.2 ± 0.3, and site concentrations of (1.0 ± 0.17) × 10−4, (9.0 ± 3.0) × 10−5, (4.6 ± 1.8) × 10−5, and (6.1 ± 2.3) × 10−5 mol of sites per gram wet mass of bacteria, respectively. Adsorption of Cd and Pb onto the bacteria can be accounted for by the formation of complexes with each of the bacterial surface sites. The average log stability constants for Cd complexes with Sites 1-4 are 2.4 ± 0.4, 3.2 ± 0.1, 4.4 ± 0.1, and 5.3 ± 0.1, respectively. The average log stability constants for Pb complexes with Sites 1-4 are 3.3 ± 0.2, 4.5 ± 0.3, 6.5 ± 0.1, and 7.9 ± 0.5, respectively. This study demonstrates that a wide range of bacteria exhibit similar proton and metal adsorption behaviors, and that a single set of averaged acidity constants, site concentrations, and stability constants for metal-bacterial surface complexes yields a reasonable model for the adsorption behavior of many of these species. The differences in adsorption behavior that we observed for A. angustum demonstrate that genetic differences do exist between the cell wall functional group chemistries of some bacterial species, and that significant exceptions to the typical bacterial adsorption behavior do exist. 相似文献
11.
The soluble and insoluble hydrolysis products of palladium were investigated in aqueous solutions of 0.6 mol kg−1 NaCl at 298.2 K. Potentiometric titrations of millimolal palladium(II) solutions were used to monitor hydrolysis reactions of the mononuclear PdCl3OH2− and species. Spectrophotometric titrations were also used to corroborate the speciation change and to extract the correlative molar absorption coefficients for the PdCl3OH2− species in the 210-320 nm range. Longer-term potentiometric titrations systematically yielded precipitates which matured over a period of 6 weeks and resulted in a more extensive release of protons to the solution. Precipitation experiments in the 3-11 pH range showed the dominant precipitating phase to be Pd(OH)1.72Cl0.28. EXAFS measurements yielded an average of 3.50 O and 0.50 Cl atoms per Pd atom with a Pd-O distance of 2.012 Å and a Pd-Cl distance of 2.185 Å. Speciation modeling of proton and palladium mass balance data of experiments for palladium concentrations ranging from 0.047 to 10.0 mmol kg−1 required the presence of polynuclear complexes containing 3-9 palladium atoms. The existence of such complexes is moreover supported by previous investigations of palladium hydroxide chains of the type [Pd(OH)1.72Cl0.28]n, that are coiled and/or aggregated into nanometer-sized (15-40 Å) spheroids. 相似文献
12.
Using groundwater quality data from the Lusatian post-mining district a hydrogeochemical model is derived for the evolution of mining affected groundwaters in pyrite-rich dumps which consist mainly of silicates and variable amounts of calcite. Pyrite oxidation paralleled by buffer processes leads to gypsum saturation in a significant portion of the water. Gypsum precipitation controls SO4 and Ca concentrations in groundwaters above an ionic strength (I) of 60 mM. It has been found that there is always a clear relationship between I, SO4 and Ca concentrations. In particular, there is a tendency that Ca concentrations decrease with increase in ionic strength above I = 60 mM and a striking rareness of samples with SO4 concentrations between 20 and 30 mM above an ionic strength of 100 mM. These observations are explained by a genetic model. This model also explains the observed relationship between the c(Fe)/c(SO4)-ratio, the ionic strength, and the observed pH-values. Based on the field data and supported by geochemical equilibrium calculations, it is shown that silicate weathering along with calcite dissolution must be a significant buffering process at least in some areas. 相似文献
13.
A. Gélabert O.S. Pokrovsky J. Schott A. Feurtet-Mazel 《Geochimica et cosmochimica acta》2007,71(15):3698-3716
This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom-water interfaces for two marine planktonic (Thalassiosira weissflogii, TW; Skeletonema costatum, SC) and two freshwater periphytic species (Achnanthidium minutissimum, AMIN; Navicula minima, NMIN) by combining adsorption measurements with surface complexation modeling. Adsorption kinetics was studied as a function of pH and initial metal concentration in sodium nitrate solution and in culture media. Kinetic data were consistent with a two-step mechanism in which the loss of a water molecule from the inner coordination sphere of the metal is rate limiting. Reversible adsorption experiments, with 3 h of exposure to metal, were performed as a function of pH (2-9), metal concentration in solution (10−9-10−3 M), and ionic strength (10−3-1.0 M). While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. Measurements of electrophoretic mobilities (μ) revealed negative surface potential for AMIN diatom, however, the absolute value of μ decreases with increase of [Pb2+]aq suggesting the metal adsorption on negative surface sites. These observations allowed us to construct a surface complexation model (SCM) for cadmium and lead binding by diatom surfaces that postulates the Constant Capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. In the full range of investigated Cd concentration, the SCM is able to describe the concentration of adsorbed metal as a function of [Cd2+]aq without implying the presence of high affinity, low abundance sites, that are typically used to model the metal interactions with natural multi-component organic substances. At the same time, Cd fast initial reaction requires the presence of “highly reactive sites” those concentration represents only 2.5-3% of the total amount of carboxylic sites. For reversible adsorption experiments, the dominating carboxylic groups, whose concentration is allowed to vary within the uncertainty of experimental acid-base titrations, are sufficient to reproduce the metal adsorption isotherms. Results of this study strongly suggest that laboratory experiments performed in a wide range of metal to biomass ratios, represent robust and relatively simple method for assessing the distribution of metals between aqueous solution and planktonic and periphytic biomass in natural settings. 相似文献
14.
Interaction between zinc and freshwater and marine diatom species: Surface complexation and Zn isotope fractionation 总被引:1,自引:0,他引:1
This work is devoted to characterization of zinc interaction in aqueous solution with two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption and electrophoretic measurements with surface complexation modeling and by assessing Zn isotopes fractionation during both long term uptake and short term adsorption on diatom cells and their frustules. Reversible adsorption experiments were performed at 25 and 5 °C as a function of exposure time (5 min to 140 h), pH (2 to 10), zinc concentration in solution (10 nM to 1 mM), ionic strength (I = 0.001 to 1.0 M) and the presence of light. While the shape of pH-dependent adsorption edge is almost the same for all four species, the constant-pH adsorption isotherm and maximal Zn binding capacities differ by an order of magnitude. The extent of adsorption increases with temperature from 5 to 25 °C and does not depend on light intensity. Zinc adsorption decreases with increase of ionic strength suggesting competition with sodium for surface sites. Cell number-normalized concentrations of sorbed zinc on whole cells and their silica frustules demonstrated only weak contribution of the latter (10-20%) to overall zinc binding by diatom cell wall. Measurements of electrophoretic mobilities (μ) revealed negative diatoms surface potential in the full range of zinc concentrations investigated (0.15-760 μmol/L), however, the absolute value of μ decreases at [Zn] > 15 μmol/L suggesting a change in surface speciation. These observations allowed us to construct a surface complexation model for Zn binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Zn complexation with carboxylate and silanol groups. Thermodynamic and structural parameters of this model are based on previous acid-base titration and spectroscopic results and allow quantitative reproduction of all adsorption experiments. Although Zn adsorption constants on carboxylate groups are almost the same, Zn surface adsorption capacities are very different among diatom species which is related to the systematic differences in their cell wall composition and thickness. Measurements of Zn isotopic composition (66Zn/(64Zn)) performed using a multicollector ICP MS demonstrated that irreversible incorporation of Zn in cultured diatom cells produces enrichment in heavy isotope compared to growth media (Δ66Zn(solid-solution) = 0.27 ± 0.05, 0.08 ± 0.05, 0.21 ± 0.05, and 0.19 ± 0.05‰ for TW, SC, NMIN, and AMIN species, respectively). Accordingly, an enrichment of cells in heavy isotopes (Δ66Zn(solid-solution) = 0.43 ± 0.1 and 0.27 ± 0.1‰ for NMIN and AMIN, respectively) is observed following short-term Zn sorption on freshwater cells in nutrient media at pH ∼ 7.8. Finally, diatoms frustules are enriched in heavy isotopes compared to solution during Zn adsorption on silica shells at pH ∼ 5.5 (Δ66Zn(solid-solution) = 0.35 ± 0.10‰). Measured isotopes fractionation can be related to the structure and stability of Zn complexes formed and they provide a firm basis for using Zn isotopes for biogeochemical tracing. 相似文献
15.
The aqueous interfacial chemistry of kaolinite and Na-montmorillonite samples was investigated by potentiometric measurements using acid/base continuous titrations and batch experiments at 25 and 60 °C. Using the batch experimental method, a continuous drift of pH was observed reflecting the mineral dissolution. Consequently, the continuous titration method appears to be the best way of studying solid surface reactions. For each clay mineral, the net proton surface excess/consumption was calculated as a function of pH and ionic strength (0.025, 0.1 and 0.5 M). At 25 °C, and according to the literature data, the pH corresponding to zero net proton consumption for montmorillonite appears to depend on ionic strength, whereas the value for kaolinite is constant and close to 5. Similar results are obtained at 60 °C, which suggests that the point of zero net proton consumption for clay minerals does not depend on temperature, at least up to 60 °C. On the other hand, the temperature rise induces a slight increase of the net proton surface excess. Finally, the diffuse double layer formalism (DDLM) is used to model the experimental data. The model involves two processes: the protonation/deprotonation of two types of edge sites (aluminol and silanol) and H+/Na+ exchange reactions on basal surfaces, while a tiny proportion of the negative structural charge remains uncompensated. This last process maintains a negative surface potential whatever the pH of the solution, which is in agreement with electrokinetic data. 相似文献
16.
Claire Chaïrat Eric H. Oelkers Jacques Schott 《Geochimica et cosmochimica acta》2007,71(24):5888-5900
The surface chemistry of fluorapatite in aqueous solution was investigated using electrokinetic techniques, potentiometric titrations, solubility measurements, and attenuated total reflection infrared spectroscopy. All methods indicate the formation of Ca/F depleted, P enriched altered layer via exchange reactions between H+ and Ca2+, and OH− and F− at the fluorapatite (FAP) surface. Observations suggest that this leached layer has a di-calcium phosphate (CaHPO4) composition and that it controls the apparent solubility of FAP. Electrokinetic measurements yield an iso-electric point value of 1 ± 0.5 consistent with a negatively charged FAP surface at pH > 1. In contrast, surface titrations give an apparent pH of point of zero charge of ∼7.7, consistent with a positively charged surface at pH < 7.7. These differences are shown to stem from proton consumption by both proton exchange and dissolution reactions at the FAP surface. After taking account for these effects, FAP surface charge is shown to be negative to at least pH 4 by surface titration analysis. 相似文献
17.
The dissolution rate of illite, a common clay mineral in Australian soils, was studied in saline-acidic solutions under far from equilibrium conditions. The clay fraction of Na-saturated Silver Hill illite (K1.38Na0.05)(Al2.87Mg0.46Fe3+0.39Fe2+0.28Ti0.07)[Si7.02Al0.98]O20(OH)4 was used for this study. The dissolution rates were measured using flow-through reactors at 25 ± 1 °C, solution pH range of 1.0-4.25 (H2SO4) and at two ionic strengths (0.01 and 0.25 M) maintained using NaCl solution. Illite dissolution rates were calculated from the steady state release rates of Al and Si. The dissolution stoichiometry was determined from Al/Si, K/Si, Mg/Si and Fe/Si ratios. The release rates of cations were highly incongruent during the initial stage of experiments, with a preferential release of Al and K over Si in majority of the experiments. An Al/Si ratio >1 was observed at pH 2 and 3 while a ratio close to the stoichiometric composition was observed at pH 1 and 4 at the higher ionic strength. A relatively higher K+ release rate was observed at I = 0.25 in 2-4 pH range than at I = 0.01, possibly due to ion exchange reaction between Na+ from the solution and K+ from interlayer sites of illite. The steady state release rates of K, Fe and Mg were higher than Si over the entire pH range investigated in the study. From the point of view of the dominant structural cations (Si and Al), stoichiometric dissolution of illite occurred at pH 1-4 in the higher ionic strength experiments and at pH ?3 for the lower ionic strength experiments. The experiment at pH 4.25 and at the lower ionic strength exhibited lower RAl (dissolution rate calculated from steady state Al release) than RSi (dissolution rate calculated from steady state Si release), possibly due to the adsorption of dissolved Al as the output solutions were undersaturated with respect to gibbsite. The dissolution of illite appears to proceed with the removal of interlayer K followed by the dissolution of octahedral cations (Fe, Mg and Al), the dissolution of Si is the limiting step in the illite dissolution process. A dissolution rate law showing the dependence of illite dissolution rate on proton concentration in the acid-sulfate solutions was derived from the steady state dissolution rates and can be used in predicting the impact of illite dissolution in saline acid-sulfate environments. The fractional reaction orders of 0.32 (I = 0.25) and 0.36 (I = 0.01) obtained in the study for illite dissolution are similar to the values reported for smectite. The dissolution rate of illite is mainly controlled by solution pH and no effect of ionic strength was observed on the dissolution rates. 相似文献
18.
In this study, we conducted electrophoretic mobility, potentiometric titration, and metal sorption experiments to investigate the surface charge characteristics of Bacillus subtilis and the electrostatic interactions between metal cations and the cell surface electric field. Electrophoretic mobility experiments performed as a function of pH and ionic strength show an isoelectric point of pH 2.4, with the magnitude of the electrokinetic potential increasing with increasing pH, and decreasing with increasing ionic strength. Potentiometric titration experiments conducted from pH 2.4 to 9 yield an average surface charge excess of 1.6 μmol/mg (dry mass). Corresponding cell wall charge density values were used to calculate the Donnan potential (ΨDON) as function of pH and ionic strength. Metal sorption experiments conducted with Ca(II), Sr(II), and Ba(II) exhibit strong ionic strength dependence, suggesting that the metal ions are bound to the bacterial cell wall via an outer-sphere complexation mechanism. Intrinsic metal sorption constants for the sorption reactions were determined by correcting the apparent sorption constant with the Boltzmann factor. A 1:2 metal-ligand stoichiometry provides the best fit to the experimental data with log K2int values of 5.9 ± 0.3, 6.0 ± 0.2, 6.2 ± 0.2 for Ca(II), Sr(II), and Ba(II) respectively. Electrophoretic mobility measurements of cells sorbed with Ca(II), Sr(II), and Ba(II) support the 1:2 sorption stoichiometry. These results indicate that electrical potential parameters derived from the Donnan model can be applied to predict metal binding onto bacterial surfaces over a wide range of pH and ionic strength conditions. 相似文献
19.
A case study on the behaviour of a deep excavation in sand 总被引:1,自引:0,他引:1
A complete case record of an excavation in sand is explored in this study. Numerical analyses were conducted to evaluate the influences of soil elasticity, creep and soil–wall interface. Back-analyses indicate small strain parameters should be used if an elastic–perfect plastic model is selected. In addition, excavation-induced seepage has only a limited effect on vertical displacements. Delayed installation of 3rd level struts and base slab construction caused significant time-dependent (creep) movements during the excavation. Back-analyses show that the dynamic viscosity (Dv) used in the visco-elastic model for creep simulation is in the range of 1.5 × 1015–2.0 × 1015 Pa, but there are still inconsistencies in movements both near to and far from the excavation. Interpreting from observation data, the creep rate of wall movement caused in the non-supported stage of the excavation varies between 0.14 and 0.38 mm/day. Finally, parametric studies of interface elements indicate that the most sensitive parameters are the normal (Kn) and shear stiffness (Ks) of the interface. Back-analyses using an elastic–perfect plastic model indicate that using 3 × 106 Pa for Kn and Ks produces more acceptable results. 相似文献
20.
Diffusion parameters for HTO, 36Cl−, and 125I− were determined on Upper Toarcian argillite samples from the Tournemire Underground Research Laboratory (Aveyron, France) using the through diffusion technique. The direction of diffusion was parallel to the bedding plane. The purpose of the present study was 3-fold; it was intended (i) to confirm the I− interaction with Upper Toarcian argillite and to verify the effects of initial I− concentration on this affinity, as previously observed by means of radial diffusion experiments, (ii) to highlight any discrepancy between Cl− and I− diffusivity, and (iii) to investigate the effect of an increase of the ionic strength of the solution on the anionic tracers’ diffusive behaviour. The results show that the effective diffusion coefficient (De) and diffusion accessible porosity (εa) values obtained with an ionic strength (I.S.) synthetic pore water of 0.01 eq L−1 are: De = 2.35–2.50 × 10−11 m2 s−1 and εa = 12.0–15.0% for HTO, and De = 14.5–15.5 × 10−13 m2 s−1 and εa = 2.5–2.9% for 36Cl−. Because of anionic exclusion effects, anions diffuse slower and exhibit smaller diffusion accessible porosities than HTO, taken as a water tracer. The associated effective diffusion coefficient (De) and rock capacity factor (α) obtained for 125I are: De = 7.00–8.60 × 10−13 m2 s−1 and α = 4.3–7.2%. Such values make it possible to calculate low 125I distribution ratios (0.0057 < RD < 0.0192 mL g−1) which confirm the trend indicating that the 125I rock capacity factor increases with the decrease of the initial I− concentration. Additional through-diffusion experiments were carried out with a higher ionic strength synthetic pore water (I.S. = 0.11 eq L−1). No evolution of HTO diffusion parameters was observed. The anionic tracers’ effective diffusion coefficient increased by a factor of two but no clear evolution of their accessible porosity was observed. Such a paradox could be related to the particularly small mean pore size of the Upper Toarcian argillite of Tournemire. The most significant finding of this study is the large discrepancy (factor of two) between the values of the effective diffusion coefficient for 125I and 36Cl. Whatever the ionic strength of the synthetic solution used, 125I exhibited De values two times lower than those of 36Cl. A detailed explanation for this difference cannot be given at present even if a hypothesis based on ion-pairing or on steric-exclusion cannot be excluded. This makes questionable the assumption usually made for quantifying 125I sorption and postulating that 36Cl and 125I would diffuse in the same porosity. In other terms, at Tournemire, 125I sorption could be more pronounced than previously indicated. 相似文献