Turbulence in the presence of internal waves in the bottom boundary layer of the California inner shelf

Turbulence measurements were collected in the bottom boundary layer of the California inner shelf near Point Sal, CA, for 2 months during summer 2015. The water column at Point Sal is stratified by temperature, and internal bores propagate through the region regularly. We collected velocity, temperature, and turbulence data on the inner shelf at a 30-m deep site. We estimated the turbulent shear production (P), turbulent dissipation rate (ε), and vertical diffusive transport (T), to investigate the near-bed local turbulent kinetic energy (TKE) budget. We observed that the local TKE budget showed an approximate balance (P?≈?ε) during the observational period, and that buoyancy generally did not affect the TKE balance. On a finer resolution timescale, we explored the balance between dissipation and models for production and observed that internal waves did not affect the balance in TKE at this depth.     

Turbulence and mixing in a freshwater-influenced tidal bay: Observations and numerical modeling

In situ observations and numerical simulations of turbulence are essential to understanding vertical mixing processes and their dynamical controls on both physical and biogeochemical processes in coastal embayments. Using in situ data collected by bottom-mounted acoustic Doppler current profilers(ADCPs) and a free-falling microstructure profiler, as well as numerical simulations with a second-moment turbulence closure model, we studied turbulence and mixing in the Xiamen Bay, a freshwater-influenced tidal bay located at the west coast of the Taiwan Strait. Dynamically, the bay is driven predominantly by the M2 tide, and it is under a significant influence of the freshwater discharged from the Jiulong River. It is found that turbulence quantities such as the production and dissipation rates of the turbulent kinetic energy(TKE) were all subject to significant tidal variations, with a pronounced ebb-flood asymmetry. Turbulence was stronger during flood than ebb. During the flooding period, the whole water column was nearly well mixed with the depth-averaged TKE production rate and vertical eddy viscosity being up to 5?10?6 W kg?1 and 2?10?2 m2 s?1, respectively. In contrast, during the ebb strong turbulence was confined only to a 5?8 m thick bottom boundary layer, where turbulence intensity generally decreases with distance from the seafloor. Diagnosis of the potential energy anomaly showed that the ebb-flood asymmetry in turbulent dissipation and mixing was due mainly to tidal straining process as a result of the interaction between vertically shared tidal currents and horizontal density gradients. The role of vertical mixing in generating the asymmetry was secondary. A direct comparison of the modeled and observed turbulence quantities confirmed the applicability of the second-moment turbulence closure scheme in modeling turbulent processes in this weakly stratified tidally energetic environment, but also pointed out the necessity of further refinements of the model.     

Effect of non‐uniformity of flow on velocity and turbulence intensities over a cobble‐bed

Non‐uniform flows encompassing both accelerating and decelerating flows over a cobble‐bed flume have been experimentally investigated in a flume at a scale of intermediate relative submergence. Measurements of mean longitudinal flow velocity u, and determinations of turbulence intensities u′, v′, w′, and Reynolds shear stress ?u_fw_f have been made. The longitudinal velocity distribution was divided into the inner zone close to the bed and the outer zone far from the bed. In the inner zone of the boundary layer (near the bed) the velocity profile closely followed the ‘Log Law’; however, in the outer zone the velocity distribution deviated from the Log Law consistently for both accelerating and decelerating flows and the changes in bed slopes ranging from ?2% to + 2% had no considerable effect on the outer zone. For a constant bed slope (S = ±0·015), the larger the flow rate, the smaller the turbulence intensities. However, no detectable pattern has been observed for u′, v′ and w′ distributions near the bed. Likewise, for a constant flow rate (Q = 0·040 m³/s), with variation in bed slope the longitudinal turbulent intensity profile in the longitudinal direction remained concave for both accelerating and decelerating flows; whereas vertical turbulent intensity (w′) profile presented no specific form. The results reveal that the positions of maximum values of turbulence intensities and the Reynolds shear stress depend not only on the flow structure (accelerating or decelerating) but also on the intermediate relative submergence scale. Copyright © 2009 John Wiley & Sons, Ltd.     

Variations in turbulent kinetic energy at a point source submarine groundwater discharge in a reef lagoon

The influence of sea level variations due to tides and wave setup on turbulent kinetic energy (TKE) was observed at a point source submarine groundwater discharge in a fringing coral reef lagoon. Tidal and wave setup variations modulated speed, TKE, TKE dissipation, and water temperature and salinity at the buoyant jet. The primary driver of jet TKE and speed variations was tides, while wave setup was a minor contributor. An inverse relationship between surface elevation and TKE was explained with an exponential equation based on sea level variations. During low tides, peak jet speeds (up to 0.3 m s^?1) and TKE per unit mass (up to 0.4 m² s^?2) were observed. As high tide approached, the jet produced minimum TKE of ~0.003 m² s^?2 and TKE dissipation ranged from 2 to 8×10^?4 m² s^?3. This demonstrated the sensitivity of the jet discharge to tides despite the small tidal range (<20 cm). Jet temperatures and salinities displayed semidiurnal oscillations with minimum salinity and temperature values during maximum discharge. Jet salinities increased throughout low tides while temperatures decreased. This pattern suggested the jet conduit was connected to a stratified cavity within the aquifer containing cool fresh water over cool salty water. As low tides progressed, jet outflow increased in salinity because of the mixing within the conduit, while lower jet temperatures suggested water coming from further or deeper in the aquifer. The presence of such a cavity has been recently confirmed by divers.     

Stable-boundary-layer regimes from the perspective of the low-level jet

This paper reviews results from two field studies of the nocturnal stable atmospheric boundary layer (SBL) over the Great Plains of the United States. Data from a scanning remote-sensing system, a High-Resolution Doppler Lidar (HRDL), provided measurements of mean and turbulent wind components at high spatial and temporal resolution through the lowest 500–1000 m of the atmosphere. This data set has allowed the characteristics of the low-level jet (LLJ) maximum (speed, height, direction) to be documented through entire nights. LLJs form after sunset and produce strong shear in the layer below the LLJ maximum or nose, which is a source of turbulence and mixing in the SBL. Simultaneous HRDL measurements of turbulence quantities related to turbulence kinetic energy (TKE) has allowed the turbulence in the subjet layer to be related to LLJ properties. Turbulence structure was found to be a function of the bulk stability of the subjet layer. For the strong-LLJ (> 15 m s⁻¹), weakly stable cases the strength of the turbulence is proportional to the strength of the LLJ. For these cases with nearly continuous turbulence in the subjet layer, low-level jet scaling, in which lengths are scaled by the LLJ height and velocity variables are scaled by the LLJ speed, was found to be appropriate. For the weak-wind (< 5 m s⁻¹ in the lowest 200 m), very stable boundary layer (vSBL), the boundary layer was found to be very shallow (sometimes < 10 m deep), and turbulent fluxes between the earth’s surface and the atmosphere were found to be essentially shut down. For more intermediate wind speeds and stabilities, the SBL shows varying degrees of intermittency due to various mechanisms, including shearinstability and other gravity waves, density currents, and other mesoscale disturbances.     

The net flux of inorganic matter by an intertidal oyster reef

Inorganic particulate material uptake and release over an oyster reef during a tidal cycle was measured every 11.8 days for one year. There was a net uptake on the flooding tides and a net release on ebbing tides. Particulate uptake was highest in late summer reaching a maximum of 230 g m⁻² h⁻¹. Particulate release was also highest in late summer reaching a maximum of 94 g m⁻² h⁻¹. On an annual basis, 86.7 kg m⁻² y⁻¹ of inorganic particulate material was taken up on flooding tides and 56.5 kg m⁻² y⁻¹ was released on ebbing tides. The pattern of uptake on flooding tides and release on ebbing tides was hypothesized to be the result of higher water velocities on ebbing tides.     

A note on Stokes production of turbulence kinetic energy in the oceanic mixed layer: observations in the Baltic Sea

Shear- and convection-driven turbulence coexists with wind-generated surface gravity waves in the upper ocean. The turbulent Reynolds stresses in the oceanic mixed layer can therefore interact with the shear of the wave-generated Stokes drift velocity to extract energy from the surface waves and inject it into turbulence, thus augmenting the mean shear-driven turbulence. Stokes production of turbulence kinetic energy (TKE) is difficult to measure in the field, since it requires simultaneous measurement of the turbulent stress and the Stokes drift profiles in the water column. However, it is readily inferred using second moment closure models of the oceanic mixed layer provided: (1) wave properties are available, along with the usual water mass properties, and radiative and air–sea fluxes needed to drive the mixed layer model and (2) the model skill can be assessed by comparing the model results against the observed dissipation rates of TKE. Comprehensive measurements made during the Reynolds 2002 campaign in the Baltic Sea have made the estimation of Stokes production possible, and in this paper, we report on the effort and the conclusions reached. Measurements of air–sea exchange parameters and water mass properties during the campaign allowed a mixed layer model to be run and the turbulent stress in the water column to be inferred. Simultaneous wave spectrum measurements enabled Stokes drift profile to be deduced and wave breaking to be included in the model run, and the Stokes production of TKE in the water column estimated. Direct measurements of the TKE dissipation rate from an upward traversing microstructure profiler were used to assure that the model could reproduce the turbulent dissipation rate in the water column. The model results indicate that the Stokes production of TKE in the mixed layer is of the same order of magnitude as the shear production and must therefore be included in mixed layer models.     

Shear velocity estimates in rough‐bed open‐channel flow

Shear velocity u_* is an important parameter in geophysical flows, in particular with respect to sediment transport dynamics. In this study, we investigate the feasibility of applying five standard methods [the logarithmic mean velocity profile, the Reynolds stress profile, the turbulent kinetic energy (TKE) profile, the wall similarity and spectral methods] that were initially developed to estimate shear velocity in smooth bed flow to turbulent flow over a loose bed of coarse gravel (D₅₀ = 1·5 cm) under sub‐threshold conditions. The analysis is based on quasi‐instantaneous three‐dimensional (3D) full depth velocity profiles with high spatial and temporal resolution that were measured with an Acoustic Doppler Velocity Profiler (ADVP) in an open channel. The results of the analysis confirm the importance of detailed velocity profile measurements for the determination of shear velocity in rough‐bed flows. Results from all methods fall into a range of ± 20% variability and no systematic trend between methods was observed. Local and temporal variation in the loose bed roughness may contribute to the variability of the logarithmic profile method results. Estimates obtained from the TKE and Reynolds stress methods reasonably agree. Most results from the wall similarity method are within 10% of those obtained by the TKE and Reynolds stress methods. The spectral method was difficult to use since the spectral energy of the vertical velocity component strongly increased with distance from the bed in the inner layer. This made the choice of the reference level problematic. Mean shear stress for all experiments follows a quadratic relationship with the mean velocity in the flow. The wall similarity method appears to be a promising tool for estimating shear velocity under rough‐bed flow conditions and in field studies where other methods may be difficult to apply. This method allows for the determination of u_* from a single point measurement at one level in the intermediate range (0·3 < h < 0·6). Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of shear in the convective boundary layer: analysis of the turbulent kinetic energy budget

Effects of convective and mechanical turbulence at the entrainment zone are studied through the use of systematic Large-Eddy Simulation (LES) experiments. Five LES experiments with different shear characteristics in the quasi-steady barotropic boundary layer were conducted by increasing the value of the constant geostrophic wind by 5 m s^-1 until the geostrophic wind was equal to 20 m s^-1. The main result of this sensitivity analysis is that the convective boundary layer deepens with increasing wind speed due to the enhancement of the entrainment heat flux by the presence of shear. Regarding the evolution of the turbulence kinetic energy (TKE) budget for the studied cases, the following conclusions are drawn: (i) dissipation increases with shear, (ii) the transport and pressure terms decrease with increasing shear and can become a destruction term at the entrainment zone, and (iii) the time tendency of TKE remains small in all analyzed cases. Convective and local scaling arguments are applied to parameterize the TKE budget terms. Depending on the physical properties of each TKE budget contribution, two types of scaling parameters have been identified. For the processes influenced by mixed-layer properties, boundary layer depth and convective velocity have been used as scaling variables. On the contrary, if the physical processes are restricted to the entrainment zone, the inversion layer depth, the modulus of the horizontal velocity jump and the momentum fluxes at the inversion appear to be the natural choices for scaling these processes. A good fit of the TKE budget terms is obtained with the scaling, especially for shear contribution.     

Comparing different methods of bed shear stress estimates in simple and complex flow fields

Bed shear stress is a fundamental variable in river studies to link ?ow conditions to sediment transport. It is, however, dif?cult to estimate this variable accurately, particularly in complex ?ow ?elds. This study compares shear stress estimated from the log pro?le, drag, Reynolds and turbulent kinetic energy (TKE) approaches in a laboratory ?ume in a simple boundary layer, over plexiglas and over sand, and in a complex ?ow ?eld around de?ectors. Results show that in a simple boundary layer, the log pro?le estimate is always the highest. Over plexiglas, the TKE estimate was the second largest with a value 30 per cent less than the log estimate. However, over sand, the TKE estimate did not show the expected increase in shear stress. In a simple boundary layer, the Reynolds shear stress seems the most appropriate method, particularly the extrapolated value at the bed obtained from a turbulent pro?le. In a complex ?ow ?eld around de?ectors, the TKE method provided the best estimate of shear stress as it is not affected by local streamline variations and it takes into account the increased streamwise turbulent ?uctuations close to the de?ectors. It is suggested that when single‐point measurements are used to estimate shear stress, the instrument should be positioned close to 0·1 of the ?ow depth, which corresponds to the peak value height in pro?les of Reynolds and TKE shear stress. Copyright © 2004 John Wiley & Sons, Ltd.     

The influence of riparian vegetation on near‐bank turbulence: a flume experiment

Measurements from a fixed‐bed, Froude‐scaled hydraulic model of a stream in northeastern Vermont demonstrate the importance of forested riparian vegetation effects on near‐bank turbulence during overbank flows. Sections of the prototype stream, a tributary to Sleepers River, have increased in channel width within the last 40 years in response to passive reforestation of its riparian zone. Previous research found that reaches of small streams with forested riparian zones are commonly wider than adjacent reaches with non‐forested, or grassy, vegetation; however, driving mechanisms for this morphologic difference are not fully explained. Flume experiments were performed with a 1:5 scale, simplified model of half a channel and its floodplain, mimicking the typical non‐forested channel size. Two types of riparian vegetation were placed on the constructed floodplain: non‐forested, with synthetic grass carpeting; and forested, where rigid, randomly distributed, wooden dowels were added. Three‐dimensional velocities were measured with an acoustic Doppler velocimeter at 41 locations within the channel and floodplain at near‐bed and 0·6‐depth elevations. Observations of velocity components and calculations of turbulent kinetic energy (TKE), Reynolds shear stress and boundary shear stress showed significant differences between forested and non‐forested runs. Generally, forested runs exhibited a narrow band of high turbulence between the floodplain and main channel, where TKE was roughly two times greater than TKE in non‐forested runs. Compared to non‐forested runs, the hydraulic characteristics of forested runs appear to create an environment with higher erosion potential. Given that sediment entrainment and transport can be amplified in flows with high turbulence intensity and given that mature forested stream reaches are wider than comparable non‐forested reaches, our results demonstrated a possible driving mechanism for channel widening during overbank flow events in stream reaches with recently reforested riparian zones. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental investigation of the impacts of coherent flow structures upon turbulence properties in regions of crescentic scour

This study examines the spatial distributions of third‐order moments of velocity fluctuations, the turbulent kinetic energy (TKE) fluxes, and the conditional statistics of Reynolds shear stress across the equilibrium crescentic scour structures generated upstream of short horizontal static cylinders. Detailed velocity data were collected using three‐dimensional (3D) micro‐acoustic Doppler velocimeter (ADV) across and within the equilibrium scour marks. The analysis reveals that the positive and negative values of third‐order moments associated with the level bed surface and the scour holes are directly related to coherent structures. The components of TKE flux are discussed for the near‐bed region of the level bed surface and scour holes in relation to sweep–ejection events. A cumulant‐discard method is applied to the Gram‐Charlier probability distribution of two variables to describe the statistical properties of the term u′w′. The conditional statistics of the Reynolds shear stress show a good agreement with the experimental data. The distribution of the joint probability density function in the near‐bed region changes cyclically along the scour hole depending on the bottom fluid velocity, which implies a change from upward to downward flux of momentum and vice versa. Both the ejection and sweep events at near‐bed points on the level surface are more important than within the scour region; and in contrast, both events are stronger for the scour marks than the level bed surface at the outer layer. Sweeps dominate over ejections for the scour hole induced by smaller diameter and ejections dominate for larger diameter. Copyright © 2013 John Wiley & Sons, Ltd.     

Early spring turbulent mixing in an ice-covered Arctic fjord during transition to melting

Observations are presented of currents, hydrography and turbulence in a jet-type tidally forced fjord in Svalbard. The fjord was ice covered at the time of the experiment in early spring 2004. Turbulence measurements were conducted by both moored instruments within the uppermost 5 m below the ice and a microstructure profiler covering 3–60 m at 75 m depth. Tidal choking at the mouth of the fjord induces a tidal jet advecting relatively warmer water past the measurement site and dominating the variability in hydrography. While there was no strong correlation with the observed hydrography or mixing and the phase of the semidiurnal tidal cycle, the mean structure in dissipation of turbulent kinetic energy, work done under the ice and the mixing in the water column correlated with the current when conditionally sampled for tidal jet events. Observed levels of dissipation of turbulent kinetic energy per unit mass, 1.1×10⁻⁷ W kg⁻¹, and eddy diffusivity, 7.3×10⁻⁴ m² s⁻¹, were comparable to direct measurements at other coastal sites and shelves with rough topography and strong forcing. During spring tides, an average upward heat flux of 5 W m⁻² in the under-ice boundary layer was observed. Instantaneous (1 h averaged) large heat flux events were correlated with periods of large inflow, hence elevated heat fluxes were associated with the tidal jet and its heat content. Vertical heat fluxes are derived from shear-probe measurements by employing a novel model for eddy diffusivity [Shih et al., 2005. Parameterization of turbulent fluxes and scales using homogeneous sheared stably stratified turbulence simulations. Journal of Fluid Mechanics 525, 193–214]. When compared to the direct heat flux measurements using the eddy correlation method at 5 m below the ice, the upper 4–6 m averaged heat flux estimates from the microstructure profiler agreed with the direct measurements to within 10%. During the experiment water column was stably, but weakly, stratified. Destabilizing buoyancy fluxes recorded close to the ice were absent at 5 m below the ice, and overall, turbulence production was dominated by shear. A scaling for dissipation employing production by both stress and buoyancy [Lombardo and Gregg, 1989. Similarity scaling of viscous and thermal dissipation in a convecting boundary layer. Journal of Geophysical Research 94, 6273–6284] was found to be appropriate for the under-ice boundary layer.     

Turbulence measurements in a submarine canyon

Profiles of velocity turbulence in Monterey Canyon, made with a recently developed expendable probe, show the existence of a very turbulent bottom boundary layer. The turbulent flow is up to 170 m thick and has peak microscale shears of 1 m s⁻¹ per meter. The rate of dissipation of kinetic energy, based on the observed shear variance, averaged over the depth of the turbulent boundary layer ranged from 70 to 500 × 10⁻⁶W m⁻³. Temperature measurements indicate that the flow was up canyon at a time of low tide. The upper bound for the vertical eddy viscosity is estimated to be17 × 10⁻⁴m²s⁻¹ and for the vertical eddy diffusivity is estimated to be 15 × 10⁻⁴m²s⁻¹. The large vertical scale and the intensity of the observed boundary layer suggest that the flow in Monterey Canyon may be important for the renewal and circulation of water over the continental shelf in the bay area.     

Determination of critical shear stress of non‐cohesive soils using submerged jet test and turbulent kinetic energy

Laboratory tests using Jet Erosion Testing (JET) apparatus, impinging normally on a horizontal boundary, were conducted to determine the critical shear stress (τ_c) of non‐cohesive soil samples. A three‐dimensional (3D) SonTek/YSI 16 MHz Micro‐Acoustic Doppler Velocimeter (MicroADV) was used to measure turbulent kinetic energy (TKE) at a radial limit of entrainment in the wall jet zone and the measurements were used to calculate τ_c of the samples. The results showed that TKE increases exponentially with increasing particle size. The τ_c from this study were comparable (R² = 0.8) to the theoretical τ_c from Shields diagram after bed roughness scale ratio (D/k_s), due to the non‐uniform bed conditions, was accounted for. This study demonstrated that JET and TKE can be used to determine τ_c of non‐cohesive soils. The use of JET and TKE was found to be faster and easier when compared to the conventional approach of using flumes. A relationship of TKE at the onset of incipient motion (TKE_c) and samples’ D₅₀ developed in this study can be used to predict τ_c of non‐cohesive soils under similar non‐uniform conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Spatial variability of three‐dimensional Reynolds stresses in a developing channel bend

Experimental results of the mean flow field and turbulence characteristics for flow in a model channel bend with a mobile sand bed are presented. Acoustic Doppler velocimeters (ADVs) were used to measure the three components of instantaneous velocities at multiple cross sections in a 135° channel bend for two separate experiments at different stages of clear water scour conditions. With measurements at multiple cross sections through the bend it was possible to map the changes in both the spatial distribution of the mean velocity field and the three Reynolds shear stresses. Turbulent stresses are known to contribute to sediment transport and the three‐dimensionality inherent to flow in open channel bends presents a useful case for determining specific relations between three‐dimensional turbulence and sediment entrainment and transport. These measurements will also provide the necessary data for validating numerical simulations of turbulent flow and sediment transport. The results show that the magnitude and distribution of three‐dimensional Reynolds stresses increase through the bend, with streamwise‐cross stream and cross stream‐vertical components exceeding the maximum principal Reynolds stress through the bend. The most intriguing observation is that near‐bed maximum positive streamwise‐cross stream Reynolds stress coincides with the leading edge of the outer bank scour hole (or thalweg), while maximum cross stream‐vertical Reynolds stress (in combination with high negative streamwise‐cross stream Reynolds stress near the bend apex) coincides with the leading edge of the inner bank bar. Maximum Reynolds stress and average turbulent kinetic energy appear to be greater and more localized over the scour hole before final equilibrium scour is reached. This suggests that the turbulent energy in the flow is higher while the channel bed is developing, and both lower turbulent energy and a broader distribution of turbulent stresses near the bed are required for cessation of particle mobilization and transport. Copyright © 2010 John Wiley & Sons, Ltd.     

An experimental study on the ripple–dune transition

Flume experiments were conducted on different bed stages across the ripple–dune transition. As flow velocity increases, an initially flat bed surface (made of fairly uniform sandy material) is gradually transformed into a two‐dimensional rippled bed. With further increase in velocity, two‐dimensional ripples are replaced by irregular, linguoid ripples. As the average velocity necessary for the ripple–dune transition to occur is imposed on the bed surface, these non‐equilibrium linguoid ripples are further transformed into larger, two‐dimensional dunes. For each of these stages across the transition, a concrete mould of the bed was created and the flow structure above each fixed bed surface investigated. An acoustic Doppler velocimeter was used to study the flow characteristics above each bed surface. Detailed profiles were used along a transect located in the middle of the channel. Results are presented in the form of spatially averaged profiles of various flow characteristics and of contour maps of flow fields (section view). They clearly illustrate some important distinctions in the flow structure above the different bedform types associated with different stages during the transition. Turbulence intensity and Reynolds stresses gradually increase throughout the transition. Two‐dimensional ripples present a fairly uniform spatial distribution of turbulent flow characteristics above the bed. Linguoid ripples induce three‐dimensional turbulence structure at greater heights above the bed surface and turbulence intensity tends to increase steadily with height above bed surface in the wake region. A very significant increase in turbulence intensity and momentum exchange occurs during the transition from linguoid ripples to dunes. The turbulent flow field properties above dunes are highly dependent on the position along and above the bed surface and these fields present a very high degree of spatial variability (when compared with the rippled beds). Further investigations under natural conditions emphasizing sediment transport mechanisms and rates during the transition should represent the next step of analysis, together with an emphasis on quadrant analysis. Copyright © 2001 John Wiley & Sons, Ltd.     

USING SPECTRAL ANALYSIS TO DETECT SENSOR NOISE AND CORRECT TURBULENCE INTENSITY AND SHEAR STRESS ESTIMATES FROM EMCM FLOW RECORDS

Electromagnetic current meters (EMCMs) are frequently used to gather turbulent velocity records in rivers and estuaries. Experience has shown that, on occasion, the output of these sensors can be affected by contamination from various noise sources. These noises may be limited to narrow bands of frequencies and thus fail to produce conspicuous increases in observed signal variance. Such ‘narrow-band’ noises can be difficult to identify from simple inspection of signal traces or variance levels, yet degrade estimates of turbulence statistics, in particular covariances (used to calculate Reynolds shear stress). This paper demonstrates the usefulness of spectral analysis to detect and characterize narrow-band noise components in turbulent flow records. Statistical principles underlying the use of spectral analysis for noise detection are briefly reviewed. Examples of u and v velocity spectra and cospectra are then presented from actual EMCM velocity records from flume and field deployments that were found to be contaminated by such noises. The sensitivity of the shear stress estimates to even minor noise levels is demonstrated. The use of spectral analysis to correct variance (turbulence intensity) and covariance (shear stress) estimates obtained from records contaminated by narrow-band noise is also illustrated.     

Characterization of hydraulic suitability of Chinese sturgeon (Acipenser sinensis) spawning habitat in the Yangtze River

Hydrodynamic flow fields affect the ecological processes such as the water diversity and the distribution of organisms. Understanding the hydrodynamic and ecological processes is critical for the restoration and protection of especially fragile ecological habitats in river systems. This study uses turbulent flow to characterize the ecological behaviour of Chinese Sturgeon (Acipenser sinensis) in the Yangtze River. The Delft3D‐Flow model, which is first validated with field‐measured data, is used to simulate the flow field within spawning habitats of Chinese Sturgeon, downstream of Gezhouba Dam. The model‐simulated turbulent kinetic energy (TKE) and its distribution pattern are then used to characterize the hydraulic environment of the fish's spawning habitat. For the spawning habitat, downstream of Gezhouba Dam, the lower limit of TKE for the Chinese Sturgeon egg mass field is 0.025 m²/s², which occurs at a velocity less than 1.7 m/s. Chinese Sturgeon prefers habitats with TKE range of 0.010 ~ 0.015 m²/s² for resting. This suggests that discharge regimes provide the basis for ecological regulation of the Three Gorges Reservoir and the scientific reference for river management. Copyright © 2011 John Wiley & Sons, Ltd.