Role of water in hydrocarbon generation from Type-I kerogen in Mahogany oil shale of the Green River Formation

Hydrous and anhydrous closed-system pyrolysis experiments were conducted on a sample of Mahogany oil shale (Eocene Green River Formation) containing Type-I kerogen to determine whether the role of water had the same effect on petroleum generation as reported for Type-II kerogen in the Woodford Shale. The experiments were conducted at 330 and 350 °C for 72 h to determine the effects of water during kerogen decomposition to polar-rich bitumen and subsequent bitumen decomposition to hydrocarbon-rich oil. The results showed that the role of water was more significant in bitumen decomposition to oil at 350 °C than in kerogen decomposition to bitumen at 330 °C. At 350 °C, the hydrous experiment generated 29% more total hydrocarbon product and 33% more C₁₅₊ hydrocarbons than the anhydrous experiment. This is attributed to water dissolved in the bitumen serving as a source of hydrogen to enhance thermal cracking and facilitate the expulsion of immiscible oil. In the absence of water, cross linking is enhanced in the confines of the rock, resulting in formation of pyrobitumen and molecular hydrogen. These differences are also reflected in the color and texture of the recovered rock. Despite confining liquid-water pressure being 7-9 times greater in the hydrous experiments than the confining vapor pressure in the anhydrous experiments, recovered rock from the former had a lighter color and expansion fractures parallel to the bedding fabric of the rock. The absence of these open tensile fractures in the recovered rock from the anhydrous experiments indicates that water promotes net-volume increase reactions like thermal cracking over net-volume decrease reactions like cross linking, which results in pyrobitumen. The results indicate the role of water in hydrocarbon and petroleum formation from Type-I kerogen is significant, as reported for Type-II kerogen.     

Origin of low-molecular-weight alkylthiophenes in pyrolysates of sulphur-rich kerogens as revealed by micro-scale sealed vessel pyrolysis

Micro-scale sealed vessel (MSSV) pyrolysis experiments have been conducted at temperatures of 150, 200, 250, 300, 330 and 350°C for various times on a thermally immature Type II-S kerogen from the Maastrichtian Jurf ed Darawish Oil Shale (Jordan) in order to study the origin of low-molecular-weight (LMW) alkylthiophenes. These experiments indicated that the LMW alkylthiophenes usually encountered in the flash pyrolysates of sulphur-rich kerogens are also produced at much lower pyrolysis temperatures (i.e. as low as 150°C) as the major (apart from hydrogen sulfide) sulphur-containing pyrolysis products. MSSV pyrolysis of a long-chain alkylthiophene and an alkylbenzene indicated that at 300°C for 72 h no β-cleavage leading to generation of LMW alkylated thiophenes and benzene occurs. In combination with the substantial production of LMW alkylthiophenes with a linear carbon skeleton at these conditions, this indicated that these thiophenes are predominantly formed by thermal degradation of multiple (poly)sulfide-bound linear C₅–C₇ skeletons, which probably mainly originate from sulphurisation of carbohydrates during early diagenesis. LMW alkylthiophenes with linear carbon skeletons seem to be unstable at MSSV pyrolysis temperatures of ≥330°C either due to thermal degradation or to methyl transfer reactions. LMW alkylthiophenes with a branched carbon skeleton most likely derive from both multiple (poly)sulfide-bound branched C₅–C₇ skeletons and alkylthiophene units present in the kerogen.     

Evaluating transition-metal catalysis in gas generation from the Permian Kupferschiefer by hydrous pyrolysis

Transition metals in source rocks have been advocated as catalysts in determining extent, composition, and timing of natural gas generation (Mango, F. D. (1996) Transition metal catalysis in the generation of natural gas. Org. Geochem.24, 977-984). This controversial hypothesis may have important implications concerning gas generation in unconventional shale-gas accumulations. Although experiments have been conducted to test the metal-catalysis hypothesis, their approach and results remain equivocal in evaluating natural assemblages of transition metals and organic matter in shale. The Permian Kupferschiefer of Poland offers an excellent opportunity to test the hypothesis with immature to marginally mature shale rich in both transition metals and organic matter. Twelve subsurface samples containing similar Type-II kerogen with different amounts and types of transition metals were subjected to hydrous pyrolysis at 330° and 355 °C for 72 h. The gases generated in these experiments were quantitatively collected and analyzed for molecular composition and stable isotopes. Expelled immiscible oils, reacted waters, and spent rock were also quantitatively collected. The results show that transition metals have no effect on methane yields or enrichment. δ¹³C values of generated methane, ethane, propane and butanes show no systematic changes with increasing transition metals. The potential for transition metals to enhance gas generation and oil cracking was examined by looking at the ratio of the generated hydrocarbon gases to generated expelled immiscible oil (i.e., GOR), which showed no systematic change with increasing transition metals. Assuming maximum yields at 355 °C for 72 h and first-order reaction rates, pseudo-rate constants for methane generation at 330 °C were calculated. These rate constants showed no increase with increasing transition metals. The lack of a significant catalytic effect of transition metals on the extent, composition, and timing of natural gas generation in these experiments is attributed to the metals not occurring in the proper form or the poisoning of potential catalytic microcosms by polar-rich bitumen, which impregnates the rock matrix during the early stages of petroleum formation.     

两种热模拟体系下有机质生气特征对比

对海相Ⅱ1型有机质在封闭体系和开放体系下开展了产气率热模拟实验,并对其在两种体系下的产气率和生气模式进行了对比研究。在开放体系下,样品产气率较低,Ⅱ1型有机质产气率为84.2m3/吨·TOC,但在封闭体系下实验热模拟产气率很高,Ⅱ1型有机质产气率可达371.2m3/吨.TOC;在开放体系下Ⅱ1型有机质大量生气阶段R o为1.0%～1.5%之间,在封闭体系下Ⅱ1型有机质大量生气阶段在R o在1.5%～2.5%之间。在不同实验体系下有机质产气率和生气模式的差异主要与有机质的生气机理有关,在开放体系下有机质主要为干酪根裂解气,而在封闭体系下有机质生成的天然气为原油和干酪根裂解的混合气。     

An experimental study of the solubility of baddeleyite (ZrO2) in fluoride-bearing solutions at elevated temperature

The solubility of baddeleyite (ZrO₂) and the speciation of zirconium have been investigated in HF-bearing aqueous solutions at temperatures up to 400 °C and pressures up to 700 bar. The data obtained suggest that in HF-bearing solutions zirconium is transported mainly in the form of the hydroxyfluoride species ZrF(OH)₃° and ZrF₂(OH)₂°. Formation constants determined for these species (Zr⁴⁺ + nF⁻ + mOH⁻ = ZrF_n(OH)_m°) range from 43.7 at 100 °C to 46.41 at 400 °C for ZrF(OH)₃°, and from 37.25 at 100 °C to 43.88 at 400 °C for ZrF₂(OH)₂°.Although the solubility of ZrO₂ is retrograde with respect to temperature, the measured concentrations of Zr are orders of magnitude higher than those predicted from theoretical extrapolations based on simple fluoride species (ZrF³⁺-ZrF₆²⁻). Model calculations performed for zircon show that zirconium can be transported by aqueous fluids in concentrations sufficient to account for the concentration of this metal at conditions commonly encountered in fluoride-rich natural hydrothermal systems.     

Evaluation of the petroleum composition and quality with increasing thermal maturity as simulated by hydrous pyrolysis: A case study using a Brazilian source rock with Type I kerogen

Hydrous pyrolysis (HP) experiments were used to investigate the petroleum composition and quality of petroleum generated from a Brazilian lacustrine source rock containing Type I kerogen with increasing thermal maturity. The tested sample was of Aptian age from the Araripe Basin (NE-Brazil). The temperatures (280–360 °C) and times (12–132 h) employed in the experiments simulated petroleum generation and expulsion (i.e., oil window) prior to secondary gas generation from the cracking of oil. Results show that similar to other oil prone source rocks, kerogen initially decomposes in part to a polar rich bitumen, which decomposes in part to hydrocarbon rich oil. These two overall reactions overlap with one another and have been recognized in oil shale retorting and natural petroleum generation. During bitumen decomposition to oil, some of the bitumen is converted to pyrobitumen, which results in an increase in the apparent kerogen (i.e., insoluble carbon) content with increasing maturation.The petroleum composition and its quality (i.e., API gravity, gas/oil ratio, C₁₅₊ fractions, alkane distribution, and sulfur content) are affected by thermal maturation within the oil window. API gravity, C₁₅₊ fractions and gas/oil ratios generated by HP are similar to those of natural petroleum considered to be sourced from similar Brazilian lacustrine source rocks with Type I kerogen of Lower Cretaceous age. API gravity of the HP expelled oils shows a complex relationship with increasing thermal maturation that is most influenced by the expulsion of asphaltenes. C₁₅₊ fractions (i.e., saturates, aromatics, resins and asphaltenes) show that expelled oils and bitumen are compositionally separate organic phases with no overlap in composition. Gas/oil ratios (GOR) initially decrease from 508–131 m³/m³ during bitumen generation and remain essentially constant (81–84 m³/m³) to the end of oil generation. This constancy in GOR is different from the continuous increase through the oil window observed in anhydrous pyrolysis experiments. Alkane distributions of the HP expelled oils are similar to those of natural crude oils considered to be sourced from similar Brazilian lacustrine source rocks with Type I kerogen of Lower Cretaceous age. Isoprenoid and n-alkane ratios (i.e., pristane/n-C₁₇ and phytane/n-C₁₈) decrease with increasing thermal maturity as observed in natural crude oils. Pristane/phytane ratios remain constant with increasing thermal maturity through the oil window, with ratios being slightly higher in the expelled oils relative to those in the bitumen. Generated hydrocarbon gases are similar to natural gases associated with crude oils considered to be sourced from similar Brazilian lacustrine source rocks with Type I kerogen of Lower Cretaceous, with the exception of elevated ethane contents. The general overall agreement in composition of natural and hydrous pyrolysis petroleum of lacustrine source rocks observed in this study supports the utility of HP to better characterize petroleum systems and the effects of maturation and expulsion on petroleum composition and quality.     

A chemical and thermodynamic model of oil generation in hydrocarbon source rocks

Thermodynamic calculations and Gibbs free energy minimization computer experiments strongly support the hypothesis that kerogen maturation and oil generation are inevitable consequences of oxidation/reduction disproportionation reactions caused by prograde metamorphism of hydrocarbon source rocks with increasing depth of burial.These experiments indicate that oxygen and hydrogen are conserved in the process.Accordingly, if water is stable and present in the source rock at temperatures ?25 but ?100 °C along a typical US Gulf Coast geotherm, immature (reduced) kerogen with a given atomic hydrogen to carbon ratio (H/C) melts incongruently with increasing temperature and depth of burial to produce a metastable equilibrium phase assemblage consisting of naphthenic/biomarker-rich crude oil, a type-II/III kerogen with an atomic hydrogen/carbon ratio (H/C) of ∼1, and water. Hence, this incongruent melting process promotes diagenetic reaction of detritus in the source rock to form authigenic mineral assemblages.However, in the water-absent region of the system CHO (which is extensive), any water initially present or subsequently entering the source rock is consumed by reaction with the most mature kerogen with the lowest H/C it encounters to form CO₂ gas and a new kerogen with higher H/C and O/C, both of which are in metastable equilibrium with one another.This hydrolytic disproportionation process progressively increases both the concentration of the solute in the aqueous phase, and the oil generation potential of the source rock; i.e., the new kerogen can then produce more crude oil.Petroleum is generated with increasing temperature and depth of burial of hydrocarbon source rocks in which water is not stable in the system CHO by a series of irreversible disproportionation reactions in which kerogens with higher (H/C)s melt incongruently to produce metastable equilibrium assemblages consisting of crude oil, CO₂ gas, and a more mature (oxidized) kerogen with a lower H/C which in turn melts incongruently with further burial to produce more crude oil, CO₂ gas, and a kerogen with a lower H/C and so forth.The petroleum generated in the process progresses from heavy naphthenic crude oils at low temperatures to mature petroleum at ∼150 °C. For example, the results of Computer Experiment 27 (see below) indicate that the overall incongruent melting reaction in the water-absent region of the system C-H-O at 150 °C and a depth of ∼4.3 km of an immature type-II/III kerogen with a bulk composition represented by C₂₉₂H₂₈₈O_12(c) to produce a mature (oxidized) kerogen represented by C₁₂₈H₆₈O_7(c), together with a typical crude oil with an average metastable equilibrium composition corresponding to C_8.8H_16.9 (C_8.8H_16.9(l)) and CO₂ gas (CO_2(g)) can be described by writing

(A)     

The separate production of H2S from the thermal reaction of hydrocarbons with magnesium sulfate and sulfur: Implications for thermal sulfate reduction

The yields and stable C and H isotopic composition of gaseous products from the reactions of pure n-C₂₄ with (1) MgSO₄; and (2) elemental S in sealed Au-tubes at a series of temperatures over the range 220–600 °C were monitored to better resolve the reaction mechanisms. Hydrogen sulfide formation from thermochemical sulfate reduction (TSR) of n-C₂₄ with MgSO₄ was initiated at 431 °C, coincident with the evolution of C₂–C₅ hydrocarbons. Whereas the yields of H₂S increased progressively with pyrolysis temperature, the hydrocarbon yields decreased sharply above 490 °C due to subsequent S consumption. Ethane and propane were initially very ¹³C depleted, but became progressively heavier with pyrolysis temperature and were more ¹³C enriched than the values of a control treatment conducted on just n-C₂₄ above 475 °C. TSR of MgSO₄ also led to progressively higher concentrations of CO₂ showing relatively low δ¹³C values, possibly due to input of isotopically light CO₂ derived from gaseous hydrocarbon oxidation (e.g., more depleted CH₄).     

Dike intrusions into bituminous coal, Illinois Basin: H, C, N, O isotopic responses to rapid and brief heating

Unlike long-term heating in subsiding sedimentary basins, the near-instantaneous thermal maturation of sedimentary organic matter near magmatic intrusions is comparable to artificial thermal maturation in the laboratory in terms of short duration and limited extent. This study investigates chemical and H, C, N, O isotopic changes in high volatile bituminous coal near two Illinois dike contacts and compares observed patterns and trends with data from other published studies and from artificial maturation experiments. Our study pioneers in quantifying isotopically exchangeable hydrogen and measuring the D/H (i.e., ²H/¹H) ratio of isotopically non-exchangeable organic hydrogen in kerogen near magmatic contacts. Thermal stress in coal caused a reduction of isotopically exchangeable hydrogen in kerogen from 5% to 6% in unaltered coal to 2-3% at contacts, mostly due to elimination of functional groups (e.g., OH, COOH, NH₂). In contrast to all previously published data on D/H in thermally matured organic matter, the more mature kerogen near the two dike contacts is D-depleted, which is attributed to (i) thermal elimination of D-enriched functional groups, and (ii) thermal drying of hydrologically isolated coal prior to the onset of cracking reactions, thereby precluding D-transfer from relatively D-enriched water into kerogen. Maxima in organic nitrogen concentration and in the atomic N/C ratio of kerogen at a distance of ∼2.5 to ∼3.5 m from the thicker dike indicate that reactive N-compounds had been pyrolytically liberated at high temperature closer to the contact, migrated through the coal seam, and recombined with coal kerogen in a zone of lower temperature. The same principle extends to organic carbon, because a strong δ¹³C_kerogen vs. δ¹⁵N_kerogen correlation across 5.5 m of coal adjacent to the thicker dike indicates that coal was functioning as a flow-through reactor along a dynamic thermal gradient facilitating back-reactions between mobile pyrolysis products from the hot zone as they encounter less hot kerogen. Vein and cell filling carbonate is most abundant in highest rank coals where carbonate δ¹³C_VPDB and δ¹⁸O_VSMOW values are consistent with thermal generation of ¹³C-depleted and ¹⁸O-enriched CO₂ from decarboxylation and pyrolysis of organic matter. Lower background concentrations of ¹³C-enriched carbonate in thermally unaffected coal may be linked to ¹³C-enrichment in residual CO₂ in the process of CO₂ reduction via microbial methanogenesis.Our compilation and comparison of available organic H, C, N isotopic findings on magmatic intrusions result in re-assessments of majors factors influencing isotopic shifts in kerogen during magmatic heating. (i) Thermally induced shifts in organic δD values of kerogen are primarily driven by the availability of water or steam. Hydrologic isolation (e.g., near Illinois dikes) results in organic D-depletion in kerogen, whereas more common hydrologic connectivity results in organic D-enrichment. (ii) Shifts in kerogen (or coal) δ¹³C and δ¹⁵N values are typically small and may follow sinusoidal patterns over short distances from magmatic contacts. Laterally limited sampling strategies may thus result in misleading and non-representative data. (iii) Fluid transport of chemically active, mobile carbon and nitrogen species and recombination reactions with kerogen result in isotopic changes in kerogen that are unrelated to the original, autochthonous part of kerogen.     

Release of sulfur- and oxygen-bound components from a sulfur-rich kerogen during simulated maturation by hydrous pyrolysis

An immature sulfur-rich marl from the Gessosso-solfifera Formation of the Vena del Gesso Basin (Messinian, Italy) has been subjected to hydrous pyrolysis (160 to 330°C) to simulate maturation under natural conditions. The kerogen of the unheated and heated samples was isolated and the hydrocarbons released by selective chemical degradation (Li/EtNH₂ and HI/LiAlH₄) were analysed to allow a study of the fate of sulfur- and oxygen-bound species with increasing temperature. The residues from the chemical treatments were also subjected to pyrolysis–GC to follow structural changes in the kerogens. In general, with increasing hydrous pyrolysis temperature, the amounts of sulfide- and ether-bound components in the kerogen decreased significantly. At the temperature at which the generation of expelled oil began (260°C), almost all of the bound components initially present in the unheated sample were released from the kerogen. Comparison with an earlier study of the extractable organic matter using a similar approach and the same samples provides molecular evidence that, with increasing maturation, solvent-soluble macromolecular material was initially released from the kerogen, notably as a result of thermal cleavage of weak carbon–heteroatom bonds (sulfide, ester, ether) even at temperatures as low as 220°C. This solvent-soluble macromolecular material then underwent thermal cleavage to generate hydrocarbons at higher temperatures. This early generation of bitumen may explain the presence of unusually high amounts of extractable organic matter of macromolecular nature in very immature S-rich sediments.     

Biomarker and isotopic signatures of an early Cambrian Lagerstätte in the Stansbury Basin, South Australia

The lower Cambrian (Series 2) Emu Bay Shale biota, found at Big Gully on the north coast of Kangaroo Island, South Australia, is by far the richest Burgess Shale-type (BST) fauna in the southern hemisphere. While the trace element geochemistry of the host shale shows it accumulated beneath an oxic water column, this appears difficult to reconcile with the exceptional preservation of organs such as gut glands, muscles and eyes in some of its fauna. Micro-scale sealed vessel (MSSV) pyrolysis of kerogen isolated from a solvent extracted sample of fossiliferous Emu Bay Shale provided independent confirmation of its redox status and also implicated cyanobacteria in the preservation of its fauna. Thermal extraction and pyrolysis each yielded alkanes displaying a low ratio of pristane to phytane (pr/ph = 1) and n-alkanes with a marked odd/even predominance in the <C₂₀ range. The latter molecular signature is diagnostic of Gloeocapsomorpha prisca and is the first indication that mats of this or a similar coccoid cyanobacterium were involved in the taphonomy of a BST deposit. Hopanes (including 2-methylhopanes) are far more abundant than steranes and the shale’s bulk organic matter has δ¹³C values in the range −32‰ to −28‰, providing further evidence of the cyanobacterial affinity of its microbial biomass. Thus mat-forming cyanophytes, rather than sulfur-oxidising bacteria, may have played a key role in maintaining a sharp redox boundary at the sediment-water interface during deposition of the Emu Bay Shale Lagerstätte, thereby enabling the survival of soft body parts within its fossil fauna for long enough to permit inorganic replication of their fine detail during late diagenesis.     

The effect of oil expulsion or retention on further thermal degradation of kerogen at the high maturity stage: A pyrolysis study of type II kerogen from Pingliang shale,China

High maturity oil and gas are usually generated after primary oil expulsion from source rocks, especially from oil prone type I/II kerogen. However, the detailed impacts of oil expulsion, or retention in source rock on further thermal degradation of kerogen at the high maturity stage remain unknown. In the present study, we collected an Ordovician Pingliang shale sample containing type II kerogen. The kerogens, which had previously generated and expelled oil and those which had not, were prepared and pyrolyzed in a closed system, to observe oil expulsion or oil retention effects on later oil and gas generation from kerogen. The results show that oil expulsion and retention strongly impacts on further oil and gas generation in terms of both the amount and composition in the high maturity stage. Gas production will be reduced by 50% when the expulsion coefficient reaches 58%, and gas from oil-expelled kerogen (less oil retained) is much drier than that from fresh kerogen. The oil expulsion also causes n-alkanes and gas compounds to have heavier carbon isotopic compositions at high maturity stages. The enrichment of ¹³C in n-alkanes and gas hydrocarbons are 1‰ and 4–6‰ respectively, compared to fresh kerogen. Oil expulsion may act as open system opposite to the oil retention that influences the data pattern in crossplots of δ¹³C₂–δ¹³C₃ versus C₂/C₃, δ¹³C₂–δ¹³C₃ versus δ¹³C₁ and δ¹³C₁–δ¹³C₂ versus ln(C₁/C₂), which are widely used for identification of gas from kerogen cracking or oil cracking. These results suggest that the reserve estimation and gas/source correlation in deep burial basins should consider the proportion of oil retention to oil expulsion the source rocks have experienced.     

Insights into oil cracking based on laboratory experiments

The objectives of this pyrolysis investigation were to determine changes in (1) oil composition, (2) gas composition and (3) gas carbon isotope ratios and to compare these results with hydrocarbons in reservoirs. Laboratory cracking of a saturate-rich Devonian oil by confined, dry pyrolysis was performed at T=350–450 °C, P=650 bars and times ranging from 24 h to 33 days. Increasing thermal stress results in the C₁₅₊ hydrocarbon fraction cracking to form C_6–14 and C_1–5 hydrocarbons and pyrobitumen. The C_6–14 fraction continues to crack to C_1–5 gases plus pyrobitumen at higher temperatures and prolonged heating time and the δ ¹³C_ethane–δ¹³C_propane difference becomes greater as oil cracking progresses. There is considerable overlap in product generation and product cracking. Oil cracking products accumulate either because the rate of generation of any product is greater than the rate of removal by cracking of that product or because the product is a stable end member under the experimental conditions. Oil cracking products decrease when the amount of product generated from a reactant is less than the amount of product cracked. If pyrolysis gas compositions are representative of gases generated from oil cracking in nature, then understanding the processes that alter natural gas composition is critical.     

Thermal evolution of n- and iso-alkanes in oils. Part 1: Pyrolysis model for a mixture of 78 alkanes (C1-C32) including 13,206 free radical reactions

A mechanistic model consisting of 13,206 lumped free radical reactions has been developed to describe the thermal evolution of a mixture of 78 alkanes: all n-alkanes from C₁ to C₃₂ and 46 branched alkane model compounds from C₄ to C₃₂. The mixture was meant to represent the major part of the saturated fraction of petroleum. The rate constants used are available from the literature. The lumping together procedure is described and the model validated on the basis of several experimental results from the literature and relating to pure alkanes. The model is also compared to the saturated fraction obtained from pyrolysis of Elgin oil at 372 °C for up to 1000 h. The cracking global activation energy of n-C₁₅ as well as iso-C₁₅ is close to 69 kcal/mol in the range 200-350 °C. The implications of the model for geological reservoirs will be discussed in a following paper.     

Role of minerals in the thermal alteration of organic matter—I: Generation of gases and condensates under dry condition

Pyrolysis experiments were carried out on Monterey formation kerogen and bitumen and Green River formation kerogen (Type II and I, respectively), in the presence and absence of montmorillonite, illite and calcite at 200 and 300°C for 2–2000 hours. The pyrolysis products were identified and quantified and the results of the measurements on the gas and condensate range are reported here.A significant catalytic effect was observed for the pyrolysis of kerogen with montmorillonite, whereas small or no effects were observed with illite and calcite, respectively. Catalytic activity was evident by the production of up to five times higher C₁–C₆ hydrocarbons for kerogen with montmorillonite than for kerogen alone, and by the dominance of branched hydrocarbons in the C₄–C₆ range (up to 90% of the total amount at any single carbon number). This latter effect in the presence of montmorillonite is attributed to cracking via a carbonium-ion [carbocation] intermediate which forms on the acidic sites of the clay. No catalytic effect, however, was observed for generation of methane and C₂ hydrocarbons which form by thermal cracking. The catalysis of montmorillonite was significantly greater during pyrolysis of bitumen than for kerogen, which may point to the importance of the early formed bitumen as an intermediate in the production of low molecular weight hydrocarbons. Catalysis by minerals was also observed for the production of carbon dioxide.These results stress the importance of the mineral matrix in determining the type and amount of gases and condensates forming from the associated organic matter under thermal stress. The literature contains examples of gas distributions in the geologic column which can be accounted for by selective mineral catalysis, mainly during early stages of organic matter maturation.     

Experiments on δS mixing between organic and inorganic sulfur species during thermal maturation

Reduced sulfur species were studied to constrain isotopic exchange-mixing with synthetic polysulfide cross-linked macromolecules (PCLM), model sulfur containing molecules and natural sulfur-rich kerogen, asphalt and oil of the Dead Sea area. PCLM represents protokerogens that are rich in sulfur and thermally unstable. Mixing rates of PCLM with (added as (NH₄)₂S_(aq)) at low to moderate temperatures (50-200 °C) are rapid. Elemental sulfur and H₂S_(gas) fully mix isotopes with PCLM during pyrolysis conditions at 200 °C. During these reactions significant structural changes of the PCLM occur to form polysulfide dimers, thiolanes and thiophenes. As pyrolysis temperatures or reaction times increase, the PCLM thermal products are transformed to more aromatic sulfur compounds. Isotopic mixing rates increase with increasing pyrolysis temperature and time. Polysulfide bonds (S-S) in the PCLM are responsible for most of these structural and isotopic changes because of their low stability. Conversely, sulfur isotope mixing does not occur between dibenzothiophene (aromatic S) or hexadecanthiol (C-SH) and at 200 °C after 48 h. This shows that rates of sulfur isotope mixing are strongly dependent on the functionality of the sulfur in the organic matter. The order of isotopic mixing rates for organic matter is kerogen > asphalt > oil, which is inverse to their sulfur thermal stability. Asphalt and oil with more refractory sulfur show significantly lower isotopes mixing rates than the kerogen with more labile sulfur. Based on the findings of the present study we suggest that sulfur isotopes mixing can occur from early diagenesis into catagenesis and result in isotopic homogenization of the inorganic and organic reduced sulfur pools.     

Comparison of natural gases accumulated in Oligocene strata with hydrous pyrolysis gases from Menilite Shales of the Polish Outer Carpathians

This study examined the molecular and isotopic compositions of gases generated from different kerogen types (i.e., Types I/II, II, IIS and III) in Menilite Shales by sequential hydrous pyrolysis experiments. The experiments were designed to simulate gas generation from source rocks at pre-oil-cracking thermal maturities. Initially, rock samples were heated in the presence of liquid water at 330 °C for 72 h to simulate early gas generation dominated by the overall reaction of kerogen decomposition to bitumen. Generated gas and oil were quantitatively collected at the completion of the experiments and the reactor with its rock and water was resealed and heated at 355 °C for 72 h. This condition simulates late petroleum generation in which the dominant overall reaction is bitumen decomposition to oil. This final heating equates to a cumulative thermal maturity of 1.6% R_r, which represents pre-oil-cracking conditions. In addition to the generated gases from these two experiments being characterized individually, they are also summed to characterize a cumulative gas product. These results are compared with natural gases produced from sandstone reservoirs within or directly overlying the Menilite Shales. The experimentally generated gases show no molecular compositions that are distinct for the different kerogen types, but on a total organic carbon (TOC) basis, oil prone kerogens (i.e., Types I/II, II and IIS) generate more hydrocarbon gas than gas prone Type III kerogen. Although the proportionality of methane to ethane in the experimental gases is lower than that observed in the natural gases, the proportionality of ethane to propane and i-butane to n-butane are similar to those observed for the natural gases. δ¹³C values of the experimentally generated methane, ethane and propane show distinctions among the kerogen types. This distinction is related to the δ¹³C of the original kerogen, with ¹³C enriched kerogen generating more ¹³C enriched hydrocarbon gases than kerogen less enriched in ¹³C. The typically assumed linear trend for δ¹³C of methane, ethane and propane versus their reciprocal carbon number for a single sourced natural gas is not observed in the experimental gases. Instead, the so-called “dogleg” trend, exemplified by relatively ¹³C depleted methane and enriched propane as compared to ethane, is observed for all the kerogen types and at both experimental conditions. Three of the natural gases from the same thrust unit had similar “dogleg” trends indicative of Menilite source rocks with Type III kerogen. These natural gases also contained varying amounts of a microbial gas component that was approximated using the Δδ¹³C for methane and propane determined from the experiments. These approximations gave microbial methane components that ranged from 13–84%. The high input of microbial gas was reflected in the higher gas:oil ratios for Outer Carpathian production (115–1568 Nm³/t) compared with those determined from the experiments (65–302 Nm³/t). Two natural gas samples in the far western part of the study area had more linear trends that suggest a different organic facies of the Menilite Shales or a completely different source. This situation emphasizes the importance of conducting hydrous pyrolysis on samples representing the complete stratigraphic and lateral extent of potential source rocks in determining specific genetic gas correlations.     

The effect of aqueous diffusion on the fractionation of chlorine and bromine stable isotopes

Diffusive isotopic fractionation factors are important in order to understand natural processes and have practical application in radioactive waste storage and carbon dioxide sequestration. We determined the isotope fractionation factors and the effective diffusion coefficients of chloride and bromide ions during aqueous diffusion in polyacrylamide gel. Diffusion was determined as functions of temperature, time and concentration. The effect of temperature is relatively large on the diffusion coefficient (D) but only small on isotope fractionation. For chlorine, the ratio, D_³⁵Cl/D_³⁷Cl varied from 1.00128 ± 0.00017 (1σ) at 2 °C to 1.00192 ± 0.00015 at 80 °C. For bromine, D_⁷⁹Br/D_⁸¹Br varied from 1.00098 ± 0.00009 at 2 °C to 1.0064 ± 0.00013 at 21 °C and 1.00078 ± 0.00018 (1σ) at 80 °C. There were no significant effects on the isotope fractionation due to concentration. The lack of sensitivity of the diffusive isotope fractionation to anything at the most common temperatures (0 to 30 °C) makes it particularly valuable for application to understanding processes in geological environments and an important natural tracer in order to understand fluid transport processes.     

Experimentally determined biomediated Sr partition coefficient for dolomite: Significance and implication for natural dolomite

Two strains of moderately halophilic bacteria were grown in aerobic culture experiments containing gel medium to determine the Sr partition coefficient between dolomite and the medium from which it precipitates at 15 to 45 °C. The results demonstrate that Sr incorporation in dolomite does occur not by the substitution of Ca, but rather by Mg. They also suggest that Sr partitioning between the culture medium and the minerals is better described by the Nernst equation (D_Sr^dol = Sr_dol/Sr_bmi), instead of the Henderson and Kracek equation (D_Sr^dol = (Sr/Ca)_dol/(Sr/Ca)_solution. The maximum value for D_Sr^dol occurs at 15 °C in cultures with and without sulfate, while the minimum values occur at 35 °C, where the bacteria exhibit optimal growth. For experiments at 25, 35 and 45 °C, we observed that D_Sr^dol values are greater in cultures with sulfate than in cultures without sulfate, whereas D_Sr^dol values are smaller in cultures with sulfate than in cultures without sulfate at 15 °C.Together, our observations suggest that D_Sr^dol is apparently related to microbial activity, temperature and sulfate concentration, regardless of the convention used to assess the D_Sr^dol. These results have implications for the interpretation of depositional environments of ancient dolomite. The results of our culture experiments show that higher Sr concentrations in ancient dolomite could reflect microbial mediated primary precipitation. In contrast, previous interpretations concluded that high Sr concentrations in ancient dolomites are an indication of secondary replacement of aragonite, which incorporates high Sr concentrations in its crystal lattice, reflecting a diagenetic process.     

Simulation of the fluorescence evolution of “live” oils from kerogens in a diamond anvil cell: Application to inclusion oils in terms of maturity and source

The evolution of fluorescence has been measured for “live” oils generated from 14 oil-prone kerogens or coals from varying depositional environments during closed system pyrolysis in a diamond anvil cell at three heating rates (3, 8, and 25 °C/min), and temperatures up to 600 °C. The measured fluorescence intensities of the samples, employing using violet excitation at 405 nm, increases significantly during maturation intervals within the oil window, while the fluorescence spectra of oils generated from all studied kerogens exhibit progressive blue-shift of peak wavelengths (λ_max) and red/green quotients (I₆₅₀/I₅₀₀) upon increasing maturity. The observed trend is consistent with a maturity dependence of the spectral shift, which is widely recognized in natural hydrocarbon inclusions and crude oils using ultraviolet (UV) excitation (365 nm). The data presented herein suggest that the λ_max of spectra for inclusion oils shift in similar direction despite differences in composition or source kerogen. This implies that the reverse or anomalous trends reported for inclusion oils in nature may be attributed to other processes, which significantly alters the fluorescence properties of oils subsequent to their generation. Oils with the similar color (λ_max or I₆₅₀/I₅₀₀) can be derived from diverse kerogens with maturities that vary by ±0.3% Ro, suggesting that the fluorescent colors of crude and inclusion oils are both maturity- and source-dependent, and therefore cannot be used as universal maturity indicators. In addition, the blue-shifts observed for cumulative oils generated from all kerogens approaches similar minima λ_max values around the green-yellow wavelength (564 nm) and at I₆₅₀/I₅₀₀ values around 0.6, at maturities close to the middle or late stage of oil generation. This suggests that most late-stage cumulative oils will exhibit similar colors. Oils generated during late-stage maturity intervals, however, can exhibit colors with shorter wavelengths.