Petrology,Geochemistry, and Fluid Inclusion Microthermometry of Sphalerite from the Laloki and Federal Flag Strata‐Bound Massive Sulfide Deposits,Papua New Guinea: Implications for Gold Mineralization

The Laloki and Federal Flag deposits are two of the many (over 45) polymetallic massive sulfide deposits that occur in the Astrolabe Mineral Field, Papua New Guinea. New data of the mineralogical compositions, mineral textures, and fluid inclusion studies on sphalerite from Laloki and Federal Flag deposits were investigated to clarify physiochemical conditions of the mineralization at both deposits. The two deposits are located about 2 km apart and they are stratigraphically hosted by siliceous to carbonaceous claystone and rare gray chert of Paleocene–Eocene age. Massive sulfide ore and host rock samples were collected from each deposit for mineralogical, geochemical, and fluid inclusion studies. Mineralization at the Laloki deposit consists of early‐stage massive sulfide mineralization (sphalerite‐barite, chalcopyrite, and pyrite–marcasite) and late‐stage brecciation and remobilization of early‐stage massive sulfides that was accompanied by late‐stage sphalerite mineralization. Occurrence of native gold blebs in early‐stage massive pyrite–marcasite‐chalcopyrite ore with the association of pyrrhotite‐hematite and abundant planktonic foraminifera remnants was due to reduction of hydrothermal fluids by the reaction with organic‐rich sediments and seawater mixing. Precipitation of fine‐grained gold blebs in late‐stage Fe‐rich sphalerite resulted from low temperature and higher salinity ore fluids in sulfur reducing conditions. In contrast, the massive sulfide ores from the Federal Flag deposit contain Fe‐rich sphalerite and subordinate sulfarsenides. Native gold blebs occur as inclusions in Fe‐rich sphalerite, along sphalerite grain boundaries, and in the siliceous‐hematitic matrix. Such occurrences of native gold suggest that gold was initially precipitated from high‐temperature, moderate to highly reduced, low‐sulfur ore fluids. Concentrations of Au and Ag from both Laloki and Federal Flag deposits were within the range (<10 ppm Au and <100 ppm Ag) of massive sulfides at a mid‐ocean ridge setting rather than typical arc‐type massive sulfides. The complex relationship between FeS contents in sphalerite and gold grades of both deposits is probably due to the initial deposition of gold on the seafloor that may have been controlled by factors such as Au complexes, pH, and fO₂ in combination with temperature and sulfur fugacity.     

Metallogenesis and hydrothermal evolution of the Tonggou Cu deposit in the Eastern Tianshan: Evidence from fluid inclusions,H-O-S isotopes,and Re-Os geochronology

The Tonggou Cu polymetallic deposit in the Bogda Orogenic Belt, Eastern Tianshan shows evidence for three stages of hydrothermal mineralization: early pyrite veins (Stage 1), polymetallic sulfide ± epidote–quartz (Stage 2), and late-stage pyrite–calcite veins (Stage 3). Fluid inclusion petrography and microthermometry analyses indicate that the liquid-rich aqueous inclusions (L), vapour-rich aqueous inclusions (V), and NaCl daughter mineral–bearing three phase inclusions (S) formed during the main stage of mineralization, and that the ore fluids represent high-temperature and high-salinity H₂O-NaCl hydrothermal fluids that underwent boiling. Stable isotope (H, O) data indicate that the ore fluids of the Tonggou deposit were originally derived from magmatic water in Stage 2 and subsequently mixed with local meteoric water during Stage 3. Sulphur isotope compositions (6.7‰ to 10.9‰) are consistent with the δ³⁴S values of pyrite from the Qijiaojing Formation sandstone, indicating the primary source of the sulphur ore. Furthermore, chalcopyrite grains separated from the chalcopyrite-rich ore samples yield an isochron age of 303 ± 12 Ma (MSWD = 1.2). These results indicate that the Tonggou deposit is a transition between high–sulfidation and porphyry deposits which formed in the Late Carboniferous. It also suggests an increased likelihood for the occurrence of Cu (Au, Mo) in the Bogda Orogenic Belt, especially at locations where the Cu-Zn deposits are thicker; further deep drilling and exploration are encouraged in these areas.     

粤北大宝山铜多金属矿区黄铁矿与磁黄铁矿EPMA和LA-ICP-MS原位微区组分特征及其对矿床成因机制约束

粤北大宝山铜多金属矿床一直存在燕山期岩浆热液成因和海西期火山喷流成因之争,争议的焦点在于块状、似层状硫化物矿体的成因。本文在全面开展矿区地质调查和钻探查证的基础上,对块状、似层状和脉状硫化物矿石中的黄铁矿和磁黄铁矿开展EPMA和LA-ICP-MS原位分析。测试结果表明,不同产状黄铁矿的平均分子式相似,分别为FeS_(1.98)、FeS_(1.99)和FeS_(1.98),似层状和脉状硫化物中磁黄铁矿的平均化学式为Fe_(0.886)S和Fe_(0.874)S,属形成温度相对较低单斜磁黄铁矿。与花岗岩岩浆热液标型黄铁矿相比,不同产状的黄铁矿和磁黄铁矿中Co、Ni、Mn、Se和Ge等元素以类质同象形式赋存,它们含量较低但稳定,Cu、Pb、Zn、Ag、Bi和Tl及Ga主要以微细矿物子晶形式存在,其含量丰富,但变化明显。从块状、似层状到脉状硫化物矿体,黄铁矿和磁黄铁矿中Co、Zn和Se的含量及Co/Ni值降低,而Cu、Pb、Ag、Bi等元素的含量明显升高。结合矿区次英安斑岩的产状和含矿性特征表明,大宝山矿床块状、似层状和脉状硫化物矿体都是次英安斑岩深部岩浆房产出的含矿流体在不同赋矿环境中的产物。     

Deciphering a multistage history affecting U–Cu(–Fe) mineralization in the Singhbhum Shear Zone,eastern India,using pyrite textures and compositions in the Turamdih U–Cu(–Fe) deposit

The ～200-km-long intensely deformed Singhbhum Shear Zone (SSZ) in eastern India hosts India’s largest U and Cu deposits and related Fe mineralization. The SSZ separates an Archaean cratonic nucleus to the south from a Mesoproterozoic fold belt in the North and has a complex geologic history that obscures the origin of the contained iron-oxide-rich mineral deposits. This study investigates aspects of the history of mineralization in the SSZ by utilizing new petrographic and electron microprobe observations of pyrite textures and zoning in the Turamdih U–Cu(–Fe) deposit. Mineralization at Turamdih is hosted in intensively deformed quartz–chlorite schist. Sulfides and oxides include, in inferred order of development: (a) magmatic Fe(–Ti–Cr) oxide and Fe–Cu(–Ni) sulfide minerals inferred to be magmatic (?) in origin; followed by (b) uranium, Fe-oxide, and Fe–Cu(–Co) sulfide minerals that predate most or all ductile deformation, and are inferred to be of hydrothermal origin; and (c) Fe–Cu sulfides that were generated during and postdating ductile deformation. These features are associated with the formation of three compositionally and texturally distinct pyrites. Pyrite (type-A), typically in globular–semiglobular composite inclusions of pyrite plus chalcopyrite in magnetite, is characterized by very high Ni content (up to 30,700 ppm) and low Co to Ni ratios (0.01–0.61). The textural and compositional characteristics of associated chalcopyrite and rare pyrrhotite suggest that this pyrite could be linked to the magmatic event via selective replacement of magmatic pyrrhotite. Alternatively, this pyrite and associated sulfide inclusions might be cogenetic with hydrothermal Fe-oxide. Type-B pyrite that forms elongate grains and irregular relics and cores of pyrite with high Co contents (up to 23,630 ppm) and high Co to Ni ratios (7.2–140.9) are interpreted to be related to hydrothermal mineralization predating ductile deformation. A third generation of pyrite (type C) with low Co, low Ni, and moderate Co to Ni ratios (0.19–13.93) formed during and postdating the ductile deformation stage overgrowing, replacing, and surrounding type-B pyrite. The textural evolution of pyrite parallels the tectonometamorphic evolution of the shear zone demonstrating grain elongation during progressive ductile deformation and prograde metamorphism, annealing at the peak metamorphic condition, porphyroblastic growth at the retrograde path and cataclasis following porphyroblastic growth. Compositional characteristics of hydrothermal pyrite and available geological information suggest that the U–Cu(–Fe) deposit at Turamdih might be a variant of the Fe oxide (–Cu–U–rare earth elements) family of deposits.     

The Wilga base-precious metals deposit, Benambra, Victoria, Australia

Wilga is one of several Au-bearing volcanogenic massive sulphide deposits localized within Silurian felsic volcanics of the Lachlan Fold Belt of NE Victoria. Exploration has delineated a resource of 3.7 Mt averaging 3.4% Cu, 5.5% Zn, 0.4% Pb, 31 g/t Ag and 0.5 g/t Au within a lensoid-shaped sulphide body which strikes NE, dips NW and occurs at a depth of 50–160 m below surface. This body has maximum dimensions of 470 m strike, 350 m down-dip and 37 m true width delineated by 59 surface diamond drill holes and an exploration adit with 40 underground diamond drill holes. There are two main types of mineralization: Stratiform massive sulphides , (mainly pyrite, low-Fe sphalerite, variable chalcopyrite and minor galena with very minor silica/dolomite gangue) and Stratiform chloritic sulphides (mainly chalcopyrite, with subordinate pyrite and sphalerite, in a gangue of chlorite and minor dolomite). The deposit is layered with at least 6 distinct stratigraphic horizons/cycles of mineralization each characterized by a Cu-rich base and Pb-(Zn)-Au-As-rich top. Facies variations are locally rapid. Economically the deposit consists of 3 sub-lenses of roughly equal tonnage: a Cu-rich central lens of Chloritic Sulphides (av. 5.9% Cu, 3.6% Zn, 0.3% Pb, 32 g/t Ag and 0.2 g/t Au) between upper and lower lenses of Zn-rich Massive Sulphides (av. 1.8% Cu, 6.7% Zn, 0.5% Pb, 31 g/t Ag and 0.7 g/t Au). Gold mineralization, locally up to 7 g/t over 6 m, shows a strong spatial association with Pb, (Zn) and As in pyritic massive sulphides.     

Genesis of the Bianjiadayuan Pb-Zn polymetallic deposit,Inner Mongolia,China:Constraints from in-situ sulfur isotope and trace element geochemistry of pyrite

The Southern Great Xing'an Range(S(GXR)which forms part of the eastern segment of the Central Asian Orogenic Belt(CAOB)is known as one of the most important Cu-Mo-Pb-Zn-Ag-Au metallogenic belts in China,hosting a number of porphyry Mo(Cu),skarn Fe(Sn),epithermal Au-Ag,and hydrothermal veintype Ag-Pb-Zn ore deposits.Here we investigate the Bianjiadayuan hydrothermal vein-type Ag-Pb-Zn ore deposit in the southern part of the SGXR.Porphyry Sn± Cu± Mo mineralization is also developed to the west of the Ag-Pb-Zn veins in the ore field.We identify a five-stage mineralization process based on field and petrologic studies including(i)the early porphyry mineralization stage,(ii)main porphyry mineralization stage,(iii)transition mineralization stage,(iv)vein-type mineralization stage and(v)late mineralization stage.Pyrite is the predominant sulfide mineral in all stages except in the late mineralization stage,and we identify corresponding four types of pyrites:Pyl is medium-grained subhedral to euhedral occurring in the early barren quartz vein;Py2 is medium-to fine-grained euhedral pyrite mainly coexisting with molybdenite,chalcopyrite,minor sphalerite and galena;Py3 is fine-grained,subhedral to irregular pyrite and displays cataclastic textures with micro-fractures;Py4 occurs as euhedral microcrystals and forms irregularly shaped aggregate with sphalerite and galena.LA-ICP-MS trace element analyses of pyrite show that Cu,Pb,Zn,Ag,Sn,Cd and Sb are partitioned into pyrite as structurally bound metals or mineral micro/nano-inclusions,whereas Co,Ni,As and Se enter the lattice via isomorphism in all types of pyrite.The Cu,Zn,Ag,Cd concentrations gradually increase from Pyl to Py4,which we correlate with cooling and mixing of ore-forming fluid with meteoric water.Py2 contains the highest contents of Co,Ni,Se,Te and Bi,suggesting high temperature conditions for the porphyry mineralization stage.Ratios of Co/Ni(0.03-10.79,average 2.13)and sulphur isotope composition of sulfide indicate typical hydrothermal origin for pyrites.The δ~(34)S_(cDT) values of Pyl(0.42‰-1.61‰,average1.16‰),Py2(-1.23‰to 0.82‰,average 0.35‰),Py3(—0.36‰to 2.47‰average 0.97‰).Py4(2.51‰--3.72‰,average 3.06‰),and other sulfides are consistent with those of typical porphyry deposit(-5‰to 5‰),indicating that the Pb-Zn polymetallic mineralization in the Bianjiadayuan deposit is genetically linked to the Yanshanian(Jurassic-Cretaceous)magmatic-hydrothermal events.Variations of δ~(34) S values are ascribed to the changes in physical and chemical conditions during the evolution and migration of the ore-forming fluid.We propose that the high Sn content of pyrite in the Bianjiadayuan hydrothermal vein-type Pb-Zn polymetallic deposit can be used as a possible pathfinder to prospect for Sn mineralization in the surrounding area or deeper level of the ore field in this region.     

Different mineralization styles in a volcanic-hosted ore deposit: the fluid and isotopic signatures of the Mt Morgan Au–Cu deposit,Australia

Quantitative laser ablation (LA)-ICP-MS analyses of fluid inclusions, trace element chemistry of sulfides, stable isotope (S), and Pb isotopes have been used to discriminate the formation of two contrasting mineralization styles and to evaluate the origin of the Cu and Au at Mt Morgan.The Mt Morgan Au–Cu deposit is hosted by Devonian felsic volcanic rocks that have been intruded by multiple phases of the Mt Morgan Tonalite, a low-K, low-Al₂O₃ tonalite–trondhjemite–dacite (TTD) complex. An early, barren massive sulfide mineralization with stringer veins is conforming to VHMS sub-seafloor replacement processes, whereas the high-grade Au–Cu ore is associated with a later quartz–chalcopyrite–pyrite stockwork mineralization that is related to intrusive phases of the Tonalite complex. LA-ICP-MS fluid inclusion analyses reveal high As (avg. 8850 ppm) and Sb (avg. 140 ppm) for the Au–Cu mineralization and 5 to 10 times higher Cu concentration than in the fluids associated with the massive pyrite mineralization. Overall, the hydrothermal system of Mt Morgan is characterized by low average fluid salinities in both mineralization styles (45–80% seawater salinity) and temperatures of 210 to 270 °C estimated from fluid inclusions. Laser Raman Spectroscopic analysis indicates a consistent and uniform array of CO₂-bearing fluids. Comparison with active submarine hydrothermal vents shows an enrichment of the Mt Morgan fluids in base metals. Therefore, a seawater-dominated fluid is assumed for the barren massive sulfide mineralization, whereas magmatic volatile contributions are implied for the intrusive related mineralization. Condensation of magmatic vapor into a seawater-dominated environment explains the CO₂ occurrence, the low salinities, and the enriched base and precious metal fluid composition that is associated with the Au–Cu mineralization. The sulfur isotope signature of pyrite and chalcopyrite is composed of fractionated Devonian seawater and oxidized magmatic fluids or remobilized sulfur from existing sulfides. Pb isotopes indicate that Au and Cu originated from the Mt Morgan intrusions and a particular volcanic strata that shows elevated Cu background.     

Mineralogy,microchemistry and fluid inclusion studies of the Besshi-type Nudeh Cu-Zn VMS deposit,Iran

The southwestern Sabzevar basin is the north of Central Iranian Microcontinent hosts abundant mineral deposits, including exhalative Mn mineralization and Cu-Zn volcanogenic massive sulfide (VMS) deposits. Amongst them, the Nudeh Besshi-type Cu–Zn volcanogenic massive sulfide (VMS) deposit is hosted within the lower part of a Late Cretaceous volcano-sedimentary sequence composed of alkali olivine basalt flows and tuffaceous silty sandstone. Based on investigations into the ore geometry, mineralogy, and texture, we recognized three different ore facies: (1) a stockwork of sulfide-bearing quartz veins cutting across the footwall volcano-sedimentary rocks and representing the stringer zone; (2) a massive ore type, displaying replacement texture with pyrite, chalcopyrite, sphalerite, friedrichite, and minor magnetite; and (3) a bedded ore type, with laminated to disseminated pyrite and chalcopyrite. EPMA studies indicate a distinctive minor element distribution between the different ore types of the Nudeh deposit. The Fe content in the sphalerite ranges from 0.65–1.80?wt.%, indicating the Fe-poor nature of the sphalerite. However, the Cd content in sphalerite ranged between 0.164–0.278?wt.%. According to the mineral compositions, Zn, Se, and Ag are found in bornite as minor elements. In the bedded ore facies, the pyrite contains higher levels of Se (up to 0.35?wt.%). The Zn content in the friedrichite in all of the ore samples is low. The Co/Ni ratios in pyrite from the Nudeh ore are lower than those of most magmatic deposits, but are similar to those from volcanogenic deposits, and hence support the proposed hydrothermal origin of the deposit. Two generations of quartz, Q1 and Q2 in the stockwork veins, contain primary fluid inclusions and these contain two phases (liquid and vapor). The lack of vapor-rich inclusions or variable liquid/vapor ratios indicate that the fluids did not boil at the site of trapping. Salinity for both Q1 and Q2 fluid inclusions ranges between 2.2–6.8?wt.% eq. NaCl. Homogenization temperatures for inclusions in the Q1 and Q2 veins average at about 296?°C and are similar to the temperatures of hydrothermal fluids discharged through vents in many modern seafloor VMS deposit. The Nudeh Besshi-type VMS deposit appears to have formed on the seafloor and based on the salinity and temperature constraints from the underlying stockwork, a buoyancy plume model is proposed as a mechanism for precipitation.     

The Ashele Deposit: A Recently Discovered Volcanogenic Massive Sulfide Cu-Zn Deposit in Xinjiang, China

Abstract: The Ashele Cu-Zn deposit is a recently discovered volcanogenic massive sulfide deposit in Xinjiang, Northwestern China. It is the largest Cu-Zn deposit in this type of deposits in China, which were formed in the early period of later Palaeozoic Era. This deposit is hosted within a suit of bimodal submarine volcanic rocks of the Ashele Formation of Lower-Middle Devonian System formed in an environment of paleocontinental margin rift setting. Lensoid orebodies occur between spilitic rocks developed at footwall and quartz-keratophyric tuff at hanging wall. Zonation of metal elements in the Ashele mine is one of typical volcanic-related exhalative Cu-Zn sulfide deposits in the world. Black ores enriched in Pb, Zn and Ag occurs on the top of the No. 1 orebody in the Ashele deposit, yellow ores enriched in Cu in the middle part, and the chalcopyritization stringer below the massive sulfide ores. Zonation of ore-structure in the No. 1 orebody is also apparent and corresponds to the zoning of elements, i. e. lamellar and/or banded sulfide-sulfate ores on the top, massive sulfide ores in the middle, and stockwork veinlets associated with altered breccia pipe on the bottom. Four epochs of mineralization in the Ashele deposit has been recognized. The first period of syngenetic-exhalative deposition of sulfides is the main epoch of mineralization, and the ores deposited subsequently subjected to thermo-metamorphism at the second epoch, superimposed by hydrothermal mineralization at the third epoch, and weathered or oxidized at the fourth epoch.
More than 100 categories of minerals have been recognized in the Ashele mine, but only pyrite, chalcopyrite, sphalerite, tetrahedrite, galena, barite, quartz, chlorite, sericite, and calcite are dominant, making up various types of ores, and alteration pipes or horizons. Studies of ore petrology suggest that the massive ores were volcanogenic and deposited by exhalative process.     

A hydrothermal origin for the large Xinqiao Cu-S-Fe deposit,Eastern China: Evidence from sulfide geochemistry and sulfur isotopes

The Xinqiao Cu-S-Fe deposit in the Tongling ore district, Middle-Lower Yangtze River Valley Metallogenic Belt (MLYB; Eastern China), is located along the northern margin of the Yangtze Craton. The stratiform- and skarn-type Xinqiao mineralization comprises five stages, namely the early skarn (Stage I, garnet and diopside), late skarn (Stage II, epidote-dominated), iron oxides (Stage III, hematite and magnetite), colloform pyrite (Stage IV) and quartz-sulfides (Stage V). There are three pyrite types at Xinqiao, i.e., colloform (Py1; Stage IV), fine-grained (Py2, from Py1 recrystallization; Stage V) and coarse-grained (Py3; Stage V) pyrites.Scanning Electron Microscope (SEM) imagery for Py1 reveals that they are cubic microcrystalline pyrite aggregates, and the EDS and XRD data indicate that some Py1 contain minor siderite impurities. Electron Microprobe Analysis (EMPA) and LA-ICP-MS geochemical data demonstrate that the three pyrite types have relatively high Fe/S ratios and distinctly high Mn, Cu and As concentrations. Compared to Py2 and Py3, Py1 has higher Pb, Bi and Ag, but lower Co, Ni, Se, Cd, Te and Au. Ratios of Fe/S (0.837 to 0.906), Se/Te (2.39 to 14.50) and Co/Ni (0.67 to 4.67) of the Xinqiao pyrites resemble typical hydrothermal pyrites. δ³⁴S_CDT of Py1 (− 0.6‰ to 2.7‰, average 0.58‰), Py2 (1.8‰ to 2.5‰, average 2.1‰) and Py3 (1.9‰ to 4.4‰, average 3.5‰) are close to those of the Xinqiao skarn-type orebodies (1.3‰ to 4.1‰), but distinct from those of the Upper Carboniferous Huanglong Formation limestone (− 9.5‰ to − 15.4‰), suggesting that the three pyrite types (especially Py1) were genetically linked to the Yanshanian (Jurassic-Cretaceous) magmatic-hydrothermal events, with Py1 probably reflecting rapid crystallization during fluid mixing. We interpret that the Xinqiao stratiform mineralization may have been associated with the Jitou quartz diorite stock, as may be the case also for the skarn-type mineralization hosted in the contact between the Yanshanian Jitou stock and the Lower Permian Qixia Formation limestone. Overall, the Xinqiao Cu-S-Fe mineralization may have been generated by the Jurassic-Cretaceous tectono-thermal event in Eastern China.     

The Aitik Cu–Au–Ag deposit in northern Sweden: a product of high salinity fluids

The Aitik Cu–Au–Ag deposit is located in northern Sweden and is hosted by strongly deformed 1.9 Ga Svecofennian volcano-sedimentary rocks. The main copper mineralization, which occurs as disseminations and veinlets, is hosted by garnet–biotite schist. Subeconomic mineralization in the footwall to the ore is hosted by feldspar–biotite–amphibole gneiss and porphyritic quartz monzodiorite. The deposit has been affected by post-mineralization metamorphic and igneous activity. Fluid inclusions in six samples of copper-mineralized quartz veins record the presence of three different fluid populations. The main ore was deposited from an aqueous, highly saline (31–37 eq. wt% NaCl + CaCl₂) fluid. This fluid was trapped in inclusions intimately associated with the main chalcopyrite mineralization. Later bornite deposition took place from a less saline (18–27 eq. wt% NaCl + CaCl₂), aqueous fluid. A third fluid composed of almost pure CO₂, interacted with the copper-rich system during a post-ore event. The Aitik Cu–Au–Ag deposit shares some features with both porphyry-type and Fe-oxide–Cu–Au deposits. A high calcium content of the ore fluids, similar to other Cu–Au deposits in northern Scandinavia, suggests a contribution to the salinity of the mainly magmatic-hydrothermal fluids from evaporitic rocks in stratigraphically lower units.     

山东莱州曲家金矿黄铁矿微量元素对成矿过程的指示

曲家金矿位于我国重要的蚀变岩型金矿矿集区之焦家金矿带的中段，矿床赋存标高为-726～-1 334 m。为研究黄铁矿的演化及其对金成矿过程的指示，运用LA-ICP-MS分析黄铁矿原位微量元素含量，结合岩相学观察和点群分析对黄铁矿进行了分类。发现黄铁矿中Co、Ni、As等微量元素主要以类质同像形式赋存，而Au、Ag、Cu、Zn、Pb、Bi等元素主要以纳米级、微米级矿物包裹体形式赋存。黄铁矿主要分为5种类型：富Co型Py1,富Ni型Py2,富Au、As型Py3,富Au、Ag、Pb、Bi型Py4及“干净”型Py5。黄铁矿微量元素特征指示成矿物质可能主要来源于前寒武纪变质基底岩石和中生代岩浆岩，少量来源于地幔，成矿热液可能属变质热液、岩浆热液和浅部大气降水的混合成因。不同类型黄铁矿反映成矿热液由富Co、Ni经富As、Au向富Pb、Bi、Au、Ag演化。Py1和Py2形成后受构造活动影响发生强烈破碎，裂隙表面对热液中金络合物增强的吸附作用促使金在裂隙中沉淀，对金的富集成矿可能起重要作用。Co、Ni含量较低，同时Au、Ag、As、Pb、Bi等元素含量较高的黄铁矿与成矿作用有密切关系。另外，黄铁矿中C...     

Migration paths and precipitation mechanisms of ore-forming fluids at the Shuiyindong Carlin-type gold deposit,Guizhou, China

Shuiyindong is one of the largest and highest grade stratabound Carlin-type gold deposits in China. This paper reports on the results of petrographic studies, electron microprobe analyses (EMPA) of arsenian pyrite, and the mass transfer during mineralization and alteration, and it presents the deposit-scale distributions of Au, As, Sb, Hg, Tl, and trace elements in a representative cross section across the Shuiyindong Carlin-type gold deposit, Guizhou Province. The main objectives were to identify the precipitation mechanisms of minerals, or elements from fluids, and the migration paths of ore-forming fluids.Petrographic and EMPA studies indicate that gold in the primary ores is mainly hosted by arsenian pyrite. Mass transfer associated with alteration and mineralization shows that Au, As, Sb, Hg, Tl, and S were significantly added to all mineralized rocks, Fe₂O₃ and SiO₂ were immobile in the main orebodies that are hosted in bioclastic limestone, and CaO, Na₂O, Sr, and Li were removed from country rocks. The relations between Fe and S indicate that the sedimentary rocks at the Shuiyindong deposit contain more iron than is needed to combine with all of their contained sulfur to form pyrite. This suggests that sulfidation and decarbonation were the principal mechanism of gold precipitation at the Shuiyindong deposit. Hg, Sb, and As commonly formed sulfide minerals, such as stibnite, realgar, and orpiment, in late-stage quartz–calcite veins, or absorbed by organic matter in argillite. Fluid cooling presumably led to depositions of stibnite, realgar, and orpiment in late-stage quartz–calcite veins. Organic matter likely served as a reductant in argillite for the ore fluids, causing the precipitation of As, Sb, Hg, and S, as well as Au.Deposit-scale distributions of gold and other relevant elements reflect the passage of fluids through the rocks. Rock strata and structures allowed the ore-forming fluids to migrate horizontally along the unconformity surface of the Middle–Upper Permian, converge on the high position of an anticline, and then ascend into the overlying strata along the anticlinal axis. The distributions of the major and trace elements show that elements that accompanied the ore-forming fluids include Au, As, Sb, Hg, Tl, and S, and that Na₂O and Li were exhausted in the Longtan Formation at the anticlinal core during gold mineralization. The enrichment of Co, Cr, and Ni in the Longtan Formation at the anticlinal core might be associated with deformation that formed the anticline, or with gold mineralization. Different host rocks were preferentially mineralized by different elements. The bioclastic limestone is commonly enriched in Au, whereas the argillite is preferentially enriched in As, Hg, Sb, and Tl. The zonation of ore-forming elements in the deposit appears to be Sb–Tl–As–Hg–Au–Hg–As (from bottom to top). Enrichment of Au, As, Sb, Hg, and Tl provides useful guidance for the exploration for Carlin-type gold deposits in Guizhou. Anomalies of As and Hg in soil or stream sediment might be an important clue and these elements can be used as indicator elements. Ore-forming fluids migrated along the unconformity surface of the Middle–Upper Permian and the anticlinal axis, so these are favorable sites for exploration for Carlin-type gold deposits in Guizhou.     

Giant Mineral Deposits and Their Geodynamic Setting in the Lanping Basin, Yunnan, China

There are giant mineral deposits, including the Jinding Zn-Pb and Baiyangping Ag-Co-Cu, and otherimportant mineral deposits (e.g., Baiyangchang Ag-Cu, Jinman Cu deposits, etc.) in the Lanping Mesozoic-Cenozoic Basin, Yunnan Province, China. The tabular ore-bodies and some veins hosted in terrestrial clastic rocks of the Mesozoic-Cenozoic age and no outcropping of igneous rocks in the giant deposits lead to the proposal of syngenetic origin, but the giant mineral deposits are not stratabound (e.g. MVT, sandstone- and Sedex-type). They formed in a continental red basin with intense crust movement. The mineralization is controlled by structures and lithology and occurs in different strata, and no sedimentary nature and no exhalative sediments are identified in the deposits. The deposits show some relations with organic matter (now asphalt and petroleum) and evaporates (gypsum). The middle-low-temperature (mainly 110℃ to 280℃) mineralization took place at a depth of about 0.9 km to 3.1 km during the early     

Trace Element Geochemistry of Magnetite from the Fe(-Cu) Deposits in the Hami Region, Eastern Tianshan Orogenic Belt, NW China

Laser ablation–inductively coupled plasma–mass spectrometry(LA–ICP–MS) was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe(–Cu) deposits in the Eastern Tianshan Orogenic Belt. The magnetite from these deposits typically contains detectable Mg, Al, Ti, V, Cr, Mn, Co, Ni, Zn and Ga. The trace element contents in magnetite generally vary less than one order of magnitude. The subtle variations of trace element concentrations within a magnetite grain and between the magnetite grains in the same sample probably indicate local inhomogeneity of ore–forming fluids. The variations of Co in magnetite between samples are probably due to the mineral proportion of magnetite and pyrite. Factor analysis has discriminated three types of magnetite: Ni–Mn–V–Ti(Factor 1), Mg–Al–Zn(Factor 2), and Ga– Co(Factor 3) magnetite. Magnetite from the Heifengshan and Shuangfengshan Fe deposits has similar normalized trace element spider patterns and cannot be discriminated according to these factors. However, magnetite from the Shaquanzi Fe–Cu deposit has affinity to Factor 2 with lower Mg and Al but higher Zn concentrations, indicating that the ore–forming fluids responsible for the Fe–Cu deposit are different from those for Fe deposits. Chemical composition of magnetite indicates that magnetite from these Fe(–Cu) deposits was formed by hydrothermal processes rather than magmatic differentiation. The formation of these Fe(–Cu) deposits may be related to felsic magmatism.     

山西高凡银金矿床黄铁矿的微量元素标型特征及其应用

高凡银金矿床黄铁矿的微量元素研究发现富Au、Ag、Pb、Zn、As、Sb,贫Co、Ni、Se,且S/Se较大,S/As和Fe/(Pb+Zn)较小,As/(Co+Ni)、(Pb+Zn)/(Co+Ni)>10。同时高凡矿田中的滩上铜钼矿化点的黄铁矿则显示相反的特征。总结出一套区分两类矿化黄铁矿微量元素的标型特征,对高凡矿田和五台地区各矿化点的判别和评价中显示了一定的适用性,可作为本区寻找同类金银矿床的找矿标型特征。     

宝山铜钼多金属矿田矿化分带和蚀变组合特征

宝山多金属矿田的矿化产于下石炭统石磴子组灰岩中。以宝岭倒转背斜轴为核心,矿田中部是由矽卡岩型铜钼矿床红组成的铜钼矿带,向外是由多个铅锌银矿床组成的铅锌跟矿带。笔者通过铜钼矿石和东部铅锌银矿石的化学成分,矿物组合及黄铁矿、黝铜矿的标型特征,探讨了宝山多金属矿田的矿化及蚀变组合分分带,并以此作为同类型矿床的找矿标志。     

Metallogeny of precious and base metal mineralization in the Murchison Greenstone Belt, South Africa: indications from U–Pb and Pb–Pb geochronology

The 3.09 to 2.97 Ga Murchison Greenstone Belt is an important metallotect in the northern Kaapvaal Craton (South Africa), hosting several precious and base metal deposits. Central to the metallotect is the Antimony Line, striking ENE for over 35?km, which hosts a series of structurally controlled Sb–Au deposits. To the north of the Antimony Line, hosted within felsic volcanic rocks, is the Copper–Zinc Line where a series of small, ca. 2.97 Ga Cu–Zn volcanogenic massive sulfide (VMS)-type deposits occur. New data are provided for the Malati Pump gold mine, located at the eastern end of the Antimony Line. Crystallizations of a granodiorite in the Malati Pump Mine and of the Baderoukwe granodiorite are dated at 2,964?±?7 and 2,970?±?7?Ma, respectively (zircon U–Pb), while pyrite associated with gold mineralization yielded a Pb–Pb age of 2,967?±?48?Ma. Therefore, granodiorite emplacement, sulfide mineral deposition and gold mineralization all happened at ca. 2.97?Ga. It is, thus, suggested that the major styles of orogenic Au–Sb and the Cu–Zn VMS mineralization in the Murchison Greenstone Belt are contemporaneous and that the formation of meso- to epithermal Au–Sb mineralization at fairly shallow levels was accompanied by submarine extrusion of felsic volcanic rocks to form associated Cu–Zn VMS mineralization.     

Source and possible tectonic driver for Jurassic–Cretaceous gold deposits in the West Qinling Orogen,China

The West Qinling Orogen (WQO) in Central China Orogenic Belt contains numerous metasedimentary rock-hosted gold deposits (>2000 t Au), which mainly formed during two pulses: one previously recognized in the Late Triassic to Early Jurassic (T3–J1) and one only recently identified in the Late Jurassic to Early Cretaceous (J3–K1). Few studies have focused on the origin and geotectonic setting of the J3–K1 gold deposits.Textural relationships, LA-ICP-MS trace element and sulfur isotope compositions of pyrites in hydrothermally altered T3 dykes within the J3–K1 Daqiao deposit were used to constrain relative timing relationships between mineralization and pyrite growth in the dykes, and to characterize the source of ore fluid. These results are integrated with an overview of the regional geodynamic setting, to advance understanding of the tectonic driver for J3–K1 hydrothermal gold systems. Pyrite in breccia- and dyke-hosted gold ores at Daqiao have similar chemical and isotopic compositions and are considered to be representative of J3–K1 gold deposits in WQO. Co/Ni and sulfur isotope ratios suggest that ore fluids were derived from underlying Paleozoic Ni- and Se-rich carbonaceous sedimentary rocks. The geochemical data do not support the involvement of magmatic fluids. However, in the EQO (East Qinling Orogen), J3–K1 deposits are genetically related to magmatism. Gold mineralization in WQO is contemporaneous with magmatic deposits in the EQO and both are mainly controlled by NE- and EW-trending structures produced by changes in plate motion of the Paleo-Pacific plate as it was subducted beneath the Eurasian continent. We therefore infer that the J3–K1 structural regime facilitated the ascent of magma in the EQO and metamorphic fluids in the WQO with consequent differences in the character of contemporaneous ore deposits. If this is correct, then the far-field effects of subduction along the eastern margin of NE Asia extended 1000's of km into the continental interior.     

Geological Characteristics and Metallogenic Setting of Representative Magmatic Cu‐Ni Deposits in the Tianshan‐Xingmeng Orogenic Belt,Central Asia

A great number of magmatic Cu-Ni deposits(including Kalatongke in Xinjiang and Hongqiling in Jilin) are distributed over a distance of almost 3000 km across the Tianshan-Xingmeng Orogenic Belt, from Tianshan Mountains in Xinjiang in the west, to Jilin in eastern China in the east. These deposits were formed during a range of magmatic episodes from the Devonian to the Triassic. Significant magmatic Cu-Ni-Co-PGE deposits were formed from the Devonian period in the Nalati arc(e.g. Jingbulake Cu-Ni in Xinjiang), Carboniferous period in the Puerjin-Ertai arc(e.g. Kalatongke Cu-Ni-Co-PGE in Xinjiang), Carboniferous period in the Dananhu-Touquan arc(e.g. Huangshandong, Xiangshan and Tulaergen in estern Tianshan, Xinjiang) to Triassic period in the Hulan arc(e.g. Hongqiling Cu-Ni in Jilin). In addition to the overall tectonic, geologic and distribution of magmatic Cu-Ni deposits in the Tianshan-Xingmeng Orogenic Belt, the metallogenic setting, deposit geology and mineralization characteristics of each deposit mentioned above are summarized in this paper. Geochronologic data of Cu-Ni deposits indicate that, from west to east, the metallogenic ages in the Tianshan-Xingmeng Orogenic Belt changed with time, namely, from the Late Caledonian(～440 Ma), through the Late Hercynian(300–265 Ma) to the Late Indosinian(225–200 Ma). Such variation could reflect a gradual scissor type closure of the paleo Asian ocean between the Siberia Craton and the North China Craton from west to east.