Characteristics of pegmatoidal granite exposed near Bayalan,Ajmer district,Rajasthan

The study involves the characterization of pegmatoidal granite, southeast of Beawar, Ajmer district, Rajasthan. Earlier researchers had described this granite as part of the BGC, basement to the Bhim Group of the Delhi Super Group rocks. However, the present study indicates that it is younger than the rocks of Bhim Group of South Delhi Fold Belt, into which it is intrusive. The intrusion is structurally controlled and the outcrop pattern is phacolithic. The granite had intruded post-D₂ deformation of the Delhi orogeny along the axial planes of D₂ folds. The intrusion has also resulted in the formation of a contact aureole about the calc gneisses.     

Deformational and crystallization history of the Precambrian rocks in north-central Aravalli Mountain,Rajasthan, India

Large-scale structures, textures and mineral assemblages in the Precambrian rocks of the Banded Gneissic Complex and the overlying Delhi Group in north-central Aravalli Mountain reveal a complex deformational-crystallization history. In the basement Gneissic Complex at least three deformational events, D₀, D₁ and D₂, and two separate episodes of metamorphism, M₁ and M₂, are recognized. The supracrustal Delhi Rocks display only two phases of deformation, D₁ and D₂, associated with a single protracted period of metamorphism, M₂.The first phase of deformation (D₁) of the Delhi orogeny (1650-900 m.y.) produced large isoclinal folds that are overturned towards the southeast and have gentle plunges in NE and SW directions. The second phase of deformation (D₂) gave rise to tight open folds on the limbs and axial-plane surfaces of the D₁ folds. These folds generally plunge towards the N and NNW at 30°–80°. In the Basement Complex one more deformation (D₀) of the Pre-Delhi orogeny (> 2000 m.y.) is recorded by the presence of reclined and recumbent folds with W to WNW trending fold axes. The D₀ folds were superimposed by D₁ and D₂ folds during the Delhi orogeny.The three deformational events have been correlated with the crystallization periods of minerals in the rocks and a setting in time is established for this part of the Aravalli range.     

Thrust-controlled, gold quartz-vein mineralisation at the Tom's Gully mine, Northern Territory, Australia

Metasedimentary and minor metavolcanic rocks of the Early Proterozoic Pine Creek Inlier rest unconformably on Late Archaean granitic basement. Three basin-wide, regional deformation events at ca.1885–1870 Ma are recognised: I) W- to NW-verging thrusts and recumbent folds (D₂), II) upright, open to tight, doubly-plunging, NNE- to NNW-trending folds (D₃), and III) open, upright, E-trending folds (D₄). In the centre of the Pine Creek Inlier, post-tectonic granites (1835–1820 Ma) are spatially, temporally and probably genetically associated with mesothermal gold-quartz vein deposits. The Tom's Gully deposit consists of a shallowly S-dipping quartz reef in graphitic shale and siltstone within the thermal aureole of the post-tectonic (1831 ± 6 Ma) Mt Bundey pluton. Gold mineralisation comprises two(?) SSW-plunging sulphidic ore-shoots which are intimately associated with brecciation and recrystallisation of early barren quartz. Where early quartz is absent from the thrust, gold mineralisation is not developed, indicating that this secondary brittle fracturing was essential to sulphide and gold deposition. The ore-shoots plunge parallel to the trend of D₃ fold axes. The reef is hosted by a D₂ thrust fault with transport to the NW. D₃ folds in the hangingwall and footwall decrease in amplitude toward the reef indicating that, during continued E-W compression, the thrust acted as a décollement zone. Field relationships and microstructural studies suggest that quartz and sulphide were deposited in a reactivated thrust during wrench shear along several NNE-trending faults associated with emplacement of the Mt Bundey pluton.     

Towards a volcanic–structural balance: relative importance of volcanism, folding, and remobilisation of nickel sulphides at the Perseverance Ni–Cu–(PGE) deposit, Western Australia

Perseverance is a world-class, komatiite-hosted nickel sulphide deposit situated in the well-endowed Leinster nickel camp of the Agnew–Wiluna greenstone belt, Western Australia. The mine stratigraphy at Perseverance trends north-northwest (NNW), dips steeply to the west, and is overturned. Stratigraphic footwall units lie along the western margin of the Perseverance Ultramafic Complex (PUC). The PUC comprises a basal nickel sulphide-bearing orthocumulate- to mesocumulate-textured komatiite that is overlain by a thicker, nickel sulphide-poor, dunite lens. Hanging wall rocks include rhyodacite that is texturally and compositionally similar to footwall volcanic rocks. These rocks separate the PUC from a second sequence of nickeliferous, E-facing, spinifex-textured komatiite units (i.e. the East Perseverance komatiite). Past workers argue for a conformable stratigraphic contact between the PUC and the East Perseverance komatiite and conclude that the PUC is extrusive. This study, however, clearly demonstrates that these komatiite sequences are discordant, implying that the PUC may have intruded rhyodacite country rock as a sill with subsequent structural juxtaposition against the East Perseverance komatiite. Early N–S shortening associated with the regional D_I deformation event (corresponding to the local D_P1 to D_P3 events at Perseverance) resulted in the heterogeneous partitioning of strain along the margins of the competent dunite. A mylonite developed in the more ductile footwall rocks along the footwall margin of the PUC, while isoclinal F₃ folds, such as the Hanging wall limb and Felsic Nose folds, formed in low-mean stress domains along the fringes of the elongated dunite lens. Strata-bound massive and disseminated nickel sulphides were passively fold thickened in hinge areas of isoclinal folds, whereas basal massive sulphides lubricated fold limbs and promoted thrust movement along shallowly dipping lithological contacts. Massive sulphides were physically remobilised up to 20 m from their primary footwall position into deposit-scale fold hinges to form the 1A and Felsic Nose orebodies. First-order controls on the geometry of the Perseverance deposit include the thermomechanical erosion of footwall rocks and the channelling of the mineralised komatiitic magma. Second- or third-order controls are several postvolcanic deformation events, which resulted in the progressive folding and shearing of the footwall contact, as well as the passive fold thickening of massive and disseminated sulphide orebodies. Massive sulphides were physically remobilised into multiple generations of fold hinges and shear zones. Important implications for near-mine exploration in the Leinster camp include identifying nickeliferous komatiite units, defining their three-dimensional geometry, and targeting fold hinge areas. Fold plunge directions and stretching lineations are indicators of potential plunge directions of massive sulphide orebodies.     

The nature of the basement in the Archaean Dharwar craton of southern India and the age of the Peninsular Gneiss

The Archaean Peninsular Gneiss of southern India is considered by a number of workers to be the basement upon which the Dharwar supracrustal rocks were deposited. However, the Peninsular Gneiss in its present state is a composite gneiss formed by synkinematic migmatization during successive episodes of folding (DhF₁, DhF_1a and DhF₂) that affected the Dharwar supracrustal rocks. An even earlier phase of migmatization and deformation (DhF_*) is evident from relict fabrics in small enclaves of gneissic tonalites and amphibolites within the Peninsular Gneiss. We consider these enclaves to represent the original basement for the Dharwar supracrustal rocks. Tonalitic pebbles in conglomerates of the Dharwar Supergroup confirm the inference that the supracrustal rocks were deposited on a gneissic basement. Whole rock Rb-Sr ages of gneisses showing only the DhF₁ structures fall in the range of 3100–3200 Ma. Where the later deformation (DhF₂) has been associated with considerable recrystallization, the Rb-Sr ages are between 2500 Ma and 2700 Ma. Significantly, a new Rb-Sr analysis of tonalitic gneiss pebbles in the Kaldurga conglomerate of the Dharwar sequence is consistent with an age of ～2500 Ma and not that of 3300 Ma reported earlier by Venkatasubramanian and Narayanaswamy (1974). Pb-Pb ages based on direct evaporation of detrital zircon grains from the metasedimentary rocks of the Dharwar sequence fall into two groups, 3300–3100 Ma, and 2800–3000 Ma. Stratigraphic, structural, textural and geochronologic data, therefore, indicate that the Peninsular Gneiss of the Dharwar craton evolved over a protracted period of time ranging from > 3300 Ma to 2500 Ma.     

Pegmatite Emplacement in the Seridó Belt, Northeastern Brazil: Late Stage Kinematics of the Brasiliano Orogen

Geometric and kinematic analysis was performed in an area located in the central part of the Seridó Belt (NE Brazil), where supracrustal rocks affected by polyphase deformation are well exposed. The first event recognized in this area (and regionally known as the D₂ deformation) is characterized by top to the south thrust tectonics while a second one (D₃ deformation) is marked by upright folds, strike-slip or transpressive shear zones and the development of flower structures. Major pegmatite swarms were emplaced during and late as regards the second event (dated ca. 580 Ma), being part of the Brasiliano orogeny; similar dyke swarms are known from the Nigerian Shield. These pegmatite swarms provide reliable kinematic markers of the late evolutionary stage of the Neoproterozoic Trans-Sahara-Borborema collisional belt. Mineralogical, geometric and kinematic features support two stages of pegmatite emplacement during the strike-slip event: (i) older, syn-D₃ homogeneous pegmatites intruded mostly along lithological and structural discontinuities, such as foliation surfaces; (ii) late, D₃ heterogeneous pegmatites were emplaced along tension gashes and other dilation structures. The heterogeneous pegmatites are economically more important, being exploited for precious metals and stones, as well as industrial minerals.     

The tectono‐metamorphic evolution of the very low‐grade hangingwall constrains two‐stage gneiss dome formation in the Montagne Noire (Southern France)

The Montagne Noire in the southernmost French Massif Central is made of an ENE‐elongated gneiss dome flanked by Palaeozoic sedimentary rocks. The tectonic evolution of the gneiss dome has generated controversy for more than half a century. As a result, a multitude of models have been proposed that invoke various tectonic regimes and exhumation mechanisms. Most of these models are based on data from the gneiss dome itself. Here, new constraints on the dome evolution are provided based on a combination of very low‐grade petrology, K–Ar geochronology, field mapping and structural analysis of the Palaeozoic western Mont Peyroux and Faugères units, which constitute part of the southern hangingwall of the dome. It is shown that southward‐directed Variscan nappe‐thrusting (D₁) and a related medium‐P metamorphism (M₁) are only preserved in the area furthest away from the gneiss dome. The regionally dominant pervasive tectono‐metamorphic event D₂/M₂ largely transposes D₁ structures, comprises a higher metamorphic thermal gradient than M₁ (transition low‐P and medium‐P metamorphic facies series) and affected the rocks between c. 309 and 300 Ma, post‐dating D₁/M₁ by more than 20 Ma. D₂‐related fabrics are refolded by D₃, which in its turn, is followed by dextral‐normal shearing along the basal shear zone of both units at c. 297 Ma. In the western Mont Peyroux and Faugères units, D₂/M₂ is largely synchronous with shearing along the southern dome margin between c. 311 and 303 Ma, facilitating the emplacement of the gneiss dome into the upper crust. D₂/M₂ also overlaps in time with granitic magmatism and migmatization in the Zone Axiale between c. 314 and 306 Ma, and a related low‐P/high‐T metamorphism at c. 308 Ma. The shearing that accompanied the exhumation of the dome therefore was synchronous with a peak in temperature expressed by migmatization and intrusion of melts within the dome, and also with the peak of metamorphism in the hangingwall. Both, the intensity of D₂ fabrics and the M₂ metamorphic grade within the hangingwall, decrease away from the gneiss dome, with grades ranging from the anchizone–epizone boundary to the diagenetic zone. The related zonation of the pre‐D₃ metamorphic field gradients paralleled the dome. These observations indicate that D₂/M₂ is controlled by the exhumation of the Zone Axiale, and suggest a coherent kinematic between the different crustal levels at some time during D₂/M₂. Based on integration of these findings with regional geological constraints, a two‐stage exhumation of the gneiss dome is proposed: during a first stage between c. 316 and 300 Ma dome emplacement into the upper crust was controlled by dextral shear zones arranged in a pull‐apart‐like geometry. The second stage from 300 Ma onwards was characterized by northeast to northward extension, with exhumation accommodated by north‐dipping detachments and hangingwall basin formation along the northeastern dome margin.     

Mechanisms of thrust faulting in the gran sasso chain, central apennines, italy

The Gran Sasso chain in Central Italy is made up of an imbricate stack of eight thrust sheets, which were emplaced over the Upper Miocene—Lower Pliocene Laga Flysch. The thrust sheets are numbered from 1 to 8 in order of their decreasing elevation in the tectonic stack, and their basal thrusts are numbered from T₁ to T₈, accordingly. On the basis of their different deformation features, the major thrust faults fall into three groups: (1) thrust faults marked by thick belts of incoherent gouges and breccia zones (T₁, T₂, T₃); (2) thrust faults characterized by a sharp plane which truncates folds that had developed in the footwall rocks (T₅, T₆); and (3) thrust faults truncating folds developed in both the hangingwall and footwall units, and bordered by foliated fault rocks (T₇). The deformation features observed for the different faults seem to vary because of two combined factors: (1) lithologic changes in the footwall and hangingwall units separated by the thrust faults; and (2) increasing amounts of deformation in the deepest portions of the imbricate stack. The upper thrust sheets (from 1 to 6) are characterized by massive calcareous and dolomitic rocks, they maintain a homoclinal setting and are truncated up-section by the cataclastic thrust faults. The lowermost thrust sheets (7 and 8) are characterized by a multilayer with competence contrasts, which undergoes shear-induced folding prior to the final emplacement of the thrust sheets. Bedding and axial planes of folds rotate progressively towards the T₅, T₆, T₇ and T₈ thrust boundaries, and are subsequently truncated by propagation of the brittle thrust faults. The maximum deformation is observed along the T₇ thrust fault, consistent with horizontal displacement that increases progressively from the uppermost to the lowermost thrust sheet in the tectonic stack. The axial planes of the folds developed in the hangingwall and footwall units are parallel to the T₇ thrust fault, and foliated fault rocks have developed. Field data and petrographic analysis indicate that cleavage fabrics in the fault rocks form by a combination of cataclasis, cataclastic flow and pressure-solution slip, associated with pervasive shearing along subtly distributed slip zones parallel to the T₇ thrust fault. The development of such fabrics at upper crustal levels creates easy-slip conditions in progressively thinner domains, which are regions of localized flow during the thrust sheet emplacement.     

Structural characteristics of the rocks of the Delhi Supergroup with special reference to interference patterns: An appraisal with some examples from Central Rajasthan

The rocks of the Delhi Supergroup, which occur around Barr-Sendra and Phulad-Deogarh regions in Central Rajasthan, show three phases of deformational episodes: (i) phase D₁—tight-to-long limbed isoclinal fold (F₁); phase D₂—open, asymmetric fold (F ₂) controlling the map pattern of the formational boundaries; and (iii) phase D₃—major warps (F₃). Interference between nearly coaxial F₁ and F₂ on northerly axes produced hook-shaped and crescent patterns whereas superimposition of easterly trending F₃ on F₂ produced dome-and-basin patterns. The thermal peak was achieved during the second phase of deformation when the rocks were constructively metamorphozed and granites (850−750 m.y.), late synkinematic with respect to second phase of deformation, were emplaced. The sequence of deformation and the structural pattern of the rocks of the Delhi Supergroup in Central Rajasthan strikingly resemble those in northeastern Rajasthan. Structurally the characteristics of the Delhi Supergroup as verified in the entire region from NE to Central Rajasthan are: (a) the same sequence of development of folds, F₁, F₂ and F₃, interspersed with nearly identical phases of recrystallization, (b) hook-shaped interference pattern due to near-coaxial refolding of F₁ by F₂, and (c) variation in axial plunge of F₂ resulting in culminations and depressions. Lastly, phases of the recrystallization history indicates little time gap between F₁ and F₂, and a considerable gap between F₂ and F₃.     

三江北段东莫扎抓矿区构造变形特征

已有关于青藏高原隆升的各种构造模型多重视新生代变形而忽略了早期构造变形的限制.本文以三江北段东莫扎抓矿区为研究对象,通过详细的构造-岩相填图,恢复了矿区二叠纪以来变形序列,结合区域资料讨论了变形事件的大地构造背景.研究表明矿区发育中-下二叠统九十道班组灰岩、上二叠统那益雄组碎屑岩、上三叠统结扎群甲丕拉组碎屑岩和上三叠统结扎群波里拉组灰岩4套地层系统,二叠系与三叠系之间为不整合接触,局部被近南北向逆断层代替.北西向逆断层横亘矿区,断层上盘三叠纪碎屑岩和灰岩整体北倾,断层下盘三叠纪岩石被左右两条走滑断层夹持向南挤出.在图面和露头尺度上矿区叠加褶皱明显,南北向剖面上多见紧闭的倾伏褶皱,近东西向剖面上则为开阔水平的斜歪褶皱,表明南北向剖面上观察到的是已被叠加的早期褶皱,为矿区第一期变形,其形成与三叠纪末古特提斯洋盆闭合有关.始新世晚期印-亚大陆碰撞地壳缩短形成矿区第二期构造,即北西向逆断层和褶皱叠加.第三期近南北向逆断层可能形成于始新世末,与印-亚大陆碰撞引起的侧向旋转有关.     

A Duplex Model for the Eastern Cape Fold Belt? Evidence from the Palaeozoic Witteberg and Bokkeveld Groups (Cape Supergroup), Near Steytlerville, South Africa

The eastern part of the Cape Fold Belt, near Steytlerville, South Africa, reveals a typical pattern of numerous, north-verging thrust faults and associated folds, interpreted as part of a large duplex structure that formed along the southern margin of Gondwana during the Late Palaeozoic. Steeply-dipping fore- and backthrusts occur in the Bokkeveld Group (middle Cape Supergroup), where strata are composed of predominantly argillaceous rocks, whereas in the more arenaceous Witteberg Group (upper Cape Supergroup) there are fewer recognizable and less closely-spaced thrusts. Open style folds characterize areas in which the Bokkeveld Group crops out, but in areas of Witteberg outcrop, folds, especially those adjacent to thrusts, are often overturned.In spite of a general absence of marker horizons, a displacement of at least 500 metres can be inferred for one prominent thrust, the Jackalsbos thrust. This fault, the northernmost in the area investigated, is probably the sole thrust in the duplex structure, linked through southward-dipping imbricates to a projected roof thrust (the Baviaanskloof thrust) cropping out immediately south of the study area.Displacements on imbricates within the duplex are difficult if not impossible to measure, but the net effect is certainly accumulative and incremental. Truncation by a roof thrust and subsequent erosional processes may explain why so few of the many thrusts so far identified in the eastern part of the fold belt can be successfully mapped, and their displacements measured. Normal and strike-slip faults, less common than thrust faults, formed during extensional tectonism related to the breakup of Gondwana, during the Mesozoic.     

Timing and role of the Maranhão River Thrust in the evolution of the Neoproterozoic Brasília Belt and Tocantins Province, central Brazil

A low-angle thrust fault places high-PT granulites (hangingwall) of the Internal Zone of the Neoproterozoic Brasília Belt (Tocantins Province, central Brazil) in contact with a lower-grade footwall (External Zone) comprised of nappes of distal passive margin- and back-arc basin-related supracrustals. The footwall units were emplaced at  750 Ma onto proximal sedimentary rocks (Paranoá Group) of the São Francisco paleo-continent passive margin. The high-PT belt is comprised of 645–630 Ma granulite-facies paragneiss and orthogneiss, and mafic–ultramafic complexes that include three major layered intrusions and metavolcanic rocks granulitized at  750 Ma. These complexes occur within lower-grade metasedimentary rocks in the hangingwall of the Maranhão River Thrust, which forms the Internal Zone–External Zone boundary fault to the north of the Pirineus Zone of High Strain. Detailed lithostructural studies carried out in Maranhão River Thrust hangingwall and footwall metasedimentary rocks between the Niquelândia and Barro Alto complexes, and also to the east of these, indicate the same lithotypes and Sm–Nd isotopic signatures, and the same D₁–D₂ progressive deformation and greenschist-facies metamorphism. Additionally, footwall metasedimentary rocks exclusively display a post-D₂ deformation indicating that the Maranhão River Thrust propagated through upper crustal rocks of the Paranoá Group relatively late during the tectonic evolution of the belt. Fault propagation was a consequence of intraplate underthrusting during granulite exhumation. The results allow for a better tectonic understanding of the Brasília Belt and the Tocantins Province, as well as explaining the presence of the Pirineus Zone of High Strain.     

Thick‐skinned folding in the eastern Lachlan Fold Belt,Shoalhaven River Gorge,New South Wales

In the Shoalhaven River Gorge, in the eastern Lachlan Fold Belt, the Ordovician quartz‐turbidite succession (Adaminaby Group) is affected by one major phase of deformation with northerly trending, gently plunging, upright, close to tight folds (F₁) characterised by a range in half wavelengths up to 3 km. Several anticlinoria and synclinoria are developed and folds occur in at least four orders; these characteristics are consistent with buckling occurring at several scales and are controlled by the thickness of competent units in the multilayered succession. F₁ folding is thick‐skinned in style with the whole crust probably having been affected by deformation. D₁ occurred during the Silurian to Middle Devonian interval and was associated with crustal thickening and the shallowing of depositional environments over time. Locally, F₁ is overprinted by south‐southeast‐trending, steeply to moderately inclined F₂ that reorients F₁ to recumbent attitudes. D₂ is of Early to Middle Carboniferous age. Both deformations are related to convergence in an intra‐arc to backarc region and occurred inboard of a subduction zone, remnants of which occur in the New England Fold Belt.     

华南板块早中生代陆内造山过程——以雪峰山-九岭为例

雪峰山-九岭造山带位于华南板块的中心区域,是一条典型的陆内造山带。通过详细的野外地质观察,雪峰山在早中生代经历了3期构造变形:D1为上部指向NW的韧性剪切,D2代表了一期反向褶皱-逆冲构造事件,以及D3期的水平挤压形成的直立的褶皱、劈理和线理。而在九岭,早中生代大规模脆-韧性域构造变形叠加在早古生代韧性变形之上,形成了一系列极性NW逆冲断层和不对称褶皱。雪峰山-九岭陆内造山带形成于早中生代,造山作用可以分为两个阶段,即245~225Ma的挤压变形阶段和225~215Ma的垮塌-岩浆侵位阶段。雪峰山-九岭造山带的构造特点表明,华南板块东南缘古太平洋板块向北西方向的俯冲可能引发了早中生代的陆内造山过程。     

Contrasting pressure–temperature–deformation history across a vestigial craton–mobile belt boundary: the western margin of the Eastern Ghats Belt at Deobhog, India

At Deobhog, migmatitic gneisses and granulites of the Eastern Ghats Belt are juxtaposed against a cratonic ensemble of banded augen gneiss, amphibolite and calcsilicate gneiss, intruded by late hornblende granite and dolerite. In the migmatitic gneiss unit, early isoclinal folds (syn‐D_1M and D_2M) are reoriented along N–S‐trending and E‐dipping shear planes (S_3M), with (S_1M–S_3M) intersection lineations having steep to moderate plunges. The near‐peak P–T condition was syn‐D_3M (≥900 °C, 9.5 kbar), as inferred from syn‐D_3M Grt+Opx‐bearing leucosomes in mafic granulites, and from thermobarometry on Grt (corona)–Opx/Cpx–Pl–Qtz assemblages. The P–T values are consistent with the occurrence of Opx–Spr–Crd assemblages in spatially associated high‐Mg–Al pelites. A subsequent period of cooling followed by isothermal decompression (800–850 °C, c. 7 kbar) is documented by the formation of coronal garnet and its decomposition to Opx+Pl symplectites in mafic granulites. Hydrous fluid infiltration accompanying the retrograde changes is manifested in biotite replacing Opx in some lithologies. The cratonic banded gneiss–granite unit also documents two phases of isoclinal folding (D_1B & D_2B), with the L_2B lineation girdle different from the lineation spread in the migmatitic gneiss unit. Calcsilicate gneiss (Hbl–Pl–Cpx–Scap–Cal) and amphibolite (Hbl–Pl±Grt±Cpx) within banded gneisses record syn‐D_2B peak metamorphic conditions (c. 700 °C, 6.5 kbar), followed by cooling (to c. 500 °C) manifested in the stabilization of coronal clinozoisite–epidote. The D_3B shear deformation post‐dates granite and dolerite intrusions and is characterized by top‐to‐the‐west movement along N–S‐trending, E‐dipping shear planes. Deformation mechanisms of quartz and feldspar in granites and banded gneisses and amphibole–plagioclase thermometry within shear bands in dolerites document an inverted syn‐D_3B thermal gradient with temperature increasing from 350 to 550 °C in the west to ≥700 °C near the contact with the migmatitic gneiss unit. The thermal gradient is reflected in the stabilization of chlorite after hornblende in S_3B shears to the west, and post‐D_2B neosome segregation along D_3B folds and shears to the east. The contrasting lithologies, early structures and peak metamorphic conditions in the two units indicate unconnected pre‐D₃P–T –deformation histories. The shared D₃ deformation in the two units, the syn‐D₃ inverted thermal gradient preserved in the footwall cratonic rocks and the complementary cooling and hydration of the hanging wall granulites across the contact are attributed to westward thrusting of ‘hot’ Eastern Ghats granulites on ‘cool’ cratonic crust. It is suggested that the Eastern Ghats migmatitic gneiss unit is not a reworked part of the craton, but a para‐autochthonous/allochthonous unit emplaced on and amalgamated to the craton.     

Structural analysis and implicit 3D modelling of high-grade host rocks to the Venetia kimberlite diatremes,Central Zone,Limpopo Belt,South Africa

The Beit Bridge Complex of the Central Zone (CZ) of the Limpopo Belt hosts the 519 ± 6 Ma Venetia kimberlite diatremes. Deformed shelf- or platform-type supracrustal sequences include the Mount Dowe, Malala Drift and Gumbu Groups, comprising quartzofeldspathic units, biotite-bearing gneiss, quartzite, metapelite, metacalcsilicate and ortho- and para-amphibolite. Previous studies define tectonometamorphic events at 3.3–3.1 Ga, 2.7–2.5 Ga and 2.04 Ga. Detailed structural mapping over 10 years highlights four deformation events at Venetia. Rules-based implicit 3D modelling in Leapfrog Geo™ provides an unprecedented insight into CZ ductile deformation and sheath folding. D₁ juxtaposed gneisses against metasediments. D₂ produced a pervasive axial planar foliation (S₂) to isoclinal F₂ folds. Sheared lithological contacts and S₂ were refolded into regional, open, predominantly southward-verging, E–W trending F₃ folds. Intrusion of a hornblendite protolith occurred at high angles to incipient S₂. Constrictional-prolate D₄ shows moderately NE-plunging azimuths defined by elongated hornblendite lenses, andalusite crystals in metapelite, crenulations in fuchsitic quartzite and sheath folding. D₄ overlaps with a: 1) 2.03–2.01 Ga regional M₃ metamorphic overprint; b) transpressional deformation at 2.2–1.9 Ga and c) 2.03 Ga transpressional, dextral shearing and thrusting around the CZ and d) formation of the Avoca, Bellavue and Baklykraal sheath folds and parallel lineations.     

Structural and geochronological constraints on the tectonic evolution of the Dulong-Song Chay tectonic dome in Yunnan province, SW China

The Dulong-Song Chay tectonic dome lies on the border of China (SE Yunnan Province) and northern Vietnam, and consists of two tectonic and lithologic units: a core complex and a cover sequence, separated by an extensional detachment fault. These two units are overlain unconformably by Late Triassic strata. The core complex is composed of gneiss, schist and amphibolite. SHRIMP zircon U–Pb dating results for the orthogneiss yield an age of 799±10 Ma, which is considered to be the crystallization age of its igneous protolith formed in an arc-related environment. A granitic intrusion within the core complex occurred with an age of 436–402 Ma, which probably formed during partial closure of Paleotethys. Within the core complex, metamorphic grades change sharply from upper greenschist-low amphibolite facies in the core to low greenschist facies in the cover sequence. There are two arrays of foliation within the core complex, detachment fault and the cover sequence: S₁ and S₂. The pervasive S₁ is the axial plane of intrafolial S₀ folds. D₁ deformation related to this foliation is characterized by extensional structures. The strata were structurally thinned or selectively removed along the detachment faults, indicating exhumation of the Dulong-Song Chay tectonic dome. The major extension occurred at 237 Ma, determined by SHRIMP zircon U–Pb and ³⁹Ar/⁴⁰Ar isotopic dating techniques. Regionally, simultaneous tectonic extension was associated with pre-Indosinian collision between the South China and Indochina Blocks. The S₂ foliation appears as the axial plane of NW-striking S₁ buckling folds formed during a compressional regime of D₂. D₂ is associated with collision between the South China and Indochina Blocks along the Jinshajiang-Ailao Shan suture zone, and represents the Indosinian deformation. The Dulong granites intruded the Dulong-Song Chay dome at 144±2, 140±2 and 116±10 Ma based on ³⁹Ar/⁴⁰Ar measurement on muscovite and biotite. The dome was later overprinted by a conjugate strike-slip fault and related thrust fault, which formed a vortex structure, contemporaneously with late Cenozoic sinistral movement on the Ailao Shan-Red River fault.     

Structural geometry of the early Precambrian terrane south of Coimbatore in the “Palghat Gap”, southern India

The ENE-plunging macroscopic folds, traced by calc gneiss interbanded with marble and sillimanite schist within the Peninsular Gneiss around Suganapuram in the ‘Palghat gap’ in southern India, represent structures of the second generation (D₂). They have folded the axial planes of a set of D₁ isoclinal folds on stratification coaxially, so that the mesoscopic D₁ folds range from reclined in the hinge zones, through inclined to upright in the limb zones of the D₂ folds. Orthogonal relation between stratification and axial planar cleavage, and ‘M’ shaped folds on layering locate the hinge zones of the D₁ folds, whereas folds on axial planar cleavage with ‘M’ shaped folds are the sites of the D₂ fold hinges. Extreme variation in the shapes of the isoclinal D₁ folds from class 1B through class 1C to nearly class 2 of Ramsay is a consequence of buckling followed by flattening on layers of widely varying viscosity contrast. The large ENE-trending structures in this supracrustal belt within the Peninsular Gneiss in the ‘Palghat gap’ could not have evolved by reorientation of NS-trending structures of the Dharwar tectonic province to the north by movement along the Moyar-Bhavani shear zone which marks the boundary between the two provinces. This is because the Moyar and Bhavani faults are steep dipping reverse faults with dominant dip-slip component. Deceased     

Early Palaeozoic subduction in the southeastern Lachlan Fold Belt,Batemans Bay,New South Wales

The southeastern Lachlan Fold Belt at Batemans Bay on the New South Wales south coast is an accretionary complex with a prolonged deformation history. Early features include synsedimentary folds, mélange, disaggregated bedding and faults. Fabrics within the clast-in-matrix mélange and mudstone match those found in cores from the lower slopes of modern accretionary prisms. At the toe of the accretionary prism, the contact between the craton-derived Adaminaby Group and ocean floor deposits of the Wagonga Group is conformable. As subduction continued, the early structures were overprinted by (D₁) deformation that produced meridional north – south-trending, tight to isoclinal folds (F₁) and associated axial-plane cleavage (S₁). This west-dipping subduction occurred in the Late Ordovician/Early Silurian but probably began much earlier. A younger regional deformation (D₂) resulted in north – south-trending, open to tight folds (F₂), slightly oblique to F₁, and an axial-surface cleavage (S₂).     

U–Pb SHRIMP zircon geochronology and T–t–d history of the Kampa Dome, southern Tibet

Structural, petrographic and geochronologic studies of the Kampa Dome provide insights into the tectonothermal evolution of orogenic crust exposed in the North Himalayan gneiss domes of southern Tibet. U–Pb ion microprobe dating of zircons from granite gneiss exposed at the deepest levels within the dome yields concordia ²⁰⁶Pb/²³⁸U age populations of 506 ± 3 Ma and 527 ± 6 Ma, with no evidence of new zircon growth during Himalayan orogenesis. However, the granite contains penetrative deformation fabrics that are also preserved in the overlying Paleozoic strata, implying that the Kampa granite is a Cambrian pluton that was strongly deformed and metamorphosed during Himalayan orogenesis. Zircons from deformed leucogranite sills that cross-cut Paleozoic metasedimentary rocks yield concordant Cambrian ages from oscillatory zoned cores and discordant ages ranging from ca. 491–32 Ma in metamict grains. Since these leucogranites clearly post-date the metasedimentary rocks they intrude, the zircons are interpreted as xenocrysts that are probably derived from the Kampa granite. The Kampa Dome formed via a series of progressive orogenic events including regional ~ N–S contraction and related crustal thickening (D₁), predominately top-to-N ductile shearing and crustal extension (D₂), top-to-N brittle–ductile faulting and related folding on the north limb of the dome, localized top-to-S faulting on the southern limb of the dome, and crustal doming (D₃), and continued N–S contraction, E–W extension and doming (D₄). Structural and geochronologic variability amongst adjacent North Himalayan gneiss domes may reflect changes in the magnitude of crustal exhumation along the North Himalayan antiform, possibly relating to differences in the mid-crustal geometry of the exhuming fault systems.