Interaction between the controls on fluvial system development: tectonics,climate, base level and river capture – Rio Alias,Southeast Spain

Fluvial systems in uplifting terrain respond to tectonic, climatic, eustatic and local base‐level controls modified by specific local factors, such as river capture. The Rio Alias in southeast Spain is an ephemeral, transverse‐to‐structure fluvial system. The river drains two interconnected Neogene sedimentary basins, the Sorbas and Almeria basins, and crosses two major geological structures, the Sierras de Alhamilla/Cabrera and the Carboneras Fault Zone. Regional epeirogenic uplift resulted in sustained fluvial incision during the Quaternary, punctuated by major climatically driven periods of aggradation and dissection, which created a suite of five river terraces. The river terrace sequence was radically modified in the late Pleistocene by a major river capture (itself a response to regional tectonics), localized tectonic activity and eustatic base‐level change. The Rio Alias is defined by four reaches; within each the climatically‐generated, region‐wide, fluvial response was modified by tectonics, base‐level change or river capture to varying degrees. In the upper part of the basin (Lucainena reach), climate was the dominant control on river development, with limited modification of the sequence by uplift of the Sierra Alhamilla and local drainage reorganization by a local river capture. Downstream of the Sierra Alhamilla in the Polopus reach, the climatic signal is dominant, but its expression is radically modified by the response to a major river capture whereby the Alias system lost up to 70% of its pre‐capture drainage area. In the reach adjacent to the Carboneras Fault Zone (Argamason reach), modification of the terrace sequence by local tectonic activity and a resultant local base‐level fall led to a major local incisional event (propagating c. 3–4 km upstream from the area of tectonic disturbance). At the seaward end of the system (El Saltador reach) Quaternary sea‐level changes modified the patterns of erosion and incision and have resulted in steep incisional terrace profiles. The signals generated by regional tectonics and the Quaternary climate change can be identified throughout the basin but those generated by ongoing local tectonics, river capture and sea‐level change are spatially restricted and define the four reaches. The connectivity of the system from the headwaters to the coast decreased through time as incision progressed, resulting in changes in local coupling characteristics. Copyright © 2012 John Wiley & Sons, Ltd.     

Preservation of the last aggradation phase in climate-driven terraces: Evidence from Late Quaternary reach-specific fluvial dynamics of the Allier River (France)

There is limited knowledge about the preservation of aggradation phases in Quaternary fluvial records. Previous numerical modelling of erosion and deposition in Late Quaternary Allier River (France) generated the prediction that this river has reach-specific fluvial dynamics related to climate-driven tributary sediment-flux dynamics. To test this prediction, new optically stimulated luminescence (OSL) samples were collected of the Late Quaternary Fx terrace at five locations along a stretch of 60 km. OSL dates of both quartz and feldspar sand grains indicate that all relatively basalt-poor sediments display significantly different ages for each reach (ranging from 36.3 ± 2.0 to 21.1 ± 2.3 ka). The more basalt-rich terrace body consistently yields ages in the range 21.1 ± 1.7 to 16.1 ± 1.5 ka, suggesting contemporaneous aggradation along the whole studied Allier reach during this interval. Our own new OSL date of a Tartaret eruption around 16.8 ± 2.5 ka also fits this time window, suggesting a direct link with volcanic activity. However, there are many more dated volcanic events that coincide with the older basalt-poor units, making it less likely that a direct link between terrace-sediment basalt content and volcanic activity exists. The timings of the dated depositional events in MIS 3 and 2 all match with simulated climate drivers and published landscape erosion rates. Counterintuitively, the volcanic Chaîne des Puys area supplied more sediment during the cold and dry Last Glacial Maximum. Basalt content in the Allier terrace sediments reflects climate-related sediment-flux dynamics upstream. The scarcity of older basalt-poor sediment bodies from MIS 4 and 3 in the Fx terrace suggests that less sediment was supplied and/or the intermittent erosional phases in the Allier were very effective at removing them. We hypothesize that this observation of predominant preservation of the last aggradation phase could be a common phenomenon in most climate-driven terraces. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.     

Late Quaternary deformation on the island on Pantelleria: New constraints for the recent tectonic evolution of the Sicily Channel Rift (southern Italy)

Structural observations carried out on the volcanic Island of Pantelleria show that the tectonic setting is dominated by NNE trending normal faults and by NW-striking right-lateral strike-slip faults with normal component of motion controlled by a ≈N 100°E oriented extension. This mode of deformation also controls the development of the eruptive fissures, dykes and eruptive centres along NNE–SSW belts that may thus represent the surface response to crustal cracking with associated magma intrusions. Magmatic intrusions are also responsible for the impressive vertical deformations that affect during the Late Quaternary the south-eastern segment of the island and producing a large dome within the Pantelleria caldera complex. The results of the structural analysis carried out on the Island of Pantelleria also improves the general knowledge on the Late Quaternary tectonics of the entire Sicily Channel. ESE–WNW directed extension, responsible for both the tectonic and volcano-tectonic features of the Pantelleria Island, also characterizes, at a greater scale, the entire channel as shown by available geodetic and seismological data. This mode of extension reactivates the older NW–SE trending fault segments bounding the tectonic troughs of the Channel as right-lateral strike-slip faults and produces new NNE trending pure extensional features (normal faulting and cracking) that preferentially develop at the tip of the major strike-slip fault zones. We thus relate the Late Quaternary volcanism of the Pelagian Block magmatism to dilatational strain on the NNE-striking extensional features that develop on the pre-existing stretched area and propagate throughout the entire continental crust linking the already up-welled mantle with the surface.     

Monitoring and numerical modelling of riverbank erosion processes: a case study along the Cecina River (central Italy)

Riverbank retreat along a bend of the Cecina River, Tuscany (central Italy) was monitored across a near annual cycle (autumn 2003 to summer 2004) with the aim of better understanding the factors influencing bank changes and processes at a seasonal scale. Seven flow events occurred during the period of investigation, with the largest having an estimated return period of about 1·5 years. Bank simulations were performed by linking hydrodynamic, fluvial erosion, groundwater flow and bank stability models, for the seven flow events, which are representative of the typical range of hydrographs that normally occur during an annual cycle. The simulations allowed identification of (i) the time of onset and cessation of mass failure and fluvial erosion episodes, (ii) the contributions to total bank retreat made by specific fluvial erosion and mass‐wasting processes, and (iii) the causes of retreat. The results show that the occurrence of bank erosion processes (fluvial erosion, slide failure, cantilever failure) and their relative dominance differ significantly for each event, depending on seasonal hydrological conditions and initial bank geometry. Due to the specific planimetric configuration of the study bend, which steers the core of high velocity fluid away from the bank at higher flow discharges, fluvial erosion tends to occur during particular phases of the hydrograph. As a result fluvial erosion is ineffective at higher peak discharges, and depends more on the duration of more moderate discharges. Slide failures appear to be closely related to the magnitude of peak river stages, typically occurring in close proximity to the peak phase (preferentially during the falling limb, but in some cases even before the peak), while cantilever failures more typically occur in the late phase of the flow hydrograph, when they may be induced by the cumulative effects of any fluvial erosion. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of soil‐surface types on the overall runoff of the Tabernas badlands (south‐east Spain): field data and model approaches

The Tabernas desert, an extensive badlands area in Almeria province (south‐east Spain), is characterized by a high variability in soil surface cover and soil properties along with important topographical contrasts giving rise to a wide range of hydrological behaviour. A double approach through field monitoring and modelling has been used to ascertain the influence of soil‐surface variability on the overall hydrological response. Small plots were monitored for 3 years to assess runoff from the different surface types. Data provided by the long‐term monitoring of three small catchments formed by different soil surfaces were used to find out the specific contribution of each soil surface to the catchment runoff. A simple spatially distributed model was built to predict runoff generation based on the infiltration rate of each soil‐surface type (defined as terrain units with the same cover, the same soil type and on the same landform). Plot results prove that the soil surface units within the study area behave differently in terms of hydrological response to natural rainfall. These responses are explained by the types of cover, topographical characteristics and soil properties. When runoff events are simple (with one or two runoff peaks), the modelled hydrographs reproduce the hydrographs observed reasonably well, but in complex events (with several runoff peaks) the adjustment is not as good. The model also shows the influence of the spatial distribution of soil surfaces on the overall runoff, aiding exploration of the spatial hydrological relationships among different landscape units. Copyright © 2002 John Wiley & Sons, Ltd.     

A 3-d model of quaternary terrace development,simulations of terrace stratigraphy and valley asymmetry: A case study for the allier terraces (limagne,France)

The combined effects of climate and tectonism on general terrace stratigraphy and valley asymmetry during the last half million years in the Allier system (France) are simulated by a 3-D conceptual model (LIMTER). This model allows the formulation and evaluation of long term terrace formation scenarios for the Allier system. Simulation results suggest that terrace stratigraphy in the study area is mainly the result of internal dynamics and climatic change. Local tectonism contributed to the development of unpaired terraces while the general regional uplift played a dominant role in determining terrace formation and preservation in general.